Recent Advances in Catalytic Transfer Hydrogenation with Formic Acid over Heterogeneous Transition Metal Catalysts

Highly efficient catalytic transfer hydrogenation for the conversion of nitrobenzene to aniline over PdO/TiO2: The key role of in situ switching from PdO to Pd

The reduction of nitrobenzene to aniline is very important for both pollution control and chemical synthesis. Nevertheless, difficulties still remain in developing a catalytic system having high efficiency and selectivity for the production of aniline. Herein, it was found that PdO nanoparticles highly dispersed on TiO2 support (PdO/TiO2) functioned as a highly efficient catalyst for the reduction of nitrobenzene in the presence of NaBH4. Under favorable conditions, 95% of the added nitrobenzene (1 mmol/L) was reduced within 1 min with an ultra-low apparent activation energy of 10.8 kJ/mol by using 0.5%PdO/TiO2 as catalysts and 2 mmol/L of NaBH4 as reductants, and the selectivity to aniline even reached up to 98%. The active hydrogen species were perceived as dominant species during the hydrogenation of nitrobenzene by the results of isotope labeling experiments and ESR spectroscopic. A mechanism was proposed as follows: PdO activates the nitro groups and leads to in-situ generation of Pd, and the generated Pd acts as the reduction sites to produce active hydrogen species. In this catalytic system, nitrobenzene prefers to be adsorbed on the PdO nanoparticles of the PdO/TiO2 composite. Subsequently, the addition of NaBH4 results in in-situ generation of a Pd/PdO/TiO2 composite from the PdO/TiO2 composite, and the Pd nanoclusters would activate NaBH4 to generate active hydrogen species to attack the adsorbed nitro groups. This work will open up a new approach for the catalytic transfer hydrogenation of nitrobenzene to aniline in green chemistry.

Electrocatalytic Transfer Hydrogenation of 1-Octene with [(tBuPCP)Ir(H)(Cl)] and Water

Electrocatalytic hydrogenation of 1-octene as non-activated model substrate with neutral water as H-donor is reported, using [(tBuPCP)Ir(H)(Cl)] (1) as the catalyst, to form octane with high faradaic efficiency (FE) of 96 % and a kobs of 87 s-1. Cyclic voltammetry with 1 revealed that two subsequent reductions trigger the elimination of Cl- and afford the highly reactive anionic Ir(I) hydride complex [(tBuPCP)Ir(H)]- (2), a previously merely proposed intermediate for which we now report first experimental data by mass spectrometry. In absence of alkene, the stoichiometric electrolysis of 1 in THF with water selectively affords the Ir(III) dihydride complex [(tBuPCP)Ir(H)2] (3) in 88 % FE from the reaction of 2 with H2O. Complex 3 then hydrogenates the alkene in classical fashion. The presented electro-hydrogenation works with extremely high FE, because the iridium hydrides are water stable, which prevents H2 formation. Even in strongly alkaline conditions (Bu4NOH added), the electro-hydrogenation of 1-octene with 1 also proceeds cleanly (89 % FE), suggesting a highly robust process that may rely on H2O activation, reminiscent to transfer hydrogenation pathways, instead of classical H+ reduction. DFT calculations confirmed oxidative addition of H2O as a key step in this context.

Hydrogen-transfer strategy in lignin refinery: Towards sustainable and versatile value-added biochemicals

Lignin, the most prevalent natural source of polyphenols on Earth, offers substantial possibilities for the conversion into aromatic compounds, which is critical for attaining sustainability and carbon neutrality. The hydrogen-transfer method has garnered significant interest owing to its environmental compatibility and economic viability. The efficacy of this approach is contingent upon the careful selection of catalytic and hydrogen-donating systems that decisively affect the yield and selectivity of the monomeric products resulting from lignin degradation. This paper highlights the hydrogen-transfer technique in lignin refinery, with a specific focus on the influence of hydrogen donors on the depolymerization pathways of lignin. It delineates the correlation between the structure and activity of catalytic hydrogen-transfer arrangements and the gamut of lignin-derived biochemicals, utilizing data from lignin model compounds, separated lignin, and lignocellulosic biomass. Additionally, the paper delves into the advantages and future directions of employing the hydrogen-transfer approach for lignin conversion. In essence, this concept investigation illuminates the efficacy of the hydrogen-transfer paradigm in lignin valorization, offering key insights and strategic directives to maximize lignin's value sustainably.

Introducing Novel Redox-Active Bis(phenolate) N-Heterocyclic Carbene Proligands: Investigation of Their Coordination to Fe(II)/Fe(III) and Their Catalytic Activity in Transfer Hydrogenation of Carbonyl Compounds

A simple and efficient procedure for synthesizing novel pincer-type tridentate N-heterocyclic carbene bisphenolate ligands is reported. The synthesis of pincer proligands with N,N'-disubstituted imidazoline core, 5 and 6, was carried out via triethylorthoformate-promoted cyclization of either N,N'-bis(2-hydroxy-3,5-di-tert-butylphenyl)cyclohexanediamine, 3, or N,N'-bis(2-hydroxyphenyl)cyclohexanediamine, 4, in the presence of concentrated hydrochloric acid. Cyclic voltammograms of the ligands revealed ligand-centered redox activity, indicating the noninnocent nature of the ligands. The voltammograms of the ligands exhibit two successive one-electron oxidations and two consecutive one-electron reductions. In contrast to previous reports, the redox-active ligands in this study exhibit one-electron oxidation and reduction processes. All products were thoroughly characterized by using 1H and 13C NMR spectroscopy. The base-promoted deprotonation of the proligands and subsequent reaction with iron(II) and iron(III) chlorides yielded compounds 7 and 8. These compounds are binuclear and tetranuclear iron(III) complexes that do not contain carbene functional groups. Complexes 7 and 8 were characterized by using elemental analysis and single-crystal X-ray crystallography. At low catalyst loadings, both 7 and 8 exhibited high catalytic activity in the transfer hydrogenation of selected aldehydes and ketones.

A Solar to Chemical Strategy: Green Hydrogen as a Means, Not an End

Green hydrogen is the key to the chemical industry achieving net zero emissions. The chemical industry is responsible for almost 2% of all CO2 emissions, with half of it coming from the production of simple commodity chemicals, such as NH3, H2O2, methanol, and aniline. Despite electrolysis driven by renewable power sources emerging as the most promising way to supply all the green hydrogen required in the production chain of these chemicals, in this review, it is worth noting that the photocatalytic route may be underestimated and can hold a bright future for this topic. In fact, the production of H2 by photocatalysis still faces important challenges in terms of activity, engineering, and economic feasibility. However, photocatalytic systems can be tailored to directly convert sunlight and water (or other renewable proton sources) directly into chemicals, enabling a solar-to-chemical strategy. Here, a series of recent examples are presented, demonstrating that photocatalysis can be successfully employed to produce the most important commodity chemicals, especially on NH3, H2O2, and chemicals produced by reduction reactions. The replacement of fossil-derived H2 in the synthesis of these chemicals can be disruptive, essentially safeguarding the transition of the chemical industry to a low-carbon economy.

Construction of N-Aryl-Substituted Pyrrolidines by Successive Reductive Amination of Diketones via Transfer Hydrogenation

N-aryl-substituted pyrrolidines are important moieties widely found in bioactive substances and drugs. Herein, we present a practical reductive amination of diketones with anilines for the synthesis of N-aryl-substituted pyrrolidines in good to excellent yields. In this process, the N-aryl-substituted pyrrolidines were furnished via successive reductive amination of diketones via iridium-catalyzed transfer hydrogenation. The scale-up performance, water as a solvent, simple operation, as well as derivation of drug molecules showcased the potential application in organic synthesis.

5-Hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Biomass assumes an increasingly vital role in the realm of renewable energy and sustainable development due to its abundant availability, renewability, and minimal environmental impact. Within this context, 5-hydroxymethylfurfural (HMF), derived from sugar dehydration, stands out as a critical bio-derived product. It serves as a pivotal multifunctional platform compound, integral in synthesizing various vital chemicals, including furan-based polymers, fine chemicals, and biofuels. The high reactivity of HMF, attributed to its highly active aldehyde, hydroxyl, and furan ring, underscores the challenge of selectively regulating its conversion to obtain the desired products. This review highlights the research progress on efficient catalytic systems for HMF synthesis, oxidation, reduction, and etherification. Additionally, it outlines the techno-economic analysis (TEA) and prospective research directions for the production of furan-based chemicals. Despite significant progress in catalysis research, and certain process routes demonstrating substantial economics, with key indicators surpassing petroleum-based products, a gap persists between fundamental research and large-scale industrialization. This is due to the lack of comprehensive engineering research on bio-based chemicals, making the commercialization process a distant goal. These findings provide valuable insights for further development of this field.

Cobalt Phosphide-Supported Single-Atom Pt Catalysts for Efficient and Stable Hydrogen Generation from Ammonia Borane Hydrolysis

Ammonia borane (AB) has emerged as a promising chemical hydrogen storage material. The development of efficient, stable, and cost-effective catalysts for AB hydrolysis is the key to achieving hydrogen energy economy. Here, cobalt phosphide (CoP) is used to anchor single-atom Pt species, acting as robust catalysts for hydrogen generation from AB hydrolysis. Thanks to the high Pt utilization and the synergy between CoP and Pt species, the optimized Pt/CoP-100 catalyst exhibits an unprecedented hydrogen generation rate, giving a record turnover frequency (TOF) value of 39911mo l H 2 mo l Pt - 1 mi n - 1 ${\mathrm{mo}}{{{\mathrm{l}}}_{{{{\mathrm{H}}}_{\mathrm{2}}}}}{\mathrm{\ mo}}{{{\mathrm{l}}}_{{\mathrm{Pt}}}}^{{\mathrm{ - 1}}}{\mathrm{\ mi}}{{{\mathrm{n}}}^{{\mathrm{ - 1}}}}$ and turnover number of 2926829mo l H 2 mo l Pt - 1 ${\mathrm{mo}}{{{\mathrm{l}}}_{{{{\mathrm{H}}}_{\mathrm{2}}}}}{\mathrm{\ mo}}{{{\mathrm{l}}}_{{\mathrm{Pt}}}}^{{\mathrm{ - 1}}}$ at room temperature. These metrics surpass those of all existing state-of-the-art supported metal catalysts by an order of magnitude. Density functional theory calculations reveal that the integration of single-atom Pt onto the CoP substrate significantly enhances adsorption and dissociation processes for both water and AB molecules, thereby facilitating hydrogen production from AB hydrolysis. Interestingly, the TOF value is further elevated to 54878mo l H 2 mo l Pt - 1 mi n - 1 ${\mathrm{mo}}{{{\mathrm{l}}}_{{{{\mathrm{H}}}_{\mathrm{2}}}}}{\mathrm{\ mo}}{{{\mathrm{l}}}_{{\mathrm{Pt}}}}^{{\mathrm{ - 1}}}{\mathrm{\ mi}}{{{\mathrm{n}}}^{{\mathrm{ - 1}}}}$ under UV-vis light irradiation, which can be attributed to the efficient separation and mobility of photogenerated carriers at the Pt-CoP interface. The findings underscore the effectiveness of CoP as a support for single-atom metals in hydrogen production, offering insights for designing high-performance catalysts for chemical hydrogen storage.

Formoxyboranes as hydroborane surrogates for the catalytic reduction of carbonyls through transfer hydroboration

A new class of Lewis base stabilized formoxyboranes demonstrates the feasibility of catalytic transfer hydroboration. In the presence of a ruthenium catalyst, they have shown broad applicability for reducing carbonyl compounds. Various borylated alcohols are obtained in high selectivity and yields up to 99%, tolerating several functional groups. Computational studies enabled to propose a mechanism for this transformation, revealing the role of the ruthenium catalyst and the absence of hydroborane intermediates.

Facile Transfer Hydrogenation of N-Heteroarenes and Nitroarenes Using Magnetically Recoverable Pd@SPIONs Catalyst

Catalysts with active, selective, and reusable features are desirable for sustainable development. The present investigation involved the synthesis and characterization of bear-surfaced ultrasmall Pd particles (<1 nm) loaded onto the surface of magnetic nanoparticles (8-10 nm). The amount of Pd loading onto the surface of magnetite is recorded as 2.8 wt %. The characterization process covered the utilization of scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), inductively coupled plasma (ICP), and X-ray photoelectron spectroscopy (XPS) methods. The Pd@Fe3O4 catalyst has shown remarkable efficacy in the hydrogenation of quinoline, resulting in the production of >99% N-ring hydrogenated (py-THQ) product. Additionally, the catalyst facilitated the conversion of nitroarenes into their corresponding aniline derivatives, where hydrogen was achieved by H2O molecules with the aid of tetrahydroxydiboron (THDB) as an equilibrium supportive at 80 °C in 1 h. The high efficiency of a transfer hydrogenation catalyst is closely related to the metal-support synergistic effect. The broader scope of functional group tolerance is evaluated. The potential mechanism underlying the hydrogenation process has been elucidated through the utilization of isotopic labeling investigations. The application of the heterocyclic compound hydrogenation reaction is extended to formulate the medicinally important tubular polymerization inhibitor drug synthesis. The investigation of the recyclability of Pd@Fe3O4 has been conducted.

Selective hydrodeoxygenation of α, β-unsaturated carbonyl compounds to alkenes

Achieving selective hydrodeoxygenation of α, β-unsaturated carbonyl groups to alkenes poses a substantial challenge due to the presence of multiple functional groups. In this study, we develop a ZnNC-X catalyst (X represents the calcination temperature) that incorporates both Lewis acidic-basic sites and Zn-Nx sites to address this challenge. Among the catalyst variants, ZnNC-900 catalyst exhibits impressive selectivity for alkenes in the hydrodeoxygenation of α, β-unsaturated carbonyl compounds, achieving up to 94.8% selectivity. Through comprehensive mechanism investigations and catalyst characterization, we identify the Lewis acidic-basic sites as responsible for the selective hydrogenation of C=O bonds, while the Zn-Nx sites facilitate the subsequent selective hydrodeoxygenation step. Furthermore, ZnNC-900 catalyst displays broad applicability across a diverse range of unsaturated carbonyl compounds. These findings not only offer valuable insights into the design of effective catalysts for controlling alkene selectivity but also extend the scope of sustainable transformations in synthetic chemistry.

Interfacial nanoarchitectonics of nickel phosphide supported on activated carbon for transfer hydrogenation of nitroarenes under mild conditions

Metal phosphides are promising catalysts for hydrogenation reactions due to their unique ability to generate active hydrogen species which are essential for desired reactions. In this work, the hydrogenation potential of nickel phosphide (Ni2P) is explored for the transfer hydrogenation of aromatic nitro compounds using hydrazine hydrate as hydrogen source. The Ni2P was supported on activated carbon (AC) to facilitate highly exposed active reaction sites. The as-synthesized Ni2P-AC catalyst showed excellent catalytic potential for the hydrogenation of nitro compounds to corresponding amines with 100% conversion efficiency and resulted in excellent yields. The reaction conditions were optimized by varying different reaction parameters, such as time, temperature, solvents, catalyst amount and hydrogen sources. The developed reaction protocol is highly selective for nitro compounds having reduction susceptible functional groups like -Cl, -Br, -CHO, etc. The structure-activity relationship of the Ni2P-AC was also examined which suggested that both acidic and basic sites present in Ni2P-AC catalyst plays crucial role in hydrogenation reaction. Besides, an in-depth insight into the reaction mechanism illustrates that the reaction proceeds via N-phenyl hydroxylamine as the reaction intermediate. In addition, decent recyclability and stability of Ni2P-AC catalyst demonstrates its highly versatile nature for potential large-scale applications. The use of highly efficient Ni2P-AC catalyst for hydrogenation reactions can lead the way towards sustainable and effective industrial organic catalysis.

One-pot Construction of Metal Nanoparticles Loaded COF Catalysts for Aqueous Hydrogenation Reactions

The catalysis performance of metal nanoparticles (NPs) will be significantly deteriorated because of their spontaneous agglomeration during practical applications. Covalent-organic frameworks (COFs) materials with functional groups and well-defined channels benefit for the dispersion and anchor of metal ions and the confined growth of metal NPs, working as an ideal platform to compose catalytic systems. In this article, we report a one-pot strategy for the preparation of metal NPs loaded COFs without the need of post-modification. During the polymerization process, the pre-added metal ions were stabilized by the rapidly formed COF oligomers and hardly disturb the construction of COFs. After reduction, metal NPs are uniformly anchored on the COF matrix. Eventually, a wide spectrum of metal NPs, including Au, Pd, Pt, AuPd, CuPd, CuPt and CuPdPt, loaded COFs are successfully prepared. The versatility and metal ions anchoring mechanism are verified with four different COF matrixes. Taking AuPd NPs as example, the resultant AuPd NPs loaded COF materials can selectively decompose ammonium formate and produce hydrogen in-situ, exhibiting over 99 % conversion of hydrodechlorination for chlorobenzenes and nitro-reduction reaction for nitroaromatic compounds under ambient temperature in aqueous solution.

Lignin-functionalized cobalt for catalytic reductive degradation of organic dyes in simple and hybrid binary systems

To fulfill the unprecedented valorization approaches for lignocellulose, this work focuses on the potential of lignin-derived catalytic systems for bio-remediation, which are natural materials perceived to address the increased demand for eco-conscious catalyzed processes. A useful lignin-functionalized cobalt (Lig-Co) catalyst has been prepared, well-characterized and deployed for the catalyzed reducing decomposition of stable harmful organic pollutants such as methylene blue (MB) and methyl orange (MO), in simple and binary systems. The multifunctional character of lignin and the presence of various active sites can promote effectively loaded metal nanoparticles (NPs). Considerably, optimizing detoxification tests showed that the uncatalyzed use of NaBH4 as a reductive agent led to an incomplete reduction of organic contaminants over a long period of up to 65 min. Interestingly, Lig-Co catalyst exhibited a high reduction rate and turnover frequency of up to 99.23% and 24.12 min-1 for MB, respectively, while they reached 99.25% and 26.21 min-1 for MO at normal temperature. Kinetically quick catalytic reaction was also demonstrated for the hybrid system, in which the rate constant k was 0.175 s-1 and 0.165 s-1 for MB and MO, respectively, within a distinctly low reaction time of around 120 s. The reproducibility of the Lig-Co catalyst induces a desirable capacity to reduce stable dyes present simultaneously in the binary system, with 6 successive catalytic runs and over 80% of activity retained. Such robust findings underline the considerable interest in developing future lignin-mediated catalytic transformations and upscaling biomass-derived products, to meet the growing demand for sustainable and eco-friendly alternatives in various industries.

Recent progress of heterogeneous catalysts for transfer hydrogenation under the background of carbon neutrality

Under the background of carbon neutrality, the direct conversion of greenhouse CO2 to high value added fuels and chemicals is becoming an important and promising technology. Among them, the generation of liquid C1 products (formic acid and methanol) has made great progress; nevertheless, it encounters the problem of how to use it efficiently to solve the overcapacity issue. In this review, we suggest that the catalytic transfer hydrogenation using formic acid and methanol as the hydrogen sources is a critical and potential route for the substitution for the fossil fuel-derived H2 to generate essential bulk and fine chemicals. We mainly focus on summarizing the recent progress of heterogeneous catalysts in such reactions, including thermal- and photo-catalytic processes. Finally, we also propose some challenges and opportunities for this development.

Visualizing the Promoting Role of Interfacial Water in the Deprotonation of Formic Acid on Cu(111)

Water plays a crucial role in various heterogeneous catalytic reactions, but the atomic-scale characterization of how water participates in these chemical processes remains a significant challenge. Here we directly visualize the promoting role of interfacial water in the deprotonation of formic acid (FA) on a metal surface, using combined scanning tunneling microscopy and qPlus-based noncontact atomic force microscopy. We find the dissociation of FA when coadsorbed with water on the Cu(111) surface, resulting in the formation of hydronium and formate ions. Interestingly, most of the hydrated proton and formate ions exhibit a phase-separated behavior on Cu(111), in which Eigen and Zundel cations assemble into a monolayer hexagonal hydrogen-bonding (H-bonding) network, and bidentate formate ions are solvated with water and aggregate into one-dimensional chains or two-dimensional H-bonding networks. This phase-separated behavior is essential for preventing the proton transfer back from hydronium to formate and the reformation of FA. Density functional theory calculations reveal that the participation of water significantly reduces the deprotonation barrier of FA on Cu(111), in which water catalyzes the decomposition of FA through the Grotthuss proton transfer mechanism. In addition, the separate solvation of hydronium and bidentate formate ions is energetically preferred due to the enhanced interaction with the copper substrate. The promoting role of water in the deprotonation of FA is further confirmed by the temperature-programmed desorption experiment, which shows that the intensity of the H2 desorption peak significantly increases and the desorption of FA declines when water and FA coadsorbed on the Cu(111) surface.

Iodine-promoted transfer of dihydrogen from ketones to alkenes, triphenylmethyl, and diphenylmethyl derivatives

Herein, a novel class of transfer hydrogenation agent, cycloheptanone, was successfully employed in metal-free hydrogenation facilitated by iodine. A series of alkenes, triphenylmethyl derivatives, and diphenylmethyl derivatives were reduced to the desired compounds in moderate to excellent yields. The transfer hydrodeuteration of alkenes using α-deuterated cyclododecanone exhibited high regioselectivity. Preliminary mechanism studies confirmed the origins of the two hydrogen atoms involved in the reduction of alkenes. The current study paves the way for the use of ketones as unique transfer hydrogenation agents in chemical synthesis.

Homogenous nickel-catalyzed chemoselective transfer hydrogenation of functionalized nitroarenes with ammonia-borane

Homogeneous Ni-catalyzed highly selective transfer hydrogenation of nitroarenes was successfully established using NH3BH3 as a hydrogen source. A broad range of functional groups were selectively reduced to provide the corresponding anilines in good to high yields. Further, pharmaceutically active compounds can be prepared that would otherwise be challenging to access.

A scalable membrane electrode assembly architecture for efficient electrochemical conversion of CO2 to formic acid

The electrochemical reduction of carbon dioxide to formic acid is a promising pathway to improve CO2 utilization and has potential applications as a hydrogen storage medium. In this work, a zero-gap membrane electrode assembly architecture is developed for the direct electrochemical synthesis of formic acid from carbon dioxide. The key technological advancement is a perforated cation exchange membrane, which, when utilized in a forward bias bipolar membrane configuration, allows formic acid generated at the membrane interface to exit through the anode flow field at concentrations up to 0.25 M. Having no additional interlayer components between the anode and cathode this concept is positioned to leverage currently available materials and stack designs ubiquitous in fuel cell and H2 electrolysis, enabling a more rapid transition to scale and commercialization. The perforated cation exchange membrane configuration can achieve >75% Faradaic efficiency to formic acid at <2 V and 300 mA/cm2 in a 25 cm2 cell. More critically, a 55-hour stability test at 200 mA/cm2 shows stable Faradaic efficiency and cell voltage. Technoeconomic analysis is utilized to illustrate a path towards achieving cost parity with current formic acid production methods.

Atomically Dispersed Cobalt/Copper Dual-Metal Catalysts for Synergistically Boosting Hydrogen Generation from Formic Acid

The development of practical materials for (de)hydrogenation reactions is a prerequisite for the launch of a sustainable hydrogen economy. Herein, we present the design and construction of an atomically dispersed dual-metal site Co/Cu-N-C catalyst allowing significantly improved dehydrogenation of formic acid, which is available from carbon dioxide and green hydrogen. The active catalyst centers consist of specific CoCuN6 moieties with double-N-bridged adjacent metal-N4 clusters decorated on a nitrogen-doped carbon support. At optimal conditions the dehydrogenation performance of the nanostructured material (mass activity 77.7 L ⋅ gmetal -1  ⋅ h-1 ) is up to 40 times higher compared to commercial 5 % Pd/C. In situ spectroscopic and kinetic isotope effect experiments indicate that Co/Cu-N-C promoted formic acid dehydrogenation follows the so-called formate pathway with the C-H dissociation of HCOO* as the rate-determining step. Theoretical calculations reveal that Cu in the CoCuN6 moiety synergistically contributes to the adsorption of intermediate HCOO* and raises the d-band center of Co to favor HCOO* activation and thereby lower the reaction energy barrier.

Recent advances of Cp*Ir complexes for transfer hydrogenation: focus on formic acid/formate as hydrogen donors

Transfer hydrogenation reactions offer synthetically powerful strategies to deliver various hydrogenated compounds with the advantages of efficiency, atom economy, and practicability. On one hand, formic acid/formate function as promising hydrogen sources owing to their readily obtainable, inexpensive, and easy to handle nature. On the other hand, Cp*Ir complexes show high activities in transfer hydrogenation. This review highlights progress achieved for transfer hydrogenation of CO, CC, and CN bonds of a variety of unsaturated substrates, as well as amides focusing on Cp*Ir complexes as catalysts and formic acid/formate as hydrogen sources.

Streamlining the synthesis of amides using Nickel-based nanocatalysts

The synthesis of amides is a key technology for the preparation of fine and bulk chemicals in industry, as well as the manufacture of a plethora of daily life products. Furthermore, it constitutes a central bond-forming methodology for organic synthesis and provides the basis for the preparation of numerous biomolecules. Here, we present a robust methodology for amide synthesis compared to traditional amidation reactions: the reductive amidation of esters with nitro compounds under additives-free conditions. In the presence of a specific heterogeneous nickel-based catalyst a wide range of amides bearing different functional groups can be selectively prepared in a more step-economy way compared to previous syntheses. The potential value of this protocol is highlighted by the synthesis of drugs, as well as late-stage modifications of bioactive compounds. Based on control experiments, material characterizations, and DFT computations, we suggest metallic nickel and low-valent Ti-species to be crucial factors that makes this direct amide synthesis possible.

Efficient and Selective Oxygenation of Cycloalkanes and Alkyl Aromatics with Oxygen through Synergistic Catalysis of Bimetallic Active Centers in Two-Dimensional Metal-Organic Frameworks Based on Metalloporphyrins

Confined catalytic realms and synergistic catalysis sites were constructed using bimetallic active centers in two-dimensional metal-organic frameworks (MOFs) to achieve highly selective oxygenation of cycloalkanes and alkyl aromatics with oxygen towards partly oxygenated products. Every necessary characterization was carried out for all the two-dimensional MOFs. The selective oxygenation of cycloalkanes and alkyl aromatics with oxygen was accomplished with exceptional catalytic performance using two-dimensional MOF Co-TCPPNi as a catalyst. Employing Co-TCPPNi as a catalyst, both the conversion and selectivity were improved for all the hydrocarbons investigated. Less disordered autoxidation at mild conditions, inhibited free-radical diffusion by confined catalytic realms, and synergistic C-H bond oxygenation catalyzed by second metal center Ni employing oxygenation intermediate R-OOH as oxidant were the factors for the satisfying result of Co-TCPPNi as a catalyst. When homogeneous metalloporphyrin T(4-COOCH3)PPCo was replaced by Co-TCPPNi, the conversion in cyclohexane oxygenation was enhanced from 4.4% to 5.6%, and the selectivity of partly oxygenated products increased from 85.4% to 92.9%. The synergistic catalytic mechanisms were studied using EPR research, and a catalysis model was obtained for the oxygenation of C-H bonds with O2. This research offered a novel and essential reference for both the efficient and selective oxygenation of C-H bonds and other key chemical reactions involving free radicals.

Chemoselective Reduction of α,β-Unsaturated Carbonyl Compounds via a CS2/t-BuOK System: Dimethyl Sulfoxide as a Hydrogen Source

A novel and practical approach to access saturated ketones from unsaturated ketone derivatives via a CS₂/t-BuOK system in dimethyl sulfoxide (DMSO) is reported. The in situ generation of xanthate salt through the reaction of carbon disulfide and potassium tert-butoxide is essential to this transformation. Deuterium-labeling experiments demonstrated that DMSO can act as a hydrogen donor.

Intramolecular Proton-Coupled Hydride Transfers with Relatively Low Activation Barriers

We report that bifunctional molecules containing hydroxyl and carbonyl functional groups can undergo an effective transfer hydrogenation via an intramolecular proton-coupled hydride transfer (PCHT) mechanism. In this reaction mechanism, a hydride transfer between two carbon atoms is coupled with a proton transfer between two oxygen atoms via a cyclic bond rearrangement transition structure. The coupled transfer of the two hydrogens as H^δ+ and H^δ- is supported by atomic polar tensor charges. The activation energy for the PCHT reaction is strongly dependent on the length of the alkyl chain between the hydroxyl and carbonyl functional groups but relatively weakly dependent on the functional groups attached to the hydroxyl and carbonyl carbons. We investigate the PCHT reaction mechanism using the Gaussian-4 thermochemical protocol and obtain high activation energy barriers (ΔH^‡₂₉₈) of 210.5-228.3 kJ mol^-1 for chain lengths of one carbon atom and 160.2-163.9 kJ mol^-1 for chain lengths of two carbon atoms. However, for longer chain lengths containing 3-4 carbon atoms, we obtain ΔH^‡₂₉₈ values as low as 101.9 kJ mol^-1. Importantly, the hydride transfer between two carbon atoms proceeds without the need for a catalyst or hydride transfer activating agent. These results indicate that the intramolecular PCHT reaction provides an effective avenue for uncatalyzed, metal-free hydride transfers at ambient temperatures.

Ni-catalyzed mild hydrogenolysis and oxidations of C-O bonds via carbonate redox tags

Oxygenated molecules are omnipresent in natural as well as artificial settings making the redox transformation of the present C-O bonds a central tool for their processing. However, the required (super)stoichiometric redox agents which traditionally include highly reactive and hazardous reagents pose multiple practical challenges including process safety hazards or special waste management requirements. Here, we report a mild Ni-catalyzed fragmentation strategy based on carbonate redox tags for redox transformations of oxygenated hydrocarbons in the absence of any external redox equivalents or other additives. The purely catalytic process enables the hydrogenolysis of strong C(sp²)-O bonds including that of enol carbonates as well as the catalytic oxidation of C-O bonds under mild conditions down to room temperature. Additionally, we investigated the underlying mechanism and showcased the benefits of carbonate redox tags in multiple applications. More broadly, the work herein demonstrates the potential of redox tags for organic synthesis.

Synergistic Combination of Fermi Level Equilibrium and Plasmonic Effect for Formic Acid Dehydrogenation

Developing an efficient catalyst for formic acid (FA) dehydrogenation is a promising strategy for safe hydrogen storage and transportation. Herein, we successfully developed trimetallic NiAuPd heterogeneous catalysts through a galvanic replacement reaction and a subsequent chemical reduction process to boost hydrogen generation from FA decomposition at room temperature by coupling Fermi level engineering with plasmonic effect. We demonstrated that Ni worked as an electron reservoir to donate electrons to Au and Pd driven by Fermi level equilibrium whereas plasmonic Au served as an optical absorber to generate energetic hot electrons and a charge-redistribution mediator. Ni and Au worked cooperatively to promote the charge heterogeneity of surface-active Pd sites, leading to enhanced chemisorption of formate-related intermediates and eventually outstanding activity (342 mmol g^-1  h^-1 ) compared with bimetallic counterpart. This work offers excellent insight into the rational design of efficient catalysts for practical hydrogen energy exploitation.

Methanol as a Potential Hydrogen Source for Reduction Reactions Enabled by a Commercial Pt/C Catalyst

Catalytic reduction reactions using methanol as a transfer hydrogenating agent is gaining significant attention because this simple alcohol is inexpensive and produced on a bulk scale. Herein, we report the catalytic utilization of methanol as a hydrogen source for the reduction of different functional organic compounds such as nitroarenes, olefins, and carbonyl compounds. The key to the success of this transformation is the use of a commercially available Pt/C catalyst, which enabled the transfer hydrogenation of a series of simple and functionalized nitroarenes-to-anilines, alkenes-to-alkanes, and aldehydes-to-alcohols using methanol as both the solvent and hydrogen donor. The practicability of this Pt-based protocol is showcased by demonstrating catalyst recycling and reusability as well as reaction upscaling. In addition, the Pt/C catalytic system was also adaptable for the N-methylation and N-alkylation of anilines via the borrowing hydrogen process. This work provides a simple and flexible approach to prepare a variety of value-added products from readily available methanol, Pt/C, and other starting materials.

Pincer Platinum(II) Hydrides: High Stability Imparted by Donor-Flexible Pyridylidene Amide Ligands and Evidence for Adduct Formation before Protonation

Donor-flexible ligands are an emerging class of noninnocent ligands. Their ability to adapt their donating strength toward a metal center has had numerous catalytic advantages yet has never been utilized to stabilize and isolate intermediate complexes within these processes. We demonstrate through the use of a pincer ligand containing two donor-flexible pyridylidene amide (PYA) arms in coordination with platinum(II) that this ligand adaptability revealed remarkably stable hydride and formate complexes. These are typically fleeting catalytic intermediates within formic acid dehydrogenation and CO₂ hydrogenation catalytic cycles. The PYA platinum hydride complexes are indefinitely stable in air, while formate complexes show no sign of β-hydrogen elimination. This robustness allowed us to investigate hydride protonation as a seemingly simple reaction, though in-depth kinetic analysis reveals a pre-equilibrium step prior to platinum hydride protonation. This initial step has been attributed to adduct formation and is slower than the protonation, and therefore a relevant aspect when designing catalytic cycles for hydrogen release and its microscopic reverse, viz., hydrogen uptake.

Nitrogen and Phosphorus Dual-Coordinated Single-Atom Mn: MnN2P Active Sites for Catalytic Transfer Hydrogenation of Nitroarenes

The coordination environment of atomically metal sites can modulate the electronic states and geometric structure of single-atom catalysts, which determine their catalytic performance. In this work, the porous carbon-supported N, P dual-coordinated Mn single-atom catalyst was successfully prepared via the phosphatization of zeolitic imidazolate frameworks and followed by pyrolysis at 900 °C. The optimal Mn₁-N/P-C catalyst with atomic MnN₂P structure has displayed better catalytic activity than the related catalyst with Mn-N_x structure in catalytic transfer hydrogenation of nitroarenes using formic acid as the hydrogen donor. We find that the doping of P source plays a crucial role in improving the catalytic performance, which affects the morphology and electronic properties of catalyst. This is the first Mn heterogeneous catalyst example for the reduction of nitroarenes, and it also revealed that the MnN₂P configuration is a more promising alternative in heterogeneous catalysis.

Controlled synthesis of Ru-single-atoms on ordered mesoporous phosphine polymers for microwave-assisted conversion of biomass-derived sugars to artificial sweeteners

Atomically dispersed metal-single-atoms have become a frontier in solid catalysis due to their characteristic electronic properties. However, for biomass conversion, employing metal-single-atoms as catalysts is rather challenging since they suffer from poor selectivity and yield due to inadequate metal-support interactions. We show here that Ru/triphenylphosphine (PPh)-based ordered mesoporous polymers afford high yields of reduced sugars, xylitol (yield ∼95%) and sorbitol (yield ∼65%) in a microwave reactor with formic acid as the only hydrogen donor. We have established a unique relationship within Ru/triphenylphosphine that shows an important ligand effect, in contrast to, Ru/triphenylamine and Ru/catechol. The tailored electronic properties in Ru/phosphine were thoroughly examined by using state-of-the-art experimental techniques viz. EXAFS, XANES, XPS, DRIFTS and HAADF-STEM. The resulting phosphine-modified catalysts show a promotion in activity and selectivity towards less vulnerable aldehydes for hydrogenation, further confirmed by DFT calculations. This finding reveals a new protocol to tailor the activity of metal-single-atoms utilizing functional porous polymers as nanoreactors.

Micro/mesoporous LTL derived materials for catalytic transfer hydrogenation and acid reactions of bio-based levulinic acid and furanics

The biomass-derived platform chemicals furfural and 5-(hydroxymethyl)furfural (HMF) may be converted to α-angelica lactone (AnL) and levulinic acid (LA). Presently, LA (synthesized from carbohydrates) has several multinational market players. Attractive biobased oxygenated fuel additives, solvents, etc., may be produced from AnL and LA via acid and reduction chemistry, namely alkyl levulinates and γ-valerolactone (GVL). In this work, hierarchical hafnium-containing multifunctional Linde type L (LTL) related zeotypes were prepared via top-down strategies, for the chemical valorization of LA, AnL and HMF via integrated catalytic transfer hydrogenation (CTH) and acid reactions in alcohol medium. This is the first report of CTH applications (in general) of LTL related materials. The influence of the post-synthesis treatments/conditions (desilication, dealumination, solid-state impregnation of Hf or Zr) on the material properties and catalytic performances was studied. AnL and LA were converted to 2-butyl levulinate (2BL) and GVL in high total yields of up to ca. 100%, at 200°C, and GVL/2BL molar ratios up to 10. HMF conversion gave mainly the furanic ethers 5-(sec-butoxymethyl)furfural and 2,5-bis(sec-butoxymethyl)furan (up to 63% total yield, in 2-butanol at 200°C/24 h). Mechanistic, reaction kinetics and material characterization studies indicated that the catalytic results depend on a complex interplay of different factors (material properties, type of substrate). The recovered-reused solids performed steadily.

Catalytic Transfer Hydrogenation of 5-Hydroxymethylfurfural with Primary Alcohols over Skeletal CuZnAl Catalysts

Catalytic transfer hydrogenation (CTH) with alcohols has been increasingly employed as effective tool for biomass upgrading, however, relying predominantly on secondary alcohols. Herein, for the first time skeletal CuZnAl catalysts were employed for the activation of a primary alcohol, ethanol, for the hydrogenation 5-hydroxymethylfurfual (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF) under a mild condition. The catalysts were extensively characterized to reveal the structure characteristics and surface compositions. Over 90 % yield of BHMF were obtained over the optimal CuZnAl-0.5 catalyst at the reaction temperatures of 100-120 °C. Reaction kinetics indicated a competitive adsorption between HMF and ethanol on the catalyst surface, with the activation of ethanol being the rate-determining step (apparent activation energy E_a =70.9 kJ mol^-1 ). Preliminary adsorption investigation using combined attenuated total reflectance infrared spectroscopy and density functional theory calculation proposed a η² -(O,O)-aldehyde, furoxy perpendicular configuration of HMF on catalyst surface. The catalyst was further applied to the CTH of various aldehydes to the corresponding alcohols with high yields, demonstrating the broad applicability of the current system.

Evolution of the Dearomative Functionalization of Activated Quinolines and Isoquinolines: Expansion of the Electrophile Scope

Herein we disclose a mild protocol for the reductive functionalisation of quinolinium and isoquinolinium salts. The reaction proceeds under transition-metal-free conditions as well as under rhodium catalysis with very low catalyst loadings (0.01 mol %) and uses inexpensive formic acid as the terminal reductant. A wide range of electrophiles, including enones, imides, unsaturated esters and sulfones, β-nitro styrenes and aldehydes are intercepted by the in situ formed enamine species forming a large variety of substituted tetrahydro(iso)quinolines. Electrophiles are incorporated at the C-3 and C-4 position for quinolines and isoquinolines respectively, providing access to substitution patterns which are not favoured in electrophilic or nucleophilic aromatic substitution. Finally, this reactivity was exploited to facilitate three types of annulation reactions, giving rise to complex polycyclic products of a formal [3+3] or [4+2] cycloaddition.

Evolution of the Dearomative Functionalization of Activated Quinolines and Isoquinolines: Expansion of the Electrophile Scope

Herein we disclose a mild protocol for the reductive functionalisation of quinolinium and isoquinolinium salts. The reaction proceeds under transition-metal-free conditions as well as under rhodium catalysis with very low catalyst loadings (0.01 mol %) and uses inexpensive formic acid as the terminal reductant. A wide range of electrophiles, including enones, imides, unsaturated esters and sulfones, β-nitro styrenes and aldehydes are intercepted by the in situ formed enamine species forming a large variety of substituted tetrahydro(iso)quinolines. Electrophiles are incorporated at the C-3 and C-4 position for quinolines and isoquinolines respectively, providing access to substitution patterns which are not favoured in electrophilic or nucleophilic aromatic substitution. Finally, this reactivity was exploited to facilitate three types of annulation reactions, giving rise to complex polycyclic products of a formal [3+3] or [4+2] cycloaddition.

Cu2O nanoparticle-catalyzed tandem reactions for the synthesis of robust polybenzoxazole

We report the synthesis of Cu₂O nanoparticles (NPs) by controlled oxidation of Cu NPs and the study of these NPs as a robust catalyst for ammonia borane dehydrogenation, nitroarene hydrogenation, and amine/aldehyde condensation into Schiff-base compounds. Upon investigation of the size-dependent catalysis for ammonia borane dehydrogenation and nitroarene hydrogenation using 8-18 nm Cu₂O NPs, we found 13 nm Cu₂O NPs to be especially active with quantitative conversion of nitro groups to amines. The 13 nm Cu₂O NPs also efficiently catalyze tandem reactions of ammonia borane, diisopropoxy-dinitrobenzene, and terephthalaldehyde, leading to a controlled polymerization and the facile synthesis of polybenzoxazole (PBO). The highly pure PBO (M_w = 19 kDa) shows much enhanced chemical stability than the commercial PBO against hydrolysis in boiling water or simulated seawater, demonstrating a great potential of using noble metal-free catalysts for green chemistry synthesis of PBO as a robust lightweight structural material for thermally and mechanically demanding applications.

Efficient Reduction of Cr (VI) to Cr (III) over a TiO2-Supported Palladium Catalyst Using Formic Acid as a Reductant

Cr (VI) has been considered to be a harmful environmental pollutant due to its toxicity, mobility and strong oxidation. It has become challenging to remove Cr (VI) from wastewater. In this work, a series of supported palladium-based catalysts were synthesized via a facile wet chemical reduction method. Among all the as-synthesized catalysts, Pd/TiO2 (P25) showed the optimized catalytic activity for the reduction of Cr (VI) to Cr (III) using formic acid (HCOOH) as the reductant. More than 99% of K2Cr2O7 (50 mg/L) was reduced completely within 30 min at 25 °C. The structural properties of the Pd/TiO2 catalyst (such as particle size, hydrophilicity and stability) and the synergistic effect of metal and support played significant roles in the reduction of Cr (VI) to Cr (III). Meanwhile, several pivotal parameters such as Cr (VI) concentration, catalyst loading, HCOOH concentration and temperature were investigated in detail. Furthermore, this catalyst was also active for the reduction of nitro compounds with HCOOH as the reductant at room temperature. Finally, the reasonable reaction mechanism of the Pd/TiO2/HCOOH system for the reduction of Cr (VI) to Cr (III) was put forward.

Hydrogenolysis of Glycerol to Propylene Glycol: Energy, Tech-Economic, and Environmental Studies

Hydrogenolysis of glycerol to propylene glycol represents one of the most promising technologies for biomass conversion to chemicals. However, conventional hydrogenolysis processes are often carried out under harsh H₂ pressures and temperatures, leading to intensive energy demands, fast catalyst deactivation, and potential safety risks during H₂ handling. Catalytic transfer hydrogenolysis (CTH) displays high energy and atom efficiency. We have studied a series novel solid catalysts for CTH of glycerol. In this work, detailed studies have been conducted on energy optimization, tech-economic analysis, and environmental impact for both processes. The key finding is that relatively less energy demands and capital investment are required for CTH process. CO₂ emission per production of propylene glycol is much lower in the case of transfer hydrogenolysis. The outcome of this study could provide useful information for process design and implementation of novel hydrogenolysis technologies for other energy and environmental applications.

Hydrogenation of furfural to furfuryl alcohol over MOF-derived Fe/Cu@C and Fe3O4/Cu@C catalysts

With Cu-MOF-loaded Fe(NO3)3 as the precursor (Fe(NO3)3/Cu-MOF), Fe/Cu@C and Fe3O4/Cu@C catalysts were prepared from heating under the H2 and N2 atmosphere, respectively. When Fe(NO3)3/Cu-MOF was heated under different atmospheres, Cu-MOF...

μ-Oxo-bridged iron(iii) complexes for the selective reduction of aromatic ketones catalyzed through base promoted in situ nanoparticle formation

Selective TH of aromatic ketones catalyzed by μ-oxo-diiron complexes and in situ NP formation in the presence of a base gave excellent yields (∼99–100%).