Origin of the Activity of Co–N–C Catalysts for Chemoselective Hydrogenation of Nitroarenes

Highly efficient selective hydrogenation of adiponitrile to hexamethylene diamine over barium and melamine formaldehyde resin-modified nickel-cobalt-based zeolitic imidazolate framework-derived catalyst

In the present study, the catalyst modified with alkaline oxide can enhance the selectivity to primary amines. However, the addition of alkaline oxide inevitably reduces catalytic activity. In this study, NiCo-NC@BaO-MFC catalyst derived from zeolitic imidazolate framework-67, Ba(CH3COO)2, and melamine formaldehyde (MF) resin was prepared and used for the hydrogenation of adiponitrile (ADN) to hexamethylene diamine (HDMA). The carbon layer obtained from the MF resin effectively prevents the interaction between barium (Ba) and the active center, thus improving target product selectivity without decreasing catalytic activity. The results of the density functional theory (DFT) calculation and characterization indicated that the effect of synergy between nickel (Ni) and cobalt (Co) bimetals induces an electron density growth on the Ni surface, bringing the d-band center toward the Fermi surface. Meanwhile, the high electron density of the active center compensates for the electron-deficient state of the carbon atom in -CN, thus improving the catalytic activity. Furthermore, it was found that the introduction of Ba promotes the formation of nucleophilic hydrogen anions, which facilitates the hydrogenation of 6-aminohexylimine (AHIM) to HDMA and inhibits the intramolecular condensation of AHIM, hence improving the selectivity to HDMA. The NiCo-NC@BaO-MFC catalyst gives 98.6 % ADN conversion and 97.2 % selectivity to HDMA in an alkali-free system.

Fully exposed Pt clusters for efficient catalysis of multi-step hydrogenation reactions

For di-nitroaromatics hydrogenation, it is a challenge to achieve the multi-step hydrogenation with high activity and selectivity due to the complexity of the process involving two nitro groups. Consequently, many precious metal catalysts suffer from low activity for this multi-step hydrogenation reaction. Herein, we employ a fully exposed Pt clusters catalyst consisting of an average of four Pt atoms on nanodiamond@graphene (Ptn/ND@G), demonstrating excellent catalytic performance for the multi-step hydrogenation of 2,4-dinitrotoluene. The TOF (40647 h-1) of Ptn/ND@G is significantly superior to that of single Pt atoms catalyst, Pt nanoparticles catalyst, and even all the known catalysts. Density functional theory calculations and absorption experiments reveal that the synergetic interaction between the multiple active sites of Ptn/ND@G facilitate the co-adsorption/activation of reactants and H2, as well as the desorption of intermediates/products, which is the key for the higher catalytic activity than single Pt atoms catalyst and Pt nanoparticles catalyst.

Aerobic Oxidative Carboxylation of Styrene Over Cobalt Catalysts: Integrated CO2 Capture and Conversion

The direct synthesis of cyclic carbonates through oxidative carboxylation of alkenes using CO2 and O2 offers a sustainable and carbon-neutral method for CO2 utilization, which is, however, still a largely unexplored field. Here we develop a single-atom catalyst (SAC) Co-N/O-C as the earth-abundant metal catalyst for the oxidative carboxylation of styrene with CO2 and O2. Remarkably, even using the flue gas as an impure CO2 and O2 source, desired cyclic carbonate could be obtained with moderate productivity, which shows the potential for integrated CO2 capture and conversion, leveraging the high CO2 adsorption capacity of Co-N/O-C. In addition, the catalyst can be reused five times without an obvious decline in activity. Detailed characterizations and theoretical calculations elucidate the crucial role of single Co atoms in activating O2 and CO2, as well as controlling selectivity.

Multicomponent Reductive Coupling for Selective Access to Functional γ-Lactams by a Single-Atom Cobalt Catalyst

Despite their significant importance to numerous fields, the difficulties in direct and diverse synthesis of α-hydroxy-γ-lactams pose substantial obstacles to their practical applications. Here, we designed a nitrogen and TiO2 co-doped graphitic carbon-supported material with atomically dispersed cobalt sites (CoSA-N/NC-TiO2), which was successfully applied as a multifunctional catalyst to establish a general method for direct construction of α-hydroxy-γ-lactams from cheap and abundant nitro(hetero)arenes, aldehydes, and H2O with alkynoates. The striking features of operational simplicity, broad substrate and functionality compatibility (>100 examples), high step and atom efficiency, good selectivity, and exceptional catalyst reusability highlight the practicality of this new catalytic transformation. Mechanistic studies reveal that the active CoN4 species and the dopants exhibit a synergistic effect on the formation of key acid-masked nitrones; their subsequent nucleophilic addition to the alkynoates followed by successive reduction, alkenyl hydration, and intramolecular ester ammonolysis delivers the desired products. In this work, the concept of reduction interruption leading to new reaction route will open a door to further develop useful transformations by rational catalyst design.

Interfacial nanoarchitectonics of nickel phosphide supported on activated carbon for transfer hydrogenation of nitroarenes under mild conditions

Metal phosphides are promising catalysts for hydrogenation reactions due to their unique ability to generate active hydrogen species which are essential for desired reactions. In this work, the hydrogenation potential of nickel phosphide (Ni2P) is explored for the transfer hydrogenation of aromatic nitro compounds using hydrazine hydrate as hydrogen source. The Ni2P was supported on activated carbon (AC) to facilitate highly exposed active reaction sites. The as-synthesized Ni2P-AC catalyst showed excellent catalytic potential for the hydrogenation of nitro compounds to corresponding amines with 100% conversion efficiency and resulted in excellent yields. The reaction conditions were optimized by varying different reaction parameters, such as time, temperature, solvents, catalyst amount and hydrogen sources. The developed reaction protocol is highly selective for nitro compounds having reduction susceptible functional groups like -Cl, -Br, -CHO, etc. The structure-activity relationship of the Ni2P-AC was also examined which suggested that both acidic and basic sites present in Ni2P-AC catalyst plays crucial role in hydrogenation reaction. Besides, an in-depth insight into the reaction mechanism illustrates that the reaction proceeds via N-phenyl hydroxylamine as the reaction intermediate. In addition, decent recyclability and stability of Ni2P-AC catalyst demonstrates its highly versatile nature for potential large-scale applications. The use of highly efficient Ni2P-AC catalyst for hydrogenation reactions can lead the way towards sustainable and effective industrial organic catalysis.

Iron-Based Catalysts with Oxygen Vacancies Obtained by Facile Pyrolysis for Selective Hydrogenation of Nitrobenzene

The development of preparation strategies for iron-based catalysts with prominent catalytic activity, stability, and cost effectiveness is greatly significant for the field of catalytic hydrogenation but still remains challenging. Herein, a method for the preparation of iron-based catalysts by the simple pyrolysis of organometallic coordination polymers is described. The catalyst Fe@C-2 with sufficient oxygen vacancies obtained in specific coordination environment exhibited superior nitro hydrogenation performance, acid resistance, and reaction stability. Through solvent effect experiments, toxicity experiments, TPSR, and DFT calculations, it was determined that the superior activity of the catalyst was derived from the contribution of sufficient oxygen vacancies to hydrogen activation and the good adsorption ability of FeO on substrate molecules.

Visible-Light-Driven Selective Hydrogenation of Nitrostyrene over Layered Ternary Sulfide Nanostructures

Selective hydrogenation of nitrostyrenes is a great challenge due to the competitive activation of the nitro groups (─NO2 ) and carbon-carbon (C═C) double bonds. Photocatalysis has emerged as an alternative to thermocatalysis for the selective hydrogenation reaction, bypassing the precious metal costs and harsh conditions. Herein, two crystalline phases of layered ternary sulfide Cu2 WS4 , that is, body-centered tetragonal I-Cu2 WS4 nanosheets and primitive tetragonal P-Cu2 WS4 nanoflowers, are controlled synthesized by adjusting the capping agents. Remarkably, these nanostructures show visible-light-driven photocatalytic performance for selective hydrogenation of 3-nitrostyrene under mild conditions. In detail, the I-Cu2 WS4 nanosheets show excellent conversion of 3-nitrostyrene (99.9%) and high selectivity for 3-vinylaniline (98.7%) with the assistance of Na2 S as a hole scavenger. They also can achieve good hydrogenation selectivity to 3-ethylnitrobenzene (88.5%) with conversion as high as 96.3% by using N2 H4 as a proton source. Mechanism studies reveal that the photogenerated electrons and in situ generated protons from water participate in the former hydrogenation pathway, while the latter requires the photogenerated holes and in situ generated reactive oxygen species to activate the N2 H4 to form cis-N2 H2 for further reduction. The present work expands the rational synthesis of ternary sulfide nanostructures and their potential application for solar-energy-driven organic transformations.

Mesoporous α-Al2O3-supported PdCu bimetallic nanoparticle catalyst for the selective semi-hydrogenation of alkynes

The selective hydrogenation of alkynes to alkenes is widely applied in the chemical industry; nevertheless, achieving highly selective hydrogenation with high catalytic activity is considerably challenging. Herein, ultrafine PdCu bimetallic nanoparticles encapsulated by high-surface-area mesoporous α-Al2O3 were prepared by high-temperature calcination-reduction using a porous organic framework (POF) as the template. As-obtained PdCu@α-Al2O3 exhibited a high selectivity of 95% for the semi-hydrogenation of phenylacetylene as a probe reaction under mild reaction conditions. The separation of continuous Pd atoms and modification of the Pd electronic state by Cu atoms suppressed β-hydride formation and alkene adsorption, contributing to high selectivity for the catalytic hydrogenation of alkynes. The catalytic activity was maintained after 7 cycles due to the strong interaction between the PdCu bimetallic nanoparticles and α-Al2O3 as well as the encapsulation effect of mesoporous α-Al2O3. Thus, the current work provides a facile strategy for fabricating high-surface-area mesoporous α-Al2O3-supported catalysts for industrial catalysis applications.

Ionothermal synthesis of magnetic N-doped porous carbon to immobilize Pd nanoparticles as an efficient nanocatalyst for the reduction of nitroaromatic compounds

Carbon materials play important roles as catalysts or catalyst supports for reduction reactions owing to their high porosity, large specific surface area, great electron conductivity, and excellent chemical stability. In this paper, a mesoporous N-doped carbon substrate (exhibited as N-C) has been synthesized by ionothermal carbonization of glucose in the presence of histidine. The N-C substrate was modified by Fe3O4 nanoparticles (N-C/Fe3O4), and then Pd nanoparticles were stabilized on the magnetic substrate to synthesize an eco-friendly Pd catalyst with high efficiency, magnetic, reusability, recoverability, and great stability. To characterize the Pd/Fe3O4-N-C nanocatalyst, different microscopic and spectroscopic methods such as FT-IR, XRD, SEM/EDX, and TEM were applied. Moreover, Pd/Fe3O4-N-C showed high catalytic activity in reducing nitroaromatic compounds in water at ambient temperatures when NaBH4 was used as a reducing agent. The provided nanocatalyst's great catalytic durability and power can be attributed to the synergetic interaction among well-dispersed Pd nanoparticles and N-doped carbonaceous support.

Modulating Electronic Structures of Iron Clusters through Orbital Rehybridization by Adjacent Single Copper Sites for Efficient Oxygen Reduction

The atom-cluster interaction has recently been exploited as an effective way to increase the performance of metal-nitrogen-carbon catalysts for oxygen reduction reaction (ORR). However, the rational design of such catalysts and understanding their structure-property correlations remain a great challenge. Herein, we demonstrate that the introduction of adjacent metal (M)-N4 single atoms (SAs) could significantly improve the ORR performance of a well-screened Fe atomic cluster (AC) catalyst by combining density functional theory (DFT) calculations and experimental analysis. The DFT studies suggest that the Cu-N4 SAs act as a modulator to assist the O2 adsorption and cleavage of O-O bond on the Fe AC active center, as well as optimize the release of OH* intermediates to accelerate the whole ORR kinetic. The depositing of Fe AC with Cu-N4 SAs on nitrogen doped mesoporous carbon nanosheet are then constructed through a universal interfacial monomicelles assembly strategy. Consistent with theoretical predictions, the resultant catalyst exhibits an outstanding ORR performance with a half-wave potential of 0.92 eV in alkali and 0.80 eV in acid, as well as a high power density of 214.8 mW cm-2 in zinc air battery. This work provides a novel strategy for precisely tuning the atomically dispersed poly-metallic centers for electrocatalysis.

New Insights into N-Doped Porous Carbons as Both Heterogeneous Catalysts and Catalyst Supports: Opportunities for the Catalytic Synthesis of Valuable Compounds

Among the vast class of porous carbon materials, N-doped porous carbons have emerged as promising materials in catalysis due to their unique properties. The introduction of nitrogen into the carbonaceous matrix can lead to the creation of new sites on the carbon surface, often associated with pyridinic or pyrrolic nitrogen functionalities, which can facilitate various catalytic reactions with increased selectivity. Furthermore, the presence of N dopants exerts a significant influence on the properties of the supported metal or metal oxide nanoparticles, including the metal dispersion, interactions between the metal and support, and stability of the metal nanoparticles. These effects play a crucial role in enhancing the catalytic performance of the N-doped carbon-supported catalysts. Thus, N-doped carbons and metals supported on N-doped carbons have been revealed to be interesting heterogeneous catalysts for relevant synthesis processes of valuable compounds. This review presents a concise overview of various methods employed to produce N-doped porous carbons with distinct structures, starting from diverse precursors, and showcases their potential in various catalytic processes, particularly in fine chemical synthesis.

Reusable Cobalt-Catalyzed Selective Transfer Hydrogenation of Azoarenes and Nitroarenes

Herein, control transfer hydrogenation (TH) of azoarenes to hydrazo compounds is established employing easy-to-synthesize reusable cobalt catalyst using lower amounts of N₂H₄·H₂O under mild conditions. With this effective methodology, a library of symmetrical and unsymmetrical azoarene derivatives was successfully converted to their corresponding hydrazo derivatives. Further, this protocol was extended to the TH of nitroarenes to amines with good-to-excellent yields. Several kinetic studies along with Hammett studies were carried out to understand the plausible mechanism and the electronic effects in this transformation. This inexpensive catalyst can be recycled up to five times without considerable loss of catalytic activity.

Enhancing the catalytic performance of Co-N-C derived from ZIF-67 by mesoporous silica encapsulation for chemoselective hydrogenation of furfural

Developing Cr-free and non-noble metal catalysts with high activity, selectivity and durability for chemoselective hydrogenation of furfural to furfuryl alcohol is highly desirable yet challenging. In this study, we design a hollow mesoporous Co-N-C@mSiO₂ nanostructure derived from ZIF-67 via the encapsulation-pyrolysis strategy. The Co-N-C@mSiO₂ catalyst exhibits excellent catalytic performance in the furfural hydrogenation towards furfuryl alcohol with good stability, and is much better than the Co-N-C catalyst originating from plain ZIF-67 and other reported transition metal catalysts. Characterization methods and control experiments show that Co-N_x species rather than Co metal should be catalytically active sites for the above reaction. The enhanced performance is associated with abundant Co-N_x active sites, good mass transport, and the SiO₂ shell protection. This work provides a novel and facile strategy for preparing highly efficient non-precious metal catalysts to replace Cr-based and noble metal catalysts for furfural hydrogenation.

Single-atom nanozymes Co-N-C as an electrochemical sensor for detection of bioactive molecules

A properly designed sensing interface is crucial for the accurate and sensitive detection of biologically active molecules. Single-atom nanozymes from transition metal and nitrogen-doped carbon materials (M-N-C) have caught attention owing to their large surface area and strong bionic enzyme activity. Herein, a three-dimensional layered electrochemical electrode consisting of a Co-N-C nanoenzyme embedded in a reduced graphene oxide aerogel was prepared for the detection of hydrogen peroxide (H₂O₂), dopamine (DA) and uric acid (UA). Due to its unique three-dimensional layered structure, rGA has excellent electrical conductivity and high material loading and is used to enhance the electrocatalytic performance of Co-N-C. The combination of single-atom nanozymes and electrochemical detection shows unique advantages in catalytic activity and selectivity. The limit of detection and detection range are 0.74 μM and 3-2991 μM respectively for H₂O_2. Furthermore, it has been successfully implemented for the in-situ detection of H₂O₂ in living cells. In addition, their simultaneous detection is also realized by the sensors for DA and UA. And it can accurately capture the signal of UA and DA in the urine. Meanwhile, the electrode displays satisfactory stability and repeatability. Therefore, this paper provides a new detection strategy for a variety of bioactive molecules, showing great potential in cell biology, pathophysiology and diagnostics.

Atomically Dispersed Co-N/C Catalyst for Divergent Synthesis of Nitrogen-Containing Compounds from Alkenes

Alkene functionalization with a single-atom catalyst (SAC) which merges homogeneous and heterogeneous catalysis is a fascinating route to obtain high-value-added molecules. However, C-N bond formation of alkene with SAC is still unexplored. Herein, a bimetal-organic framework-derived Co-N/C catalyst with an atomically dispersed cobalt center is reported to show good activity of chemoselective aziridination/oxyamination reactions from alkene and hydroxylamine, and late-stage functionalization of complex alkenes and diversified synthetic transformations of the aziridine product further expand the utility of this method. Moreover, this system proceeds without external oxidants and exhibits mild, atom-economic, and recyclable characters. Detailed spectroscopic characterizations and mechanistic studies revealed the structure of the catalytic center and possible intermediates involved in the mechanism cycle.

Constructing NCuS Interface Chemical Bonds over SnS2 for Efficient Solar-Driven Photoelectrochemical Water Splitting

The restricted charge transfer and slow oxygen evolution reaction (OER) dynamics tremendously hamper the realistic implementation of SnS₂ photoanodes for photoelectrochemical (PEC) water splitting. Here, a novel strategy is developed to construct interfacial NCuS bonds between NC skeletons and SnS₂ (CuNC@SnS₂ ) for efficient PEC water splitting. Compared with SnS₂ , the PEC activity of CuNC@SnS₂ photoelectrode is tremendously heightened, obtaining a current density of 3.40 mA cm² at 1.23 V_RHE with a negatively shifted onset potential of 0.04 V_RHE , which is 6.54 times higher than that of SnS₂ . The detailed experimental characterizations and theoretical calculation demonstrate that the interfacial NCuS bonds enhance the OER kinetic, reduce the surface overpotential, facilitate the separation of photon-generated carriers, and provide a fast transmission channel for electrons. This work presents a new approach for modulating charge transfer by interfacial bond design in heterojunction photoelectrodes toward promoting PEC performance and solar energy application.

Nitrogen and Phosphorus Dual-Coordinated Single-Atom Mn: MnN2P Active Sites for Catalytic Transfer Hydrogenation of Nitroarenes

The coordination environment of atomically metal sites can modulate the electronic states and geometric structure of single-atom catalysts, which determine their catalytic performance. In this work, the porous carbon-supported N, P dual-coordinated Mn single-atom catalyst was successfully prepared via the phosphatization of zeolitic imidazolate frameworks and followed by pyrolysis at 900 °C. The optimal Mn₁-N/P-C catalyst with atomic MnN₂P structure has displayed better catalytic activity than the related catalyst with Mn-N_x structure in catalytic transfer hydrogenation of nitroarenes using formic acid as the hydrogen donor. We find that the doping of P source plays a crucial role in improving the catalytic performance, which affects the morphology and electronic properties of catalyst. This is the first Mn heterogeneous catalyst example for the reduction of nitroarenes, and it also revealed that the MnN₂P configuration is a more promising alternative in heterogeneous catalysis.

Recent Insight in Transition Metal Anchored on Nitrogen-Doped Carbon Catalysts: Preparation and Catalysis Application

The design and preparation of novel, high-efficiency, and low-cost heterogeneous catalysts are important topics in academic and industry research. In the past, inorganic materials, metal oxide, and carbon materials were used as supports for the development of heterogeneous catalysts due to their excellent properties, such as high specific surface areas and tunable porous structures. However, the properties of traditional pristine carbon materials cannot keep up with the sustained growth and requirements of industry and scientific research, since the introduction of nitrogen atoms into carbon materials may significantly enhance a variety of their physicochemical characteristics, which gradually become appropriate support for synthesizing supported transition metal catalysts. In the past several decades, the transition metal anchored on nitrogen-doped carbon catalysts has attracted a tremendous amount of interest as potentially useful catalysts for diverse chemical reactions. Compared with original carbon support, the doping of nitrogen atoms can significantly regulate the physicochemical properties of carbon materials and allow active metal species uniformly dispersed on the support. The various N species in support also play a critical role in accelerating the catalytic performance in some reactions. Besides, the interaction between support and transition metal active sites can offer an anchor site to stabilize metal species during the preparation process and then improve reaction performance, atomic utilization, and stability. In this review, we highlight the recent advances and the remaining challenges in the preparation and application of transition metal anchored on nitrogen-doped carbon catalysts.

Homogeneity of Supported Single-Atom Active Sites Boosting the Selective Catalytic Transformations

Selective conversion of specific functional groups to desired products is highly important but still challenging in industrial catalytic processes. The adsorption state of surface species is the key factor in modulating the conversion of functional groups, which is correspondingly determined by the uniformity of active sites. However, the non-identical number of metal atoms, geometric shape, and morphology of conventional nanometer-sized metal particles/clusters normally lead to the non-uniform active sites with diverse geometric configurations and local coordination environments, which causes the distinct adsorption states of surface species. Hence, it is highly desired to modulate the homogeneity of the active sites so that the catalytic transformations can be better confined to the desired direction. In this review, the construction strategies and characterization techniques of the uniform active sites that are atomically dispersed on various supports are examined. In particular, their unique behavior in boosting the catalytic performance in various chemical transformations is discussed, including selective hydrogenation, selective oxidation, Suzuki coupling, and other catalytic reactions. In addition, the dynamic evolution of the active sites under reaction conditions and the industrial utilization of the single-atom catalysts are highlighted. Finally, the current challenges and frontiers are identified, and the perspectives on this flourishing field is provided.

Platinum clusters anchored on sulfur-doped ordered mesoporous carbon for chemoselective hydrogenation of halogenated nitroarenes

Chemoselective hydrogenation of unsaturated organic compounds is a significant research topic in the catalysis field. Herein, a sulfur-doped ordered mesoporous carbon (SMC) material was prepared to anchor ultrafine platinum (Pt) clusters for the chemoselective hydrogenation of halogenated nitroarenes. The confinement effect of the ordered pores and the strong metal-support interaction caused by Pt clusters and sulfur atoms, efficiently suppress the aggregation and regulate the electronic states of the ultrafine Pt clusters. Thus, the hydrogenation of parachloronitrobenzene (p-CNB) shows high selectivity catalyzed by the ultrafine Pt clusters with electron-rich states. Meanwhile, the catalytic performance of the hydrogenation reaction catalyzed by Pt/SMC is capable of being maintained after at least 5 cycles, and the catalytic universality can also be applied to different halogenated nitroarenes hydrogenation. Therefore, this study may promote the research into the construction of noble metal-based catalysts for chemoselective hydrogenation reactions in green and sustainable chemical processes.

Highly-efficient RuNi single-atom alloy catalysts toward chemoselective hydrogenation of nitroarenes

The design and exploitation of high-performance catalysts have gained considerable attention in selective hydrogenation reactions, but remain a huge challenge. Herein, we report a RuNi single atom alloy (SAA) in which Ru single atoms are anchored onto Ni nanoparticle surface via Ru–Ni coordination accompanied with electron transfer from sub-surface Ni to Ru. The optimal catalyst 0.4% RuNi SAA exhibits simultaneously improved activity (TOF value: 4293 h–1) and chemoselectivity toward selective hydrogenation of 4-nitrostyrene to 4-aminostyrene (yield: >99%), which is, to the best of our knowledge, the highest level compared with reported heterogeneous catalysts. In situ experiments and theoretical calculations reveal that the Ru–Ni interfacial sites as intrinsic active centers facilitate the preferential cleavage of N–O bond with a decreased energy barrier by 0.28 eV. In addition, the Ru–Ni synergistic catalysis promotes the formation of intermediates (C8H7NO* and C8H7NOH*) and accelerates the rate-determining step (hydrogenation of C8H7NOH*).

Unveiling the role of cobalt species in the Co/N-C catalysts-induced peroxymonosulfate activation process

In this study, three Co/N-C catalysts were prepared by pyrolysis of bimetallic zeolitic imidazole frameworks with different Co/Zn ratio, and the critical active Co species in peroxymonosulfate (PMS) activation was investigated. The three catalysts had distinct cobalt species but similar N configuration and graphitization degree. The Co species were distributed as single atoms (Co SAs) at a Co/Zn molar ratio of 1:8, while Co nanoclusters (Co NCs) and Co nanoparticles (NPs) would be formed with further increase in Co content. The degradation efficiency of BPA did not show correlation with the increasing of Co content in catalyst. Based on the catalytic performance comparison and reactive species detection, Co SAs was identified as active sites, which could interact with PMS to generate ¹O₂ via path of PMS→HOO*→O*→¹O₂. However, the role of NCs and NPs in directly activating PMS was negligible. In addition, the increase of Co content in Co/N-C catalyst would result in mass cobalt leaching, which enhanced the BPA degradation via homogeneous catalytic reactions with Co^IV as reactive species. It is an effective way to design the Co/N-C catalyst with high catalytic activity and stability via regulating the formation of Co SAs.

Unprecedentedly high activity and selectivity for hydrogenation of nitroarenes with single atomic Co1-N3P1 sites

Transition metal single atom catalysts (SACs) with M₁-N_x coordination configuration have shown outstanding activity and selectivity for hydrogenation of nitroarenes. Modulating the atomic coordination structure has emerged as a promising strategy to further improve the catalytic performance. Herein, we report an atomic Co₁/NPC catalyst with unsymmetrical single Co₁-N₃P₁ sites that displays unprecedentedly high activity and chemoselectivity for hydrogenation of functionalized nitroarenes. Compared to the most popular Co₁-N₄ coordination, the electron density of Co atom in Co₁-N₃P₁ is increased, which is more favorable for H₂ dissociation as verified by kinetic isotope effect and density functional theory calculation results. In nitrobenzene hydrogenation reaction, the as-synthesized Co₁-N₃P₁ SAC exhibits a turnover frequency of 6560 h⁻¹, which is 60-fold higher than that of Co₁-N₄ SAC and one order of magnitude higher than the state-of-the-art M₁-N_x-C SACs in literatures. Furthermore, Co₁-N₃P₁ SAC shows superior selectivity (>99%) toward many substituted nitroarenes with co-existence of other sensitive reducible groups. This work is an excellent example of relationship between catalytic performance and the coordination environment of SACs, and offers a potential practical catalyst for aromatic amine synthesis by hydrogenation of nitroarenes.

Modulating the atomic coordination structure has emerged as a promising strategy to further improve catalytic performance. Here, the authors report an atomic Co1/NPC catalyst with unsymmetrical single Co1N3P1 sites that displays high activity and chemoselectivity for hydrogenation of functionalized nitroarenes.

Construction of a sandwich-like UiO-66-NH2@Pt@mSiO2 catalyst for one-pot cascade reductive amination of nitrobenzene with benzaldehyde

Heterogeneous noble metal-based catalysts with stable, precise structures and high catalytic performance are of great research interest for sustainable catalysis. Herein, we designed the novel sandwich-like metal-organic-framework composite nanocatalyst UiO-66-NH₂@Pt@mSiO₂ using UiO-66-NH₂@Pt as the core, and mesoporous SiO₂ as the shell. The obtained UiO-66-NH₂@Pt@mSiO₂ catalyst shows a well-defined structure and interface, and the protection of the mSiO₂ shell can efficiently prevent Pt NPs from aggregating and leaching in the reaction process. In the one-pot cascade reaction of nitroarenes and aromatic aldehydes to secondary amines, UiO-66-NH₂@Pt@mSiO₂ shows excellent catalytic performance due to acid catalytic sites provided by UiO-66-NH₂ and Pt hydrogenation catalytic sites. Furthermore, the porous structure of the UiO-66-NH₂@Pt@mSiO₂ catalyst also enhances reactant diffusion and improves the reaction efficiency. This work provides a new avenue to meticulously design well-defined nanocatalysts with superior catalytic performance and stability for challenging reactions.

Nickel carbide (Ni3C) nanoparticles for catalytic hydrogenation of model compounds in solvent

Nickel carbide nanoparticles (Ni3C) synthesized in high-boiling point solvent are used as colloidal catalysts for the hydrogenation of polar groups and hydrocarbons. They are stable under operating conditions (100 °C, 7 bar H2).

A gram-scale fabrication of core–shell copper nanoparticles for efficient hydrogenation of nitroarenes

Herein, a series of core–shell catalysts (defined as Cu@NC/PC) has been designed and synthesized for the first time using a functional polymer assistant strategy.

Highly active heterogeneous hydrogenation catalysts prepared from cobalt complexes and rice husk waste

Highly active heterogeneous catalysts for the hydrogenation of nitro compounds were made by pyrolysis of rice husk waste impregnated with cobalt complexes followed by base-treatment. The catalysts show high selectivity and broad substrate scope.

Hierarchical Graphitic Carbon-Encapsulating Cobalt Nanoparticles for Catalytic Hydrogenation of 2,4-Dinitrophenol

Cobalt hierarchical graphitic carbon nanoparticles (Co@HGC) (1), (2), and (3) were prepared by simple pyrolysis of a cobalt phenanthroline complex in the presence of anthracene at different temperatures and heating times, under a nitrogen atmosphere. The samples were used for the catalytic hydrogenation of 2,4-dinitrophenol. Samples (1) and (3) were prepared by heating at 600 °C and 800 °C respectively, while (2) was prepared by heating at 600 °C with an additional intermediate stage at 300 °C. This work revealed that graphitization was catalyzed by cobalt nanoparticles and occurred readily at temperatures of 600 °C and above. The nanocatalysts were characterized by Scanning Electron Microscopy SEM, energy dispersive X-ray analysis EDX, Raman, Xrd, and XPS. The analysis revealed the presence of cobalt and cobalt oxide species as well as graphitized carbon, while TEM analysis indicated that the nanocatalyst contains mainly cobalt nanoparticles of 3–20 nm in size embedded in a lighter graphitic web. Some bamboo-like multiwall carbon nanotubes and graphitic onion-like nanostructures were observed in (3). The structures and chemical properties of the three catalysts were correlated with their catalytic activities. The apparent rate constants kapp (min−1) of the 2,4-dinitrophenol reductions were 0.34 for (2), 0.17 for (3), 0.04 for (1), 0.005 (no catalyst). Among the three studied catalysts, the highest rate constant was obtained for (2), while the highest conversion yield was achieved by (3). Our data show that an increase in agglomeration of the cobalt species reduces the catalytic activity, while an increase in pyrolysis temperature improves the conversion yield. The nanocatalyst enhances hydrogen generation in the presence of sodium borohydride and reduces 2,4-dinitrophenol to p-diamino phenol. The best nanocatalyst (3) was prepared at 800 °C. It consisted of uniformly distributed cobalt nanoparticles sheltered by hierarchical graphitic carbon. The nanocatalyst is easily separated and recycled from the reaction system and proved to be degradation resistant, to have robust stability, and high activity towards the reduction reaction of nitrophenols.

Highly Dispersed CoNi Alloy Embedded in N-doped Graphitic Carbon for Catalytic Transfer Hydrogenation of Biomass-derived Furfural

The development of efficient, stable, and cost-effective heterogeneous catalysts for catalytic transfer hydrogenation (CTH) of biomass-derived furfural (FAL) is highly desired. Herein, series of N-doped graphitic carbon embedded CoNi bimetallic alloy nanoparticles were fabricated and used for the CTH of FAL to value-added furfuryl alcohol (FOL) with renewable isopropanol as hydrogen donor. Intrinsic catalytic activity examination indicated the catalytic performance of Ni_x Co_y @NGC (x:y=1 : 3, 1 : 1, 3 : 1) nanocatalysts were sensitive to their chemical compositions. The optimal Ni₁ Co₁ @NGC nanocatalyst with Ni/Co mole ratio of 1 : 1 afforded a largest FOL yield of 89.3% with nearly full conversion of FAL. The synergistic effect enabled by bimetallic alloys and the abundant N-based Lewis base sites and surface Co-N active species were revealed based on systematic structural characterization, responsible for the excellent catalytic efficiency of bimetallic Ni₁ Co₁ @NGC nanocatalyst for CTH of FAL.