Role of Ligand-Bound CO2 in the Hydrogenation of CO2 to Formate with a (PNP)Mn Catalyst

Ligand-Bound CO2 as a Nonclassical Route toward Efficient Photocatalytic CO2 Reduction with a Ni N-Confused Porphyrin

Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.

Impact of the Methylene Bridge Substitution in Chelating NHC-Phosphine Mn(I) Catalyst for Ketone Hydrogenation

Systematic modification of the chelating NHC-phosphine ligand (NHC = N-heterocyclic carbene) in highly efficient ketone hydrogenation Mn(I) catalyst fac-[(Ph2PCH2NHC)Mn(CO)3Br] has been performed and the catalytic activity of the resulting complexes was evaluated using acetophenone as a benchmark substrate. While the variation of phosphine and NHC moieties led to inferior results than for a parent system, the incorporation of a phenyl substituent into the ligand methylene bridge improved catalytic performance by ca. 3 times providing maximal TON values in the range of 15000-20000. Mechanistic investigation combining experimental and computational studies allowed to rationalize this beneficial effect as an enhanced stabilization of reaction intermediates including anionic hydride species fac-[(Ph2PC(Ph)NHC)Mn(CO)3H]- playing a crucial role in the hydrogenation process. These results highlight the interest of such carbon bridge substitution strategy being rarely employed in the design of chemically non-innocent ligands.

Thermodynamic and Kinetic Activity Descriptors for the Catalytic Hydrogenation of Ketones

Activity descriptors are a powerful tool for the design of catalysts that can efficiently utilize H2 with minimal energy losses. In this study, we develop the use of hydricity and H- self-exchange rates as thermodynamic and kinetic descriptors for the hydrogenation of ketones by molecular catalysts. Two complexes with known hydricity, HRh(dmpe)2 and HCo(dmpe)2, were investigated for the catalytic hydrogenation of ketones under mild conditions (1.5 atm and 25 °C). The rhodium catalyst proved to be an efficient catalyst for a wide range of ketones, whereas the cobalt catalyst could only hydrogenate electron-deficient ketones. Using a combination of experiment and electronic structure theory, thermodynamic hydricity values were established for 46 alkoxide/ketone pairs in both acetonitrile and tetrahydrofuran solvents. Through comparison of the hydricities of the catalysts and substrates, it was determined that catalysis was observed only for catalyst/ketone pairs with an exergonic H- transfer step. Mechanistic studies revealed that H- transfer was the rate-limiting step for catalysis, allowing for the experimental and computation construction of linear free-energy relationships (LFERs) for H- transfer. Further analysis revealed that the LFERs could be reproduced using Marcus theory, in which the H- self-exchange rates for the HRh/Rh+ and ketone/alkoxide pairs were used to predict the experimentally measured catalytic barriers within 2 kcal mol-1. These studies significantly expand the scope of catalytic reactions that can be analyzed with a thermodynamic hydricity descriptor and firmly establish Marcus theory as a valid approach to develop kinetic descriptors for designing catalysts for H- transfer reactions.

Low-Valent Transition Metalate Anions in Synthesis, Small Molecule Activation, and Catalysis

This review surveys the synthesis and reactivity of low-oxidation state metalate anions of the d-block elements, with an emphasis on contributions reported between 2006 and 2022. Although the field has a long and rich history, the chemistry of transition metalate anions has been greatly enhanced in the last 15 years by the application of advanced concepts in complex synthesis and ligand design. In recent years, the potential of highly reactive metalate complexes in the fields of small molecule activation and homogeneous catalysis has become increasingly evident. Consequently, exciting applications in small molecule activation have been developed, including in catalytic transformations. This article intends to guide the reader through the fascinating world of low-valent transition metalates. The first part of the review describes the synthesis and reactivity of d-block metalates stabilized by an assortment of ligand frameworks, including carbonyls, isocyanides, alkenes and polyarenes, phosphines and phosphorus heterocycles, amides, and redox-active nitrogen-based ligands. Thereby, the reader will be familiarized with the impact of different ligand types on the physical and chemical properties of metalates. In addition, ion-pairing interactions and metal-metal bonding may have a dramatic influence on metalate structures and reactivities. The complex ramifications of these effects are examined in a separate section. The second part of the review is devoted to the reactivity of the metalates toward small inorganic molecules such as H2, N2, CO, CO2, P4 and related species. It is shown that the use of highly electron-rich and reactive metalates in small molecule activation translates into impressive catalytic properties in the hydrogenation of organic molecules and the reduction of N2, CO, and CO2. The results discussed in this review illustrate that the potential of transition metalate anions is increasingly being tapped for challenging catalytic processes with relevance to organic synthesis and energy conversion. Therefore, it is hoped that this review will serve as a useful resource to inspire further developments in this dynamic research field.

Activated Mn-MACHO Complexes Form Stable CO2 Adducts

Manganese(I) carbonyl complexes bearing a MACHO-type ligand (HN(CH2 CH2 PR2 )2 ) readily react in their amido form with CO2 to generate 4-membered {Mn-N-C-O} metallacycles. The stability of the adducts decreases with the steric demand of the R groups at phosphorous (R=isopropyl>adamantyl). The CO2 -adducts display generally a lower reactivity as compared to the parent amido complexes. These adducts can thus be interpretated as masked forms of the active amido catalysts and potentially play important roles as off-loop species or branching points in catalytic transformations of carbon dioxide.

CO2 reduction reaction on Sc-doped nanocages as catalysts

CONTEXT

The catalytic ability of Sc-doped C46 and Sc-doped Al23P23 as catalysts of CO2-RR to create the CH4 and CH3OH is investigated. The mechanisms of CO2-RR are examined by theoretical methods and ΔGreaction of reaction steps of CO2-RR mechanisms are calculated. The overpotential of CH4 and CH3OH production on Sc-doped C46 and Sc-doped Al23P23 is calculated. The Sc atoms of Sc-doped C46 and Sc-doped Al23P23 can adsorb the CO2 molecule as the first step of CO2-RR. The CH4 is produced from hydrogenation of *CH3O and the *CO → *CHO reaction step is the rate limiting step for CH4 production. The CH3OH can be formed on Sc-doped C46 and Sc-doped Al23P23 by *CO → *CHO → *CH2O → *CH3O → CH3OH mechanism and HCOOH → *CHO → *CH2O → *CH3O → CH3OH mechanism. The Sc-C46 and Sc-Al23P23 can catalyze the CO2-RR to produce the CH4 and CH3OH by acceptable mechanisms.

METHODS

Here, the structures are optimized by PW91PW91/6-311+G (2d, 2p) and M06-2X/cc-pVQZ methods in GAMESS software. The frequencies of nanocages and their complexes with species of CO2-RR are investigated by mentioned methods. The transition state of each reaction step of CO2-RR is searched by Berny method to find the CO2-RR intermediates. The ∆Eadsorption of intermediates of CO2-RR on surfaces of nanocages is calculated and the ∆Greaction of reaction steps of CO2-RR is calculated.

Hydrogenation of CO2 by a Bifunctional PC(sp3 )P Iridium(III) Pincer Complex Equipped with Tertiary Amine as a Functional Group

Reversible hydrogen storage in the form of stable and mostly harmless chemical substances such as formic acid (FA) is a cornerstone of a fossil fuels-free economy. In the past, we have reported a primary amine-functionalized bifunctional iridium(III)-PC(sp3 )P pincer complex as a mild and chemoselective catalyst for the additive-free decomposition of neat formic acid. In this manuscript, we report on the successful application of a redesigned complex bearing tertiary amine functionality as a catalyst for mild hydrogenation of CO2 to formic acid. The catalyst demonstrates TON up to 6×104 and TOF up to 1.7×104  h-1 . In addition to the practical value of the catalyst, experimental and computational mechanistic studies provide the rationale for the design of improved next-generation catalysts.

Activation of robust bonds by carbonyl complexes of Mn, Fe and Co

Metal carbonyl complexes possess among the most storied histories of any compound class in organometallic chemistry. Nonetheless, these old dogs continue to be taught new tricks. In this Feature, we review the historic discoveries and recent advances in cleaving robust bonds (e.g., C-H, C-O, C-F) using carbonyl complexes of three metals: Mn, Fe, and Co. The use of Mn, Fe, and Co carbonyl catalysts in controlling selectivity during hydrofunctionalization reactions is also discussed. The chemistry of these earth-abundant metals in the field of robust bond functionalization is particularly relevant in the context of sustainability. We expect that an up-to-date perspective on these seemingly simple organometallic species will emphasize the wellspring of reactivity that continues to be available for discovery.

Structure and Thermodynamic Hydricity in Cobalt(triphosphine)(monophosphine) Hydrides

The mononuclear cobalt hydride complex [HCo(triphos)(PMe3)], in which triphos = PhP(CH2CH2PPh2)2, was synthesized and characterized by X-ray crystallography and by 1H and 31P NMR spectroscopy. The geometry of the compound is a distorted trigonal bipyramid in which the axial positions are occupied by the hydride and the central phosphorus atom of the triphos ligand, while the PMe3 and terminal triphos donor atoms occupy the equatorial positions. Protonation of [HCo(triphos)(PMe3)] generates H2 and the Co(I) cation, [Co(triphos)(PMe3)]+, and this reaction is reversible under an atmosphere of H2 when the proton source is weakly acidic. The thermodynamic hydricity of HCo(triphos)(PMe3) was determined to be 40.3 kcal/mol in MeCN from measurements of these equilibria. The reactivity of the hydride is, therefore, well suited to CO2 hydrogenation catalysis. Density functional theory (DFT) calculations were performed to evaluate the structures and hydricities of a series of analogous cobalt(triphosphine)(monophosphine) hydrides where the phosphine substituents are systematically changed from Ph to Me. The calculated hydricities range from 38.5 to 47.7 kcal/mol. Surprisingly, the hydricities of the complexes are generally insensitive to substitution at the triphosphine ligand, as a result of competing structural and electronic trends. The DFT-calculated geometries of the [Co(triphos)(PMe3)]+ cations are more square planar when the triphosphine ligand possesses bulkier phenyl groups and more tetrahedrally distorted when the triphosphine ligand has smaller methyl substituents, reversing the trend observed for [M(diphosphine)2]+ cations. More distorted structures are associated with an increase in ΔGH-°, and this structural trend counteracts the electronic effect in which methyl substitution at the triphosphine is expected to yield smaller ΔGH-° values. However, the steric influence of the monophosphine follows the normal trend that phenyl substituents give more distorted structures and increased ΔGH-° values.

The Mechanism of Markovnikov-Selective Epoxide Hydrogenolysis Catalyzed by Ruthenium PNN and PNP Pincer Complexes

The homogeneous catalysis of epoxide hydrogenolysis to give alcohols has recently received significant attention. Catalyst systems have been developed for the selective formation of either the Markovnikov (branched) or anti-Markovnikov (linear) alcohol product. Thus far, the reported catalysts exhibiting Markovnikov selectivity all feature the potential for Noyori/Shvo-type bifunctional catalysis, with either a RuH/NH or FeH/OH core structure. The proposed mechanisms of epoxide ring-opening have involved cooperative C-O bond hydrogenolysis involving the metal hydride and the acidic pendant group on the ligand, in analogy to the well-documented mechanism of polar double-bond hydrogenation exhibited by catalysts of this type. In this work, we present a combined computational/experimental study of the mechanism of epoxide hydrogenolysis catalyzed by Noyori-type PNP and PNN complexes of ruthenium. We find that, at least for these ruthenium systems, the previously proposed bifunctional pathway for epoxide ring-opening is energetically inaccessible; instead, the ring-opening proceeds through opposite-side nucleophilic attack of the ruthenium hydride on the epoxide carbon, without the involvement of the ligand N-H group. For both catalyst systems, the rate law and overall barrier predicted by density functional theory (DFT) are consistent with the results from kinetic studies.

Synergistic Effects of Lewis Acid-Base Pair Sites─Hf-MOFs with Functional Groups as Distinguished Catalysts for the Cycloaddition of Epoxides with CO2

The incorporation of Lewis acid-base sites in catalysts has been considered as a significant approach to fabricating bifunctional catalysts with efficient catalytic activity for CO₂ fixation. In this paper, a series of Hafnium-based metal-organic frameworks (Hf-MOFs), NU-912(Hf) and NU-912-X(Hf)-X (X = -NH₂, -Br, -CN, and -I) derivatives assembled by Lewis acidic Hf₆(μ₃-O)₄(μ₃-OH)₄(H₂O)₄(OH)₄ (Hf₆) clusters and Lewis base-attached organic linkers, are successfully synthesized by a facile ligand functionalization method. These isostructural Hf-MOFs, which exhibit diamond channels of 1.3 nm diameter, great chemical stability, and CO₂ adsorption capacity, have been evaluated as catalysts for the CO₂ cycloaddition reaction with epoxides. Catalytic experiments reveal that the micropore environments of these MOFs have an outstanding impact on catalytic activity. Remarkably, NU-912(Hf)-I serves as an efficient heterogeneous catalyst for this catalytic reaction under mild conditions due to the high density of Lewis acid Hf₆ cluster centers and strong Lewis base functional groups, surpassing most of the reported MOF-based catalysts.

Metal-Ligand Cooperativity in MnI -Catalysed N-Formylation of Secondary Amides and Lactams Using CO2 at Room Temperature

A Mn^I catalyst featuring redox-active tridentate phenalenyl (PLY) ligand has been used for catalytic N-formylation of secondary amides and lactams under 1 atm CO₂ as a C₁ source at room temperature for the first time. The protocol is applicable to a wide range of secondary amides including heterocycles, bio-active cinnamide derivatives and the diversification of therapeutic molecules. In-depth mechanistic investigations based on experimental outcomes and DFT calculations suggested an unconventional metal-ligand cooperation, where a ligand-centred radical plays a crucial role in initiating the reaction process.

Highly Selective Monomethylation of Amines with CO2 /H2 via Ag/Al2 O3 as a Catalyst

The selective synthesis of monomethylated amines with CO₂ is particularly challenging because the formation of tertiary amines is thermodynamically more favorable. Herein, a new strategy for the controllable synthesis of N-monomethylated amines from primary amines and CO₂ /H₂ is explored. First-principle calculations reveal that the dissociation of H₂ via an heterolytic route reduces the reactivity of methylated amines and thus inhibit successive methylation. In situ DRIFTS proves the process of formation and decomposition of ammonium salt by secondary amine reversible binding with H⁺ on the Ag/Al₂ O₃ catalyst, thereby reducing its reactivity. Meanwhile, the energy barrier for the rate-determining step of monomethylation was much lower than that of overmethylation (0.34 eV vs. 0.58 eV) means amines monomethylation in preference to successive methylation. Under optimal reaction conditions, a variety of amines were converted to the corresponding monomethylated amines in good to excellent yields, and more than 90 % yield of product was obtained.

Large changes in hydricity as a function of charge and not metal in (PNP)M–H (de)hydrogenation catalysts that undergo metal–ligand cooperativity

Ligand pKa and metal hydricity scale with one another in (de)hydrogenation catalysts that undergo metal–ligand cooperativity, irrespective of metal or ligand identity. Anionic hydrides are significantly more hydridic than their neutral counterparts.

Manganese Promoted (Bi)carbonate Hydrogenation and Formate Dehydrogenation: Toward a Circular Carbon and Hydrogen Economy

We report here a feasible hydrogen storage and release process by interconversion of readily available (bi)carbonate and formate salts in the presence of naturally occurring α-amino acids. These transformations are of interest for the concept of a circular carbon economy. The use of inorganic carbonate salts for hydrogen storage and release is also described for the first time. Hydrogenation of these substrates proceeds with high formate yields in the presence of specific manganese pincer catalysts and glutamic acid. Based on this, cyclic hydrogen storage and release processes with carbonate salts succeed with good H₂ yields.

Selectively Regulating Lewis Acid-Base Sites in Metal-Organic Frameworks for Achieving Turn-On/Off of the Catalytic Activity in Different CO2 Reactions

Regulating Lewis acid-base sites in catalysts to investigate their influence in the chemical fixation of CO₂ is significant but challenging. A metal-organic framework (MOF) with open metal Co sites, {(NH₂ Me₂ )[Co₃ (μ₃ -OH)(BTB)₂ (H₂ O)]⋅9 H₂ O⋅5 DMF}_n (1), was obtained and the results of the catalytic investigation show that 1 can catalyze cycloaddition of CO₂ and aziridines to give 99 % yield. The efficiency of the cyclization of CO₂ with propargyl amines is only 32 %. To improve the catalytic ability of 1, ligand XN with Lewis base sites was introduced into 1 and coordinated with the open Co sites, resulting in a decrease of the Lewis acid sites and an increase in the Lewis base sites in a related MOF 2 ({(NH₂ Me₂ )[Co₃ (μ₃ -OH)(NHMe₂ )(BTB)₂ (XN)]⋅8 H₂ O⋅4 DMF}_n ). Selective regulation of the type of active centers causes the yield of oxazolidinones to be enhanced by about 2.4 times, suggesting that this strategy can turn on/off the catalytic activity for different reactions. The catalytic results from 2 treated with acid solution support this conclusion. This work illuminates a MOF-construction strategy that produces efficient catalysts for CO₂ conversion.

Cooperative Activation of CO2 and Epoxide by a Heterobinuclear Al-Fe Complex via Radical Pair Mechanisms

Activation of inert molecules like CO₂ is often mediated by cooperative chemistry between two reactive sites within a catalytic assembly, the most common form of which is Lewis acid/base bifunctionality observed in both natural metalloenzymes and synthetic systems. Here, we disclose a heterobinuclear complex with an Al-Fe bond that instead activates CO₂ and other substrates through cooperative behavior of two radical intermediates. The complex L^dipp(Me)AlFp (2, L^dipp = HC{(CMe)(2,6-ⁱPr₂C₆H₃N)}₂, Fp = FeCp(CO)₂, Cp = η⁵-C₅H₅) was found to insert CO₂ and cyclohexene oxide, producing L^dippAl(Me)(μ:κ₂-O₂C)Fp (3) and L^dippAl(Me)(μ-OC₆H₁₀)Fp (4), respectively. Detailed mechanistic studies indicate unusual pathways in which (i) the Al-Fe bond dissociates homolytically to generate formally Al^II and Fe^I metalloradicals, then (ii) the metalloradicals add to substrate in a pairwise fashion initiated by O-coordination to Al. The accessibility of this unusual mechanism is aided, in part, by the redox noninnocent nature of L^dipp that stabilizes the formally Al^II intermediates, instead giving them predominantly Al^III-like physical character. The redox noninnocent nature of the radical intermediates was elucidated through direct observation of L^dippAl(Me)(OCPh₂) (22), a metalloradical species generated by addition of benzophenone to 2. Complex 22 was characterized by X-band EPR, Q-band EPR, and ENDOR spectroscopies as well as computational modeling. The "radical pair" pathway represents an unprecedented mechanism for CO₂ activation.

Two step activation of Ru-PN3P pincer catalysts for CO2 hydrogenation

Activation of homogeneous catalysts is crucial for their operation. We describe the consecutive double activation of Ru pincer catalyst required to trigger its catalytic activity.

Challenges and recent advancements in the transformation of CO2 into carboxylic acids: straightforward assembly with homogeneous 3d metals

Transformation of carbon dioxide (CO2) into valuable organic carboxylic acids is essential for maintaining sustainability. In this review, such CO2 thermo-, photo- and electrochemical transformations under 3d-transition metal catalysis are described from 2017 until 2022.