Metal Phosphides and Sulfides in Heterogeneous Catalysis: Electronic and Geometric Effects

Construction of iron-doped nickel cobalt phosphide nanoparticles via solvothermal phosphidization and their application in alkaline oxygen evolution

Multi-metallic phosphides offer the possibility to combine the strategies of surface reconstruction, electronic interaction and mechanistic pathway tuning to achieve high electrocatalytic oxygen evolution activity. Here, iron-doped nickel cobalt phosphide nanoparticles (FexCoyNi2-x-yP) with the crystalline NiCoP phase are for the first time synthesized by the solvothermal phosphidization method via the reaction between metal-organic frameworks and white phosphorus. When used to electrochemically catalyze oxygen evolution reaction (OER), the Fe0.4Co0.8Ni0.8P supported by nickel foam requires only 248 mV overpotential to achieve 10 mA cm-2 current densities, and is robust towards the long-term OER in 1 M KOH. The higher number of electrochemically active sites can account for the good OER activity, along with the improved intrinsic activity which is caused by the electron interaction that optimizes the adsorption energy of hydroxyl intermediates, and that increases the acidity of high-valent metal centers. The OER mechanistic pathway involves both adsorbate and lattice oxygen. Surface conversion is observed after OER in alkaline solution, and metal phosphide layer transforms to metal oxides and (oxy)hydroxides.

Structural Ni0-Niδ+ Pair Sites for Highly Active Hydrogenation of Nitriles to Primary Amines

Supported metal pair sites have sparked interest due to their tremendous potential as bifunctional catalysts. Here, we report the structural Ni0-Niδ+ pair sites constructed in a well-defined nanocrystal phase of Ni3P. These Ni0-Niδ+ pair sites exhibited a remarkable product formation rate of 123 molBA/molmetal/h for the hydrogenation of benzonitrile (BN) to benzylamine (BA). The heterogeneity of surface Ni atoms over the Ni3P crystal created two types of metal centers, Ni0 and Niδ+, with a specific spatial distance of 4-5 Å. The Ni0 site acted as the center for H2 activation, while the Niδ+ site served as the adsorption and activation center for the C ≡ N group. The highly efficient cooperation effect of Ni0-Niδ+ pair sites resulted in a TOF of 2915 h-1 in BN hydrogenation, which is 2.4 and 9.7 times higher than that over the mono-Ni0 and -Niδ+ sites, respectively.

Support Engineering for the Stabilisation of Heterogeneous Pd3 P-Based Catalysts for Heck Coupling Reactions

Herein we report the use of a supported Pd3 P catalyst for Heck coupling reactions. For the stabilisation of Pd3 P and Pd, as reference system, the silica support material was modified via phosphorus doping (0.5 and 1 wt % P). Through this so-called support engineering approach, the catalytic activity of Pd3 P was clearly enhanced. Whereas an iodobenzene conversion of 79 % was witnessed for Pd3 P@SiO2 in the coupling of styrene and iodobenzene in 1 h, 90 % conversion could be achieved using Pd3 P@1P-SiO2 . This improved catalytic activity probably stems from an electronic modulation of the support surface via the introduction of phosphorus. Simultaneously, the recyclability was boosted and the Pd3 P@1P-SiO2 catalyst has shown to maintain its catalytic activity over several recovery tests. Hereby, metal leaching could almost be suppressed completely to 3 % by the use of a P-modified silica support.

Ni12P5 Confined in Mesoporous SiO2 with Near-Unity CO Selectivity and Enhanced Catalytic Activity for CO2 Hydrogenation

CO2 hydrogenation via the reverse water gas shift (RWGS) reaction is a promising strategy for CO2 utilization while constructing Ni-based catalysts with high catalytic activity and perfect CO selectivity remains a great challenging. Here, we demonstrate that the product selectivity for CO2 hydrogenation can be significantly tuned from CH4 to CO by phosphating of SiO2-supported Ni catalysts due to the geometric effect. Interestingly, nickel phosphide catalysts with different crystalline phases (Ni12P5 and Ni2P) differ sharply in CO2 conversion, and Ni12P5 is remarkably more active. Furthermore, we developed a facile strategy to confine small Ni12P5 nanoparticles in mesoporous SiO2 channels (Ni12P5@SBA-15). Enhanced activity is exhibited on Ni12P5@SBA-15, ascribed to the highly effective confinement effect. The in situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory calculations unveil that catalytic CO2 hydrogenation follows a direct CO2 dissociation route with adsorbed CO as the key intermediate. Notably, strong multibonded CO (threefold and bridge-bonded CO) is feasibly formed on the Ni catalyst accounting for CH4 as the dominant product whereas only weak linearly bonded CO exists on nickel phosphide catalysts resulting in almost 100% CO selectivity. The present results indicate that Ni12P5@SBA-15 combining the geometric effect and the confinement effect can achieve near-unity CO selectivity and enhanced activity for CO2 hydrogenation.

Transition Metal Phosphide Nanoarchitectonics for Versatile Organic Catalysis

Transition metal phosphides (TMP) posses unique physiochemical, geometrical, and electronic properties, which can be exploited for different catalytic applications, such as photocatalysis, electrocatalysis, organic catalysis, etc. Among others, the use of TMP for organic catalysis is less explored and still facing many complex challenges, which necessitate the development of sustainable catalytic reaction protocols demonstrating high selectivity and yield of the desired molecules of high significance. In this regard, the controlled synthesis of TMP-based catalysts and thorough investigations of underlying reaction mechanisms can provide deeper insights toward practical achievement of desired applications. This review aims at providing a comprehensive analysis on the recent advancements in the synthetic strategies for the tailored and tunable engineering of structural, geometrical, and electronic properties of TMP. In addition, their unprecedented catalytic potential toward different organic transformation reactions is succinctly summarized and critically analyzed. Finally, a rational perspective on future opportunities and challenges in the emerging field of organic catalysis is provided. On the account of the recent achievements accomplished in organic synthesis using TMP, it is highly anticipated that the use of TMP combined with advanced innovative technologies and methodologies can pave the way toward large scale realization of organic catalysis.

A Supported Palladium Phosphide Catalyst for the Wacker-Tsuji-Oxidation of Styrene

The substitution of pure metal particles by metal phosphides in catalysis represents a promising opportunity to lower the required metal quantity in the context of a sustainable use of metal resources. Herein we show the synthesis of palladium phosphide, Pd₃ P, supported on silica, which is tested as catalyst for the Wacker-Tsuji-oxidation of styrene to acetophenone. The synthesized catalyst is characterized by PXRD, SEM-EDX, FTIR, ICP-AES and XPS measurements. Four different reaction systems are investigated in this study including different co-catalysts and reaction media. Conversions of styrene up to 95 % with a selectivity of 73 % towards acetophenone are observed using Pd₃ P/SiO₂ as catalyst, CuCl₂ as co-catalyst and O₂ as oxidant. An enhanced selectivity up to 100 % towards acetophenone is obtained in other reaction systems. The use of Pd₃ P/SiO₂ leads to an optimized selectivity and conversion in the oxidation reaction in comparison with the purely Pd-based system Pd/SiO₂ . These results give an insight on how the incorporation of phosphorus has a great effect on the performance of heterogeneous catalysts.

Synthesis of the Ni2P-Co Mott-Schottky Junction as an Electrocatalyst to Boost Sulfur Conversion Kinetics and Application in Separator Modification in Li-S Batteries

To overcome the shuttling effect and sluggish conversion kinetics of polysulfides, a large number of catalysts have been designed for lithium-sulfur (Li-S) batteries. Herein, a Mott-Schottky junction catalyst composed of Co nanoparticles and Ni₂P was designed to improve polysulfide kinetics. Our investigations reveal the rearrangement of charges at the Schottky junction interface and the construction of the built-in electric field are crucial for lowering the activation energy of the dissolved Li₂S_n reduction and Li₂S nucleation reaction. Furthermore, a series of experimental and electrochemical tests were performed to demonstrate that the Schottky catalytic effect enhanced the synergistic catalytic effect. With a Ni₂P-Co@CNT catalyst, the battery exhibits an initial specific capacity of 874 mAh g^-1 at a rate of 4.0 C, and the decay rate per cycle is 0.049% in 700 cycles. Meanwhile, the battery shows 0.118% decay rate per cycle at 0.5 C in 100 cycles at a high sulfur loading of 10 mg cm^-2. The Schottky heterojunction structure proposed here has been shown to have a good catalytic effect on the reduction of Li₂S_n and nucleation of Li₂S, which provides a profound guidance for efficient and rational catalyst design.

Ruthenium-Alloyed Iron Phosphide Single Crystal with Increased Fermi Level for Efficient Hydrogen Evolution

Transition metal phosphide alloying is an effective approach for optimizing the electronic structure and improving the intrinsic performance of the hydrogen evolution reaction (HER). However, obtaining 3d transition metal phosphides alloyed with noble metals is still a challenge owing to their difference in electronegativity, and the influence of their electronic structure modulated by noble metals on the HER reaction also remains unclear. In this study, we successfully incorporated Ru into an Fe₂P single crystal via the Bridgeman method and used it as a model catalyst, which effectively promoted HER. Hall transport measurements combined with first-principles calculations revealed that Ru acted as an electron dopant in the structure and increased the Fermi level, leading to a decreased water dissociation barrier and an improved electron-transfer Volmer step at low overpotentials. Additionally, the (21̅1) facet of Ru-Fe₂P was found to be more active than its (001) facet, mainly due to the lower H desorption barrier at high overpotentials. The synergistic effect of Ru and Fe sites was also revealed to facilitate H* and OH* desorption compared with Fe₂P. Therefore, this study elucidates the boosting effect of Ru-alloyed iron phosphides and offers new understanding about the relationship between their electronic structure and HER performance.

Sulfide with Oxygen-Rich Carbon Network for Good Lithium-Storage Kinetics

Transition metal sulfides are of great interest as electrode material for alkali metal-ion batteries due to their high theoretical capacity. However, sluggish ion migration and electron transfer kinetics lead to poor cycling stability and rate performance, which hinders their practical applications. Herein, we develop a two-step localized carbonization and sulfurization method to construct a CoS₂ composite material (CoS₂@CNTs@C) from an in situ integrated zeolitic imidazolate framework (ZIF-67) and multiwalled carbon nanotube precursor (ZIF-67@CNTs). The as-prepared CoS₂@CNTs@C composites with a nanoscale carbon skeleton inherit a large specific surface area and suitable nanopore size distribution from ZIF-67 and incredibly abundant oxygenated functional groups from CNTs. The theoretical calculation and material characterization demonstrate that the oxygenated functional groups on the porous carbon networks accelerate lithium-ion diffusion and electron transfer and especially electrocatalyze the progressive conversion of Li₂S₆ to the final product Li₂S. Meanwhile, the three-dimensional conductive network guarantees the conductive and structural stability of CoS₂@CNTs@C during the repeated lithium-storage process. Therefore, the CoS₂@CNTs@C electrode material can deliver an initial discharge capacity of 1282.3 mA h g^-1 at 200 mA g^-1 with a high Coulombic efficiency of 93.5% and a reversible capacity of 558.8 mA h g^-1 at 2000 mA g^-1 in 600 cycles with a high capacity retention of 96.1%.