Efficient Electrocatalytic Oxidation of 5-Hydroxymethylfurfural Coupled with 4-Nitrophenol Hydrogenation in a Water System

Synergistically Enhanced Co-Adsorption of Reactant and Hydroxyl on Platinum-Modified Copper Oxide for High-Performance HMF Oxidation

Electrochemical oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) provides an environmentally friendly route for producing the sustainable polymer monomer 2,5-furandicarboxylic acid (FDCA). Thus, precisely adjusting the synergistic adsorption among key reactive species, such as HMF and OHads, on the carefully designed catalyst surface is essential for achieving satisfactory catalytic performance for HMF oxidation to FDCA as it is closely related to the adsorption strength and configuration of the reaction substrates. This kind of regulation will ultimately facilitate the improvement of HMF oxidation performance. In this work, Pt nanoparticles modified CuO nanowires (denoted as Pt/CuO@CF) are constructed for the selective electrooxidation of HMF to FDCA under alkaline conditions. The well-designed Pt/CuO@CF demonstrates highly impressive catalytic performance across a range of HMF concentrations, ranging from the commonly used concentrations to higher levels typically not explored (10, 25, 50, 75, and 100 mm) with high FEFDCA (all above 95%) and outstanding long-term stability (15 cycles). In situ experimental characterizations confirm that the designed heterogeneous interface between Pt and CuO enhances the enrichment of HMF and OHads species on the catalyst surface. Theoretical calculations reveal the anchored Pt nanoparticles reduce the adsorption barrier for HMF and OHads, thereby promoting the highly selective oxidation of HMF to FDCA.

Cocktail Effect of 4d/5d Band Twisted High-Entropy Alloys on Carbon Nanotube for Hydrazine Splitting

Herein, multi-walled carbon nanotubes (CNT) embedded with RuPdIrPtAu-high entropy alloys (HEA) via pulsed laser irradiation in liquids are successfully fabricated. The resultant composite synergistically enhances hydrazine oxidation reaction (HzOR)-boosted water electrolysis. Notably, HEA with ≈2-5 nm size, are uniformly distributed across the surface of the CNTs. An optimized HEA/CNT-10 demonstrates exceptional performance in oxygen and hydrogen evolution reactions (OER and HER), depicted by ultralow overpotentials of 30.7 and 330 mV at 10 mA cm-2, respectively. By replacing OER with HzOR, HEA/CNT-10 needs a lower potential of 0.1 V to accomplish 10 mA cm-2, as compared to OER (1.56 V vs. RHE). Moreover, the hydrazine splitting electrolyzer desirable a small voltage of 0.242 V to attain 10 mA cm-2, while maintaining exceptional stability. Experimental and DFT studies validate the cocktail effects and role of multiple metal-sites in HEA/CNT-10, which significantly enhance the efficiency of parallel HER||HzOR processes, highlighting its potential in energy-efficient, hydrogen production. In situ Raman probe indicated the configuration of an acidic environment, monitoring of H3O+, during HER, despite the basic conditions. This is attributed to the dominance of the Heyrovsky step, facilitated by the high catalytic activity of the HEA, coupled with protonation of the CNT surface.

Engineering the Morphology and Electronic Structure of NiCo2O4 to Boost the Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Electrocatalytic biomass conversion using green electricity is regarded as an important strategy to meet the requirement of sustainable development. NiCo2O4 electrodes with different morphologies and electronic structures were fabricated by changing the precipitants used in the solvothermal process, and applied in the electrocatalytic 5-hydroxymethylfurfural oxidation (HMFOR). The experimental and theoretical calculation results showed NiCo2O4 nanosheets (NCO-Ns) with low Co/Ni ratio exhibited larger adsorption energy towards HMF and superior intrinsic catalytic activity in HMFOR, while NiCo2O4 nanoneedles (NCO-Nn) with larger electrochemical active surface areas presented faster electron transfer kinetics and enhanced catalytic performance for 50 mM HMF with a higher conversion rate (99.9 %), 2,5-furanodicarboxylic acid (FDCA) selectivity (98.6 %) and faraday efficiency (98.6 %). It indicated that compared with NCO-Ns, NCO-Nn providing more active sites was kinetically favorable for improving HMFOR efficiency. In-situ electrochemical Raman investigation revealed that in strong alkaline media, NiOOH formed by the electrochemical reconstruction of NiCo2O4 surface served as the main active species in HMFOR, and an indirect oxidation mechanism was elucidated. This work established the relationship between the electrocatalytic performance of a catalyst and the surface morphology and electronic structure in HMFOR, provided a new idea for improving the electrocatalytic activity of a catalyst, and supported it experimentally.

Recent Developments in Membrane-Free Hybrid Water Electrolysis for Low-Cost Hydrogen Production Along with Value-Added Products

Water electrolysis using renewable energy is considered as a promising technique for sustainable and green hydrogen production. Conventional water electrolysis has two components - hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) occurring at the cathode and anode respectively. However, electrolysis of water suffers from high overpotential due to the slow kinetics of OER. To overcome this hybrid water electrolysis has been developed by replacing conventional anode oxidation producing oxygen with oxidation of cost-effective materials producing value-added chemicals. This review summarizes recent advances in organic oxidative reactions such as alcohols, urea, hydrazine, and biomass at the anode instead of OER. Furthermore, the review also highlights the use of membrane-free hybrid water electrolysis as a method to overcome the cost and complexity associated with conventional membrane-based electrolyzer thereby improving overall efficiency. This approach holds promise for scalable and cost-effective large-scale hydrogen production along with value-added products. Finally, current challenges and future perspectives are discussed for further development in membrane-free hybrid water electrolysis.

Biomass Valorization via Paired Electrocatalysis

Electrochemical valorization of biomass represents an emerging research frontier, capitalizing on renewable feedstocks to mitigate carbon emissions. Traditional electrochemical approaches often suffer from energy inefficiencies due to the requirement of a second electrochemical conversion at the counter electrode which might generate non-value-added byproducts. This review article presents the advancement of paired electrocatalysis as an alternative strategy, wherein both half-reactions in an electrochemical cell are harnessed to concurrently produce value-added chemicals from biomass-derived feedstocks, potentially doubling the Faradaic efficiency of the whole process. The operational principles and advantages of different cell configurations, including 1-compartment undivided cells, H-type cells, and flow cells, in the context of paired electrolysis are introduced and compared, followed by the analysis of various catalytic strategies, from catalyst-free systems to sophisticated homogeneous and heterogeneous electrocatalysts, tailored for optimized performance. Key substrates, such as CO2, 5-hydroxymethylfurfural (HMF), furfural, glycerol, and lignin are highlighted to demonstrate the versatility and efficacy of paired electrocatalysis. This work aims to provide a clear understanding of why and how both cathode and anode reactions can be effectively utilized in electrocatalytic biomass valorization leading to innovative industrial scalability.

Enhanced mineralization of nitrophenols by a novel C@ZVAl-PS based sequential reduction-oxidation process

Widely employed nitrophenols (NPs) are refractory and antioxidant due to their strong electron-withdrawing group (-NO2). Actually, NPs are readily reduced to aminophenols (APs). However, APs remain toxic and necessitate further treatment. Herein, we utilized a novel sequential reduction-oxidation system of carbon-modified zero-valent aluminum (C@ZVAl) combined with persulfate (PS) for the thorough removal of both NPs and APs. The results demonstrated that p-nitrophenol (PNP, up to 1000 mg/L) exhibited complete reduction to p-aminophenol (PAP), and then over 98.0 % of PAP could be effectively oxidized, in the meantime the removal rate of chemical oxygen demand (COD) was as high as 95.9 %. Based on the SEM and XPS characterizations, we found that C@ZVAl has exceptionally high reactivity that generates massive electrons and reduces PNP to PAP through accelerated electron transfer. In the subsequent oxidation step, PS can be rapidly activated by C@ZVAl to generate SO4- radicals for PAP oxidization. Meanwhile, the mineralization of COD proceeds. The temporal binding of reduction and oxidation can be regulated by varying the PS dosing time. Namely, the appropriate delay in PS dosing facilitates sufficient reduction to provide enough reactants for oxidation, favoring the mineralization of PNP and COD. More crucially, dinitrodiazophenol (DDNP) in an actual explosive wastewater without any pretreatment can be effectively mineralized by this sequential reduction-oxidation system, affirming the excellent performance of this process in practical applications. In conclusion, the C@ZVAl-PS based sequential reduction-oxidation looks very promising for enhanced mineralization of nitro-substituted organic contaminants.

Ligand-Hybridization Activates Lattice-Hydroxyl-Groups of NiCo(OH)x Nanowires for Efficient Electrosynthesis

Electrochemical dehydrogenation of hydroxides plays a crucial role in the formation of high-valence metal active sites toward 5-hydroxymethylfurfural oxidation reaction (HMFOR) to produce the value-added chemical of 2,5-furandicarboxylic (FDCA). Herein, we construct benzoic acid ligand-hybridized NiCo(OH)x nanowires (BZ-NiCo(OH)x) with ample electron-deficient Ni/Co sites for HMFOR. The robust electron-withdrawing capability of benzoic acid ligands in BZ-NiCo(OH)x speeds up the electrochemical activation and dehydrogenation of lattice-hydroxyl-groups (M2+-O-H⇌M3+-O), boosting the formation of abundant electron-deficient and high-valence Ni/Co sites. DFT calculation reveals that the deintercalation proton is prone to establishing a hydrogen bridge with the carbonyl group in benzoic acid, facilitating the proton transfer. Coupled with the synergistic oxidation of Ni/Co sites on hydroxyl and aldehyde groups, BZ-NiCo(OH)x delivers a remarkable current density of 111.20 mA cm-2 at 1.4 V for HMFOR, exceeding that of NiCo(OH)x by approximately fourfold. And the FDCA yield and Faraday efficiency are as high as 95.24 % and 95.39 %, respectively. The ligand-hybridized strategy in this work introduces a novel perspective for designing high-performance transition metal-based electrocatalysts for biomass conversion.

A High-Entropy Oxyhydroxide with a Graded Metal Network Structure for Efficient and Robust Alkaline Overall Water Splitting

Designing high-entropy oxyhydroxides (HEOs) electrocatalysts with controlled nanostructures is vital for efficient and stable water-splitting electrocatalysts. Herein, a novel HEOs material (FeCoNiWCuOOH@Cu) containing five non-noble metal elements derived by electrodeposition on a 3D double-continuous porous Cu support is created. This support, prepared via the liquid metal dealloying method, offers a high specific surface area and rapid mass/charge transfer channels. The resulting high-entropy FeCoNiWCuOOH nanosheets provide a dense distribution of active sites. The heterostructure between Cu skeletons and FeCoNiWCuOOH nanosheets enhances mass transfer, electronic structure coupling, and overall structural stability, leading to excellent activities in the oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and water splitting reaction. At 10 mA cm-2, the overpotentials for OER, HER, and water splitting in 1.0 m KOH solution are 200, 18, and 1.40 V, respectively, outperforming most current electrocatalysts. The catalytic performance remains stable even after operating at 300 mA cm-2 for 100, 100, and over 1000 h, correspondingly. This material has potential applications in integrated hydrogen energy systems. More importantly, density functional theory (DFT) calculations demonstrate the synergy of the five elements in enhancing water-splitting activity. This work offers valuable insights for designing industrial water electrolysis systems.

Bismuth-based electrocatalytic scheme enabling efficient and selective electrosynthesis of 4-aminophenol in acidic media

A highly efficient electrocatalytic platform based on in situ formed metallic bismuth submicron crystals (microBi) was developed for 4-aminophenol electrosynthesis via the electrochemical reduction of 4-nitrophenol at acidic pH. The facile formation and high reactivity of microBi enable efficient electrosynthesis of 4-aminophenol with high selectivity (∼100%) at the expense of an ultra-low overpotential.

Non-Noble Metal Catalysts for Electrooxidation of 5-Hydroxymethylfurfural

2,5-Furandicarboxylic acid (FDCA) is a class of valuable biomass-based platform compounds. The creation of FDCA involves the catalytic oxidation of 5-hydroxymethylfurfural (HMF). As a novel catalytic method, electrocatalysis has been utilized in the 5-hydroxymethylfurfural oxidation reaction (HMFOR). Common noble metal catalysts show catalytic activity, which is limited by price and reaction conditions. Non-noble metal catalyst is known for its environmental friendliness, affordability and high efficiency. The development of energy efficient non-noble metal catalysts plays a crucial role in enhancing the HMFOR process. It can greatly upgrade the demand of industrial production, and has important research significance for electrocatalytic oxidation of HMF. In this paper, the reaction mechanism of HMF undergoes electrocatalytic oxidation to produce FDCA are elaborately summarized. There are two reaction pathways and two oxidation mechanisms of HMFOR discussed deeply. In addition, the speculation on the response of the electrode potential to HMFOR is presented in this paper. The main non-noble metal electrocatalysts currently used are classified and summarized by targeting metal element species. Finally, the paper focus on the mechanistic effects of non-noble metal catalysts in the reaction, and provide the present prospects and challenges in the electrocatalytic oxidation reaction of HMF.

5-Hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Biomass assumes an increasingly vital role in the realm of renewable energy and sustainable development due to its abundant availability, renewability, and minimal environmental impact. Within this context, 5-hydroxymethylfurfural (HMF), derived from sugar dehydration, stands out as a critical bio-derived product. It serves as a pivotal multifunctional platform compound, integral in synthesizing various vital chemicals, including furan-based polymers, fine chemicals, and biofuels. The high reactivity of HMF, attributed to its highly active aldehyde, hydroxyl, and furan ring, underscores the challenge of selectively regulating its conversion to obtain the desired products. This review highlights the research progress on efficient catalytic systems for HMF synthesis, oxidation, reduction, and etherification. Additionally, it outlines the techno-economic analysis (TEA) and prospective research directions for the production of furan-based chemicals. Despite significant progress in catalysis research, and certain process routes demonstrating substantial economics, with key indicators surpassing petroleum-based products, a gap persists between fundamental research and large-scale industrialization. This is due to the lack of comprehensive engineering research on bio-based chemicals, making the commercialization process a distant goal. These findings provide valuable insights for further development of this field.

Seawater electrolysis for fuels and chemicals production: fundamentals, achievements, and perspectives

Seawater electrolysis for the production of fuels and chemicals involved in onshore and offshore plants powered by renewable energies offers a promising avenue and unique advantages for energy and environmental sustainability. Nevertheless, seawater electrolysis presents long-term challenges and issues, such as complex composition, potential side reactions, deposition of and poisoning by microorganisms and metal ions, as well as corrosion, thus hindering the rapid development of seawater electrolysis technology. This review focuses on the production of value-added fuels (hydrogen and beyond) and fine chemicals through seawater electrolysis, as a promising step towards sustainable energy development and carbon neutrality. The principle of seawater electrolysis and related challenges are first introduced, and the redox reaction mechanisms of fuels and chemicals are summarized. Strategies for operating anodes and cathodes including the development and application of chloride- and impurity-resistant electrocatalysts/membranes are reviewed. We comprehensively summarize the production of fuels and chemicals (hydrogen, carbon monoxide, sulfur, ammonia, etc.) at the cathode and anode via seawater electrolysis, and propose other potential strategies for co-producing fine chemicals, even sophisticated and electronic chemicals. Seawater electrolysis can drive the oxidation and upgrading of industrial pollutants or natural organics into value-added chemicals or degrade them into harmless substances, which would be meaningful for environmental protection. Finally, the perspective and prospects are outlined to address the challenges and expand the application of seawater electrolysis.

Catalytic Transformation of Carbohydrates into Renewable Organic Chemicals by Revering the Principles of Green Chemistry

Adherence to the principles of green chemistry in a biorefinery setting ensures energy efficiency, reduces the consumption of materials, simplifies reactor design, and rationalizes the process parameters for synthesizing affordable organic chemicals of desired functional efficacy and ingrained sustainability. The green chemistry metrics facilitate assessing the relative merits and demerits of alternative synthetic pathways for the targeted product(s). This work elaborates on how green chemistry has emerged as a transformative framework and inspired innovations toward the catalytic conversion of biomass-derived carbohydrates into fuels, chemicals, and synthetic polymers. Specific discussions have been incorporated on the judicious selection of feedstock, reaction parameters, reagents (stoichiometric or catalytic), and other synthetic auxiliaries to obtain the targeted product(s) in desired selectivity and yield. The prospects of a carbohydrate-centric biorefinery have been emphasized and research avenues have been proposed to eliminate the remaining roadblocks. The analyses presented in this review will steer to developing superior synthetic strategies and processes for envisaging a sustainable bioeconomy centered on biomass-derived carbohydrates.

Multi-functional integrated design of a copper foam-based cathode for high-performance lithium-oxygen batteries

Lithium-oxygen batteries (LOBs) with extraordinarily high energy density are some of the most captivating energy storage devices. Designing an efficient catalyst system that can minimize the energy barriers and address the oxidant intermediate and side-product issues is the major challenge regarding LOBs. Herein, we have developed a new type of integrated cathode of Cu foam-supported hierarchical nanowires decorated with highly catalytic Au nanoparticles which achieves a good combination of a gas diffusion electrode and a catalyst electrode, contributing to the synchronous multiphase transport of ions, oxygen, and electrons as well as improving the cathode reaction kinetics effectively. Benefiting from such a unique hierarchical architecture, the integrated cathode delivered superior electrochemical performance, including a high discharge capacity of up to 11.5 mA h cm-2 and a small overpotential of 0.49 V at 0.1 mA cm-2, a favorable energy efficiency of 84.3% and exceptional cycling stability with nearly 1200 h at 0.1 mA cm-2 under a fixed capacity of 0.25 mA h cm-2. Furthermore, density functional theory (DFT) calculations further reveal the intrinsic direct catalytic ability to form/decompose Li2O2 during the ORR/OER process. As a consequence, this work provides an insightful investigation on the structural engineering of catalysts and holds great potential for advanced integrated cathode design for LOBs.

Frontiers in Photoelectrochemical Catalysis: A Focus on Valuable Product Synthesis

Photoelectrochemical (PEC) catalysis provides the most promising avenue for producing value-added chemicals and consumables from renewable precursors. Over the last decades, PEC catalysis, including reduction of renewable feedstock, oxidation of organics, and activation and functionalization of C─C and C─H bonds, are extensively investigated, opening new opportunities for employing the technology in upgrading readily available resources. However, several challenges still remain unsolved, hindering the commercialization of the process. This review offers an overview of PEC catalysis targeted at the synthesis of high-value chemicals from sustainable precursors. First, the fundamentals of evaluating PEC reactions in the context of value-added product synthesis at both anode and cathode are recalled. Then, the common photoelectrode fabrication methods that have been employed to produce thin-film photoelectrodes are highlighted. Next, the advancements are systematically reviewed and discussed in the PEC conversion of various feedstocks to produce highly valued chemicals. Finally, the challenges and prospects in the field are presented. This review aims at facilitating further development of PEC technology for upgrading several renewable precursors to value-added products and other pharmaceuticals.

CuO-Ni(OH)2 heterostructure nanosheets: a high-performance electrocatalyst for 5-hydroxymethylfurfural oxidation

CuO-Ni(OH)2 heterostructure nanosheets were designed for efficient electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furanedioic acid (FDCA). The CuO-Ni(OH)2 nanosheets exhibited impressive performance, achieving 100% HMF conversion, 99.8% FDCA yield, and 98.4% faradaic efficiency.

Cu Promoted the Dynamic Evolution of Ni-Based Catalysts for Polyethylene Terephthalate Plastic Upcycling

Upcycling plastic wastes into value-added chemicals is a promising approach to put end-of-life plastic wastes back into their ecocycle. As one of the polyesters that is used daily, polyethylene terephthalate (PET) plastic waste is employed here as the model substrate. Herein, a nickel (Ni)-based catalyst was prepared via electrochemically depositing copper (Cu) species on Ni foam (NiCu/NF). The NiCu/NF formed Cu/CuO and Ni/NiO/Ni(OH)2 core-shell structures before electrolysis and reconstructed into NiOOH and CuOOH/Cu(OH)2 active species during the ethylene glycol (EG) oxidation. After oxidation, the Cu and Ni species evolved into more reduced species. An indirect mechanism was identified as the main EG oxidation (EGOR) mechanism. In EGOR, NiCu60s/NF catalyst exhibited an optimal Faradaic efficiency (FE, 95.8%) and yield rate (0.70 mmol cm-2 h-1) for formate production. Also, over 80% FE of formate was achieved when a commercial PET plastic powder hydrolysate was applied. Furthermore, commercial PET plastic water bottle waste was employed as a substrate for electrocatalytic upcycling, and pure terephthalic acid (TPA) was recovered only after 1 h electrolysis. Lastly, density functional theory (DFT) calculation revealed that the key role of Cu was significantly reducing the Gibbs free-energy barrier (ΔG) of EGOR's rate-determining step (RDS), promoting catalysts' dynamic evolution, and facilitating the C-C bond cleavage.

Fluorine Induced In Situ Formation of High Valent Nickel Species for Ultra Low Potential Electrooxidation of 5-Hydroxymethylfurfural

The Nickel-based catalysts have a good catalytic effect on the 5-hydroxymethylfurfural electrooxidation reaction (HMFOR), but limited by the conversion potential of Ni2+ /Ni3+ , 1.35 V versus RHE, the HMF electrooxidation potential of nickel-based catalysts is generally greater than 1.35 V versus RHE. Considering fluorine has the highest Pauling electronegativity and similar atomic radius of oxygen, the introduction of fluorine into the lattice of metal oxides might promote the adsorption of intermediate species, thus improving the catalytic performance. F is successfully doped into the lattice structure of NiCo2 O4 spinel oxide by the strategy of hydrothermal reaction and low-temperature fluorination. As is confirmed by in situ electrochemical impedance spectroscopy and Raman spectroscopy, the introduction of F weakens the interaction force of metal-oxygen covalent bonds of the asymmetric MT -O-MO backbone and improves the valence of Ni in tetrahedra structure, which makes it easier to be oxidized to higher valence active Ni3+ under the action of electric field and promotes the adsorption of OH- , while the decrease of Co valence enhances the adsorption of HMF with the catalyst. Combining the above reasons, F-NiCo2 O4 shows superb electrocatalytic performance with a potential of only 1.297 V versus RHE at a current density of 20 mA cm-2 , which is lower than the most catalyst.

Treatment of Monochlorobenzene from Polymers Process through Electrochemical Oxidation

With the rapid development of the economy and the demands of people's lives, the usage amount of polymer materials is significantly increasing globally. Chlorobenzenes (CBS) are widely used in the industrial, agriculture and chemical industries, particularly as important chemical raw materials during polymers processes. CBS are difficult to remove due to their properties, such as being hydrophobic, volatile and persistent and biotoxic, and they have caused great harm to the ecological environment and human health. Electrochemical oxidation technology for the treatment of refractory pollutants has been widely used due to its high efficiency and easiness of operation. Thus, the electrochemical oxidation system was established for the efficient treatment of monochlorobenzene (MCB) waste gas. The effect of a single factor, such as anode materials, cathode materials, the electrolyte concentration, current density and electrode distance on the removal efficiency (RE) of MCB gas were first studied. The response-surface methodology (RSM) was used to investigate the relationships between different factors' conditions (current density, electrolyte concentration, electrode distance), and a prediction model was established using the Design-Expert 10.0.1 software to optimize the reaction conditions. The results of the one-factor experiments showed that when treating 2.90 g/m3 MCB gas with a 0.40 L/min flow rate, Ti/Ti4O7 as an anode, stainless steel wire mesh as a cathode, 0.15 mol/L NaCl electrolyte, 10.0 mA/cm2 current density and 4.0 cm electrode distance, the average removal efficiency (RE), efficiency capacity (EC) and energy consumption (Esp) were 57.99%, 20.18 g/(m3·h) and 190.2 (kW·h)/kg, respectively. The results of the RSM showed that the effects of the process parameters on the RE of MBC were as follows: current density > electrode distance > electrolyte concentration; the interactions effects on the RE of MBC were in the order of electrolyte concentration and current density > current density and electrode distance > electrolyte concentration and electrode distance; the optimal experimental conditions were as follows: the concentration of electrolyte was 0.149 mol/L, current density was 18.11 mA, electrode distance was 3.804 cm. Under these conditions, the RE achieved 66.43%. The response-surface variance analysis showed that the regression model reached a significant level, and the validation results were in agreement with the predicted results, which proved the feasibility of the model. The model can be applied to treat the CBS waste gas of polymer processes through electrochemical oxidation.

Enhanced electrocatalytic efficiencies for water electrolysis and para-nitrophenol hydrogenation by self-supported nickel cobalt phosphide-nickel iron layered double hydroxide p-n junction

Charge redistribution across heterointerfaces is an important tactic to enhance the catalytic activities and bifunctionality of hybrid catalysts, especially for green hydrogen production from water electrolysis and harmless electrocatalytic valorization of organics. Herein, a self-supported p-n junction catalytic electrode was constructed by tandem electrodeposition of nickel cobalt phosphide (NiCoP) and nickel iron layered double hydroxide (NiFe LDH) onto Ni foam (NF) substrate, denoted as NiCoP@NiFe LDH/NF, to enhance the electrocatalytic capabilities for water electrolysis and hydrogenation of an organic, para-nitrophenol (4-NP). Benefitting from the charge redistribution across the p-n junction, high electrocatalytic efficiencies for oxygen evolution reaction (OER, overpotential of 388 mV at 100 mA cm-2) and hydrogen evolution reaction (HER, overpotential of 132 mV at 10 mA cm-2) could be achieved concurrently by the NiCoP@NiFe LDH/NF electrode, and both overpotentials were located within the mainstream levels in this domain. The bifunctional catalytic features enabled a full water electrolysis response of 10 mA cm-2 at 1.61 V. In addition, the p-n junction electrode catalyzed the hydrogenation of 4-NP at a conversion of 100%, para-aminophenol (4-AP) selectivity of 90% and faradaic efficiency (FE) of 88% at -0.18 V. The current work offers a feasible strategy for fulfilling electrochemical H2 production and hydrogenation valorization of 4-NP pollutant by constructing a self-supported p-n junction catalytic electrode.

Unraveling the potential-dependent structure evolution in CuO for electrocatalytic biomass valorization

Electrocatalytic oxidation of renewable biomass (such as glucose) into high-value-added chemicals provides an effective approach to achieving carbon neutrality. CuO-derived materials are among the most promising electrocatalysts for biomass electrooxidation, but the identification of their active sites under electrochemical conditions remains elusive. Herein, we report a potential-dependent structure evolution over CuO in the glucose oxidation reaction (GOR). Through systematic electrochemical and spectroscopic characterizations, we unveil that CuO undergoes Cu2+/Cu+ and Cu3+/Cu2+ redox processes at increased potentials with successive generation of Cu(OH)2 and CuOOH as the active phases. In addition, these two structures have distinct activities in the GOR, with Cu(OH)2 being favorable for aldehyde oxidation, and CuOOH showed faster kinetics in carbon-carbon cleavage and alcohol/aldehyde oxidation. This work deepens our understanding of the dynamic reconstruction of Cu-based catalysts under electrochemical conditions and may guide rational material design for biomass valorization.

In Situ Construction of the Fe-Cu Hydroxide Interlocking Structure with Solution-Derived Cu/Ag Current Collectors for Flexible Symmetric Supercapacitors

The current collector serves as a crucial element in supercapacitors, acting as a medium between the electrode material and the substrate. Due to its excellent conductivity, a metal collector is typically favored. Enhancing the binding strength between the collector and the substrate as well as between the collector and the electrode material has emerged as a critical factor for enhancing the capacitance performance. In this study, a Ag film with a grass root-like structure was initially grown on a PI substrate through the surface modification and ion exchange (SMIE) process. This Ag interlocking structure contributes to strong binding between the PI substrate and Ag without compromising the mechanical properties of the Ag film. To further enhance the electrochemical properties at low scan rates, electroless-plated Cu was subsequently deposited on the Ag film to form the Cu/Ag current collector. Moreover, the Cu within the Cu/Ag current collector served as a precursor for the growth of FeOOH-Cu(OH)2 via a two-step in situ method. The resulting FeOOH-Cu(OH)2/Cu/Ag structure as a whole is binder-free. Supercapacitors employing symmetric FeOOH-Cu(OH)2/Cu/Ag structures were assembled, and their energy storage properties were investigated. The solution-based low-temperature process used in this study offers the potential for cost-effective and large-scale applications.

Self-Reconstruction of Sulfate-Terminated Copper Oxide Nanorods for Efficient and Stable 5-Hydroxymethylfurfural Electrooxidation

The electrochemical 5-hydroxymethylfurfural oxidation reaction (HMFOR) has been regarded as a viable alternative to sustainable biomass valorization. However, the transformation of the catalysts under harsh electrooxidation conditions remains controversial. Herein, we confirm the self-construction of cuprous sulfide nanosheets (Cu2S NSs) into sulfate-terminated copper oxide nanorods (CuO-SO42- NRs) during the first-cycle of the HMFOR, which achieves a near-quantitative synthesis of 2,5-furandicarboxylic acid (FDCA) with a >99.9% yield and faradaic efficiency without deactivation in 15 successive cycles. Electrochemical impedance spectroscopies confirm that the surface SO42- effectively reduces the onset potential for HMFOR, while in situ Raman spectroscopies identify a reversible transformation from CuII-O to CuIII-OOH in HMFOR. Furthermore, density functional theory calculations reveal that the surface SO42- weakens the Cu-OH bonds in CuOOH to promote the rate-determining step of its coupling with the C atom in HMF-H* resulting from HMF hydrogenation, which synergistically enhances the catalytic activity of CuO-SO42- NRs toward HMF-to-FDCA conversion.

Selective and Robust Ru Catalyst for the Aqueous Phase Aerobic Oxidation of Furfural to 2-Furoic Acid

Synthesis of 2-furoic acid (FURA) via oxidation of furfural (FAL) is vital in evolving the biorefinery concept as FURA has numerous important applications in the pharmaceuticals and optic areas. Though few works on this reaction are done, those are marred with shortcomings such as the nonrecyclability of catalyst, dilute solutions, lower yields, or use of H2O2 as an oxidizing agent. Herein, we report catalytic aqueous phase oxidation of FAL to FURA using molecular oxygen as an oxidizing agent. For the synthesis of FURA, various catalysts with a combination of metal (Pt, Pd, Ru) and supports (carbon, Al2O3) were prepared and characterized by multiple techniques (X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS)). Oxidation of FAL carried out over 5 wt % Ru/C catalyst in the presence of Na2CO3 yielded 83% of FURA at 120 °C and 15 bar oxygen pressure. The catalyst could show potential for reusability as similar activity was achieved after subjecting the spent catalyst to mild reduction treatment (150 °C). Studies on the effects of temperature, pressure, and time could help accomplish enhanced yields of FURA. Additionally, learning about the effect of base (weak/strong/solid) revealed that due to the weak basicity of Na2CO3, higher yields could be achieved by maintaining approximately a pH of 11, which is optimal for suppressing side reactions. Under the given conditions, FURA is stable (>90%) and also adsorption studies divulge that it is immediately removed from the catalyst surface, and hence higher yields could be achieved in our catalytic system. Using the initial rates methodology, an activation energy of 21.91 kJ mol-1 was derived and also a high turn over frequency (TOF) (85.9 h-1) was observed under optimized conditions.

Recent progress, trends, and new challenges in the electrochemical production of green hydrogen coupled to selective electrooxidation of 5-hydroxymethylfurfural (HMF)

The production of clean electrical energy and the correct use of waste materials are two topics that currently concern humanity. In order to face both problems, extensive work has been done on the electrolytic production of green H2 coupled with the electrooxidative upgrading of biomass platform molecules. 5-Hydroxymethylfurfural (HMF) is obtained from forest waste biomass and can be selectively oxidized to 2,5-furandicarboxylic acid (FDCA) by electrochemical pathways. FDCA is an attractive precursor to polyethylene furanoate (PEF), with the potential to replace petroleum-based polyethylene terephthalate (PET). An integrated electrochemical system can simultaneously produce H2 and FDCA at a lower energy cost than that required for electrolytic water splitting. Here, the benefits of the electrochemical production of H2 and FDCA over other production methods are presented, as well as the innovative applications of each reaction product and the advantages of carrying out both reactions in a coupled system. The recently reported progress is disclosed, through an exploration of electrocatalyst materials used in simultaneous production, including the use of nickel foams (NF) as modification substrates, noble and non-noble metals, metal non-oxides, metal oxides, spinel oxides and the introduction of oxygen vacancies. Based on the latest trends, the next challenges associated with its large-scale production are proposed for its implementation in the industrial world. This work can offer a guideline for the detailed understanding of the electrooxidation of HMF towards FDCA with the production of H2, as well as the design of advanced electrocatalysts for the sustainable use of renewable resources.

Highly Efficient Biomass Upgrading by a Ni-Cu Electrocatalyst Featuring Passivation of Water Oxidation Activity

Electricity-driven organo-oxidations have shown an increasing potential recently. However, oxygen evolution reaction (OER) is the primary competitive reaction, especially under high current densities, which leads to low Faradaic efficiency (FE) of the product and catalyst detachment from the electrode. Here, we report a bimetallic Ni-Cu electrocatalyst supported on Ni foam (Ni-Cu/NF) to passivate the OER process while the oxidation of 5-hydroxymethylfurfural (HMF) is significantly enhanced. A current density of 1000 mA cm-2 can be achieved at 1.50 V vs. reversible hydrogen electrode, and both FE and yield keep close to 100 % over a wide range of potentials. Both experimental results and theoretical calculations reveal that Cu doping impedes the OH* deprotonation to O* and hereby OER process is greatly passivated. Those instructive results provide a new approach to realizing highly efficient biomass upgrading by regulating the OER activity.

Laser Promoting Oxygen Vacancies Generation in Alloy via Mo for HMF Electrochemical Oxidation

It is well known that nickel-based catalysts have high electrocatalytic activity for the 5-hydroxymethylfurfural oxidation reaction (HMFOR), and NiOOH is the main active component. However, the price of nickel and the catalyst's lifetime still need to be solved. In this work, NiOOH containing oxygen vacancies is formed on the surface of Ni alloy by UV laser (1J85-laser). X-ray absorption fine structure (XAFS) analyses indicate an interaction between Mo and Ni, which affects the coordination environment of Ni with oxygen. The chemical valence of Ni is between 0 and 2, indicating the generation of oxygen vacancies. Density functional theory (DFT) suggests that Mo can increase the defect energy and form more oxygen vacancies. In situ Raman electrochemical spectroscopy shows that Mo can promote the formation of NiOOH, thus enhancing the HMFOR activity. The 1J85-laser electrode shows a longer electrocatalytic lifetime than Ni-laser. After 15 cycles, the conversion of HMF is 95.92%.

Scalable Synthesis of Dodecanethiol-Capped Bismuth Nanoparticles by a Solvent-Free Solid-State Grinding Method for Reduction of 4-Nitrophenol to 4-Aminophenol

Thiol-capped metal nanoparticles have two constituents: an inorganic metal and an organic molecule as a shell. Both characters are inbuilt in the structure of the metal thiolate. Herein, we have investigated bismuth dodecanethiolate as a precursor for the synthesis of dodecanethiol-capped bismuth nanoparticles (Bi NPs) by a solid-state grinding method. By using sodium borohydride and bismuth dodecanethiolate, crystalline bismuth nanoparticles are synthesized in a solvent-free environment at room temperature (24 ± 4 °C). Bi NPs are tested for catalytic activity by reducing 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with an excess of NaBH4. Dodecanethiol-capped bismuth nanoparticles exhibit an efficient reduction of 4-NP to 4-AP within 12 min. Additionally, these nanoparticles remain catalytically active for up to three cycles.

A Facile Molecular Approach to Amorphous Nickel Pnictides and Their Reconstruction to Crystalline Potassium-Intercalated γ-NiOOHx Enabling High-Performance Electrocatalytic Water Oxidation and Selective Oxidation of 5-Hydroxymethylfurfural

The low-temperature molecular precursor approach can be beneficial to conventional solid-state methods, which require high temperatures and lead to relatively large crystalline particles. Herein, a novel, single-step, room-temperature preparation of amorphous nickel pnictide (NiE; EP, As) nanomaterials is reported, starting from NaOCE(dioxane)n and NiBr2 (thf)1.5 . During application for the oxygen evolution reaction (OER), the pnictide anions leach, and both materials fully reconstruct into nickel(III/IV) oxide phases (similar to γ-NiOOH) comprising edge-sharing (NiO6 ) layers with intercalated potassium ions and a d-spacing of 7.27 Å. Remarkably, the intercalated γ-NiOOHx phases are nanocrystalline, unlike the amorphous nickel pnictide precatalysts. This unconventional reconstruction is fast and complete, which is ascribed to the amorphous nature of the nanostructured NiE precatalysts. The obtained γ-NiOOHx can effectively catalyse the OER for 100 h at a high current density (400 mA cm-2 ) and achieves outstandingly high current densities (>600 mA cm-2 ) for the selective, value-added oxidation of 5-hydroxymethylfurfural (HMF). The NiP-derived γ-NiOOHx shows a higher activity for both processes due to more available active sites. It is anticipated that the herein developed, effective, room-temperature molecular synthesis of amorphous nickel pnictide nanomaterials can be applied to other functional transition-metal pnictides.

Regulating the Electronic Structure of Ni Sites in Ni(OH)2 by Ce Doping and Cu(OH)2 Coupling to Boost 5-Hydroxymethylfurfural Oxidation Performance

Biomass is a sustainable and renewable resource that can be converted into valuable chemicals, reducing the demand for fossil energy. 5-Hydroxymethylfurfural (HMF), as an important biomass platform molecule, can be converted to high-value-added 2,5-furandicarboxylic acid (FDCA) via a green and renewable electrocatalytic oxidation route under mild reaction conditions, but efficient electrocatalysts are still lacking. Herein, we rationally fabricate a novel self-supported electrocatalyst of core-shell-structured copper hydroxide nanowires@cerium-doped nickel hydroxide nanosheets composite nanowires on a copper mesh (CuH_NWs@Ce:NiH_NSs/Cu) for electrocatalytically oxidizing HMF to FDCA. The integrated configuration of composite nanowires with rich interstitial spaces between them facilitates fast mass/electron transfer, improved conductivity, and complete exposure of active sites. The doping of Ce ions in nickel hydroxide nanosheets (NiH_NSs) and the coupling of copper hydroxide nanowires (CuH_NWs) regulate the electronic structure of the Ni active sites and optimize the adsorption strength of the active sites to the reactant, meanwhile promoting the generation of strong oxidation agents of Ni³⁺ species, thereby resulting in improved electrocatalytic activity. Consequently, the optimal CuH_NWs@Ce:NiH_NSs/Cu electrocatalyst is able to achieve a HMF conversion of 98.5% with a FDCA yield of 97.9% and a Faradaic efficiency of 98.0% at a low constant potential of 1.45 V versus reversible hydrogen electrode. Meanwhile, no activity attenuation can be found after 15 successive cycling tests. Such electrocatalytic performance suppresses most of the reported Cu-based and Ni-based electrocatalysts. This work highlights the importance of structure and doping engineering strategies for the rational fabrication of high-performance electrocatalysts for biomass upgrading.

Nickel-phytic acid hybrid for highly efficient electrocatalytic upgrading of HMF

Electrocatalytic upgrading of 5-hydroxymethylfurfural (HMF) provides a promising way to obtain both high-value-added biomass-derived chemicals and clean energy. However, development of efficient electrocatalysts for oxidizing HMF with depressed side reactions remains a challenge. Herein, we report a nickel-phytic acid hybrid (Ni-PA) using natural phytic acid as building block for highly efficient electrocatalytic oxidation of HMF to 2, 5-furandicarboxylic acid (FDCA). Due to the coordination of nickel ion and phosphate groups of phytic acid molecule, high selectivity and yield of FDCA were achieved at 1.6 V vs. RHE. Besides, Ni-PA has a higher electrochemical surface area and lower charge-transfer resistance than Cu/Fe-PA, which significantly promotes the oxidation of HMF to FDCA. This work demonstrates the potential of metal-phytic acid hybrids as effective electrocatalysts for biomass valorization.

Operando Forming of Lattice Vacancy Defect in Ultrathin Crumpled NiVW-Layered Metal Hydroxides Nanosheets for Valorization of Biomass

The 2D layered metal hydroxides (LMHs) have been developed for electrooxidation of 5-hydroxymethylfurfural (HMF). In this work, an effective strategy is proposed to tailor the electronic structure of active sites at the atomic level, which is by introducing defects into the lattice structure. As an example, a series of ultrathin crumpled ternary NiVW-LMH electrocatalysts with abundant lattice vacancies (denoted as NiVW_v -LMH) are prepared in this way. The introduction of tungsten (W) endows the catalyst with a special crumpled structure, which promotes the generation of lattice vacancies and thus exposes more unsaturated Ni activity sites. The NiVW_v -LMH displays superb performance in the electrooxidation of HMF. The Tafel slope for electrodehydrogenation of Ni²⁺ OH bond to Ni(OH)O species is 12.04 mV dec^-1 . The current density at 1.43 V versus reversible hydrogen electrode (RHE) toward the oxidation reaction of HMF reaches about 193 mA cm^-2 , which is better than most of the common electrocatalysts, with an 5.37-fold improvement compared with Ni(OH)₂ electrode. The preparation strategy demonstrates in this work can be useful for developing highly efficient electrocatalysts.

Simultaneous Oxidative Cleavage of Lignin and Reduction of Furfural via Efficient Electrocatalysis by P-Doped CoMoO4

Electrochemical oxidative lignin cleavage and coupled 2-furaldehyde reduction provide a promising approach for producing high-value added products. However, developing efficient bifunctional electrocatalysts with noble-metal-like activity still remains a challenge. Here, an efficient electrochemical strategy is reported for the selective oxidative cleavage of C_α -C_β bonds in lignin into aromatic monomers by tailoring the electronic structure through P-doped CoMoO₄ spinels (99% conversion, highest monomer selectivity of 56%). Additionally, the conversion and selectivity of 2-furaldehyde reduction to 2-methyl furan reach 87% and 73%, respectively. In situ Fourier transform infrared and density functional theory analysis reveal that an upward shift of the E_d upon P-doping leads to an increase in the antibonding level, which facilitates the C_α -C_β adsorption of the lignin model compounds, thereby enhancing the bifunctional electrocatalytic activity of the active site. This work explores the potential of a spinel as a bifunctional electrocatalyst for the oxidative cracking of lignin and the reductive conversion of small organic molecules to high-value added chemicals via P-anion modulation.

S-Species-Evoked High-Valence Ni2+ δ of the Evolved β-Ni(OH)2 Electrode for Selective Oxidation of 5-Hydroxymethylfurfural

An efficient NiS_x -modified β-Ni(OH)₂ electrode is reported for the selective oxidation reaction of 5-hydroxymethylfurfural (HMFOR) with excellent electrocatalytic 5-hydroxymethylfurfural (HMF) selectivity (99.4%), conversion (97.7%), and Faradaic efficiency (98.3%). The decoration of NiS_x will evoke high-valence Ni^{2+ δ} species in the reconstructed β-Ni(OH)₂ electrode, which are the real active species for HMFOR. The generated NiS_x /Ni(OH)O modulates the proton-coupled electron-transfer (PCET) process of HMFOR, where the electrocatalytically generated Ni(OH)O can effectively trap the protons from the CHO end in HMF to realize electron transfer. The oxygen evolution reaction (OER) competes with the HMFOR when NiS_x /Ni(OH)O continues to accumulate, to generate the NiS_x /NiO_x (OH)_y intermediate. Density functional theory (DFT) calculations and experimental results verify that the adsorption energy of HMF can be optimized through the increased NiS_x composition for more efficient capture of protons and electrons in the HMFOR.

Carbonized wood impregnated with bimetallic nanoparticles as a monolithic continuous-flow microreactor for the reduction of 4-nitrophenol

Porous monolithic microreactors show great promise in catalytic applications, but are usually based on non-renewable materials. Herein, we demonstrate a Ni/Au nanoparticle-decorated carbonized wood (Ni/Au-CW) monolithic membrane microreactor for the efficient reduction of 4-nitrophenol. The hierarchical porous wood structure supports uniformly distributed heterobimetallic Ni/Au nanoparticles. As a consequence of these two factors, both mass diffusion and electron transfer are enhanced, resulting in a superior reduction efficiency of 99.5% as the liquor flows through the optimised Ni/Au-CW membrane. The reaction mechanism was investigated by electron paramagnetic resonance spectroscopy and density functional theory calculations. The proposed attraction-repulsion mechanism facilitated by the bimetallic nanoparticles has been ascribed to the different electronegativities of Ni and Au. The Ni/Au-CW membrane exhibits excellent catalytic performance and could be applicable to other catalytic transformations.

Advances in Selective Electrochemical Oxidation of 5-Hydroxymethylfurfural to Produce High-Value Chemicals

The conversion of biomass is a favorable alternative to the fossil energy route to solve the energy crisis and environmental pollution. As one of the most versatile platform compounds, 5-hydroxymethylfural (HMF) can be transformed to various value-added chemicals via electrolysis combining with renewable energy. Here, the recent advances in electrochemical oxidation of HMF, from reaction mechanism to reactor design are reviewed. First, the reaction mechanism and pathway are summarized systematically. Second, the parameters easy to be ignored are emphasized and discussed. Then, the electrocatalysts are reviewed comprehensively for different products and the reactors are introduced. Finally, future efforts on exploring reaction mechanism, electrocatalysts, and reactor are prospected. This review provides a deeper understanding of mechanism for electrochemical oxidation of HMF, the design of electrocatalyst and reactor, which is expected to promote the economical and efficient electrochemical conversion of biomass for industrial applications.

CeO2/Ni-MOF with Synergistic Function of Enrichment and Activation: Efficient Reduction of 4-Nitrophenol Pollutant to 4-Aminophenol

The conversion of organic pollutants to value-added chemicals has been considered as a sustainable approach to solve environmental problems. However, it is still a challenge to construct a suitable heterogeneous catalyst that can synchronously achieve the enrichment and activation of organic pollutants (such as 4-nitrophenol, 4-NP). Here, an organic-inorganic hybrid catalyst (CeO₂/Ni-MOF) was successfully fabricated for efficiently reducing 4-NP to 4-aminophenol (4-AP) with water as the hydrogen source. Based on the synergistic effect of Ni-MOF (adsorption action) and CeO₂ (active sites), CeO₂/Ni-MOF could achieve a reaction rate of 1.102 μmol min^-1 mg^-1 with an ultrahigh Faraday efficiency (FE) (99.9%) and conversion (97.6%). In addition, the catalytic mechanism of 4-NP reduction over CeO₂/Ni-MOF was elaborated in depth. This work presents a new avenue for the effective reduction of pollutants and provides a new strategy for designing high-performance catalysts for rare-earth metals.

In-situ Electrochemical Transformed Cu Oxide from Cu Sulfide for Efficient Upgrading of Biomass Derived 5-Hydroxymethylfurfural in Anion Exchange Membrane Electrolyzer

The electrochemical transformation of biomass to high value-added products is attractive. Herein, Cu sulfide-mediated in-situ synthesis of Cu oxide was achieved for efficient electro-oxidation of biomass derived 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA). The copper foam-supported Cu sulfide (Cu-S/CF) was in-situ converted to Cu oxide during the electro-oxidation process. The in-situ formed Cu oxide presented high HMF conversion, FDCA yield, and faradaic efficiency in 1 m KOH with HMF concentration up to 100 mm. The oxidation of HMF on Cu oxide started with the formation of high-valence Cu species with the assistance of OH^- , which then oxidized HMF spontaneously. An anion exchange membrane (AEM) electrolyzer with Cu-S/CF as the anode was assembled to continuously produce FDCA with H₂ generation at the cathode. The AEM electrolyzer ran stably for 60 h with FDCA content higher than 85 % at a cell voltage between 1.50 and 1.60 V.

Electro-Synthesis of Organic Compounds with Heterogeneous Catalysis

Electro-organic synthesis has attracted a lot of attention in pharmaceutical science, medicinal chemistry, and future industrial applications in energy storage and conversion. To date, there has not been a detailed review on electro-organic synthesis with the strategy of heterogeneous catalysis. In this review, the most recent advances in synthesizing value-added chemicals by heterogeneous catalysis are summarized. An overview of electrocatalytic oxidation and reduction processes as well as paired electrocatalysis is provided, and the anodic oxidation of alcohols (monohydric and polyhydric), aldehydes, and amines are discussed. This review also provides in-depth insight into the cathodic reduction of carboxylates, carbon dioxide, CC, C≡C, and reductive coupling reactions. Moreover, the electrocatalytic paired electro-synthesis methods, including parallel paired, sequential divergent paired, and convergent paired electrolysis, are summarized. Additionally, the strategies developed to achieve high electrosynthesis efficiency and the associated challenges are also addressed. It is believed that electro-organic synthesis is a promising direction of organic electrochemistry, offering numerous opportunities to develop new organic reaction methods.

Heterogeneous-Interface-Enhanced Adsorption of Organic and Hydroxyl for Biomass Electrooxidation

Electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) provides an efficient way to obtain high-value-added biomass-derived chemicals. Compared with other transition metal oxides, CuO exhibits poor oxygen evolution reaction performance, leading to high Faraday efficiency for HMF oxidation. However, the weak adsorption and activation ability of CuO to OH^- species restricts its further development. Herein, the CuO-PdO heterogeneous interface is successfully constructed, resulting in an advanced onset-potential of the HMF oxidation reaction (HMFOR), a higher current density than CuO. The results of open-circuit potential, in situ infrared spectroscopy, and theoretical calculations indicate that the introduction of PdO enhances the adsorption capacity of the organic molecule. Meanwhile, the CuO-PdO heterogeneous interface promotes the adsorption and activation of OH^- species, as demonstrated by zeta potential and electrochemical measurements. This work elucidates the adsorption enhancement mechanism of heterogeneous interfaces and provides constructive guidance for designing efficient multicomponent electrocatalysts in organic electrocatalytic reactions.

In Situ Electrochemical Reconstitution of CF-CuO/CeO2 for Efficient Active Species Generation

Achievement of the intrinsic activity by in situ electrochemical reconstruction has been becoming a great challenge for designing a catalyst. Herein, an effective electrochemical strategy is proposed to reconstruct the surface of the CF-CuO/CeO₂ precursor. Under the stimulation of oxidative/reductive potential, abundant active sites were successfully generated on the surface of CF-CuO/CeO₂. Remarkably, the implantation of oxygen vacancy-rich CeO₂ synergistically optimizes the chemical composition and electronic structure of CF-CuO/CeO₂, greatly promoting the generation of active species. Systematic electrochemical experiments indicate that the superior catalytic performance of reconstructed CF-CuO/CeO₂ could be attributed to CuOOH/CeO₂ and Cu₂O/Ce₂O₃ active species, respectively. The oxidative-/reductive-activated CF-CuO/CeO₂ was further employed in a paired cell for the synergistic catalysis of hydroxymethylfurfural oxidation with 4-nitrophenol hydrogenation. As a result, nearly 100% Faraday efficiency for furandicarboxylic acid/4-aminophenol production was achieved in the paired system (-0.9 V vs Ag/AgCl, 1.5 h). Therefore, the electrochemical reconstruction via oxidative/reductive activation has been confirmed as a feasible approach to significantly excite the intrinsic activity of a catalyst.