Main-Chain Organic Frameworks with Advanced Catalytic Functionalities

Rapid yet Controlled Synthesis of 2D Covalent Organic Framework Nanocapsules as High-Performance Photocatalytic Carriers

Synthesis and assembly of two-dimensional (2D) polymeric materials present a tricky trade-off between the high reaction rate and precise morphology control. Here we report a nanoconfined synthesis of imine-based 2D covalent organic frameworks (COFs) at the interface of oil-in-water (O/W) emulsion droplets stabilized by cationic surfactants. Highly uniform nanocapsules (NCs) could be prepared without adding extra catalysts at room temperature in just 4.5 h at a yield of 86 %. The NCs have tunable average diameters of 114-565 nm and shell thicknesses of 12-63 nm, depending on the monomer and surfactant types/concentrations. Their BET-specific surface areas are up to 139.0 m2/g, mainly contributed by narrowly-distributed mesopores at ~5.0 nm and micropores at 1.4 nm at a volume ratio (V1.4/V5.0) of 1.68. The surfactant plays the role of a catalyst during the reaction and interestingly, it also regulates the formation of mesopores and their sizes. Both theoretical and experimental studies confirm that the reaction has been accelerated by two orders of magnitude at the microdroplet interface, compared to that without emulsification. The resulting NCs could be well dispersed in water for at least six weeks with little size-distribution change, and they have been demonstrated to be highly efficient nanocatalysts in application of water-based hydrogen evolution, reaching a stable hydrogen production rate at 10.2 mmol ⋅ g-1 ⋅ h-1 for 6 hours. Such microdroplet interface-confined synthesis may facilitate the future development of 2D polymeric materials for more advanced applications.

A series of polyoxometalate-based COF composites by one-pot mechanosynthesis of thioether to sulfone

An effective combination of polyoxometalates (POMs) and porous materials is a feasible method to solve the homogeneity of POMs and synthesize extremely stable POM-based catalysts. Herein, by using simple mechanochemical synthesis, we fabricated a series of composites constructed by Keggin-POMs, p-phenylenediamine (Pa-1), and 1,3,5-triformylphloroglucinol (Tp), which in situ form a stable covalent organic framework (Keggin-POMs@TpPa-1). Notably, the different Keggin-POMs@TpPa-1 composites showed different catalytic effects on thioether oxidation reaction under mild conditions. From the comparison, the catalytic effect of PW12@TpPa-1 with its added amount of 27% H3PW12O40 is superior to that of other composites, whose catalytic efficiency can reach 99%. This study provides some inspiration for designing diverse POM-modified catalysts with outstanding stability and efficiency using COFs as supports.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.

Synthesis and Applications of Porphyrin-Biomacromolecule Conjugates

With potential applications in materials and especially in light-responsive biomedicine that targets cancer tissue selectively, much research has focused on developing covalent conjugation techniques to tether porphyrinoid units to various biomacromolecules. This review details the key synthetic approaches that have been employed in the recent decades to conjugate porphyrinoids with oligonucleotides and peptides/proteins. In addition, we provide succinct discussions on the subsequent applications of such hybrid systems and also give a brief overview of the rapidly progressing field of porphyrin-antibody conjugates. Since nucleic acid and peptide systems vary in structure, connectivity, functional group availability and placement, as well as stability and solubility, tailored synthetic approaches are needed for conjugating to each of these biomacromolecule types. In terms of tethering to ONs, porphyrins are typically attached by employing bioorthogonal chemistry (e.g., using phosphoramidites) that drive solid-phase ON synthesis or by conducting post-synthesis modifications and subsequent reactions (such as amide couplings, hydrazide-carbonyl reactions, and click chemistry). In contrast, peptides and proteins are typically conjugated to porphyrinoids using their native functional groups, especially the thiol and amine side chains. However, bioorthogonal reactions (e.g., Staudinger ligations, and copper or strain promoted alkyne-azide cycloadditions) that utilize de novo introduced functional groups onto peptides/proteins have seen vigorous development, especially for site-specific peptide-porphyrin tethering. While the ON-porphyrin conjugates have largely been explored for programmed nanostructure self-assembly and artificial light-harvesting applications, there are some reports of ON-porphyrin systems targeting clinically translational applications (e.g., antimicrobial biomaterials and site-specific nucleic acid cleavage). Conjugates of porphyrins with proteinaceous moieties, on the other hand, have been predominantly used for therapeutic and diagnostic applications (especially in photodynamic therapy, photodynamic antimicrobial chemotherapy, and photothermal therapy). The advancement of the field of porphyrinoid-bioconjugation chemistry from basic academic research to more clinically targeted applications require continuous fine-tuning in terms of synthetic strategies and hence there will continue to be much exciting work on porphyrinoid-biomacromolecule conjugation.

Porous polymers from octa(amino-phenyl)silsesquioxane and metalloporphyrin as peroxidase-mimicking enzyme for malathion colorimetric sensor

Rapid and efficient pesticide detection methods are particularly important due to the growing problems of pesticide residues. Here, a new azo-based porous organic polymer, Azo(Fe)PPOP, was prepared from octa(amino-phenyl)silsesquioxane (OAPS) and iron(III) 5,10,15,20-tetrakis(4-nitrophenyl)porphyrin (FeTPP(NO₂)₄) via a simple coupling reaction without the participation of metal catalysts. The inorganic cage units of OAPS endowed Azo(Fe)PPOP a porous framework, high surface area, favorably thermal and chemical stability. In Azo(Fe)PPOP, iron(III) porphyrin units were individually isolated in a fixed location, which could effectively avoid dimerization or self-oxidation as happens as in the case of porphyrin monomers. Such a unique structure made Azo(Fe)PPOP exhibit an excellent peroxidase-like catalytic performance in the presence of H₂O₂ and 3,3',5,5'-tetramethylbenzidine (TMB). Because of these advantages, we established a selective, facile, and sensitive colorimetric platform for direct detection of malathion within a very short time (3 min) with a low detection limit (8.5 nM). In addition, the recognition mechanism between Azo(Fe)PPOP and malathion was verified using X-ray photoelectron spectroscopy spectra. The practicality of the constructed platform was further executed by the detection of the pesticide in soil and food samples.

Controlled growth of ultrafine metal nanoparticles mediated by solid supports

As a unique class of nanomaterials with a high surface-area-to-volume ratio and narrow size distribution, ultrafine metal nanoparticles (UMNPs) have shown exciting properties in many applications, particularly in the field of catalysis. Growing UMNPs in situ on solid supports enables precise control of the UMNP size, and the supports can effectively prevent the aggregation of UMNPs and maintain their high catalytic activity. In this review, we summarize the recent research progress in controlled growth of UMNPs using various solid supports and their applications in catalysis.

Rh-catalyzed highly regioselective hydroformylation to linear aldehydes by employing porous organic polymer as a ligand

In this work, we developed a new structural porous organic polymer containing biphosphoramidite unit, which can be used as a solid bidentate phosphorous ligand for rhodium-catalyzed solvent-free higher olefins hydroformylation. The resultant catalyst demonstrated unprecedently high regioselectivity to linear aldehydes and could be readily recovered for successive reuses with good stability in both catalytic activity and regioselectivity.

A porous organic polymer as a ligand was designed and prepared for Rh-catalyzed hydroformylation with outstanding activity and unprecedently high regioselectivity to linear aldehyde.

Thiophene-embedded conjugated microporous polymers for photocatalysis

“Bottom-up” embedding of thiophene derivatives into CMPs for highly efficient heterogeneous photocatalysis is reported.

Bright G-Quadruplex Nanostructures Functionalized with Porphyrin Lanterns

The intricate arrangement of numerous and closely placed chromophores on nanoscale scaffolds can lead to key photonic applications ranging from optical waveguides and antennas to signal-enhanced fluorescent sensors. In this regard, the self-assembly of dye-appended DNA sequences into programmed photonic architectures is promising. However, the dense packing of dyes can result in not only compromised DNA assembly (leading to ill-defined structures and precipitates) but also to essentially nonfluorescent systems (due to π-π aggregation). Here, we introduce a two-step "tether and mask" strategy wherein large porphyrin dyes are first attached to short G-quadruplex-forming sequences and then reacted with per-O-methylated β-cyclodextrin (PMβCD) caps, to form supramolecular synthons featuring the porphyrin fluor fixed into a masked porphyrin lantern (PL) state, due to intramolecular host-guest interactions in water. The PL-DNA sequences can then be self-assembled into cyclic architectures or unprecedented G-wires tethered with hundreds of porphyrin dyes. Importantly, despite the closely arrayed PL units (∼2 nm), the dyes behave as bright chromophores (up to 180-fold brighter than the analogues lacking the PMβCD masks). Since other self-assembling scaffolds, dyes, and host molecules can be used in this modular approach, this work lays out a general strategy for the bottom-up aqueous self-assembly of bright nanomaterials containing densely packed dyes.

Pyrrolidine-based chiral porous polymers for heterogeneous organocatalysis in water

The “bottom-up” reticulation of chiral pyrrolidine into POPs for heterogeneous organocatalysis in pure water.

Bimetallic Gold-Silver Nanoparticles Supported on Zeolitic Imidazolate Framework-8 as Highly Active Heterogenous Catalysts for Selective Oxidation of Benzyl Alcohol into Benzaldehyde

The metal-organic zeolite imidazolate framework-8 (ZIF-8) supported gold-silver bimetallic catalysts with a core-shell structure (Au@Ag/ZIF-8 and Ag@Au/ZIF-8) and cluster structure (AuAg/ZIF-8) were successfully prepared by the deposition-redispersion method. Energy dispersive X-ray spectroscopy (EDS) elemental mapping images displayed that in the Au@Ag/ZIF-8 catalyst, Ag atoms were deposited on an exposed Au surface, and core-shell structured Au@Ag particles with highly dispersed Ag as the shell were formed. Additionally, the XPS investigation at gold 4f levels and silver 3d levels indicated that the Au and Ag particles of Au@Ag/ZIF-8, Ag@Au/ZIF-8, and AuAg/ZIF-8 were in a zero valence state. Among the resultant catalysts obtained in this study, Ag@Au/ZIF-8 catalysts showed the highest catalytic activity for the selective oxidation of benzyl alcohol, followed by AuAg/ZIF-8 and Au@Ag/ZIF-8. The turnover frequency (TOF) values were in the order of Ag@Au/ZIF-8 (28.2 h-1) > AuAg/ZIF-8 (25.0 h-1) > Au@Ag/ZIF-8 (20.0 h-1) at 130 °C within 1 h under 8 bar O₂ when using THF as solvent. The catalysts of Au@Ag/ZIF-8 and Ag@Au/ZIF-8 with core⁻shell structures have higher benzaldehyde selectivities (53.0% and 53.3%) than the AuAg/ZIF-8 catalyst (35.2%) in the selective oxidation of benzyl alcohol into benzaldehyde. The effect of the solvent, reaction temperature, reaction time, and reaction pressure on benzyl alcohol conversion and benzaldehyde selectivity in benzyl alcohol selective oxidation over Au@Ag/ZIF-8, Ag@Au/ZIF-8, and AuAg/ZIF-8 were also investigated. All of the catalysts showed excellent performance at 130 °C under 8 bar O₂ within 1 h when using THF as the solvent in the selective oxidation of benzyl alcohol to benzaldehyde. Moreover, the catalysts can be easily recycled and used repetitively at least four times.

Mg-porphyrin complex doped divinylbenzene based porous organic polymers (POPs) as highly efficient heterogeneous catalysts for the conversion of CO2 to cyclic carbonates

A series of Mg-porphyrin complex doped divinylbenzene (DVB) based porous organic polymers (POPs) were systematically afforded through the method of free radical polymerization under solvothermal conditions. These POP catalysts have physical advantages of high surface areas, hierarchical pore structures, high thermal stability and spatially separated active Mg-porphyrin sites, which lead to very high efficiency in the conversion of CO₂ to cyclic carbonates with the aid of tetra-n-butyl ammonium bromide (TBAB) as a nucleophile. The effect of the doping ratio (Mg-porphyrin complex to DVB) on catalytic efficiency was studied and discussed, and the detrimental embedding effect was found. The effects of reaction temperature and pressure on catalytic activity as well as other epoxide substrates were also examined fully. More importantly, under very mild conditions (30 °C, 0.1 MPa CO₂), a considerable turnover number (TON) value of 1800 was obtained. The heterogeneous POP catalyst can be easily recovered and reused 10 times without loss of activity.

Significant Enhancement of Structural Stability of the Hyperhalophilic ADH from Haloferax volcanii via Entrapment on Metal Organic Framework Support

The use of an in situ immobilization procedure for the immobilization of hyperhalophilic alcohol dehydrogenase in a metal organic framework material is described. The easy and rapid in situ immobilization process enables retention of activity over a broad range of pH and temperature together with a decrease in the halophilicity of the enzyme. The catalytic activity of the immobilized enzyme was studied in nonaqueous solvent mixtures with the highest retention of activity in aqueous solutions of methanol and acetonitrile. The approach demonstrates that this immobilization method can be extended to hyperhalophilic enzymes with enhancements in activity and stability.

Rational Design of Catalytic Centers in Crystalline Frameworks

Crystalline frameworks including primarily metal organic frameworks (MOF) and covalent organic frameworks (COF) have received much attention in the field of heterogeneous catalysts recently. Beyond providing large surface area and spatial confinement, these crystalline frameworks can be designed to either directly act as or influence the catalytic sites at molecular level. This approach offers a unique advantage to gain deeper insights of structure-activity correlations in solid materials, leading to new guiding principles for rational design of advanced solid catalysts for potential important applications related to energy and fine chemical synthesis. In this review, recent key progress achieved in designing MOF- and COF-based molecular solid catalysts and the mechanistic understanding of the catalytic centers and associated reaction pathways are summarized. The state-of-the-art rational design of MOF- and COF-based solid catalysts in this review is grouped into seven different areas: (i) metalated linkers, (ii) metalated moieties anchored on linkers, (iii) organic moieties anchored on linkers, (iv) encapsulated single sites in pores, and (v) metal-mode-based active sites in MOFs. Along with this, some attention is paid to theoretical studies about the reaction mechanisms. Finally, technical challenges and possible solutions in applying these catalysts for practical applications are also presented.

Porous aromatic framework with mesopores as a platform for a super-efficient heterogeneous Pd-based organometallic catalysis

A strategy using a mesoporous amine-tagged porous aromatic framework (PAF70-NH₂ ) to immobilize a palladium (Pd)-based molecular catalyst has been developed. The resulting immobilized catalyst PAF70-Pd, in which the framework is entirely constructed by phenyl rings linked with stable carbon-carbon bonds, has high structural rigidity and stability. Compared with the known porous organic material immobilized Pd-based catalysts, PAF70-Pd has the highest Pd content so far. Moreover, PAF70-Pd has extremely high catalytic activity with good size selectivity and very easy recyclability in catalyzing the Suzuki-Miyaura coupling reaction. In the current system, the catalyst loading could be as low as 0.001 mol% and the TOF value could go up to 28 800 h^-1 which is far higher than those of the known porous organic material immobilized Pd-based catalysts. In order to elucidate the particularly high catalytic efficiency of PAF70-Pd, we prepared PAF1-Pd from PAF1-NH₂ for comparison. PAF1-Pd has a higher Pd content than PAF70-Pd. However, due to the absence of large enough mesopores in PAF1-NH₂ , PAF1-Pd has almost no catalytic activity under the same conditions, which definitely demonstrated that the intrinsic mesoporosity of PAF70-NH₂ plays a crucial role in the superb catalytic efficiency of PAF70-Pd. This strategy to immobilize Pd-based molecular catalysts has very good expansibility to be applied in the immobilization of different organometallic catalysts into the pores of PAFs, which also has very high potential in the chemical and pharmaceutical industry.

Chiral catalysts immobilized on achiral polymers: effect of the polymer support on the performance of the catalyst

Achiral polymeric supports can have important positive effects on the activity, stability and selectivity of supported chiral catalysts.

Tailoring the structure, pH sensitivity and catalytic performance in Suzuki–Miyaura cross-couplings of Ln/Pd MOFs based on the 1,1′-di(p-carboxybenzyl)-2,2′-diimidazole linker

Four Pd/Ln MOFs have been synthesized and tested as catalysts in Suzuki–Miyaura reactions in neat water, neat ethanol as well as water–ethanol mixtures.

Porphyrin-Based Porous Organic Frameworks as a Biomimetic Catalyst for Highly Efficient Colorimetric Immunoassay

Herein, we synthesized a cost-effective iron porphyrin (FePor)-based covalent organic polymer (COP), FePor-TFPA-COP, through an easy aromatic substitution reaction between pyrrole and tris(4-formylphenyl)amine (TFPA). The triangular pyramid-shaped, N-centric structure of TFPA facilitated the formation of FePor-TFPA-COP with three-dimensional porous structure, larger surface area, and abundant surface catalytically active sites. FePor-TFPA-COP exhibited strong intrinsic peroxidase activity toward a classical peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), in the presence of H₂O₂. Compared with horseradish peroxidase (HRP), FePor-TFPA-COP exhibited several advantages such as easy storage, high sensitivity, and prominently chemical and catalytic stability under the harsh conditions, which guaranteed the accuracy and reliability of measurements. Utilizing the excellent catalytic activity, a FePor-TFPA-COP-based colorimetric immunoassay was first established for α-fetoprotein (AFP) detection and showed high sensitivity, stability, and acceptable reproducibility. The linear response range for AFP was 5 pg/mL to 100 ng/mL and the detection limitation was 1 pg/mL. The routine provided a brilliant biomimetic catalyst to develop the nonenzyme immunoassay. More importantly, the high chemical and catalytic stability and sensitivity facilitated future practical applications under various conditions.

Preparation and exceptional adsorption performance of porous MgO derived from a metal–organic framework

Porous MgO-hex and MgO-dhp materials were synthesized by annealing metal–organic framework [NH₄][Mg(HCOO)₃], and exhibit excellent adsorption capacities toward Congo red.

Trends and challenges for microporous polymers

Recent trends and challenges for the emerging materials class of microporous polymers are reviewed. See the main article for graphical abstract image credits.

Dual role of Cu2O nanocubes as templates and networking catalysts for hollow and microporous Fe-porphyrin networks

Cu₂O nanocubes acted not only as networking catalysts but also as shape controlling templates for the synthesis of hollow and microporous Fe porphyrin networks.

Strategies for the design of porous polymers as efficient heterogeneous catalysts: from co-polymerization to self-polymerization

Porous organic polymers serve as a versatile platform for the development of highly efficient heterogeneous catalysts.

Self-Supported N-Heterocyclic Carbenes and Their Use as Organocatalysts

The study of N-heterocyclic carbenes (NHCs) as organocatalysts has proliferated in recent years, and they have been found to be useful in a variety of reactions. In an attempt to further expand their utility and to study their recyclability, we designed and synthesized a series of self-supported NHCs in which the catalytic carbene groups form part of a densely functionalized polymer backbone, and studied them as organocatalysts. Of the self-Supported NHCs examined, a benzimidazole derived polymer with flexible linkers connecting the catalytic groups was found to be the most efficient organocatalyst in a model benzoin condensation reaction, and thus it was used in a variety of such reactions, including some involving catalyst recycling. Furthermore, it was also used to catalyze a set of redox esterification reactions involving conjugated unsaturated aldehydes. In all of these reactions the catalyst afforded good yield of the desired product and its polymeric nature facilitated product purification.

The synthesis of a bifunctional copper metal organic framework and its application in the aerobic oxidation/Knoevenagel condensation sequential reaction

A novel one-pot aerobic oxidation/Knoevenagel condensation reaction system was developed employing a Cu(ii)/amine bifunctional, basic metal-organic framework (MOF) as the catalyst. The sequential aerobic alcohol oxidation/Knoevenagel condensation reaction was efficiently promoted by the Cu3TATAT MOF catalyst in the absence of basic additives. The benzylidenemalononitrile product was produced in high yield and selectivity from an inexpensive benzyl alcohol starting material under an oxygen atmosphere. The role of the basic functionality was studied to demonstrate its role in the aerobic oxidation and Knoevenagel condensation reactions. The reaction progress was monitored in order to identify the reaction intermediate and follow the accumulation of the desired product. Lastly, results showed that the yield was not significantly compromised by the reuse of a batch of catalyst, even after more than five cycles.

Porous-Hybrid Polymers as Platforms for Heterogeneous Photochemical Catalysis

A number of permanently porous polymers containing Ru(bpy)n photosensitizer or a cobaloxime complex, as a proton-reduction catalyst, were constructed via one-pot Sonogashira-Hagihara (SH) cross-coupling reactions. This process required minimal workup to access porous platforms with control over the apparent surface area, pore volume, and chemical functionality from suitable molecular building blocks (MBBs) containing the Ru or Co complexes, as rigid and multitopic nodes. The cobaloxime molecular building block, generated through in situ metalation, afforded a microporous solid that demonstrated noticeable catalytic activity toward hydrogen-evolution reaction (HER) with remarkable recyclability. We further demonstrated, in two cases, the ability to affect the excited-state lifetime of the covalently immobilized Ru(bpy)3 complex attained through deliberate utilization of the organic linkers of variable dimensions. Overall, this approach facilitates construction of tunable porous solids, with hybrid composition and pronounced chemical and physical stability, based on the well-known Ru(bpy)nor the cobaloxime complexes.