Metal-Free and Solvent-Free Oxidative Coupling of Amines to Imines with Mesoporous Carbon from Macrocyclic Compounds

Thiophene-Based Covalent Triazine Frameworks as Visible-Light-Driven Heterogeneous Photocatalysts for the Oxidative Coupling of Amines

This study reports on a metal-free Covalent Triazine Framework (CTF) incorporating bithiophene structural units (TP-CTF) with a semicrystalline structure as an efficient heterogeneous photocatalyst under visible light irradiation. The physico-chemical properties and composition of this material was confirmed via different characterization solid-state techniques, such as XRD, TGA, CO2 adsorption and FT-IR, NMR and UV-Vis spectroscopies. The compound was synthesized through a solvothermal process and was explored as a heterogeneous photocatalyst for the oxidative coupling of amines to imines under visible light irradiation. TP-CTF demonstrated outstanding photocatalytic activity, with high conversion rates and selectivity. Importantly, the material exhibited exceptional stability and recyclability, making it a strong candidate for sustainable and efficient imine synthesis. The low bandgap of TP-CTF enabled the efficient absorption of visible light, which is a notable advantage for visible-light-driven photocatalysis.

Metal-Free Nitrogen-Doped Mesoporous Carbons for the Mild and Selective Synthesis of Pyrroles from Nitroarenes via Cascade Reaction

The cascade synthesis of pyrroles from nitroarenes is an attractive alternative strategy. However, metal catalysts and relatively high temperatures cover the existing reported catalytic systems for this strategy. The development of nonmetallic heterogeneous catalytic systems for the one-pot synthesis of pyrrole from nitroarenes under mild conditions is both worthwhile and challenging. Herein, we describe an exceptionally efficient method for the synthesis of N-substituted pyrroles by the reductive coupling of nitroarenes and diketones over heterogeneous metal-free catalysts under mild conditions. Nonmetallic NC-X catalysts with high activity were prepared from the pyrolysis of well-defined ligands via simple sacrificing hard template methods. Hydrazine hydrate, formic acid, and molecular hydrogen can all be used as reducing agents in the hydrogenation/Paal-Knorr reaction sequence to efficiently synthesize various N-substituted pyrroles, including drugs and bioactive molecules. The catalytic system was featured with good tolerance to sensitive functional groups and no side reactions such as dehalogenation and aromatics hydrogenation. Hammett correlation studies have shown that the electron-donating substituents are beneficial for the one-pot synthesis of N-substituted pyrroles. The results established that the outstanding performance of the catalyst is mainly attributed to the contribution of graphitic N in the catalyst as well as the promotion effect of the mesoporous structure on the reaction.

Accurate assembly of thiophene-bridged titanium-oxo clusters with photocatalytic amine oxidation activity

Designing and synthesizing well-defined crystalline catalysts for the photocatalytic oxidative coupling of amines to imines remains a great challenge. In this work, a crystalline dumbbell-shaped titanium oxo cluster, [Ti10O6(Thdc)(Dmg)2(iPrO)22] (Ti10, Thdc = 2,5-thiophenedicarboxylic acid, Dmg = dimethylglyoxime, iPrOH = isopropanol), was constructed through a facile one-pot solvothermal strategy and treated as a catalyst for the photocatalytic oxidative coupling of amines. In this structure, Thdc serves as the horizontal bar, while the {Ti5Dmg} layers on each side act as the weight plates. The molecular structure, light absorption, and photoelectrochemical properties of Ti10 were systematically investigated. Remarkably, the inclusion of the Thdc ligand, with the assistance of the Dmg ligand, broadens the light absorption spectrum of Ti10, extending it into the visible range. Furthermore, the effective enhancement of charge transfer within the Ti10 was achieved with the successful incorporation of the Thdc ligand, as opposed to PTC-211, where terephthalic acid replaces the Thdc ligand, while maintaining consistency in other aspects of Ti10. Building on this foundation, Ti10 was employed as a heterogeneous molecular photocatalyst for the catalytic oxidative coupling reaction of benzylamine (BA), demonstrating very high conversion activity and selectivity. Our study illustrates that the inclusion of ligands derived from Thdc enhances the efficiency of charge transfer in functionalized photocatalysts, significantly influencing the performance of photocatalytic organic conversion.

Microwave-Assisted Synthesis of E-Aldimines, N-Heterocycles, and H2 by Dehydrogenative Coupling of Benzyl Alcohol and Aniline Derivatives Using CoCl2 as a Catalyst

The acceptorless dehydrogenative coupling (ADC) between alcohols and amines to produce imines has been achieved mostly by employing precious-metal-based complexes or complexes of earth-abundant metal ions with sensitive and complicated ligand systems as catalysts mostly under harsh reaction conditions. Methodologies using readily available earth-abundant metal salts as catalysts without the requirement of ligand, oxidant, or any external additives are not explored. We report an unprecedented microwave-assisted CoCl₂-catalyzed acceptorless dehydrogenative coupling of benzyl alcohol and amine for the synthesis of E-aldimines, N-heterocycles, and H₂ under mild condition, without any complicated exogenous ligand template, oxidant, or other additives. This environmentally benign methodology exhibits broad substrate scope (43 including 7 new products) with fair functional-group tolerance on the aniline ring. Detection of metal-associated intermediate by gas chromatography (GC) and HRMS, H₂ detection by GC, and kinetic isotope effect reveal the mechanism of this CoCl_2-catalyzed reaction to be via ADC. Furthermore, kinetic experiments and Hammett analysis with variation in the nature of substituents over the aniline ring reveal the insight into the reaction mechanism with different substituents.

Nitrogen-Doped Carbon as a Highly Active Metal-Free Catalyst for the Selective Oxidative Dehydrogenation of N-Heterocycles

N-heteroarenes represents one of the most important chemicals in pharmaceuticals and other bio-active molecules, which can be easily accessed from the oxidation of N-heterocycles over metal catalysts. Herein, the metal-free oxidative dehydrogenation of N-heterocycles into N-heteroarenes was developed using molecular oxygen as the terminal oxidant. The nitrogen-doped carbon materials were facilely prepared via the simple pyrolysis process using biomass (carboxymethyl cellulose sodium) and dicyandiamide as the carbon and nitrogen source, respectively, and they were discovered to be robust for the oxidative dehydrogenation of N-heterocycles into N-heteroarenes under mild conditions (80 °C under 1 bar O₂ ) with water as the green solvent. Diverse N-heterocycles including 1,2,3,4-tetrahydroisoquinolines, indolines and 1,2,3,4-tetrahydroquinoxalines were smoothly converted into N-heteroarenes with high to excellent yields (76->99 %). Superoxide radical (⋅O₂ ^- ) and hydroxyl radical (⋅OH) were probed as the reactive oxygen species for the oxidation of N-heterocycles into N-heteroarenes. More importantly, the nitrogen-doped carbon catalyst can be reused with a high stability. The method provides an environmentally friendly and economical route to access important N-hetero-aromatic commodities.

Visible-Light-Driven Oxidation of Amines to Imines in Air Catalyzed by Polyoxometalate-Tris(bipyridine)ruthenium Hybrid Compounds

The development of visible-light photocatalysts for the selective oxidative coupling of amines to imines is an area of great interest. Herein, four hybrid compounds based on polyoxometalate anions and tris(bipyridine)ruthenium cations, Ru(bpy)₃[M₆O₁₉] (M = Mo, W) 1-2, [Ru(bpy)₃]₂[Mo₈O₂₆] 3, [Ru(bpy)₃]₂[W₁₀O₃₂] 4, are prepared and characterized by X-ray diffraction (single-crystal and powder), elemental analysis, energy-dispersive X-ray spectroscopy (EDS) analysis, infrared (IR) spectroscopy, and solid diffuse reflective spectroscopy. Single-crystal structural analysis indicates that polyoxometalate anions and tris(bipyridine)ruthenium cations interact with each other through extensive hydrogen bonds in these compounds. These hybrid species with strong visible-light-harvesting abilities and suitable photocatalytic energy potentials show excellent photocatalytic activity and selectivity for the oxidation of amines to imines at room temperature in air as an oxidant. Among them, compound 1 with the [Mo₆O₁₉]^2- anion has the highest catalytic activity, which can swiftly convert >99.0% of benzylamine into N-benzylidenebenzylamine with a selectivity of 98.0% in 25 min illumination by a 10 W 445 nm light-emitting diode (LED). Its turnover frequency reaches 392 h^-1, which is not only better than the homogeneous catalyst [Ru(bpy)₃]Cl₂ but also much superior to those achieved over most of reported heterogeneous catalysts. Moreover, it shows a wide generality for various aromatic amines, accompanied by the advantages of good recyclability and stability. The photocatalytic oxidation mechanism of amines to the corresponding imines over polyoxometalate-based hybrid compounds was fully investigated.

Controlled Assembly of Ru-Containing Polyoxometalates for Photocatalytic Activity of the Primary Amine Coupling Reaction

Three Ru-induced structural interconversion polyoxometalates (POMs), Na₁₃H₅[Ru₄(H₂O)₂(Cl)₂(WO₂)₄(AsW₉O₃₃)₄]·43H₂O (1), K₅Na₉H₈[Ru₂(WO₂)₄(AsW₉O₃₃)₄]·50H₂O (2), and KNa₁₃H₁₄[(WO₂)₄(AsW₉O₃₃)₄]·34H₂O (3), were successfully synthesized and thoroughly characterized. Interconversion of structures was accomplished by changing the number of active sites for compounds 1-3. All three compounds contain one {As₄W₄₀O₁₄₀} unit, showing similar structural characteristics except for the active center number (Ru). Interestingly, compound 1 [turnover number (TON)= 486; turnover frequency (TOF)= 20 h^-1] showed highly efficient photocatalysis in achieving oxidative coupling of primary amines. Compound 2 (TON = 406, TOF = 17 h^-1) was also found to promote the oxidative coupling with relatively poor efficiency; however, compound 3 (TON = 178; TOF = 7.4 h^-1) had no obvious contribution to the coupling reaction system, and a chain of evidence indicates that the catalytic performances are strongly dependent on element contents of active sites. Furthermore, the Ru-containing POM-based photocatalysts are conveniently recyclable and reusable during the photocatalytic processes. This study demonstrates the possibility of tuning the catalytic efficiency and stability of POM-based photocatalysts by well designing and controlling their structures. The possible reaction mechanism for the photocatalysis synthesis of imine product is also proposed based on experimental studies.

Synthesis of [2+2] Schiff base macrocycles by a solvent templating strategy and halogen bonding directed assembly

Schiff base imine condensations are a useful tool for macrocycle synthesis and applications within supramolecular chemistry. Here we address the mixtures of products that can arise from template free synthesis using dicarbonylheterocycles and diamines, and look to develop metal-free template methods for selective macrocycle formation. A range of alkyl α,ω-diamines were combined with phenanthroline and pyridine heterocyclic dicarbaldehydes under standard literature conditions. The reaction conditions were modified to demonstrate a relationship between choice of solvent and product equilibria. It was observed that benzene and toluene could shift a mixture of products and unreacted starting materials to form predominantly one imine product for a number of systems. Once the macrocyclic products had been characterized in selected solvents, iodinated halogen bonding guest molecules were added to direct macrocycle assemblies using non-covalent interactions. Studies to investigate host – guest suitability and halogen bond interactions were conducted, and it was found that tetraiodoethylene had an influence on the formation of a phenanthroline based macrocycle. Proof of concept experiments were performed to show the influence of the guest molecule, tetraiodoethylene, on the macrocyclic products formed under competitive dynamic combinatorial chemistry conditions.

Binuclear Ru(III)-Containing Polyoxometalate with Efficient Photocatalytic Activity for Oxidative Coupling of Amines to Imines

A novel binuclear ruthenium-based polyoxometalate, K₆H[{Ru₂Cl(H₂O)(CH₃COO)₂}{WO(H₂O)}₂(PW₉O₃₄)₂]·14H₂O (1), was successfully synthesized by the conventional hydrothermal method. Compound 1 was well-characterized by single-crystal X-ray diffraction, X-ray powder diffraction (PXRD), infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), electrospray ionization-mass spectrometry (ESI-MS), thermogravimetric analyses (TGA), and elemental analysis. The structural unit of compound 1 contains two [A-α-PW₉O₃₄]^9- building blocks at the upper and lower positions connected by two W atoms and two Ru atoms, where the W atoms and Ru atoms are arranged in a trapezoidal arrangement and the Ru atoms are bridged by acetic acid. Furthermore, compound 1 features characteristic absorption bands in the visible region, which allows the investigation of its photocatalytic properties in visible light. Under simulated sunlight radiation (λ > 400 nm), compound 1 exhibits high photocatalytic activity and good circularity toward the oxidative coupling of amines to imines at room temperature with O₂ as the sole oxidant.

C70 Fullerene Catalyzed Photoinduced Aerobic Oxidation of Benzylamines to Imines and Aldehydes

C₇₀ fullerene catalyzed photoinduced oxidation of benzylic amines at ambient conditions has been explored here. The developed strategy's main feature includes the additive/oxidant-free conversion of benzylic amine to corresponding imine and aldehydes. The reaction manifests broad substrate scope with excellent function group leniency and is applicable up to the gram scale. Further, symmetrical secondary amines can also be synthesized from benzylic amine in a one-pot two-step process. Various experiments and density functional theory studies revealed that the current reaction involves the generation of reactive oxygen species, single electron transfer reaction, and benzyl radical formation as key steps under photocatalytic conditions.

Atomically Dispersed Vanadium Sites Anchored on N-Doped Porous Carbon for the Efficient Oxidative Coupling of Amines to Imines

Single-atom catalysts effectively integrate the respective advantages of homogeneous and heterogeneous catalysts and are a pioneering research frontier in catalysis by virtue of their maximized utility of metal atoms and distinct atomic configuration. However, development of such catalysts is still in the early stages. Herein, atomically dispersed vanadium (V) sites that are coordinated by N atoms and inlaid within N-incorporated porous carbon networks were prepared through a top-down strategy by annealing a V-containing metal-organic framework, NH₂-MIL-101(V), followed by acid etching. The resulting V-N-C-600 catalyst exhibits unexpected catalytic reactivity, selectivity, and robust stability for the direct aerobic oxidation of benzylamine to generate N-benzylidene benzylamine with molecular oxygen under mild conditions. The turnover frequency reaches 53.9 h^-1, which is much superior to those achieved over the commercial V₂O₅ and state-of-the-art non-noble metal heterogeneous catalysts reported in the literature. Kinetic analysis reveals a low activation energy barrier (37 kJ mol^-1) for the benzylamine oxidation and indicates that a carbocationic intermediate is involved in the reaction mechanism. The synergistic effect between the isolated V single-atomic sites and N-doped hierarchically porous carbon network boosts the performance of V-N-C-600. Moreover, V-N-C-600 exhibits a wide generality for the efficient synthesis of a set of symmetrical imines, unsymmetrical imines, and imine derivatives.

Cyclometalated Half-Sandwich Iridium(III) Complexes: Synthesis, Structure, and Diverse Catalytic Activity in Imine Synthesis Using Air as the Oxidant

Four air-stable cyclometalated half-sandwich iridium complexes 1-4 with C,N-donor Schiff base ligands were prepared through C-H activation in moderate-to-good yields. These complexes have been well characterized, and their exact structure was elaborated on by single-crystal X-ray analysis. The iridium(III) complexes 1-4 showed good catalytic activity in the imine synthesis under open-flask conditions (air as the oxidant) from primary amine oxidative homocoupling, secondary amine dehydrogenation, and the cross-coupling reaction of amine and alcohol. Substituents bonded on the ligands of the iridium complexes displayed little effect on the catalytic efficiency. The stability and good catalytic efficiency of the iridium catalysts, mild reaction conditions, and substrate universality showed their potential application in industrial production.

Visible-light-responsive lanthanide coordination polymers for highly efficient photocatalytic aerobic oxidation of amines and thiols

Photoinduced activation of oxygen by visible-light-responsive CPs via electron/energy transfer and its roles on aerobic oxidation of amines and thiols.

Selective oxidation of aniline contaminants via a hydrogen-abstraction pathway by Bi2·15WO6 under visible light and alkaline conditions

Conversion of aniline wastes to value-added products is always a promising method to treat aniline wastewater. In this study, a selective oxidation of aniline contaminants by Bi_2·15WO₆ was carried out under visible light and alkaline conditions. Kinetic results show that the oxidation rates of aniline increase with increasing pH values under visible light. UV-vis absorption spectra and GC-MS analysis confirm that azobenzene is the primary oxidation product with aminophenol and N,N'-diphenylhydrazine as the secondary products. The analyses from Mott-Schottky, electrochemical impedance spectroscopy (EIS), transient photocurrent and photoluminescence (PL) further indicate that OH^- promotes the separation and transfer of photogenerated electron-hole pairs on the surface of Bi_2·15WO₆, thus facilitating oxidation of aniline. Quenching experiments and electron spin resonance (ESR) analysis confirm that h⁺ is the predominant specie in the Bi_2·15WO₆ system and aniline radical cation (PhNH₂^•+) is an important intermediate. The Hammett and ΔBDE_N-H plots further reveal that e^- abstraction from aniline with the formation of PhNH₂^•+, followed by H⁺ abstraction from PhNH₂^•+ with the formation of anilino radicals (PhNH^•), is the prerequisite for the formation of N,N'-diphenylhydrazine, which is then oxidized to azobenzene via the hydrogen-abstraction pathway. This work provides a cost-effective method to selectively oxidize aniline to azobenzene.

Non-emissive RuII Polypyridyl Complexes as Efficient and Selective Photosensitizers for the Photooxidation of Benzylamines

Five new Ru^II polypyridyl complexes bearing N-(arylsulfonyl)-8-amidoquinolate ligands and three of their biscyclometalated Ir^III congeners have been prepared and employed as photocatalysts (PCs) in the photooxidation of benzylamines with O₂ . In particular, the new Ru^II complexes do not exhibit photoluminescence, rather they harvest visible light efficiently and are very stable in solution under irradiation with blue light. Their non-emissive behavior has been related to the low electrochemical energy gaps and rationalized on the basis of theoretical calculations (DFT analysis) that predict low S₀ ←T₁ energy values. Moreover, the Ru^II complexes, despite being non-emissive, display excellent activities in the selective photocatalytic transformation of benzylamines into the corresponding imines. The presence of an electron-withdrawing group (-CF3) on the arene ring of the N-(arylsulfonyl)-8-amidoquinolate ligand improves the photocatalytic activity of the corresponding photocatalyst. Furthermore, all the experimental evidence, including transient absorption spectroscopy measurements suggest that singlet oxygen is the actual oxidant. The Ir^III analogues are considerably more photosensitive and consequently less efficient photosensitizers (PSs).

Uniform Cu/chitosan beads as a green and reusable catalyst for facile synthesis of imines via oxidative coupling reaction

A nonprecious metal and biopolymer-based catalyst, Cu/chitosan beads, has been successfully prepared by using a software-controlled flow system. Uniform, spherical Cu/chitosan beads can be obtained with diameters in millimeter-scale and narrow size distribution (0.78 ± 0.04 mm). The size and morphology of the Cu/chitosan beads are reproducible due to high precision of the flow rate. In addition, the application of the Cu/chitosan beads as a green and reusable catalyst has been demonstrated using a convenient and efficient protocol for the direct synthesis of imines via the oxidative self- and cross-coupling of amines (24 examples) with moderate to excellent yields. Importantly, the beads are stable and could be reused more than ten times without loss of the catalytic performance. Furthermore, because of the bead morphology, the Cu/chitosan catalyst has greatly simplified recycling and workup procedures.

Uniform, spherical Cu/chitosan beads prepared using a software-controlled flow system as a green and conveniently recyclable catalyst for the efficient synthesis of various imines in short reaction time.

Selective Acceptorless Dehydrogenation of Primary Amines to Imines by Core-Shell Cobalt Nanoparticles

Core-shell nanocatalysts are attractive due to their versatility and stability. Here, we describe cobalt nanoparticles encapsulated within graphitic shells prepared via the pyrolysis of a cationic poly-ionic liquid (PIL) with a cobalt(II) chloride anion. The resulting material has a core-shell structure that displays excellent activity and selectivity in the self-dehydrogenation and hetero-dehydrogenation of primary amines to their corresponding imines. Furthermore, the catalyst exhibits excellent activity in the synthesis of secondary imines from substrates with various reducible functional groups (C=C, C≡C and C≡N) and amino acid derivatives.

π-Conjugated polymeric phthalocyanine for the oxidative coupling of amines

A cross-linked π-conjugated polymeric cobalt phthalocyanine material was developed by a facile, economical, scalable, and solid-phase synthesis method. In addition to being highly recyclable, this material showed greatly enhanced activity for the aerobic oxidative coupling of amines compared with a molecular catalyst before heterogenization, indicating good prospects for the material with a π-conjugated electronic character.

Effect of Building Block Transformation in Covalent Triazine-Based Frameworks for Enhanced CO2 Uptake and Metal-Free Heterogeneous Catalysis

Covalent triazine frameworks (CTFs) have provided a unique platform in functional material design for a wide range of applications. This work reports a series of new CTFs with two new heteroaromatic building blocks (pyrazole and isoxazole groups) through a building-block transformation approach aiming for carbon capture and storage (CCS) and metal-free catalysis. The CTFs were synthesized from their respective building blocks [(4,4'-(1H-pyrazole-3,5-diyl)dibenzonitrile (pyz) and 4,4'-(isoxazole-3,5-diyl)dibenzonitrile (isox))] under ionothermal conditions using ZnCl₂ . Both of the building blocks were designed by an organic transformation of an acetylacetone containing dinitrile linker to pyrazole and isoxazole groups, respectively. Due to this organic transformation, (i) linker aromatization, (ii) higher surface areas and nitrogen contents, (iii) higher aromaticity, and (iv) higher surface basicity was achieved. Due to these enhanced properties, CTFs were explored for CO₂ uptake and metal-free heterogeneous catalysis. Among all, the isox-CTF, synthesized at 400 °C, showed the highest CO₂ uptake (4.92 mmol g^-1 at 273 K and 2.98 mmol g^-1 at 298 K at 1 bar). Remarkably, these CTFs showed excellent metal-free catalytic activity for the aerobic oxidation of benzylamine at mild reaction conditions. On studying the properties of the CTFs, it was observed that organic transformations and ligand aromatization of the materials are crucial factor to tune the important parameters that influence the CO₂ uptake and the catalytic activity. Overall, this work highlights the substantial effect of designing new CTF materials by building-block organic transformations resulting in better properties for CCS applications and heterogeneous catalysis.

A Giant Mo/Ta/W Ternary Mixed-Addenda Polyoxometalate with Efficient Photocatalytic Activity for Primary Amine Coupling

The reactivity and properties of polyoxometalates (POMs) vary remarkably as a function of the kind of addenda atoms, so the design and synthesis of new mixed-addenda POMs is a promising approach for the further development of the POM-related areas. In the present work, the first Mo/Ta/W ternary mixed-addenda POM (NH₄)₄₁H₇[K₃(H₂O)₃(P₂W₁₅Ta₃O₆₂)₆(Mo₂O₄CH₃CO₂)₃(MoO₃)₂]·85H₂O (1), which is composed of 6 {P₂W₁₅Ta₃O₆₂} linked by 3 {Mo^V₂O₄(OOCCH₃)⁺} and 2 {Mo^VIO₃} via 18 novel Mo-O-Ta bridges has been synthesized. The precursor {P₂W₁₅Ta₃}, which has lower redox potential, is crucial for the formation of 1. The red-brown solid sample of 1 shows strong absorption in the visible region. The visible-light responsive charge transfer from benzylamine to 1 was observed experimentally. 1 was proved to be an efficient photocatalyst under simulated sunlight (AM 1.5G) radiation for the oxidative coupling of primary amines to imines using atmospheric O₂.

Selectivity-tunable amine aerobic oxidation catalysed by metal-free N,O-doped carbons

Herein, we present a series of N,O-doped mesoporous carbons obtained at different pyrolysis temperatures as the first metal-free catalysts which successfully switch between imine and nitrile products for amine oxidation. Systematic characterization studies and control experiments revealed that the C-O group on the surface could function as a catalytically active site for nitrile synthesis and the N-doping environment was essential.

Bifunctional Graphene-Based Metal-Free Catalysts for Oxidative Coupling of Amines

Graphene oxide (GO), an emerging material ornamented with oxygen-containing functional groups, is becoming a promising alternative for various applications. The piranha solution treatment of GO can increase oxygen-containing functional groups and result in improved graphene oxide (IGO), as well as restore the functional groups lost because of the reaction. It is found that GO can oxidize the amine to the corresponding imine in the absence of oxygen and a catalyst, and the obtained IGO even shows higher activity. In addition, the piranha solution can partially restore the reactivity of GO after the reaction. The different roles of oxygen-containing functional groups in the oxidative coupling reaction are investigated. A possible reaction mechanism for the oxidation of benzylamine to N-benzylidene benzylamine is also proposed.

Mesoporous carbon with high content of graphitic nitrogen for selective oxidation of ethylbenzene

Graphitic-nitrogen doped mesoporous carbon (accounting 85% in all nitrogen species) was easily synthesized by using acetonitrile as a precursor and SBA-15 as a hard template through a chemical vapour deposition method and exhibited a better catalytic performance than other nitrogen-doped carbon materials for selective oxidation of ethylbenzene.

Interface Engineering of Graphene-Supported Cu Nanoparticles Encapsulated by Mesoporous Silica for Size-Dependent Catalytic Oxidative Coupling of Aromatic Amines

In this study, graphene nanosheet-supported ultrafine Cu nanoparticles (NPs) encapsulated with thin mesoporous silica (Cu-GO@m-SiO₂) materials are fabricated with particle sizes ranging from 60 to 7.8 nm and are systematically investigated for the oxidative coupling of amines to produce biologically and pharmaceutically important imine derivatives. Catalytic activity remarkably increased from 76.5% conversion of benzyl amine for 60 nm NPs to 99.3% conversion and exclusive selectivity of N-benzylidene-1-phenylmethanamine for 7.8 nm NPs. The superior catalytic performance along with the outstanding catalyst stability of newly designed catalysts are attributed to the easy diffusion of organic molecules through the porous channel of mesoporous SiO₂ layers, which not only restricts the restacking of the graphene nanosheets but also prevents the sintering and leaching of metal NPs to an extreme extent through the nanoconfinement effect. Density functional theory calculations were performed to shed light on the reaction mechanism and to give insight into the trend of catalytic activity observed. The computed activation barriers of all elementary steps are very high on terrace Cu(111) sites, which dominate the large-sized Cu NPs, but are significantly lower on step sites, which are presented in higher density on smaller-sized Cu NPs and could explain the higher activity of smaller Cu-GO@m-SiO₂ samples. In particular, the activation barrier for the elementary coupling reaction is reduced from 139 kJ/mol on flat terrace Cu(111) sites to the feasible value of 94 kJ/mol at step sites, demonstrating the crucial role of the step site in facilitating the formation of secondary imine products.