Intermetallic GaPd2 Nanoparticles on SiO2 for Low-Pressure CO2 Hydrogenation to Methanol: Catalytic Performance and In Situ Characterization

Recent advances in bifunctional synthesis gas conversion to chemicals and fuels with a comparison to monofunctional processes

In order to meet the climate goals of the Paris Agreement and limit the potentially catastrophic consequences of climate change, we must move away from the use of fossil feedstocks for the production of chemicals and fuels. The conversion of synthesis gas (a mixture of hydrogen, carbon monoxide and/or carbon dioxide) can contribute to this. Several reactions allow to convert synthesis gas to oxygenates (such as methanol), olefins or waxes. In a consecutive step, these products can be further converted into chemicals, such as dimethyl ether, short olefins, or aromatics. Alternatively, fuels like gasoline, diesel, or kerosene can be produced. These two different steps can be combined using bifunctional catalysis for direct conversion of synthesis gas to chemicals and fuels. The synergistic effects of combining two different catalysts are discussed in terms of activity and selectivity and compared to processes based on consecutive reaction with single conversion steps. We found that bifunctional catalysis can be a strong tool for the highly selective production of dimethyl ether and gasoline with high octane numbers. In terms of selectivity bifunctional catalysis for short olefins or aromatics struggles to compete with processes consisting of single catalytic conversion steps.

In-Situ Characterization Techniques for Mechanism Studies of CO2 Hydrogenation

The paramount concerns of global warming, fossil fuel depletion, and energy crises have prompted the need of hydrocarbons productions via CO2 conversion. In order to achieve global carbon neutrality, much attention needs to be diverted towards CO2 management. Catalytic hydrogenation of CO2 is an exciting opportunity to curb the increasing CO2 and produce value-added products. However, the comprehensive understanding of CO2 hydrogenation is still a matter of discussion due to its complex reaction mechanism and involvement of various species. This review comprehensively discusses three processes: reverse water gas shift (RWGS) reaction, modified Fischer Tropsch synthesis (MFTS), and methanol-mediated route (MeOH) for CO2 hydrogenation to hydrocarbons. Along with analysing the reaction pathways, it is also very important to understand the real-time evolvement of catalytic process and reaction intermediates by employing in-situ characterization techniques under actual reaction conditions. Subsequently, in second part of this review, we provided a systematic analysis of advancements in in-situ techniques aimed to monitor the evolution of catalysts during CO2 reduction process. The section also highlights the key components of in-situ cells, their working principles, and applications in identifying reaction mechanisms for CO2 hydrogenation. Finally, by reviewing respective achievements in the field, we identify key gaps and present some future directions for CO2 hydrogenation and in-situ studies.

Structure and Role of a Ga-Promoter in Ni-Based Catalysts for the Selective Hydrogenation of CO2 to Methanol

Supported, bimetallic catalysts have shown great promise for the selective hydrogenation of CO2 to methanol. In this study, we decipher the catalytically active structure of Ni-Ga-based catalysts. To this end, model Ni-Ga-based catalysts, with varying Ni:Ga ratios, were prepared by a surface organometallic chemistry approach. In situ differential pair distribution function (d-PDF) analysis revealed that catalyst activation in H2 leads to the formation of nanoparticles based on a Ni-Ga face-centered cubic (fcc) alloy along with a small quantity of GaOx. Structure refinements of the d-PDF data enabled us to determine the amount of both alloyed Ga and GaOx species. In situ X-ray absorption spectroscopy experiments confirmed the presence of alloyed Ga and GaOx and indicated that alloying with Ga affects the electronic structure of metallic Ni (viz., Niδ-). Both the Ni:Ga ratio in the alloy and the quantity of GaOx are found to minimize methanation and to determine the methanol formation rate and the resulting methanol selectivity. The highest formation rate and methanol selectivity are found for a Ni-Ga alloy having a Ni:Ga ratio of ∼75:25 along with a small quantity of oxidized Ga species (0.14 molNi-1). Furthermore, operando infrared spectroscopy experiments indicate that GaOx species play a role in the stabilization of formate surface intermediates, which are subsequently further hydrogenated to methoxy species and ultimately to methanol. Notably, operando XAS shows that alloying between Ni and Ga is maintained under reaction conditions and is key to attaining a high methanol selectivity (by minimizing CO and CH4 formation), while oxidized Ga species enhance the methanol formation rate.

Nanomaterials as catalysts for CO2 transformation into value-added products: A review

Carbon dioxide (CO₂₎ is the most important greenhouse gas (GHG), accounting for 76% of all GHG emissions. The atmospheric CO₂ concentration has increased from 280 ppm in the pre-industrial era to about 418 ppm, and is projected to reach 570 ppm by the end of the 21^st century. In addition to reducing CO₂ emissions from anthropogenic activities, strategies to adequately address climate change must include CO₂ capture. To promote circular economy, captured CO₂ should be converted to value-added materials such as fuels and other chemical feedstock. Due to their tunable chemistry (which allows them to be selective) and high surface area (which allows them to be efficient), engineered nanomaterials are promising for CO₂ capturing and/or transformation. This work critically reviewed the application of nanomaterials for the transformation of CO₂ into various fuels, like formic acid, carbon monoxide, methanol, and ethanol. We discussed the literature on the use of metal-based nanomaterials, inorganic/organic nanocomposites, as well as other routes suitable for CO₂ conversion such as the electrochemical, non-thermal plasma, and hydrogenation routes. The characteristics, steps, mechanisms, and challenges associated with the different transformation technologies were also discussed. Finally, we presented a section on the outlook of the field, which includes recommendations for how to continue to advance the use of nanotechnology for conversion of CO₂ to fuels.

Atomically Thick Oxide Overcoating Stimulates Low-Temperature Reactive Metal-Support Interactions for Enhanced Catalysis

Reactive metal-support interactions (RMSIs) induce the formation of bimetallic alloys and offer an effective way to tune the electronic and geometric properties of metal sites for advanced catalysis. However, RMSIs often require high-temperature reductions (>500 °C), which significantly limits the tuning of bimetallic compositional varieties. Here, we report that an atomically thick Ga₂O₃ coating of Pd nanoparticles enables the initiation of RMSIs at a much lower temperature of ∼250 °C. State-of-the-art microscopic and in situ spectroscopic studies disclose that low-temperature RMSIs initiate the formation of rarely reported Ga-rich PdGa alloy phases, distinct from the Pd₂Ga phase formed in traditional Pd/Ga₂O₃ catalysts after high-temperature reduction. In the CO₂ hydrogenation reaction, the Ga-rich alloy phases impressively boost the formation of methanol and dimethyl ether ∼5 times higher than that of Pd/Ga₂O₃. In situ infrared spectroscopy reveals that the Ga-rich phases greatly favor formate formation as well as its subsequent hydrogenation, thus leading to high productivity.

Understanding the Degradation Mechanisms of Pt Electrocatalysts in PEMFCs by Combining 2D and 3D Identical Location TEM

The evolution of Pt nanoparticles in proton-exchanged membrane fuel cells is monitored before and after electrochemical potential cycling, using 2D and 3D identical location aberration-corrected transmission electron microscopy. This work demonstrates that 2D images might be a challenge to interpret due to the 3D nature of the carbon support. Thus, it is critical to combine both 2D and 3D observations to be able to fully understand the mechanisms associated with the durability of Pt catalyst nanoparticles. In particular, this investigation reveals that the mechanism of particle migration followed by coalescence is operative mainly across short distances (<0.5 nm). This work also shows that new Pt particles appear on the carbon support, as the result of Pt dissolution, followed by the formation of clusters, which grow by Ostwald ripening. This mechanism of Ostwald ripening is also responsible for changes in shape and particle growth, which later may result in coalescence.

The Promoting Role of Ni on In2O3 for CO2 Hydrogenation to Methanol

Ni-promoted indium oxide (In₂O₃) is a promising catalyst for the selective hydrogenation of CO₂ to CH₃OH, but the nature of the active Ni sites remains unknown. By employing density functional theory and microkinetic modeling, we elucidate the promoting role of Ni in In₂O₃-catalyzed CO₂ hydrogenation. Three representative models have been investigated: (i) a single Ni atom doped in the In₂O₃(111) surface, (ii) a Ni atom adsorbed on In₂O₃(111), and (iii) a small cluster of eight Ni atoms adsorbed on In₂O₃(111). Genetic algorithms (GAs) are used to identify the optimum structure of the Ni₈ clusters on the In₂O₃ surface. Compared to the pristine In₂O₃(111) surface, the Ni₈-cluster model offers a lower overall barrier to oxygen vacancy formation, whereas, on both single-atom models, higher overall barriers are found. Microkinetic simulations reveal that only the supported Ni₈ cluster can lead to high methanol selectivity, whereas single Ni atoms either doped in or adsorbed on the In₂O₃ surface mainly catalyze CO formation. Hydride species obtained by facile H₂ dissociation on the Ni₈ cluster are involved in the hydrogenation of adsorbed CO₂ to formate intermediates and methanol. At higher temperatures, the decreasing hydride coverage shifts the selectivity to CO. On the Ni₈-cluster model, the formation of methane is inhibited by high barriers associated with either direct or H-assisted CO activation. A comparison with a smaller Ni₆ cluster also obtained with GAs exhibits similar barriers for key rate-limiting steps for the formation of CO, CH₄, and CH₃OH. Further microkinetic simulations show that this model also has appreciable selectivity to methanol at low temperatures. The formation of CO over single Ni atoms either doped in or adsorbed on the In₂O₃ surface takes place via a redox pathway involving the formation of oxygen vacancies and direct CO₂ dissociation.

Cooperative Catalysis of Vibrationally Excited CO2 and Alloy Catalyst Breaks the Thermodynamic Equilibrium Limitation

Using nonthermal plasma (NTP) to promote CO₂ hydrogenation is one of the most promising approaches that overcome the limitations of conventional thermal catalysis. However, the catalytic surface reaction dynamics of NTP-activated species are still under debate. The NTP-activated CO₂ hydrogenation was investigated in Pd₂Ga/SiO₂ alloy catalysts and compared to thermal conditions. Although both thermal and NTP conditions showed close to 100% CO selectivity, it is worth emphasizing that when activated by NTP, CO₂ conversion not only improves more than 2-fold under thermal conditions but also breaks the thermodynamic equilibrium limitation. Mechanistic insights into NTP-activated species and alloy catalyst surface were investigated by using in situ transmission infrared spectroscopy, where catalyst surface species were identified during NTP irradiation. Moreover, in in situ X-ray absorption fine-structure analysis under reaction conditions, the catalyst under NTP conditions not only did not undergo restructuring affecting CO₂ hydrogenation but also could clearly rule out catalyst activation by heating. In situ characterizations of the catalysts during CO₂ hydrogenation depict that vibrationally excited CO₂ significantly enhances the catalytic reaction. The agreement of approaches combining experimental studies and density functional theory (DFT) calculations substantiates that vibrationally excited CO₂ reacts directly with hydrogen adsorbed on Pd sites while accelerating formate formation due to neighboring Ga sites. Moreover, DFT analysis deduces the key reaction pathway that the decomposition of monodentate formate is promoted by plasma-activated hydrogen species. This work enables the high designability of CO₂ hydrogenation catalysts toward value-added chemicals based on the electrification of chemical processes via NTP.

Promoting effects of indium doped Cu/CeO2 catalysts on CO2 hydrogenation to methanol

Combining catalyst modification by indium doping and chemometric optimization, the Cu/CeO2 system showed high selectivity to methanol (99.3%) with no CO formation during CO2 hydrogenation.

Mechanistic and multiscale aspects of thermo-catalytic CO2 conversion to C1 products

The increasing environmental concerns due to anthropogenic CO2 emissions have called for an alternate sustainable source to fulfill rising chemical and energy demands and reduce environmental problems. The thermo-catalytic activation and conversion of abundantly available CO2, a thermodynamically stable and kinetically inert molecule, can significantly pave the way to sustainably produce chemicals and fuels and mitigate the additional CO2 load. This can be done through comprehensive knowledge and understanding of catalyst behavior, reaction kinetics, and reactor design. This review aims to catalog and summarize the advances in the experimental and theoretical approaches for CO2 activation and conversion to C1 products via heterogeneous catalytic routes. To this aim, we analyze the current literature works describing experimental analyses (e.g., catalyst characterization and kinetics measurement) as well as computational studies (e.g., microkinetic modeling and first-principles calculations). The catalytic reactions of CO2 activation and conversion reviewed in detail are: (i) reverse water-gas shift (RWGS), (ii) CO2 methanation, (iii) CO2 hydrogenation to methanol, and (iv) dry reforming of methane (DRM). This review is divided into six sections. The first section provides an overview of the energy and environmental problems of our society, in which promising strategies and possible pathways to utilize anthropogenic CO2 are highlighted. In the second section, the discussion follows with the description of materials and mechanisms of the available thermo-catalytic processes for CO2 utilization. In the third section, the process of catalyst deactivation by coking is presented, and possible solutions to the problem are recommended based on experimental and theoretical literature works. In the fourth section, kinetic models are reviewed. In the fifth section, reaction technologies associated with the conversion of CO2 are described, and, finally, in the sixth section, concluding remarks and future directions are provided.

Ni-In Synergy in CO2 Hydrogenation to Methanol

Indium oxide (In2O3) is a promising catalyst for selective CH3OH synthesis from CO2 but displays insufficient activity at low reaction temperatures. By screening a range of promoters (Co, Ni, Cu, and Pd) in combination with In2O3 using flame spray pyrolysis (FSP) synthesis, Ni is identified as the most suitable first-row transition-metal promoter with similar performance as Pd-In2O3. NiO-In2O3 was optimized by varying the Ni/In ratio using FSP. The resulting catalysts including In2O3 and NiO end members have similar high specific surface areas and morphology. The main products of CO2 hydrogenation are CH3OH and CO with CH4 being only observed at high NiO loading (≥75 wt %). The highest CH3OH rate (∼0.25 gMeOH/(gcat h), 250 °C, and 30 bar) is obtained for a NiO loading of 6 wt %. Characterization of the as-prepared catalysts reveals a strong interaction between Ni cations and In2O3 at low NiO loading (≤6 wt %). H2-TPR points to a higher surface density of oxygen vacancy (Ov) due to Ni substitution. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and electron paramagnetic resonance analysis of the used catalysts suggest that Ni cations can be reduced to Ni as single atoms and very small clusters during CO2 hydrogenation. Supportive density functional theory calculations indicate that Ni promotion of CH3OH synthesis from CO2 is mainly due to low-barrier H2 dissociation on the reduced Ni surface species, facilitating hydrogenation of adsorbed CO2 on Ov.

An Investigation into the Bulk and Surface Phase Transformations of Bimetallic Pd-In/Al2O3 Catalyst during Reductive and Oxidative Treatments In Situ

A series of oxidative treatments of PdIn-supported intermetallic nanoparticles at different temperatures were performed. The bulk and surface structure of catalyst during phase transformation was investigated by bulk- and surface-sensitive techniques (in situ XAFS, DRIFTS of adsorbed CO). It was found that comparison of palladium and indium fractions in bulk and on the surface suggests the formation of a «core-shell» structure. According to obtained results, the core consists of In-depleted intermetallic compound or inhomogeneous bimetallic phase with the inner core of metallic Pd, when a mixture of indium oxide, metallic palladium and small part of PdIn is present on the surface.

Integrated catalytic insights into methanol production: Sustainable framework for CO2 conversion

A continuous increase in the amount of greenhouse gases (GHGs) is causing serious threats to the environment and life on the earth, and CO₂ is one of the major candidates. Reducing the excess CO₂ by converting into industrial products could be beneficial for the environment and also boost up industrial growth. In particular, the conversion of CO₂ into methanol is very beneficial as it is cheaper to produce from biomass, less inflammable, and advantageous to many industries. Application of various plants, algae, and microbial enzymes to recycle the CO₂ and using these enzymes separately along with CO₂-phillic materials and chemicals can be a sustainable solution to reduce the global carbon footprint. Materials such as MOFs, porphyrins, and nanomaterials are also used widely for CO₂ absorption and conversion into methanol. Thus, a combination of enzymes and materials which convert the CO₂ into methanol could energize the CO₂ utilization. The CO₂ to methanol conversion utilizes carbon better than the conventional syngas and the reaction yields fewer by-products. The methanol produced can further be utilized as a clean-burning fuel, in pharmaceuticals, automobiles and as a general solvent in various industries etc. This makes methanol an ideal fuel in comparison to the conventional petroleum-based ones and it is advantageous for a safer and cleaner environment. In this review article, various aspects of the circular economy with the present scenario of environmental crisis will also be considered for large-scale sustainable biorefinery of methanol production from atmospheric CO₂.

Silica-Supported PdGa Nanoparticles: Metal Synergy for Highly Active and Selective CO2-to-CH3OH Hydrogenation

The direct conversion of CO₂ to CH₃OH represents an appealing strategy for the mitigation of anthropogenic CO₂ emissions. Here, we report that small, narrowly distributed alloyed PdGa nanoparticles, prepared via surface organometallic chemistry from silica-supported Ga^III isolated sites, selectively catalyze the hydrogenation of CO₂ to CH₃OH. At 230 °C and 25 bar, high activity (22.3 mol_MeOH mol_Pd ^-1 h^-1) and selectivity for CH₃OH/DME (81%) are observed, while the corresponding silica-supported Pd nanoparticles show low activity and selectivity. X-ray absorption spectroscopy (XAS), IR, NMR, and scanning transmission electron microscopy-energy-dispersive X-ray provide evidence for alloying in the as-synthesized material. In situ XAS reveals that there is a dynamic dealloying/realloying process, through Ga redox, while operando diffuse reflectance infrared Fourier transform spectroscopy demonstrates that, while both methoxy and formate species are observed in reaction conditions, the relative concentrations are inversely proportional, as the chemical potential of the gas phase is modulated. High CH₃OH selectivities, across a broad range of conversions, are observed, showing that CO formation is suppressed for this catalyst, in contrast to reported Pd catalysts.

Synthesis of Ni2P/CdS and Pt/TiO2 nanocomposite for photoreduction of CO2 into methanol

It is a great challenge to convert thermochemically stable CO₂ into value-added products such as CH₄, CH₃OH, CO via utilizing solar energy. It is also a difficult task to develop an efficient catalyst for the reduction of CO₂. We have designed and synthesized noble metal-free photocatalytic nanostructure Ni₂P/CdS and Pt/TiO₂ for conversion of CO₂ to methanol in the presence of sacrificial donor triethylamine (TEA) and hydrogen peroxide. The synthesised catalysts physicochemical properties were studied by using several spectroscopic techniques like; XRD, UV-DRS, XPS, TEM, SEM and PL. Quantification of methanol by GC–MS showed encouraging results of 1424.8 and 2843 μmol g⁻¹ of catalyst for Pt/TiO₂ and 5 wt% Ni₂P/CdS composites, respectively. Thus, Ni₂P/CdS is a promising catalyst with higher productivity and significant selectivity than in-vogue catalysts.

Towards the Large-Scale Electrochemical Reduction of Carbon Dioxide

The severe increase in the CO2 concentration is a causative factor of global warming, which accelerates the destruction of ecosystems. The massive utilization of CO2 for value-added chemical production is a key to commercialization to guarantee both economic feasibility and negative carbon emission. Although the electrochemical reduction of CO2 is one of the most promising technologies, there are remaining challenges for large-scale production. Herein, an overview of these limitations is provided in terms of devices, processes, and catalysts. Further, the economic feasibility of the technology is described in terms of individual processes such as reactions and separation. Additionally, for the practical implementation of the electrochemical CO2 conversion technology, stable electrocatalytic performances need to be addressed in terms of current density, Faradaic efficiency, and overpotential. Hence, the present review also covers the known degradation behaviors and mechanisms of electrocatalysts and electrodes during electrolysis. Furthermore, strategic approaches for overcoming the stability issues are introduced based on recent reports from various research areas involved in the electrocatalytic conversion.

First-principles microkinetic simulations revealing the scaling relations and structure sensitivity of CO2 hydrogenation to C1 & C2 oxygenates on Pd surfaces

CO₂ hydrogenation to alcohols and other oxygenates on Pd(211) and Pd(111) surfaces was studied by microkinetic modelling. Energy scaling relations on two surfaces were established. Activity plots as a function of reaction conditions were identified.

CO2 Reduction to Methanol in the Liquid Phase: A Review

Excessive carbon dioxide (CO₂ ) emissions have been subject to extensive attention globally, since an enhanced greenhouse effect (global warming) owing to a high CO₂ concentration in the atmosphere could lead to severe climate change. The use of solar energy and other renewable energy to produce low-cost hydrogen, which is used to reduce CO₂ to produce bulk chemicals such as methanol, is a sustainable strategy for reducing carbon dioxide emissions and carbon resources. CO₂ conversion into methanol is exothermic, so that low temperature and high pressure are favorable for methanol formation. CO₂ is usually captured and recovered in the liquid phase. Herein, the emerging technologies for the hydrogenation of CO₂ to methanol in the condensed phase are reviewed. The development of homogeneous and heterogeneous catalysts for this important hydrogenation reaction is summarized. Finally, mechanistic insight on CO₂ 's conversion into methanol over different catalysts is discussed by taking the available reaction pathways into account.

Novel Heterogeneous Catalysts for CO2 Hydrogenation to Liquid Fuels

Carbon dioxide (CO₂) hydrogenation to liquid fuels including gasoline, jet fuel, diesel, methanol, ethanol, and other higher alcohols via heterogeneous catalysis, using renewable energy, not only effectively alleviates environmental problems caused by massive CO₂ emissions, but also reduces our excessive dependence on fossil fuels. In this Outlook, we review the latest development in the design of novel and very promising heterogeneous catalysts for direct CO₂ hydrogenation to methanol, liquid hydrocarbons, and higher alcohols. Compared with methanol production, the synthesis of products with two or more carbons (C₂₊) faces greater challenges. Highly efficient synthesis of C₂₊ products from CO₂ hydrogenation can be achieved by a reaction coupling strategy that first converts CO₂ to carbon monoxide or methanol and then conducts a C-C coupling reaction over a bifunctional/multifunctional catalyst. Apart from the catalytic performance, unique catalyst design ideas, and structure-performance relationship, we also discuss current challenges in catalyst development and perspectives for industrial applications.

The impact of synthetic method on the catalytic application of intermetallic nanoparticles

Intermetallic alloy nanocrystals have emerged as a promising next generation of nanocatalyst, largely due to their promise of surface tunability. Atomic control of the geometric and electronic structure of the nanoparticle surface offers a precise command of the catalytic surface, with the potential for creating homogeneous active sites that extend over the entire nanoparticle. Realizing this promise, however, has been limited by synthetic difficulties, imparted by differences in parent metal crystal structure, reduction potential, and atomic size. Further, little attention has been paid to the impact of synthetic method on catalytic application. In this review, we seek to connect the two, organizing the current synthesis methods and catalytic scope of intermetallic nanoparticles and suggesting areas where more work is needed. Such analysis should help to guide future intermetallic nanoparticle development, with the ultimate goal of generating precisely controlled nanocatalysts tailored to catalysis.

Methanol Synthesis at a Wide Range of H2 /CO2 Ratios over a Rh-In Bimetallic Catalyst

There is increasing interest in capturing H₂ generated from renewables with CO₂ to produce methanol. However, renewable hydrogen production is expensive and in limited quantity compared to CO₂ . Excess CO₂ and limited H₂ in the feedstock gas is not favorable for CO₂ hydrogenation to methanol, causing low activity and poor methanol selectivity. Now, a class of Rh-In catalysts with optimal adsorption properties to the intermediates of methanol production is presented. The Rh-In catalyst can effectively catalyze methanol synthesis but inhibit the reverse water-gas shift reaction under H₂ -deficient gas flow and shows the best competitive methanol productivity under industrially applicable conditions in comparison with reported values. This work demonstrates a strong potential of Rh-In bimetallic composition, from which a convenient methanol synthesis based on flexible feedstock compositions (such as H₂ /CO₂ from biomass derivatives) with lower energy cost can be established.

Intermetallic compounds in catalysis - a versatile class of materials meets interesting challenges

The large and vivid field of intermetallic compounds in catalysis is reviewed to identify necessities, strategies and new developments making use of the advantageous catalytic properties of intermetallic compounds. Since recent reviews summarizing contributions in heterogeneous catalysis as well as electrocatalysis are available, this contribution is not aiming at a comprehensive literature review. To introduce the field, first the interesting nature of intermetallic compounds is elaborated - including possibilities as well as requirements to address catalytic questions. Subsequently, this review focuses on exciting developments and example success stories of intermetallic compounds in catalysis. Since many of these are based on recent advances in synthesis, a short overview of synthesis and characterisation is included. Thus, this contribution aims to be an introduction to the newcomer as well as being helpful to the experienced researcher by summarising the different approaches. Selected examples from literature are chosen to illustrate the versatility of intermetallic compounds in heterogeneous catalysis where the emphasis is on developments since the last comprehensive review in the field.

Progress and Perspective for In Situ Studies of CO2 Reduction

CO₂ conversion to chemical fuels through photoreduction, electroreduction, or thermoreduction is considered as one of the most effective methods to solve environmental pollution and energy shortage problems. However, recent studies show that the involved catalysts may undergo continuous reconstruction under realistic working conditions, which unfortunately causes controversial results concerning the active sites and reaction mechanism of CO₂ reduction. Thus, it is necessary, while challenging, to monitor in real time the dynamic evolution of the catalysts and reaction intermediates by in situ techniques under experimental conditions. In this Perspective, we start with the working principle and detection modes of various in situ characterization techniques. Subsequently, we systematically summarize the recent developments of in situ studies on probing the catalyst evolution during the CO₂ reduction process. We further focus on the progress of in situ studies in monitoring the reaction intermediates and catalytic products, in which we also highlight how the theoretical calculations are combined to reveal the reaction mechanism in detail. Finally, based on the achievements in the representative studies, we present some prospects and suggestions for in situ studies of CO₂ reduction in the future.

Silica accelerates the selective hydrogenation of CO2 to methanol on cobalt catalysts

The reaction pathways on supported catalysts can be tuned by optimizing the catalyst structures, which helps the development of efficient catalysts. Such design is particularly desired for CO₂ hydrogenation, which is characterized by complex pathways and multiple products. Here, we report an investigation of supported cobalt, which is known for its hydrocarbon production and ability to turn into a selective catalyst for methanol synthesis in CO₂ hydrogenation which exhibits good activity and stability. The crucial technique is to use the silica, acting as a support and ligand, to modify the cobalt species via Co‒O‒SiO_n linkages, which favor the reactivity of spectroscopically identified *CH₃O intermediates, that more readily undergo hydrogenation to methanol than the C‒O dissociation associated with hydrocarbon formation. Cobalt catalysts in this class offer appealing opportunities for optimizing selectivity in CO₂ hydrogenation and producing high-grade methanol. By identifying this function of silica, we provide support for rationally controlling these reaction pathways.

The hydrogenation of CO₂ into valuable chemicals is greatly demanded, but suffers from complex product distribution. Here, the authors reported that, as a support and ligand, silica boosts cobalt catalysts to selectively hydrogenate CO₂ into the desired methanol product.

On the conversion of CO2 to value added products over composite PdZn and H-ZSM-5 catalysts: excess Zn over Pd, a compromise or a penalty?

Zn was found to possess a dual role in composite PdZn–H-ZSM-5 catalysts for CO₂ hydrogenation reactions: it promotes methanol formation when alloyed with Pd, but inhibits hydrocarbon formation by ion exchange with Brønsted acid sites in H-ZSM-5.

The nature of the active sites of Pd–Ga catalysts in the hydrogenation of CO2 to methanol

The Pd/Ga ratio influences the phases formed during catalysis. The best catalyst necessitates the formation of Pd–Ga intermetallic compounds and also a low content of Ga₂O₃, whose excess tend to block surface sites.

State of the art and perspectives in heterogeneous catalysis of CO2 hydrogenation to methanol

The ever-increasing amount of anthropogenic carbon dioxide (CO₂) emissions has resulted in great environmental impacts, the heterogeneous catalysis of CO₂ hydrogenation to methanol is of great significance.

CO2 hydrogenation to high-value products via heterogeneous catalysis

Recently, carbon dioxide capture and conversion, along with hydrogen from renewable resources, provide an alternative approach to synthesis of useful fuels and chemicals. People are increasingly interested in developing innovative carbon dioxide hydrogenation catalysts, and the pace of progress in this area is accelerating. Accordingly, this perspective presents current state of the art and outlook in synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols through two leading hydrogenation mechanisms: methanol reaction and Fischer-Tropsch based carbon dioxide hydrogenation. The future research directions for developing new heterogeneous catalysts with transformational technologies, including 3D printing and artificial intelligence, are provided.

Carbon dioxide (CO₂) capture and conversion provide an alternative approach to synthesis of useful fuels and chemicals. Here, Ye et al. give a comprehensive perspective on the current state of the art and outlook of CO₂ catalytic hydrogenation to the synthesis of light olefins, dimethyl ether, liquid fuels, and alcohols.

Methanol Synthesis from CO2: A Review of the Latest Developments in Heterogeneous Catalysis

Technological approaches which enable the effective utilization of CO2 for manufacturing value-added chemicals and fuels can help to solve environmental problems derived from large CO2 emissions associated with the use of fossil fuels. One of the most interesting products that can be synthesized from CO2 is methanol, since it is an industrial commodity used in several chemical products and also an efficient transportation fuel. In this review, we highlight the recent advances in the development of heterogeneous catalysts and processes for the direct hydrogenation of CO2 to methanol. The main efforts focused on the improvement of conventional Cu/ZnO based catalysts and the development of new catalytic systems targeting the specific needs for CO2 to methanol reactions (unfavourable thermodynamics, production of high amount of water and high methanol selectivity under high or full CO2 conversion). Major studies on the development of active and selective catalysts based on thermodynamics, mechanisms, nano-synthesis and catalyst design (active phase, promoters, supports, etc.) are highlighted in this review. Finally, a summary concerning future perspectives on the research and development of efficient heterogeneous catalysts for methanol synthesis from CO2 will be presented.