Recent Advances in the Catalytic Synthesis of 2,5-Furandicarboxylic Acid and Its Derivatives

Recent progress in energy-saving electrocatalytic hydrogen production via regulating the anodic oxidation reaction

Hydrogen energy with its advantages of high calorific value, renewable nature, and zero carbon emissions is considered an ideal candidate for clean energy in the future. The electrochemical decomposition of water, powered by renewable and clean energy sources, presents a sustainable and environmentally friendly approach to hydrogen production. However, the traditional electrochemical overall water-splitting reaction (OWSR) is limited by the anodic oxygen evolution reaction (OER) with sluggish kinetics. Although important advances have been made in efficient OER catalysts, the theoretical thermodynamic difficulty predetermines the inevitable large potential (1.23 V vs. RHE for the OER) and high energy consumption for the conventional water electrolysis to obtain H2. Besides, the generation of reactive oxygen species at high oxidation potentials can lead to equipment degradation and increase maintenance costs. Therefore, to address these challenges, thermodynamically favorable anodic oxidation reactions with lower oxidation potentials than the OER are used to couple with the cathodic hydrogen evolution reaction (HER) to construct new coupling hydrogen production systems. Meanwhile, a series of robust catalysts applied in these new coupled systems are exploited to improve the energy conversion efficiency of hydrogen production. Besides, the electrochemical neutralization energy (ENE) of the asymmetric electrolytes with a pH gradient can further promote the decrease in application voltage and energy consumption for hydrogen production. In this review, we aim to provide an overview of the advancements in electrochemical hydrogen production strategies with low energy consumption, including (1) the traditional electrochemical overall water splitting reaction (OWSR, HER-OER); (2) the small molecule sacrificial agent oxidation reaction (SAOR) and (3) the electrochemical oxidation synthesis reaction (EOSR) coupling with the HER (HER-SAOR, HER-EOSR), respectively; (4) regulating the pH gradient of the cathodic and anodic electrolytes. The operating principle, advantages, and the latest progress of these hydrogen production systems are analyzed in detail. In particular, the recent progress in the catalytic materials applied to these coupled systems and the corresponding catalytic mechanism are further discussed. Furthermore, we also provide a perspective on the potential challenges and future directions to foster advancements in electrocatalytic green sustainable hydrogen production.

Multistep Biooxidation of 5-(Hydroxymethyl)furfural to 2,5-Furandicarboxylic Acid with H2O2 by Unspecific Peroxygenases

5-(Hydroxymethyl)furfural (HMF) is a key platform chemical derived from renewable biomass sources, holding great potential as starting material for the synthesis of valuable compounds, thereby replacing petrochemical-derived counterparts. Among these valorised compounds, 2,5-furandicarboxylic acid (FDCA) has emerged as a versatile building block. Here we demonstrate the biocatalytic synthesis of FDCA from HMF via a one-pot three-step oxidative cascade performed via two operative steps under mild reaction conditions employing two unspecific peroxygenases (UPOs) using hydrogen peroxide as the only oxidant. The challenge of HMF oxidation by UPOs is the chemoselectivity of the first step, as one of the two possible oxidation products is only a poor substrate for further oxidation. The unspecific peroxygenase from Marasmius oreades (MorUPO) was found to oxidize 100 mM of HMF to 5-formyl-2-furoic acid (FFCA) with 95 % chemoselectivity. In the sequential one-pot cascade employing MorUPO (TON up to 13535) and the UPO from Agrocybe aegerita (AaeUPO, TON up to 7079), 100 mM of HMF were oxidized to FDCA reaching up to 99 % conversion and yielding 861 mg isolated pure crystalline FDCA, presenting the first example of a gram scale biocatalytic synthesis of FDCA involving UPOs.

Boosting 5-Hydroxymethylfurfural Electrooxidation by Porous Biochar via Loading Numerous Surface-Exposed Cobalt Phosphonates

The electrooxidation of 5-hydroxymethylfurfural (HMF) into 2,5-furandicarboxylic acid (FDCA) demonstrated its unique superiority, not only in reducing overpotential and improving energy conversion efficiency for green hydrogen production but also in utilizing abundant biomass resources and producing high-value-added chemicals. However, designing highly efficient electrocatalysts for HMF electrooxidation (HMF-EOR) with low cost and high performance for large-scale production remained a huge challenge. Herein, we introduced an easy one-step activation process to produce P-doped porous biochar loaded with multiple crystal surfaces exposed to CoP2O6 catalysts (CoP2O6@PC), which exhibited outstanding electrooxidation performance. To achieve a current density of 50 mA cm-2, only a low overpotential of 200 mV was needed for the electrooxidation of HMF in 1.0 M KOH + 10 mM HMF. This performance far surpassed that of other similar materials. CoP2O6@PC exhibited outstanding HMF-EOR performance with high conversion (nearly 100%), selectivity (97.1%), faradaic efficiency (95.3%), and robust stability. This work represents a promising strategy to fabricate macroscale and low-cost HMF-EOR electrocatalysts and achieve potential industrial applications of HMF-EOR.

Supporting Nano Catalysts for the Selective Hydrogenation of Biomass-derived Compounds

The selective hydrogenation of biomass derivatives presents a promising pathway for the production of high-value chemicals and fuels, thereby reducing reliance on traditional petrochemical industries. Recent strides in catalyst nanostructure engineering, achieved through tailored support properties, have significantly enhanced the hydrogenation performance in biomass upgrading. A comprehensive understanding of biomass selective upgrading reactions and the current advancement in supported catalysts is crucial for guiding future processes in renewable biomass. This review aims to summarize the development of supported nanocatalysts for the selective hydrogenation of the US DOE's biomass platform compounds derivatives into valuable upgraded molecules. The discussion includes an exploration of the reaction mechanisms and conditions in catalytic transfer hydrogenation (CTH) and high-pressure hydrogenation. By thoroughly examining the tailoring of supports, such as metal oxide catalysts and porous materials, in nano-supported catalysts, we elucidate the promoting role of nanostructure engineering in biomass hydrogenation. This endeavor seeks to establish a robust theoretical foundation for the fabrication of highly efficient catalysts. Furthermore, the review proposes prospects in the field of biomass utilization and address application bottlenecks and industrial challenges associated with the large-scale utilization of biomass.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

High-Surface Area Mesoporous Sc2O3 with Abundant Oxygen Vacancies as New and Advanced Electrocatalyst for Electrochemical Biomass Valorization

Scandium oxide (Sc2O3) is considered as omnipotent "Industrial Ajinomoto" and holds promise in catalytic applications. However, rarely little attention is paid to its electrochemistry. Here, the first nanocasting design of high-surface area Sc2O3 with abundant oxygen vacancies (mesoporous VO-Sc2O3) for efficient electrochemical biomass valorization is reported. In the case of the electro-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), quantitative HMF conversion, high yield, and high faradic efficiency of FDCA via the hydroxymethylfurancarboxylic acid pathway are achieved by this advanced electrocatalyst. The beneficial effect of the VO on the electrocatalytic performance of the mesoporous VO-Sc2O3 is revealed by the enhanced adsorption of reactants and the reduced energy barrier in the electrochemical process. The concerted design, in situ and ex situ experimental studies and theoretical calculations shown in this work should shed light on the rational elaboration of advanced electrocatalysts, and contribute to the establishment of a circular carbon economy since the bio-plastic monomer and green hydrogen are efficiently synthesized.

Synergistic Interaction between Ruthenium Catalysts and Grafted Niobium on SBA-15 for 2,5-Furandicarboxylic Acid Production Using 5-Hydroxymethylfurfural

This study entailed the synthesis of Ru nanocatalyst decorated on Nb-grafted SBA-15. A Nb-grafted SBA-15 support with varying Nb contents was utilized as a support for the Ru nanoparticles. The effect of Nb grafting on the immobilized Ru nanoparticle catalyst was systematically investigated, and its catalytic performance in the synthesis of furandicarboxylic acid using 5-hydroxymethylfurfural under base-free reaction conditions was evaluated. The results indicate the increased productivity of the Ru@Nb-grafted SBA-15 catalyst with a yield exceeding 95%, representing a significant advancement in catalysis. This study also affords insights into the complex relationship between the catalytic activity and selectivity and its unique surface attributes. Moreover, acidic sites were created, and the electron density within the active sites was modulated by monomeric Nb oxide species on the SBA-15. Additionally, the role of high-electron-density Ru atoms in facilitating the efficient adsorption and activation of the reactant, resulting in enhanced catalytic efficacy, was highlighted.

Effect of K+ and Ca2+ Cations on Structural Manganese(IV) Oxide for the Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

The promising influences of K+ and Ca2+ ions in the development of effective MnO2 for the selective oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid (FDCA) were studied for the catalytic performance under a high-pressure reaction of aqueous O2 (0.5 MPa) in a basic system. Various oxidation states of manganese in MnO2 were able to accelerate the oxidation of 5-formyl-2-furancarboxylic acid to FDCA in the rate-determining step. The results were in good agreement that Ca2+ played a key role in the highest FDCA yield up to 85% due to the associated cations on the local coordination to enhance the high surface area and the electronic effect on the manganese ion. Both K-MnO2 and Ca-MnO2 catalysts showed excellent catalytic activities without a significant change in the efficiency in the reusability experiments.

Oxygen Vacancy-Induced Metal-Support Interactions in AuPd/ZrO2 Catalysts for Boosting 5-Hydroxymethylfurfural Oxidation

The construction of strong metal-support interactions in oxide-supported noble metal nanocatalysts has been considered an emerging and efficient way in improving catalytic performance in biomass-upgrading reactions. Herein, a citric acid (CA)-assisted synthesized ZrO2 layer with improved oxygen vacancy (Ov) concentrations on a natural clay mineral of halloysite nanotubes (HNTs) was designed. Moreover, AuxPdy/ZrO2@HNTs-zCA catalysts were prepared by loading AuPd bimetal and employed for aerobic oxidation of the lignocellulosic biomass-derived 5-hydroxymethylfurfural (HMF) platform to the bioplastic monomer 2,5-furandicarboxylic acid (FDCA) with water as the solvent. The results of catalytic experiments revealed that the Au3Pd1/ZrO2@HNTs-1.0CA catalyst exhibited excellent catalytic activity at 0.5 MPa O2, with a satisfactory FDCA yield of 99.5% and outstanding FDCA formation rate of 1057.9 mmol·g-1·h-1. The improved Ov concentration in the ZrO2 support enhanced the adsorption and activation ability of the catalyst for O2, and a higher Lewis acid concentration provided a stronger adsorption ability of the catalyst for reaction substrates. Besides, the synergistic effect of AuPd bimetallic nanoparticles steered the tandem oxidation of aldehyde and alcohol groups in HMF and accelerated the rate-determining step. More importantly, the relationship between the Ov concentration and catalytic performance also demonstrated that the enhanced catalytic activity for HMF oxidation was mainly attributed to the active interface of AuPd-ZrOx. This work offers fresh insights into rationally designing oxygen vacancy-driven strong interactions between the oxide support and noble nanoparticles for the catalytic upgrade of biomass platform chemicals.

Recent progress, trends, and new challenges in the electrochemical production of green hydrogen coupled to selective electrooxidation of 5-hydroxymethylfurfural (HMF)

The production of clean electrical energy and the correct use of waste materials are two topics that currently concern humanity. In order to face both problems, extensive work has been done on the electrolytic production of green H2 coupled with the electrooxidative upgrading of biomass platform molecules. 5-Hydroxymethylfurfural (HMF) is obtained from forest waste biomass and can be selectively oxidized to 2,5-furandicarboxylic acid (FDCA) by electrochemical pathways. FDCA is an attractive precursor to polyethylene furanoate (PEF), with the potential to replace petroleum-based polyethylene terephthalate (PET). An integrated electrochemical system can simultaneously produce H2 and FDCA at a lower energy cost than that required for electrolytic water splitting. Here, the benefits of the electrochemical production of H2 and FDCA over other production methods are presented, as well as the innovative applications of each reaction product and the advantages of carrying out both reactions in a coupled system. The recently reported progress is disclosed, through an exploration of electrocatalyst materials used in simultaneous production, including the use of nickel foams (NF) as modification substrates, noble and non-noble metals, metal non-oxides, metal oxides, spinel oxides and the introduction of oxygen vacancies. Based on the latest trends, the next challenges associated with its large-scale production are proposed for its implementation in the industrial world. This work can offer a guideline for the detailed understanding of the electrooxidation of HMF towards FDCA with the production of H2, as well as the design of advanced electrocatalysts for the sustainable use of renewable resources.

Enhancement of Sulfur Source-Dependent Zn Vacancies in Different Photocatalytic Performances of ZnIn2S4 Nanoparticles

This study focuses on the synthesis and investigation of ZnIn2S4 nanoparticle (NP) photocatalysts treated with different sulfur sources, thioacetamide (TAA), or thiourea (TU), to explore their wavelength-dependent photocatalytic activity. The research aims to understand the impact of Zn vacancies present on the surface of ZnIn2S4 NPs. The investigation involves electron spin resonance and in situ X-ray photoelectron spectroscopy to study the photocatalytic activity of ZnIn2S4-TU and ZnIn2S4-TAA NPs, following the characterization of surface morphology and electronic properties using high-resolution transmission electron microscopy and X-ray diffraction. Additionally, the study delves into the wavelength-dependent photocatalytic degradation (PCD) activity of the ZnIn2S4 NPs using 2,5-hydroxymethylfurfural (HMF) across a wide range. Notably, the selective oxidation of HMF using ZnIn2S4-TU NPs resulted in the formation of 2,5-furandicarboxylic acid (FDCA) via 2,5-diformylfuran, with an efficiency exceeding 40% over the broad wavelength range. The research demonstrates that the irradiation wavelength for PCD is influenced by the number of defect structures introduced into the ZnIn2S4 NPs through the sulfur source.

MOF Material-Derived Bimetallic Sulfide CoxNiyS for Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

The electrocatalytic conversion of biomass into high-value-added chemicals is one of the effective methods of green chemistry. Conventional metal catalysts have disadvantages, such as low atomic utilization and small surface areas. Catalyst materials derived from metal-organic frameworks (MOFs) have received much attention due to their unique physicochemical properties. Here, an MOF-derived non-precious metal CoxNiyS electrocatalyst was applied to the oxidation of biomass-derivative 5-hydroxymethylfurfural (HMF). The HMF oxidation reaction activities were modulated by regulating the content of Co and Ni bimetals, showing a volcano curve with an increasing proportion of Co. When the Co:Ni ratio was 2:1, the HMF conversion rate reached 84.5%, and the yield of the main product, 2,5-furandicarboxylic acid (FDCA), was 54%. The XPS results showed that the presence of high-valent nickel species after electrolysis, which further proved the existence and reactivity of NiOOH, as well as the synergistic effect of Co and Ni promoted the conversion of HMF. Increasing the content of Ni could increase the activity of HMF electrochemical oxidation, and increasing the content of Co could reduce the increase in the anodic current. This study has important significance for designing better HMF electrochemical catalysts in the future.

Regulating the Electronic Structure of Ni Sites in Ni(OH)2 by Ce Doping and Cu(OH)2 Coupling to Boost 5-Hydroxymethylfurfural Oxidation Performance

Biomass is a sustainable and renewable resource that can be converted into valuable chemicals, reducing the demand for fossil energy. 5-Hydroxymethylfurfural (HMF), as an important biomass platform molecule, can be converted to high-value-added 2,5-furandicarboxylic acid (FDCA) via a green and renewable electrocatalytic oxidation route under mild reaction conditions, but efficient electrocatalysts are still lacking. Herein, we rationally fabricate a novel self-supported electrocatalyst of core-shell-structured copper hydroxide nanowires@cerium-doped nickel hydroxide nanosheets composite nanowires on a copper mesh (CuH_NWs@Ce:NiH_NSs/Cu) for electrocatalytically oxidizing HMF to FDCA. The integrated configuration of composite nanowires with rich interstitial spaces between them facilitates fast mass/electron transfer, improved conductivity, and complete exposure of active sites. The doping of Ce ions in nickel hydroxide nanosheets (NiH_NSs) and the coupling of copper hydroxide nanowires (CuH_NWs) regulate the electronic structure of the Ni active sites and optimize the adsorption strength of the active sites to the reactant, meanwhile promoting the generation of strong oxidation agents of Ni³⁺ species, thereby resulting in improved electrocatalytic activity. Consequently, the optimal CuH_NWs@Ce:NiH_NSs/Cu electrocatalyst is able to achieve a HMF conversion of 98.5% with a FDCA yield of 97.9% and a Faradaic efficiency of 98.0% at a low constant potential of 1.45 V versus reversible hydrogen electrode. Meanwhile, no activity attenuation can be found after 15 successive cycling tests. Such electrocatalytic performance suppresses most of the reported Cu-based and Ni-based electrocatalysts. This work highlights the importance of structure and doping engineering strategies for the rational fabrication of high-performance electrocatalysts for biomass upgrading.

Chemoselective Lipase-Catalyzed Synthesis of Amido Derivatives from 5-Hydroxymethylfurfurylamine

The acylations of furfurylamine and 5-hydroxymethylfurfurylamine (HMFA) have been studied finding immobilized Candida antarctica lipase B (CALB) as an ideal biocatalyst. CALB was used immobilized on two different supports (Novozyme 435 and EziG-CALB), with the polymer-coated controlled porosity glass carrier material from EnginZyme being an excellent carrier to yield an active and stable enzymatic preparation for the acylation of the primary amine group. The amount of the acyl donor in the reaction was a key factor to achieve the mono- and chemoselective N-protection of HMFA with large excess of ethyl acetate leading to the formation of the N,O-diacetylated product. Thus, a series of 16 nonactivated esters were used to selectively modify the amine group of HMFA, obtaining 9 hydroxy amides under mild reaction conditions and with quantitative yields through chromatography-free transformations. The influence of substrate concentration was studied, resulting in complete conversions in all cases after 22 h (100-1000 mM). Excellent results were observed at 100 and 200 mM of HMFA, while higher concentrations led to longer reaction times and, to some extent, the formation of the diacetylated product (up to 7% after 22 h at 1 M). After this optimization, a metric analysis was performed to confirm the high sustainability of the presented process (E-factor of 1.1 excluding solvents) upon intensification of the biotransformation to 1 g at 200 mM HMFA concentration. The possibility of obtaining orthogonally protected HMFA-derived amido esters has been achieved through a clean and sequential one-pot process using EziG-CALB, which involved the use of ethyl methoxy acetate as the nonactivated ester for N-acylation and the activated vinyl acetate for O-protection.

A Comprehensive Review on Metal Catalysts for the Production of Cyclopentanone Derivatives from Furfural and HMF

The catalytic transformation of biomass-based furan compounds (furfural and HMF) for the synthesis of organic chemicals is one of the important ways to utilize renewable biomass resources. Among the numerous high-value products, cyclopentanone derivatives are a kind of valuable compound obtained by the hydrogenation rearrangement of furfural and HMF in the aqueous phase of metal-hydrogen catalysis. Following the vast application of cyclopentanone derivatives, this reaction has attracted wide attention since its discovery, and a large number of catalytic systems have been reported to be effective in this transformation. Among them, the design and synthesis of metal catalysts are at the core of the reaction. This review briefly introduces the application of cyclopentanone derivatives, the transformation mechanism, and the pathway of biomass-based furan compounds for the synthesis of cyclopentanone derivatives. The important progress of metal catalysts in the reaction since the first report in 2012 up to now is emphasized, the characteristics and catalytic performance of different metal catalysts are introduced, and the critical role of metal catalysts in the reaction is discussed. Finally, the future development of this transformation process was prospected.

Interfacial Engineering of Ni/Ni0.2Mo0.8N Heterostructured Nanorods Realizes Efficient 5-Hydroxymethylfurfural Electrooxidation and Hydrogen Evolution

Simultaneously achieving electrochemical conversion of biomass-derived molecules into value-added products and energy-efficient hydrogen production is a highly attractive strategy but challenging. Herein, we reported a heterostructured Ni/Ni_0.2Mo_0.8N nanorod array electrocatalyst deposited on nickel foam (Ni/Ni_0.2Mo_0.8N/NF), which exhibited excellent electrocatalytic activity toward 5-hydroxymethylfurfural (HMF) oxidation, and nearly 100% conversion of HMF and 98.5% yield of 2,5-furandicarboxylic acid (FDCA) products can be achieved. The post-reaction characterizations unveil that Ni species in Ni/Ni_0.2Mo_0.8N/NF would be readily converted to NiOOH as the real active sites. Furthermore, a two-electrode electrolyzer was assembled with Ni/Ni_0.2Mo_0.8N/NF utilized as a bifunctional electrocatalyst for both the cathode and anode, giving rise to a low voltage of 1.51 V to concurrently produce FDCA and H₂ at 50 mA cm^-2. This work enlightens the significance of regulating redox activities of transition metals via interfacial engineering and constructing heterostructured electrocatalysts toward more efficient energy utilization.

Mechanistic Studies into the Selective Production of 2,5-furandicarboxylic Acid from 2,5-bis(hydroxymethyl)furan Using Au-Pd Bimetallic Catalyst Supported on Nitrated Carbon Material

Aerobic oxidation of bio-sourced 2,5-bis(hydroxymethyl)furan (BHMF) to 2, 5-furandicarboxylic acid (FDCA), a renewable and green alternative to petroleum-derived terephthalic acid (TPA), is of great significance in green chemicals production. Herein, hierarchical porous bowl-like nitrogen-rich (nitrated) carbon-supported bimetallic Au-Pd nanocatalysts (AumPdn/ N-BNxC) with different nitrogen content and bimetal nanoparticle sizes were developed and employed for the highly efficient aerobic oxidation of BHMF to FDCA in sodium carbonate aqueous solution. The reaction pathway for catalytic oxidation of BHMF went through the steps of BHMF→HMF→HMFCA→FFCA→FDCA. Kinetics studies showed that the activation energies of BHMF, HMF, HMFCA, and FFCA were 58.1 kJ·moL−1, 39.1 kJ·moL−1, 129.2 kJ·moL−1, and 56.3 kJ·moL−1, respectively, indicating that the oxidation of intermediate HMFCA to FFCA was the rate-determining step. ESR tests proved that the active species was a superoxide radical. Owing to the synergy between the nitrogen-rich carbon support and bimetallic Au-Pd nanoparticles, the Au1Pd1/N-BN2C nanocatalysts exhibited BHMF conversion of 100% and FDCA yield of 95.8% under optimal reaction conditions. Furthermore, the nanocatalysts showed good stability and reusability. This work provides a versatile strategy for the design of heterogeneous catalysts for the highly efficient production of FDCA from BHMF.

Disproportional surface segregation in ligand-free gold-silver alloy solid solution nanoparticles, and its implication for catalysis and biomedicine

Catalytic activity and toxicity of mixed-metal nanoparticles have been shown to correlate and are known to be dependent on surface composition. The surface chemistry of the fully inorganic, ligand-free silver-gold alloy nanoparticle molar fraction series, is highly interesting for applications in heterogeneous catalysis, which is determined by active surface sites which are also relevant for understanding their dissolution behavior in biomedically-relevant ion-release scenarios. However, such information has never been systematically obtained for colloidal nanoparticles without organic surface ligands and has to date, not been analyzed in a surface-normalized manner to exclude density effects. For this, we used detailed electrochemical measurements based on cyclic voltammetry to systematically analyze the redox chemistry of particle-surface-normalized gold-silver alloy nanoparticles with varying gold molar fractions. The study addressed a broad range of gold molar fractions (Ag₉₀Au₁₀, Ag₈₀Au₂₀, Ag₇₀Au₃₀, Ag₅₀Au₅₀, Ag₄₀Au₆₀, and Ag₂₀Au₈₀) as well as monometallic Ag and Au nanoparticle controls. Oxygen reduction reaction (ORR) measurements in O₂ saturated 0.1 M KOH revealed a linear reduction of the overpotential with increasing gold content on the surface, probably attributed to the higher ORR activity of gold over silver, verified by monometallic Ag and Au controls. These findings were complemented by detailed XPS studies revealing an accumulation of the minor constituent of the alloy on the surface, e.g., silver surface enrichment in gold-rich particles. Furthermore, highly oxidized Ag surface site enrichment was detected after the ORR reaction, most pronounced in gold-rich alloys. Further, detailed CV studies at acidic pH, analyzing the position, onset potential, and peak integrals of silver oxidation and silver reduction peaks revealed particularly low reactivity and high chemical stability of the equimolar Au₅₀Ag₅₀ composition, a phenomenon attributed to the outstanding thermodynamic, entropically driven, stabilization arising at this composition.

Larix Sibirica Arabinogalactan Hydrolysis over Zr-SBA-15; Depolymerization Insight

Arabinogalactan depolymerization over solid Zr-containing SBA-15-based catalyst was studied via HPLC, GPC, and theoretical modeling. Arabinogalactans (AG) are hemicelluloses mainly present in larch wood species, which can be extracted on an industrial scale. The application of solid acid catalysts in the processes of hemicellulose conversion can exclude serious drawbacks such as equipment corrosion, etc. Characterization of 5%Zr-SBA-15 confirmed the successful formation of the mesoporous structure inherent to SBA-15 with fine Zr distribution and strong acidic properties (XRD, XPS, FTIR, pH_pzc). Carrying out the process at 130 °C allowed us to achieve total products yield of up to 59 wt%, which is represented mainly by galactose (51 wt%) and minor (less than 9 wt%) presence of arabinose, furfural, 5-HMF, and levulinic acid. The temperature increases up to 150 °C resulted in a total product yield drop down to 37 wt%, making temperature elevation above 130 °C obsolete. According to the theoretical investigations, arabinogalactan depolymerization follows the primary cleavage of the β(1→3) bonds between the D-galactose units of the main chain, which is also confirmed by GPC.

From Biomass to Functional Crystalline Diamond Nanothread: Pressure-Induced Polymerization of 2,5-Furandicarboxylic Acid

2,5-Furandicarboxylic acid (FDCA) is one of the top-12 value-added chemicals from sugar. Besides the wide application in chemical industry, here we found that solid FDCA polymerized to form an atomic-scale ordered sp³-carbon nanothread (CNTh) upon compression. With the help of perfectly aligned π-π stacked molecules and strong intermolecular hydrogen bonds, crystalline poly-FDCA CNTh with uniform syn-configuration was obtained above 11 GPa, with the crystal structure determined by Rietveld refinement of the X-ray diffraction (XRD). The in situ XRD and theoretical simulation results show that the FDCA experienced continuous [4 + 2] Diels-Alder reactions along the stacking direction at the threshold C···C distance of ∼2.8 Å. Benefiting from the abundant carbonyl groups, the poly-FDCA shows a high specific capacity of 375 mAh g^-1 as an anode material of a lithium battery with excellent Coulombic efficiency and rate performance. This is the first time a three-dimensional crystalline CNTh is obtained, and we demonstrated it is the hydrogen bonds that lead to the formation of the crystalline material with a unique configuration. It also provides a new method to move biomass compounds toward advanced functional carbon materials.

Paired electrocatalysis in 5-hydroxymethylfurfural valorization

5-Hydroxymethylfurfural (HMF) has aroused considerable interest over the past years as an important biomass-derived platform molecule, yielding various value-added products. The conventional HMF conversion requires noble metal catalysts and harsh operating conditions. On the other hand, the electrocatalytic conversion of HMF has been considered as an environmentally benign alternative. However, its practical application is limited by low overall energy efficiency and incomplete conversion. Paired electrolysis and highly efficient electrocatalysts are two viable strategies to address these limitations. Herein, an overview of coupled electrocatalytic HMF hydrogenation or hydrogen evolution reaction (HER) with HMF oxidation as well as the associated electrocatalysts are reviewed and discussed. In this mini-review, a brief introduction of electrocatalytic HMF upgrading is given, followed by the recent advances and challenges of paired electrolysis with an emphasis on the integration HMF electrohydrogenation with HMF electrooxidation. Finally, a perspective for a future sustainable biomass upgrading community based on electrocatalysis is proposed.

Alloy-Driven Efficient Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural towards 2,5-Furandicarboxylic Acid: A Review

In recent years, electrocatalysis was progressively developed to facilitate the selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) towards the value-added chemical 2,5-furandicarboxylic acid (FDCA). Among reported electrocatalysts, alloy materials have demonstrated superior electrocatalytic properties due to their tunable electronic and geometric properties. However, a specific discussion of the potential impacts of alloy structures on the electrocatalytic HMF oxidation performance has not yet been presented in available Reviews. In this regard, this Review introduces the most recent perspectives on the alloy-driven electrocatalysis for HMF oxidation towards FDCA, including oxidation mechanism, alloy nanostructure modulation, and external conditions control. Particularly, modulation strategies for electronic and geometric structures of alloy electrocatalysts have been discussed. Challenges and suggestions are also provided for the rational design of alloy electrocatalysts. The viewpoints presented herein are anticipated to potentially contribute to a further development of alloy-driven electrocatalytic oxidation of HMF towards FDCA and to help boost a more sustainable and efficient biomass refining system.

Leveraging Pt/Ce1-xLaxO2-δ To Elucidate Interfacial Oxygen Vacancy Active Sites for Aerobic Oxidation of 5-Hydroxymethylfurfural

The interfacial oxygen-defective sites of oxide-supported metal catalysts are generally regarded as active centers in diverse redox reactions. Identification of their structure-property relationship at the atomic scale is of great importance but challenging. Herein, a series of La³⁺-doped three-dimensionally ordered macroporous CeO₂ (3D-Ce_1-xLa_xO_2-δ) were synthesized and applied as supports for Pt nanoparticles. The pieces of evidence from a suite of in-situ/ex-situ characterizations and theoretical calculations revealed that the La³⁺-mono-substituted La-□(-Ce)₂ sites (where □ represents an oxygen vacancy) exhibited superior charge transfer ability, behaving as trapping centers for Pt nanoparticles. The resulting interfacial Pt^δ+/La-□(-Ce)₂ sites served as the reversible active species in the aerobic oxidation of 5-hydroxymethylfurfural to boost catalytic performance by simultaneously promoting oxygen activated capacity and the cleavage of O-H/C-H bonds of adsorbed hydroxymethyl groups. Consequently, the Pt/3D-Ce_0.9La_0.1O_2-δ catalyst possessing the highest number of Pt^δ+/La-□(-Ce)₂ sites showed the best catalytic performance with 99.6% yield to 2,5-furandicarboxylic acid in 10 h. These results offer more insights into the promoting mechanism of interfacial oxygen-defective sites for the liquid-phase aerobic oxidation of aldehydes and alcohols.

Efficient Catalytic Conversion of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid over Ruthenium Cluster-Embedded Ni(OH)2 Catalyst

5-Hydroxymethylfurfural (HMF) can be oxidized to 2,5-furandicarboxylic acid (FDCA) for the production of biorenewable plastics to replace fossil resourced polyethylene terephthalate (PET). Development of a highly efficient electrocatalyst using renewable electricity as energy input is highly desired. In this work, Ru cluster-embedded Ni(OH)₂ nanosheets [Ru/Ni(OH)₂ ] were synthesized and exploited as electrochemical catalysts for the conversion of HMF to FDCA. Ru/Ni(OH)₂ exhibited significantly improved current density (40 mA cm^-2 at 1.41 V vs. reversible hydrogen electrode) of over 7.7 times in comparison with Ni(OH)₂ , and nearly 100 % conversion degree for HMF and 98.5 % selectivity towards FDCA were obtained. Operando Raman experiments revealed the catalysis was facilitated by the interconversion between Ni³⁺ and Ni²⁺ . Density functional theory calculations further revealed the effect of Ru clusters of Ni(OH)₂ , thereby promoting HMF adsorption capacity on Ni sites to boost HMF oxidation activity. This work provides a novel strategy using Ru clusters to modify earth abundant Ni based catalyst for HMF oxidation to obtain high-value biomass-derived products.

Base-Free Aerobic Oxidation of Furfuralcohols and Furfurals to Furancarboxylic Acids over Nitrogen-Doped Carbon-Supported AuPd Bowl-Like Catalyst

Upgrading furfuralcohols and furfurals to furancarboxylic acids is of great significance for high value-added downstream chemicals synthesis and biomass conversion. Developing an efficient catalyst is the key to acquiring a completely sustainable process. Herein, nitrogen-doped carbon-supported bimetallic AuPd bowl-like catalysts were synthesized. The surface wettability of nitrogen-doped carbon was well adjusted by the nitrification process. Benefiting from the alloying effect of bimetallic AuPd catalyst and the formation of hydroxyl radical initiated by H₂ O dissociation on the hydrophilic surface of nitrated nitrogen-doped carbon, base-free aerobic oxidation of 5-hydroxymethylfurfural (HMF) could produce the highest 2,5-furandicarboxylic acid (FDCA) yield of 93.9 %. In-situ infrared spectroscopy uncovered adsorption configuration of HMF, and the nitrated carbon surface was favorable for HMF and intermediates to enter the active sites, greatly promoting the catalytic oxidation process. Employing other furfuralcohols (furfuryl alcohol, furan-2,5-diyldimethanol, 2,5-bishydroxymethylfuran) as well as furfural and 5-methylfurfural as starting materials, 35.6-95.4 % yield of furancarboxylic acids (FDCA, 2-furoic acid, 5-methyl-2-furoic acid) were also obtained. Moreover, the developed catalysts could maintain excellent stability and activity after four successive runs. This deep insight into the role of bimetallic synergy and surface wettability provides a basis for the rational design of the highly efficient catalysts for the oxidation of furfuralcohols and furfurals and related reactions.

5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid on Noble Metal-Free Nanocrystalline Mixed Oxide Catalysts

Noble metal-free catalysts based on earth-abundant and inexpensive mixed oxides are active catalysts of all steps of the reaction cascade leading from 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) using tert-butyl hydroperoxide (TBHP) as oxidation agent. Catalysts covering the whole range of composition in the Cu-Mn and Co-Fe series have been prepared and characterised. The nature and composition of the catalyst strongly affect conversion and selectivity. The distribution of products indicates that radical-type oxygen species, deriving from the activation of TBHP, play a determining role in the reaction. The early steps of reaction mainly follow the pattern expected for heterogeneous Fenton catalysts. Mixed oxide catalysts are the most effective in further oxidation steps, leading to the formation of FDCA, both in the Cu-Mn and Co-Fe systems. This behaviour can be related to the distribution of charge in the mixed oxides, suggesting a possible implication of the lattice oxygen in the last reaction steps. The results provide indications on how to optimize the reaction and minimize the formation of byproducts (humins and oligomers).

Research Progress of Highly Efficient Noble Metal Catalysts for the Oxidation of 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) is considered to be one of the most pivotal multifunctional biomass platform chemicals. This Review discusses recent advances in catalytic oxidation of HMF towards high-value products. The reaction mechanism of different noble metals and the path of HMF oxidation to high-value products have been deeply investigated in the noble metal catalytic system. The reaction mechanisms of different noble metals and HMF conversion paths were compared in detail. Moreover, the factors affecting the performance of different noble metal catalysts were summarized. Finally, effective strategies were put forward to improve the catalytic performance of noble metal catalysts. The purpose is to provide a valuable reference for the academic research on the preparation of oxidation products from biomass-based HMF and the industrial application of noble metal catalysts.

Challenges of Green Production of 2,5-Furandicarboxylic Acid from Bio-Derived 5-Hydroxymethylfurfural: Overcoming Deactivation by Concomitant Amino Acids

The oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) is highly attractive as FDCA is considered as substitute for the petrochemically derived terephthalic acid. There are only few reports on the direct use of unrefined HMF solutions from biomass resources and the influence of remaining constituents on the catalytic processes. In this work, the oxidation of HMF in a solution as obtained from hydrolysis and dehydration of saccharides in chicory roots was investigated without intermediate purification steps. The amount of base added to the solution was critical to increase the FDCA yield. Catalyst deactivation occurred and was attributed to poisoning by amino acids from the bio-source. A strong influence of amino acids on the catalytic activity was found for all supported Au, Pt, Pd, and Ru catalysts. A supported AuPd(2 : 1)/C alloy catalyst exhibited both superior catalytic activity and higher stability against deactivation by the critical amino acids.

Facile Production of 2,5-Furandicarboxylic Acid via Oxidation of Industrially Sourced Crude 5-Hydroxymethylfurfural

The oxidation of 5-hydroxymethylfurfural (HMF) produces value-added chemicals such as 2,5-diformylfuran (DFF) and 2,5-furandicarboxylic acid (FDCA). In this work, FDCA production was achieved by oxidation of crude HMF solution containing around 45 % HMF and unwanted byproducts such as 5,5'-[oxy-bis(methylene)]bis-2-furfural (HMF dimer) and polymers. At optimized reaction conditions similar to the Mid-Century process, homogeneous oxidation of the crude HMF (up to 20 wt% in the feed) by Co/Mn/Br catalyst in acetic acid solution produced FDCA at >95 % yield. The solid FDCA product contained <4000 ppm 5-formyl-2-furancarboxylic acid (FFCA). Such high yields were observed because the impurities in crude HMF were also converted to FDCA, as confirmed by the facile oxidation of HMF dimer to FDCA under reaction conditions. The successful demonstration of crude HMF as feed, obviating the need for HMF purification, suggests potential for cost-effectively producing FDCA in existing terephthalic plants.

Electro- and Photocatalytic Oxidative Upgrading of Bio-based 5-Hydroxymethylfurfural

Conversion of biomass into biofuels and high value-added chemicals is a promising strategy to solve the increasingly deteriorating environmental problems caused by fossil energy consumption. The development of efficient technologies and methods is the premise and guarantee to realize the high-value conversion of biomass. 5-Hydroxymethylfurfural (HMF), as a versatile biomass platform compound, is generated via dehydration of hexoses (e. g., fructose and glucose) derived from cellulosic biomass. This Review gives an overview of the advances and challenges of electro- and photocatalytic oxidation of biomass-derived HMF to high-value chemicals such as 2,5-formylfuran (DFF) and 2,5-furandicarboxylic acid (FDCA). These strategies and methods for the preparation of high-value chemicals by electro- and photocatalytic oxidation of HMF, coupled with, for example, hydrogen evolution reaction, organic substrate reduction, CO₂ reduction reaction, or N₂ reduction reaction, were summarized and discussed. Moreover, the catalytic efficiency and mechanism of different types of catalysts were also introduced in these conversion systems.

Green Chemistry, Biocatalysis, and the Chemical Industry of the Future

In the movement to decarbonize our economy and move away from fossil fuels we will need to harness the waste products of our activities, such as waste lignocellulose, methane, and carbon dioxide. Our wastes need to be integrated into a circular economy where used products are recycled into a manufacturing carbon cycle. Key to this will be the recycling of plastics at the resin and monomer levels. Biotechnology is well suited to a future chemical industry that must adapt to widely distributed and diverse biological chemical feedstocks. Our increasing mastery of biotechnology is allowing us to develop enzymes and organisms that can synthesize a widening selection of desirable bulk chemicals, including plastics, at commercially viable productivities. Integration of bioreactors with electrochemical systems will permit new production opportunities with enhanced productivities and the advantage of using a low-carbon electricity from renewable and sustainable sources.

Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran Over a Modified CoAl-Hydrotalcite Catalyst

The catalytic hydrogenolysis of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is a promising route towards sustainable liquid fuels with a high energy density. Herein, a novel CuCoNiAl-containing mixed metal oxide catalyst (CuCoNiAl-MMO) was prepared by calcination a layered double hydroxide (LDH) precursor in N₂ at 500 °C, then applied for the catalytic hydrogenolysis of HMF to DMF. The effects of reaction time, reaction temperature and hydrogen pressure on DMF selectivity were investigated. Under relatively mild reaction conditions (180°C, 1.0 MPa H₂, 6.0 h), CuCoNiAl-MMO showed both a high initial activity and selectivity for hydrogenolysis of HMF to DMF, with HMF conversion rate of 99.8% and DMF selectivity of 95.3%. Catalysts characterization studies using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) revealed the presence of various metal oxides and metallic copper on the surface of the CuCoNiAl-MMO catalyst, with the presence of mixed metal-oxide-supported metallic Cu nanoparticles being responsible good hydrogenolysis activity of the catalyst for selective DMF synthesis.

Oxidation of 5-hydroxymethylfurfural with a novel aryl alcohol oxidase from Mycobacterium sp. MS1601

Bio‐based 5‐hydroxymethylfurfural (HMF) serves as an important platform for several chemicals, among which 2,5‐furan dicarboxylic acid (FDCA) has attracted considerable interest as a monomer for the production of polyethylene furanoate (PEF), a potential alternative for fossil‐based polyethylene terephthalate (PET). This study is based on the HMF oxidizing activity shown by Mycobacterium sp. MS 1601 cells and investigation of the enzyme catalysing the oxidation. The Mycobacterium whole cells oxidized the HMF to FDCA (60% yield) and hydroxymethyl furan carboxylic acid (HMFCA). A gene encoding a novel bacterial aryl alcohol oxidase, hereinafter MycspAAO, was identified in the genome and was cloned and expressed in Escherichia coli Bl21 (DE3). The purified MycspAAO displayed activity against several alcohols and aldehydes; 3,5 dimethoxy benzyl alcohol (veratryl alcohol) was the best substrate among those tested followed by HMF. 5‐Hydroxymethylfurfural was converted to 5‐formyl‐2‐furoic acid (FFCA) via diformyl furan (DFF) with optimal activity at pH 8 and 30–40°C. FDCA formation was observed during long reaction time with low HMF concentration. Mutagenesis of several amino acids shaping the active site and evaluation of the variants showed Y444F to have around 3‐fold higher k_cat/K_m and ~1.7‐fold lower K_m with HMF.

Electrochemically Derived Crystalline CuO from Covellite CuS Nanoplates: A Multifunctional Anode Material

In the present era, electrochemical water splitting has been showcased as a reliable solution for alternative and sustainable energy development. The development of a cheap, albeit active, catalyst to split water at a substantial overpotential with long durability is a perdurable challenge. Moreover, understanding the nature of surface-active species under electrochemical conditions remains fundamentally important. A facile hydrothermal approach is herein adapted to prepare covellite (hexagonal) phase CuS nanoplates. In the covellite CuS lattice, copper is present in a mixed-valent state, supported by two different binding energy values (932.10 eV for Cu^I and 933.65 eV for Cu^II) found in X-ray photoelectron spectroscopy analysis, and adopted two different geometries, that is, trigonal planar preferably for Cu^I and tetrahedral preferably for Cu^II. The as-synthesized covellite CuS behaves as an efficient electro(pre)catalyst for alkaline water oxidation while deposited on a glassy carbon and nickel foam (NF) electrodes. Under cyclic voltammetry cycles, covellite CuS electrochemically and irreversibly oxidized to CuO, indicated by a redox feature at 1.2 V (vs the reversible hydrogen electrode) and an ex situ Raman study. Electrochemically activated covellite CuS to the CuO phase (termed as CuS_EA) behaves as a pure copper-based catalyst showing an overpotential (η) of only 349 (±5) mV at a current density of 20 mA cm^-2, and the TOF value obtained at η₃₄₉ (at 349 mV) is 1.1 × 10^-3 s^-1. A low R_ct of 5.90 Ω and a moderate Tafel slope of 82 mV dec^-1 confirm the fair activity of the CuS_EA catalyst compared to the CuS precatalyst, reference CuO, and other reported copper catalysts. Notably, the CuS_EA/NF anode can deliver a constant current of ca. 15 mA cm^-2 over a period of 10 h and even a high current density of 100 mA cm^-2 for 1 h. Post-oxygen evolution reaction (OER)-chronoamperometric characterization of the anode via several spectroscopic and microscopic tools firmly establishes the formation of crystalline CuO as the active material along with some amorphous Cu(OH)₂ via bulk reconstruction of the covellite CuS under electrochemical conditions. Given the promising OER activity, the CuS_EA/NF anode can be fabricated as a water electrolyzer, Pt(-)//(+)CuS_EA/NF, that delivers a j of 10 mA cm^-2 at a cell potential of 1.58 V. The same electrolyzer can further be used for electrochemical transformation of organic feedstocks like ethanol, furfural, and 5-hydroxymethylfurfural to their respective acids. The present study showcases that a highly active CuO/Cu(OH)₂ heterostructure can be constructed in situ on NF from the covellite CuS nanoplate, which is not only a superior pure copper-based electrocatalyst active for OER and overall water splitting but also for the electro-oxidation of industrial feedstocks.