Effect of Boron Modifications of Palladium Catalysts for the Production of Hydrogen from Formic Acid

Chemical activation of atom-precise Pd3 nanoclusters on γ-Al2O3 supports for transfer hydrogenation reactions

Deposition of atom-precise nanoclusters onto solid supports is a promising route to synthesize model heterogeneous catalysts. However, to enhance nanocluster-support interactions, activation of the nanoclusters by removal of surface ligands is necessary. Thermal treatment to remove surface ligands from supported metal nanoclusters can yield highly active heterogeneous catalysts, however, the high temperatures employed can lead to poor control over the final size and speciation of the nanoclusters. As an alternative to high-temperature thermal treatments, chemical activation of [Pd3(μ-Cl)(μ-PPh2)2(PPh3)3]+ (Pd3) nanoclusters on γ-Al2O3 supports under mild reaction conditions has been demonstrated in this work. Hydride-based reducing agents such as NaBH4, LiBH4, and LiAlH4 have been examined for the activation of the Pd3 nanoclusters. The structural evolution and speciation of the nanoclusters after activation have been monitored using a combination of XAS, XPS, STEM-EDX mapping, and solid-state NMR techniques. The results indicate that treatment with borohydride reducing agents successfully removed surface phosphine and chloride ligands, and the extent of size growth of the nanoclusters during activation is directly correlated with the amount of borohydride used. Borate side products remain on the γ-Al2O3 surface after activation; moreover, exposure to high amounts of NaBH4 resulted in the incorporation of B atoms inside the lattice of the activated Pd nanoclusters. LiAlH4 treatment, on the other hand, led to no significant size growth of the nanoclusters and resulted in a mixture of Pd single-atom sites and activated nanoclusters on the γ-Al2O3 surface. Finally, the catalytic potential of the activated nanoclusters has been tested in the transfer hydrogenation of trans-cinnamaldehyde, using sodium formate/formic acid as the hydrogen donor. The catalytic results showed that smaller Pd nanoclusters are much more selective for hydrogenating trans-cinnamaldehyde to hydrocinnamaldehyde, but overall have lower activity compared to larger Pd nanoparticles. Overall, this study showcases chemical activation routes as an alternative to traditional thermal activation routes for activating supported nanoclusters by offering improved speciation and size control.

Construction of H-Doped PdB Nanocrystals as Electrocatalysts to Modulate Formic Acid Oxidation

The strong ligand effect in B-doped Pd-based (PdB) catalysts renders them a promising anode for constructing formic acid fuel cells (FAFCs) exhibiting high power density and outstanding stability. However, the enhancement of the oxidation barrier is unavoidable in this alloy system owing to the electron transfer (ET) from B to Pd. In this study, a hydrogen doping strategy is employed to open charge freedom in PdB compounds and boost their formic acid oxidation reaction (FAOR) activity by suppressing the ET process. The resulting hydrogen-doped PdB (PdBH) exhibits an ultrahigh mass activity of up to 1.2A mg-1 Pd, which is 3.23 times that of the PdB catalyst and 9.55 times that of Pd black. Detailed experimental and theoretical studies show that the interstitial hydrogen leads to enhanced orbital hybridization and reduced electron density around Pd. This optimized ligand effect weakens the carbon monoxide adsorption and increases the direct pathway preference of PdBH, resulting in its outstanding catalytic activity for the FAOR. The development of this high-performance hydrogen-doped PdB catalyst is an important step toward the construction of advanced light element co-doped metal catalysts.

Selective and controlled H2 generation upon additive-free HCOOH dehydrogenation over a Pd/NCS nanocatalyst

Although sodium formate is widely used as a conventional additive to enhance selective H2 evolution from HCOOH dehydrogenation, this leads to a waste of resources and an increase in the cost of H2 production. For this reason, N-doped carbon nanospheres with abundant graphitic C/N have been designed to enrich the electron cloud density of the Pd atom for improving its catalytic activity in H2 generation upon additive-free HCOOH dehydrogenation. Herein, we have synthesized N-doped carbon nanosphere-stabilized Pd nanoparticles (Pd/NCSs) as high-efficiency nano-catalysts, via fixation of Pd nanoparticles onto N-doped carbon nanospheres (NCSs), for selective and controlled H2 generation upon additive-free HCOOH dehydrogenation. Pd/NCS-800 (1640 h-1) provided a 12 times larger TOF than commercial Pd/C (134 h-1) in H2 generation upon additive-free HCOOH dehydrogenation. It seemed that graphitic N/C of NCS-800 enriched the electron cloud density of the Pd atom, which was favorable for the cleavage of C-H bonds in HCOOH dehydrogenation. In addition, the selective H2 evolution from additive-free HCOOH dehydrogenation over Pd/NCS-800 is successfully controlled by adjusting the pH.

Preparation and Testing of a Palladium-Decorated Nitrogen-Doped Carbon Foam Catalyst for the Hydrogenation of Benzophenone

Catalytic activity of a palladium catalyst with a porous carbon support was prepared and tested for benzophenone hydrogenation. The selectivity and yields toward the two possible reaction products (benzhydrol and diphenylmethane) can be directed by the applied solvent. It was found that in isopropanol, the prepared support was selective towards diphenylmethane with high conversion (99% selectivity and 99% benzophenone conversion on 323 K after 240 min). This selectivity might be explained by the presence of the incorporated structural nitrogens in the support.

Catalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions

Alloying has long been used as a promising methodology to improve the catalytic performance of metallic materials. In recent years, the field of alloy catalysis has made remarkable progress with the emergence of a variety of novel alloy materials and their functions. Therefore, a comprehensive disciplinary framework for catalytic chemistry of alloys that provides a cross-sectional understanding of the broad research field is in high demand. In this review, we provide a comprehensive classification of various alloy materials based on metallurgy, thermodynamics, and inorganic chemistry and summarize the roles of alloying in catalysis and its principles with a brief introduction of the historical background of this research field. Furthermore, we explain how each type of alloy can be used as a catalyst material and how to design a functional catalyst for the target reaction by introducing representative case studies. This review includes two approaches, namely, from materials and reactions, to provide a better understanding of the catalytic chemistry of alloys. Our review offers a perspective on this research field and can be used encyclopedically according to the readers' individual interests.

Modification of Pd Nanoparticles with Lower Work Function Elements for Enhanced Formic Acid Dehydrogenation and Trichloroethylene Dechlorination

Catalytic degradation of halogenated contaminants by palladium (Pd) is a promising technology for environmental remediation. However, the low utilization of H by Pd catalyst and its easy poisoning prevent its applications. Here, low work function elements (B or Ag) were incorporated into Fe@C-supported Pd nanoparticles (NPs) to alter their crystalline structure and induce electronic effects, addressing these issues. The Pd mass-normalized dechlorination rates of trichloroethylene (TCE) by Fe@C-Pd-B and Fe@C-Pd-Ag were 51 and 59 times higher than that of unmodified Fe@C-Pd, respectively. The H utilization efficiency of Fe@C-Pd-B and Fe@C-Pd-Ag was 5.4 and 7.2 times higher than that of unmodified Fe@C-Pd, respectively. Various characterizations suggest that the B or Ag incorporation induced the charge redistribution and elevated the electron density of Pd atoms, resulting in the enhanced formic acid (FA) dehydrogenation and TCE dechlorination. Although the Ag incorporation presented a relatively higher H utilization due to the suppressed combination of H and accumulation of unsaturated hydrocarbons (i.e., C₂H₄), the Fe@C-Pd-Ag was easily deactivated. In contrast, the B incorporation enabled the Pd NPs with a good stability. These findings can guide the rational design of robust Pd-based catalysts for efficient and selective FA dehydrogenation and chlorinated contaminant degradation.

Efficient and Controlled H2 Release from Sodium Formate

Sodium formate (SF) has been used for a long time as a technological additive for H2 release from the dehydrogenation of formic acid . Formic acid is often synthesized from...

Mesoporous Noble Metal-Metalloid/Nonmetal Alloy Nanomaterials: Designing Highly Efficient Catalysts

Mesoporous metals have received increasing attention in catalysis and related applications because of their novel physicochemical properties and functional geometric features. Control of multicomponent compositions and crystalline structures of mesoporous metals is critical for their applications. Recently, mesoporous metals have gradually expanded from traditional metal-metal alloys to metal-metalloid/nonmetal alloys with random solids and/or ordered intermetallics. As new, highly efficient nanocatalysts, mesoporous metal-metalloid/nonmetal alloys not only increase the utilization efficiency of precious noble metals and accelerate electron/mass transfer but also introduce new functions and optimize the surface electronic structure of metal sites, all of which enhance their catalytic activity and stability and tune their catalytic selectivity. In this Perspective, we focus on the latest developments in this area, including the findings from our group regarding the rational design and targeted synthesis of mesoporous noble metal-metalloid/nonmetal alloy nanocatalysts. We summarize the current synthetic strategies for mesoporous noble metal-metalloid/nonmetal alloys and discuss key effects of crystalline mesoporosity and metalloid/nonmetal alloys in enhancing catalytic performances of noble metal catalysts. We also describe the current bottlenecks and major challenges to explore further directions in synthesis and applications of mesoporous noble metal-metalloid/nonmetal alloys.

Strong Metal-Support Interaction for 2D Materials: Application in Noble Metal/TiB2 Heterointerfaces and their Enhanced Catalytic Performance for Formic Acid Dehydrogenation

Strong metal-support interaction (SMSI) is a phenomenon commonly observed on heterogeneous catalysts. Here, direct evidence of SMSI between noble metal and 2D TiB₂ supports is reported. The temperature-induced TiB₂ overlayers encapsulate the metal nanoparticles, resulting in core-shell nanostructures that are sintering-resistant with metal loadings as high as 12.0 wt%. The TiO_x -terminated TiB₂ surfaces are the active sites catalyzing the dehydrogenation of formic acid at room temperature. In contrast to the trade-off between stability and activity in conventional SMSI, TiB₂ -based SMSI promotes catalytic activity and stability simultaneously. By optimizing the thickness and coverage of the overlayer, the Pt/TiB₂ catalyst displays an outstanding hydrogen productivity of 13.8 mmol g^-1 _cat h^-1 in 10.0 m aqueous solution without any additive or pH adjustment, with >99.9% selectivity toward CO₂ and H₂ . Theoretical studies suggest that the TiB₂ overlayers are stabilized on different transition metals through an interplay between covalent and electrostatic interactions. Furthermore, the computationally determined trends in metal-TiB₂ interactions are fully consistent with the experimental observations regarding the extent of SMSI on different transition metals. The present research introduces a new means to create thermally stable and catalytically active metal/support interfaces for scalable chemical and energy applications.

Electrophilicity in heterogeneous catalysis: role of surface and sub-surface modification

Surface and sub-surface modification can play a significant role in improving the catalytic activity in designed systems.

Interstitial and substitutional light elements in transition metals for heterogeneous catalysis

The addition of foreign element dopants to monometallic nanoparticle catalysts is of great importance in industrial applications. Both substitutional and interstitial doping of pure metallic phases can give profound effects such as altering electronic and transport properties, lattice parameters, phase transitions, and consequently various physicochemical properties. For transition metal catalysts, this often leads to changes in catalytic activity and selectivity. This article provides an overview of the recent developments regarding the catalytic properties and characterisation of such systems. In particular, the structure-activity relationship for a number of important chemical reactions is summarised and the future prospects of this area are also explored.

Ternary metal-metalloid-nonmetal alloy nanowires: a novel electrocatalyst for highly efficient ethanol oxidation electrocatalysis

We report rational design and syntheses of ternary noble metal-metalloid-nonmetal alloy nanowires (NWs) as a novel electrocatalyst for electrochemical ethanol oxidation reaction (EOR). This novel electrocatalyst is formed in an aqueous solution via anisotropic nucleation and growth of ternary PdBP alloy NWs along assembled cylinder template of Plurolic F127 on a nitrogen-functionalized graphene support (denoted as PdBP NWs@N-G). We find that uniformly alloying B and P intrinsically modulates the electronic states of Pd catalyst and also introduces new functions into the catalyst, while NW structure supported on the N-G exposes more electrocatalytic active sites and accelerates electron/mass transfers. Such add-in synergies of PdBP NWs@N-G kinetically facilitate the removal and/or further oxidation of CO-based poisoning intermediates, thus remarkably enhancing the electrocatalytic EOR performance. They exhibit a high mass activity of 4.15 A mg_Pd^-1 and superior cycling and chronoamperometric stability for electrocatalytic EOR, much better than previously reported monometallic Pd-based nanocatalysts. More interestingly, this design strategy can be easily extended to develop more sophisticated NWs catalysts with more compositions (for example quaternary PdCuBP NWs@N-G) that further tunes the electronic and bifuntional effects for various desired catalysis and electrocatalysis.

Anchoring Pd-nanoparticles on dithiocarbamate- functionalized SBA-15 for hydrogen generation from formic acid

Hydrogen (H₂) generation from natural biological metabolic products has remained a huge challenge for the energy arena. However, designing a catalytic system with complementary properties including high surface area, high loading, and easy separation offers a promising route for efficient utilization of nanoreactors for prospective H₂ suppliers to a fuel cell. Herein, selective dehydrogenation of formic acid (FA) as a natural biological metabolic product to H₂ and CO₂ gas mixtures has been studied by supporting ultrafine palladium nanoparticles on organosulfur-functionalized SBA-15 nanoreactor under ultrasonic irradiation. The effects of the porous structure as a nanoreactor, and organosulfur groups, which presented around the Pd due to their prominent roles in anchoring and stabilizing of Pd NPs, studied as a superior catalyst for selective dehydrogenation of FA. Whole catalytic systems were utilized in ultrasonic irradiation in the absence of additives to provide excellent TOF/TON values. It was found that propose catalyst is a greener, recyclable, and more suitable option for the large-scale application and provide some new insights into stabilization of ultra-fine metal nanoparticle for a variety of applications.

B-Doped PdRu nanopillar assemblies for enhanced formic acid oxidation electrocatalysis

Adjusting the morphology and composition of Pd-based materials is a promising strategy to improve their performance for the electrocatalytic formic acid oxidation reaction (FAOR). In this work, we report the preparation of B-doped PdRu nanopillar assemblies (B-PdRu NPAs) by a two-step method using NaBH4 as the boron dopant. On combining the hyper-branched structure and the multi-component synergistic effect, B-PdRu NPAs achieve a high mass activity of 1.09 mA μg-1Pd for the FAOR and retain 73.19% of the initial activity after 500 cycles, which is superior to undoped counterparts. The proposed synthesis strategy provides a simple method for the synthesis of metal-nonmetal nanomaterials with desired composition and design structure for electrocatalytic fields.

Unveiling Synergistic Effects of Interstitial Boron in Palladium-Based Nanocatalysts for Ethanol Oxidation Electrocatalysis

Alloying is one of the most promising routes for tuning the physicochemical properties of noble metal-based nanocatalysts and thus improving their (electro)catalytic performance. Despites numerous achievements, bimetallic and trimetallic nanoalloys have still been thoroughly studied for the past two decades. In this study, metalloid boron (B) was alloyed within palladium (Pd)-based nanocatalysts to promote the electrochemical ethanol oxidation reaction (EOR) in alkaline media. The optimum PdCuB nanocatalyst exhibited remarkable electrochemical EOR activity (5.83 A mg_Pd^-1) and good operation stability (both cycling and chronoamperometric studies). Mechanistic studies in both pure KOH and a KOH/ethanol mixture attributed superior EOR performance to positive synergistic effects of B in Pd-based nanocatalysts that kinetically accelerated the removal of poisoning ethoxy intermediates (the rate-determining step of EOR). They included (i) an electronic effect that changed the electronic structure of Pd and thus weakened the adsorption of poisoning ethoxy intermediates, (ii) a bifunctional effect that facilitated the adsorption of OH_ads and thus kinetically accelerated the further oxidation of poisoning intermediates, and (iii) a structural effect in which smaller B interstitially inserted into Pd-based nanocrystals and thus suppressed the physical Ostwald ripening processes.

Ternary Palladium-Boron-Phosphorus Alloy Mesoporous Nanospheres for Highly Efficient Electrocatalysis

Alloying palladium (Pd) catalysts with various metalloid and nonmetal elements can improve their catalytic performance in different chemical reactions. However, current nanosynthesis methods can only generate Pd alloys containing one metalloid or nonmetal, which limits the types of element combinations that may be used to improve Pd-based nanocatalysts. Herein, we report a simple soft-templating synthetic strategy to co-alloy Pd with the metalloid boron (B) and the nonmetal phosphorus (P) to generate ternary PdBP mesoporous nanospheres (MSs) with three-dimensional dendritic frameworks. We use a one-step aqueous synthesis method where dimethylamine borane and sodium hypophosphite serve as the B and P sources, respectively, as well as the co-reducing agents to drive the nucleation and growth of ternary PdBP alloy on a sacrificial dioctadecyldimethylammonium chloride template. The concentration of metalloid to nonmetal and the diameters of dendritic MSs can be tailored. The synthetic protocol is also extended to other multicomponent PdMBP alloy MSs to generate different types of dendritic mesoporous frameworks. Boron and phosphorus are known to accelerate the kinetics of the electrochemical oxygen reduction reaction (ORR) and alcohol oxidation reactions (AORs), because their alloys promote the decomposition of oxygen-containing intermediates on Pd surfaces. The dendritic mesoporous morphology of the ternary PdBP MSs also accelerates electron/mass transfer and exposes numerous active sites, enabling better performance in the ORR and AORs. Extending the surfactant-templating synthetic route to multiple types of elements will enable the generation of libraries of multicomponent metal-metalloid-nonmetal alloy nanostructures with functions that are suitable for various targeted applications.

Investigation on the enhanced catalytic activity of a Ni-promoted Pd/C catalyst for formic acid dehydrogenation: effects of preparation methods and Ni/Pd ratios

In this present work, we studied the effects of preparation methods and Ni/Pd ratios on the catalytic activity of a Ni-promoted Pd/C catalyst for the formic acid dehydrogenation (FAD) reaction. Two catalysts prepared by co-impregnation and sequential impregnation methods showed completely different Pd states and catalytic activities. As the sequentially impregnated catalyst showed better activity than the co-impregnated catalyst, the sequentially impregnated catalyst was investigated further to optimize the ratio of Ni/Pd. The highest catalytic activity for the FAD reaction was obtained over the seq-impregnated catalyst having a 1 : 1.3 molar ratio of Pd : Ni. The results of X-ray diffraction (XRD) and transmission electron microscopy (TEM) showed that small particle size is one factor improving the catalytic activity, while those of X-ray photoelectron spectroscopy (XPS) and X-ray adsorption near edge structure (XANES) indicate that the electronic modification of Pd to a positively charged ion is another factor. Thus, it can be concluded that the enhanced catalytic activity of the Ni-promoted Pd/C catalyst is attributed to the role of pre-impregnated Ni in facilitating the activity of Pd by constraining the particle growth and withdrawing an electron from Pd.

In this present work, we studied the effects of preparation methods and Ni/Pd ratios on the catalytic activity of a Ni-promoted Pd/C catalyst for the formic acid dehydrogenation (FAD) reaction.

Mesoporous Silica Supported Pd-MnOx Catalysts with Excellent Catalytic Activity in Room-Temperature Formic Acid Decomposition

For the application of formic acid as a liquid organic hydrogen carrier, development of efficient catalysts for dehydrogenation of formic acid is a challenging topic, and most studies have so far focused on the composition of metals and supports, the size effect of metal nanoparticles, and surface chemistry of supports. Another influential factor is highly desired to overcome the current limitation of heterogeneous catalysis for formic acid decomposition. Here, we first investigated the effect of support pore structure on formic acid decomposition performance at room temperature by using mesoporous silica materials with different pore structures such as KIE-6, MCM-41, and SBA-15, and achieved the excellent catalytic activity (TOF: 593 h⁻¹) by only controlling the pore structure of mesoporous silica supports. In addition, we demonstrated that 3D interconnected pore structure of mesoporous silica supports is more favorable to the mass transfer than 2D cylindrical mesopore structure, and the better mass transfer provides higher catalytic activity in formic acid decomposition. If the pore morphology of catalytic supports such as 3D wormhole or 2D cylinder is identical, large pore size combined with high pore volume is a crucial factor to achieve high catalytic performance.

Small Addition of Boron in Palladium Catalyst, Big Improvement in Fuel Cell's Performance: What May Interfacial Spectroelectrochemistry Tell?

Direct formic acid fuel cell (DFAFC) with Pd-based catalyst anode is a promising energy converter to power portable devices. However, its commercialization is entangled with insufficient activity and poor stability of existing anode catalysts. Here we initially report that a DFAFC using facilely synthesized Pd-B/C with ca. 6 at. % B doping as the anode catalyst yields a maximum output power density of 316 mW cm(-2) at 30 °C, twice that with a same DFAFC using otherwise the state-of-the-art Pd/C. More strikingly, at a constant voltage of 0.3 V, the output power of the former cell is ca. 9 times as high as that of the latter after 4.5 h of continuous operation. In situ attenuated total reflection infrared spectroscopy is applied to probe comparatively the interfacial behaviors at Pd-B/C and Pd/C in conditions mimicking those for the DFAFC anode operation, revealing that the significantly improved cell performance correlates well with a substantially lowered CO accumulation at B-doped Pd surfaces.

Mechanistic insights into the catalytic elimination of tar and the promotional effect of boron on it: first-principles study using toluene as a model compound

The incorporation of a monolayer subsurface B into the Ni catalyst results in a corrugated Ni top surface and the activation of toluene is significantly promoted on B–Ni.

Towards more accurate prediction of activation energies for polyalcohol dehydrogenation on transition metal catalysts in water

Polyols may be associated to a large catalytic reaction network. Brønsted–Evans–Polanyi (B.E.P.) relationships aim to easily predict activation barriers from reaction energies. Acting as a filter, such methods enable to quickly screen all the potential reaction intermediates and products.

Theoretical insights into the promotion effect of subsurface boron for the selective hydrogenation of CO to methanol over Pd catalysts

CO hydrogenation to methanol and methane on both Pd(211) and subsurface boron-modified Pd(211) are studied based on density functional theory calculations.