Impact of Gold Nanoparticle Stabilizing Ligands on the Colloidal Catalytic Reduction of 4-Nitrophenol

The Valence-Dependent Activity of Colloidal Molecules as Ice Recrystallization Inhibitors

Inspired by advances in cryopreservation techniques, which are essential for modern biomedical applications, there is a special interest in the ice recrystallization inhibition (IRI) of the antifreeze protein (AFPs) mimics. There are in-depth studies on synthetic materials mimicking AFPs, from simple molecular structure levels to complex self-assemblies. Herein, we report the valence-dependent IRI activity of colloidal organic molecules (CMs). The CMs were prepared through polymerization-induced particle-assembly (PIPA) of the ABC-type triblock terpolymer of poly(acryloxyethyl trimethylammonium chloride)-b-poly(benzyl acrylate)-b-poly(diacetone acrylamide) (PATAC-b-PBzA-b-PDAAM) at high monomer conversions. Stabilized by the cationic block of PATAC, the strong intermolecular H-bonding and incompatibility of the PDAAM block with PBzA contributed to the in situ formation of Janus particles (AX1) beyond the initial spherical seed particles (AX0), as well as the high valency clusters of linear AX2 and trigonal AX3. Their distribution was controlled mainly by the polymerization degrees (DPs) of PATAC and PDAAM blocks. IRI activity results of the CMs suggest that the higher fraction of AX1 results in the better IRI activity. Increasing the fraction of AX1 from 27% to 65% led to a decrease of the mean grain size from 39.8% to 10.9% and a depressed growth rate of ice crystals by 58%. Moreover, by replacing the PDAAM block with the temperature-responsive one of poly(N-isopropylacrylamide) (PNIPAM), temperature-adjustable IRI activity was observed, which is well related to the reversible transition of AX0 to AX1, providing a new idea for the molecular design of amphiphilic polymer nanoparticle-based IRI activity materials.

Unlocking the potential of Opuntia species mucilage in chemistry

Herein, we describe a detailed protocol to extract the mucilage from different species of the genus Opuntia spp. (i.e., Opuntia Ficus (OFi), Opuntia Dillenii (ODi) and Opuntia Robusta (ORo)). The extracted mucilage was characterized by NMR, FTIR-ATR, HPLC, and TGA. OFi was found to have the highest phenolic content, 7.84 ± 1.93 mg catechol/g mucilage. The mucilage from the three species were characterized by having a high content of monosaccharides, being mannose and glucose the most abundant components (ca. 48-73 % and 23-35 %, respectively). In the context of biomass revalorization, the mucilage was proven to serve as a reducing and stabilizing agent in the synthesis of gold nanoparticles (AuNP/mucilage). The synthesis was optimized with a mucilage concentration of 2 mg/mL using 12.5 μL of KAuCl4 and was carried out at 80 °C for 90 min. This protocol afforded spherical nanoparticles with an average size of 9.7 ± 4.0 nm that were stable for at least 14 days, as demonstrated by TEM. Synthesized AuNP/mucilage was evaluated as a plasmonic catalyst for the reduction of 4-nitrophenol as model reaction, showing a considerable enhancement in its kapp of 97 % under white light and a decrease of 24.8 % in its activation energy.

Hydride-doped coinage metal superatoms and their catalytic applications

Superatomic constructs have been identified as a critical component of future technologies. The isolation of coinage metal superatoms relies on partially reducing metallic frameworks to accommodate the mixed valent state required to generate a superatom. Controlling this reduction requires careful consideration in reducing the agent, temperature, and the ligand that directs the self-assembly process. Hydride-based reducing agents dominate the synthetic wet chemical routes to coinage metal clusters. However, within this category, a unique subset of superatoms that retain a hydride/s within the nanocluster post-reduction have emerged. These stable constructs have only recently been characterized in the solid state and have highly unique structural features and properties. The difficulty in identifying the position of hydrides in electron-rich metallic constructs requires the combination and correlation of several analytical methods, including ESI-MS, NMR, SCXRD, and DFT. This text highlights the importance of NMR in detecting hydride environments in these superatomic systems. Added to the complexity of these systems is the dual nature of the hydride, which can act as metallic hydrogen in some cases, resulting in entirely different physical properties. This review includes all hydride-doped superatomic nanoclusters emphasizing synthesis, structure, and catalytic potential.

Amphiphilic Dendronized Copolymer-Encapsulated Au, Ag and Pd Nanoparticles for Catalysis in the 4-Nitrophenol Reduction and Suzuki-Miyaura Reactions

The branched structures of dendronized polymers can provide good steric stabilization for metal nanoparticle catalysts. In this work, an amphiphilic dendronized copolymer containing hydrophilic branched triethylene glycol moieties and hydrophobic branched ferrocenyl moieties is designed and prepared by one-pot ring-opening metathesis polymerization, and is used as the stabilizer for metal (Au, Ag and Pd) nanoparticles. These metal nanoparticles (Au nanoparticles: 3.5 ± 3.0 nm; Ag nanoparticles: 7.2 ± 4.0 nm; Pd nanoparticles: 2.5 ± 1.0 nm) are found to be highly active in both the 4-nitrophenol reduction and Suzuki-Miyaura reactions. In the 4-nitrophenol reduction, Pd nanoparticles have the highest catalytic ability (TOF: 2060 h-1). In addition, Pd nanoparticles are also an efficient catalyst for Suzuki-Miyaura reactions (TOF: 1980 h-1) and possess good applicability for diverse substrates. The amphiphilic dendronized copolymer will open a new door for the development of efficient metal nanoparticle catalysts.

Catalytic innovations: Improving wastewater treatment and hydrogen generation technologies

The effective reduction of hazardous organic pollutants in wastewater is a pressing global concern, necessitating the development of advanced treatment technologies. Pollutants such as nitrophenols and dyes, which pose significant risks to both human and aquatic health, making their reduction particularly crucial. Despite the existence of various methods to eliminate these pollutants, they are not without limitations. The utilization of nanomaterials as catalysts for chemical reduction exhibits a promising alternative owing to their distinguished catalytic activity and substantial surface area. For catalytically reducing the pollutants NaBH4 has been utilized as a useful source for it because it reduces the pollutants quiet efficiently and it also releases hydrogen gas as well which can be used as a source of energy. This paper provides a comprehensive review of recent research on different types of nanomaterials that function as catalysts to reduce organic pollutants and also generating hydrogen from NaBH4 methanolysis while also evaluating the positive and negative aspects of nanocatalyst. Additionally, this paper examines the features effecting the process and the mechanism of catalysis. The comparison of different catalysts is based on size of catalyst, reaction time, rate of reaction, hydrogen generation rate, activation energy, and durability. The information obtained from this paper can be used to steer the development of new catalysts for reducing organic pollutants and generation hydrogen by NaBH4 methanolysis.

Fluorescent Noncovalent Organic Framework for Supporting Gold Nanoparticles as Heterogeneous Catalyst with Merits of Easy Detection and Recycle

A porous noncovalent organic framework with AIE effect is designed and synthesized as the support for gold nanoparticles (AuNPs). The framework is fabricated through the electrostatic complexation between carboxymethyl cellulose and tetraphenylethene-containing ammonium surfactant, which can complex AuNPs via the noncovalent interactions to offer a heterogeneous catalyst. Compared to the covalent modification on cellulose, this noncovalent framework gains superiorities in the catalyst synthesis and the size control of AuNPs. The AIE property and water-insolubility allow such heterogeneous catalysts to be easily detected, separated, and recycled, opening a new pathway for the reduction of nitrobenzene compounds and some dye compounds in aqueous conditions, which present the features of green chemistry. The use of cellulose for developing new heterogeneous metal catalysts, especially in a noncovalent way, would promote the value-added utilization of cellulose. This work provides a design strategy for gaining heterogeneous metal catalysts by taking advantage of natural bioresources.

A Mechanism Underpinning the Bioenergetic Metabolism-Regulating Function of Gold Nanocatalysts

Bioenergetic deficits are known to be significant contributors to neurodegenerative diseases. Nevertheless, identifying safe and effective means to address intracellular bioenergetic deficits remains a significant challenge. This work provides mechanistic insights into the energy metabolism-regulating function of colloidal Au nanocrystals, referred to as CNM-Au8, that are synthesized electrochemically in the absence of surface-capping organic ligands. When neurons are subjected to excitotoxic stressors or toxic peptides, treatment of neurons with CNM-Au8 results in dose-dependent neuronal survival and neurite network preservation across multiple neuronal subtypes. CNM-Au8 efficiently catalyzes the conversion of an energetic cofactor, nicotinamide adenine dinucleotide hydride (NADH), into its oxidized counterpart (NAD+ ), which promotes bioenergy production by regulating the intracellular level of adenosine triphosphate. Detailed kinetic measurements reveal that CNM-Au8-catalyzed NADH oxidation obeys Michaelis-Menten kinetics and exhibits pH-dependent kinetic profiles. Photoexcited charge carriers and photothermal effect, which result from optical excitations and decay of the plasmonic electron oscillations or the interband electronic transitions in CNM-Au8, are further harnessed as unique leverages to modulate reaction kinetics. As exemplified by this work, Au nanocrystals with deliberately tailored structures and surfactant-free clean surfaces hold great promise for developing next-generation therapeutic agents for neurodegenerative diseases.

Photo-Induced Self-assembly of Copolymer-Capped Nanoparticles into Colloidal Molecules

Colloidal molecules (CMs) are precisely defined assemblies of nanoparticles (NPs) that mimic the structure of real molecules, but externally programming the precise self-assembly of CMs is still challenging. In this work, we show that the photo-induced self-assembly of complementary copolymer-capped binary NPs can be precisely controlled to form clustered ABx or linear (AB)y CMs at high yield (x is the coordination number of NP-Bs, and y is the repeating unit number of AB clusters). Under UV light irradiation, photolabile p-methoxyphenacyl groups of copolymers on NP-A*s are converted to carboxyl groups (NP-A), which react with tertiary amines of copolymers on NP-B to trigger the directional NP bonding. The x value of ABx can be precisely controlled between 1 and 3 by varying the irradiation duration and hence the amount of carboxyl groups generated on NP-As. Moreover, when NP-A* and NP-B are irradiated after mixing, the assembly process generates AB clusters or linear (AB)y structures with alternating sequence of the binary NPs. This assembly approach offers a simple yet non-invasive way to externally regulate the formation of various CMs on demand without the need of redesigning the surface chemistry of NPs for use in drug delivery, diagnostics, optoelectronics, and plasmonic devices.

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K+ and Na+ containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of ∼2-3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH4 as a model reaction, in which they outperform even the benchmark "naked" Au NPs electrostatically stabilized by excess NaBH4. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts.

Polyethylenimine as a Versatile Simultaneous Reducing and Stabilizing Agent Enabling One-Pot Synthesis of Transition-Metal Nanoparticles: Fundamental Aspects and Practical Implications

The large surface area of metallic nanoparticles provides them with particular optical, chemical, and biological properties, accordingly enabling their use in a wide array of applications. In this regard, facile and fast synthetic approaches are desirable for ready-to-use functional materials. Following early investigations focused on the direct synthesis of polymer-coated gold nanoparticles, we herein demonstrate that such a strategy can be used to manufacture different types of d-block transition-metal nanoparticles via a one-pot method in aqueous media and mild temperature conditions. Gold (Au3+), palladium (Pd2+), and silver (Ag+) ions could be reduced using only polyethylenimine (PEI) or PEI derivatives acting simultaneously as a reducing and stabilizing agent and without the aid of any other external agent. The process gave rise, for instance, to Pd urchin-like nanostructures with a large surface area which confers to them outstanding catalytic performance compared to AuNPs and AgNPs produced using the same strategy. The polymer-stabilized AgNPs were demonstrated to be biocide against a variety of microorganisms, although AuNPs and PdNPs do not hold such an attribute at least in the probed concentration range. These findings may provide significant advances toward the practical, facile, and ready-to-use manufacturing of transition-metal nanoparticles for a myriad of applications.

Boosting plasmon-enhanced electrochemistry by in situ surface cleaning of plasmonic nanocatalysts

The application of surface plasmons in heterogeneous catalysis has attracted widespread attention due to their promising potential for harvesting solar energy. The effect of surface adsorbates on catalysts has been well documented in many traditional reactions; nonetheless, their role in plasmonic catalysis has been rarely studied. In this study, an in situ electrochemical surface cleaning strategy is developed and the influence of surface adsorbates on plasmon-enhanced electrochemistry is investigated. Taking Au nanocubes as an example, plasmonic catalysts with clean surfaces are obtained by Cu2O coating and in situ electrochemical etching. During this process, the surface adsorbates of Au nanocubes are removed together with the Cu2O shells. The Au nanocubes with clean surfaces exhibit remarkable performance in plasmon-enhanced electrooxidation of glucose and an enhancement of 445% is demonstrated. The Au NCs with clean surfaces can not only provide more active sites but also avoid halides as hole scavengers, and therefore, the efficient utilization of hot holes by plasmonic excitation is achieved. This process is also generalized to other molecules and applied in electrochemical sensing with high sensitivity. These results highlight the critical role of surface adsorbates in plasmonic catalysis and may forward the design of efficient plasmonic catalysts for plasmon-enhanced electrochemistry.

Ultrathin covalent organic overlayers on metal nanocrystals for highly selective plasmonic photocatalysis

Metal nanoparticle-organic interfaces are common but remain elusive for controlling reactions due to the complex interactions of randomly formed ligand-layers. This paper presents an approach for enhancing the selectivity of catalytic reactions by constructing a skin-like few-nanometre ultrathin crystalline porous covalent organic overlayer on a plasmonic nanoparticle surface. This organic overlayer features a highly ordered layout of pore openings that facilitates molecule entry without any surface poisoning effects and simultaneously endows favourable electronic effects to control molecular adsorption-desorption. Conformal organic overlayers are synthesised through the plasmonic oxidative activation and intermolecular covalent crosslinking of molecular units. We develop a light-operated multicomponent interfaced plasmonic catalytic platform comprising Pd-modified gold nanoparticles inside hollow silica to achieve the highly efficient and selective semihydrogenation of alkynes. This approach demonstrates a way to control molecular adsorption behaviours on metal surfaces, breaking the linear scaling relationship and simultaneously enhancing activity and selectivity.

PtAg18 superatoms costabilized by phosphines and halides: synthesis, structure, and catalysis

Reported herein is the facial synthesis, molecular structure, and catalysis of a Pt/Ag nanocluster costabilized by organic ligands of phosphines and inorganic ligands of chlorides. The nanocluster with molecular formula of [PtAg18(dppp)6Cl8](SbF6)2 has been obtained facilely by the one pot method. The structure of the cluster could be anatomized as the stabilizaiton of PtAg12-centered icosahedral core by the metalloligand of dppp-Ag-Cl, in which Cl- not only caps the surface Ag atoms but also binds the core and surface motifs. Featuring eight free electrons in its structure, the cluster exhibits high stability. More interestingly, the exposure of surface metal sites endows the cluster with counterintutively  high catalytic activity in hydrogenation reactions.

A Highly NIR Emissive Cu16 Pd1 Nanocluster

The construction of stable copper nanoclusters (Cu-NCs) with near-infrared (NIR) emission that can be used for catalysis is highly desired, yet remains a challenge. Herein, an atomically precise bimetallic Cu/Pd NC with a molecular formula of Cu16 Pd1 L10 (PPh3 )2 (Pz)6 (Pz = 3,5-(CF3 )2 Pyrazolate, L = 4-CH3 OPhC≡C- ), abbreviated as Cu16 Pd1 , is synthesized. Single-crystal X-ray crystallographic analysis of Cu16 Pd1 reveals a Cu10 Pd1 kernel with pseudo-gyroelongated square bipyramid confirmation surrounded by other 6 Cu(I) ions and protected ligands. Interestingly, it exhibits strong NIR emission with the highest photoluminescence quantum yield (PLQY) among all the Cu NCs/Cu alloys (λem  > 800 nm) in the solid-state, and also displays NIR emission in solution. Experimental results and theoretical calculations suggest that the impressive NIR emission is attributed to abundant supramolecular interactions in the solid-state, including intramolecular metal-metal and intermolecular interactions. Of note, the bimetallic Cu16 Pd1 can catalyze the reduction of 4-nitrophenol. This work provides a novel method for synthesizing Cu/Pd NCs and reminds that the less studied Cu/Pd NC can serve as outstanding luminescent material, which is seldom noticed in atomically precise nanoclusters.

A study on rapid and stable catalytic reduction of 4-nitrophenol by 2-hydroxyethylamine stabilized Fe3O4@Pt and its kinetic factors

The successful development of efficient and stable catalysts for 4-NP reduction reactions is beneficial to the environment and ecology. Fe3O4@Pt exhibits excellent catalytic performance for 4-NP reduction reaction due to the synergistic effect between Fe and Pt. But its structure and catalytic performance are extremely unstable. Here, we utilized the small-scale organic compound 2-hydroxyethylamine as surfactant to construct a stable composite nanomaterial. Then investigated the influence of monochromatic light (650 nm, 808 nm and 980 nm) and temperature on the kinetics of 4-NP reduction reaction by 2-hydroxyethylamine stabilized Fe3O4@Pt. The results indicate that both temperature and monochromatic light radiation can affect kinetic regulation. Increasing temperature can promote the catalytic rate, while monochromatic light radiation can induce agglomeration and inhibit the catalytic rate. This study opens up a new way for developing and regulating catalysts for heterogeneous catalysis reactions.

Cationic Polymer Coating Increases the Catalytic Activity of Gold Nanoparticles toward Anionic Substrates

Organic coatings on catalytic metal nanoparticles (NPs) typically hinder their activity due to the blocking of active sites. Therefore, considerable effort is made to remove organic ligands when preparing supported NP catalytic materials. Here, cationic polyelectrolyte coatings are shown to increase the catalytic activity of partially embedded gold nanoislands (Au NIs) toward transfer hydrogenation and oxidation reactions with anionic substrates compared to the activity of identical but uncoated Au NIs. Any potential steric hindrance caused by the coating is countered by a decrease in the activation energy of the reaction by half, resulting in overall enhancement. The direct comparison to identical but uncoated NPs isolates the role of the coating and provides conclusive evidence of enhancement. Our findings show that engineering the microenvironment of heterogeneous catalysts, creating hybrid materials that cooperatively interact with the reactants involved, is a viable and exciting path to improving their performance.

Remarkably and stable catalytic activity in reduction of 4-nitrophenol by sodium sesquicarbonate-supporting Fe2O3@Pt

Reasonable design of bimetallic nanomaterials with support is beneficial to improve catalytic performance. This work reports a new kind of sodium sesquicarbonate-supporting Fe₂O₃@Pt via etching Fe₃O₄@Pt@SiO₂, which exhibits highly efficient and stable catalytic reduction performance towards 4-NP. Sodium sesquicarbonate-supporting Fe₂O₃@Pt has an interconnected one-dimensional network structure that provides sufficient channels for mass transfer. At the same time, a large amount of Fe₂O₃@Pt is exposed on its surface, which hinders the aggregation of pt clusters and Fe₂O₃ nanoparticles, and facilitates the direct contact of Fe₂O₃@Pt reaction sites with reactant molecules, thus improving the catalytic rate of 4-NP reduction reaction. Moreover, the introduction of non-metallic Fe can not only reduce the consumption of precious metal Pt, but also improve the catalytic efficiency due to the synergistic effect. This study opens up a new avenue to develop robust catalysts for heterogeneous catalytic reactions.

Synergistic Role of Temperature and Salinity in Aggregation of Nonionic Surfactant-Coated Silica Nanoparticles

The adsorption of nonionic surfactants onto hydrophilic nanoparticles (NPs) is anticipated to increase their stability in aqueous medium. While nonionic surfactants show salinity- and temperature-dependent bulk phase behavior in water, the effects of these two solvent parameters on surfactant adsorption and self-assembly onto NPs are poorly understood. In this study, we combine adsorption isotherms, dispersion transmittance, and small-angle neutron scattering (SANS) to investigate the effects of salinity and temperature on the adsorption of pentaethylene glycol monododecyl ether (C₁₂E₅) surfactant on silica NPs. We find an increase in the amount of surfactant adsorbed onto the NPs with increasing temperature and salinity. Based on SANS measurements and corresponding analysis using computational reverse-engineering analysis of scattering experiments (CREASE), we show that the increase in salinity and temperature results in the aggregation of silica NPs. We further demonstrate the non-monotonic changes in viscosity for the C₁₂E₅-silica NP mixture with increasing temperature and salinity and correlate the observations to the aggregated state of NPs. The study provides a fundamental understanding of the configuration and phase transition of the surfactant-coated NPs and presents a strategy to manipulate the viscosity of such dispersion using temperature as a stimulus.

Poly(N-2-hydroxypropylmethacrylamide)-capped gold nanoparticles as nanozymes with peroxidase-mimicking performance for the colorimetric monitoring of serum homocysteine

Recently, nanozymes based on polymer-stabilized gold nanoparticles (AuNPs) have attracted more and more attention on account of their polymer-ligands' multiple functionalization sites. However, the contribution of polymer hydrogen bonding to the catalytic activity of AuNPs has received little attention. This study designed and fabricated poly(N-2-hydroxypropylmethacrylamide)-capped AuNPs (PHPAM@AuNPs) using a hydroxyl-rich polymer as the ligand. The PHPAM@AuNPs exhibited good peroxidase-mimicking activity capable of efficiently oxidizing 3,3'5,5'-tetramethylbenzidine (TMB) with H₂O₂. The effect of PHPAM hydrogen bonding on the catalytic activity of PHPAM@AuNPs was investigated. Under peroxidase-mimicking catalysis, homocysteine introduced a notable reduction in oxidation, allowing the creation of a colorimetric method for homocysteine detection with high selectivity and sensitivity. The ultraviolet-visible absorption intensity of oxidized TMB showed a strong linear relationship with homocysteine concentration in the range of 3.0-20.0 μM (R² = 0.998), with a limit of detection of 0.4 μM. The proposed colorimetric protocol was used to monitor homocysteine in rat serum following intraperitoneal injection. This work provides a new way to refine AuNP-based nanozymes by relying on polymer-ligand hydrogen bonding. It has strong application potential in the analysis of endogenous molecules in real samples.

Ionic Liquid Functionalized Metal-Organic Framework ([DEIm][PF6]@MOF-5): Synthesis, Characterization, and Catalytic Application in the Reduction of 4-Nitrophenol

A novel, unique, highly effective, and recyclable heterogeneous catalyst, diethyl imidazolium hexafluorophosphate ionic liquid supported metal-organic framework ([DEIm][PF₆]@MOF-5), has been synthesized using a simple impregnation method at ambient temperature. Characterization of the catalyst was done through various techniques such as Fourier transform infrared (FTIR), energy dispersive X-ray, X-ray diffraction (XRD), transmission electron microscopy, scanning electron microscopy (SEM), elemental mapping, Raman spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis (TGA) analyses. The kinetic study has shown the high catalytic performance of [DEIm][PF₆]@MOF-5 for the reduction of 4-nitrophenol (NP) compared to other catalysts. The catalyst also exhibited efficient electrochemical activity toward 4-NP reduction. The catalyst was recyclable for more than seven cycles without any significant loss in its catalytic performance. The recycled catalyst was further studied using XRD, FTIR, SEM, and TGA analyses to investigate the structural changes that occurred during the reaction. The catalyst maintained its structural integrity even after seven cycles.

Gold Nanozymes: Smart Hybrids with Outstanding Applications

Nanozymes are nanostructured artificial enzymes that have attracted great attention among researchers because of their ability to mimic relevant biological reactions carried out by their natural counterparts, but with the capability to overcome natural enzymes’ drawbacks such as low thermostability or narrow substrate scope. The promising enzyme-like properties of these systems make nanozymes excellent candidates for innovative solutions in different scientific fields such as analytical chemistry, catalysis or medicine. Thus, nanozymes with different type of activities are of special interest owing to their versatility since they can reproduce several biological reactions according to the substrates and the environmental conditions. In this context, gold-based nanozymes are a representative example of multifunctional structures that can perform a great number of enzyme-like activities. In addition, the combination of gold-based materials with structures of organic and inorganic chemical nature yields even more powerful hybrid nanozymes, which enhance their activity by providing improved features. This review will carry out a deep insight into gold-based nanozymes, revisiting not only the different type of biological enzymatic reactions that can be achieved with these kinds of systems, but also structural features of some of the most relevant hybrid gold-based nanozymes described in the literature. This literature review will also provide a representative picture of the potential of these structures to solve future technological challenges.

Polymer N-Heterocyclic Carbene (NHC) Ligands for Silver Nanoparticles

Polymer N-heterocyclic carbenes (NHCs) are a class of robust surface ligands to provide superior colloidal stability for metal nanoparticles (NPs) under various harsh conditions. We report a general method to prepare polymeric NHCs and demonstrate that these polymer NHC-AgNPs are stable against oxidative etching and show high peroxidase activity. We prepared three imidazolium-terminated poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMEO₂MA) through atom-transfer radical polymerization with an imidazole-containing initiator. The imidazolium end group was further converted to NHC-Ag(I) in the presence of Ag₂O at room temperature. Polymer NHC-Ag(I) can transmetalate to AgNPs through ligand exchange at the interface of oil/water within 2 min. All the three polymers can modify metal NPs, such as AgNPs, Ag nanowires, and AuNPs, providing excellent thermal, oxidative, and chemical stabilities for AgNPs. As an example, in the presence of hydrogen peroxide, AgNPs modified by polymer NHCs were resistant against oxidative etching with a rate of ∼700 times slower than those grafted with thiolates. AgNPs modified by polymer NHCs also showed higher peroxidase activity, 4 times more active than those capped by citrate and polyvinylpyrrolidone (PVP) and 2 times more active than those with polymer thiolate. Our studies demonstrate a great potential of using polymer NHCs to stabilize metallic NPs for various applications.

Identification of the Active Species in Bimetallic Cluster Catalyzed Hydrogenation

Identification of the authentic active species of cluster catalysis is rather challenging, and direct structural evidence is quite valuable and difficult to obtain. Two "isostructural" clusters, Ag₂₅Cu₄Cl₆(dppb)₆(PhC≡C)₁₂(SO₃CF₃)₃ (1) and Ag₂₅Cu₄Cl₆H₈(dppb)₆(PhC≡C)₁₂(SO₃CF₃)₃ (2_H) (dppb is 1,4-bis(diphenylphosphine)butane), have been successfully isolated and structurally characterized. Both these clusters have a centered icosahedron Ag₁₃ core with the same peripheral composition and structure. The only difference is that 2_H has eight hydrides but 1 has none, that is, the kernels are Ag₁₃⁵⁺ and Ag₁₃H₈⁵⁺ in 1 and 2_H, respectively. The catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) as a model reaction is assessed with the two clusters. Cluster 2_H is very active with 100% yield within 2 h, whereas 1 shows a very low conversion (∼8%) under the same conditions. Interestingly, high catalytic activity was observed when 1 was converted to 2_H with the oxidation of H₂O₂ under catalytic conditions. The unprecedented transformation of a reduced nanocluster to an Ag(I)Cu(I) bimetallic cluster compound provides an excellent platform to determine the real active cluster in terms of metal cluster catalysis. The present work presents clear structural evidence that the catalytic performance of metal nanoclusters can be modulated by properly regulating the oxidation state of their constituted metal atoms.

Electrocatalytic reduction of 4-nitrophenol over Ni-MOF/NF: understanding the self-enrichment effect of H-bonds

The chemical adsorption and active sites play a key role in electrocatalysis, so Ni-MOF/nickel foam was fabricated for efficiently reducing 4-nitrophenol (4-NP) without any sacrificial agents. The coordinated water molecules induced the formation of hydrogen bonds (H-bonds) with the nitro group, contributing to the self-enrichment of 4-NP. The reaction rate reached 0.351 μmol min^-1 mg^-1. Therefore, this work provides a new insight into the H-bond effect in the field of electrocatalysis.

Ligand-free sub-5 nm platinum nanocatalysts on polydopamine supports: size-controlled synthesis and size-dictated reaction pathway selection

Noble metal nanoparticles exhibit intriguing size-dependent catalytic activities toward a plethora of important chemical reactions. A particularly interesting but rarely explored scenario is that some catalytic molecule-transforming processes may even inter-switch among multiple reaction pathways when the dimensions of a metal nanocatalyst are deliberately tuned within specific size windows. Here, we take full advantage of the adhesive surface properties of polydopamine to kinetically maneuver the surface-mediated nucleation and growth of Pt nanocrystals, which enables us to synthesize polydopamine-supported sub-5 nm Pt nanocatalysts with precisely tunable particle sizes, narrow size distributions, ligand-free clean surfaces, and uniform dispersion over the supports. The success in precisely tuning the particle size of ligand-free Pt nanocatalysts within the sub-5 nm size window provides unique opportunities for us to gain detailed, quantitative insights concerning the intrinsic particle size effects on the pathway selection of catalytic molecular transformations. As exemplified by Pt-catalyzed nitrophenol reduction by ammonia borane, catalytic transfer hydrogenation reactions may inter-switch between two fundamentally distinct bimolecular reaction pathways, specifically the Langmuir-Hinshelwood and the Eley-Rideal mechanisms, as the size of the Pt nanocatalysts varies in the sub-5 nm regime.

A cellulose nanocrystal templating approach to synthesize size-controlled gold nanoparticles with high catalytic activity

Advanced templating methods have shown precise regulation of the micro/nanostructures of inorganic catalysts. Here, on the basis of controlled self-assembly and micro-structures of cellulose nanocrystals (CNCs), a new bio-mass-mediated templating approach is proposed to control the growth of gold nanoparticles (Au NPs). The catalytic performance of the as-prepared Au NPs was evaluated using p-nitrophenol as a model pollutant. TEM, POM, zeta-potential, and rheological measurements were conducted to investigate the structure and catalytic activity of the nano-materials. By regulating the chiral nematic liquid crystal texture formed by the self-assembly of CNCs, the size of Au NPs could be adjusted at the nanoscale dimension, from 1.38 ± 0.38 nm to 4.25 ± 1.24 nm. Depending on the Au size, a high catalytic effect, namely, 98.0% conversion rate, was obtained within 30 min. The conversion rate was maintained at 97.0% even after 3-run cyclic application. Such findings demonstrate the potential of using CNCs as a bio-template to control the growth of nanomaterials.

Polymer-capped gold nanoparticles as nanozymes with improved catalytic activity for the monitoring of serum ciprofloxacin

More recently, gold nanoparticle (AuNP)-based nanozymes have become one of the burgeoning research hot topics. However, few studies have focused on these AuNP-nanozymes with polymers as ligands. A significant challenge is to reveal their catalytic mechanism and to improve their catalytic activity by changing the structures of the polymers. In this study, polyacrylamide (PAM) with different chain lengths was synthesized and used as the ligand to prepare PAM@AuNPs. The resultant nanozymes exhibited good peroxidase-like activity for catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H₂O₂). In particular, due to the electrostatic interaction between the negatively charged PAM@AuNPs and the positively charged drug, the addition of ciprofloxacin in the oxidation system induced the aggregation of PAM@AuNPs and produced more amount of reactive oxygen species, which greatly promoted the catalytic activity of PAM@AuNPs. Inspired by the attractive property, a highly selective and sensitive colorimetric assay for the monitoring of ciprofloxacin was created. A good linear relationship between the UV-Vis absorption intensity of PAM@AuNPs-TMB-H₂O₂ at 650 nm wavelength and the ciprofloxacin concentration was observed ranging from 1.0 μM to 12.0 μM (R² = 0.998), providing the detection limit of 0.5 μM. The ciprofloxacin metabolism was further studied in rats. It reveals great potential of polymer protected AuNP-nanozymes in practical drug analysis.

Temperature-Dependent Activity of Gold Nanocatalysts Supported on Activated Carbon in Redox Catalytic Reactions: 5-Hydroxymethylfurfural Oxidation and 4-Nitrophenol Reduction Comparison

In this study, the temperature-dependent activity of Au/AC nanocatalysts in redox catalytic reactions was investigated. To this end, a series of colloidal gold catalysts supported on activated carbon and titania were prepared by the sol immobilization method employing polyvinyl alcohol as a polymeric stabilizer at different hydrolysis degrees. The as-synthesized materials were widely characterized by spectroscopic analysis (XPS, XRD, and ATR-IR) as well as TEM microscopy and DLS/ELS measurements. Furthermore, 5-hydroxymethylfurfural (HMF) oxidation and 4-nitrophenol (4-NP) reduction were chosen to investigate the catalytic activity as a model reaction for biomass valorization and wastewater remediation. In particular, by fitting the hydrolysis degree with the kinetic data, volcano plots were obtained for both reactions, in which the maximum of the curves was represented relative to hydrolysis intermediate values. However, a comparison of the catalytic performance of the sample Au/AC_PVA-99 (hydrolysis degree of the polymer is 99%) in the two reactions showed a different catalytic behavior, probably due to the detachment of polymer derived from the different reaction temperature chosen between the two reactions. For this reason, several tests were carried out to investigate deeper the observed catalytic trend, focusing on studying the effect of the reaction temperature as well as the effect of support (metal–support interaction) by immobilizing Au colloidal nanoparticles on commercial titania. The kinetic data, combined with the characterization carried out on the catalysts, confirmed that changing the reaction conditions, the PVA behavior on the surface of the catalysts, and, therefore, the reaction outcome, is modified.

Kinetic and Mechanistic Insight into the Surfactant-Induced Aggregation of Gold Nanoparticles and Their Catalytic Efficacy: Importance of Surface Restructuring

Understanding the fundamental interactions between plasmonic metal nanoparticles (MNPs) and small molecules is of utmost importance in various applications such as catalysis, sensing, drug delivery, optoelectronics, and surface-enhanced Raman spectroscopy. Herein, we have investigated the early stage of the aggregation pathway of citrate-stabilized Au NPs with surfactants and explored their catalytic efficacy. Our findings reveal that (17 ± 2)-nm-sized citrate-stabilized Au NPs undergo concentration and time-dependent aggregation with positively charged cetyltrimethylammonium bromide (CTAB). Kinetic analyses revealed the presence of two distinct kinds of aggregates, namely, smaller clusters and a larger branched network of Au nanochains. At longer times and in the presence of higher concentrations of CTAB, these branched networks of Au nanochains transform into dense compact globular aggregates. The catalytic efficacy of Au NPs, branched Au nanochains, and dense compact aggregates has been explored with respect to the reductive hydrogenation of 4-nitophenol in the presence of excess NaBH₄. Our study revealed that the catalytic rate decreases in the order of Au NPs > branched Au nanochains > compact aggregates. Interestingly, pre-equilibrating different Au NP samples with excess NaBH₄ prior to the onset of the reaction results in similar catalytic activity irrespective of the aggregation state of Au NPs. This observation has been explained by considering efficient surface restructuring via ligand exchange with H^- ions and the subsequent disruption of CTAB-induced aggregates of Au NPs. Moreover, the aggregated Au NPs can be recycled over several consecutive cycles for the reductive hydrogenation of 4-NP upon ligand exchange with H^- ions. Taken together, our present study highlights the early-stage aggregation kinetics of Au NPs with CTAB surfactants and demonstrates the importance of the surface restructuring of Au NPs on their catalytic efficacy.

Adsorption and Catalytic Activity of Gold Nanoparticles in Mesoporous Silica: Effect of Pore Size and Dispersion Salinity

The assembled state of nanoparticles (NPs) within porous matrices plays a governing role in directing their biological, electronic, and catalytic properties. However, the effects of the spatial confinement and environmental factors, such as salinity, on the NP assemblies within the pores are poorly understood. In this study, we use adsorption isotherms, spectrophotometry, and small-angle neutron scattering to develop a better understanding of the effect of spatial confinement on the assembled state and catalytic performance of gold (Au) NPs in propylamine-functionalized SBA-15 and MCM-41 mesoporous silica materials (mSiO₂). We carry out a detailed investigation of the effect of pore diameter and ionic strength on the packing and spatial distribution of AuNPs within mSiO₂ to get a comprehensive insight into the structure, functioning, and activity of these NPs. We demonstrate the ability of the adsorbed AuNPs to withstand aggregation under high salinity conditions. We attribute the observed preservation of the adsorbed state of AuNPs to the strong electrostatic attraction between oppositely charged pore walls and AuNPs. The preservation of the structure allows the AuNPs to retain their catalytic activity for a model reaction in high salinity aqueous solution, here, the reduction of p-nitrophenol to p-aminophenol, which otherwise is significantly diminished due to bulk aggregation of the AuNPs. This fundamental study demonstrates the critical role of confinement and dispersion salinity on the adsorption and catalytic performance of NPs.

Effect of the Colloidal Preparation Method for Supported Preformed Colloidal Au Nanoparticles for the Liquid Phase Oxidation of 1,6-Hexanediol to Adipic Acid

Supported on activated carbon gold colloidal nanoparticles have been prepared in the presence of the stabilizing polymer PVA and PVP (polyvinylalcohol, polyvinylpyrrolidone). The effect of the polymer to the Au weight ratio was investigated, for synthesizing gold nanoparticles with different particle size and particle size distribution. By varying the polymer/Au wt/wt ratio, gold nanoparticles with mean diameters from 3 to 8 nm were synthesized. The synthesized Au catalysts were studied in the liquid phase oxidation of 1,6-hexanediol (HDO) to adipic acid under base and base-free conditions. A range of experimental parameters were varied for the optimization of reaction conditions and the most promising Au catalysts were further evaluated in terms of catalytic performance. We demonstrated that the influence of choice of polymer, tuning the polymer to Au weight ratio, HDO to Au molar ratio, and use of basic conditions have an important influence in terms of catalytic activity and selectivity to adipic acid. The highest yield to adipic acid was obtained using Au-PVA catalysts (40% at 110 °C under base free conditions), however, at low HDO to Au molar ratio and lower carbon balance (70–80%). On the contrary, at higher HDO to Au molar ratio, and under basic conditions, the yield was in the range of 18–20% with a significant improvement in terms of carbon balance (88–100%).

Peptide modification on the interior surface of red blood cell ghosts for construction of catalytic reactors

We report in situ synthesis of gold nanoparticles (Au NPs) on the interior surfaces of red blood cell ghosts (RBCGs) with a cytoskeleton conjugated to a gold-binding peptide and reduction of 4-nitrophenol by the resulting Au NP-deposited RBCG.

Aqueous (co)polymer stabilisers for size-controlled 2–5 nm gold nanoparticle synthesis with tuneable catalytic activity

Tuneable (co)polymer composition and architecture influences both AuNP size during synthesis and catalytic activity for the reduction of 4-Nitrophenol.

Nanocatalysis under Nanoconfinement: A Metal-Free Hybrid Coacervate Nanodroplet as a Catalytic Nanoreactor for Efficient Redox and Photocatalytic Reactions

Nature utilizes cellular and subcellular compartmentalization to efficiently drive various complex enzymatic transformations via spatiotemporal control. In this context, designing of artificial nanoreactors for efficient catalytic transformations finds tremendous importance in recent times. One key challenge remains the design of multiple catalytic centers within the confined space of a nanoreactor without unwanted agglomeration and accessibility barrier for reactants. Herein, we report a unique blend of nanoscience and chemical catalysis using a metal-free hybrid synthetic protocell as a catalytic nanoreactor for redox and photocatalytic transformations, which are otherwise incompatible in bulk aqueous medium. Hybrid coacervate nanodroplets (NDs) fabricated from 2.5 nm-sized carbon dots (CDs) and poly(diallyldimethyl)ammonium chloride have been utilized toward reductive hydrogenation of nitroarenes in the presence of sodium borohydride (NaBH₄). It has been found that the reduction mechanism follows the classical Langmuir-Hinshelwood (LH) model at the surface of embedded CDs inside the NDs via the generation of reactive surface hydroxyl groups. These NDs show excellent recyclability without any compromise on reaction kinetics and conversion yield. Importantly, spatiotemporal control over the hydrogenation reaction has been achieved using two mixed populations of coacervates. Moreover, efficient visible light-induced photoredox conversion of ferricyanide to ferrocyanide and artificial peroxidase-like activity have also been demonstrated inside these catalytic NDs. Our findings indicate that the individual polymer-bound CD inside the NDs acts as the catalytic center for both the redox and photocatalytic reactions. The present study highlights the unprecedented catalytic activity of the metal-free CD-based coacervate NDs and paves the way for next-generation catalytic nanoreactors for a wide range of chemical and enzymatic transformations.

Galactose Grafted Two-Dimensional Nanosheets as a Scaffold for the In Situ Synthesis of Silver Nanoparticles: A Potential Catalyst for the Reduction of Nitroaromatics

Two major hurdles in NP-based catalysis are the aggregation of the NPs and their recycling. Immobilization of NPs onto a 2D support is the most promising strategy to overcome these difficulties. Herein, amphiphilicity-driven self-assembly of galactose-hexaphenylbenzene-based amphiphiles into galactose-decorated 2D nanosheet is reported. The extremely dense decoration of reducing sugar on the surface of the sheets is used for the in situ synthesis and immobilization of ultrafine catalytically active AgNPs by using Tollens' reaction. The potential of the system as a catalyst for the reduction of various nitroaromatics is demonstrated. Enhanced catalytic activity is observed for the immobilized AgNPs when compared to the corresponding discrete AgNPs. Recovery of the catalytic system from the reaction mixture by ultrafiltration and its subsequent recycling for several cycles without dropping its activity is shown. This is the first report demonstrating the in situ synthesis and immobilization of ultrafine AgNPs onto a 2D nanosheet that exhibits excellent catalytic performance for the reduction of nitroaromatics.

Smart hydrogel-microsphere embedded silver nanoparticle catalyst with high activity and selectivity for the reduction of 4-nitrophenol and azo dyes

A simple method is reported for the preparation of silver nanoparticle (AgNP) embedded pH-responsive hydrogel microparticle catalyst via Michael addition gelation and in-situ silver nitrate (AgNO₃) reduction. The AgNP-hydrogel microsphere exhibited an efficient reduction of pollutants like 4-Nitrophenol (4-NP) and Congo red (CR) under acidic medium with turn over frequency (TOF) of ~170 h^-1 and ~124 h^-1 respectively. Interestingly, the activity of the catalysts was turned-OFF under a basic medium (≥ pH 12) due to the deswelling pH-responsive matrix surrounding the AgNPs. On the contrary, turning-OFF the hydrogenation of a cationic pollutant like methylene blue (MB) using high pH (≥ 12) was not possible, due to ionic interaction of MB molecules with the negatively charged catalyst at this pH. This feature was used to demonstrate selective hydrogenation of only MB from a mixture of 4-NP and MB. Finally, five recycling steps confirmed the reusability and practical application potential of the catalyst.

Precisely Engineered Supported Gold Clusters as a Stable Catalyst for Propylene Epoxidation

Designing a stable and selective catalyst with high H₂ utilisation is of pivotal importance for the direct gas-phase epoxidation of propylene. This work describes a facile one-pot methodology to synthesise ligand-stabilised sub-nanometre gold clusters immobilised onto a zeolitic support (TS-1) to engineer a stable Au/TS-1 catalyst. A non-thermal O₂ plasma technique is used for the quick removal of ligands with limited increase in particle size. Compared to untreated Au/TS-1 catalysts prepared using the deposition precipitation method, the synthesised catalyst exhibits improved catalytic performance, including 10 times longer lifetime (>20 days), increased PO selectivity and hydrogen efficiency in direct gas phase epoxidation. The structure-stability relationship of the catalyst is illustrated using multiple characterisation techniques, such as XPS, ³¹ P MAS NMR, DR-UV/VIS, HRTEM and TGA. It is hypothesised that the ligands play a guardian role in stabilising the Au particle size, which is vital in this reaction. This strategy is a promising approach towards designing a more stable heterogeneous catalyst.