Dynamics of CrO3–Fe2O3 Catalysts during the High-Temperature Water-Gas Shift Reaction: Molecular Structures and Reactivity

Coprecipitation of Fe/Cr Hydroxides at Organic-Water Interfaces: Functional Group Richness and (De)protonation Control Amounts and Compositions of Coprecipitates

Iron/chromium hydroxide coprecipitation controls the fate and transport of toxic chromium (Cr) in many natural and engineered systems. Organic coatings on soil and engineered surfaces are ubiquitous; however, mechanistic controls of these organic coatings over Fe/Cr hydroxide coprecipitation are poorly understood. Here, Fe/Cr hydroxide coprecipitation was conducted on model organic coatings of humic acid (HA), sodium alginate (SA), and bovine serum albumin (BSA). The organics bonded with SiO2 through ligand exchange with carboxyl (-COOH), and the adsorbed amounts and pKa values of -COOH controlled surface charges of coatings. The adsorbed organic films also had different complexation capacities with Fe/Cr ions and Fe/Cr hydroxide particles, resulting in significant differences in both the amount (on HA > SA(-COOH) ≫ BSA(-NH2)) and composition (Cr/Fe molar ratio: on BSA(-NH2) ≫ HA > SA(-COOH)) of heterogeneous precipitates. Negatively charged -COOH attracted more Fe ions and oligomers of hydrolyzed Fe/Cr species and subsequently promoted heterogeneous precipitation of Fe/Cr hydroxide nanoparticles. Organic coatings containing -NH2 were positively charged at acidic pH because of the high pKa value of the functional group, limiting cation adsorption and formation of coprecipitates. Meanwhile, the higher local pH near the -NH2 coatings promoted the formation of Cr(OH)3. This study advances fundamental understanding of heterogeneous Fe/Cr hydroxide coprecipitation on organics, which is essential for successful Cr remediation and removal in both natural and engineered settings, as well as the synthesis of Cr-doped iron (oxy)hydroxides for material applications.

Heterogeneous Coprecipitation of Nanocrystals with Metals on Substrates

ConspectusThe heterogeneous coprecipitation of nanocrystals with metals on substrates plays a significant role in both natural and engineered systems. Due to the small dimensions and thereby the large specific surface area, nanocrystal coprecipitation with metals, which is ubiquitous in natural settings, exerts drastic effects on the biogeochemical cycling of metals on the earth's crust. Meanwhile, the controlled synthesis of nanocrystals with metal doping to achieve tunable size/composition enables their broad applications as adsorbents and catalysts in many engineered settings. Despite their importance, complex interactions among aqueous ions/polymers, nanocrystals, substrates, and metals are far from being well-understood, leaving the controlling mechanisms for nanocrystal formation with metals on substrates uncovered.In this Account, we discuss our systematic investigation over the past 10 years of the heterogeneous formation of representative nanocrystals with metals on typical substrates. We chose Fe(OH)3 and BaSO4 as representative nanocrystals. Mechanisms for varied metal coprecipitation were also investigated for both types of nanocrystals (i.e., Fe, Al, Cr, Cu, and Pb)(OH)3 and (Ba, Sr)(SO4, SeO4, and SeO3)). Bare SiO2 and Al2O3, as well as those coated with varied organics, were selected as geologically or synthetically representative substrates. Through the integration of state-of-the-art nanoscale interfacial characterization techniques with theoretical calculations, the complex interactions during nanocrystal formation at interfaces were probed and the controlling mechanisms were identified.For BaSO4 and Fe(OH)3 formation on substrates, the local supersaturation levels near substrates were controlled by Ba2+ adsorption and the electrostatic attraction of Fe(OH)3 monomer/polymer to substrates, respectively. Meanwhile, substrate hydrophobicity controlled the interfacial energy for the nucleation of both nanocrystals on (in)organic substrates. Metal ions' (i.e., Cr/Al/Cu/Pb) hydrolysis constants and substrates' dielectric constants controlled metal ion adsorption onto substrates, which altered the surface charges of substrates, thus controlling heterogeneous Fe(OH)3 nanocrystal formation on substrates by electrostatic interactions. The sizes and compositions of heterogeneous (Fe, Cr)(OH)3 and (Ba, Sr)(SO4, SeO4, SeO3) formed on substrates were found to be distinct from those of homogeneous precipitates formed in solution. The substrate (de)protonation could alter the local solution's pH and the substrates' surface charge; substrates could also adsorb cations, affecting local Fe/Cr/Ba/Sr ion concentrations at solid-water interfaces, thus controlling the amount/size/composition of nanocrystals by tuning their nucleation/growth/deposition on substrates. From slightly supersaturated solution, homogeneous coprecipitates of microsized (Ba, Sr)(SO4, SeO4, SeO3) formed through growth, with little Sr/Se(VI) incorporation due to higher solubilities of SrSO4 and BaSeO4 over BaSO4. While cation enrichment near substrates made the local solution highly supersaturated, nanosized coprecipitates formed on substrates through nucleation, with more Sr/Se(VI) incorporation due to lower interfacial energies of SrSO4 and BaSeO4 over BaSO4. The new insights gained advanced our understanding of the biogeochemical cycling of varied elements at solid-water interfaces and of the controlled synthesis of functional nanocrystals.

Design of Cr-Free Promoted Copper-Iron Oxide-Based High-Temperature Water-Gas Shift Catalysts

The effect of Ce addition to the Cr-free Al-promoted Cu-Fe oxide-based catalysts is investigated. Catalyst characterization (X-ray diffraction (XRD), in situ Raman spectroscopy, high-sensitivity low-energy ion scattering (HS-LEIS), Brunauer-Emmett-Teller (BET) analysis), CO-temperature-programmed reduction chemical probing, and steady-state WGS activity reveal that (i) in the absence of Al, Ce addition via coprecipitation has a detrimental effect on the catalytic activity related to the poor thermostability and formation of less active Ce-Cu-O NPs, (ii) the addition of Ce via coprecipitation also does not improve the performance of the CuAlFe catalyst because of the formation of a thick CeOx overlayer on the active Cu-FeOx interface, and (iii) impregnation of Ce onto the CuAlFe catalyst exhibits significant improvement in catalytic performance due to the formation of a highly active CeOx-FeOx-Cu interfacial area. In summary, Al does not surface-segregate and serves as a structural promoter, while Ce and Cu surface-segregate and act as functional promoters in Ce/CuAlFe mixed oxide catalysts.

Boosting the performance of Ni/Al2O3 for the reverse water gas shift reaction through formation of CuNi nanoalloys

Adding Cu to Ni/Al2O3 is an excellent strategy to suppress methane formation and enhance carbon monoxide yield through formation of alloyed nanoparticles.

Structural elucidation of hexavalent Cr adsorbed on surfaces and bulks of Fe3O4 and α-FeOOH

Magnetite (Fe3O4) and goethite (α-FeOOH) were synthesized via a hydrothermal approach and utilized as adsorbents for Cr6+ removal in an aqueous medium. Cr3+ could migrate into bulk Fe3O4 and stabilize in form of a solid solution.

Elucidation of copper environment in a Cu-Cr-Fe oxide catalyst through in situ high-resolution XANES investigation

Copper containing materials are widely used in a range of catalytic applications. Here, we report the use of Cu K-edge high resolution XANES to determine the local site symmetry of copper ions during the thermal treatment of a Cu-Cr-Fe oxide catalyst. We exploited the Cu K-edge XANES spectral features, in particular the correlation between area under the pre-edge peak and its position to determine the local environment of Cu2+ ions. The information gained from this investigation rules out the presence of Cu2+ ions in a tetrahedral or square planar geometry, a mixture of these sites, or in a reduced oxidation state. Evidence is presented that the Cu2+ ions in the Cu-Cr-Fe oxide system are present in a distorted octahedral environment.

Methane activation by ZSM-5-supported transition metal centers

This review focuses on recent fundamental insights about methane dehydroaromatization (MDA) to benzene over ZSM-5-supported transition metal oxide-based catalysts (MO_x/ZSM-5, where M = V, Cr, Mo, W, Re, Fe). Benzene is an important organic intermediate, used for the synthesis of chemicals like ethylbenzene, cumene, cyclohexane, nitrobenzene and alkylbenzene. Current production of benzene is primarily from crude oil processing, but due to the abundant availability of natural gas, there is much recent interest in developing direct processes to convert CH₄ to liquid chemicals. Among the various gas-to-liquid methods, the thermodynamically-limited Methane DehydroAromatization (MDA) to benzene under non-oxidative conditions appears very promising as it circumvents deep oxidation of CH₄ to CO₂ and does not require the use of a co-reactant. The findings from the MDA catalysis literature is critically analyzed with emphasis on in situ and operando spectroscopic characterization to understand the molecular level details regarding the catalytic sites before and during the MDA reaction. Specifically, this review discusses the anchoring sites of the supported MO_x species on the ZSM-5 support, molecular structures of the initial dispersed surface MO_x sites, nature of the active sites during MDA, reaction mechanisms, rate-determining step, kinetics and catalyst activity of the MDA reaction. Finally, suggestions are given regarding future experimental investigations to fill the information gaps currently found in the literature.

Co–Cr bimetallic oxides derived from layered double hydroxides with high catalytic performance for chlorinated aromatics oxidation

Co–Cr bimetallic oxides with different Co/Cr molar ratios were prepared through a layered double hydroxide (LDH)-derived method.

Reversible structural transformation and redox properties of Cr-loaded iron oxide dendrites studied by in situ XANES spectroscopy

Cr-Loaded iron oxide with a dendritic crystalline structure was synthesized and the reversible crystalline phase transition during redox cycling of the iron oxide was investigated. X-ray diffraction and transmission electron microscopy analyses revealed that Cr was well dispersed and loaded in the iron oxide dendrite crystals, whose lattice constant was dependent on the Cr loading. Temperature-programmed oxidation and reduction experiments revealed the reversible redox properties of the Cr-loaded iron oxide dendrites, whose redox temperature was found to be lower than that of Cr-free iron oxide dendrites. In situ Fe K-edge and Cr K-edge X-ray absorption near-edge structure (XANES) analysis indicated that Cr loading extended the redox reaction window for conversion between Fe3O4 and γ-Fe2O3 owing to compressive lattice strain in the iron oxide spinel structures.

Present and new frontiers in materials research by ambient pressure x-ray photoelectron spectroscopy

In this topical review we catagorise all ambient pressure x-ray photoelectron spectroscopy publications that have appeared between the 1970s and the end of 2018 according to their scientific field. We find that catalysis, surface science and materials science are predominant, while, for example, electrocatalysis and thin film growth are emerging. All catalysis publications that we could identify are cited, and selected case stories with increasing complexity in terms of surface structure or chemical reaction are discussed. For thin film growth we discuss recent examples from chemical vapour deposition and atomic layer deposition. Finally, we also discuss current frontiers of ambient pressure x-ray photoelectron spectroscopy research, indicating some directions of future development of the field.

Cr-Free, Cu Promoted Fe Oxide-Based Catalysts for High-Temperature Water-Gas Shift (HT-WGS) Reaction

Ca, Ni, Co, and Ge promoters were examined as potential candidates to substitute for the current toxic Cr in Cu-promoted Fe oxide-based catalysts for the HT-WGS reaction. The Ca and Ni promoters were found to improve catalyst performance relative to promotion with Cr. The HS-LEIS surface analysis data demonstrate that Ca and Ge tend to segregate on the surface, while Ni, Co, and Cr form solid solutions in the Fe3O4 bulk lattice. The corresponding number of catalytic active sites, redox, and WGS activity values of the catalysts were determined with CO-TPR, CO+H2O-TPSR, and SS-WGS studies, respectively. The poorer HT-WGS performances of the Ge and Co promoters are related to the presence of surface Ge and Co that inhibits catalyst redox ability, with the Co also not stabilizing the surface area of the Fe3O4 support. The Ni promoter uniformly disperses the Cu nanoparticles on the catalyst surface and increases the number of FeOx-Cu interfacial redox sites. The Ca promoter on the catalyst surface, however, enhances the activity of the FeOx-Cu interfacial redox sites. The CO+H2O TPSR results reveal that the redox ability of the active sites follows the SS-WGS performance of the catalysts and show the following trend: 3Cu8CaFe > 3Cu8NiFe ≥ 3Cu8CrFe > 3Cu8CoFe >> 3Cu8GeFe. Furthermore, all the catalysts followed a redox-type reaction mechanism for the HT-WGS reaction.

A mini review of in situ near-ambient pressure XPS studies on non-noble, late transition metal catalysts

The rich surface chemistry of Fe, Co, Ni and Cu during heterogeneous catalytic reactions from the perspective of NAP-XPS studies.

On the nature of active phases and sites in CO and CO2 hydrogenation catalysts

Advanced characterisation techniques are shedding new light on the identification of active CO_x hydrogenation phases and sites.

CO2 hydrogenation to higher hydrocarbons on K/Fe–Al–O spinel catalysts promoted with Si, Ti, Zr, Hf, Mn and Ce

Si and Zr species grafted on Fe–Al–O catalysts act as an inhibitor and promoter, respectively, in CO₂ hydrogenation.