Design and Applications of an Efficient Amphiphilic “Click” CuI Catalyst in Water

New Carboxytriazolyl Amphiphilic Derivatives of Calix[4]arenes: Aggregation and Use in CuAAC Catalysis

This work focuses on the synthesis of a new series of amphiphilic derivatives of calix[4]arenes for the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The aggregation properties of synthesized calix[4]arenes were studied using various techniques (fluorescence spectroscopy, nanoparticle tracking analysis, and dynamic light scattering). Increasing the length of the alkyl substituent led to stronger hydrophobic interactions, which increased polydispersity in solution. The zwitterionic nature of the synthesized calix[4]arenes was established using different types of dyes (Eosin Y for anionic structures and Rhodamine 6G for cationic structures). The synthesized calix[4]arenes were used as organic stabilizers for CuI. The catalytic efficiency of CuI-calix[4]arene was compared with that of the phase transfer catalyst tetrabutylammonium bromide (TBAB) and the surfactant sodium dodecyl sulfate (SDS). For all calixarenes, the selectivity in the CuAAC reaction was higher than that observed when TBAB and SDS were estimated.

From sandwich complexes to dendrimers: journey toward applications to sensing, molecular electronics, materials science, and biomedicine

This review links various areas of inorganic chemistry around the themes developed by our research group during the last four decades. It is firstly based on the electronic structure of iron sandwich complexes, showing how the metal electron count dictates their reactivities, with various applications (via C-H activation, C-C bond formation) as reducing and oxidizing agents, redox and electrocatalysts and precursors of dendrimers and catalyst templates through bursting reactions. Various electron-transfer processes and consequences are explored, including the influence of the redox state on the acidity of robust ligands and the possibility to iterate in situ C-H activation and C-C bond formation to build arene-cored dendrimers. Examples of how these dendrimers are functionalized are illustrated using the cross olefin metathesis reactions, with application to the synthesis of soft nanomaterials and biomaterials. Mixed and average valence complexes give rise to remarkable subsequent organometallic reactions, including the salt influence on these reactions. The stereo-electronic aspect of these mixed valencies is pointed out in star-shaped multi-ferrocenes with a frustration effect and other multi-organoiron systems, with the perspective of understanding electron-transfer processes among dendrimer redox sites involving electrostatic effects and application to redox sensing and polymer metallocene batteries. Dendritic redox sensing is summarized for biologically relevant anions such as ATP^2- with supramolecular exoreceptor interactions at the dendrimer periphery in parallel with the seminal work on metallocene-derived endoreceptors by Beer's group. This aspect includes the design of the first metallodendrimers that have applications in both redox sensing and micellar catalysis with nanoparticles. These properties provide the opportunity to summarize the biomedical (mostly anticancer) applications of ferrocenes, dendrimers and dendritic ferrocenes in biomedicine (in particular the contribution from our group, but not only). Finally, the use of dendrimers as templates for catalysis is illustrated with numerous reactions including C-C bond formation, click reactions and H₂ production reactions.

Azide-Alkyne Cycloaddition Catalyzed by Copper(I) Coordination Polymers in PPM Levels Using Deep Eutectic Solvents as Reusable Reaction Media: A Waste-Minimized Sustainable Approach

Two air-stable copper(I)-halide coordination polymers 1 and 2 with NNS and NNO ligand frameworks were synthesized and successfully utilized as efficient catalysts in an important organic reaction, namely, copper-catalyzed azide-alkyne cycloaddition, which is generally conducted in a mixture of water and organic solvents. The azide-alkyne "click" reaction was successfully conducted in pure water at r.t. under aerobic conditions. Other green solvents, including ethanol and glycerol, were also effectively used. Finally, deep eutectic solvents as green and sustainable reaction media were successfully utilized. In deep eutectic solvents, complete conversion with excellent isolated yield was achieved in a short period of time (1 h) with low catalyst loading (1 mol %) at r.t. Full conversion could also be achieved within 24 h with ppm-level (50 ppm) catalyst loading at 70 °C. Optimized reaction conditions were used for the syntheses of a large number of 1,4-disubstituted 1,2,3-triazoles with various functionalities. Triazole products were easily isolated by simple filtration. The reaction media, such as water and deep eutectic solvents, were recovered and recycled in three consecutive runs. The limited waste production is reflected in a very low E-factor (0.3-2.8). Finally, the CHEM21 green metrics toolkit was employed to evaluate the sustainability credentials of different optimized protocols in various green solvents such as water, ethanol, glycerol, and deep eutectic solvents.

Regioselective One-Pot Synthesis, Biological Activity and Molecular Docking Studies of Novel Conjugates N-(p-Aryltriazolyl)-1,5-benzodiazepin-2-ones as Potent Antibacterial and Antifungal Agents

Novel 1,2,3-triazolo-linked-1,5-benzodiazepinones were designed and synthesized via a Cu(I)-catalyzed 1,3-dipolar alkyne-azide coupling reaction (CuAAC). The chemical structures of these compounds were confirmed by 1H NMR, 13C NMR, HMBC, HRMS, and elemental analysis. The compounds were screened for their in vitro antibacterial and antifungal activities. Several compounds exhibited good to moderate activities compared to those of established standard drugs. Furthermore, the binding interactions of these active analogs were confirmed through molecular docking.

Azide-Alkyne "Click" Reaction in Water Using Parts-Per-Million Amine-Functionalized Azoaromatic Cu(I) Complex as Catalyst: Effect of the Amine Side Arm

A series of Cu(II) complexes, 1-4 and 6, were synthesized through a reaction of amine-functionalized pincer-like ligands, HL^1,2, L^a,b, and a bidentate ligand L¹ with CuCl₂·2H₂O. The chemical reduction of complex 1 using 1 equiv of sodium l-ascorbate resulted in a dimeric Cu(I) complex 5 in excellent yield. All of the complexes, 1-6, were thoroughly characterized using various physicochemical characterization techniques, single-crystal X-ray structure determination, and density functional theory calculations. Ligands HL^1,2 and L^a,b behaved as tridentated donors by the coordination of the amine side arm in their respective Cu(II) complexes, and the amine side arm remained as a pendant in Cu(I) complexes. All of these complexes (1-6) were explored for copper(I)-catalyzed 1,3-dipolar azide-alkyne cycloaddition (CuAAC) reaction at room temperature in water under air. Complex 5 directly served as an active catalyst; however, complexes 1-4 and 6 required 1 equiv of sodium l-ascorbate to generate their corresponding active Cu(I) catalyst. It has been observed that azo-based ligand-containing Cu(I)-complexes are air-stable and were highly efficient for the CuAAC reaction. The amine side arm in the ligand backbone has a dramatic role in accelerating the reaction rate. Mechanistic investigations showed that the alkyne C-H deprotonation was the rate-limiting step and the pendant amine side arm intramolecularly served as a base for Cu-coordinated alkyne deprotonation, leading to the azide-alkyne 2 + 3 cycloaddition reaction. Thus, variation of the amine side arm in complexes 1-4 and use of the most basic diisopropyl amine moiety in complex 4 has resulted in an unique amine-functionalized azoaromatic Cu(I) system for CuAAC reaction upon sodium l-ascorbate reduction. The complex 4 has shown excellent catalysis at its low parts-per-million level loading in water. The catalytic protocol was versatile and exhibited very good functional group tolerance. It was also employed efficiently to synthesize a number of useful functional triazoles having medicinal, catalytic, and targeting properties.

Dinuclear Copper Complex Immobilized on a Janus-Type Material as an Interfacial Heterogeneous Catalyst for Green Synthesis

We herein describe a rational design of a heterogeneous catalyst composed of a dinuclear cuprate anion being immobilized electrostatically on one surface of Janus-type nanosheets while the other surface is decorated with highly hydrophobic octyl groups. The catalyst was found to be well dispersible in the organic phase of a biphasic aqueous/organic mixture. It was characterized by means of elemental analysis, atomic absorption spectroscopy, mass spectrometry, N₂ absorption-desorption analysis, thermogravimetric analysis, scanning electron microscopy (SEM), and solid-state ¹³C and ²⁹Si cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy. The Janus nature of the catalyst was investigated by employing a selective surface labeling method and by means of SEM. The catalyst shows higher activity compared to a non-Janus analogue in a biphasic synthesis. It was successfully used for the azide-alkyne cycloaddition and the Chan-Lam C-N coupling reaction. In addition, new and simple ways have been established for the production of a coumarin-triazole derivative and for the synthesis of the biologically active compound Monastrol via a solvent-free Biginelli reaction. The role of the dinuclear copper centers is discussed mechanistically.

A robust heterogeneous Co-MOF catalyst in azide–alkyne cycloaddition and Friedel–Crafts reactions as well as hydrosilylation of alkynes

A robust Co(ii) MOF with high stability was prepared to promote the azide–alkyne cycloaddition reaction, Friedel–Crafts reactions of indoles and hydrosilylation reactions of alkynes.

Synthesis of heteroleptic phosphine–copper(i) complexes: fluorescence sensing and catalytic properties

A series of heteroleptic Cu(i) complexes were precisely synthesized using different bipyridine and diphosphine ligands. These complexes exhibited fluorescence sensing towards silver ions and high catalytic activity towards the CuAAC reaction.

A ferrocene functionalized Schiff base containing Cu(ii) complex: synthesis, characterization and parts-per-million level catalysis for azide alkyne cycloaddition

Atom economy is one of the major factors in developing catalysis chemistry. Using the minimum amount of catalyst to obtain the maximum product yield is of the utmost priority in catalysis, which drives us to use parts-per-million (ppm) levels of catalyst loadings in syntheses. In this context, a new ferrocene functionalized Schiff base and its copper(ii) complex have been synthesized and characterized. This Cu(ii) complex is employed as a catalyst for popular 'click chemistry', where 1,2,3-triazoles are the end product. As low as 5 ppm catalyst loading is enough to produce gram scale product, and highest turnover number (TON) and turnover frequency (TOF) values of 140 000 and 70 000 h^-1 are achieved, respectively. Furthermore, this highly efficient protocol has been successfully applied to the preparation of diverse functionalized materials with pharmaceutical, labelling and supramolecular properties.

Supported Tris-Triazole Ligands for Batch and Continuous-Flow Copper-Catalyzed Huisgen 1,3-Dipolar Cycloaddition Reactions

The lack of supported versions of the tris[(1-benzyl-1H-1,2,3-triazol-4-yl)methyl]amine (TBTA) ligand, suitable for flow-chemistry applications at scale, prompted us to develop a new route for the immobilization of such tris-triazole chelating units on highly cross-linked polystyrene resins. With this aim, the preparation of the known TBTA-type monomer 3 was optimized to develop a high-yield synthetic sequence, devoid of chromatographic purifications at any stage. Then, bead-type (P7) and monolithic (M7) functional resins were obtained by the easy and scalable suspension- or mold-copolymerization of 3 with divinylbenzene. Both types of materials were found to possess a highly porous morphology and specific surface area in the dry state and could be charged with substantial amounts of Cu(I) or Cu(II) salts. After treatment of the latter with a proper reducing agent, the corresponding supported Cu(I) complexes were tested in the copper-catalyzed alkyne-azide cycloaddition reaction (CuAAC). The immobilized catalysts proved active at room temperature and, in batch and with catalyst loadings as low as 0.6 mol%, afforded quantitative conversions within 20 h. Independent of the alkyne structure, extended use of the supported catalyst in flow was also possible. In the reaction of benzylazide and propargyl alcohol, this allowed a total turnover number larger than 400 to be reached.

Highly modulated supported triazolium-based ionic liquids: direct control of the electronic environment on Cu nanoparticles

A series of new triazolium-based supported ionic liquids (SILPs), decorated with Cu NPs, were successfully prepared and applied to the N-arylation of aryl halides with anilines. The triazoles moieties were functionalised using copper-catalysed azide-alkyne cycloaddition. SILP surface characterisation showed a strong correlation between the triazolium cation volume and textural properties. STEM images showed well-dispersed Cu NPs on SILPs with a mean diameter varying from 3.6 to 4.6 nm depending on the triazolium cation used. Besides, XPS results suggest that the Cu(0)/Cu(i) ratio can be modulated by the electronic density of triazolium substituents. XPS and computational analysis gave mechanistic insights into the Cu NP stabilisation pathways, where the presence of electron-rich groups attached to a triazolium ring plays a critical role in leading to a cation adsorption pathway (E _ads = 72 kcal mol^-1). In contrast, less electron-rich groups favour the anion adsorption pathway (E _ads = 63 kcal mol^-1). The Cu@SILP composite with electron-rich groups showed the highest activity for the C-N Ullmann coupling reaction, which suggests that electron-rich groups might act as an electron-like reservoir to facilitate oxidative addition for N-arylation. This strategy firmly suggests the strong dependence of the nature of triazolium-based SILPs on the Cu NP surface active sites, which may provide a new environment to confine and stabilise MNPs for catalytic applications.

Chemical Waltz of Organic Molecules "On Water": Saline-Assisted Sustainable Regioselective Synthesis of Fluorogenic Heterobioconjugates via Click Reaction

A new sustainable green protocol for obtaining highly fluorogenic heterobioconjugates by a well-known copper-mediated azide-alkyne cycloaddition click reaction of nonfluorescent 3-azidocoumarins/benzyl azides (2a-f) and terminal alkynes (1a-e) using aqueous NaCl as a cheap and nontoxic salting-out agent under ultrasonication at ambient temperature is described. The presence of aqueous NaCl significantly influences the reaction by disturbing the water kosmotropes and augments the hydrophobic interaction of water-insoluble reactants, thus making the reaction feasible in water at neutral pH. The "beauty" of the presented ecofriendly approach is further boosted up by recycling the aqueous filtrate of the reaction mixture without further addition of NaCl, CuSO₄·5H₂O, and Na ascorbate up to seven cycles, resulting in effectively low copper loading (100 ppm) with excellent turn-over number (4850) and turn-over frequency (88.18 min^-1). A gram-scale synthesis was also successfully achieved with 92% yield, further elaborating the scope of this methodology.

Metallopolymers for advanced sustainable applications

Since the development of metallopolymers, there has been tremendous interest in the applications of this type of materials. The interest in these materials stems from their potential use in industry as catalysts, biomedical agents in healthcare, energy storage and production as well as climate change mitigation. The past two decades have clearly shown exponential growth in the development of many new classes of metallopolymers that address these issues. Today, metallopolymers are considered to be at the forefront for discovering new and sustainable heterogeneous catalysts, therapeutics for drug-resistant diseases, energy storage and photovoltaics, molecular barometers and thermometers, as well as carbon dioxide sequesters. The focus of this review is to highlight the advances in design of metallopolymers with specific sustainable applications.

Evaluation of dicopper azacryptand complexes in aqueous CuAAC reactions and their tolerance toward biological thiols

The catalytic activity of dicopper azacryptands was evaluated in water and in the presence of biological thiols.

A copper(ii) metal-organic hydrogel as a multifunctional precatalyst for CuAAC reactions and chemical fixation of CO2 under solvent free conditions

A copper(ii) metal-organic hydrogel has been synthesised and characterised. This hydrogel is an efficient, reusable precatalyst for CuAAC reactions and chemical fixation of CO₂ under solvent free conditions.

Discrete Cu(i) complexes for azide-alkyne annulations of small molecules inside mammalian cells

The archetype reaction of "click" chemistry, namely, the copper-promoted azide-alkyne cycloaddition (CuAAC), has found an impressive number of applications in biological chemistry. However, methods for promoting intermolecular annulations of exogenous, small azides and alkynes in the complex interior of mammalian cells, are essentially unknown. Herein we demonstrate that isolated, well-defined copper(i)-tris(triazolyl) complexes featuring designed ligands can readily enter mammalian cells and promote intracellular CuAAC annulations of small, freely diffusible molecules. In addition to simplifying protocols and avoiding the addition of "non-innocent" reductants, the use of these premade copper complexes leads to more efficient processes than with the alternative, in situ made copper species prepared from Cu(ii) sources, tris(triazole) ligands and sodium ascorbate. Under the reaction conditions, the well-defined copper complexes exhibit very good cell penetration properties, and do not present significant toxicities.

Facile Fabrication of Ordered Component-Tunable Heterobimetallic Self-Assembly Nanosheet for Catalyzing "Click" Reaction

How to maximize the number of desirable active sites on the surface of the catalyst and minimize the number of sites promoting undesirable side reactions is currently an important research topic. In this study, a new way based on the synergism to achieve the successful fabrication of an ordered heterobimetallic self-assembled monolayer (denoted as BMSAM) with a controlled composition and an excellent orientation of metals in the monolayer was developed. BMSAM consisting of phenanthroline and Schiff-base groups was prepared, and its novel heterobimetallic (Cu and Pd) self-assembled monolayer anchored in silicon (denoted as Si-Fmp-Cu-Pd BMSAM) with a controlled composition and a fixed position was fabricated and characterized by UV, cyclic voltammetry, Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and water-drop contact angle (WDCA) analyses. The effects of Si-Fmp-Cu-Pd BMSAM on its catalytic properties were also systematically investigated using "click" reaction as a template by WDCA, XPS, SEM, XRD, ICP-AES and in situ Fourier transform infrared analyses in a heterogeneous system. The results showed that the excellent catalytic characteristic could be attributed to the partial (ordered or proper distance) isolation of active sites displaying high densities of specific atomic ensembles. The catalytic reaction mechanism of the click reaction interpreted that the catalytic process mainly occurred on the surface of the monolayer, internal active site (Pd) and rationalized that the Cu(I) species and Pd(0) reduced from the Cu(II) and Pd(II) catalyst were active species, which had a proper distance between two different metals. The cuprate-triazole intermediate and the palladium intermediate, whose production is the key step, should lie in a proper position between the copper and active palladium sites, with which the reaction rate of transmetalation would be improved to increase the amount of the undesired Sonogashira coupling product.

One-pot blue-light triggered tough interpenetrating polymeric network (IPN) using CuAAC and methacrylate reactions

An interpenetrating polymeric network (IPN) is formed in a one-pot blue-light activated scheme, where the step- and chain- growth polymerizations of the CuAAC and methacrylate reactions, respectively, are simultaneously triggered but proceed sequentially. The glassy IPN is polymerized under ambient conditions and is able to withstand high strain before failure owing to its significantly enhanced toughness. Additionally, this material exhibits shape memory attributes with readily tunable mechanical properties at high temperature.

An efficient parts-per-million α-Fe2O3 nanocluster/graphene oxide catalyst for Suzuki–Miyaura coupling reactions and 4-nitrophenol reduction in aqueous solution

α-Fe₂O₃ nanoclusters supported onto a graphene oxide catalyst are shown for the first time to catalyze Suzuki–Miyaura coupling and 4-nitrophenol reduction in aqueous solution with only parts-per-million loading.

An efficient Cu-catalyzed azide–alkyne cycloaddition (CuAAC) reaction in aqueous medium with a zwitterionic ligand, betaine

Betaine, a simple zwitterionic additive, dramatically accelerated the CuAAC reaction in excellent yields under 2.5–200 ppm levels of Cu^(I) in water.

Recent Advances in Recoverable Systems for the Copper-Catalyzed Azide-Alkyne Cycloaddition Reaction (CuAAC)

The explosively-growing applications of the Cu-catalyzed Huisgen 1,3-dipolar cycloaddition reaction between organic azides and alkynes (CuAAC) have stimulated an impressive number of reports, in the last years, focusing on recoverable variants of the homogeneous or quasi-homogeneous catalysts. Recent advances in the field are reviewed, with particular emphasis on systems immobilized onto polymeric organic or inorganic supports.

CuO nanostructures of variable shapes as an efficient catalyst for [3 + 2] cycloaddition of azides with terminal alkyne

CuO nanowires exhibited highest catalytic efficiency for the cycloaddition reaction between azide and terminal alkyne, featuring short reaction time, soft reaction conditions and complete regioselectivity.

The use of reduced copper metal–organic frameworks to facilitate CuAAC click chemistry

A reduced copper metal–organic framework (rCu-MOF) containing Cu^I ions was prepared and employed as a catalyst for ‘Click’ reactions. The rCu-MOF presents higher catalytic activity, good structural stability as well as facile recyclability compared to traditional copper halide catalysts.