Removal of Nitric Oxide through Visible Light Photocatalysis by g-C3N4 Modified with Perylene Imides

Tailoring local electron density and molecular oxygen activation behavior via potassium/halogen co-tuned graphitic carbon nitride for enhanced photocatalytic activity

Graphite carbon nitride (g-C3N4) is a promising photocatalyst,but its inadequate reactive sites, weak visible light responsiveness, and sluggish separation of photogenerated carriers hamperthe improvement of photodegradation efficiency. In this work, potassium (K) and halogen atoms co-modified g-C3N4 photocatalysts (CN-KX, X = F, Cl, Br, I) were constructed to adjust the electrical and band structure for enhanced generation of reactive oxygen species. Through an integration of theoretical calculation and experimental exploration, the doping sites of halogen atoms as well as the evolution of crystal, band, and electronic structures were investigated. The results show that a covalent bond is formed between the F atom and the C atom, substitution of the N atom occurs with a Cl atom, and doping of Br, I, or K atoms takes place at the interstitial site. CN-KX photocatalysts exhibits lower band gap, faster photogenerated electron migration, and enhanced photocatalytic activity. Specifically, the CN-KI photocatalyst exhibits the highest photodegradation efficiency because of its smaller interplanar spacing, formation of the midgap state, and adjustable local electron density. Equally, the doping of I atom not only provides a stable adsorption site for oxygen (O2) but also facilitates electron transfer, promoting the production of superoxide radicals (O2-) and contributing to the process of photodegradation.

Hydrogen Peroxide Heterolytic Cleavage Induced Gas Phase Photo-Fenton Oxidation of Nitric Oxide

Nitric oxide (NO) is one of the major air pollutants that may cause ecological imbalance and severe human disease. However, the removal of NO faces challenges of low efficiency, high energy consumption, and production of toxic NO2 byproducts. Herein, we report an efficient *OOH intermediate-involved NO oxidation route with high NO3- selectivity via a gas phase photo-Fenton system. Fe single atoms (Fe SAs)-anchored NH2-UiO-66(Zr) (Fe SAs@NU) was synthesized. The five-coordinated Fe SAs undergo a transient structure reconstitution during the photo-Fenton process, which enables a novel heterolytic cleavage pathway of H2O2 to derive specific ·OOH/·O2- radicals as reactive oxygen species. Therefore, a high NO (550 parts per billion) removal rate of 81% (NO3- selectivity up to 99%) is achieved under visible-light irradiation (>420 nm). This study provides new insight for the high-performance photo-Fenton process via a transient structure reconstitution pathway for the removal of gas phase NOx pollutants.

An Appraisal for Providing Charge Transfer (CT) Through Synthetic Porous Frameworks for their Semiconductor Applications

In recent years, there has been considerable focus on the development of charge transfer (CT) complex formation as a means to modify the band gaps of organic materials. In particular, CT complexes alternate layers of aromatic molecules with donor (D) and acceptor (A) properties to provide inherent electrical conductivity. In particular, the synthetic porous frameworks as attractive D-A components have been extensively studied in recent years in comparison to existing D-A materials. Therefore, in this work, the synthetic porous frameworks are classified into conjugated microporous polymers (CMPs), covalent organic frameworks (COFs), and metal-organic frameworks (MOFs) and compare high-quality materials for CT in semiconductors. This work updates the overview of the above porous frameworks for CT, starting with their early history regarding their semiconductor applications, and lists CT concepts and selected key developments in their CT complexes and CT composites. In addition, the network formation methods and their functionalization are discussed to provide access to a variety of potential applications. Furthermore, several theoretical investigations, efficiency improvement techniques, and a discussion of the electrical conductivity of the porous frameworks are also highlighted. Finally, a perspective of synthetic porous framework studies on CT performance is provided along with some comparisons.

Solar-Light-Driven Photocatalytic Oxidative Coupling of Phenol Derivatives over Bismuth-Based Porous Metal Halide Perovskites

The selective oxidative coupling of phenol derivatives, involving carbon-carbon (C-C) and carbon-oxygen (C-O) bond formation, has emerged as a critical approach in the synthesis of natural products. However, achieving precise control over the selectivity in coupling reactions of unsubstituted phenols utilizing solar light as the driving force remains a big challenge. In this study, we report a series of porous Cs3Bi2X9 (X=Cl, Br, I) photocatalysts with tailored band gaps and compositions engineered for efficient solar-light-driven oxidative phenol coupling. Notably, p-Cs3Bi2Br9 exhibited about 73 % selectivity for C-C coupling, displaying a high formation rate of 47.3 μmol gcat -1 h-1 under solar radiation. Furthermore, this approach enables control of the site-selectivity for phenol derivatives on Cs3Bi2X9, enhancing C-C coupling. The distinctive porous structure and appropriate band-edge positions of Cs3Bi2Br9 facilitated efficient charge separation, and surface interaction/activation of phenolic hydroxyl groups, resulting in the kinetically preferred formation of C-C over C-O bond. Mechanistic insights into the reaction pathway, supported by comprehensive control experiments, unveiled the crucial role of interfacial charge transfers and Lewis acid Bi sites in stabilizing phenolic intermediates, thereby directing the regioselectivity of diradical couplings and resulting in the formation of unsymmetrical biphenols.

Anthraquinone-Induced asymmetric antimony coordination center for selective O2 photoreduction to H2O2

Achieving O2 photoreduction to H2O2 with high selectivity control and durability while using easily accessible catalyst requires new synthesis strategies. Herein, we propose an asymmteric Sb coordination active center strategy of introducing anthraquinone (AQ) and heptazine to form local N3 - Sb - O coordination by a rapid and simple explosive crystallization approach, resulting in a mesoporous conjugated heptazine-amide-AQ polymer coordinated Sb (HAAQ-Sb). It is demonstrated that the N3 - Sb - O coordination effectively suppresses the charge recombination and acts as the highly active site for O2 adsorption. Moreover, as-introduced AQ units initiate low-barrier hydrogen transfer through a reversible redox process that triggers highly-efficient H2O2 production. A superior apparent quantum yield of 20.2 % at 400 nm and a remarkable solar-to-chemical conversion efficiency of 0.71 % are achieved on the optimal HAAQ-Sb, which is the highest among C3N4-based photocatalysts at present. This asymmetric coordination concept and material design method provide new perspectives for the research of novel catalysts toward artificial photosynthesis.

Recent updates on remediation approaches of environmentally occurring pollutants using visible light-active nano-photocatalysts

Photocatalysis emerges as a potential remedy for the issue of an unreliable light source. Recognized as the most dependable and potent energy source sustaining life on Earth, sunlight offers a promising solution. Sunlight is abundant and free, operational costs associated with running photocatalytic system using nanoparticles are often lower compared to system relying on artificial light source. The escalating problem of water pollution, particularly in highly industrialized nations, necessitates effective wastewater treatment methods. These methods aim to combat elevated pollution levels, encompassing pharmaceuticals, dyes, flame retardants, and pesticide components. Advanced oxidation processes within photocatalytic wastewater treatment exhibit substantial promise for removing complex organic pollutants. Doped nanomaterials, with their enhanced properties, enable efficient utilization of light. Coupled nanomaterials present significant potential in addressing both water and energy challenges by proficiently eliminating persistent pollutants from environment. Photocatalysis when exposed to sunlight can absorb photons and generate e- h + pairs. This discussion briefly outlines the wastewater treatment facilitated by interconnected nanomaterials, emphasizing their role in water-energy nexus. In exploring the capabilities of components within a functional photocatalyst, a comprehensive analysis of both simple photocatalysts and integrated photocatalytic systems is undertaken. Review aims to provide detailed explanation of the impact of light source on photon generation and significance of solar light on reaction kinetics, considering various parameters such as catalyst dosage, pH, temperature, and types of oxidants. By shedding light on these aspects, this review seeks to enhance our understanding of intricate processes involved in photocatalysis and its potential applications in addressing contemporary environmental challenges.

Molecular oxygen activation: Innovative techniques for environmental remediation

Molecular oxygen as a green, non-toxic, and inexpensive oxidant has displayed numerous advantages compared with other oxidants for more sustainable and environmentally benign pollutant degradation. Molecular oxygen activation stands as a groundbreaking approach in advanced oxidation processes, offering efficient environmental remediation with minimal environmental impact with the production of high-oxidation reactive oxygen species (ROS). The adaptability and energy efficiency of molecular oxygen activation significantly contribute to the progression of sustainable water remediation technologies. This review meticulously explores the principles and mechanisms of molecular oxygen activation, shedding light on the diverse ROS production pathways. Subsequently, this review comprehensively details contemporary activation approaches, including photocatalytic activation, electrocatalytic activation, piezoelectric activation, and photothermal activation, explicating their distinct activation mechanisms. Additionally, it delves into the promising applications of molecular oxygen activation in the degradation of water pollutants, primary air pollutants, and volatile organic compounds, providing an in-depth analysis of the associated degradation pathways and mechanisms. Moreover, this review also addresses the imminent challenges and emerging opportunities in environmental remediation. It is envisioned that this comprehensive analysis will spur ongoing exploration and innovation in the use of molecular oxygen activation for environmental remediation and beyond.

Advances in photocatalytic NO oxidation by Z-scheme heterojunctions

The fast development of urbanisation and industrialisation has led to a rise in nitrogen oxide (NOx) emissions, specifically nitric oxide (NO). One effective method for reducing the harmful effects of this dangerous air pollutant on both human health and the environment is the photocatalytic oxidation of NO. Z-scheme heterojunctions enhance incident light utilisation and increase photocatalytic activity, eventually leading to better NO oxidation performance by encouraging the effective separation of charges and migration. A comprehensive discussion of Z-scheme-based heterojunctions is provided in this review paper, with a focus on their applications in the photocatalytic oxidation of NO. Significant progress has been made in the fabrication of efficient photocatalytic devices in recent years, with Z-scheme-based heterojunctions proving to be particularly successful. The review looks into the various methodologies used to create Z-scheme-based heterojunctions as well as photocatalytic NO oxidation mechanisms. Recent studies on photocatalysts employing Z-scheme heterojunctions for the photocatalytic oxidation of NO are also discussed. The possibilities for new opportunities as well as the present challenges, barriers, advances, and solutions have been emphasized.

Donor-acceptor engineered g-C3N4 enabling peroxymonosulfate photocatalytic conversion to 1O2 with nearly 100% selectivity

Singlet oxygen (¹O₂) is a thrilling active species for selectively oxidating organic substances. However, the efficient and selective generation of ¹O₂ maintains a great challenge. Here, we develop a donor-acceptor structured g-C₃N₄ by covalently engineering benzenetricarboxaldehyde (BTA) onto the fringe of g-C₃N₄. The g-C₃N₄-BTA exerts high-efficiency ¹O₂ generation with nearly 100% selectivity via peroxymonosulfate (PMS) photocatalytic activation upon visible light illumination, exhibiting obviously boosted efficiency for selective elimination of atrazine (ATZ). The consequences of experiments and theoretical calculations demonstrate that BTA units serve as electron-withdrawing sites to trap photogenerated electrons and facilitate the adsorption of PMS on the electron-deficient heptazine rings of g-C₃N₄. As such, PMS can be in-situ oxidated by the photogenerated holes to selectively produce ¹O₂. Besides, the g-C₃N₄-BTA/PMS system delivers high stability and strong resistance to the coexisting organic ions and natural organic matter, demonstrating great potential for selectively removing targeted organic contaminants with high efficiency.

Dual-quantum-dots heterostructure with confined active interface for promoted photocatalytic NO abatement

Constructing heterostructure is an effective way to fabricate advanced photocatalysts. However, the catalytic performance of typical common multi-dimensional bulk heterostructure still suffers from the limited active interface and inefficient carrier migration. Herein, we successfully synthesize the SnO₂/Cs₃Bi₂I₉ dual-quantum-dots nanoheterostructure (labeled as SCX, X = 1, 2, 3) for efficiently and stably photocatalytic NO removal under visible light irradiation. The NO removal rate of SC2 is almost 8 and 17 times higher than that of the single SnO₂ and Cs₃Bi₂I₉, respectively. Moreover, the SC2 photocatalyst shows only 3 % attenuation after five consecutive cycles, demonstrating good photocatalytic stability. Systematic experimental characterization and theoretical density functional theory calculations revealed that the high activity and stability of SCX originated from the efficient charge transfer at the confined interface between SnO₂ and Cs₃Bi₂I₉ quantum dots. This work provides a new perspective for constructing innovative dual-quantum-dots nanoheterostructure and assesses their potential in photocatalytic environmental applications.

New insight into enhanced photocatalytic selectivity of g-C3N4 by nitrogen vacancy introduction: Experimental study and theoretical calculation

Constructing photocatalyst with both high efficiency and selectivity is highly desired in water treatment process. However, it is difficult to realize the selectivity of photocatalysis due to the non-selective oxidative species produced in this process. Herein, for the first time, the photocatalytic selectivity was achieved on g-C₃N₄ (CN) through N vacancy introduction for effective removal of organic pollutants, and the mechanism of vacancy induced selectivity enhancement was studied. The nitrogen vacancy modified CN (VCN) showed enhanced photocatalytic activity and unique selectivity towards phenolic compounds with electron-donating group, whose kinetic constant for p-aminophenol (p-NH₂) degradation was 5.95 times higher than that over CN. Moreover, VCN photocatalytic system also displayed similar selectivity in binary pollutant systems. Characteristics and theoretical calculation results confirmed the enhanced photocatalytic performance and selectivity of VCN was mainly attributed to the effect of N vacancy. On one hand, electron-deficient N vacancy enhanced the adsorption of the O₂ and phenolic compounds, which promoted the production of O₂^•- and strengthened the photocatalytic surface reaction. On the other hand, the N vacancy preferred to adsorb the electron-donating groups of phenolic compounds, which resulted in their selective removal.

The excellent photocatalytic NO removal performance relates to the synergistic effect between the prepositive NaOH solution and the g-C3N4 photocatalysis

Photocatalysis technology is used to remove the low concentration NO in recent years. However, the effect of this process is not very satisfactory. In this study, it was found that the prepositive NaOH solution could significantly improve the photocatalytic NO removal activity of g-C₃N₄. The apparent quantum yield of g-C₃N₄ in the NO removal process was increased 3.5 times by the prepositive NaOH solution. The reason is that there was a synergistic effect formed between the prepositive NaOH solution and the photocatalytic NO removal process. The prepositive NaOH solution not only could increase the humidity and pH value in the photocatalytic unit, but also could improve the adsorption ability of g-C₃N₄ for the H₂O, NO, and O₂. Moreover, the prepositive NaOH solution reduced the difficulty of the photogenerated carriers' transport and the ·OH generation. This study provided a new idea for the removal of low-concentration NOx.

Polarization Engineering of Covalent Triazine Frameworks for Highly Efficient Photosynthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Two-electron oxygen photoreduction to hydrogen peroxide (H₂ O₂ ) is seriously inhibited by its sluggish charge kinetics. Herein, a polarization engineering strategy is demonstrated by grafting (thio)urea functional groups onto covalent triazine frameworks (CTFs), giving rise to significantly promoted charge separation/transport and obviously enhanced proton transfer. The thiourea-functionalized CTF (Bpt-CTF) presents a substantial improvement in the photocatalytic H₂ O₂ production rate to 3268.1 µmol h^-1 g^-1 with no sacrificial agents or cocatalysts that is over an order of magnitude higher than unfunctionalized CTF (Dc-CTF), and a remarkable quantum efficiency of 8.6% at 400 nm. Mechanistic studies reveal the photocatalytic performance is attributed to the prominently enhanced two-electron oxygen reduction reaction by forming endoperoxide at the triazine unit and highly concentrated holes at the thiourea site. The generated O₂ from water oxidation is subsequently consumed by the oxygen reduction reaction (ORR), thereby boosting overall reaction kinetics. The findings suggest a powerful functional-groups-mediated polarization engineering method for the development of highly efficient metal-free polymer-based photocatalysts.

Construction and Activity of an All-Organic Heterojunction Photocatalyst Based on Melem and Pyromellitic Dianhydride

The separation efficiency of photogenerated carriers in the g-C₃ N₄ system could be improved by the construction of all-organic heterojunctions. However, g-C₃ N₄ has a large π-π conjugated plane that induces a low number of amino groups (-NH₂ ), which are the sites of the heterojunction reaction with organic molecules. In this case, few heterojunction knots can be constructed, and the enhancement effect of the heterojunction cannot be fully displayed. In this study, an all-organic heterojunction with PMDA is constructed with melem instead of g-C₃ N₄ . Although the photocatalytic activity of melem is far below that of g-C₃ N₄ , the photocatalytic activity of PI (the all-organic heterojunction constructed with melem) is considerably higher than that of CP (the all-organic heterojunction constructed with g-C₃ N₄ ). This result is attributed to melem that has more -NH₂ groups to form more heterojunction knots, which can enable the effective transfer and separation of electron-hole pairs. These new findings may shed light on the design of all-organic heterojunction photocatalysts.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO₂ was designed for photo-induced treating low-concentration NO_x indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional ^•O₂^- reactive species, a synergic effect between a singlet oxygen (¹O₂) and mobile hydroxyl radicals (^•OH_f) was first illustrated for removing NO_x indoor gas (¹O₂ + 2NO → 2NO₂, NO₂ + ^•OH_f → HNO₃), inhibiting the production of the byproducts of NO₂. This work is helpful for understanding the surface mechanism of photocatalytic NO_x oxidation and provides a new perspective for the development of highly efficient air purification systems.

Covalent Microporous Polymer Nanosheets for Efficient Photocatalytic CO2 Conversion with H2 O

It is still a challenging target to achieve photocatalytic CO₂ conversion to valuable chemicals with H₂ O as an electron donor. Herein, 2D imide-based covalent organic polymer nanosheets (CoPcPDA-CMP NSs), which integrate cobalt phthalocyanine (CoPc) moiety for reduction half-reaction and 3,4,9,10-perylenetetracarboxylic diimide moiety for oxidation half-reaction, are constructed as a Z-scheme artificial photosynthesis system to complete the overall CO₂ reduction reaction. Owing to the outstanding light absorption capacity, charge separation efficiency, and electronic conductivity, CoPcPDA-CMP NSs exhibit excellent photocatalytic activity to reduce CO₂ to CO using H₂ O as a sacrificial agent with a CO production rate of 14.27 µmol g^-1 h^-1 and a CO selectivity of 92%, which is competitive to the state-of-the-art visible-light-driven organic photocatalysts towards the overall CO₂ reduction reaction. According to a series of spectroscopy experiments, the authors also verify the photoexcited electron transfer processes in the CoPcPDA-CMP NSs photocatalytic system, confirming the Z-scheme photocatalytic mechanism. The present results should be helpful for fabricating high-performance organic photocatalysts for CO₂ conversion.

Environment Friendly g-C3N4-Based Catalysts and Their Recent Strategy in Organic Transformations

Organic molecules synthesized in an environmentally friendly manner have excellent therapeutic potential. The entire preparation technique was examined in the existence of a light source, implying that light has been replaced by heating and the usage of dangerous chemicals has decreased, resulting in less pollution of the environment. The advantages of these nanocarbon catalysts include high efficiency, environmentally friendly synthesis, eco-friendly, inexpensive, and non-corrodible. In organic transformations, solid metal base/metal-free catalysts produce better results. Here, the metal-free semiconductor g-C₃N₄ was used to demonstrate the catalytic behavior of organic conversions. g-C₃N₄ is a two-dimensional material and a p‑type semiconductor to enhance the photocatalytic activity. The excellent properties of g-C₃N₄ sheet lead to the support of metals to form metal-organic frameworks. Most of the reactions gained positive response under visible light irradiation. This review will inspire readers in widen the applications of g-C₃N₄ based catalyst in various organic transformation reactions.

Construction of SnNb2O6/MgIn2S4 heterojunction photocatalysts with enhanced visible-light-driven activity for tetracycline hydrochloride degradation and Cr(vi) reduction

A novel type II SnNb2O6/MgIn2S4 composite photocatalyst was prepared. The prepared composite photocatalyst exhibited significantly improved photocatalytic activity for Cr(vi) reduction and tetracycline hydrochloride degradation under visible light.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Photoenzymatic Catalytic Cascade System of a Pyromellitic Diimide/g-C3N4 Heterojunction to Efficiently Regenerate NADH for Highly Selective CO2 Reduction toward Formic Acid

Photocatalytic reduction of carbon dioxide (CO₂) holds great promise for both clean energy and environment protection. However, the low activity and poor selectivity of photocatalysts are the main bottlenecks. Herein, inspired by artificial photosynthesis and taking advantages of high efficiency and specificity of bioenzymes, we marry photo with enzyme to synergistically solve the above problems. A metal-free heterojunction of pyromellitic diimide/g-C₃N₄ (PDI/CN) with an excellent visible light response (λ < 660 nm) is fabricated for achieving a photoenzymatic catalytic cascade system, which efficiently regenerates nicotinamide adenine dinucleotide (NADH) and selectively reduces CO₂ to formic acid (HCOOH). The highest NADH yield of the PDI/CN hybrid achieved is 75%, and the HCOOH generation rate achieved is 1.269 mmol g^-1 h^-1 with nearly 100% selectivity, which is much higher than those of the reported materials. The excellent photocatalytic performance is attributed to the unique photoenzymatic catalytic cascade system, heterointerface effect, good conductivity, and a wide sunlight response range of the PDI/CN heterojunction. This work provides an efficient strategy and a corresponding photocatalyst for the directional conversion of CO₂ to HCOOH.

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

In-plasma-catalysis for NO x degradation by Ti3+ self-doped TiO2-x /γ-Al2O3 catalyst and nonthermal plasma

In an attempt to realize the efficient treatment of NO_x, a mixed catalyst of Ti³⁺ self-doped TiO_2−x and γ-Al₂O₃ was constructed by reducing commercial TiO₂. The degradation effect on NO_x was evaluated by introducing the mixed catalyst into a coaxial dual-dielectric barrier reactor. It was found that the synthesized TiO_2−x could achieve considerable degradation effects (84.84%, SIE = 401.27 J L⁻¹) in a plasma catalytic system under oxygen-rich conditions, which were better than those of TiO₂ (73.99%) or a single plasma degradation process (26.00%). The presence of Ti³⁺ and oxygen vacancies in TiO_2−x resulted in a relatively narrow band gap, which contributed to catalyzing deeply the oxidation of NO_x to NO₂⁻ and NO₃⁻ during the plasma-induced “pseudo-photocatalysis” process. Meanwhile, the TiO_2−x showed an improved discharge current and promoted discharge efficiency, explaining its significant activation effect in the reaction. Reduced TiO_2−x could achieve an impressive degradation effect in a long-time plasma-catalysis process, and still maintained its intrinsic crystal structure and morphology. This work provides a facile synthesis procedure for preparing Ti³⁺ self-doped TiO_2−x with practical and scalable production potential; moreover, the novel combination with plasma also provides new insights into the low-temperature degradation of NO_x.

TiO_2−x has a smaller forbidden band width, more abundant Ti³⁺ and oxygen vacancies, so as to obtain a better and more stable degradation effect of NO_x in plasma-catalysis process.

Visible light-driven novel Bi2Ti2O7/CaTiO3 composite photocatalyst with enhanced photocatalytic activity towards NO removal

Photocatalysis is regarded as a promising technology for removal of nitrogen oxide (NO), however, the low photocatalytic efficiencies under visible light irradiation and the deactivation of the photocatalyst are as yet the significant issues that should be addressed. In this work, visible-light-driven Bi₂Ti₂O₇/CaTiO₃ heterojunction composites were synthesized by a facile in-situ hydrothermal method. The Bi₂Ti₂O₇/CaTiO₃ composites displayed superior visible light photocatalytic activity than pure CaTiO₃ and pure Bi₂Ti₂O₇ in the removal of NO at the 600 ppb level in air. Among all the composites, Bi₂Ti₂O₇/CaTiO₃ containing 20 wt% Bi₂Ti₂O₇ exhibited the best photocatalytic activity, achieving a maximum removal efficiency of 59%. The improved photocatalytic performance is mainly attributed to the strong visible-light-absorbing ability, the presence of an appropriate density of oxygen vacancy defects and the formation of heterojunction between CaTiO₃ and Bi₂Ti₂O₇, resulting in an efficient charge separation at the interface as proven by photoluminescence (PL) and photo-induced current measurements. According to trapping experiments and spin-trapping ESR analysis, the ^•O₂^- and h⁺ are the principal reactive species involved in the photocatalytic NO removal. In addition, the as-obtained Bi₂Ti₂O₇/CaTiO₃ composite showed good chemical stability, which is beneficial for practical applications in air pollution removal.

Carbon-Graphitic Carbon Nitride Hybrids for Heterogeneous Photocatalysis

Polymeric graphitic carbon nitride (g-C₃ N₄ ) and various carbon materials have experienced a renaissance as viable alternates in photocatalysis due to their captivating metal-free features, favorable photoelectric properties, and economic adaptabilities. Although numerous efforts have focused on the integration of both materials with optimized photocatalytic performance in recent years, the direct parameters for this emerging enhancement are not fully summarized yet. Fully understanding the synergistic effects between g-C₃ N₄ and carbon materials on photocatalytic action is vital to further development of metal-free semiconductors in future studies. Here, recent advances of carbon/g-C₃ N₄ hybrids on various photocatalytic applications are reviewed. The dominant governing factors by inducing carbon into g-C₃ N₄ photocatalysts with involving photocatalytic mechanism are highlighted. Five typical carbon-induced enhancement effects are mainly discussed here, i.e., local electric modification, band structure tailoring, multiple charge carrier activation, chemical group functionalization, and abundant surface-modified engineering. Photocatalytic performance of carbon-induced g-C₃ N₄ photocatalysts for addressing directly both the renewable energy storage and environmental remediation is also summarized. Finally, perspectives and ongoing challenges encountered in the development of metal-free carbon-induced g-C₃ N₄ photocatalysts are presented.

Oxygen vacancy-engineered surfaces of ZnO-decorated porous BiOI microspheres for strongly enhanced visible-light NO oxidation

Oxygen vacancy-engineered Surfaces of ZnO-decorated porous BiOI microspheres for strongly enhanced visible-light NO oxidation.

Enhanced photocatalytic activity of ZnO/g-C3N4 composites by regulating stacked thickness of g-C3N4 nanosheets

A self-assembly method was adopted to synthesize loading architecture of ZnO/g-C₃N₄ heterojunction composites by hybridization of g-C₃N₄ nanosheets and ZnO nanoparticles utilizing a refluxing method at a low temperature. More importantly, we provided a novel route to regulate the π-π restacking thickness of the g-C₃N₄ nanosheets among ZnO/g-C₃N₄ composites by the controlling the refluxing time in the ethanol solution, which can optimize the surface hybrid structure, optical response and photocatalytic activity. Among all of samples, ZnO/g-C₃N₄ composites with a refluxing 12 h showed the enhancement of photocatalytic activity. The enhanced visible light photocatalytic activity of ZCN-12 composites can be ascribed to the synergistic effects of the construction of hybrid structures, reduction of structural defects of g-C₃N₄ nanosheets and suitable π-π restacking g-C₃N₄ nanosheets loading thickness.