Experimental and Theoretical Understanding of Nitrogen-Doping-Induced Strong Metal–Support Interactions in Pd/TiO2 Catalysts for Nitrobenzene Hydrogenation

Metal-support interactions in metal oxide-supported atomic, cluster, and nanoparticle catalysis

Supported metal catalysts are essential to a plethora of processes in the chemical industry. The overall performance of these catalysts depends strongly on the interaction of adsorbates at the atomic level, which can be manipulated and controlled by the different constituents of the active material (i.e., support and active metal). The description of catalyst activity and the relationship between active constituent and the support, or metal-support interactions (MSI), in heterogeneous (thermo)catalysts is a complex phenomenon with multivariate (dependent and independent) contributions that are difficult to disentangle, both experimentally and theoretically. So-called "strong metal-support interactions" have been reported for several decades and summarized in excellent review articles. However, in recent years, there has been a proliferation of new findings related to atomically dispersed metal sites, metal oxide defects, and, for example, the generation and evolution of MSI under reaction conditions, which has led to the designation of (sub)classifications of MSI deserving to be critically and systematically evaluated. These include dynamic restructuring under alternating redox and reaction conditions, adsorbate-induced MSI, and evidence of strong interactions in oxide-supported metal oxide catalysts. Here, we review recent literature on MSI in oxide-supported metal particles to provide an up-to-date understanding of the underlying physicochemical principles that dominate the observed effects in supported metal atomic, cluster, and nanoparticle catalysts. Critical evaluation of different subclassifications of MSI is provided, along with discussions on the formation mechanisms, theoretical and characterization advances, and tuning strategies to manipulate catalytic reaction performance. We also provide a perspective on the future of the field, and we discuss the analysis of different MSI effects on catalysis quantitatively.

Polymer-Supported Pd Nanoparticles for Solvent-Free Hydrogenation

Breaking the trade-off between activity and stability of supported metal catalysts has been a long-standing challenge in catalysis, especially for metal nanoparticles (NPs) with high hydrogenation activity but poor stability. Herein, we report a porous poly(divinylbenzene) polymer-supported Pd NP catalyst (Pd/PDVB) with both high activity and excellent stability for the solvent-free hydrogenation of nitrobenzene, even at ambient temperature (25 °C) and H2 pressure (0.1 MPa). Pd/PDVB gave a turnover frequency as high as 22,632 h-1 at 70 °C and 0.4 MPa, exceeding 5556 h-1 of the classical Pd/C catalyst under equivalent conditions. Mechanistic studies reveal that the polymer support benefits the desorption of the aniline product from the Pd surface, which is crucial for rapid hydrogenation under solvent-free conditions. In addition, the polymer support in Pd/PDVB efficiently hindered Pd leaching, resulting in good stability.

Unveiling Atomic-Scaled Local Chemical Order of High-Entropy Intermetallic Catalyst for Alkyl-Substitution-Dependent Alkyne Semihydrogenation

High-entropy intermetallic (HEI) nanocrystals, composed of multiple elements with an ordered structure, are of immense interest in heterogeneous catalysis due to their unique geometric and electronic structures and the cocktail effect. Despite tremendous efforts dedicated to regulating the metal composition and structures with advanced synthetic methodologies to improve the performance, the surface structure, and local chemical order of HEI and their correlation with activity at the atomic level remain obscure yet challenging. Herein, by determining the three-dimensional (3D) atomic structure of quinary PdFeCoNiCu (PdM) HEI using atomic-resolution electron tomography, we reveal that the local chemical order of HEI regulates the surface electronic structures, which further mediates the alkyl-substitution-dependent alkyne semihydrogenation. The 3D structures of HEI PdM nanocrystals feature an ordered (intermetallic) core enclosed by a disordered (solid-solution) shell rather than an ordered surface. The lattice mismatch between the core and shell results in apparent near-surface distortion. The chemical order of the intermetallic core increases with annealing temperature, driving the electron redistribution between Pd and M at the surface, but the surface geometrical (chemically disordered) configurations and compositions are essentially unchanged. We investigate the catalytic performance of HEI PdM with different local chemical orders toward semihydrogenation across a broad range of alkynes, finding that the electron density of surface Pd and the hindrance effect of alkyl substitutions on alkynes are two key factors regulating selective semihydrogenation. We anticipate that these findings on surface atomic structure will clarify the controversy regarding the geometric and/or electronic effects of HEI catalysts and inspire future studies on tuning local chemical order and surface engineering toward enhanced catalysts.

S-scheme homojunction of 0D cubic/2D hexagonal ZnIn2S4 for efficient photocatalytic reduction of nitroarenes

The targeted conversion of toxic nitroarenes to corresponding aminoarenes presents significant promise in simultaneously addressing environmental pollution concerns and producing value-added fine chemicals. In this study, we synthesize a 0D/2D ZnIn2S4 homojunction (CH-ZnIn2S4) by in situ growth of cubic ZnIn2S4 (C-ZnIn2S4) quantum dots onto the surface of ultrathin hexagonal ZnIn2S4 (H-ZnIn2S4) nanosheets for photocatalytic reduction of nitroarenes to aminoarenes using water as a hydrogen donor. The optimal performance of photocatalytic nitro reduction over the 0D/2D CH-ZnIn2S4 homojunction reaches 96.1% within 20 min of visible light irradiation, which is 2.45 and 1.52 times than that of C-ZnIn2S4 (39.3%) and H-ZnIn2S4 (63.3%), respectively. The improved photocatalytic performance can be attributed to the formation of a step-type S-scheme homojunction, characterized by identity chemical composition and natural lattice matching. The configuration enables continuous band bending and a low energy barrier of charge transportation, benefiting the charge transfer across the interface while maximizing their redox capabilities. Furthermore, the 2D structure of H-ZnIn2S4 nanosheets offers abundant surface sites to immobilize the 0D C-ZnIn2S4 that provides ample exposed active sites with low overpotential for HER, thereby ensuring high hydrogenation reduction activity of nitroarenes. The study is expected to inspire further interest in the reasonable design of homojunction structures for efficient and sustainable photocatalytic redox reactions.

Feeble Single-Atom Pd Catalysts for H2 Production from Formic Acid

Single-atom catalysts are thought to be the pinnacle of catalysis. However, for many reactions, their suitability has yet to be unequivocally proven. Here, we demonstrate why single Pd atoms (PdSA) are not catalytically ideal for generating H2 from formic acid as a H2 carrier. We loaded PdSA on three silica substrates, mesoporous silicas functionalized with thiol, amine, and dithiocarbamate functional groups. The Pd catalytic activity on amino-functionalized silica (SiO2-NH2/PdSA) was far higher than that of the thiol-based catalysts (SiO2-S-PdSA and SiO2-NHCS2-PdSA), while the single-atom stability of SiO2-NH2/PdSA against aggregation after the first catalytic cycle was the weakest. In this case, Pd aggregation boosted the reaction yield. Our experiments and calculations demonstrate that PdSA in SiO2-NH2/PdSA loosely binds with amine groups. This leads to a limited charge transfer from Pd to the amine groups and causes high aggregability and catalytic activity. According to the density functional calculations, the loose binding between Pd and N causes most of Pd's 4d electrons in amino-functionalized SiO2 to remain close to the Fermi level and labile for catalysis. However, PdSA chemically binds to the thiol group, resulting in strong hybridization between Pd and S, pulling Pd's 4d states deeper into the conduction band and away from the Fermi level. Consequently, fewer 4d electrons were available for catalysis.

Development of Magnetizable, Nickel-Ferrite-Decorated Carbon Nanocomposites as Hydrogenation Catalyst for Aniline Synthesis

Catalysts with magnetic properties can be easily recovered from the reaction medium without loss by using a magnetic field, which highly improves their applicability. To design such systems, we have successfully combined the magnetic properties of nickel ferrite nanoparticles with the positive properties of carbon-based catalyst supports. Amine-functionalized NiFe2O4 nanoparticles were deposited on the surfaces of nitrogen-doped bamboo-like carbon nanotubes (N-BCNT) and carbon nanolayers (CNL) by using a coprecipitation process. The magnetizable catalyst supports were decorated by Pd nanoparticles, and their catalytic activity was tested through the hydrogenation of nitrobenzene (NB). By using the prepared catalysts, high nitrobenzene conversion (100% for 120 min at 333 K) and a high aniline yield (99%) were achieved. The Pd/NiFe2O4-CNL catalyst was remarkable in terms of stability during the reuse tests due to the strong interaction formed between the catalytically active metal and its support (the activity was retained during four cycles of 120 min at 333 K). Furthermore, despite the long-lasting mechanical stress, no significant palladium loss (only 0.08 wt%) was detected.

Palladium Encapsulated by an Oxygen-Saturated TiO2 Overlayer for Low-Temperature SO2 -Tolerant Catalysis during CO Oxidation

The development of oxidation catalysts that are resistant to sulfur poisoning is crucial for extending the lifespan of catalysts in real-working conditions. Herein, we describe the design and synthesis of oxide-metal interaction (OMI) catalyst under oxidative atmospheres. By using organic coated TiO2 , an oxide/metal inverse catalyst with non-classical oxygen-saturated TiO2 overlayers were obtained at relatively low temperature. These catalysts were found to incorporate ultra-small Pd metal and support particles with exceptional reactivity and stability for CO oxidation (under 21 vol % O2 and 10 vol % H2 O). In particular, the core (Pd)-shell (TiO2 ) structured OMI catalyst exhibited excellent resistance to SO2 poisoning, yielding robust CO oxidation performance at 120 °C for 240 h (at 100 ppm SO2 and 10 vol % H2 O). The stability of this new OMI catalyst was explained through density functional theory (DFT) calculations that interfacial oxygen atoms at Pd-O-Ti sites (of oxygen-saturated overlayers) serve as non-metal active sites for low-temperature CO oxidation, and change the SO2 adsorption from metal(d)-to-SO2 (π*) back-bonding to much weaker σ(Ti-S) bonding.

Embedding Hierarchical Pores by Mechanochemistry in Carbonates with Superior Chemoselective Catalysis and Stability

Hierarchical porosity of carbonates can facilitate their performance in massive applications as compared to their corresponding bulk samples. Traditional solution-based precipitation is typically utilized to fabricate porous carbonates. However, this tactic is generally employed under humid conditions, which demand soluble metal precursors, solvents, and extended dry periods. A salt-assisted mechanochemistry is exploited in contemporary work to settle the shortcomings. Enlighted by solid-state technology, this approach eliminates the utilization of solvents, and the process of ball milling can create pores in 5 min. A range of highly porous carbonates and their derivatives are acquired, with several materials surpassing recording surface areas (e.g., H-CaCO3: 108 m2/g, SrCO3: 125 m2/g, BaCO3: 172 m2/g, Pd/H-CaCO3 catalyst: 101 m2/g). The results display that Pd/H-CaCO3 shows superior catalytic efficiency in the synthesis of aniline (turnover frequency [TON] = 1.33 × 104/h-1, yield ≥ 99%, and recycle stability: 11 cycles) and dye degradation. Combining mechanochemistry and salt-assisted tactic provides a facile and efficient pathway for processing porous materials.

Facet-Controlled Cu2O Support Enhances Catalytic Activity of Pt Nanoparticles for CO Oxidation

The metal-support interaction plays a crucial role in determining the catalytic activity of supported metal catalysts. Changing the facet of the support is a promising strategy for catalytic control via constructing a well-defined metal-support nanostructure. Herein, we developed cubic and octahedral Cu₂O supports with (100) and (111) facets terminated, respectively, and Pt nanoparticles (NPs) were introduced. The in situ characterizations revealed the facet-dependent encapsulation of the Pt NPs by a CuO layer due to the oxidation of the Cu₂O support during the CO oxidation reaction. The CuO layer on Pt at cubic Cu₂O (Pt/c-Cu₂O) significantly enhanced catalytic performance, while the thicker CuO layer on Pt at octahedral Cu₂O suppressed CO conversion. The formation of a thin CuO layer is attributed to the dominant Pt-O-Cu bond at the Pt/c-Cu₂O interface, which suppresses the adsorption of oxygen molecules. This investigation provides insight into designing high-performance catalysts via engineering the interface interaction.

Pd/Co Catalyst with High Pd Atom Utilization Efficiency for Nitrobenzene Hydrogenation at Room Temperature: Experimental and DFT Studies

Enhancing catalytic performance as well as reducing catalyst cost are the eternal pursuit for the catalysis community. Herein, a simple and effective palladium-doped cobalt (Pd/Co) catalyst with high Pd atom utilization efficiency was synthesized via galvanic replacement reaction for the selective hydrogenation of nitrobenzene with H₂ at room temperature, delivering >99 % yield of aniline with up to 158 times higher catalytic activity than commercial palladium powder. Detailed characterizations and DFT calculations revealed that Co-Pd interaction leads to a decrease in electron density of Pd and the distance between Pd atoms that results in the enhanced catalytic performance. Further experiments indicated that the Pd/Co catalyst serves as a highly efficient, selective, and recyclable catalyst for a range of nitroarene substrates. This work might provide a green and sustainable methodology to design and synthesize highly active catalysts with high utilization efficiency of the noble metals in fundamental and applied research.

Recent advances on catalysts for photocatalytic selective hydrogenation of nitrobenzene to aniline

Selective hydrogenation of nitrobenzene (SHN) is an important approach to synthesize aniline, an essential intermediate with extremely high research significance and value in the fields of textiles, pharmaceuticals and dyes. SHN reaction requires high temperature and high hydrogen pressure via the conventional thermal-driven catalytic process. On the contrary, photocatalysis provides an avenue to achieve high nitrobenzene conversion and high selectivity towards aniline at room temperature and low hydrogen pressure, which is in line with the sustainable development strategies. Designing efficient photocatalysts is a crucial step in SHN. Up to now, several photocatalysts have been explored for photocatalytic SHN, such as TiO2, CdS, Cu/graphene and Eosin Y. In this review, we divide the photocatalysts into three categories based on the characteristics of the light harvesting units, including semiconductors, plasmonic metal-based catalysts and dyes. The recent progress of the three categories of photocatalysts is summarized, the challenges and opportunities are pointed out and the future development prospects are described. It aims to give a clear picture to the catalysis community and stimulate more efforts in this research area.

Pyridinic Nitrogen Sites Dominated Coordinative Engineering of Subnanometric Pd Clusters for Efficient Alkynes' Semihydrogenation

Supported metal catalysts have played an important role in optimizing selective semihydrogenation of alkynes for fine chemicals. There into, nitrogen-doped carbons, as a type of promising support materials, have attracted extensive attentions. However, due to the general phenomenon of random doping for nitrogen species in the support, it is still atremendous challenge to finely identify which nitrogen configuration dominates the catalytic property of alkynes' semihydrogenation. Herein, it is reported that uniform mesoporous N-doped carbon spheres derived from mesoporous polypyrrole spheres are used as supports to immobilized subnanometric Pd clusters, which provide a particular platform to research the influence of nitrogen configurations on the alkynes' semihydrogenation. Comprehensive experimental results and density functional theory calculation indicate that pyridinic nitrogen configuration dominates the catalytic behavior of Pd clusters. The high contents of pyridinic nitrogen sites offer abundant coordination sites, which greatly reduces the energy barrier of the rate-determining reaction step and makes Pd clusters own high catalytic activity. The electron effect between pyridinic nitrogen sites and Pd clusters makes the reaction highly selective. Additionally, the good mesostructures also promote the fast transport of substrate. Based on the above, catalyst Pd@PPy-600 exhibits high catalytic activity (99%) and selectivity (96%) for phenylacetylene (C₈ H₆ ) semihydrogenation.

Pd Nanoparticles Supported on N-Doped TiO2 Nanosheets: Crystal Facets, Defective Sites, and Metal-Support Interactions Boost Reforming of Formaldehyde Solution for Hydrogen Production

To produce H₂ from formaldehyde (HCHO), dehydrogenation offers an alternative approach to future hydrogen-based energy sources, but the unsatisfactory efficiency hinders its practical application. Here, ultrafine Pd nanoparticle (NP) decorated N-doped TiO₂ nanosheets exposed with (001) facet catalysts (denoted as Pd/TiO_2-x) have been prepared and exhibit superior H₂ production performance from alkaline HCHO aqueous solution. Under our current conditions, the Pd/TiO_2-x catalyst with a Pd loading of 1 wt % exhibits a H₂ production rate of 183.77 mL/min/g, which is 1.75 and 3.66 times that of Pd/TiO₂ and Pd NPs, respectively. Based on the results of Fourier transform infrared spectroscopy (FTIR), Raman, and liquid-phase electron paramagnetic resonance (EPR) spin-trapping experiments, the excellent H₂ generation of Pd/TiO_2-x can be attributed to the synergistic contribution among the reactive crystal facets, defective sites, and metal-support interactions in boosting the breakage of C-H bonds in HCHO, dissociation of H₂O, and ultimately the formation of H₂. This work is expected to provide a paradigm of an efficient catalyst to produce H₂ from HCHO/H₂O solution.

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Selective catalytic ammonia-to-dinitrogen oxidation (NH₃-SCO) is highly promising for the abatement of NH₃ emissions from flue gas purification devices. However, there is still a lack of high-performance and cost-effective NH₃-SCO catalysts for real applications. Here, highly dispersed, electron-deficient Cu-based catalysts were fabricated using nitrogen-doped carbon nanotubes (NCNT) as support. In NH₃-SCO catalysis, the Cu/NCNT outperformed Cu supported on N-free CNTs (Cu/OCNT) and on other types of supports (i.e., activated carbon, Al₂O₃, and zeolite) in terms of activity, selectivity to the desired product N₂, and H₂O resistance. Besides, Cu/NCNT demonstrated a better structural stability against oxidation and a higher NH₃ storage capacity (in the presence of H₂O vapor) than Cu/OCNT. Quasi in situ X-ray photoelectron spectroscopy revealed that the surface N species facilitated electron transfer from Cu to the NCNT support, resulting in electron-deficient Cu catalysts with superior redox properties, which are essential for NH₃-SCO catalysis. By temperature-programmed surface reaction studies and systematic kinetic measurements, we unveiled that the NH₃-SCO reaction over Cu/NCNT proceeded via the internal selective catalytic reaction (i-SCR) route; i.e., NH₃ was oxidized first to NO, which then reacted with NH₃ and O₂ to form N₂ and H₂O. This study paves a new route for the design of highly active, H₂O-tolerant, and low-cost Cu catalysts for the abatement of slip NH₃ from stationary emissions via selective oxidation to N₂.

Extraordinary p-d Hybridization Interaction in Heterostructural Pd-PdSe Nanosheets Boosts C-C Bond Cleavage of Ethylene Glycol Electrooxidation

Advanced electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells are strongly desired owing to the higher energy efficiency. Herein, Pd-PdSe heterostructural nanosheets (Pd-PdSe HNSs) have been successfully fabricated via a one-step approach. These Pd-PdSe HNSs feature unique electronic and geometrical structures, in which unconventional p-d hybridization interactions and tensile strain effect co-exist. Compared with commercial Pd/C and Pd NSs catalysts, Pd-PdSe HNSs display 5.5 (6.6) and 2.5 (2.6) fold enhancement of specific (mass) activity for the EG oxidation reaction (EGOR). Especially, the optimum C1 pathway selectivity of Pd-PdSe HNSs reaches 44.3 %, illustrating the superior C-C bond cleavage ability. Electrochemical in situ FTIR spectroscopy and theoretical calculations demonstrate that the extraordinary p-d hybridization interaction and tensile strain effect could effectively reduce the activation energy of C-C bond breaking and accelerate CO* oxidation, boosting the complete oxidation of EG and improving the catalytic performance.

Modulating the Local Coordination Environment of Single-Atom Catalysts for Enhanced Catalytic Performance in Hydrogen/Oxygen Evolution Reaction

Single-atom catalysts (SACs) hold the promise of utilizing 100% of the participating atoms in a reaction as active catalytic sites, achieving a remarkable boost in catalytic efficiency. Thus, they present great potential for noble metal-based electrochemical application systems, such as water electrolyzers and fuel cells. However, their practical applications are severely hindered by intrinsic complications, namely atom agglomeration and relocation, originating from the uncontrollably high surface energy of isolated single-atoms (SAs) during postsynthetic treatment processes or catalytic reactions. Extensive efforts have been made to develop new methodologies for strengthening the interactions between SAs and supports, which could ensure the desired stability of the active catalytic sites and their full utilization by SACs. This review covers the recent progress in SACs development while emphasizing the association between the regulation of coordination environments (e.g., coordination atoms, numbers, sites, structures) and the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The crucial role of coordination chemistry in modifying the intrinsic properties of SACs and manipulating their metal-loading, stability, and catalytic properties is elucidated. Finally, the future challenges of SACS development and the industrial outlook of this field are discussed.

Concurrent Oxidation-Reduction Reactions in a Single System Using a Low-Plasma Phenomenon: Excellent Catalytic Performance and Stability in the Hydrogenation Reaction

The catalytic activity and stability of metal nanocatalysts toward agglomeration and detachment during their preparation on a support surface are major challenges in practical applications. Herein, we report a novel, one-step, synchronized electro-oxidation-reduction "bottom-up" approach for the preparation of small and highly stable Cu nanoparticles (NPs) supported on a porous inorganic (TiO₂@SiO₂) coating with significant catalytic activity and stability. This unique embedded structure restrains the sintering of CuNPs on a porous TiO₂@SiO₂ surface at a high temperature and exhibits a high reduction ratio (100% in 60 s) and no decay in activity even after 30 cycles (>98% conversion in 3 min). This occurs in a model reaction of 4-nitrophenol (4-NP) hydrogenation, far exceeding the performance of most common catalysts observed to date. More importantly, nitroarene, ketone/aldehydes, and organic dyes were reduced to the corresponding compounds with 100% conversion. Density functional theory (DFT) calculations of experimental model systems with six Cu, two Fe, and four Ag clusters anchored on the TiO₂ surface were conducted to verify the experimental observations. The experimental results and DFT calculations revealed that CuNPs not only favor the adsorption on the TiO₂ surface over those of Fe and AgNPs but also boost the adsorption energy and activity of 4-NP. This strategy has also been extended to the preparation of other single-atom catalysts (e.g., FeNPs-TiO₂@SiO₂ and AgNPs-TiO₂@SiO₂), which exhibit excellent catalytic performance.

Feeding Carbonylation with CO2 via the Synergy of Single-Site/Nanocluster Catalysts in a Photosensitizing MOF

Solar-driven carbonylation with CO₂ replacing toxic CO as a C1 source is of considerable interest; however it remains a great challenge due to the inert CO₂ molecule. Herein, we integrate cobalt single-site and ultrafine CuPd nanocluster catalysts into a porphyrin-based metal-organic framework to construct composite photocatalysts (Cu₁Pd₂)_z@PCN-222(Co) (z = 1.3, 2.0, and 3.0 nm). Upon visible light irradiation, excited porphyrin can concurrently transfer electrons to Co single sites and CuPd nanoclusters, providing the possibility for coupling CO₂ photoreduction and Suzuki/Sonogashira reactions. This multicomponent synergy in (Cu₁Pd₂)_1.3@PCN-222(Co) can not only replace dangerous CO gas but also dramatically promote the photosynthesis of benzophenone in CO₂ with over 90% yield and 97% selectivity under mild condition. Systematic investigations clearly decipher the function and collaboration among different components in these composite catalysts, highlighting a new insight into developing a sustainable protocol for carbonylation reactions by employing greenhouse gas CO₂ as a C1 source.

Highly active Ni/Fe3O4/TiO2 nanocatalysts with tunable interfacial interactions for PH3 decomposition

The mixed-metal oxide Ni/Fe₃O₄/TiO₂ with two metal-oxide interfaces to catalyze sequential chemical reactions was first applied in the decomposition of phosphine gas for yellow phosphorus (P₄) production. The catalyst was prepared with tunable Ni-Fe₃O₄ and Ni-TiO₂ interactions via annealing and subsequent reduction. Ni/Fe₃O₄/TiO₂ exhibited significantly effective activity and good stability in the PH₃ decomposition, which were achieved by modulating the metal-support interaction. The characterizations by scanning electron microscopy(SEM), X-ray diffraction analysis(XRD), BET surface area measurement and X-ray photoelectron spectroscopy(XPS) were carried out. The enhancements of the Ni-Fe₃O₄ and Ni-TiO₂ dual interactions by annealing and reduction were verified and the mechanism of PH₃ decomposition over the modulated Ni/Fe₃O₄/TiO₂ catalyst was investigated. NiOOH as an active catalytic intermediate species is produced by the synergistic catalytical dual interfaces. The catalytic reaction pathways of PH₃ decomposition by the dual interfaces were firstly revealed. The results provide underlying insights in the way to promote the catalytic performance for synergistic catalysis in PH₃ decomposition.

Oxygen vacancy and nitrogen doping collaboratively boost performance and stability of TiO2-supported Pd catalysts for CO2 photoreduction: a DFT study

The regulation of interfacial charge transfer, optimization of active sites, and maintenance of stability are effective strategies for improving catalytic performance. The effect of the oxygen vacancy (V_O) and nitrogen doping on these parameters for CO₂ photoreduction on Pd₁₀/TiO₂(101) was studied using density functional theory calculations. The results demonstrate that introduction of the V_O could trigger reversed electron transfer, making the V_O and Pd atoms the active center for CO₂ reduction. However, the V_O is repaired by the dissociated O atom. The combined effect of the V_O and N is related to the position of N. Although the substitutional N (N_S) can delocalize electrons at the V_O, it cannot improve the activity and stability. The interstitial N (N_i) located below the V_O forms N_i-Ti bonds with two Ti atoms adjacent to the V_O. This can delocalize the electrons near the V_O, and the five-fold-coordinated titanium (Ti_5C) replaces the V_O as the active center, thus enhancing the reactivity and protecting the V_O. Further research indicates that the co-modification of the V_O and N_i improves photoexcited electron transfer and distribution, which would in turn promote CO₂ reduction. The results of this study propose that surface defect engineering holds great promise for boosting CO₂ photoreduction by integrating functions of electron density modulation and catalysis.

Dual metal nanoparticles within multicompartmentalized mesoporous organosilicas for efficient sequential hydrogenation

Controlling localization of multiple metal nanoparticles on a single support is at the cutting edge of designing cascade catalysts, but is still a scientific and technological challenge because of the lack of nanostructured materials that can not only host metal nanoparticles in different sub-compartments but also enable efficient molecular transport between different metals. Herein we report a multicompartmentalized mesoporous organosilica with spatially separated sub-compartments that are connected by short nanochannels. Such a unique structure allows co-localization of Ru and Pd nanoparticles in a nanoscale proximal fashion. The so designed cascade catalyst exhibits an order of magnitude activity enhancement in the sequential hydrogenation of nitroarenes to cyclohexylamines compared with its mono/bi-metallic counterparts. Crucially, an interesting phenomenon of neighboring metal-assisted hydrogenation via hydrogen spillover is observed, contributing to the significant enhancement in catalytic efficiency. The multicompartmentalized architectures along with the revealed mechanism of accelerated hydrogenation provide vast opportunity for designing efficient cascade catalysts.

The Role of Nitrogen-doping in the Catalytic Transfer Hydrogenation of Phenol to Cyclohexanone with Formic Acid over Pd supported on Carbon Nanotubes

Highly selective one‐step hydrogenation of phenol to cyclohexanone, an important intermediate in the production of nylon 6 and nylon 66, is desirable but remains a challenge. Pd nanoparticles supported on nitrogen‐ and oxygen‐functionalized carbon nanotubes (NCNTs, OCNTs) were prepared, characterized, and applied in the hydrogenation of phenol to cyclohexanone to study the effect of N‐doping. Almost full conversion of phenol with high selectivity to cyclohexanone was achieved over Pd/NCNT under mild reaction conditions using either H₂ or formic acid (FA) as a hydrogen source. The effects of reaction temperature and FA/phenol ratio and the reusability were investigated. Separate FA decomposition experiments without and with the addition of phenol were performed to investigate the reaction mechanism, especially the deactivation behavior. Deactivation was observed for both catalysts during the FA decomposition, while only Pd/OCNT rather than Pd/NCNT was deactivated in the transfer hydrogenation with FA and the FA decomposition in the presence of phenol, indicating the unique role of N‐doping. Therefore, we assume that deactivation is caused by the strongly bound formates on the active Pd sites, suppressing further FA decomposition and/or transfer hydrogenation on Pd. The nonplanar adsorption of phenol on NCNTs via weak O−H⋅⋅⋅N interactions enables the occurrence of the subsequent hydrogenation by adsorbed formate on Pd.

Photoinduced Strong Metal-Support Interaction for Enhanced Catalysis

Strong metal-support interaction (SMSI) construction is a pivotal strategy to afford thermally robust nanocatalysts in industrial catalysis, but thermally induced reactions (>300 °C) in specific gaseous atmospheres are generally required in traditional procedures. In this work, a photochemistry-driven methodology was demonstrated for SMSI construction under ambient conditions. Encapsulation of Pd nanoparticles with a TiO_x overlayer, the presence of Ti³⁺ species, and suppression of CO adsorption were achieved upon UV irradiation. The key lies in the generation of separated photoinduced reductive electrons (e^-) and oxidative holes (h⁺), which subsequently trigger the formation of Ti³⁺ species/oxygen vacancies (O_v) and then interfacial Pd-O_v-Ti³⁺ sites, affording a Pd/TiO₂ SMSI with enhanced catalytic hydrogenation efficiency. The as-constructed SMSI layer was reversible, and the photodriven procedure could be extended to Pd/ZnO and Pt/TiO₂.

Three-Dimensional Network Pd-Ni/γ-Al2O3 Catalysts for Highly Active Catalytic Hydrogenation of Nitrobenzene to Aniline under Mild Conditions

In view of the current situation of high cost and low catalytic efficiency of the commercial Pd-based catalysts, adding transition metals (Ni, Co, etc.) to form the Pd-M bimetallic catalyst not only reduces the consumption of Pd but also greatly improves the catalytic activity and stability, which has attracted increasing attention. In this work, the three-dimensional network Pd-Ni bimetallic catalysts were prepared successfully by a liquid-phase in situ reduction method with the hydroxylated γ-Al₂O₃ as the support. Through investigating the effects of the precursor salt amount, reducing agent concentration, stabilizer concentration, and reducing stirring time on the synthesis of the Pd-Ni nanocatalyst, the three-dimensional network Pd-Ni bimetallic nanostructures with four different atomic ratios were prepared under an optimal condition. The obtained wire-like Pd-Ni catalysts have a uniform diameter size of about 5 nm and length up to several microns. After closely combining with the hydroxylated γ-Al₂O₃, the supported Pd-Ni/γ-Al₂O₃ catalysts exhibit nearly 100% conversion rate and selectivity for the hydrogenation of nitrobenzene to aniline at low temperature and normal pressure. The stability testing of the supported Pd-Ni/γ-Al₂O₃ catalysts shows that the conversion rate still remained above 99% after 10 cycles. There is no doubt that the supported catalysts show significant catalytic efficiency and recyclability, which provides important theoretical basis and technical support for the preparation of low-cost, highly efficient catalysts for the hydrogenation of nitrobenzene to aniline.

Synthesis and characterization of highly dispersed bimetallic Au-Rh nanoparticles supported on titanate nanotubes for CO oxidation reaction at low temperature

Low-temperature CO oxidation was carried out by using rhodium incorporated into titanate nanotubes (Rh/NTs) prepared by the sol-gel and hydrothermal methods; otherwise, gold nanoparticles were deposited homogeneously onto the Rh/NT surface through the deposition-precipitation with urea (DPU) method. The Au-Rh/NT sample exhibited high metal dispersion (55%), outstanding CO oxidation at low temperature, and better resistance to deactivation than the monometallic Rh/NT and Au/NT samples. The characterization of bimetallic samples, with particle sizes from 1 to 3 nm, revealed the remarkable presence of interacting Au and Rh species in metallic state. In this way, Au⁰ and Rh⁰ were answerable for the higher catalytic activity observed in the bimetallic samples. The interaction between Au and Rh in the nanoparticles of Au-Rh/NT promoted a synergistic effect on the CO oxidation reaction, explained by the creation of new CO adsorption sites.

Formic Acid-Assisted Selective Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Bifunctional Pd Nanoparticles Supported on N-Doped Mesoporous Carbon

Biomass‐derived 5‐hydroxymethylfurfural (HMF) is regarded as one of the most promising platform chemicals to produce 2,5‐dimethylfuran (DMF) as a potential liquid transportation fuel. Pd nanoparticles supported on N‐containing and N‐free mesoporous carbon materials were prepared, characterized, and applied in the hydrogenolysis of HMF to DMF under mild reaction conditions. Quantitative conversion of HMF to DMF was achieved in the presence of formic acid (FA) and H₂ over Pd/NMC within 2 h. The reaction mechanism, especially the multiple roles of FA, was explored through a detailed comparative study by varying hydrogen source, additive, and substrate as well as by applying in situ ATR‐IR spectroscopy. The major role of FA is to shift the dominant reaction pathway from the hydrogenation of the aldehyde group to the hydrogenolysis of the hydroxymethyl group via the protonation by FA at the C‐OH group, lowering the activation barrier of the C−O bond cleavage and thus significantly enhancing the reaction rate. XPS results and DFT calculations revealed that Pd²⁺ species interacting with pyridine‐like N atoms significantly enhance the selective hydrogenolysis of the C−OH bond in the presence of FA due to their high ability for the activation of FA and the stabilization of H⁻.

A Pt3 cluster anchored on a C2N monolayer as an efficient catalyst for electrochemical reduction of nitrobenzene to aniline: a computational study

A Pt3 cluster anchored on h-C2N exhibits ultra-high catalytic activity towards nitrobenzene reduction with a small limiting potential (−0.19 V).

Photo-driven selective CO2 reduction by H2O into ethanol over Pd/Mn–TiO2: suitable synergistic effect between Pd and Mn sites

The Mn–Pd interaction of Pd/Mn–TiO₂ is a promising catalyst to enhance C₂H₅OH selectivity since Pd with a strong ability to capture and transport electrons and Mn with multifarious activation of the reactant (CO₂ and H₂O).

Hydrogenation of Furfural to Cyclopentanone under Mild Conditions by a Structure-Optimized Ni-NiO/TiO2 Heterojunction Catalyst

The catalytic conversion of biomass-derived furfural (FFA) into cyclopentanone (CPO) in aqueous solution is an important pathway to obtain sustainable resources. However, the conversion and selectivity under mild conditions are still unsatisfactory. In this study, a catalyst consisting of Ni-NiO heterojunction supported on TiO₂ with optimized composition of anatase and rutile (Ni-NiO/TiO₂ -Re450) is prepared by pyrolysis at 450 °C. With Ni-NiO/TiO₂ -Re450, as catalyst, complete conversion of FFA and 87.4 % yield of CPO are achieved under mild reaction conditions (1 MPa, 140 °C, 6 h). 95.4 % FFA conversion is retained up to the fifth run, indicating the high stability of the catalyst. Multiple characterizations, control experiments, and theoretical calculations demonstrate that the good catalytic performance of Ni-NiO/TiO₂ -Re450 can be attributed to a synergistic effect of the Ni-NiO heterojunction and the TiO₂ support. This low-cost catalyst may expedite the catalytic upgrading and practical application of biomass-derived chemicals.

Anchoring of palladium nanoparticles on N-doped mesoporous carbon

Pd nanoparticles deposited on nitrogen-doped mesoporous carbon are promising catalysts for highly selective and effective catalytic hydrogenation reactions. To design and utilize these novel catalysts, it is essential to understand the effect of N doping on the metal-support interactions. A combined experimental (X-ray photoelectron spectroscopy) and computational (density functional theory) approach is used to identify preferential adsorption sites and to give detailed explanations of the corresponding metal-support interactions. Pyridinic N atoms turned out to be the preferential adsorption sites for Pd nanoparticles on nitrogen-doped mesoporous carbon, interacting through their lone pairs (LPs) with the Pd atoms via N-LP - Pd dσ and N-LP - Pd s and Pd dπ - π* charge transfer, which leads to a change in the Pd oxidation state. Our results evidence the existence of bifunctional palladium nanoparticles containing Pd0 and Pd2+ centers.