Catalytic Conversion of Alcohols to Carboxylic Acid Salts and Hydrogen with Alkaline Water

Hydrogen Production through Distinctive C-C Cleavage during Acetic Acid Reforming at Low Temperature

Acetic acid reforming is a green method for sustainable hydrogen production owing to its renewable source from biomass conversion. However, conventional acetic acid reforming would produce various byproducts, including CO, CH4 and so on. Here, we develop a distinctive method for selective hydrogen production from C-C directional cleavage during acetic acid reforming. Completely different from conventional acetic acid reforming process, acetic acid would react with water over organoruthenium catalyst during its C-C cleavage at low temperature, then produce methanol and formic acid (CH3COOH+H2O→CH3OH+HCOOH). Lastly, methanol and formic acid could further decompose into hydrogen and carbon dioxide over organoruthenium selectively. As a result, there is little CO and CH4 produced in the first step of C-C bond cleavage during acetic acid reforming at 100 °C. Hydrogen production rate is up to 26.8 molH2/(h-1*mol-1 Ru) at 150 °C through a tandem catalysis. A mechanism for C-C cleavage of acetic acid is proposed based on intermediate product analysis and density functional theory (DFT) calculation. Firstly, the C-C single bond was transformed into C=C double bond by dropping one H atom to organoruthenium. Then the coming H2O molecule reacted with the C=C bond by an addition reaction, forming methanol and formic acid. This research not only proposes distinctive reaction pathway for hydrogen production from acetic acid reforming, but also provides some inspiration for selective C-C bond cleavage during ethanol reforming.

Progress in C-C and C-Heteroatom Bonds Construction Using Alcohols as Acyl Precursors

Acyl moiety is a common structural unit in organic molecules, thus acylation methods have been widely explored to construct various functional compounds. While the traditional Friedel-Crafts acylation processes work to allow viable construction of arylketones under harsh acid conditions, recent progress on developing acylation methods focused on the new reactivity discovery by exploiting versatile and easily accessible acylating reagents. Of them, alcohols are cheap, have low toxicity, and are naturally abundant feedstocks; thus, they were recently used as ideal acyl precursors in molecule synthesis for ketones, esters, amides, etc. In this review, we display and discuss recent advances in employing alcohols as unusual acyl sources to form C-C and C-heteroatom bonds, with emphasis on the substrate scope, limitations, and mechanism.

Nitronium salts as mild and inexpensive oxidizing reagents toward designing efficient strategies in organic syntheses; A mechanistic investigation based on the DFT insights

Today, introducing and evaluating the performance of novel reagents are an undeniable part of designing a successful synthetic strategy. Herein, we study the efficiency and mechanism of recently synthesized nitronium salts (e.g., NO₂FSO₃, NO₂CF₃SO₃, NO₂HS₂O₇, NO₂BF₄, NO₂PF₆, and NO₂HSO₄) in the oxidation reaction of ethanol to acetic acid, as a model of the primary alcohol transformations to linear carboxylic acid. An aldehyde molecule is the first produced species in this reaction which is converted to the acetic acid molecule in the presence of in situ-produced nitric acid. Concerning the proposed mechanism, among the studied nitronium salts, two different behaviors can be observed in the transition state of the step in which the aldehyde molecule is formed. The calculated barrier energies of this step have been scrutinized by powerful descriptors such as Quantum Theory of Atoms in Molecules (QTAIM), Natural Bond Orbital (NBO), Electrostatic Potential (ESP) surfaces, and Activation Strain Model (ASM). The outcomes of the studied descriptors illustrate that nitronium salts have different performances in progressing the formation of the aldehyde molecule. Indeed, the likeness of the transition state of this step to the products for NO₂FSO₃, NO₂CF₃SO₃, and NO₂HS₂O₇ species is more significant than the others. Accordingly, these reagents have more potential to apply as oxidizing agents in the primary alcohol transformations to linear carboxylic acid.

An enzyme-mimic single Fe-N3 atom catalyst for the oxidative synthesis of nitriles via C─C bond cleavage strategy

The cleavage and functionalization of recalcitrant carbon─carbon bonds is highly challenging but represents a very powerful tool for value-added transformation of feedstock chemicals. Here, an enzyme-mimic iron single-atom catalyst (SAC) bearing iron (III) nitride (FeN₃) motifs was prepared and found to be robust for cleavage and cyanation of carbon-carbon bonds in secondary alcohols and ketones. High nitrile yields are obtained with a wide variety of functional groups. The prepared FeN₃-SAC exhibits high enzyme-like activity and is capable of generating a dioxygen-to-superoxide radical at room temperature, while the commonly reported FeN₄-SAC bearing FeN₄ motifs was inactive. Density functional theory (DFT) calculation reveals that the activation energy of dioxygen activation and the activation energy of the rate-determining step of nitrile formation are lower over FeN₃-SAC than FeN₄-SAC. In addition, DFT calculation also explains the catalyst's high selectivity for nitriles.

Oxidation of Organic Compounds Using Water as the Oxidant with H2 Liberation Catalyzed by Molecular Metal Complexes

Oxidation reactions of organic compounds play a central role in both industrial chemical and material synthesis as well as in fine chemical and pharmaceutical synthesis. While traditional laboratory-scale oxidative syntheses have relied on the use of strong oxidizers, modern large-scale oxidation processes preferentially utilize air or pure O₂ as an oxidant, with other oxidants such as hydrogen peroxide, nitric acid, and aqueous chlorine solution also being used in some processes. The use of molecular oxygen or air as an oxidant has been very attractive in recent decades because of the abundance of air and the lack of wasteful byproduct generation. Nevertheless, the use of high-pressure air or, in particular, pure oxygen can lead to serious safety concerns with improper handling and also necessitates the use of sophisticated high-pressure reactors for the processes.Several research groups, including ours, have investigated in recent times the possibility of carrying out catalytic oxidation reactions using water as the formal oxidant, with no added conventional oxidants. Along with the abundant availability of water, these processes also generate dihydrogen gas as the reaction coproduct, which is a highly valuable fuel. Several well-defined molecular metal complexes have been reported in recent years to catalyze these unusual oxidative reactions with water. A ruthenium bipyridine-based PNN pincer complex was reported by us to catalyze the oxidation of primary alcohols to carboxylate salts with alkaline water along with H₂ liberation, followed by reports by other groups using other complexes as catalysts. At the same time, ruthenium-, iridium-, and rhodium-based complexes have been reported to catalyze aldehyde oxidation to carboxylic acids using water. Our group has combined the catalytic aqueous alcohol and aldehyde oxidation activity of a ruthenium complex to achieve the oxidation of biomass-derived renewable aldehydes such as furfural and 5-hydroxymethylfurfural (HMF) to furoic acid and furandicarboxylic acid (FDCA), respectively, using alkaline water as the oxidant, liberating H₂. Ruthenium complexes with an acridine-based PNP ligand have also been employed by our group for the catalytic oxidation of amines to the corresponding lactams, or to carboxylic acids via a deaminative route, using water. Similarly, we also reported molecular complexes for the catalytic Markovnikov oxidation of alkenes to ketones using water, similar to Wacker-type oxidation, which, however, does not require any terminal oxidant and produces H₂ as the coproduct. At the same time, the oxidation of enol ethers to the corresponding esters with water has also been reported. This account will highlight these recent advances where water was used as an oxidant to carry out selective oxidation reactions of organic compounds, catalyzed by well-defined molecular complexes, with H₂ liberation. The oxidation of alcohols, aldehydes, amines, alkenes, and enol ethers will be discussed to provide an outlook toward other functional groups' oxidation. We hope that this will aid researchers in devising other oxidative dehydrogenative catalytic systems using water, complementing traditional oxidative processes involving strong oxidants and molecular oxygen.

Tuning the selectivity in iridium-catalyzed acceptorless dehydrogenative coupling of primary alcohols

An acceptorless dehydrogenative coupling of primary alcohols to carboxylic acids/carboxylates, esters, and Guerbet alcohols (via both homo- and cross-β-alkylation of the alcohols) in the presence of an N-heterocyclic carbene iridium(I) catalyst was developed under aerobic conditions. The product selectivity can be easily tuned among the products with a single catalyst through simple modification of the reaction conditions, such as the catalyst and base amounts, the choice of base, and the reaction temperature.

Water as a solvent: transition metal catalyzed dehydrogenation of alcohols going green

The long-established practice of using organic solvents in synthetic chemistry is currently becoming a major focus of environmental alarms as many of the chemical wastes are generated in the form of organic solvents. Recently, various alternative solvents have been recognized by the scientific community, including water, ionic liquids, supercritical fluids, glycerol, polyethylene glycol, etc. Among these alternatives, water is unquestionably an ideal solvent as it is abundant, cheap, non-toxic, and non-flammable. In the last few decades, a breakthrough has been achieved in the field of transition metal-catalyzed dehydrogenation of alcohols and the related chemistry for the sustainable synthesis of a wide range of valuable compounds. Although a large number of reports with new potential are published every year following this alcohol dehydrogenation strategy, the utilization of water as a solvent in alcohol dehydrogenation and related coupling reactions is yet to be highlighted properly. This review summarizes the advances in metal-catalyzed dehydrogenative functionalization of alcohols using water as a solvent.

NHC-BIAN-Cu(I)-Catalyzed Friedländer-Type Annulation of 2-Amino-3-(per)fluoroacetylpyridines with Alkynes on Water

The direct catalytic alkynylation/dehydrative cyclization of 2-amino-3-trifluoroacetyl-pyridines on water was developed for the efficient synthesis of a broad range of fluorinated 1,8-naphthyridines from terminal alkynes. A novel N-heterocyclic carbene (NHC) ligand system that combines a π-extended acenaphthylene backbone with sterically bulky pentiptycene pendant groups was successfully utilized in a copper- or silver-mediated cyclization. Computational analysis of the reaction pathway supports our explanation of the different experimental conversions and yields for the set of copper and silver catalysts. The impact of steric hindrance at the metal center and the flexibility of substituents on the imidazole ring of the NHC on catalytic performance are also discussed.

Water oxidation by Brønsted acid-catalyzed in situ generated thiol cation: dual function of the acid catalyst leading to transition metal-free substitution and addition reactions of S-S bonds

An unprecedented water oxidation reaction by a small organic molecule, i.e., the thiol cation generated in situ by Brønsted acid-catalyzed heterolytic cleavage of S-S bond of a disulfide, is observed...

Copper-Catalyzed One-Pot Synthesis of Quinazolinones from 2-Nitrobenzaldehydes with Aldehydes: Application toward the Synthesis of Natural Products

A novel, efficient, and atom-economical approach for the construction of quinazolinones from 2-nitrobenzaldehydes has been unveiled via copper-catalyzed nitrile formation, hydrolysis, and reduction in one pot for the first time. In this reaction, urea is used as a source of nitrogen for nitrile formation, hydrazine hydrate is used for both the reduction of the nitro group and the hydrolysis of nitrile, and atmospheric oxygen is used as the sole oxidant. The method portrays a wide substrate scope with good functional group tolerances. Moreover, this method was applied for the synthesis of schizocommunin, tryptanthrin, phaitanthrin-A, phaitanthrin-B, and 8H-quinazolino[4,3-b]quinazolin-8-one.

Atomically Dispersed Co Clusters Anchored on N-doped Carbon Nanotubes for Efficient Dehydrogenation of Alcohols and Subsequent Conversion to Carboxylic Acids

The catalytic dehydrogenation of readily available alcohols to high value-added carbonyl compounds is a research hotspot with scientific significance. Most of the current research about this reaction is performed with noble metal-based homogeneous catalysts of high price and poor reusability. Herein, highly dispersed Co-cluster-decorated N-doped carbon nanotubes (Co/N-CNTs) were fabricated via a facile strategy and used for the dehydrogenation of alcohols with high efficiency. Various characterization techniques confirmed the presence of metallic Co clusters with almost atomic dispersion, and the N-doped carbon supports also enhanced the catalytic activity of Co clusters in the dehydrogenation reaction. Aldehydes as dehydrogenation products were further transformed in situ to carboxylic acids through a Cannizzaro-type pathway under alkaline conditions. The reaction pathway of the dehydrogenation of alcohols was clearly confirmed by theoretical calculations. This work should provide an effective and simple approach for the accurate design and synthesis of small Co-clusters catalysts for the efficient dehydrogenation-based transformation of alcohols to carboxylic acids under mild reaction conditions.

Heteroditopic Macrobicyclic Molecular Vessels for Single Step Aerial Oxidative Transformation of Primary Alcohol Appended Cross Azobenzenes

A series of oxy-ether tris-amino heteroditopic macrobicycles (L1-L4) with various cavity dimensions have been synthesized and explored for their Cu(II) catalyzed selective single step aerial oxidative cross-coupling of primary alcohol based anilines with several aromatic amines toward the formation of primary alcohol appended cross azobenzenes (POCABs). The beauty of this transformation is that the easily oxidizable benzyl/primary alcohol group remains unhampered during the course of this oxidation due to the protective oxy-ether pocket of this series of macrobicyclic vessels. Various dimensionalities of the molecular vessels have shown specific size complementary selection for substrates toward efficient syntheses of regioselective POCAB products. To establish the requirement of the three-dimensional cavity based additives, a particular catalytic reaction has been examined in the presence of macrobicycles (L2 and L3) versus macrocycles (MC1 and MC2) and tripodal acyclic (AC1 and AC2) analogous components, respectively. Subsequently, L1-L4 have been extensively utilized toward the syntheses of as many as 44 POCABs and are characterized by different spectroscopic techniques and single crystal X-ray diffraction studies.

Direct Oxidation of Primary Alcohols to Carboxylic Acids

Oxidation of primary alcohols to carboxylic acids is a fundamental transformation in organic chemistry, yet despite its simplicity, extensive use, and relationship to pH, it remains a subject of active research for synthetic organic chemists. Since 2013, a great number of new methods have emerged that utilize transition-metal compounds as catalysts for acceptorless dehydrogenation of alcohols to carboxylates. The interest in this reaction is explained by its atom economy, which is in accord with the principles of sustainability and green chemistry. Therefore, the methods for the direct synthesis of carboxylic acids from alcohols is ripe for a modern survey, which we provide in this review.

1 Introduction

2 Thermodynamics of Primary Alcohol Oxidation

3 Oxometalate Oxidation

4 Transfer Dehydrogenation

5 Acceptorless Dehydrogenation

6 Electrochemical Methods

7 Outlook

Sequential Connection of Mutually Exclusive Catalytic Reactions by a Method Controlling the Presence of an MOF Catalyst: One-Pot Oxidation of Alcohols to Carboxylic Acids

A functionalized metal-organic framework (MOF) catalyst applied to the sequential one-pot oxidation of alcohols to carboxylic acids controls the presence of a heterogeneous catalyst. The conversion of alcohols to aldehydes was acquired through aerobic oxidation using a well-known amino-oxy radical-functionalized MOF. In the same flask, a simple filtration of the radical MOF with mild heating of the solution completely altered the reaction media, providing radical scavenger-free conditions suitable for the autoxidation of the aldehydes formed in the first step to carboxylic acids. The mutually exclusive radical-catalyzed aerobic oxidation (the first step with MOF) and radical-inhibited autoxidation (the second step without MOF) are sequentially achieved in a one-pot manner. Overall, we demonstrate a powerful and efficient method for the sequential oxidation of alcohols to carboxylic acids by employing a readily functionalizable heterogeneous MOF. In addition, our MOF in-and-out method can be utilized in an environmentally friendly way for the oxidation of alcohols to carboxylic acids of industrial and economic value with broad functional group tolerance, including 2,5-furandicarboxylic acid and 1,4-benzenedicarboxylic acid, with good yield and reusability. Furthermore, MOF-TEMPO, as an antioxidative stabilizer, prevents the undesired oxidation of aldehydes, and the perfect "recoverability" of such a reactive MOF requires a re-evaluation of the advantages of MOFs from heterogeneity in catalytic and related applications.

Proton-responsive naphthyridinone-based RuII complexes and their reactivity with water and alcohols

We report the synthesis and reactivity of RuII complexes with a new naphthyridinone-substituted phosphine ligand, 7-(diisopropylphosphinomethyl)-1,8-naphthyridin-2(1H)-one (L-H), which contains two reactive sites that can potentially be deprotonated by a strong base: an NH proton of naphthyridinone and a methylene arm attached to the phosphine. In the absence of a base, the stable bis-ligated complex Ru(L-H)2Cl2 (1) containing two NH groups in the secondary coordination sphere is formed. Upon further reaction with a base, a doubly deprotonated, dimeric complex is obtained, [Ru2(L*-H)2(L)2] (2), in which two of the four ligands undergo deprotonation at the NH (L), while the other two ligands are deprotonated at the methylene groups (L*-H) as confirmed by an X-ray diffraction study; intramolecular hydrogen bonding is present between the NH group of one ligand and an O-atom of another ligand in the dimeric structure, which stabilizes the observed geometry of the complex. Complex 2 reacts with protic solvents such as water or methanol generating aqua Ru(L)2(OH2)2 (3) or methanol complexes Ru(L)2(MeOH)2 (4), respectively, both exhibiting intramolecular H-bonded patterns with surrounding ligands at least in the solid state. These complexes react with benzyl alcohols to give aldehydes via base-free acceptorless dehydrogenation.

Synthesis of Dicarboxylic Acids from Aqueous Solutions of Diols with Hydrogen Evolution Catalyzed by an Iridium Complex

A catalytic system for the synthesis of dicarboxylic acids from aqueous solutions of diols accompanied by the evolution of hydrogen was developed. An iridium complex bearing a functional bipyridonate ligand with N,N-dimethylamino substituents exhibited a high catalytic performance for this type of dehydrogenative reaction. For example, adipic acid was synthesized from an aqueous solution of 1,6-hexanediol in 97 % yield accompanied by the evolution of four equivalents of hydrogen by the present catalytic system. It should be noted that the simultaneous production of industrially important dicarboxylic acids and hydrogen, which is useful as an energy carrier, was achieved. In addition, the selective dehydrogenative oxidation of vicinal diols to give α-hydroxycarboxylic acids was also accomplished.

NaCl as Catalyst and Water as Solvent: Highly E-Selective Olefination of Methyl Substituted N-Heteroarenes with Benzyl Amines and Alcohols

Oxidative coupling of benzylamines and alcohols with methyl substituted N-heteroarenes such as quinolines and quinoxalines has been achieved using chloride, a sea abundant anion as the catalyst for practical synthesis of a wide range of E-disubstituted olefins in aqueous medium. Detailed mechanistic studies and control experiments were carried out to deduce the reaction mechanism which indicated that in situ formed ClO₂^- is the active form of the catalyst. We have successfully carried out a 1 g scale reaction using this methodology, and five pharmaceutically relevant conjugated olefins were also synthesized by this method in moderate to good yields.

A cyclometalated Ir(III)-NHC complex as a recyclable catalyst for acceptorless dehydrogenation of alcohols to carboxylic acids

In this work, we have synthesized two new [C, C] cyclometalated Ir(iii)-NHC complexes, [IrCp*(C∧C:NHC)Br](1a,b), [Cp* = pentamethylcyclopentadienyl; NHC = (2-flurobenzyl)-1-(4-methoxyphenyl)-1H-imidazoline-2-ylidene (a); (2-flurobenzyl)-1-(4-formylphenyl)-1H-imidazoline-2-ylidene (b)] via intramolecular C-H bond activation. The molecular structure of complex 1a was determined by X-ray single crystal analysis. The catalytic potentials of the complexes were explored for acceptorless dehydrogenation of alcohols to carboxylic acids with concomitant hydrogen gas evolution. Under similar experimental conditions, complex 1a was found to be slightly more efficient than complex 1b. Using 0.1 mol% of complex 1a, good-to-excellent yields of carboxylic acids/carboxylates have been obtained for a wide range of alcohols, both aliphatic and aromatic, including those involving heterocycles, in a short reaction time with a low loading of catalyst. Remarkably, our method can produce benzoic acid from benzyl alcohol on a gram scale with a catalyst-to-substrate ratio as low as 1 : 5000 and exhibit a TON of 4550. Furthermore, the catalyst could be recycled at least three times without losing its activity. A mechanism has been proposed based on controlled experiments and in situ NMR study.

Highly Efficient N-Heterocyclic Carbene/Ruthenium Catalytic Systems for the Acceptorless Dehydrogenation of Alcohols to Carboxylic Acids: Effects of Ancillary and Additional Ligands

The transition-metal-catalyzed alcohol dehydrogenation to carboxylic acids has been identified as an atom-economical and attractive process. Among various catalytic systems, Ru-based systems have been the most accessed and investigated ones. With our growing interest in the discovery of new Ru catalysts comprising N-heterocyclic carbene (NHC) ligands for the dehydrogenative reactions of alcohols, we designed and prepared five NHC/Ru complexes ([Ru]-1–[Ru]-5) bearing different ancillary NHC ligands. Moreover, the effects of ancillary and additional ligands on the alcohol dehydrogenation with KOH were thoroughly explored, followed by the screening of other parameters. Accordingly, a highly active catalytic system, which is composed of [Ru]-5 combined with an additional NHC precursor L5, was discovered, affording a variety of acid products in a highly efficient manner. Gratifyingly, an extremely low Ru loading (125 ppm) and the maximum TOF value until now (4800) were obtained.

Synthesis and Structures of Ruthenium Carbonyl Complexes Bearing Pyridine-Alkoxide Ligands and Their Catalytic Activity in Alcohol Oxidation

Reaction of Ru₃(CO)₁₂ with two equiv of 6-bromopyridine alcohols 6-bromopyCHROH [(R = C₆H₅ (L1); R = 4-CH₃C₆H₄ (L2); R = 4-OMeC₆H₄ (L3); R = 4-ClC₆H₄ (L4); (R = 4-CF₃C₆H₄ (L5); R = 2-OMeC₆H₄ (L6); R = 2-CF₃C₆H₄ (L7)] and 6-bromopyC(Me)₂OH (L8) in refluxing xylene afforded novel trinuclear ruthenium complexes [6-bromopyCHRO]₂Ru₃(CO)₈ (1a-1g) and [6-bromopyC(Me)₂O]₂Ru₃(CO)₈ (1h). These complexes were characterized by FT-IR and NMR spectroscopy as well as elemental analysis. The structures of all the complexes were further confirmed by X-ray crystallographic analysis. In the presence of tert-butyl hydroperoxide (TBHP) as the source of oxidant, complexes 1a-1h displayed high catalytic activities for oxidation of primary and secondary alcohols and most of oxidation reactions could be completed within 1 h at room temperature.

Copper-Catalyzed Oxidative Multicomponent Annulation Reaction for Direct Synthesis of Quinazolinones via an Imine-Protection Strategy

Via an imine-protection strategy, we herein present an unprecedented copper-catalyzed oxidative multicomponent annulation reaction for direct synthesis of quinazolinones. The construction of various products is achieved via formation of three C-N and one C-C bonds in conjunction with the benzylic functionalization. The merits of easily available feedstocks, naturally abundant catalyst, good functional group and substrate compatibility, and release of H₂O as the byproduct make the developed chemistry a practical way to access quinazolinones.