TiO2-Catalyzed n-Valeraldehyde Self-Condensation Reaction Mechanism and Kinetics

Multicomponent Reductive Coupling for Selective Access to Functional γ-Lactams by a Single-Atom Cobalt Catalyst

Despite their significant importance to numerous fields, the difficulties in direct and diverse synthesis of α-hydroxy-γ-lactams pose substantial obstacles to their practical applications. Here, we designed a nitrogen and TiO2 co-doped graphitic carbon-supported material with atomically dispersed cobalt sites (CoSA-N/NC-TiO2), which was successfully applied as a multifunctional catalyst to establish a general method for direct construction of α-hydroxy-γ-lactams from cheap and abundant nitro(hetero)arenes, aldehydes, and H2O with alkynoates. The striking features of operational simplicity, broad substrate and functionality compatibility (>100 examples), high step and atom efficiency, good selectivity, and exceptional catalyst reusability highlight the practicality of this new catalytic transformation. Mechanistic studies reveal that the active CoN4 species and the dopants exhibit a synergistic effect on the formation of key acid-masked nitrones; their subsequent nucleophilic addition to the alkynoates followed by successive reduction, alkenyl hydration, and intramolecular ester ammonolysis delivers the desired products. In this work, the concept of reduction interruption leading to new reaction route will open a door to further develop useful transformations by rational catalyst design.

Enhancement of Organic Oxygen Atoms on Metal Cobalt for Sulfur Adsorption and Catalytic Polysulfide Conversion

Metals and their compounds effectively suppress the polysulfide shuttle effect on the cathodes of a lithium-sulfur (Li-S) battery by chemisorbing polysulfides and catalyzing their conversion. However, S fixation on currently available cathode materials is below the requirements of large-scale practical application of this battery type. In this study, perylenequinone was utilized to improve polysulfide chemisorption and conversion on cobalt (Co)-containing Li-S battery cathodes. According to IGMH analysis, the binding energies of DPD and carbon materials as well as polysulfide adsorption were significantly enhanced in the presence of Co. According to in situ Fourier transform infrared spectroscopy, the hydroxyl and carbonyl groups in perylenequinone are able to form O-Li bonds with Li₂S_n, facilitating chemisorption and catalytic conversion of polysulfides on metallic Co. The newly prepared cathode material demonstrated superior rate and cycling performances in the Li-S battery. It exhibited an initial discharge capacity of 780 mAh g^-1 at 1 C and a minimum capacity decay rate of only 0.041% over 800 cycles. Even with a high S loading, the cathode material maintained an impressive capacity retention rate of 73% after 120 cycles at 0.2 C.

Solvent-Free Aldol Condensation of Cyclopentanone with Natural Clay-Based Catalysts: Origin of Activity & Selectivity

The conversion of biomass resources into high-value fuels and chemicals using thermochemical methods has become an attractive method of energy utilization. In this study, natural minerals were used as raw materials; the acidic sites were introduced by ball-milling modification, and the aldol condensation reaction of the biomass-based cyclopentanone molecule was carried out under solvent-free conditions. It was found that the SO3H-APG catalyst—with strong medium-based sites when the -SO3H loading was 4 mmol/g—exhibited excellent acid–base co-activation effects and a significant catalytic effect in the cyclopentanone condensation reaction. The optimization of the reaction conditions showed that the conversion of cyclopentanone reached 85.53% at the reaction temperature of 150 °C and reaction time of 4 h. The selectivity of the dimer and trimer was 69.04% and 28.41%, respectively. The investigation of the cyclopentanone condensation mechanism and kinetic analysis showed that the acid–base presence of an acid–base bifunctional catalyst was important to facilitate the condensation reaction. This research route is in line with the concept of sustainable green production and also provides a promising pathway for catalyst design and the synthesis of long-chain hydrocarbons.

Highly Efficient Electrocatalytic Upgrade of n-Valeraldehyde to Octane over Au SACs-NiMn2 O4 Spinel Synergetic Composites

In this work, electrocatalytic upgrade of n-valeraldehyde to octane with higher activity and selectivity is achieved over Au single-atom catalysts (SACs)-NiMn₂ O₄ spinel synergetic composites. Experiments combined with density functional theory calculation collaboratively demonstrate that Au single-atoms occupy surface Ni²⁺ vacancies of NiMn₂ O₄ , which play a dominant role in n-valeraldehyde selective oxidation. A detailed investigation reveals that the initial n-valeraldehyde molecule preferentially adsorbs on the Mn tetrahedral site of NiMn₂ O₄ spinel synergetic structures, and the subsequent n-valeraldehyde molecule easily adsorbs on the Ni site. Specifically, Au single-atom surficial derivation over spinel lowers the adsorption energy (E_ads ) of the initial n-valeraldehyde molecule, which will facilitate its adsorption on the Mn site of Au SACs-NiMn₂ O₄ . Furthermore, the single-atom Au surficial derivation not only alters the electronic structure of Au SACs-NiMn₂ O₄ but also lower the E_ads of subsequent n-valeraldehyde molecule. Hence, the subsequent n-valeraldehyde molecules prefer adsorption on Au sites rather than Ni sites, and the process of two alkyl radicals originating from Mn-C₄ H₉ and Au-C₄ H₉ dimerization into an octane is accordingly accelerated. This work will provide an avenue for the rational design of SACs and supply a vital mechanism for understanding the electrocatalytic upgrade of n-valeraldehyde to octane.

Out of Thin Air? Catalytic Oxidation of Trace Aqueous Aldehydes with Ambient Dissolved Oxygen

Water reuse is expanding due to increased water scarcity. Water reuse facilities treat wastewater effluent to a very high purity level, typically resulting in a product water that is essentially deionized water, often containing less than 100 μg/L organic carbon. However, recent research has found that low-molecular-weight aldehydes, which are toxic electrophiles, comprise a significant fraction of the final organic carbon pool in recycled wastewater in certain treatment configurations. In this manuscript, we demonstrate oxidation of trace aqueous aldehydes to their corresponding acids using a heterogeneous catalyst (5% Pt on C), with ambient dissolved oxygen serving as the terminal electron acceptor. Mass balances are essentially quantitative across a range of aldehydes, and pseudo-first-order reaction kinetics are observed in batch reactors, with k_obs varying from 0.6 h^-1 for acetaldehyde to 4.6 h^-1 for hexanal, while they are low for unsaturated aldehydes. Through kinetic and isotopic labeling experiments, we demonstrate that while oxygen is essential for the reaction to proceed, it is not involved in the rate-limiting step, and the reaction appears to proceed primarily through a base-promoted β-hydride elimination mechanism from the hydrated gem-diol form of the corresponding aldehyde. This is the first report we are aware of that demonstrates useful abiotic oxidation of a trace organic contaminant using dissolved oxygen.

Influence of support texture and reaction conditions on the accumulation and activity in the gas-phase aldol condensation of n-pentanal on porous silica

Aldol condensation of n-pentanal can lead to pore blocking and hence transport limitations in supported liquid phase (SLP) catalysts. By careful texture optimization this effect can be minimized.

Highly efficient synthesis of novel bio-based pentamethylene dicarbamate via carbonylation of pentanediamine with ethyl carbamate over well-defined titanium oxide catalysts

Highly efficient synthesis of bio-based pentamethylene dicarbamate from pentanediamine and ethyl carbamate was successfully achieved over the well-defined TiO2 catalysts, which provides a green and sustainable way for the production of bio-based isocyanates or polyurethane.

Elucidation of Active Sites in Aldol Condensation of Acetone over Single-Facet Dominant Anatase TiO2 (101) and (001) Catalysts

Aldol condensations of carbonyl compounds for C-C bond formation are a very important class of reactions in organic synthesis and upgrading of biomass-derived feedstocks. However, the atomic level understanding of reaction mechanisms and structure-activity correlation on widely used transition metal oxide catalysts are limited due to the high degree of structural heterogeneity of catalysts such as commercial TiO₂ powders. Here, we provide a deep understanding of the reaction mechanisms, kinetics, and structure-function relationships for vapor phase acetone aldol condensation through the controlled synthesis of two catalysts with high surface areas and clean, dominant facets, coupled with detailed characterization and kinetic studies that are further assisted by density functional theory (DFT) calculations. Temperature-dependent diffuse reflectance infrared Fourier transform spectroscopy showed the existence of abundant acetone bonded to surface hydroxyl groups (acetone-O_sH) and acetone bonded to Lewis acid sites (acetone-Ti_5c) on the surface of both {101} and {001} facet dominant TiO₂. Intermolecular C-C coupling of theenolate intermediate from acetone-Ti_5c and a vicinal acetone-O_sH is a kinetically relevant step, which is consistent with kinetic and isotopic studies as well as DFT calculations. The {001} facet showed a lower apparent activation energy (or higher activity) than the {101} facet. This is likely caused by the weaker Lewis acid and Brønsted base strengths of the {001} facet which favors the reprotonation-desorption of the coupled intermediate, making the C-C coupling step more exothermic on the {001} facet and resulting in an earlier transition state with a lower activation barrier. It is also possible that the {001} facet has a smoother surface configuration and less steric hindrance during intermolecular C-C bond formation than the {101} facet.

Rational Method of Monitoring Molecular Transformations on Metal-Oxide Nanowire Surfaces

Metal-oxide nanowires have demonstrated excellent capability in the electrical detection of various molecules based on their material robustness in liquid and air environments. Although the surface structure of the nanowires essentially determines their interaction with adsorbed molecules, understanding the correlation between an oxide nanowire surface and an adsorbed molecule is still a major challenge. Herein, we propose a rational methodology to obtain this information for low-density molecules adsorbed on metal oxide nanowire surfaces by employing infrared p-polarized multiple-angle incidence resolution spectroscopy and temperature-programmed desorption/gas chromatography-mass spectrometry. As a model system, we studied the surface chemical transformation of an aldehyde (nonanal, a cancer biomarker in breath) on single-crystalline ZnO nanowires. We found that a slight surface reconstruction, induced by the thermal pretreatment, determines the surface chemical reactivity of nonanal. The present results show that the observed surface reaction trend can be interpreted in terms of the density of Zn ions exposed on the nanowire surface and of their corresponding spatial arrangement on the surface, which promotes the reaction between neighboring adsorbed molecules. The proposed methodology will support a better understanding of complex molecular transformations on various nanostructured metal-oxide surfaces.