Supramolecular Photocatalysts for the Reduction of CO2

S-scheme heterojunction of crystalline carbon nitride nanosheets and ultrafine WO3 nanoparticles for photocatalytic CO2 reduction

Highly crystalline carbon nitride polymers have shown great opportunities in overall water photosplitting; however, their mission in light-driven CO2 conversion remains to be explored. In this work, crystalline carbon nitride (CCN) nanosheets of poly triazine imide (PTI) embedded with melon domains are fabricated by KCl/LiCl-mediated polycondensation of dicyandiamide, the surface of which is subsequently deposited with ultrafine WO3 nanoparticles to construct the CCN/WO3 heterostructure with a S-scheme interface. Systematic characterizations have been conducted to reveal the compositions and structures of the S-scheme CCN/WO3 hybrid, featuring strengthened optical capture, enhanced CO2 adsorption and activation, attractive textural properties, as well as spatial separation and directed movement of light-triggered charge carriers. Under mild conditions, the CCN/WO3 catalyst with optimized composition displays a high photocatalytic activity for reducing CO2 to CO in a rate of 23.0 µmol/hr (i.e., 2300 µmol/(hr·g)), which is about 7-fold that of pristine CCN, along with a high CO selectivity of 90.6% against H2 formation. Moreover, it also manifests high stability and fine reusability for the CO2 conversion reaction. The CO2 adsorption and conversion processes on the catalyst are monitored by in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), identifying the crucial intermediates of CO2*-, COOH* and CO*, which integrated with the results of performance evaluation proposes the possible CO2 reduction mechanism.

Earth-abundant Zn-dipyrrin chromophores for efficient CO2 photoreduction

The development of strong sensitizing and Earth-abundant antenna molecules is highly desirable for CO2 reduction through artificial photosynthesis. Herein, a library of Zn-dipyrrin complexes (Z-1-Z-6) are rationally designed via precisely controlling their molecular configuration to optimize strong sensitizing Earth-abundant photosensitizers. Upon visible-light excitation, their special geometry enables intramolecular charge transfer to induce a charge-transfer state, which was first demonstrated to accept electrons from electron donors. The resulting long-lived reduced photosensitizer was confirmed to trigger consecutive intermolecular electron transfers for boosting CO2-to-CO conversion. Remarkably, the Earth-abundant catalytic system with Z-6 and Fe-catalyst exhibits outstanding performance with a turnover number of >20 000 and 29.7% quantum yield, representing excellent catalytic performance among the molecular catalytic systems and highly superior to that of noble-metal photosensitizer Ir(ppy)2(bpy)+ under similar conditions. Experimental and theoretical investigations comprehensively unveil the structure-activity relationship, opening up a new horizon for the development of Earth-abundant strong sensitizing chromophores for boosting artificial photosynthesis.

Solar CO2 reduction using a molecular Re(I) catalyst grafted on SiO2via amide and alkyl amine linkages

Heterogenized molecular catalysts have shown interesting activities in different chemical transformations. In our previous studies, a molecular catalyst, Re(bpy)(CO)3Cl where bpy is 2,2'-bipyridine, was covalently attached to silica surfaces via an amide linkage for use in photocatalytic CO2 reduction. Derivatizing the bpy ligand with electron-withdrawing amide groups led to detrimental effects on the catalytic activity of Re(bpy)(CO)3Cl. In this study, an alkyl amine linkage is utilized to attach Re(bpy)(CO)3Cl onto SiO2 in order to eliminate the detrimental effects of the amide linkage by breaking the conjugation between the bpy ligand and the amide group. However, the heterogenized Re(I) catalyst containing the alkyl amine linkage demonstrates even lower activity than the one containing the amide linkage in photocatalytic CO2 reduction. Infrared studies suggest that the presence of the basic amine group led to the formation of a photocatalytically inactive Re(I)-OH species on SiO2. Furthermore, the amine group likely contributes to the stabilization of a surface Re(I)-carboxylato species formed upon light irradiation, resulting in the low activity of the heterogenized Re(I) catalyst containing the alkyl amine linkage.

Influence of a neighbouring Cu centre on electro- and photocatalytic CO2 reduction by Fe-Mabiq

Electrocatalytic and photocatalytic CO2 reduction by a heterobimetallic Cu/Fe-Mabiq complex were examined and compared to the monometallic [Fe(Mabiq)]+. The neighbouring Cu-Xantphos unit leads to marked changes in the electrocatalytic mechanism and enhanced photocatalytic performance.

Mechanism of photocatalytic CO2 reduction to HCO2H by a robust multifunctional iridium complex

The tetradentate PNNP-type IrIII complex Mes-IrPCY2 ([Cl-IrIII-H]+) is reported to be an efficient catalyst for the reduction of CO2 to formate with excellent selectivity under visible light irradiation. Density functional calculations have been carried out to elucidate the mechanism and the origin of selectivity in the present work. Calculations suggest that the double-reduced complex 1-H (1[IrI-H]0) demonstrates higher activity than the single-reduced complex 2-H (2[IrIII(L˙-)-H]+), possibly owing to the higher hydride donor ability of the former compared to the latter; thus 1-H functions as the active species in the overall CO2 reduction reaction. In the HCOO- formation pathway, the hydride of 1-H performs a nucleophilic attack on CO2via an outer-sphere fashion to generate species 1-OCHO (1[IrI-OCHO]0), which then releases HCOO- to produce an IrI intermediate. A subsequent protonation and chloride coordination of the Ir center leads to the regeneration of catalyst 1[Cl-IrIII-H]+. For the CO production, a nucleophilic attack on CO2 takes place by the Ir atom of 1-Hvia an inner-sphere manner to afford complex O2C-3-H (1[O2C-IrIII-H]0), followed by a two-proton-one-electron reduction to furnish the OC-2-H complex (2[OC-IrIII(L˙-)-H]+) after liberating a H2O. Ultimately, CO is released to form 2-H. The stronger nucleophilicity as well as smaller steric hindrance of the hydride than the Ir atom of the active species 1-H (1[IrI-H]0) is found to account for the favoring of formate formation over CO formation. Meanwhile, the CO2 reduction reaction is calculated to be preferred over the hydrogen evolution reaction, and this is consistent with the experimental product distributions.

Host-Guest Photosensitizer of a Cationic BODIPY Derivative and Cucurbit[7]uril for High-Efficiency Visible Light-Induced Photooxidation Reactions

In recent years, there has been a notable surge of interest in the fields of organic and pharmaceutical research about photocatalysts (PCs) and photosensitizers (PSs). In this study, a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) molecule adorned with quaternary ammonium (TMB) functionality was meticulously designed and synthesized. This compound has remarkable characteristics such as exceptional water solubility, great optical qualities, and commendable photostability. It can form a 1:1 complex (TMB-CB[7]) with cucurbit[7]uril (CB[7]) through host-guest interactions in the aqueous solution and shows obvious fluorescence enhancement. The reactive oxygen species (ROS) including superoxide anion radical (O2·-) and singlet oxygen (1O2) generation ability of TMB-CB[7] were promoted compared with that of TMB in the aqueous solution. More interestingly, the ROS generated from TMB-CB[7] can be used as PCs for aerobic cross dehydrogenation coupling reactions and photooxidation reactions in water with high yields of 89 and 95%, respectively. Therefore, the utilization of a host-guest PS presents a novel and environmentally friendly approach for conducting photocatalyzed organic processes under ambient conditions using visible light.

Selective Metal-Free CO2 Photoreduction in Water Using Porous Nanostructures with Internal Molecular Free Volume

The conversion of CO2 to a sole carbonaceous product using photocatalysis is a sustainable solution for alleviating the increasing levels of CO2 emissions and reducing our dependence on nonrenewable resources such as fossil fuels. However, developing a photoactive, metal-free catalyst that is highly selective and efficient in the CO2 reduction reaction (CO2RR) without the need for sacrificial agents, cocatalysts, and photosensitizers is challenging. Furthermore, due to the poor solubility of CO2 in water and the kinetically and thermodynamically favored hydrogen evolution reaction (HER), designing a highly selective photocatalyst is challenging. Here, we propose a molecular engineering approach to design a photoactive polymer with high CO2 permeability and low water diffusivity, promoting the mass transfer of CO2 while suppressing HER. We have incorporated a contorted triptycene scaffold with "internal molecular free volume (IMFV)" to enhance gas permeability to the active site by creating molecular channels through the inefficient packing of polymer chains. Additionally, we introduced a pyrene moiety to promote visible-light harvesting capability and charge separation. By leveraging these qualities, the polymer exhibited a high CO generation rate of 77.8 μmol g-1 h-1, with a high selectivity of ∼98% and good recyclability. The importance of IMFV was highlighted by replacing the contorted triptycene unit with a planar scaffold, which led to a selectivity reversal favoring HER over CO2RR in water. In situ electron paramagnetic resonance (EPR), time-resolved photoluminescence spectroscopy (TRPL), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) techniques, further supported by theoretical calculations, were employed to enlighten the mechanistic insight for metal-free CO2 reduction to exclusively CO in water.

A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Trinuclear Re(I)-Coordinated Organic Cage as the Supramolecular Photocatalyst for Visible-Light-Driven CO2 Reduction

Photocatalytic reduction of excess CO₂ in the atmosphere to value-added chemicals by visible light can be an effective solution to fuel shortage and global warming. Considering these issues, we designed and successfully synthesized a trinuclear Re(I)-coordinated organic cage (Re-C₄^R) as the supramolecular photocatalyst. Photophysical, electrochemical properties, and photocatalytic performance comparison of Re-C₄^R and its mononuclear analogue Re-bpy are discussed in detail. Notably, the covalent linkage of three Re(I) subunits in Re-C₄^R leads to TON_CO = 691 (per Re(I) site in 4 h) more than three times as much as TON_CO = 208 of Re-bpy. Compared to Re-bpy, higher current enhancement in the control CV experiments under CO₂ was observed for Re-C₄^R. CO₂ adsorption process can be promoted because of the cryptand structure and multiple amine groups of Re-C₄^R. Moreover, decay lifetimes of Re-C₄^R are shorter than those of Re-bpy in the ultrafast transient absorption (TA) and photoluminescence (PL) decay spectra, indicating that the trinuclear cryptate structure of Re-C₄^R could facilitate electron transfer efficiency during CO₂ reduction.

Photocatalyzed CO2 reduction to CO by supramolecular photocatalysts made of Ru(II) photosensitizers and Re(I) catalytic subunits containing preformed CO2TEOA adducts

Two new supramolecular photocatalysts containing Ru(II) polypyridine units as light-harvesting photosensitizers and Re(I) polypyridine subunits as catalytic centers have been prepared. The new species, RuRe2A and Ru2ReA, contain catalytic Re(I) subunits coordinated by the preformed CO₂TEOA adduct (known to be the effective catalytic subunits; TEOA is triethanolamine) and exhibit quite efficient and selective photoreduction of CO₂ to CO, with outstanding TONs of 2368 and 2695 and a selectivity of 99.9% and 98.9%, respectively. Such photocatalytic properties are significantly improved with respect to those of previously studied RuRe2 and Ru2Re parent compounds, containing chloride ligands instead of the CO₂TEOA adduct. Comparison between photocatalytic performance of the new species and their parent compounds allows to investigate the effect of the CO₂TEOA insertion process as well as the eventual effect of the presence of chloride ions in solution on the photocatalytic processes. The improved photocatalytic properties of RuRe2A and Ru2ReA compared with their parent species are attributed to a combined effect of different distribution of the one-electron reduced form of the supramolecular photocatalysts on the Ru-subunit(s) (leading to decreased CO formation due to a poisoning ligand loss process) and on the Re-subunit(s) and to the presence of chloride ions in solution for RuRe2 and Ru2Re, which could interfere with the CO₂TEOA adduct formation, a needed requisite for CO forming catalysis. These results strongly indicate the utility of preparing supramolecular photocatalysts containing preformed adducts.

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Accumulative Charge Separation in a Modular Quaterpyridine Bridging Ligand Platform and Multielectron Transfer Photocatalysis of π-Linked Dinuclear Ir(III)-Re(I) Complex for CO2 Reduction

Four sterically distorted quaterpyridyl (qpy) ligand-bridged Ir(III)-Re(I) heterometallic complexes (Ir-qpy_mm-Re, Ir-qpy_mp-Re, Ir-qpy_pm-Re, and Ir-qpy_pp-Re), in which the position of the coupling pyridine unit of the two 2,2'-bipyridine ligands was varied (meta (m)- or para (p)-position), pypy_x-py_xpy (x = m and m, qpy_mm; x = m and p, qpy_mp; x = p and m, qpy_pm; x = p and p, qpy_pp), were prepared, along with the fully π-conjugated Ir(III)-[π linker]-Re(I) complexes (π linker = 2,2'-bipyrimidine (bpm), Ir-bpm-Re; π linker = 2,5-di(pyridin-2-yl)pyrazine (dpp), Ir-dpp-Re) to elucidate the electron mediating and accumulative charge separation properties of the bridging π-linker in a bimetallic system (photosensitizer-π linker-catalytic center). From the photophysical and electrochemical studies, it was found that the quaterpyridyl (qpy) bridging ligand (BL), in which the two planar Ir/Re metalated bipyridine (bpy) ligands were connected but slightly canted relative to each other, linking the heteroleptic Ir(III) photosensitizer, [(^piqC^N)₂Ir^III(bpy)]⁺, and catalytic Re(I) complex, (bpy)Re^I(CO)₃Cl, minimized the energy lowering of the qpy BL, which hampers the forward photoinduced electron transfer (PET) process from [(^piqC^N)₂Ir^III(N^N)]⁺ to (N^N)Re^I(CO)₃Cl (E_red1 = -(0.85-0.93) V and E_red2 = -(1.15-1.30) V vs SCE). This result contrasts with the fully π-delocalized bimetallic systems (Ir-bpm-Re and Ir-dpp-Re) that show a significant energy reduction due to the considerable π-extension and deshielding effect caused by the neighboring Lewis acidic metals (Ir and Re) on the electrochemical scale (E_red1 = -0.37 V and E_red2 = -1.02 and -0.99 V vs SCE). Based on a series of anion absorption studies and spectroelectrochemical (SEC) analyses, all Ir(III)-BL-Re(I) bimetallic complexes were found to exist as dianionic form (Ir(III)-[BL]^2--Re(I)) after a fast reductive-quenching process in the presence of excess electron donor. In the photolysis experiment, the four Ir-qpy-Re complexes displayed the reasonable photochemical CO₂-to-CO conversion activities (TON of 366-588 for 19 h) owing to the moderated electronic coupling between two functional Ir(III) and Re(I) centers through the slightly distorted qpy ligand, whereas Ir-bpm-Re and Ir-dpp-Re displayed negligible performances as a result of the strong electronic coupling via π-conjugation between the two functional components resulting in the energetic constraints for PET and an unwanted side reactions competing with the forward processes. These results confirm that the qpy unit can be utilized as an efficient BL platform in π-linked bimetallic systems.

Surface-Specific Modification of Graphitic Carbon Nitride by Plasma for Enhanced Durability and Selectivity of Photocatalytic CO2 Reduction with a Supramolecular Photocatalyst

Photocatalytic CO₂ reduction is in high demand for sustainable energy management. Hybrid photocatalysts combining semiconductors with supramolecular photocatalysts represent a powerful strategy for constructing visible-light-driven CO₂ reduction systems with strong oxidation power. Here, we demonstrate the novel effects of plasma surface modification of graphitic carbon nitride (C₃N₄), which is an organic semiconductor, to achieve better affinity and electron transfer at the interface of a hybrid photocatalyst consisting of C₃N₄ and a Ru(II)-Ru(II) binuclear complex (RuRu'). This plasma treatment enabled the "surface-specific" introduction of oxygen functional groups via the formation of a carbon layer, which worked as active sites for adsorbing metal-complex molecules with methyl phosphonic-acid anchoring groups onto the plasma-modified surface of C₃N₄. Upon photocatalytic CO₂ reduction with the hybrid under visible-light irradiation, the plasma-surface-modified C₃N₄ with RuRu' enhanced the durability of HCOOH production by three times compared to that achieved when using a nonmodified system. The high selectivity of HCOOH production against byproduct evolution (H₂ and CO) was improved, and the turnover number of HCOOH production based on the RuRu' used reached 50 000, which is the highest among the metal-complex/semiconductor hybrid systems reported thus far. The improved activity is mainly attributed to the promotion of electron transfer from C₃N₄ to RuRu' under light irradiation via the accumulation of electrons trapped in deep defect sites on the plasma-modified surface of C₃N₄.

Dynamics of Photoinduced Intramolecular and Intermolecular Electron Transfers in Ligand-Conjugated Ir(III)-Re(I) Photocatalysts

We report the electron transfer (ET) dynamics in a series of Ir(III)-Re(I) photocatalysts where two bipyridyl ligands of Ir and Re moieties are conjugated at the meta (m)- or para (p)-position of each side. Femtosecond transient absorption (TA) measurements identify the intramolecular ET (IET) dynamics from the Ir to Re moiety, followed by the formation of one-electron-reduced species (OERS) via the intermolecular ET with a sacrificial electron donor (SED). The IET rate depends on the bridging ligand (BL) structures (∼25 ps for BL_mm/mp vs ∼68 ps for BL_pm/pp), while the OERS formation happens on an even slower time scale (∼1.4 ns). Connecting the Re moiety at the meta-position of the bipyridyl of the Ir moiety can restrict the rotation around a covalent bond between two bipyridyl ligands by steric hindrances and facilitate the IET process. This highlights the importance of BL structures on the ET dynamics in photocatalysts.

Learning from Nature's Example: Repair Strategies in Light-Driven Catalysis

The continuous repair of subunits of the photosynthetic apparatus is a key factor determining the overall efficiency of biological photosynthesis. Recent concepts for repairing artificial photocatalysts and catalytically active materials within the realm of solar fuel formation show great potential in reshaping the research directions within this field. This perspective describes the latest advances, concepts, and mechanisms in the field of catalyst repair and catalyst self-healing and provides an outlook on which additional steps need to be taken to bring artificial photosynthetic systems closer to real-life applications.

Advancements and Challenges in Reductive Conversion of Carbon Dioxide via Thermo-/Photocatalysis

Carbon dioxide (CO₂) is the major greenhouse gas and also an abundant and renewable carbon resource. Therefore, its chemical conversion and utilization are of great attraction for sustainable development. Especially, reductive conversion of CO₂ with energy input has become a current hotspot due to its ability to access fuels and various important chemicals. Nowadays, the controllable CO₂ hydrogenation to formic acid and alcohols using sustainable H₂ resources has been regarded as an appealing solution to hydrogen storage and CO₂ accumulation. In addition, photocatalytic CO₂ reduction to CO also provides a potential way to utilize this greenhouse gas efficiently. Besides direct CO₂ hydrogenation, CO₂ reductive functionalization integrates CO₂ reduction with subsequent C-X (X = N, S, C, O) bond formation and indirect transformation strategies, enlarging the diverse products derived from CO₂ and promoting CO₂ reductive conversion into a new stage. In this Perspective, the progress and challenges of CO₂ reductive conversion, including hydrogenation, reductive functionalization, photocatalytic reduction, and photocatalytic reductive functionalization are summarized and discussed along with the key issues and future trends/directions in this field. We hope this Perspective can evoke intense interest and inspire much innovation in the promise of CO₂ valorization.

Efficient Red-Light-Driven Hydrogen Evolution with an Anthraquinone Organic Dye

The direct utilization of the full solar spectrum to obtain renewable fuels remains a challenge because the conversion of the low-energy light (red and near-infrared) is difficult. Current light-driven systems show activity for hydrogen generation with the high-energy part of sunlight. Here we report the use of a simple anthraquinone organic dye in an artificial photosynthetic system that promotes efficient red-light-driven production of hydrogen. The system contains no noble metal and exhibits a turnover number greater than 0.78 million and a quantum yield of 30.6% at 630 nm. A mechanistic study revealed that the excited-state and redox properties of the chromophore are critical to achieving high activity and stability.

Insights into the different mechanistic stages of light-induced hydrogen evolution of a 5,5'-bisphenanthroline linked RuPt complex

Herein, the synthesis in conjunction with the structural, electrochemical, and photophysical characterization of a 5,5'-bisphenanthroline (phenphen) linked heterodinuclear RuPt complex (Ru(phenphen)Pt) and its light-driven hydrogen formation activity are reported. A single crystal X-ray diffraction (SC-XRD) analysis identified a perpendicular orientation of the two directly linked 1,10-phenanthroline moieties. The disruption of π-conjugation blocks intramolecular electron transfer as evidenced by a comparative time-resolved optical spectroscopy study of Ru(phenphen)Pt and the reference complexes Ru(phenphen) and Ru(phenphen)Ru. However, reductive quenching is observed in the presence of an external electron donor such as triethylamine. Irradiating Ru(phenphen)Pt with visible light (470 nm) leads to H₂ formation. We discuss a potential mechanism that mainly proceeds via Pt colloids and provide indications that initial hydrogen generation may also proceed via a molecular pathway. As previous reports on related heterodinuclear RuPt-based photocatalysts revealed purely molecular hydrogen evolution, the present work thus highlights the role of the bridging ligand in stabilizing the catalytic center and consequently determining the mechanism of light-induced hydrogen evolution in these systems.

Switching Excited State Distribution of Metal-Organic Framework for Dramatically Boosting Photocatalysis

Photosensitization associated with electron/energy transfer represents the central science of natural photosynthesis. Herein, we proposed a protocol to dramatically improve the sensitizing ability of metal-organic frameworks (MOFs) by switching their excited state distribution from ³ MLCT (metal-to-ligand charge transfer) to ³ IL (intraligand). The hierarchical organization of ³ IL MOFs and Co/Cu catalysts facilitates electron transfer for efficient photocatalytic H₂ evolution with a yield of 26 844.6 μmol g^-1 and CO₂ photoreduction with a record HCOOH yield of 4807.6 μmol g^-1 among all the MOF photocatalysts. Systematic investigations demonstrate that strong visible-light-absorption, long-lived excited state and ingenious multi-component synergy in the ³ IL MOFs can facilitate both interface and intra-framework electron transfer to boost photocatalysis. This work opens up an avenue to boost solar-energy conversion by engineering sensitizing centers at a molecular level.

Highly Robust Rhenium(I) Bipyridyl Complexes Containing Dipyrromethene-BF2 Chromophores for Visible Light-Driven CO2 Reduction

New rhenium bipyridyl complexes with dipyrromethene-BF₂ chromophores (A-ReBDP-CZ, A-ReBDP₂ , ReBDP-CZ, and ReBDP₂ ) were developed for highly efficient photocatalytic carbon dioxide (CO₂ ) reduction to carbon monoxide (CO). These catalysts consisted of two moderate electron-deficient groups (dipyrromethene-BF₂ , BDP) as the visible-light-harvesting antenna as well as both electron donor (N-phenylcarbazole, CZ) and acceptor (BDP) on Re bipyridyl framework. Among ReBDP-CZ and ReBDP₂ complexes, the ReBDP₂ incorporating two electron-deficient BDP chromophores had a longer-lived photoexcited state (182.4 μs) and a twofold enhanced molar absorption coefficient (ϵ=157000 m^-1  cm^-1 ) compared with ReBDP-CZ. Thus, ReBDP₂ achieved the superior photocatalytic reactivity and stability with a CO turnover number (TON_CO ) value as high as 1323 and quantum yield (Φ_CO ) up to 55 %, which was the most excellent photocatalysis efficiency among the single-active-site Re catalysts without additional photosensitizer. Furthermore, the acetylene-bridged linker was detrimental to the photoactivity and durability of the catalyst. In brief, two BDP-based Re bipyridyl systems with outstanding catalytic performance and significant visible-light-harvesting capabilities in the solar spectrum offer a promising strategy for solar-to-fuel conversion schemes.

Polymer Photoelectrodes for Solar Fuel Production: Progress and Challenges

Converting solar energy to fuels has attracted substantial interest over the past decades because it has the potential to sustainably meet the increasing global energy demand. However, achieving this potential requires significant technological advances. Polymer photoelectrodes are composed of earth-abundant elements, e.g. carbon, nitrogen, oxygen, hydrogen, which promise to be more economically sustainable than their inorganic counterparts. Furthermore, the electronic structure of polymer photoelectrodes can be more easily tuned to fit the solar spectrum than inorganic counterparts, promising a feasible practical application. As a fast-moving area, in particular, over the past ten years, we have witnessed an explosion of reports on polymer materials, including photoelectrodes, cocatalysts, device architectures, and fundamental understanding experimentally and theoretically, all of which have been detailed in this review. Furthermore, the prospects of this field are discussed to highlight the future development of polymer photoelectrodes.

Light-induced electron transfer/phase migration of a redox mediator for photocatalytic C-C coupling in a biphasic solution

Photocatalytic molecular conversions that lead to value-added chemicals are of considerable interest. To achieve highly efficient photocatalytic reactions, it is equally important as it is challenging to construct systems that enable effective charge separation. Here, we demonstrate that the rational construction of a biphasic solution system with a ferrocenium/ferrocene (Fc⁺/Fc) redox couple enables efficient photocatalysis by spatial charge separation using the liquid-liquid interface. In a single-phase system, exposure of a 1,2-dichloroethane (DCE) solution containing a Ru(II)- or Ir(III)-based photosensitizer, Fc, and benzyl bromide (Bn-Br) to visible-light irradiation failed to generate any product. However, the photolysis in a H₂O/DCE biphasic solution, where the compounds are initially distributed in the DCE phase, facilitated the reductive coupling of Bn-Br to dibenzyl (Bn₂) using Fc as an electron donor. The key result of this study is that Fc⁺, generated by photooxidation of Fc in the DCE phase, migrates to the aqueous phase due to the drastic change in its partition coefficient compared to that of Fc. This liquid-liquid phase migration of the mediator is essential for facilitating the reduction of Bn-Br in the DCE phase as it suppresses backward charge recombination. The co-existence of anions can further modify the driving force of phase migration of Fc⁺ depending on their hydrophilicity; the best photocatalytic activity was obtained with a turnover frequency of 79.5 h^-1 and a quantum efficiency of 0.2% for the formation of Bn₂ by adding NBu₄⁺Br^- to the biphasic solution. This study showcases a potential approach for rectifying electron transfer with suppressed charge recombination to achieve efficient photocatalysis.

Porphyrins and phthalocyanines as biomimetic tools for photocatalytic H2 production and CO2 reduction

The increasing energy demand and environmental issues caused by the over-exploitation of fossil fuels render the need for renewable, clean, and environmentally benign energy sources unquestionably urgent. The zero-emission energy carrier, H₂ is an ideal alternative to carbon-based fuels especially when it is generated photocatalytically from water. Additionally, the photocatalytic conversion of CO₂ into chemical fuels can reduce the CO₂ emissions and have a positive environmental and economic impact. Inspired by natural photosynthesis, plenty of artificial photocatalytic schemes based on porphyrinoids have been investigated. This review covers the recent advances in photocatalytic H₂ production and CO₂ reduction systems containing porphyrin or phthalocyanine derivatives. The unique properties of porphyrinoids enable their utilization both as chromophores and as catalysts. The homogeneous photocatalytic systems are initially described, presenting the various approaches for the improvement of photosensitizing activity and the enhancement of catalytic performance at the molecular level. On the other hand, for the development of the heterogeneous systems, numerous methods were employed such as self-assembled supramolecular porphyrinoid nanostructures, construction of organic frameworks, combination with 2D materials and adsorption onto semiconductors. The dye sensitization on semiconductors opened the way for molecular-based dye-sensitized photoelectrochemical cells (DSPECs) devices based on porphyrins and phthalocyanines. The research in photocatalytic systems as discussed herein remains challenging since there are still many limitations making them unfeasible to be used at a large scale application before finding a large-scale application.

Outpacing conventional nicotinamide hydrogenation catalysis by a strongly communicating heterodinuclear photocatalyst

Unequivocal assignment of rate-limiting steps in supramolecular photocatalysts is of utmost importance to rationally optimize photocatalytic activity. By spectroscopic and catalytic analysis of a series of three structurally similar [(tbbpy)2Ru-BL-Rh(Cp*)Cl]3+ photocatalysts just differing in the central part (alkynyl, triazole or phenazine) of the bridging ligand (BL) we are able to derive design strategies for improved photocatalytic activity of this class of compounds (tbbpy = 4,4´-tert-butyl-2,2´-bipyridine, Cp* = pentamethylcyclopentadienyl). Most importantly, not the rate of the transfer of the first electron towards the RhIII center but rather the rate at which a two-fold reduced RhI species is generated can directly be correlated with the observed photocatalytic formation of NADH from NAD+. Interestingly, the complex which exhibits the fastest intramolecular electron transfer kinetics for the first electron is not the one that allows the fastest photocatalysis. With the photocatalytically most efficient alkynyl linked system, it is even possible to overcome the rate of thermal NADH formation by avoiding the rate-determining β-hydride elimination step. Moreover, for this photocatalyst loss of the alkynyl functionality under photocatalytic conditions is identified as an important deactivation pathway.

Triphase Photocatalytic CO2 Reduction over Silver-Decorated Titanium Oxide at a Gas-Water Boundary

Photocatalytic CO₂ reduction reaction (CO₂ RR) is an attractive process to convert CO₂ into valuable chemicals. But this reaction is often restricted by the poor mass transfer of CO₂ in the liquid phase. Here, we have developed a triphase photocatalytic CO₂ RR system by supporting Ag-decorated TiO₂ nanoparticles at a gas-water boundary with hydrophobic-hydrophilic abrupt interfacial wettability. Such a triphase system allows the rapid delivery of gas-phase CO₂ to the surface of photocatalysts while maintaining an efficient water supply and uncovered active sites. Ag-TiO₂ supported at the gas-water boundary showed a CO₂ reduction rate of 305.7 μmol g^-1  h^-1 , without hole scavengers, approximately 8 times higher than the nanoparticles dispersed in the liquid phase. Even using diluted CO₂ (10 %) as the reactant, the CO₂ RR activity was superior to most reported Ag-TiO₂ based photocatalysts using pure CO₂ . The findings provide a general strategy to promote the interfacial CO₂ mass transfer to improve photoactivity and selectivity.

Photocatalytic Systems for CO2 Reduction: Metal-Complex Photocatalysts and Their Hybrids with Photofunctional Solid Materials

Photocatalytic CO₂ reduction is a critical objective in the field of artificial photosynthesis because it can potentially make a total solution for global warming and shortage of energy and carbon resources. We have successfully developed various highly efficient, stable, and selective photocatalytic systems for CO₂ reduction using transition metal complexes as both photosensitizers and catalysts. The molecular architectures for constructing selective and efficient photocatalytic systems for CO₂ reduction are discussed herein. As a typical example, a mixed system of a ring-shaped Re(I) trinuclear complex as a photosensitizer and fac-[Re(bpy)(CO)₃{OC₂H₄N(C₂H₄OH)₂}] as a catalyst selectively photocatalyzed CO₂ reduction to CO with the highest quantum yield of 82% and a turnover number (TON) of over 600. Not only rare and noble metals but also earth abundant ones, such as Mn(I), Cu(I), and Fe(II) can be used as central metal cations. In the case using a Cu(I) dinuclear complex as a photosensitizer and fac-Mn(bpy)(CO)₃Br as a catalyst, the total formation quantum yield of CO and HCOOH from CO₂ was 57% and TON_CO+HCOOH exceeded 1300.

Efficient supramolecular photocatalysts for CO₂ reduction, in which photosensitizer and catalyst units are connected through a bridging ligand, were developed for removing a diffusion control on collisions between a photosensitizer and a catalyst. Supramolecular photocatalysts, in which [Ru(N^∧N)₃]²⁺-type photosensitizer and Re(I) or Ru(II) catalyst units are connected to each other with an alkyl chain, efficiently and selectively photocatalyzed CO₂ reduction in solutions. Mechanistic studies using time-resolved IR and electrochemical measurements provided molecular architecture for constructing efficient supramolecular photocatalysts. A Ru(II)–Re(I) supramolecular photocatalyst constructed according to this molecular architecture efficiently photocatalyzed CO₂ reduction even when it was fixed on solid materials. Harnessing this property of the supramolecular photocatalysts, two types of hybrid photocatalytic systems were developed, namely, photocatalysts with light-harvesting capabilities and photoelectrochemical systems for CO₂ reduction.

Introduction of light-harvesting capabilities into molecular photocatalytic systems should be important because the intensity of solar light shone on the earth’s surface is relatively low. Periodic mesoporous organosilica, in which methyl acridone groups are embedded in the silica framework as light harvesters, was combined with a Ru(II)–Re(I) supramolecular photocatalyst with phosphonic acid anchoring groups. In this hybrid, the photons absorbed by approximately 40 methyl acridone groups were transferred to one Ru(II) photosensitizer unit, and then, the photocatalytic CO₂ reduction commenced.

To use water as an abundant electron donor, we developed hybrid photocatalytic systems combining metal-complex photocatalysts with semiconductor photocatalysts that display high photooxidation powers, in which two photons are sequentially absorbed by the metal-complex photosensitizer and the semiconductor, resulting in both high oxidation and reduction power. Various types of dye-sensitized molecular photocathodes comprising the p-type semiconductor electrodes and the supramolecular photocatalysts were developed. Full photoelectrochemical cells combining these dye-sensitized molecular photocathodes and n-type semiconductor photoanodes achieved CO₂ reduction using only visible light as the energy source and water as the reductant. Drastic improvement of dye-sensitized molecular photocathodes is reported.

The results presented in this Account clearly indicate that we can construct very efficient, selective, and durable photocatalytic systems constructed with the metal-complex photosensitizers and catalysts. The supramolecular-photocatalyst architecture in which the photosensitizer and the catalyst are connected to each other is useful especially on the surface of solid owing to rapid electron transfer from the photosensitizer to the catalyst. On basis of these findings, we successfully constructed hybrid systems of the supramolecular photocatalysts with photoactive solid materials. These hybridizations can add new functions to the metal-complex photocatalytic systems, such as water oxidation and light harvesting.

Biomimetic and Biological Nanoarchitectonics

A post-nanotechnology concept has been assigned to an emerging concept, nanoarchitectonics. Nanoarchitectonics aims to establish a discipline in which functional materials are fabricated from nano-scale components such as atoms, molecules, and nanomaterials using various techniques. Nanoarchitectonics opens ways to form a more unified paradigm by integrating nanotechnology with organic chemistry, supramolecular chemistry, material chemistry, microfabrication technology, and biotechnology. On the other hand, biological systems consist of rational organization of constituent molecules. Their structures have highly asymmetric and hierarchical features that allow for chained functional coordination, signal amplification, and vector-like energy and signal flow. The process of nanoarchitectonics is based on the premise of combining several different processes, which makes it easier to obtain a hierarchical structure. Therefore, nanoarchitectonics is a more suitable methodology for creating highly functional systems based on structural asymmetry and hierarchy like biosystems. The creation of functional materials by nanoarchitectonics is somewhat similar to the creation of functional systems in biological systems. It can be said that the goal of nanoarchitectonics is to create highly functional systems similar to those found in biological systems. This review article summarizes the synthesis of biomimetic and biological molecules and their functional structure formation from various viewpoints, from the molecular level to the cellular level. Several recent examples are arranged and categorized to illustrate such a trend with sections of (i) synthetic nanoarchitectonics for bio-related units, (ii) self-assembly nanoarchitectonics with bio-related units, (iii) nanoarchitectonics with nucleic acids, (iv) nanoarchitectonics with peptides, (v) nanoarchitectonics with proteins, and (vi) bio-related nanoarchitectonics in conjugation with materials.

Mechanism and selectivity of photocatalyzed CO2 reduction by a function-integrated Ru catalyst

The phosphine-substituted Ru(II) polypyridyl complex, [Ru^II-(tpy)(pqn)(MeCN)]²⁺ (RuP), was disclosed to be an efficient photocatalyst for the reduction of CO₂ to CO with excellent selectivity. In this work, density functional calculations were performed to elucidate the reaction mechanism and understand the origin of selectivity. The calculations showed that RuP was first excited to the singlet excited state, followed by intersystem crossing to produce a triplet species (3RuIII(L˙-)-S), which was then reduced by the sacrificial electron donor BIH to generate a Ru^II(L˙^-) intermediate. The ligand of Ru^II(L˙^-) was further reduced to produce a Ru^II(L^2-) intermediate. The redox non-innocent nature of the tpy and pqn ligands endows the Ru center with an oxidation state of +2 after two one-electron reductions. Ru^II(L^2-) nucleophilically attacks CO₂, in which two electrons are delivered from the ligands to CO₂, affording a Ru^II-COOH species after protonation. This is followed by the protonation of the hydroxyl moiety of Ru^II-COOH, coupled with the C-O bond cleavage, resulting in the formation of Ru^II-CO. Ultimately, CO is dissociated after two one-electron reductions. Protonation of Ru^II(L^2-) to generate a Ru^II-hydride, a critical intermediate for the production of formate and H₂, turns out to be kinetically less favorable, even though it is thermodynamically more favorable. This fact is due to the presence of a Ru²⁺ ion in the reduced catalyst, which disfavors its protonation.

Ruthenium Assemblies for CO2 Reduction and H2 Generation: Time Resolved Infrared Spectroscopy, Spectroelectrochemistry and a Photocatalysis Study in Solution and on NiO

Two novel supramolecular complexes RuRe ([Ru(dceb)₂(bpt)Re(CO)₃Cl](PF₆)) and RuPt ([Ru(dceb)₂(bpt)PtI(H₂O)](PF₆)₂) [dceb = diethyl(2,2′-bipyridine)-4,4′-dicarboxylate, bpt = 3,5-di(pyridine-2-yl)-1,2,4-triazolate] were synthesized as new catalysts for photocatalytic CO₂ reduction and H₂ evolution, respectively. The influence of the catalytic metal for successful catalysis in solution and on a NiO semiconductor was examined. IR-active handles in the form of carbonyl groups on the peripheral ligand on the photosensitiser were used to study the excited states populated, as well as the one-electron reduced intermediate species using infrared and UV-Vis spectroelectrochemistry, and time resolved infrared spectroscopy. Inclusion of ethyl-ester moieties led to a reduction in the LUMO energies on the peripheral bipyridine ligand, resulting in localization of the ³MLCT excited state on these peripheral ligands following excitation. RuPt generated hydrogen in solution and when immobilized on NiO in a photoelectrochemical (PEC) cell. RuRe was inactive as a CO₂ reduction catalyst in solution, and produced only trace amounts of CO when the photocatalyst was immobilized on NiO in a PEC cell saturated with CO₂.

No competitive inhibition of bicarbonate or carbonate for formate dehydrogenase from Candida boidinii -catalyzed CO2 reduction

Formate dehydrogenase from Candida boidinii (CbFDH) reversibly catalyzes the formate to CO2 with the redox coupling NAD+/NADH. While many studies on CbFDH-catalyzed formate oxidation in the presence of NAD+ are...

Nanomaterials and hybrid nanocomposites for CO2 capture and utilization: environmental and energy sustainability

Anthropogenic carbon dioxide (CO₂) emissions have dramatically increased since the industrial revolution, building up in the atmosphere and causing global warming. Sustainable CO₂ capture, utilization, and storage (CCUS) techniques are required, and materials and technologies for CO₂ capture, conversion, and utilization are of interest. Different CCUS methods such as adsorption, absorption, biochemical, and membrane methods are being developed. Besides, there has been a good advancement in CO₂ conversion into viable products, such as photoreduction of CO₂ using sunlight into hydrocarbon fuels, including methane and methanol, which is a promising method to use CO₂ as fuel feedstock using the advantages of solar energy. There are several methods and various materials used for CO₂ conversion. Also, efficient nanostructured catalysts are used for CO₂ photoreduction. This review discusses the sources of CO₂ emission, the strategies for minimizing CO₂ emissions, and CO₂ sequestration. In addition, the review highlights the technologies for CO₂ capture, separation, and storage. Two categories, non-conversion utilization (direct use) of CO₂ and conversion of CO₂ to chemicals and energy products, are used to classify different forms of CO₂ utilization. Direct utilization of CO₂ includes enhanced oil and gas recovery, welding, foaming, and propellants, and the use of supercritical CO₂ as a solvent. The conversion of CO₂ into chemicals and energy products via chemical processes and photosynthesis is a promising way to reduce CO₂ emissions and generate more economically valuable chemicals. Different catalytic systems, such as inorganics, organics, biological, and hybrid systems, are provided. Lastly, a summary and perspectives on this emerging research field are presented.

Anthropogenic carbon dioxide (CO₂) emissions have dramatically increased since the industrial revolution, building up in the atmosphere and causing global warming.

Selective Photocatalytic CO2 Reduction by Cobalt Dicyanamide

Photocatalytic conversion of CO2 into chemical fuels is a promising approach to tackle carbon emission and global warming. Herein, we promote a cobalt dicyanamide coordination compound, Co-dca, for the first...

A Visible-Light and Temperature Responsive Host-Guest System: Photoisomerization of a Ruthenium Complex and Inclusion Complex Formation with Cyclodextrins

In the present study, we investigated the visible-light- and thermal-stimuli-responsive properties of a host–guest system based on proximal- and distal-[Ru(C10tpy)(C10pyqu)OH2]2+ (proximal and distal-1, C10tpy = 4’-decyloxy-2,2’;6’,2”-terpyridine, C10pyqu = 2-[2’-(6’-decyloxy)-pyridyl]quinoline). The...

Mechanistic Insights Into Iron(II) Bis(pyridyl)amine-Bipyridine Skeleton for Selective CO2 Photoreduction

A bis(pyridyl)amine-bipyridine-iron(II) framework (Fe(BPAbipy)) of complexes 1-3 is reported to shed light on the multistep nature of CO₂ reduction. Herein, photocatalytic conversion of CO₂ to CO even at low CO₂ concentration (1 %), together with detailed mechanistic study and DFT calculations, reveal that 1 first undergoes two sequential one-electron transfer affording an intermediate with electron density on both Fe and ligand for CO₂ binding over proton. The following 2 H⁺ -assisted Fe-CO formation is rate-determining for selective CO₂ -to-CO reduction. A pendant, proton-shuttling α-OH group (2) initiates PCET for predominant H₂ evolution, while an α-OMe group (3) cancels the selectivity control for either CO or H₂ . The near-unity selectivity of 1 and 2 enables self-sorting syngas production at flexible CO/H₂ ratios. The unprecedented results from one kind of molecular catalyst skeleton encourage insight into the beauty of advanced multi-electron and multi-proton transfer processes for robust CO₂ RR by photocatalysis.