Functionalized Carbon Nanotubes with Ni(II) Bipyridine Complexes as Efficient Catalysts for the Alkaline Oxygen Evolution Reaction

Homoleptic Ni(II) dithiocarbamate complexes as pre-catalysts for the electrocatalytic oxygen evolution reaction

Four new functionalized Ni(II) dithiocarbamate complexes of the formula [Ni(L_x)₂] (1-4) (L₁ = N-methylthiophene-N-3-pyridylmethyl dithiocarbamate, L₂ = N-methylthiophene-N-4-pyridylmethyl dithiocarbamate, L₃ = N-benzyl-N-3-pyridylmethyl dithiocarbamate, and L₄ = N-benzyl-N-4-pyridylmethyl dithiocarbamate) have been synthesized and characterized by IR, UV-vis, and ¹H and ¹³C{¹H} NMR spectroscopic techniques. The solid-state structure of complex 1 has also been determined by single crystal X-ray crystallography. Single crystal X-ray analysis revealed a monomeric centrosymmetric structure for complex 1 in which two dithiocarbamate ligands are bonded to the Ni(II) metal ion in a S^S chelating mode resulting in a square planar geometry around the nickel center. These complexes are immobilized on activated carbon cloth (CC) and their electrocatalytic performances for the oxygen evolution reaction (OER) have been investigated in aqueous alkaline solution. All the complexes act as pre-catalysts for the OER and undergo electrochemical anodic activation to form Ni(O)OH active catalysts. Spectroscopic and electrochemical characterization revealed the existence of the interface of molecular complex/Ni(O)OH, which acts as the real catalyst for the OER. The active catalyst obtained from complex 2 showed the best OER activity achieving 10 mA cm^-2 current density at an overpotential of 330 mV in 1.0 M aqueous KOH solution.

Directionally In Situ Self-Assembled, High-Density, Macropore-Oriented, CoP-Impregnated, 3D Hierarchical Porous Carbon Sheet Nanostructure for Superior Electrocatalysis in the Hydrogen Evolution Reaction

3D ZIF-67-particles-impregnated cellulose-nanofiber nanosheets with oriented macropores are synthesized via directional-freezing-assisted in situ self-assembly, and converted to 3D CoP-nanoparticle (NP)-embedded hierarchical, but macropores-oriented, N-doped carbon nanosheets via calcination and phosphidation. The obtained nanoarchitecture delivers overpotentials at 10 and 50 mA cm^-2 and Tafel slope of 82.1 and 113.4 mV and 40.8 mV dec^-1 in 0.5 M H₂ SO₄ , and of 97.1 and 136.6 mV and 51.2 mV dec^-1 in 1 M KOH, all of which are superior to those of the most reported non-noble-metal-based hydrogen evolution reaction (HER) catalysts. This catalyst even surpasses commercial Pt/C for a much lower overpotential at high current densities, which is essential for large-scale hydrogen production. Its catalytic activity can be further optimized to become one of the best in both 0.5 M H₂ SO₄ and 1 M KOH. The outstanding catalytic activity is ascribed to the uniformly-dispersed small CoP NPs in the 3D carbon sheets and the hierarchical nanostructure with rich oriented pores. This work develops a facile, economical, and universal self-assembly strategy to fabricate uniquely nanostructured hybrids to simultaneously promote charge transfer and mass transport, and also offers an inexpensive and high-performance HER catalyst toward industry-scale water splitting.

Efficient Alkaline Water Oxidation with a Regenerable Nickel Pseudo-Complex

Efficient and robust electrocatalysts are required for the oxygen evolution reaction (OER). Photosystem II-inspired synthetic transition metal complexes have shown promising OER activity in water-poor or mild conditions, yet challenges remain in the improvement of current density and performance stability for practical applications in alkaline electrolytes in contrast to solid-state oxide catalysts. Here, we report that a nickel pseudo-complex (bpy)_zNiO_xH_y (bpy = 2,2'-bipyridine) catalyst, which bridges solid oxide and molecular catalysts, exhibits the highest OER activity among nickel-based catalysts with a turnover frequency of 1.1 s^-1 at an overpotential of 0.30 volts, even outperforming iron-incorporated nickel (oxy)hydroxide under an identical nickel mass load. Benefiting from the strong coordination between bpy and nickel, this (bpy)_zNiO_xH_y catalyst exhibits long-term stability in highly alkaline media at 1.0 mA cm^-2 for over 200 h and at 20 mA cm^-2 for over 60 h. Our findings indicate that dynamically coordinating a small amount of bpy in the catalyst layer efficiently sustains highly active nickel sites for water oxidation, demonstrating a general strategy for improving the activity of transition metal sites with active ligands beyond the incorporation of metal cations to form double-layered hydroxides.

Tailoring unique neural-network-type carbon nanofibers inserted in CoP/NC polyhedra for robust hydrogen evolution reaction

Three-dimensional catalysts have attracted great attention in the field of the hydrogen evolution reaction (HER).However, great challenges remain in structural innovation and performance enhancement. Herein we designed and tailored a unique three-dimensional cross-linked neural network-like CoP-based composite, that is, carbon nanofibers inserted in CoP/NC polyhedra derived from in situ self-assembled bacterial cellulose (BC) wired ZIF-67 polyhedra via high-temperature carbonization and subsequent phosphorization. The obtained integrated catalyst (3-D CNF@CoP/NC) consists of CoP/NC polyhedra with abundant active sites as the "neurons" and carbon nanofibers as the "axons", and displayed remarkable activity with an overpotential of 64.5 mV and 105.6 mV at 10 mA cm^-2 in 0.5 M H₂SO₄ and 1 M KOH respectively and good stability with negligible current change after 80 h of chronoamperometric measurement or 4000 CV cycles. This work offers a high-performance HER catalyst and paves a new way for the rational engineering of unique 3-D interconnected hierarchical porous networks featuring ultrafast charge transfer and mass transport.

Electrocatalytic Isoxazoline-Nanocarbon Metal Complexes

We report the synthesis of new carbon-nanomaterial-based metal chelates that enable effective electronic coupling to electrocatalytic transition metals. In particular, multiwalled carbon nanotubes (MWCNTs) and few-layered graphene (FLG) were covalently functionalized by a microwave-assisted cycloaddition with nitrile oxides to form metal-binding isoxazoline functional groups with high densities. The covalent attachment was evidenced by Raman spectroscopy, and the chemical identity of the surface functional groups was confirmed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The functional carbon nanomaterials effectively chelate precious metals Ir(III), Pt(II), and Ru(III), as well as earth-abundant metals such as Ni(II), to afford materials with metal contents as high as 3.0 atom %. The molecularly dispersed nature of the catalysts was confirmed by X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray spectroscopy (STEM-EDS) elemental mapping. The interplay between the chelate structure on the graphene surface and its metal binding ability has also been investigated by a combination of experimental and computational studies. The defined ligands on the graphene surfaces enable the formation of structurally precise heterogeneous molecular catalysts. The direct attachment of the isoxazoline functional group on the graphene surfaces provides strong electronic coupling between the chelated metal species and the conductive carbon nanomaterial support. We demonstrate that the metal-chelated carbon nanomaterials are effective heterogeneous catalysts in the oxygen evolution reaction with low overpotentials and tunable catalytic activity.

Electrocatalytic synthesis of heterocycles from biomass-derived furfuryl alcohols

It is very attractive yet underexplored to synthesize heterocyclic moieties pertaining to biologically active molecules from biomass-based starting compounds. Herein, we report an electrocatalytic Achmatowicz reaction for the synthesis of hydropyranones from furfuryl alcohols, which can be readily produced from biomass-derived and industrially available furfural. Taking advantage of photo-induced polymerization of a bipyridyl ligand, we demonstrate the facile preparation of a heterogenized nickel electrocatalyst, which effectively drives the Achmatowicz reaction electrochemically. A suite of characterization techniques and density functional theory computations were performed to aid the understanding of the reaction mechanism. It is rationalized that the unsaturated coordination sphere of nickel sites in our electrocatalyst plays an important role at low applied potential, not only allowing the intimate interaction between the nickel center and furfuryl alcohol but also enabling the transfer of hydroxide from nickel to the bound furfuryl alcohol.

Characterizing photocatalysts for water splitting: from atoms to bulk and from slow to ultrafast processes

This review provides a comprehensive overview on characterisation techniques for light-driven redox-catalysts highlighting spectroscopic, microscopic, electrochemical and spectroelectrochemical approaches.

Concomitant polymorphs: an alternative to modulate the oxygen evolution performance of mononuclear nickel complexes

Studying two stable reversible transformations of concomitant polymorphs of NiL2 as heterogeneous catalysts, coplanar NiL2-R exhibits better OER activities than zigzag NiL2-G, dependent on different disparities in crystal packing.

New heteroleptic [Ni(ii) 1,1-dithiolate-phosphine] complexes: synthesis, characterization and electrocatalytic oxygen evolution studies

Four new heteroleptic Ni(ii) complexes with general formula [Ni(ii)(LL')] (L = 2-(methylene-1,1'-dithiolato)-5-phenylcyclohexane-1,3-dione (L1) and 2-(methylene-1,1'-dithiolato)-5,5'-dimethylcyclohexane-1,3-dione (L2); L' = 1,2-bis(diphenylphosphino)ethane (dppe) and bis(diphenylphosphino)monosulphide methane (dppms) have been synthesized and characterized by elemental analysis and spectroscopy (IR, UV-Vis, 1H, 13C{1H} and 31P{1H} NMR). All complexes 1-4 have also been characterized by PXRD and single crystal X-ray crystallography. The solid state molecular structures revealed distorted square planar geometry about the four-coordinate Ni(ii) metal centre together with rare NiH-C intra/intermolecular anagostic interactions in axial positions. In these complexes supramolecular structures have been sustained by non-covalent C-HO, C-OH-O, C-Hπ, C-Hπ (NiCS2, chelate), ππ and HH interactions. Their electrocatalytic properties have been investigated for oxygen evolution reaction (OER) in which complex 2 showed the highest activity with 10 mA cm-2 at the potential of 1.58 V vs. RHE. In addition, complex 2 also exhibits an OER onset potential at 1.52 V vs. RHE.

The Proportion of Fe-NX , N Doping Species and Fe3 C to Oxygen Catalytic Activity in Core-Shell Fe-N/C Electrocatalyst

A bifunctional oxygen electrocatalyst composed of iron carbide (Fe₃ C) nanoparticles encapsulated by nitrogen doped carbon sheets is reported. X-ray photoelectron spectroscopy and X-ray absorption near edge structure revealed the presence of several kinds of active sites (Fe-N_x sites, N doping sites) and the modulated electron structure of nitrogen doped carbon sheets. Fe₃ C@N-CSs shows excellent oxygen evolution and oxygen reduction catalytic activity owing to the modulated electron structure by encapsulated Fe₃ C core via biphasic interfaces electron interaction, which can lower the free energy of intermediate, strengthen the bonding strength and enhance conductivity. Meanwhile, the contribution of the Fe-N_x sites, N doping sites and the effect of Fe₃ C core for the electrocatalytic oxygen reaction is originally revealed. The Fe₃ C@N-CSs air electrode-based zinc-air battery demonstrates a high open circuit potential of 1.47 V, superior charge-discharge performance and long lifetime, which outperforms the noble metal-based zinc-air battery.

Single platinum atoms embedded in nanoporous cobalt selenide as electrocatalyst for accelerating hydrogen evolution reaction

Designing efficient electrocatalysts for hydrogen evolution reaction is significant for renewable and sustainable energy conversion. Here, we report single-atom platinum decorated nanoporous Co_0.85Se (Pt/np-Co_0.85Se) as efficient electrocatalysts for hydrogen evolution. The achieved Pt/np-Co_0.85Se shows high catalytic performance with a near-zero onset overpotential, a low Tafel slope of 35 mV dec⁻¹, and a high turnover frequency of 3.93 s⁻¹ at −100 mV in neutral media, outperforming commercial Pt/C catalyst and other reported transition-metal-based compounds. Operando X-ray absorption spectroscopy studies combined with density functional theory calculations indicate that single-atom platinum in Pt/np-Co_0.85Se not only can optimize surface states of Co_0.85Se active centers under realistic working conditions, but also can significantly reduce energy barriers of water dissociation and improve adsorption/desorption behavior of hydrogen, which synergistically promote thermodynamics and kinetics. This work opens up further opportunities for local electronic structures tuning of electrocatalysts to effectively manipulate its catalytic properties by an atomic-level engineering strategy.

While water splitting chemistry provides a renewable means to produce carbon-neutral hydrogen fuel, the most efficient catalysts require rare and expensive platinum. Here, authors prepare single-atom platinum on cobalt selenide as a high-performance hydrogen evolution electrocatalyst.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Convenient Immobilization of Cobalt Corroles on Carbon Nanotubes through Covalent Bonds for Electrocatalytic Hydrogen and Oxygen Evolution Reactions

Two different methods were used to immobilize Co corroles on carbon nanotubes (CNTs) through covalent bonds. The resulting CNTs engineered with Co corroles were used as electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in aqueous solutions of pH 0, 7, and 14. For both HER and OER in all solutions, the hybrids obtained by attaching Co corroles on CNTs through amidation coupling showed better performance. This is likely because the large surface area and good electrical conductivity of CNTs can be well preserved during the amidation reaction under mild conditions.

A two-dimensional Ni(ii) coordination polymer based on a 3,5-bis(1′,2′,4′-triazol-1′-yl)pyridine ligand for water electro-oxidation

A two-dimensional Ni(ii) coordination polymer based on a novel 3,5-bis(1′,2′,4′-triazol-1′-yl)pyridine rigid ligand was proposed as a novel and efficient molecular catalyst for water oxidation.

Oxygen Evolution Reaction on Nitrogen-Doped Defective Carbon Nanotubes and Graphene

The realization of a hydrogen economy would be facilitated by the discovery of a water-splitting electrocatalyst that is efficient, stable under operating conditions, and composed of earth-abundant elements. Density functional theory simulations within a simple thermodynamic model of the more difficult half-reaction, the anodic oxygen evolution reaction (OER), with a single-walled carbon nanotube as a model catalyst, show that the presence of 0.3-1% nitrogen reduces the required OER overpotential significantly compared to the pristine nanotube. We performed an extensive exploration of systems and active sites with various nitrogen functionalities (graphitic, pyridinic, or pyrrolic) obtained by introducing nitrogen and simple lattice defects (atomic substitutions, vacancies, or Stone-Wales rotations). A number of nitrogen functionalities (graphitic, oxidized pyridinic, and Stone-Wales pyrrolic nitrogen systems) yielded similar low overpotentials near the top of the OER volcano predicted by the scaling relation, which was seen to be closely observed by these systems. The OER mechanism considered was the four-step single-site water nucleophilic attack mechanism. In the active systems, the second or third step, the formation of attached oxo or peroxo moieties, was the potential-determining step of the reaction. The nanotube radius and chirality effects were examined by considering OER in the limit of large radius by studying the analogous graphene-based model systems. They exhibited trends similar to those of the nanotube-based systems but often with reduced reactivity due to weaker attachment of the OER intermediate moieties.

Carbon Nanotubes with Cobalt Corroles for Hydrogen and Oxygen Evolution in pH 0-14 Solutions

Water splitting is promising to realize a hydrogen-based society. The practical use of molecular water-splitting catalysts relies on their integration onto electrode materials. We describe herein the immobilization of cobalt corroles on carbon nanotubes (CNTs) by four strategies and compare the performance of the resulting hybrids for H₂ and O₂ evolution. Co corroles can be covalently attached to CNTs with short conjugated linkers (the hybrid is denoted as H1) or with long alkane chains (H2), or can be grafted to CNTs via strong π-π interactions (H3) or via simple adsorption (H4). An activity trend H1≫H3>H2≈H4 is obtained for H₂ and O₂ evolution, showing the critical role of electron transfer ability on electrocatalysis. Notably, H1 is the first Janus catalyst for both H₂ and O₂ evolution reactions in pH 0-14 aqueous solutions. Therefore, this work is significant to show potential uses of electrode materials with well-designed molecular catalysts in electrocatalysis.

Catalyst Support Effect on the Activity and Durability of Magnetic Nanoparticles: toward Design of Advanced Electrocatalyst for Full Water Splitting

Earth-abundant element-based inorganic-organic hybrid materials are attractive alternatives for electrocatalyzing energy conversion reactions. Such material structures do not only increase the surface area and stability of metal nanoparticles (NPs) but also modify the electrocatalytic performance. Here, we introduce, for the first time, multiwall carbon nanotubes (MWNTs) functionalized with nitrogen-rich emeraldine salt (ES) (denoted as ES-MWNT) as a promising catalyst support to boost the electrocatalytic activity of magnetic maghemite (γ-Fe₂O₃) NPs. The latter component has been synthesized by a simple and upscalable one-step pulsed laser ablation method on Ni core forming the core-shell Ni@γ-Fe₂O₃ NPs. The catalyst (Ni@γ-Fe₂O₃/ES-MWNT) is formed via self-assembly as strong interaction between ES-MWNT and Ni@γ-Fe₂O₃ results in NPs' encapsulation in a thin C-N shell. We further show that Ni does not directly function as an active site in the electrocatalyst but it has a crucial role in synthesizing the maghemite shell. The strong interaction between the NPs and the support improves notably the NPs' catalytic activity toward oxygen evolution reaction (OER) in terms of both onset potential and current density, ranking it among the most active catalysts reported so far. Furthermore, this material shows a superior durability to most of the current excellent OER electrocatalysts as the activity, and the structure, remains almost intact after 5000 OER stability cycles. On further characterization, the same trend has been observed for hydrogen evolution reaction, the other half-reaction of water splitting.