Morphology and CO Oxidation Activity of Pd Nanoparticles on SrTiO3 Nanopolyhedra

Palladium-assisted NOx storage and release on CexZr1-xO2 for passive NOx adsorber in diesel exhaust aftertreatment

Understanding Pd effects on NOx storage and release is crucial for designing passive NOx adsorber (PNA) to control NOx emissions during diesel cold-starts. Herein, we report two oxidation states of Pd species on CexZr1-xO2 regulated by metal-support interaction. Pdδ+ (0 < δ < 2) in Pd/Ce0.25Zr0.75O2 exhibits a high affinity for O2 adsorption, which promotes the oxidation of adsorbed NO to nitrates at 100 °C. These nitrates are thermally unstable due to electron transfer from the Pd atom to the N-O bond, facilitating the decomposition of nitrates to NO2 above 200 °C. In contrast, Pd2+ in Pd/Ce0.75Zr0.25O2 prefer to NO adsorption. A large amount of adsorbed NO and nitrites accumulate on Pd2+ and Ce4+ results in high levels of NO release below 200 °C. For the potential application in PNA, Pd/Ce0.25Zr0.75O2 is recommended due to its proper NOx release temperature as well as better water and SO2 resistance.

On the Design of the Metal-Support Interface in Methanol Electrocatalytic Oxidation

In this work, we present a theoretical investigation of the SrTiO3 perovskite-supported Pd catalyst in the methanol electro-oxidation reaction. In order to determine the metal-support interactions, we designed a system consisting of a Pd (100) double layer supported on one of the two possible terminations of the (100) perovskite surface. These terminations are characterized by different reducibilities of the layers directly interacting with the Pd bilayer and result in the difference in the stability of the surface-bound intermediates. Despite the fact that the Pd surface is identical in terms of geometry, we observed significant differences in the overpotential required for the reaction; in the case of TiO2 termination, the overpotential has been determined to be 0.68 V, while in the case of SrO termination, it amounts to as much as 1.35 V. We further investigate the charge transfers within the components of the system and the geometries of the intermediates to unravel the role of the electron structure on the overall efficiency of the process.

Engineering Dendrimer-Templated, Metal-Organic Framework-Confined Zero-Valent, Transition-Metal Catalysts

We describe and experimentally illustrate a strategy for synthesizing reactant-accessible, supported arrays of well-confined, sub-nanometer to 2 nm, metal(0) clusters and particles-here, copper, palladium, and platinum. The synthesis entails (a) solution-phase binding of metal ions by a generation-2 poly(amidoamine) (PAMAM) dendrimer, (b) electrostatic uptake of metalated, solution-dissolved, and positively charged dendrimers by the negatively charged pores of a zirconium-based metal-organic framework (MOF), NU-1000, and (c) chemical reduction of the incorporated metal ions. The pH of the unbuffered solution is known to control the overall charges of both the dendrimer guests and the hierarchically porous MOF. The combined results of electron microscopy, X-ray spectroscopy, and other measurements indicate the formation and microscopically uniform spatial distributions of zero-valent, monometallic Cu, Pd, and Pt species, with sizes depending strongly on the conditions and methods used for reduction of incorporated metal ions. Access to sub-nanometer clusters is ascribed to the stabilization effects imposed by the two templates (i.e., NU-1000 and dendrimer), which significantly limit the extent to which the metal atoms aggregate; as the thermal input increases, the dendrimer template gradually decomposes, allowing a further aggregation of metal clusters inside the hexagonal mesoporous channel of the MOF template, which ultimately self-limits at 3 nm (i.e., the mesopore width of NU-1000). Using CO oxidation and n-hexene hydrogenation as model reactions in the gas and condensed phases, we show that the dual-templated metal species can act as stable, efficient heterogeneous catalysts.

Surface Modification of Catalysts via Atomic Layer Deposition for Pollutants Elimination

In recent years, atomic layer deposition (ALD) is widely used for surface modification of materials to improve the catalytic performance for removing pollutants, e.g., CO, hydrocarbons, heavy metal ions, and organic pollutants, and much progress has been achieved. In this review, we summarize the recent development of ALD applications in environmental remediation from the perspective of surface modification approaches, including conformal coating, uniform particle deposition, and area-selective deposition. Through the ALD conformal coating, the activity of photocatalysts improved. Uniform particle deposition is used to prepare nanostructured catalysts via ALD for removal of air pollutions and dyes. Area-selective deposition is adopted to cover the specific defects on the surface of materials and synthesize bimetallic catalysts to remove CO and other contaminations. In addition, the design strategy of catalysts and shortcomings of current studies are discussed in each section. At last, this review points out some potential research trends and comes up with a few routes to further improve the performance of catalysts via ALD surface modification and deeper investigate the ALD reaction mechanisms.

Exsolution of Catalytically Active Iridium Nanoparticles from Strontium Titanate

The search for new functional materials that combine high stability and efficiency with reasonable cost and ease of synthesis is critical for their use in renewable energy applications. Specifically in catalysis, nanoparticles, with their high surface-to-volume ratio, can overcome the cost implications associated with otherwise having to use large amounts of noble metals. However, commercialized materials, that is, catalytic nanoparticles deposited on oxide supports, often suffer from loss of activity because of coarsening and carbon deposition during operation. Exsolution has proven to be an interesting strategy to overcome such issues. Here, the controlled emergence, or exsolution, of faceted iridium nanoparticles from a doped SrTiO₃ perovskite is reported and their growth preliminary probed by in situ electron microscopy. Upon reduction of SrIr_0.005Ti_0.995O₃, the generated nanoparticles show embedding into the oxide support, therefore preventing agglomeration and subsequent catalyst degradation. The advantages of this approach are the extremely low noble metal amount employed (∼0.5% weight) and the catalytic activity reported during CO oxidation tests, where the performance of the exsolved SrIr_0.005Ti_0.995O₃ is compared to the activity of a commercial catalyst with 1% loading (1% Ir/Al₂O₃). The high activity obtained with such low doping shows the possibility of scaling up this new catalyst, reducing the high cost associated with iridium-based materials.

Linear Activation Energy-Reaction Energy Relations for LaBO3 (B = Mn, Fe, Co, Ni) Supported Single-Atom Platinum Group Metal Catalysts for CO Oxidation

Single-atom catalysts are at the center of attention of the heterogeneous catalysis community because they exhibit unique electronic structures distinct from nanoparticulate forms, resulting in very different catalytic performance combined with increased usage of often costly transition metals. Proper selection of a support that can stably keep the metal in a high dispersion is crucial. Here, we employ spin-polarized density functional theory and microkinetics simulations to identify optimum LaBO₃ (B = Mn, Fe, Co, Ni) supported catalysts dispersing platinum group metals as atoms on their surface. We identify a strong correlation between the CO adsorption energy and the d-band center of the doped metal atom. These CO adsorption strength differences are explained in terms of the electronic structure. In general, Pd-doped surfaces exhibit substantially lower activation barriers for CO₂ formation than the Rh- and Pt-doped surfaces. Strong Brønsted-Evans-Polanyi correlations are found for CO oxidation on these single-atom catalysts, providing a tool to predict promising compositions. Microkinetics simulations show that Pd-doped LaCoO₃ is the most active catalyst for low-temperature CO oxidation. Moderate CO adsorption strength and low reaction barriers explain the high activity of this composition. Our approach provides guidelines for the design of highly active and cost-effective perovskite supported single-atom catalysts.

Ba-addition induced enhanced surface reducibility of SrTiO3: implications on catalytic aspects

Surface reducibility engineering is one of the vital tools to enhance the catalytic activity of materials. A heavy redox treatment can be utilized to affect the structure and surface of catalytic materials. Here, we choose SrTiO3 (STO) with a cubic perovskite structure as a system to induce oxygen vacancies by using nascent hydrogen from NaBH4 leading to a heavily reduced version of SrTiO3 (RSTO). To further understand the surface reduction and its dependence on foreign-ion (Ba) incorporation into SrTiO3, Sr0.5Ba0.5TiO3 (SBTO) and BaTiO3 (BTO) are synthesized using a facile hydrothermal method. The reduced version of the pristine and mixed oxide shows distinct optical absorptions, indicating oxygen vacancy-mediated reducibility engineering. Detailed CO oxidation experiments suggest the order of activity over the as-prepared and reduced supports as STO > SBTO > BTO and RSBTO > RSTO > RBTO, respectively. The interesting observation of reversal of CO oxidation activity over STO and SBTO after reduction negates the assumption of a similar intensity of reduction on the surfaces of these oxide supports. The fundamental aspect of surface reducibility is addressed using temperature programmed reduction/oxidation (TPR/TPO) and XPS.

Direct Visualization of Independent Ta Centers Supported on Two-Dimensional TiO2 Nanosheets

Highly dispersed, supported oxides are ubiquitous solid catalysts but can be challenging to characterize with atomic precision. Here, it is shown that crystalline anatase TiO₂ nanosheets (∼5 nm thick) are ideal supports for imaging highly dispersed active sites. Ta cations were deposited by several routes, and high-resolution high angle annular dark-field scanning transmission electron microscopy was used to determine the location of Ta with respect to the TiO₂ lattice and quantify Ta-Ta distances. In the best case, it is shown that >80% of Ta atoms are isolated from one another, whereas other techniques are blind to this critical catalytic property or give only qualitative estimates. TiO₂ nanosheets may prove to be a useful platform for other types of catalysis studies.

Understanding the Impact of Defects on Catalytic CO Oxidation of LaFeO3-Supported Rh, Pd, and Pt Single-Atom Catalysts

Understanding the intrinsic catalytic properties of perovskite materials can accelerate the development of highly active and abundant complex oxide catalysts. Here, we performed a first-principles density functional theory study combined with a microkinetics analysis to comprehensively investigate the influence of defects on catalytic CO oxidation of LaFeO₃ catalysts containing single atoms of Rh, Pd, and Pt. La defects and subsurface O vacancies considerably affect the local electronic structure of these single atoms adsorbed at the surface or replacing Fe in the surface of the perovskite. As a consequence, not only the stability of the introduced single atoms is enhanced but also the CO and O₂ adsorption energies are modified. This also affects the barriers for CO oxidation. Uniquely, we find that the presence of La defects results in a much higher CO oxidation rate for the doped perovskite surface. A linear correlation between the activation barrier for CO oxidation and the surface O vacancy formation energy for these models is identified. Additionally, the presence of subsurface O vacancies only slightly promotes CO oxidation on the LaFeO₃ surface with an adsorbed Rh atom. Our findings suggest that the introduction of La defects in LaFeO₃-based environmental catalysts could be a promising strategy toward improved oxidation performance. The insights revealed herein guide the design of the perovskite-based three-way catalyst through compositional variation.

Well-defined palladium–ceria interfacial electronic effects trigger CO oxidation

The electron transfer from Pd cubes to CeO₂ rods via the interfaces triggered low-temperature CO oxidation.