Redox-Controlled Polymerization and Copolymerization

Dinuclear group IV metal complexes based on a bis(indenyl)-(E/Z)-stilbene platform: a potential prototype of "photoswitchable" catalysts for olefin polymerization

The preparation of dizirconium complexes based on a novel bis(indenyl)-(E/Z)-stilbene platform was explored. Negishi coupling between the in situ-generated diorganozincates obtained from the respective o/m/p-(E/Z)-dibromostilbenes and the bromo-functionalized zirconocene (η5-Cp*)(η5-2-methyl-4-bromoindenyl)ZrCl2, or, alternatively, the preparation of bis(indene)stilbene pro-ligands {o/m/p-(E/Z)-BisIndSB}H2 through Negishi coupling of the corresponding dibromostilbenes with 4-bromoindene and subsequent metallation/transmetallation with Cp*ZrCl3 or Zr(NMe2)4, allowed the preparation of a series of dinuclear complexes. These were analyzed by NMR spectroscopy and some of them by iASAP-mass spectrometry and by X-ray diffraction studies. Experimental results were compared with DFT modelling of the targeted dinuclear complexes evidencing that the (E)-complexes are more stable by 7-11 kcal mol-1 than their (Z)-analogues. Thermal, uncontrolled isomerization of (Z)- to (E)-stilbene platform was observed experimentally for some systems, in the course of their synthesis, either from the (Z)-dibromostilbene reagent or on the dinuclear complexes resulting from the Negishi coupling. Photoisomerization of the (E)- and (Z)-{BisIndSB}H2 proligands and of complexes {o-(E)-BisIndSB}(Zr(NMe2)3)2 and {m-(E)-BisIndSB}(ZrCl2Cp*)2 was investigated under a variety of conditions. It proved effective for the proligands but induced decomposition of the dizirconium complexes. Time-dependent DFT (TD-DFT) computations were performed to identify unambiguously the nature of the observed absorption bands and account for decomposition of the complexes. Preliminary ethylene/1-hexene homo- and copolymerization investigations did not evidence putative cooperativity phenomena within these dinuclear systems nor significantly differentiated behavior between the (Z)- and (E)-isomers of a given type of complex under the reaction conditions investigated.

Electronic Influences on the Dynamic Range of Photoswitchable Dithienylethene-Thiourea Organocatalysts

Thiourea-based organocatalysts bearing a photoswitchable dithienylethene (DTE) core and a wide range of substituents were prepared and extensively tested for their ability to accelerate the Michael reaction between acetylacetone and trans-β-nitrostyrene. There is a strong correlation between the Hammett parameter of the modulating groups and catalytic activity following UV irradiation. Electron-withdrawing groups afford the largest reactivity difference between the catalysts in their ring-open form and their ring-closed isomer, with evidence for electronic coupling between the two halves in both oDTE and cDTE.

Valence-variable Catalysts for Redox-controlled Switchable Ring-opening Polymerization

As a representative class of sustainable polymer materials, biodegradable polymers have attracted increasing interest in recent years. Despite significant advance of related polymerization techniques, realizing high sequence-control and easy-handling in ring-opening (co)polymerizations still remains a central challenge. To this end, a promising solution is the development of valence-variable metal-based catalysts for redox-induced switchable polymerization of cyclic esters, cyclic ethers, epoxides, and CO₂ . Through a valence-determined electron effect, the switch between different catalytically active states as well as dormant state contributes to convenient formation of polymer products with desired microstructures and various practical performances. This redox-controlled switchable strategy for controlled synthesis of polymers is overviewed in this Review with a focus on potential applications and challenges for further studies.

Recent Advances in the Copolymerization of Ethylene with Polar Comonomers by Nickel Catalysts

The less-expensive and earth-abundant nickel catalyst is highly promising in the copolymerization of ethylene with polar monomers and has thus attracted increasing attention in both industry and academia. Herein, we have summarized the recent advancements made in the state-of-the-art nickel catalysts with different types of ligands for ethylene copolymerization and how these modifications influence the catalyst performance, as well as new polymerization modulation strategies. With regard to α-diimine, salicylaldimine/ketoiminato, phosphino-phenolate, phosphine-sulfonate, bisphospnine monoxide, N-heterocyclic carbene and other unclassified chelates, the properties of each catalyst and fine modulation of key copolymerization parameters (activity, molecular weight, comonomer incorporation rate, etc.) are revealed in detail. Despite significant achievements, many opportunities and possibilities are yet to be fully addressed, and a brief outlook on the future development and long-standing challenges is provided.

Simple and Rapid Access toward AB, BAB and ABAB Block Copolyesters from One-Pot Monomer Mixtures Using an Indium Catalyst

The synthesis of well-defined block copolymers from one-pot monomer mixtures is particularly challenging when monomers are from the same class and show similar reactivity. Herein, an indium-based catalyst that shows comparable rates in the ring-opening homopolymerization of β-butyrolactone (β-BL) and ε-decalactone (ε-DL), demonstrates monomer-selective behavior in one-pot copolymerizations of β-BL and ε-DL. This provides simple and rapid access to well-defined di-, tri-, or tetra-block copolyesters from monomer mixtures. The sequence-controlled nature of these polymers was confirmed by kinetic analysis, ¹³C{¹H} NMR spectroscopy, DSC, and TGA measurements.

Reversible On/Off Switching of Lactide Cyclopolymerization with a Redox-Active Formazanate Ligand

Redox-switching of a formazanate zinc catalyst in ring-opening polymerization (ROP) of lactide is described. Using a redox-active ligand bound to an inert metal ion (Zn²⁺) allows modulation of the catalytic activity by reversible reduction/oxidation chemistry at a purely organic fragment. A combination of kinetic and spectroscopic studies, together with mass spectrometry of the catalysis mixture, provides insight in the nature of the active species and the initiation of lactide ring-opening polymerization. The mechanistic data highlight the key role of the redox-active ligand and provide a rationale for the formation of cyclic polymer.

Diblock dialternating terpolymers by one-step/one-pot highly selective organocatalytic multimonomer polymerization

The synthesis of well-defined block copolymers from a mixture of monomers without additional actions ("one-pot/one-step") is an ideal and industrially valuable method. In addition, the presence of controlled alternating sequences in one or both blocks increases the structural diversity of polymeric materials, but, at the same time, the synthetic difficulty. Here we show that the "one-pot/one-step" ring-opening terpolymerization of a mixture of three monomers (N-sulfonyl aziridines; cyclic anhydrides and epoxides), with tert-butylimino-tris(dimethylamino)phosphorene (t-BuP1) as a catalyst, results in perfect diblock dialternating terpolymers having a sharp junction between the two blocks, with highly-controllable molecular weights and narrow molecular weight distributions (Ð < 1.08). The organocatalyst switches between two distinct polymerization cycles without any external stimulus, showing high monomer selectivity and kinetic control. The proposed mechanism is based on NMR, in-situ FTIR, SEC, MALDI-ToF, reactivity ratios, and kinetics studies.

Half-sandwich manganese complexes Cp(CO)2Mn(NHC) as redox-active organometallic fragments

Oxidation of the half-sandwich Mn^I complexes Cp(CO)₂Mn(NHC) bearing dialkyl-, arylalkyl- and diarylsubstituted N-heterocyclic carbene ligands (NHC = IMe, IMeMes, IMes) affords the corresponding stable Mn^II radical cations [Cp(CO)₂Mn(NHC)](BF₄) isolated in 92-95% yield. Systematic X-ray diffraction studies of the series of Mn^I and Mn^II NHC complexes revealed the expected characteristic structural changes upon oxidation, namely the elongation of the Mn-CO and Mn-NHC bonds as well as the diminution of the OC-Mn-CO angle. ESR spectra of [Cp(CO)₂Mn(IMes)](BF₄) in frozen solution (CH₂Cl₂/toluene 1 : 1, 70 K) allowed the identification of two conformers for this complex and their structural assignment using DFT calculations. The stability of these NHC complexes in both metal oxidation states, moderate oxidation potentials and the ease of detection of Mn^II species by a variety of spectroscopic techniques (UV-Vis, IR, paramagnetic ¹H NMR, and ESR) make these compounds promising objects for applications as redox-active organometallic fragments.

Force-modulated reductive elimination from platinum(ii) diaryl complexes

Coupled mechanical forces are known to drive a range of covalent chemical reactions, but the effect of mechanical force applied to a spectator ligand on transition metal reactivity is relatively unexplored. Here we quantify the rate of C(sp2)-C(sp2) reductive elimination from platinum(ii) diaryl complexes containing macrocyclic bis(phosphine) ligands as a function of mechanical force applied to these ligands. DFT computations reveal complex dependence of mechanochemical kinetics on the structure of the force-transducing ligand. We validated experimentally the computational finding for the most sensitive of the ligand designs, based on MeOBiphep, by coupling it to a macrocyclic force probe ligand. Consistent with the computations, compressive forces decreased the rate of reductive elimination whereas extension forces increased the rate relative to the strain-free MeOBiphep complex with a 3.4-fold change in rate over a ∼290 pN range of restoring forces. The calculated natural bite angle of the free macrocyclic ligand changes with force, but 31P NMR analysis and calculations strongly suggest no significant force-induced perturbation of ground state geometry within the first coordination sphere of the (P-P)PtAr2 complexes. Rather, the force/rate behavior observed across this range of forces is attributed to the coupling of force to the elongation of the O⋯O distance in the transition state for reductive elimination. The results suggest opportunities to experimentally map geometry changes associated with reactions in transition metal complexes and potential strategies for force-modulated catalysis.

Photoresponsive Palladium and Nickel Catalysts for Ethylene Polymerization and Copolymerization

In this contribution, we install an azobenzene functionality in olefin polymerization catalysts and use light to modulate their properties via photoinduced trans-cis isomerization of the azobenzene moiety. The initially targeted azobenzene-functionalized α-diimine palladium and nickel catalysts are not photoresponsive. To address this issue, an imine-amine system bearing interrupted conjugation with the metal center, and a sandwich-type α-diimine system bearing an azobenzene unit at a position covalently far from the metal center were prepared and studied. We demonstrate that light can be used to tune their properties in ethylene polymerization and copolymerization with polar comonomers, enabling light-induced control of the polymerization processes, polymer microstructures and polymer properties. More interestingly, the light-mediated property changes were attributed to ligand electronic effects in one system and ligand steric effects in the other.

Theoretical Insight into the Effect of Fluorine-Functionalized Metal-Organic Framework Supported Palladium Single-Site Catalyst in the Ethylene Dimerization Reaction

Ethylene dimerization reaction is one of the most common mechanisms for the production of 1-butene. Recently, metal-organic frameworks (MOFs) have received extensive attention in this area since they combine all the advantages of homogeneous and heterogeneous catalysts in a single compound. Here a computational mechanistic study of MOF-supported palladium single-site catalyst for ethylene dimerization reaction is reported. Catalytic systems with both biphenyl-type backbone as organic ligand and its fluorine-functionalization have been investigated to reveal the origin of ligand effects on the catalytic activity and selectivity. The calculations revealed that the nonfluorinated palladium MOF catalyst undergoes dimerization over isomerization reaction. Then the influence of the fluorine-functionalized organic ligand was compared in the dimerization catalytic cycle, which was strongly favored in terms of activity and selectivity. Catalyst-substrate interactions were analyzed by energy decomposition analysis revealing the critical role of ligand backbone functionalization on the activity. This theoretical analysis identified three chemically meaningful dominant effects on these catalysts; steric, electrostatic and charge transfer effects. The steric effects promote nonfluorinated MOF catalyst, whereas the electrostatic effects are the dominant factor that promotes its fluorinated counterpart. This theoretical study provides feedback with future experimental studies about the role of fluorine ligand functionalization in palladium MOF catalysts for ethylene dimerization reaction.

Monomer Controlled Switchable Copolymerization: A Feasible Route for the Functionalization of Poly(lactide)

Switchable polymerization is an attractive strategy to enable the sequential selectivity of multi-block polyesters. Besides, these well-defined multi-block polyesters could enable further modification for wider applications. Herein, based on the reversible insertion of CO₂ by Salen-Mn^III , a new monomer controlled self-switchable polymerization route was developed. Chemoselective ring opening copolymerization of O-carboxyanhydrides (OCAs) and lactide (LA) was explored without cocatalyst. The sequential conversion of OCAs and LA into the polymer chain could form multi-block polyesters. Based on this strategy, a series of multi-block polyesters with different pendant groups were synthesized. Furthermore, by modifying the propargyl-containing copolymers with quaternary ammonium groups, we have realized antibacterial functionalization of PLA. These results imply the potential application of this strategy for the fabrication of functional polymers for biomedical applications.

Theoretical insight into the opposite redox activity of iron complexes toward the ring opening polymerization of lactide and epoxide

The origin of opposite reactivity in the ring-opening polymerization of lactide (LA) and cyclohexene oxide (CHO) catalyzed by redox-switchable bis(imino)pyridine iron complexes has been computationally elucidated.

Influence of intramolecular π–π and H-bonding interactions on pyrazolylimine nickel-catalyzed ethylene polymerization and co-polymerization

Pyrazolylimine-based nickel catalysts bearing intramolecular π–π and H-bonding interactions show high activity, thermal stability, and Mn of polyethylene.

Aluminium(iii) and zinc(ii) complexes of azobenzene-containing ligands for ring-opening polymerisation of ε-caprolactone and rac-lactide

The ability to control the outcome of polymerisations using an external stimulus remains a formidable challenge.

A switchable dimeric yttrium complex and its three catalytic states in ring opening polymerization

A dimeric yttrium phenoxide complex can be oxidized in a stepwise fashion to access three oxidation states. The three states show different activity in the ring opening polymerization of cyclic esters and epoxides.

Homo- and copolymerization of norbornene using tridentate IzQO palladium catalysts with dimethylaminoethyl as a side arm

Rigid IzQO–Pd catalysts were synthesized by Rh(iii)-catalyzed C–H/alkyne annulation and applied for the homo- and copolymerizations of norbornene with polar vinyl monomers.

Redox-controlled syndio-specific polymerization of styrene catalyzed by ferrocenyl functionalized half-sandwich scandium complexes

Redox-controlled polymerization is one of the new and efficient strategies to precisely construct the microstructures of polymeric materials, and thus has received increasing attention in the chemical community. Salt metathesis of ScCl₃ with 1 equiv. of Fc(1-C₉H₆)Li (where Fc = ferrocenyl group), followed by the addition of 2 equiv. of LiCH₂C₆H₄NMe₂-o in THF at room temperature gave the ferrocenyl functionalized half-sandwich scandium bis(o-dimethylaminobenzyl) complex [Fc(1-C₉H₆)]Sc(CH₂C₆H₄NMe₂-o)₂ (1) in 89% isolated yield. This complex was characterized by elemental analysis, FT-IR spectroscopy, NMR spectroscopy and single-crystal X-ray diffraction. Treatment of 1 with 1 equiv. of [Ph₃C][B(C₆F₅)₄] in THF generated the THF-coordinated cationic half-sandwich scandium mono(o-dimethylaminobenzyl) complex {[Fc(1-C₉H₆)]Sc(CH₂C₆H₄NMe₂-o)}{[B(C₆F₅)₄]} (2-THF₂). Switching in situ between the oxidized and reduced forms of active THF-free species (originally generated from 1/[Ph₃C][B(C₆F₅)₄] in situ) resulted in the redox-controlled syndio-specific polymerization of styrene.

Designing a Cr-catalyst bearing redox non-innocent phenalenyl-based ligand towards hydrosilylative CO2 functionalization

Herein, we report the synthesis of a Cr(iii)-complex bearing a redox non-innocent phenalenyl-based ligand and its use as a catalyst for SET mediated hydrosilylative reduction of carbon dioxide towards formylation of primary amides under mild conditions. A preliminary mechanistic picture for this transformation has been proposed by isolation and characterization of several reactive intermediates.

Living Chain-Walking (Co)Polymerization of Propylene and 1-Decene by Nickel α-Diimine Catalysts

Homo- and copolymers of propylene and 1-decene were synthesized by controlled chain-walking (co)polymerization using phenyl substituted α-diimine nickel complexes activated with modified methylaluminoxane (MMAO). This catalytic system was found to polymerize propylene in a living fashion to furnish high molecular weight ethylene-propylene (EP) copolymers. The copolymerizations proceeded to give high molecular weight P/1-decene copolymers with narrow molecular weight distribution (Mw/Mn ≈ 1.2), which indicated a living nature of copolymerization at room temperature. The random copolymerization results indicated the possibility of precise branched structure control, depending on the polymerization temperature and time.