Hot-Carrier Organic Synthesis via the Near-Perfect Absorption of Light

Cu@CuOx/WO3 with photo-regulated singlet oxygen and oxygen adatoms generation for selective photocatalytic aromatic amines to imines

Photocatalysts can absorb light and activate molecular O2 under mild conditions, but the generation of unsuitable reactive oxygen species often limits their use in synthesizing fine chemicals. To address this issue, we disperse 1 wt% copper on tungsten trioxide (WO3) support to create an efficient catalyst for selective oxidative coupling of aromatic amines to imines under sunlight irradiation at room temperature. Copper consists of a metallic copper core and an oxide shell. Experimental and density functional theory calculations have confirmed that Cu2O is the primary activation site. Under λ < 475 nm, the light excites electrons of the valence bands in Cu2O and WO3, which activate O2 to superoxide radical •O2-. Then rapidly transforms into oxygen adatoms (•O) and oxygen anion radicals (•O-) species on the surface of Cu2O. Simultaneously, it is captured by holes in the WO3 valence band to generate singlet oxygen (1O2). •O bind to 1O2 promoting the coupling reaction of amines. When λ > 475 nm, intense light absorption due to the localized surface plasmon resonance excites numerous electrons in Cu to promote the oxidative coupling with the adsorbed O2. This study presents a promising approach towards the design of high-performance photocatalysts for solar energy conversion and environmentally-friendly oxidative organic synthesis.

Two {CuI[P4Mo6]2}-Based Coordination Polymers Incorporating In Situ Converted Tetrapyridyl Ligands for Trace Analysis of Nitrofuran Antibiotics

Nitrofurans are important synthetic broad-spectrum antibacterial drugs with the basic structure of 5-nitrofuran. Due to their toxicity, it is essential to develop a sensitive sensor with strong anti-interference capabilities for their detection. In this work, two {P4Mo6O31}12--based compounds, [H4(HPTTP)]2{CuI[Mo12O24(OH)6(PO4)3(HPO4)(H2PO4)4]}·xH2O (x = 13 for (1), 7 for (2); HPTTP = 4,4',4″,4‴-(1H-pyrrole-2,3,4,5-tetrayl)tetrapyridine), exhibiting similar coordination but distinct stacking modes. Both compounds were synthesized and used for the electrochemical detection of nitrofuran antibiotics. The tetrapyridine-based ligand was generated in situ during assembly, and its potential mechanism was discussed. Composite electrode materials, formed by mixing graphite powder with compounds 1-2 and physically grinding them, proved to be highly effective in the electrochemical trace detection of furazolidone (FZD) and furaltadone hydrochloride (FTD·HCl) under optimal conditions. Besides, the possible electrochemical detection mechanisms of two nitro-antibiotics were studied.

Sol-Gel TiO2 Thin Film on Au Nanoparticles for Heterogeneous Plasmonic Photocatalysis

A new, simple method for preparing substrates for photocatalytic applications under visible light is presented. It is based on the preparation of a dense array of gold nanoparticles (AuNPs) by thermal dewetting of a thin gold film followed by spin-coating of a thin TiO2 film prepared by sol-gel chemistry. The photocatalytic properties of these nanocomposite films are studied by surface-enhanced Raman spectroscopy (SERS) following the N-demethylation reaction of methylene blue as a model reaction. This approach shows that the semiconducting layer on the AuNPs can significantly increase the efficiency of the photoinduced reaction. The SERS study also illustrates the influence of parameters such as TiO2 thickness and position (on or under the AuNPs). Ultimately, this study emphasizes that the primary mechanism behind the N-demethylation reaction is both the increase in extinction and the improved electron transfer facilitated by the semiconducting layer. On the other hand, exclusive reliance on photothermal effects is ruled out.

Designing Metasurfaces for Efficient Solar Energy Conversion

Metasurfaces have recently emerged as a promising technological platform, offering unprecedented control over light by structuring materials at the nanoscale using two-dimensional arrays of subwavelength nanoresonators. These metasurfaces possess exceptional optical properties, enabling a wide variety of applications in imaging, sensing, telecommunication, and energy-related fields. One significant advantage of metasurfaces lies in their ability to manipulate the optical spectrum by precisely engineering the geometry and material composition of the nanoresonators' array. Consequently, they hold tremendous potential for efficient solar light harvesting and conversion. In this Review, we delve into the current state-of-the-art in solar energy conversion devices based on metasurfaces. First, we provide an overview of the fundamental processes involved in solar energy conversion, alongside an introduction to the primary classes of metasurfaces, namely, plasmonic and dielectric metasurfaces. Subsequently, we explore the numerical tools used that guide the design of metasurfaces, focusing particularly on inverse design methods that facilitate an optimized optical response. To showcase the practical applications of metasurfaces, we present selected examples across various domains such as photovoltaics, photoelectrochemistry, photocatalysis, solar-thermal and photothermal routes, and radiative cooling. These examples highlight the ways in which metasurfaces can be leveraged to harness solar energy effectively. By tailoring the optical properties of metasurfaces, significant advancements can be expected in solar energy harvesting technologies, offering new practical solutions to support an emerging sustainable society.

Single-Atom Engineering of Covalent Organic Framework for Photocatalytic H2 Production Coupled with Benzylamine Oxidation

In photocatalysis, reducing the exciton binding energy and boosting the conversion of excitons into free charge carriers are vital to enhance photocatalytic activity. This work presents a facile strategy of engineering Pt single atoms on a 2D hydrazone-based covalent organic framework (TCOF) to promote H2 production coupled with selective oxidation of benzylamine. The optimised TCOF-Pt SA photocatalyst with 3 wt% Pt single atom exhibited superior performance to TCOF and TCOF-supported Pt nanoparticle catalysts. The production rates of H2 and N-benzylidenebenzylamine over TCOF-Pt SA3 are 12.6 and 10.9 times higher than those over TCOF, respectively. Empirical characterisation and theoretical simulation showed that the atomically dispersed Pt is stabilised on the TCOF support through the coordinated N1 -Pt-C2 sites, thereby induing the local polarization and improving the dielectric constant to reach the low exciton binding energy. These phenomena led to the promotion of exciton dissociation into electrons and holes and the acceleration of the separation and transport of photoexcited charge carriers from bulk to the surface. This work provides new insights into the regulation of exciton effect for the design of advanced polymer photocatalysts.

Optimal Geometry for Plasmonic Hot-Carrier Extraction in Metal-Semiconductor Nanocrystals

Plasmon-induced energy and charge transfer from metal nanostructures hold great potential for harvesting solar energy. Presently, the efficiencies of charge-carrier extraction are still low due to the competitive ultrafast mechanisms of plasmon relaxation. Using single-particle electron energy loss spectroscopy, we correlate the geometrical and compositional details of individual nanostructures to their carrier extraction efficiencies. By removing ensemble effects, we are able to show a direct structure-function relationship that permits the rational design of the most efficient metal-semiconductor nanostructures for energy harvesting applications. In particular, by developing a hybrid system comprising Au nanorods with epitaxially grown CdSe tips, we are able to control and enhance charge extraction. We show that optimal structures can have efficiencies as high as 45%. The quality of the Au-CdSe interface and the dimensions of the Au rod and CdSe tip are shown to be critical for achieving these high efficiencies of chemical interface damping.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Two-Dimensional Janus Film with Au Nanoparticles Assembled on Trinuclear Gold(I) Pyrazolate Coordination Nanosheets for Photocatalytic H2 Evolution

A two-dimensional (2D) Janus film with self-assembled gold nanoparticles (AuNPs) is a class of fascinating materials that may offer unprecedented opportunities to realize diverse applications due to their two distinct faces with anisotropic properties. In this work, we report a novel, straightforward strategy for the preparation of a bilayer coordination nanosheet (CONASH)/AuNP Janus film, where the CONASH features infinite trinuclear gold(I) pyrazolate cyclic complexes with electron-accepting viologen as bridges. The bilayer film has visible light absorption and redox properties and showcased promising photocatalytic H₂ evolution activity by virtue of the formed unique heterojunction structure between AuNPs and CONASH. The current study opens a novel pathway for controlled fabrication of the 2D Janus film with assembled AuNPs for photocatalytic applications.

A Stacked Plasmonic Metamaterial with Strong Localized Electric Field Enables Highly Efficient Broadband Light-Driven CO2 Hydrogenation

Light utilization largely governs the performance of CO₂ photoconversion, whereas most of the materials that are implemented in such an application are restricted in a narrow spectral absorption range. Plasmonic metamaterials with a designable regular pattern and facile tunability are excellent candidates for maximizing light absorption to generate substantial hot electrons and thermal energy. Herein, a concept of coupling a Au-based stacked plasmonic metamaterial with single Cu atoms in alloy, as light absorber and catalytic sites, respectively, is reported for gas-phase light-driven catalytic CO₂ hydrogenation. The metamaterial structure works in a broad spectral range (370-1040 nm) to generate high surface temperature for photothermal catalysis, and also induces strong localized electric field in favor of transfer of hot electrons and reduced energy barrier in CO₂ hydrogenation. This work unravels the significant role of a strong localized electric field in photothermal catalysis and demonstrates a scalable fabrication approach to light-driven catalysts based on plasmonic metamaterials.

New carbon nitride close to C6N7 with superior visible light absorption for highly efficient photocatalysis

The rational design and construction of novel two-dimensional (2D) carbon nitrides (CNs) beyond g-C₃N₄ is a hot topic in the fields of chemistry and materials. Inspired by the polymerisation of urea, we have prepared a series of novel C-C bridged heptazine CNs UO_x (where x is the ratio of urea to oxamide, x = 1, 1.5, 2, 2.5, and 3), which are similar to (C₆N₇)_n, upon the introduction of oxamide. As predicted using density functional theory (DFT) calculations, the conjugated structure of UO_x was effectively extended from an individual heptazine to the entire material. Consequently, its bandgap was reduced to 2.05 eV, and its absorption band edge was significantly extended to 600 nm. Furthermore, its carrier transfer and separation were significantly enhanced, establishing its superior photocatalytic activity. The optimised UO₂ exhibits a superior photocatalytic hydrogen production rate about 108.59 μmol h^-1 (using 10 mg of catalyst) with an apparent quantum efficiency (AQE) of 36.12% and 0.33% at 420 and 600 nm, respectively, which is one of the most active novel CNs reported to date. Moreover, UO₂ exhibits excellent photocatalytic activity toward the oxidation of diphenylhydrazine to azobenzene with conversion and selectivity reaching ~100%, which represents a promising highly efficient 2D CN material. Regarding phenols degradation, UO₂ also displayed significantly higher activity and durability during the degradation of phenol when compared to traditional g-C₃N₄, highlighting its significant potential for application in energy, environment and photocatalytic organic reactions.

The Pivotal Role of Hot Carriers in Plasmonic Catalysis of C-N Bond Forming Reaction of Amines

Here, we demonstrate the simultaneous utilization of both the hot carriers (electrons and holes) in the photocatalytic transformation of benzylamine to N-benzylidenebenzylamine and the scope of reaction has also been successfully demonstrated with catalytic oxidation of 4-methoxybenzylamine. The wavelength-dependent excitation of AuNP allows us to tune the potential energy of charge carriers relative to the redox potential of the reactants which leads to energetically favorable product formation on the nanoparticle surface. We capture the formation of reaction intermediates and products by using in situ Raman spectroscopy, complemented by NMR spectroscopy and GC-MS. Based on the experimental substantiations, a plausible reaction mechanism has been proposed.

Can Plasmon Change Reaction Path? Decomposition of Unsymmetrical Iodonium Salts as an Organic Probe

Plasmon-assisted transformations of organic compounds represent a novel opportunity for conversion of light to chemical energy at room temperature. However, the mechanistic insights of interaction between plasmon energy and organic molecules is still under debate. Herein, we proposed a comprehensive study of the plasmon-assisted reaction mechanism using unsymmetric iodonium salts (ISs) as an organic probe. The experimental and theoretical analysis allow us to exclude the possible thermal effect or hot electron transfer. We found that plasmon interaction with unsymmetrical ISs led to the intramolecular excitation of electron followed by the regioselective cleavage of C-I bond with the formation of electron-rich radical species, which cannot be explained by the hot electron excitation or thermal effects. The high regioselectivity is explained by the direct excitation of electron to LUMO with the formation of a dissociative excited state according to quantum-chemical modeling, which provides novel opportunities for the fine control of reactivity using plasmon energy.

New Variants of Nitroxide Mediated Polymerization

Nitroxide-mediated polymerization is now a mature technique, at 35 years of age. During this time, several variants have been developed: enhanced spin capture polymerization (ESCP), photoNMP (NMP2), chemically initiated NMP (CI-NMP), spin label NMP (SL-NMP), and plasmon-initiated NMP (PI-NMP). This mini-review is devoted to the features and applications of these variants.

Critical Coupling of Visible Light Extends Hot-Electron Lifetimes for H2O2 Synthesis

Devices driven by above-equilibrium "hot" electrons are appealing for photocatalytic technologies, such as in situ H₂O₂ synthesis, but currently suffer from low (<1%) overall quantum efficiencies. Gold nanostructures excited by visible light generate hot electrons that can inject into a neighboring semiconductor to drive electrochemical reactions. Here, we designed and studied a metal-insulator-metal (MIM) structure of Au nanoparticles on a ZnO/TiO₂/Al film stack, deposited through room-temperature, lithography-free methods. Light absorption, electron injection efficiency, and photocatalytic yield in this device are superior in comparison to the same stack without Al. Our device absorbs >60% of light at the Au localized surface plasmon resonance (LSPR) peak near 530 nm-a 5-fold enhancement in Au absorption due to critical coupling to an Al film. Furthermore, we show through ultrafast pump-probe spectroscopy that the Al-coupled samples exhibit a nearly 5-fold improvement in hot-electron injection efficiency as compared to a non-Al device, with the hot-electron lifetimes extending to >2 ps in devices photoexcited with fluence of 0.1 mJ cm^-2. The use of an Al film also enhances the photocatalytic yield of H₂O₂ more than 3-fold in a visible-light-driven reactor. Altogether, we show that the critical coupling of Al films to Au nanoparticles is a low-cost, lithography-free method for improving visible-light capture, extending hot-carrier lifetimes, and ultimately increasing the rate of in situ H₂O₂ generation.

3D structured materials and devices for artificial photosynthesis

Artificial photosynthesis is an effective way to convert solar energy into fuels, which is of great significance to energy production and reduction of atmospheric CO₂ content. In recent years, 3D structured artificial photosynthetic system has made great progress as an effective design strategy. This review first highlights several typical mechanisms for improved artificial photosynthesis with 3D structures: improved light harvesting, mass transfer and charge separation. Then, we summarize typical examples of 3D structured artificial photosynthetic systems, including bioinspired structures, photonic crystals (PC), designed photonic structures (PC coupling structure, plasmon resonance structure, optical resonance structure, metamaterials), 3D-printed systems, nanowire integrated systems and hierarchical 3D structures. Finally, we discuss the problems and challenges to the application and development of 3D artificial photosynthetic system and the possible trends of future development. We hope this review can inspire more progress in the field of artificial photosynthesis.

Extending Absorption Edge through the Hybrid Resonator-Based Absorber with Wideband and Near-Perfect Absorption in Visible Region

Metamaterial absorber with the unexpected capability for harvesting electromagnetic energy has been regarded as a potential route for various applications, including chemical/biological sensing, cloaking and photovoltaic applications. In this study, we presented the simple absorber design made with Al/SiO₂/Al sandwich structures through the involvement of hybrid dual-resonators that could allow the wideband light absorption covered from 450 nm to 600 nm with average absorptivity above 95%. Examinations of excited electric field, magnetic field and total magnitude of electric field in three-dimensional space at resonances were performed to clarify the origin of resonant behaviors. In addition, an equivalent inductance-capacitance circuit model was proposed that could qualitatively explore the geometry-dependent absorption characteristics by modulating the constitutive parameters of hybrid resonators. As a result, the designed light absorber might enable to be practically applied for various optical-management and photovoltaic applications, and even offered the tunability for other desired frequency regions.

Efficient photocatalytic oxidative deamination of imine and amine to aldehyde over nitrogen-doped KTi3NbO9 under purple light

Nitrogen doped titanoniobate (N-KTi₃NbO₉) exhibits excellent performance in photocatalytic oxidative deamination of imine and amine to aldehyde.

Polyoxometalate-Supported Aminocatalyst for the Photocatalytic Direct Synthesis of Imines from Alkenes and Amines

Developing efficient photocatalysts for direct oxidative coupling of alkenes and amines with O₂ under mild conditions is very significant. Herein, ZnW-PYI is well-designed by assembling a [PZnW₁₁O₃₉(H₂O)]^5- photooxidation catalyst and chiral aminocatalyst pyrrolidine-2-ylimidazole (PYI) via a coordination model. ZnW-PYI efficiently catalyzed the synthesis of imines from alkenes and amines using O₂ as the oxidant through nucleophilic catalysis by employing pyrrolidine as an organocatalyst. Combining a polyoxometalate and PYI within one single framework is an effective approach not only for stabilization and heterogenization of the redox-active catalyst and aminocatalyst but also for realization of compatibility between the reaction intermediates and synergy of multiple catalytic cycles.