Bioinspired, Multidisciplinary, Iterative Catalyst Design Creates the Highest Performance Peroxidase Mimics and the Field of Sustainable Ultradilute Oxidation Catalysis (SUDOC)

Assessment of new hydrogen peroxide activators in water and comparison of their active species toward contaminants of emerging concern

Advanced oxidation processes are the most efficient tool to thwart the overaccumulation of harmful organic compounds in the environment. In this direction bioinspired metal complexes may be a viable solution for oxidative degradations in water. However, their synthesis is often elaborated and their scalability consequently low. This study presents alternative easy-to-synthesize bioinspired metal complexes to promote degradations in water. The metals employed were iron and manganese ions, hence cheap and highly accessible ions. The complexes were tested toward Phenol, Estrone, Triclosan, Oxybenzone, Diclofenac, Carbamazepine, Erythromycin, Aspartame, Acesulfame K, Anisole and 2,4-Dinitrotoluene. The reaction favoured electron-rich compounds reaching a removal efficiency of over 90%. The central ion plays a crucial role. Specifically, Mn(II) induces a non-radical pathway while iron ions a predominant radical one (⋅OH is predominant). The iron systems resulted more versatile toward contaminants, while the manganese ones showed a higher turn-over number, hence higher catalytic behaviour.

Effects of a TAML catalyst on mice exposed during pregnancy and lactation

Tetra-amido macrocyclic ligands (TAMLs) are catalysts designed to mimic endogenous peroxidases that can degrade pollutants. Before TAMLs gain widespread use, it is first important to determine if they have endocrine disrupting properties. In this study, we evaluated the effects of the iron TAML, NT7, on hormone-sensitive outcomes in mice exposed during pregnancy and lactation, and on their litters prior to weaning. We administered NT7 at one of three doses to mice via drinking water prior to and then throughout pregnancy and lactation. Two hormonally active pharmaceuticals, ethinyl estradiol (EE2) and flutamide (FLUT), a known estrogen receptor agonist and androgen receptor antagonist, respectively, were also included. In the females, we measured pre- and post-parturition weight, length of pregnancy, organ weights at necropsy, and morphology of the mammary gland at the end of the lactational period. We also quantified maternal behaviors at three stages of lactation. For the offspring, we measured litter size, litter weights, and the achievement of other developmental milestones. We observed only one statistically significant effect of NT7, a decrease in the percentage of pups with ear opening at postnatal day 5. This contrasts with the numerous effects of EE2 on both the mother and the litter, as well as several modest effects of FLUT. The approach taken in this study could provide guidance for future studies that aim to evaluate novel compounds for endocrine disrupting properties.

Effects of perinatal exposures to a TAML catalyst on the mammary gland and hormone-sensitive outcomes in male mice

Estrogenic chemicals are common pollutants in wastewater and current effluent treatment processes are not typically effective in removing these compounds. Tetra-amido macrocyclic ligands (TAMLs) are catalysts that mimic endogenous peroxidases that may provide a solution to remove environmental pollutants including low concentrations of estrogenic compounds. Yet relatively little is known about the toxicity of TAMLs, and few studies have evaluated whether they may have endocrine disrupting properties. We administered one of three doses of a TAML, NT7, to mice via drinking water throughout pregnancy and lactation. Two pharmacologically active compounds, ethinyl estradiol (EE2) and flutamide were also included to give comparator data for estrogen receptor agonist and androgen receptor antagonist activities. Male pups were evaluated for several outcomes at weaning, puberty, and early adulthood. We found that EE2 exposures during gestation and the perinatal period induced numerous effects that were observed across the three ages including changes to spleen and testis weight and drastic effects on the morphology of the mammary gland. Flutamide had fewer effects but altered anogenital distance at weaning as well as spleen, liver, and kidney weight. In contrast, relatively few effects of NT7 were observed, but included alterations to spleen weight and modest changes to adult testis weight and morphology of the mammary gland at weaning. Collectively, these results provide some of the first evidence suggesting that NT7 may alter some hormone-sensitive outcomes, but that the effects were distinct from either EE2 or flutamide. Additional studies are needed to characterize the biological activity of this and other TAML catalysts.

Sulfonamido-Pincer Complexes of Cu(II) and the Electrocatalysis of O2 Reduction

Heteroleptic copper complexes of an asymmetrical pincer ligand containing a central anionic sulfonamide donor (pyridine-2-yl-sulfonyl)(quinolin-8-yl)-amide (psq), which contains a central anionic sulfonamido donor have been prepared. Meridional κ3-N,N″,N‴ binding with the co-ligands acetate, chloride, or acetonitrile (MeCN), trans to the central sulfonamido N-donor, is revealed by the X-ray crystal structures of [Cu(OAc)(psq)(H2O)], [CuCl(psq)]2, and [Cu(psq)(MeCN)](PF6). Either overall distorted square pyramidal or octahedral geometries of the copper atom are satisfied by coordinated water in the case of the acetate complex or interactions with periphery sulfonamido oxygen atoms on adjacent molecules in the dimeric chloride and 1D polymeric acetonitrile complexes. The cyclic voltammogram (CV) of [Cu(OAc)(psq)(H2O)] shows a quasi-reversible CuII/CuI reduction at -0.930 V (vs Fc+/Fc0, MeCN), and an irreversible CuII/CuI reduction for [Cu(psq)(MeCN)](PF6) is seen at -0.838 V. This signal is split into two quasi-reversible redox processes on the addition of 2,2,2-trifluoroethanol (TFE). This suggests that TFE pushes a solution equilibrium toward a dimeric acetate complex analogous to [CuCl(psq)]2, which shows two quasi-reversible waves at -0.666 V and -0.904 V vs Fc+/Fc0 consistent with its dimeric solid-state structure. A comparison of the CVs of [Cu(OAc)(psq)(H2O)] under either a N2 or an O2 atmosphere revealed that this complex catalyzes turnover electro-reduction of O2 to H2O2 and H2O. The rate of reaction increases on addition of a weak organic acid, and a coulombic efficiency of 48% for H2O2 was determined by iodometric titration. We propose that a CuI complex formed on electroreduction binds O2 to yield an intermediate superoxide complex. On electron and proton transfer to this species, a bifurcated route back to the O2-activating CuI complex is feasible with either release of H2O2 or O-O cleavage resulting in the liberation of H2O. The CuI complex is regenerated by subsequent reduction and protonation to close the cycle.

The Mechanism of Formation of Active Fe-TAMLs Using HClO Enlightens Design for Maximizing Catalytic Activity at Environmentally Optimal, Circumneutral pH

Fe-TAML/peroxide catalysis provides simple, powerful, ultradilute approaches for removing micropollutants from water. The typically rate-determining interactions of H₂O₂ with Fe-TAMLs (rate constant k_I) are sharply pH-sensitive with rate maxima in the pH 9-10 window. Fe-TAML design or process design that shifts the maximum rates to the pH 6-8 window of most wastewaters would make micropollutant eliminations even more powerful. Here, we show how the different pH dependencies of the interactions of Fe-TAMLs with peroxide or hypochlorite to form active Fe-TAMLs (k_I step) illuminate why moving from H₂O₂ (pK_a, ca. 11.6) to hypochlorite (pK_a, 7.5) shifts the pH of the fastest catalysis to as low as 8.2. At pH 7, hypochlorite catalysis is 100-1000 times faster than H₂O₂ catalysis. The pH of maximum catalytic activity is also moderated by the pK_a's of the Fe-TAML axial water ligands, 8.8, 9.3, and 10.3, respectively, for [Fe{4-NO₂C₆H₃-1,2-(NCOCMe₂NSO₂)₂CHMe}(H₂O)_n]^- (2) [n = 1-2], [Fe{4-NO₂C₆H₃-1,2-(NCOCMe₂NCO)₂CF₂}(H₂O)_n]^- (1b), and [Fe{C₆H₄-1,2-(NCOCMe₂NCO)₂CMe₂}(H₂O)_n]^- (1a). The new bis(sulfonamido)-bis(carbonamido)-ligated 2 exhibits the lowest pK_a and delivers the largest hypochlorite over peroxide catalytic rate advantage. The fast Fe-TAML/hypochlorite catalysis is accompanied by slow noncatalytic oxidations of Orange II.

On TAML Catalyst Resting State Lifetimes: Kinetic, Mechanistic, and Theoretical Insight into Phosphate-Induced Demetalation of an Iron(III) Bis(sulfonamido)bis(amido)-TAML Catalyst

At ambient temperatures, neutral pH and ultralow concentrations (low nM), the bis(sulfonamido)bis(amido) oxidation catalyst [Fe{4-NO₂C₆H₃-1,2-(NCOCMe₂NSO₂)₂CHMe}(OH₂)]^- (1) has been shown to catalyze the addition of an oxygen atom to microcystin-LR. This persistent bacterial toxin can contaminate surface waters and render drinking water sources unusable when nutrient concentrations favor cyanobacterial blooms. In mechanistic studies of this oxidation, while the pH was controlled with phosphate buffers, it became apparent that iron ejection from 1 becomes increasingly problematic with increasing [phosphate] (0.3-1.0 M); 1 is not noticeably impacted at low concentrations (0.01 M). At pH < 6.5 and [phosphate] ≥ 1.0 M, 1 decays quickly, losing iron from the macrocycle. Iron ejection is surprisingly mechanistically complex; the pseudo-first-order rate constant k_obs has an unusual dependence on the total phosphate concentration ([P_t]), k_obs = k₁[P_t] + k₂[P_t]², indicating two parallel pathways that are first and second order in [phosphate], respectively. The pH profiles in the 5.5-8.3 range for k₁ and k₂ are different: bell-shaped with a maximum of around pH 7 for k₁ and sigmoidal for k₂ with higher values at lower pH. Mechanistic proposals for the k₁ and k₂ pathways are detailed based on both the kinetic data and density functional theory analysis. The major difference between k₁ and k₂ is the involvement of different phosphate species, i.e., HPO₄^2- (k₁) and H₂PO₄^- (k₂); HPO₄^2- is less acidic but more nucleophilic, which favors intramolecular rate-limiting Fe-N bond cleavage. Instead, H₂PO₄^- acts intermolecularly, where the kinetics suggest that [H₄P₂O₈]^2- drives degradation.

Effect of Brшnsted Acid on the Reactivity and Selectivity of the Oxoiron(V) Intermediates in C-H and C=C Oxidation Reactions

The effect of HClO4 on the reactivity and selectivity of the catalyst systems 1,2/H2O2/AcOH, based on nonheme iron complexes of the PDP families, [(Me2OMePDP)FeIII(μ-OH)2FeIII(MeOMe2PDP)](OTf)4 (1) and [(NMe2PDP)FeIII(μ-OH)2FeIII(NMe2PDP](OTf)4 (2), toward oxidation of benzylideneacetone (bna), adamantane (ada), and (3aR)-(+)-sclareolide (S) has been studied. Adding HClO4 (2–10 equiv. vs. Fe) has been found to result in the simultaneous improvement of the observed catalytic efficiency (i.e., product yields) and the oxidation regio- or enantioselectivity. At the same time, HClO4 causes a threefold increase of the second-order rate constant for the reaction of the key oxygen-transferring intermediate [(Me2OMePDP)FeV=O(OAc)]2+ (1a), with cyclohexane at −70 °C. The effect of strong Brønsted acid on the catalytic reactivity is discussed in terms of the reversible protonation of the Fe=O moiety of the parent perferryl intermediates.

Reactive High-Valent Iron Intermediates in Enhancing Treatment of Water by Ferrate

Efforts are being made to tune the reactivity of the tetraoxy anion of iron in the +6 oxidation state (Fe^VIO₄^2-), commonly called ferrate, to further enhance its applications in various environmental fields. This review critically examines the strategies to generate highly reactive high-valent iron intermediates, Fe^VO₄^3- (Fe^V) and Fe^IVO₄^4- or Fe^IVO₃^2- (Fe^IV) species, from Fe^VIO₄^2-, for the treatment of polluted water with greater efficiency. Approaches to produce Fe^V and Fe^IV species from Fe^VIO₄^2- include additions of acid (e.g., HCl), metal ions (e.g., Fe(III)), and reductants (R). Details on applying various inorganic reductants (R) to generate Fe^V and Fe^IV from Fe^VIO₄^2- via initial single electron-transfer (SET) and oxygen-atom transfer (OAT) to oxidize recalcitrant pollutants are presented. The common constituents of urine (e.g., carbonate, ammonia, and creatinine) and different solids (e.g., silica and hydrochar) were found to accelerate the oxidation of pharmaceuticals by Fe^VIO₄^2-, with potential mechanisms provided. The challenges of providing direct evidence of the formation of Fe^V/Fe^IV species are discussed. Kinetic modeling and density functional theory (DFT) calculations provide opportunities to distinguish between the two intermediates (i.e., Fe^IV and Fe^V) in order to enhance oxidation reactions utilizing Fe^VIO₄^2-. Further mechanistic elucidation of activated ferrate systems is vital to achieve high efficiency in oxidizing emerging pollutants in various aqueous streams.

Bioimaging agents based on redox-active transition metal complexes

Detecting the fluctuation and distribution of various bioactive species in biological systems is of great importance in determining diseases at their early stages. Metal complex-based probes have attracted considerable attention in bioimaging applications owing to their unique advantages, such as high luminescence, good photostability, large Stokes shifts, low toxicity, and good biocompatibility. In this review, we summarized the development of redox-active transition metal complex-based probes in recent five years with the metal ions of iron, manganese, and copper, which play essential roles in life and can avoid the introduction of exogenous metals into biological systems. The designing principles that afford these complexes with optical or magnetic resonance (MR) imaging properties are elucidated. The applications of the complexes for bioimaging applications of different bioactive species are demonstrated. The current challenges and potential future directions of these probes for applications in biological systems are also discussed.

This review summarizes transition metal complexes as bioimaging agents in optical and magnetic resonance imaging.

Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and provide an outlook for prioritizing strategic research directions.

Enhanced Treatment of Municipal Wastewater Effluents by Fe-TAML/H2O2: Efficiency of Micropollutant Abatement

Combining iron with a tetraamido-macrocyclic ligand (Fe-TAML) as a catalyst and with hydrogen peroxide (H₂O₂) as the bulk oxidant is a process that has been suggested for the oxidative abatement of micropollutants during water treatment. In this study, the reactivity of the Fe-TAML/H₂O₂ system was evaluated by investigating the degradation of a group of electron-rich organic model compounds with different functional groups in a secondary wastewater effluent. Phenolic compounds and a polyaromatic ether are quickly and substantially abated by Fe-TAML/H₂O₂ in a wastewater effluent. For tertiary amines, a moderate rate of abatement was observed. Primary and secondary amines, aromatic ethers, aromatic aldehydes, and olefins are oxidized too slowly in the investigated Fe-TAML/H₂O₂ systems to be significantly abated in a secondary wastewater effluent. Trichlorophenol is readily oxidized to chloromaleic acid and chlorofumaric acid, which support a one-electron transfer reaction as the initial step of the reaction between Fe-TAML/H₂O₂ and the target compound. Fe-TAML/H₂O₂ does not oxidize bromide to hypobromous acid; however, iodide is oxidized to hypoiodous acid, and as a consequence, the H₂O₂ consumption is accelerated by a catalytic reaction in iodide-containing water. Overall, Fe-TAML/H₂O₂ is a rather selective oxidant, which makes it an interesting system for the abatement of electron-rich phenolic-type pollutants.

Basic ionic liquids for catalysis: the road to greater stability

Homogeneous and heterogenized basic ionic liquids as reaction catalysts have been highlighted, particularly where they are used to promote reactions that could form the basis of more sustainable energy and chemical production.

EPR spectroscopy elucidates the electronic structure of [FeV(O)(TAML)] complexes

The complete hyperfine tensor of ¹⁷O of the Fe^V-oxo moeity was probed by ENDOR spectroscopy. The EPR spectroscopic results reported here provide a conclusive experimental basis for elucidating the electronic structure of the Fe^V-oxo complex.

Quantifying evolving toxicity in the TAML/peroxide mineralization of propranolol

Oxidative water purification of micropollutants (MPs) can proceed via toxic intermediates calling for procedures for connecting degrading chemical mixtures to evolving toxicity. Herein, we introduce a method for projecting evolving toxicity onto composite changing pollutant and intermediate concentrations illustrated through the TAML/H₂O₂ mineralization of the common drug and MP, propranolol. The approach consists of identifying the key intermediates along the decomposition pathway (UPLC/GCMS/NMR/UV-Vis), determining for each by simulation and experiment the rate constants for both catalytic and noncatalytic oxidations and converting the resulting predicted concentration versus time profiles to evolving composite toxicity exemplified using zebrafish lethality data. For propranolol, toxicity grows substantially from the outset, even after propranolol is undetectable, echoing that intermediate chemical and toxicity behaviors are key elements of the environmental safety of MP degradation processes. As TAML/H₂O₂ mimics mechanistically the main steps of peroxidase catalytic cycles, the findings may be relevant to propranolol degradation in environmental waters.

Designing Materials for Aqueous Catalysis: Ionic Liquid Gel and Silica Sphere Entrapped Iron-TAML Catalysts for Oxidative Degradation of Dyes

Materials have been developed that encapsulate a homogeneous catalyst and enable it to operate as a heterogeneous catalyst in water. A hydrophobic ionic liquid within the material was used to dissolve Fe-TAML and keep it from leaching into the aqueous phase. One-pot processes were used to entrap Fe-TAML in basic ionic liquid gels, and ionic liquid gel spheres structured via a modified Stöber synthesis forming SiO₂ particles of uniform size. Catalytic activity was demonstrated via the oxidative degradation of dyes. Fe-TAML entrapped in a basic ionic liquid gel exhibited consistent activity in five recycles. This discovery of heterogenized H₂O₂ activators prepared by sol-gel and Stöber processes opens new possibilities for the creation of engineered catalytic materials for water purification.

Enhanced Redox Reactivity of a Nonheme Iron(V)-Oxo Complex Binding Proton

Acid effects on the chemical properties of metal-oxygen intermediates have attracted much attention recently, such as the enhanced reactivity of high-valent metal(IV)-oxo species by binding proton(s) or Lewis acidic metal ion(s) in redox reactions. Herein, we report for the first time the proton effects of an iron(V)-oxo complex bearing a negatively charged tetraamido macrocyclic ligand (TAML) in oxygen atom transfer (OAT) and electron-transfer (ET) reactions. First, we synthesized and characterized a mononuclear nonheme Fe(V)-oxo TAML complex (1) and its protonated iron(V)-oxo complexes binding two and three protons, which are denoted as 2 and 3, respectively. The protons were found to bind to the TAML ligand of the Fe(V)-oxo species based on spectroscopic characterization, such as resonance Raman, extended X-ray absorption fine structure (EXAFS), and electron paramagnetic resonance (EPR) measurements, along with density functional theory (DFT) calculations. The two-protons binding constant of 1 to produce 2 and the third protonation constant of 2 to produce 3 were determined to be 8.0(7) × 10⁸ M^-2 and 10(1) M^-1, respectively. The reactivities of the proton-bound iron(V)-oxo complexes were investigated in OAT and ET reactions, showing a dramatic increase in the rate of sulfoxidation of thioanisole derivatives, such as 10⁷ times increase in reactivity when the oxidation of p-CN-thioanisole by 1 was performed in the presence of HOTf (i.e., 200 mM). The one-electron reduction potential of 2 (E_red vs SCE = 0.97 V) was significantly shifted to the positive direction, compared to that of 1 (E_red vs SCE = 0.33 V). Upon further addition of a proton to a solution of 2, a more positive shift of the E_red value was observed with a slope of 47 mV/log([HOTf]). The sulfoxidation of thioanisole derivatives by 2 was shown to proceed via ET from thioanisoles to 2 or direct OAT from 2 to thioanisoles, depending on the ET driving force.

Zero-Order Catalysis in TAML-Catalyzed Oxidation of Imidacloprid, a Neonicotinoid Pesticide

Bis-sulfonamide bis-amide TAML activator [Fe{4-NO₂ C₆ H₃ -1,2-(NCOCMe₂ NSO₂ )₂ CHMe}]^- (2) catalyzes oxidative degradation of the oxidation-resistant neonicotinoid insecticide, imidacloprid (IMI), by H₂ O₂ at pH 7 and 25 °C, whereas the tetrakis-amide TAML [Fe{4-NO₂ C₆ H₃ -1,2-(NCOCMe₂ NCO)₂ CF₂ }]^- (1), previously regarded as the most catalytically active TAML, is inactive under the same conditions. At ultra-low concentrations of both imidacloprid and 2, 62 % of the insecticide was oxidized in 2 h, at which time the catalyst is inactivated; oxidation resumes on addition of a succeeding aliquot of 2. Acetate and oxamate were detected by ion chromatography, suggesting deep oxidation of imidacloprid. Explored at concentrations [2]≥[IMI], the reaction kinetics revealed unusually low kinetic order in 2 (0.164±0.006), which is observed alongside the first order in imidacloprid and an ascending hyperbolic dependence in [H₂ O₂ ]. Actual independence of the reaction rate on the catalyst concentration is accounted for in terms of a reversible noncovalent binding between a substrate and a catalyst, which usually results in substrate inhibition when [catalyst]≪[substrate] but explains the zero order in the catalyst when [2]>[IMI]. A plausible mechanism of the TAML-catalyzed oxidations of imidacloprid is briefly discussed. Similar zero-order catalysis is presented for the oxidation of 3-methyl-4-nitrophenol by H₂ O₂ , catalyzed by the TAML analogue of 1 without a NO₂ -group in the aromatic ring.

Oxidative Catalysis by TAMLs: Obtaining Rate Constants for Non-Absorbing Targets by UV-Vis Spectroscopy

Understanding the catalysis of oxidative reactions by TAML activators of peroxides, i. e. iron(III) complexes of tetraamide macrocyclic ligands, advocated a spectrophotometric procedure for quantifying the catalytic activity of TAMLs for colorless targets (k_II ', M^-1  s^-1 ), which is incomparably more advantageous in terms of time, cost, energy, and ecology than NMR, HPLC, UPLC, GC-MS and other similar techniques. Dyes Orange II or Safranin O (S) are catalytically bleached by non-excessive amount of H₂ O₂ in the presence of colorless substrates (S₁ ) according to the rate law: -d[S]/dt=k_I k_II [H₂ O₂ ][S][TAML]/(k_I [H₂ O₂ ]+k_II [S]+k_II '[S₁ ]). The bleaching rate is thus a descending hyperbolic function of S₁  : v=ab/(b+[S₁ ]). Values of k_II ' found from a and b for phenol and propranolol with commonly used TAML [Fe^III {o,o'-C₆ H₄ (NCONMe₂ CO)₂ CMe₂ }₂ (OH₂ )]⁺ are consistent with those for S₁ (phenol, propranolol) obtained directly by UPLC. The study sends vital messages to enzymologists and environmentalists.