In Situ Preparation of Ru@N-Doped Carbon Catalyst for the Hydrogenolysis of Lignin To Produce Aromatic Monomers

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Bio-oil derived from biomass fast pyrolysis can be upgraded to gasoline and diesel alternatives by catalytic hydrodeoxygenation (HDO). Here, the novel nitrogen-doped carbon-alumina hybrid supported cobalt (Co/NCAn, n = 1, 2.5, 5) catalyst is established by a coagulation bath technique. The optimized Co/NCA2.5 catalyst presented 100 % conversion of guaiacol, high selectivity to cyclohexane (93.6 %), and extremely high deoxygenation degree (97.3 %), respectively. Therein, the formation of cyclohexanol was facilitated by stronger binding energy and greater charge transfer between Co and NC which was unraveled by density functional theory calculations. In addition, the appropriate amount of Lewis acid sites enhanced the cleavage of the C-O bond in cyclohexanol, finally resulting in a remarkable selectivity for cyclohexane. Finally, the Co/NCA2.5 catalyst also exhibited excellent selectivity (93.1 %) for high heating value hydrocarbon fuel in crude bio-oil HDO. This work provides a theoretical basis on N dopants collaborating alumina hybrid catalysts for efficient HDO reaction.

Hierarchical porous carbon materials for lithium storage: preparation, modification, and applications

Secondary battery as an efficient energy conversion device has been highly attractive for alleviating the energy crisis and environmental pollution. Hierarchical porous carbon (HPC) materials with multiple sizes pore channels are considered as promising materials for energy conversion and storage applications, due to their high specific surface area and excellent electrical conductivity. Although many reviews have reported on carbon materials for different fields, systematic summaries about HPC materials for lithium storage are still rare. In this review, we first summarize the main preparation methods of HPC materials, including hard template method, soft template method, and template-free method. The modification methods including porosity and morphology tuning, heteroatom doping, and multiphase composites are introduced systematically. Then, the recent advances in HPC materials on lithium storage are summarized. Finally, we outline the challenges and future perspectives for the application of HPC materials in lithium storage.

Advances in Heterogeneous Catalysts for Lignin Hydrogenolysis

Lignin is the main component of lignocellulose and the largest source of aromatic substances on the earth. Biofuel and bio-chemicals derived from lignin can reduce the use of petroleum products. Current advances in lignin catalysis conversion have facilitated many of progress, but understanding the principles of catalyst design is critical to moving the field forward. In this review, the factors affecting the catalysts (including the type of active metal, metal particle size, acidity, pore size, the nature of the oxide supports, and the synergistic effect of the metals) are systematically reviewed based on the three most commonly used supports (carbon, oxides, and zeolites) in lignin hydrogenolysis. The catalytic performance (selectivity and yield of products) is evaluated, and the emerging catalytic mechanisms are introduced to better understand the catalyst design guidelines. Finally, based on the progress of existing studies, future directions for catalyst design in the field of lignin depolymerization are proposed.

Pd-Based Nano-Catalysts Promote Biomass Lignin Conversion into Value-Added Chemicals

Lignin, as a structurally complex biomaterial, offers a valuable resource for the production of aromatic chemicals; however, its selective conversion into desired products remains a challenging task. In this study, we prepared three types of Pd-based nano-catalysts and explored their application in the depolymerization of alkali lignin, under both H₂-free (hydrogen transfer) conditions and H₂ atmosphere conditions. The materials were well characterized with TEM, XRD, and XPS and others, and the electronic interactions among Pd, Ni, and P were analyzed. The results of lignin depolymerization experiments revealed that the ternary Pd-Ni-P catalyst exhibited remarkable performance and guaiacols could be produced under H₂ atmosphere conditions in 14.2 wt.% yield with a selectivity of 89%. In contrast, Pd-Ni and Pd-P catalysts resulted in a dispersed product distribution. Considering the incorporation of P and the Pd-Ni synergistic effect in the Pd-Ni-P catalyst, a possible water-involved transformation route of lignin depolymerization was proposed. This work indicates that metal phosphides could be promising catalysts for the conversion of lignin and lignin-derived feedstocks into value-added chemicals.

Preparation of Ru/N-doped carbon catalysts by induction of different nitrogen source precursors for the hydroprocessing of lignin oil

The lignin oil produced by rapid pyrolysis of lignin is considered a promising liquid fuel source. Hydrodeoxygenation (HDO) is a kind of efficient method to upgrade the lignin oil, and a high-performance catalyst is key to the hydrodeoxygenation of lignin oil. In this study, a high dispersion and small size Ru nanoparticle loaded N-doped carbon catalyst was derived by the direct pyrolysis of a mixture of ruthenium trichloride and melamine, and it could efficiently convert lignin oil. The lignin oil was completely transformed at 240 °C and 1 MPa H₂, and 36.58% cyclohexane was obtained. The formation, surface area, and nitrogen species of the catalyst could be controlled by changing the precursor of the nitrogen-doped carbon support. The percentage of pyridine nitrogen possessed with melamine as a nitrogen-carbon precursor (31.35%) was much higher than that with urea (16.47%) and dicyandiamide (8.20%) as nitrogen-carbon precursors. The presence of pyridine nitrogen could not only serve as the coordination site for even dispersity and stability of Ru nanoparticles but also regulated the electron density of Ru nanoparticles (NPs) and increased the active site Ru⁰ through electron transfer.

Unraveling the Lignin Structural Variation in Different Bamboo Species

The structure of cellulolytic enzyme lignin (CEL) prepared from three bamboo species (Neosinocalamus affinis, Bambusa lapidea, and Dendrocalamus brandisii) has been characterized by different analytical methods. The chemical composition analysis revealed a higher lignin content, up to 32.6% of B. lapidea as compared to that of N. affinis (20.7%) and D. brandisii (23.8%). The results indicated that bamboo lignin was a p-hydroxyphenyl-guaiacyl-syringyl (H-G-S) lignin associated with p-coumarates and ferulates. Advanced NMR analyses displayed that the isolated CELs were extensively acylated at the γ-carbon of the lignin side chain (with either acetate and/or p-coumarate groups). Moreover, a predominance of S over G lignin moieties was found in CELs of N. affinis and B. lapidea, with the lowest S/G ratio observed in D. brandisii lignin. Catalytic hydrogenolysis of lignin demonstrated that 4-propyl-substituted syringol/guaiacol and propanol guaiacol/syringol derived from β-O-4' moieties, and methyl coumarate/ferulate derived from hydroxycinnamic units were identified as the six major monomeric products. We anticipate that the insights of this work could shed light on the sufficient understanding of lignin, which could open a new avenue to facilitate the efficient utilization of bamboo.

Lignin-coordinated highly dispersed PdZn alloy nanocluster supported on N-doped nanolayer carbon and its application in hexavalent chromium detoxification

As a renewable and low-cost biomacromolecule with high aromaticity and carbon content, lignin is a promising raw material for preparation of versatile carbon materials. Herein, we present a facile one-pot approach to prepare PdZn alloy nanocluster catalysts supported on N-doped lignin-derived nanolayer carbon through facile pyrolysis of melamine-mixed lignin-Pd-Zn complex. The dispersion of the PdZn alloy nanoclusters could be effectively modulated by varying the addition of melamine and the molar ratio of Pd and Zn salts. PdZn alloy nanocluster catalysts (Pd-Zn₂₉@N₁₀C) with ultra-small particle size (about 0.47 nm) were prepared when 10 times of melamine (relative to lignin weight) was added and the molar ratio of Pd and Zn salts was 1:29. Thereby, the catalyst presented superior catalytic activity for reduction of Cr(VI) to harmfulless Cr(III), significantly better than the two references Zn@N₁₀C (without Pd addition) and Pd-Zn₂₉@C (without N doping), as well as the commercial Pd/C. In addition, thanks to the strong anchoring of the PdZn alloy on the N-doped nanolayer support, the Pd-Zn₂₉@N₁₀C catalysts also exhibited good reusability. Consequently, the current study provides a straightforward and feasible method for producing highly dispersed PdZn alloy nanoclusters by lignin coordination, and further demonstrates its excellent applicability in hexavalent chromium reduction.

Switching Amine Oxidation from Imines to Nitriles by Carbon-Hydrogen Bond Activation via Strong Base Modified Strategy

Precisely controlling the product selectivity from the complex reaction is always an attractive topic in the catalysis field. In this paper, the Ru/strong base junction formed by the redox strategy was demonstrated as an efficient catalyst to switch the selectivity in aerobic oxidation of benzylamines. The zirconia-supported ruthenium (Ru-ZrO₂) catalyst could catalyze benzylamine oxidation coupling to imines; however, the potassium oxide strong base modified zirconia-supported ruthenium (Ru-K-ZrO₂) catalyst could catalyze benzylamine oxidation dehydrogenation to nitriles. Insight into the mechanism showed that the base modified catalyst had excellent dehydrogenation ability which was assisted by the C-H bond activation and changed the reaction pathway. The strong base modified strategy may provide a new approach for controlling the performance of heterogeneous catalysts and product selectivity.

Highly selective hydrogenation of dimethyl oxalate to methyl glycolate and ethylene glycol over an amino-assisted Ru-based catalyst

A Ru/NH₂-MCM-41 catalyst was prepared via a coordination-assisted strategy for chemoselective hydrogenation of dimethyl oxalate with a high selectivity of methyl glycolate (ca. 100%) and ethylene glycol (>90%) at reaction temperatures of 343 K and 433 K, respectively. The amino groups help to anchor and form stable electron-rich Ru active sites, which accounts for the excellent CO bond activation and hydrogenation selectivity.

Lignin-First Depolymerization of Lignocellulose into Monophenols over Carbon Nanotube-Supported Ruthenium: Impact of Lignin Sources

Lignin-first depolymerization of lignocellulosic biomass into aromatics is of great significance to sustainable biorefinery. However, it remains a challenge, owing to the variance between lignin sources and structures. In this study, ruthenium supported on carbon nanotubes (Ru/CNT) exhibits efficient catalytic activity toward lignin hydrogenolysis to exclusively afford monophenols in high yields. Catalytic tests indicate that the yields of aromatic monomers are related to lignin sources and decrease in the order: hardwoods > herbaceous plants > softwoods. Experimental results demonstrate that the scission of C-O bonds and the high selectivity to monomeric aromatic compounds over the Ru/CNT catalyst are enhanced by avoiding side condensation. Furthermore, the fabricated Ru/CNT shows good reusability and recyclability, applicability, and biomass feedstock compatibility, rendering it a promising candidate for lignin valorization. These findings pave the way for rational design of highly active and stable catalysts to potentially address challenges in lignin chemistry.

Carbon-Based Nanocatalysts (CnCs) for Biomass Valorization and Hazardous Organics Remediation

The continuous increase of the demand in merchandise and fuels augments the need of modern approaches for the mass-production of renewable chemicals derived from abundant feedstocks, like biomass, as well as for the water and soil remediation pollution resulting from the anthropogenic discharge of organic compounds. Towards these directions and within the concept of circular (bio)economy, the development of efficient and sustainable catalytic processes is of paramount importance. Within this context, the design of novel catalysts play a key role, with carbon-based nanocatalysts (CnCs) representing one of the most promising class of materials. In this review, a wide range of CnCs utilized for biomass valorization towards valuable chemicals production, and for environmental remediation applications are summarized and discussed. Emphasis is given in particular on the catalytic production of 5-hydroxymethylfurfural (5-HMF) from cellulose or starch-rich food waste, the hydrogenolysis of lignin towards high bio-oil yields enriched predominately in alkyl and oxygenated phenolic monomers, the photocatalytic, sonocatalytic or sonophotocatalytic selective partial oxidation of 5-HMF to 2,5-diformylfuran (DFF) and the decomposition of organic pollutants in aqueous matrixes. The carbonaceous materials were utilized as stand-alone catalysts or as supports of (nano)metals are various types of activated micro/mesoporous carbons, graphene/graphite and the chemically modified counterparts like graphite oxide and reduced graphite oxide, carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and fullerenes.

Ni12P5/P-N-C Derived from Natural Single-Celled Chlorella for Catalytic Depolymerization of Lignin into Monophenols

Lignin is exceptionally abundant in nature and is regarded as a renewable, cheap, and environmentally friendly resource for the manufacture of aromatic chemicals. A novel Ni₁₂P₅/P-N-C catalyst for catalytic hydrogenolysis of lignin was synthesized. The catalysts were prepared by simple impregnation and carbonization using the nonprecious metal Ni taken up by the cell wall of Chlorella in Ni(NO₃)₂ solution. There were only two steps in this process, making the whole process very simple, efficient, and economical. Ni₁₂P₅ was uniformly distributed in the catalyst. During the hydrogenolysis of lignin, after 4 h reaction at 270 °C, the yield of bio-oil reached 65.26%, the yield of monomer reached 9.60%, and the selectivity to alkylphenol reached 76.15%. The mixed solvent of ethanol/isopropanol (1:1, v/v) is used as the solvent for the hydrogenolysis of lignin, which not only had excellent hydrogen transferability but also improved the yield of bio-oil, inhibiting the generation of char. No external hydrogen was used, thus avoiding safety issues in hydrogen transport and storage.

Review on the preparation of fuels and chemicals based on lignin

Lignin is by far the most abundant natural renewable aromatic polymer in nature, and its reserves are second only to cellulose. In addition to the rich carbon content, the structure of lignin contains functional groups such as benzene rings, methoxyl groups, and phenolic hydroxyl groups. Lignin degradation has become one of the high value, high quality and high efficiency methods to convert lignin, which is of great significance to alleviating the current energy shortage and environmental crisis. This article introduces the hydrolysis methods of lignin in acidic, alkaline, ionic liquids and supercritical fluids, reviews the heating rate, the source of lignin species and the effects of heating rate on the pyrolysis of lignin, and briefly describes the metal catalysis, oxidation methods such as electrochemical degradation and photocatalytic oxidation, and degradation reduction methods using hydrogen and hydrogen supply reagents. The lignin degradation methods for the preparation of fuels and chemicals are systematically summarized. The advantages and disadvantages of different methods, the selectivity under different conditions and the degradation efficiency of different catalytic combination systems are compared. In this paper, a new approach to improve the degradation efficiency is envisioned in order to contribute to the efficient utilization and high value conversion of lignin.

Recent advances of lignin valorization techniques toward sustainable aromatics and potential benchmarks to fossil refinery products

Aromatic compounds are important fuels and key chemical precursors for organic synthesis, however the current aromatics market are mainly relying on fossil resources which will eventually contribute to carbon emissions. Lignin has been recognized as a drop-in substitution to conventional aromatics, with its values gradually realized after tremendous research efforts in the recent five years. To facilitate the development of a possible lignin economics, this study overviewed the recent advances of various biorefinery techniques and the remaining challenging for lignin valorization. Starting with recent discovery of unexplored lignin structures, the potential functions of lignin related chemical structures were emphasized. The important breakthrough of lignin-first pretreatment, catalytic lignin depolymerization, and the high value products with possible benchmark with modern aromatics were reviewed with possible future targets. Possible retrofit of conventional petroleum refinery for lignin products were also introduced and hopefully paving a way to progressively migrate the industry towards carbon neutrality.

Hierarchical Co@C-N synthesized by the confined pyrolysis of ionic liquid@metal–organic frameworks for the aerobic oxidation of alcohols

Co@C-N with hierarchical pores and highly active sites is synthesized by the pyrolysis of an ionic liquid@metal–organic framework.

MOF-derived Ru@ZIF-8 catalyst with the extremely low metal Ru loading for selective hydrogenolysis of C–O bonds in lignin model compounds under mild conditions

A MOF-derived Ru@ZIF-8 catalyst with extremely low Ru loading effectively cleaved the C–O bonds of lignin model compounds under mild conditions.

Production of liquid fuels from Kraft lignin over bimetallic Ni-Mo supported on ZIF-derived porous carbon catalyst

Non-noble bimetallic NiMo supported on zeolitic imidazolate framework-derived porous carbon (NiMo@FDC) catalyst for lignin depolymerization has been successfully developed. The synergism between Ni and Mo species in NiMo@FDC catalyst could promote the catalytic cleavage of C–O linkages in Kraft lignin. At a low reaction temperature of 240 °C and under 4 MPa H₂, the lignin liquefaction yield was 98.85 wt% and minimum coke yield was 1 wt%, particularly when using 10%NiMo@FDC catalyst. Additionally, at a high reaction temperature of 300 °C and under 2 MPa H₂, there was an overall yield of 86 wt% of liquid product and 42 wt% of petroleum ether soluble product. The higher heating value (HHV) increased from 27.65 MJ kg⁻¹ to 34.11 MJ kg⁻¹. In the cycling experiment, the bifunctional catalyst also demonstrated reversability and stability. The synergy of Ni hydrogenation sites and Mo coupled adsorption sites identified a possible mechanism path, which could offer considerable potential for lignin depolymerization.

The structure and synergy of NiMo@FDC catalyst have a significant effect on realizing the production of lignin-derived liquid fuels from Kraft lignin.

Single-Atom Ruthenium Catalytic Sites for Acetylene Hydrochlorination

The high cost of noble metal catalysts has been a major factor limiting their industrial applications. It is thus of strong interest to develop catalysts with minimum metal loading. Here, we designed and prepared a single-atom ruthenium catalyst through a cascade anchoring strategy to maximize the efficiency of Ru atoms for acetylene hydrochlorination. The single-atom catalyst supported on commercial activated carbon (AC) exhibits excellent catalytic activity with acetylene conversion of 95.4% at an acetylene gas hourly space velocity (GHSV) of 720 h^-1 and almost no deactivation during a 600 h catalyst lifetime test. In conjunction with a series of experimental characterizations of the catalyst, including aberration-corrected scanning transmission electron microscopy (Ac-STEM), X-ray photoelectron spectroscopy (XPS), and extended X-ray absorption fine spectroscopy (EXAFS), density functional theory (DFT) study shows that RuN₄ sites are likely responsible for acetylene hydrochlorination catalytic activity. This work provides a strategy to design efficient single-atom catalysts for acetylene hydrochlorination and helps us to gain deeper understanding of single-atom catalytic mechanisms.

Advances in Versatile Nanoscale Catalyst for the Reductive Catalytic Fractionation of Lignin

In the past five years, biomass-derived biofuels and biochemicals were widely studied both in academia and industry as promising alternatives to petroleum. In this Review, the latest progress of the synthesis and fabrication of porous nanocatalysts that are used in catalytic transformations involving hydrogenolysis of lignin is reviewed in terms of their textural properties, catalytic activities, and stabilities. A particular emphasis is made with regard to the catalyst design for the hydrogenolysis of lignin and/or lignin model compounds. Furthermore, the effects of different supports on the lignin hydrogenolysis/hydrogenation are discussed in detail. Finally, the challenges and future opportunities of lignin hydrogenolysis over nanomaterial-supported catalysts are also presented.

Evidence of a Phenolic Pool as a Key Intermediate for Zeolite-Catalyzed Lignin Pyrolysis

The phenolic pool is considered to be an important intermediate during the catalytic conversion of biomass. However, no direct evidence has been reported on its full picture on a molecular level due to the huge challenges in probing the reactive and lowly volatile phenolic oligomers with state-of-the-art technologies. Herein, we report the online detection and structural identification of a phenolic pool by utilizing in-situ atmospheric-pressure photoionization mass spectrometry, demonstrating that the phenolic pool is formed through repolymerization of monomers with an equidistant group pattern and acts as a key mechanistic step for both valuable aromatic products and undesired coke. The exploration of the real reactive species is also of great importance for the rational design and synthesis of advanced catalysts with high activity.

Conversion of Polyolefin Waste to Liquid Alkanes with Ru-Based Catalysts under Mild Conditions

Chemical upcycling of waste polyolefins via hydrogenolysis offers unique opportunities for selective depolymerization compared to high temperature thermal deconstruction. Here, we demonstrate the hydrogenolysis of polyethylene into liquid alkanes under mild conditions using ruthenium nanoparticles supported on carbon (Ru/C). Reactivity studies on a model n-octadecane substrate showed that Ru/C catalysts are highly active and selective for the hydrogenolysis of C(sp³)-C(sp³) bonds at temperatures ranging from 200 to 250 °C. Under optimal conditions of 200 °C in 20 bar H₂, polyethylene (average M _w ∼ 4000 Da) was converted into liquid n-alkanes with yields of up to 45% by mass after 16 h using a 5 wt % Ru/C catalyst with the remaining products comprising light alkane gases (C₁-C₆). At 250 °C, nearly stoichiometric yields of CH₄ were obtained from polyethylene over the catalyst. The hydrogenolysis of long chain, low-density polyethylene (LDPE) and a postconsumer LDPE plastic bottle to produce C₇-C₄₅ alkanes was also achieved over Ru/C, demonstrating the feasibility of this reaction for the valorization of realistic postconsumer plastic waste. By identifying Ru-based catalysts as a class of active materials for the hydrogenolysis of polyethylene, this study elucidates promising avenues for the valorization of plastic waste under mild conditions.

Depolymerization of Lignin into Monophenolics by Ferrous/Persulfate Reagent under Mild Conditions

This study aimed to use a persulfate together with transition metal ions as the reagent to effectively depolymerize lignin into monophenolic compounds under mild conditions (ambient pressure, temperature <100 °C). The Box-Behnken experimental design in combination with the response surface methodology was applied to obtain optimized reaction conditions. The results showed that this reagent could depolymerize up to 99 % of lignin dimers to mainly veratraldehyde. This reaction also successfully depolymerized industrial lignins with a high yield of phenolic oils and monophenolic compounds. Quantum chemistry calculations using the density functional theory level indicated that the persulfate free radical attacks C_β to break the β-O-4 bond of lignin through a five-membered ring mechanism. This mechanism using persulfate free radicals has a lower activation barrier than that using hydroxyl radicals. Gel permeation chromatography and 2D-NMR spectroscopy demonstrated the effective cleavage of the β-O-4 bonds of lignin after depolymerization.

Constructing and controlling ruthenium active phases for acetylene hydrochlorination

Ru-Based catalysts with distinct active phases from Ru0, to RuO2, RuCl3 and RuCl2N were synthesized and evaluated in acetylene hydrochlorination. RuCl2N is identified as the efficient active phase due to its co-activation of acetylene and hydrogen chloride. This discovery holds great potential to accelerate the large-scale application of Ru-based catalysts in industry.

Ru/g-C3N4 as an efficient catalyst for selective hydrogenation of aromatic diamines to alicyclic diamines

A series of Ru/g-C3N4 materials with highly dispersed Ru were firstly prepared by an ultrasonic impregnation method using carbon nitride as a support. The catalysts were characterized by various techniques including BET and elemental analysis, ICP-AES, XPS, XRD, CO2-TPD and TEM. The results demonstrated that Ru/g-C3N4 materials with a mesoporous structure and highly dispersed Ru were successfully prepared. The chemo-selective hydrogenation of p-phenylenediamine (PPDA) to 1,4-cyclohexanediamine (CHDA) over Ru/g-C3N4 as a model reaction was investigated in detail. PPDA conversion of 100% with a CHDA selectivity of more than 86% could be achieved under mild conditions. It can be inferred that the carbon nitride support possessed abundant basic sites and the Ru/g-C3N4-T catalysts provided suitable basicity for the aromatic ring hydrogenation. Compared to the N-free Ru/C catalyst, the involvement of nitrogen species in Ru/g-C3N4 remarkably improved the catalytic performance. In addition, the recyclability of the catalyst demonstrated that the aggregation of Ru nanoparticles was responsible for the decrease of the catalytic activity. Furthermore, this strategy also could be expanded to the selective hydrogenation of other aromatic diamines to alicyclic diamines.

Heterogeneous Catalyst Design Principles for the Conversion of Lignin into High-Value Commodity Fuels and Chemicals

Lignin valorization has risen as a promising pathway to supplant the use of petrochemicals for chemical commodities and fuels. However, the challenges of separating and breaking down lignin from lignocellulosic biomass are the primary barriers to success. Integrated biorefinery systems that incorporate both homo- and heterogeneous catalysis for the upgrading of lignin intermediates have emerged as a viable solution. Homogeneous catalysis can perform selected chemistries, such as the hydrolysis and dehydration of ester or ether bonds, that are more suitable for the pretreatment and fractionation of biomass. Heterogeneous catalysis, however, offers a tunable platform for the conversion of extracted lignin into chemicals, fuels, and materials. Tremendous effort has been invested in elucidating the necessary factors for the valorization of lignin by using heterogeneous catalysts, with efforts to explore more robust methods to drive down costs. Current progress in lignin conversion has fostered numerous advances, but understanding the key catalyst design principles is important for advancing the field. This Minireview aims to provide a summary on the fundamental design principles for the selective conversion of lignin by using heterogeneous catalysts, including the pairing of catalyst metals, supports, and solvents. The review puts a particular focus on the use of bimetallic catalysts on porous supports as a strategy for the selective conversion of lignin. Finally, future research on the valorization of lignin is proposed on the basis of recent progress.

In situ preparation of Ru-N-doped template-free mesoporous carbons as a transparent counter electrode for bifacial dye-sensitized solar cells

The development of a highly active, long-lasting, and cost-effective electrocatalyst as an alternative to platinum (Pt) is a vital issue for the commercialization of dye-sensitized solar cells. In this study, Ru-N-doped template-free mesoporous carbon (Ru-N-TMC) was prepared by the direct stabilization and carbonization of the poly(butyl acrylate)-b-polyacrylonitrile (PBA-b-PAN) block copolymer and ruthenium(iii) acetylacetonate [Ru(acac)3]. During the stabilization process, microphase separation occurred in the PBA-b-PAN block copolymer due to the incompatibility between the two blocks, and the PAN block transformed to N-doped semi-graphitic carbon. In the carbonization step, the PBA block was eliminated as a porous template, creating hierarchal mesopores/micropores. Meanwhile, Ru(acac)3 was decomposed to Ru, which was homogeneously distributed over the carbon substrate and anchored through N and O heteroatoms. The resulting Ru-N-TMC showed ultra-low charge transfer resistance (Rct = 0.034 Ω cm2) in the Co(bipyridine)33+/2+ reduction reaction, indicating very high electrocatalytic ability. Even though it is a transparent counter electrode (CE, average visible transmittance of 42.25%), covering a small fraction of the fluorine doped tin oxide (FTO)/glass substrate with Ru-N-TMC, it led to lower charge transfer resistance (Rct = 0.55 Ω cm2) compared to Pt (Rct = 1.00 Ω cm2). The Ru-N-TMC counter electrode exhibited a superior power conversion efficiency (PCE) of 11.42% compared to Pt (11.16%) when employed in SGT-021/Co(bpy)33+/2+ based dye-sensitized solar cells (DSSCs). Furthermore, a remarkable PCE of 10.13% and 8.64% from front and rear illumination, respectively, was obtained when the Ru-N-TMC counter electrode was employed in a bifacial DSSC. The outstanding catalytic activity and PCE of Ru-N-TMC were due to the high surface area of Ru-N-TMC, which contained numerous active species (Ru and N), easily facilitated to redox ions through the hierarchical microporous/mesoporous structure.

One-step alcoholysis of lignin into small-molecular aromatics: Influence of temperature, solvent, and catalyst

•

The reactant suspension mode is an effective strategy to deoxy-liquefaction of lignin.

•

The catalyst Cu-C has the optimal catalytic activity and selectivity in methanol.

•

The catalyst Fe-SiC possesses the optimal catalytic deoxygenation in ethanol.

•

The cleavages of C—O ether bonds and C—C bonds directly promote the formation of small-molecular aromatics.

Lignin valorization is a challenge because of its complex structure and high thermal stability. Supercritical alcoholysis of lignin without external hydrogen in a self-made high-pressure reactor is investigated under different temperatures (450–500 °C) and solvents as well as catalysts by using a reactant suspension mode. Small-molecular arenes and mono-phenols (C₇-C₁₂) are generated under short residence time of 30 min. High temperature (500 °C) favors efficient deoxy-liquefaction of lignin (70%) and formation of small-molecular arenes (C₆-C₉). Solvents methanol and ethanol demonstrate much more synergistic effect on efficient deoxy-liquefaction of lignin than propanol. The catalyst Cu-C has the optimal activity and selectivity in methanol (70% of conversion, 83.93% of arenes), whereas Fe-SiC possesses the optimal catalytic deoxygenation in ethanol, resulting in the formation of arenes other than phenols. Further analysis indicates that lignin is converted into arenes by efficient cleavages of C—O ether bonds and C—C bonds under high temperature and pressure.