Water-Tolerant and Atom Economical Amide Bond Formation by Metal-Substituted Polyoxometalate Catalysts

Backbone-Enabled and Ester Groups Switched δ-C(sp2)-H Amination/Fluorination: Cyclic Dipeptides Synthesis

An efficient and concise strategy for the synthesis of cyclic dipeptides via Pd-catalyzed site-selective δ-C(sp2)-H amination/fluorination and N-to-C cyclization is disclosed. The backbone amides within the dipeptides serves as endogenous directing groups, while the desired products were switched by the C-terminal ester group. This chemistry presents a novel and robust alternative to construct cyclodipeptide fragments.

Aryl selenonium vs. aryl sulfonium counterions in polyoxometalate chemistry: the impact of Se+ cationic centers on the photocatalytic reduction of dichromate

A selenonium organic counter ion has been used in polyoxometalate chemistry to develop a new aryl selenonium polyoxometalate (POM) hybrid, and its photocatalytic properties have been explored in comparison with an aryl sulfonium POM-hybrid counterpart for the first time. The chalcogenonium counterions, namely, methyldiphenylsulfonium trifluoromethane sulfonate (MDPST) and methyldiphenylselenonium trifluoromethane sulfonate (MDPSeT), and their octamolybdate ([Mo8O26]4-) hybrids, 1 and 2, with the general formula (C13H13X)4[Mo8O26] (where X = S for 1 and Se for 2) were synthesized and characterized. Hybrids 1 and 2 vary in their chalcogenonium cationic center (S+vs. Se+), which enabled a direct comparison of their photocatalytic properties as a function of the cationic center. The photocatalytic activities of hybrids 1 and 2 were tested using the reduction of dichromate (Cr2O72-) as a model reaction under UV irradiation. A 99% photocatalytic reduction of Cr2O72- with a rate constant of 0.0305 min-1 was achieved with hybrid 2, while only a 67% reduction with a rate constant of 0.0062 min-1 was observed with hybrid 1 in 180 minutes. The better catalytic performance of hybrid 2 may be correlated to the larger atomic radii of Se than S, which helps in better stabilizing the photogenerated electron-hole (e--h+) pair on the POM cluster by polarizing its lone pair more efficiently compared to S. The catalytic recyclability was tested for up to 4 cycles using hybrid 2, and up to 98% reduction was obtained even after the 4th cycle. Recyclability tests and control experiments also indicated the generation of some elemental Se through possible cleavage of some C-Se bonds of MDPSe under prolonged UV exposure during catalysis, and the Se thus generated was found to contribute to the catalytic reduction of dichromate. This study, therefore, opens new avenues for aryl selenonium moieties and their POM hybrids for potential catalytic applications.

Reactivity of metal-oxo clusters towards biomolecules: from discrete polyoxometalates to metal-organic frameworks

Metal-oxo clusters hold great potential in several fields such as catalysis, materials science, energy storage, medicine, and biotechnology. These nanoclusters of transition metals with oxygen-based ligands have also shown promising reactivity towards several classes of biomolecules, including proteins, nucleic acids, nucleotides, sugars, and lipids. This reactivity can be leveraged to address some of the most pressing challenges we face today, from fighting various diseases, such as cancer and viral infections, to the development of sustainable and environmentally friendly energy sources. For instance, metal-oxo clusters and related materials have been shown to be effective catalysts for biomass conversion into renewable fuels and platform chemicals. Furthermore, their reactivity towards biomolecules has also attracted interest in the development of inorganic drugs and bioanalytical tools. Additionally, the structural versatility of metal-oxo clusters allows for the efficiency and selectivity of the biomolecular reactions they promote to be readily tuned, thereby providing a pathway towards reaction optimization. The properties of the catalyst can also be improved through incorporation into solid supports or by linking metal-oxo clusters together to form Metal-Organic Frameworks (MOFs), which have been demonstrated to be powerful heterogeneous catalysts. Therefore, this review aims to provide a comprehensive and critical analysis of the state of the art on biomolecular transformations promoted by metal-oxo clusters and their applications, with a particular focus on structure-activity relationships.

Green, Safe, and Reliable Synthesis of Bimetallic MOF-808 Nanozymes With Enhanced Aqueous Stability and Reactivity for Biological Applications

Bimetallic metal-organic frameworks (MOFs) are promising nanomaterials whose reactivity towards biomolecules remains challenging due to issues related to synthesis, stability, control over metal oxidation state, phase purity, and atomic level characterization. Here, these shortcomings are rationally addressed through development of a synthesis of mixed metal Zr/Ce-MOFs in aqueous environment, overcoming significant hurdles in the development of MOF nanozymes, sufficiently stable on biologically relevant conditions. Specifically, a green and safe synthesis of Zr/Ce-MOF-808 is reported in water/acetic acid mixture which affords remarkably water-stable materials with reliable nanozymatic reactivity, including MOFs with a high Ce content previously reported to be unstable in water. The new materials outperform analogous bimetallic MOF nanozymes, showcasing that rational synthesis modifications could impart outstanding improvements. Further, atomic-level characterization by X-ray Absorption Fine Structure (XAFS) and X-ray Diffraction (XRD) confirmed superior nanozymes arise from differences in the synthetic method, which results in aqueous stable materials, and Ce incorporation, which perturbs the ligand exchange dynamics of the material, and could ultimately be used to fine tune the intrinsic MOF reactivity. Similar rational strategies which leverage metals in a synergistic manner should enable other water-stable bimetallic MOF nanozymes able to surpass existing ones, laying the path for varied biotechnological applications.

Trimethylaluminum-mediated one-pot peptide elongation

Efficient and straightforward peptide bond formation of N-, and C-terminal unprotected amino acids was successfully achieved by using trimethylaluminum. The coupling reaction was accomplished by pre-reaction of N-, and C-terminal unprotected amino acids and trimethylaluminum to form a five-membered ring that smoothly reacted with nucleophilic amino acid esters. This simple and highly efficient reaction system allows one-pot tripeptide synthesis without the need for expensive coupling reagents. Furthermore, peptide bond formation can be effectively achieved even for amino acids with bulky substituents at the side chain to afford the corresponding tripeptides in high yields in a one-pot manner. In addition, the reaction can be applied for further peptide elongation by the subsequent addition of amino acids and trimethylaluminum. We anticipate that this cost-effective, straightforward, and efficient protocol will be useful for the synthesis of a wide variety of peptides.

Concise Synthesis of 2,5-Diketopiperazines via Catalytic Hydroxy-Directed Peptide Bond Formations

2,5-Diketopiperazines (DKPs) with hydroxymethyl functional groups are essential structures found in many bioactive molecules and functional materials. We have established a simple protocol for the concise synthesis of this type of DKPs through diboronic acid anhydride-catalyzed hydroxy-directed peptide bond formations. The sequential reactions in this report, which consist of three steps, an intermolecular catalytic condensation reaction in which water is the only byproduct, a simple deprotection of the nitrogen-protecting group, and an intramolecular cyclization, enabled the synthesis of functionalized DKPs in high to excellent yields without any intermediate purification. The utility of this protocol has been demonstrated by synthesizing natural products, phomamide and Cyclo(Deala-l-Leu).

Exploring the Reactivity of Polyoxometalates toward Proteins: From Interactions to Mechanistic Insights

The latest advances in the study of the reactivity of metal-oxo clusters toward proteins showcase how fundamental insights obtained so far open new opportunities in biotechnology and medicine. In this Perspective, these studies are discussed through the lens of the reactivity of a family of soluble anionic metal-oxo nanoclusters known as polyoxometalates (POMs). POMs act as catalysts in a wide range of reactions with several different types of biomolecules and have promising therapeutic applications due to their antiviral, antibacterial, and antitumor activities. However, the lack of a detailed understanding of the mechanisms behind biochemically relevant reactions-particularly with complex biological systems such as proteins-still hinders further developments. Hence, in this Perspective, special attention is given to reactions of POMs with peptides and proteins showcasing a molecular-level understanding of the reaction mechanism. In doing so, we aim to highlight both existing limitations and promising directions of future research on the reactivity of metal-oxo clusters toward proteins and beyond.

Heterocyclic Boron Acid Catalyzed Dehydrative Amidation of Aliphatic/Aromatic Carboxylic Acids with Amines

A commercially available and versatile dehydrative amidation catalyst, featuring a thianthrene boron acid structure, has been developed. The catalyst shows high catalytic activity to both aliphatic and less reactive aromatic carboxylic acid substrates, including several bioactive or clinical molecules with a carboxylic acid group.

A Zr-added Dawson-type poly(polyoxometalate)

A novel Zr-added trimer, [H₂N(CH₃)₂]₁₀H₁₄[(Zr₂P₂W₁₆O₆₁)₃]·7H₂O (1), has been made under hydrothermal conditions, and contains the highest number of Zr centers in known Dawson-type poly(POM)s. A remarkable feature of this study is the first discovery of a new type of divacant [α-5,10-P₂W₁₆O₆₀]^14- fragment, which assembles with Zr⁴⁺ ions to form a cyclic trimer. Furthermore, 1 as a heterogeneous catalyst exhibits high activity for the selective oxidative degradation of a sulfur mustard simulant CEES.

Organo-cyanamides: convenient reagents for catalytic amidation of carboxylic acids

An unprecedented DMAP-catalysed amidation of aryl and alkyl carboxylic acids with organo-cyanamides has been developed. Unlike the use of N-cyano-N-phenyl-p-methylbenzenesulfonamide (NCTS) as an electrophilic cyanating reagent, an unusual desulfonylation/decyanation reaction model has been disclosed for the first time. Remarkable features of this reaction include readily available substrates, simple operation and broad scope, enabling the efficient synthesis of structurally diverse amides. The synthetic utility of this protocol was demonstrated by the late-stage amidation of bioactive carboxylic acids and a scale-up reaction.

An intramolecular hydrogen bond-promoted "green" Ugi cascade reaction for the synthesis of 2,5-diketopiperazines with anticancer activity

We report a "green chemistry"-based Ugi cascade reaction to furnish a series of 2,5-diketopiperazines (through nucleophilic attack of amides upon ketones in Ugi adducts) at moderate-to-good yields. Investigation with the MTT assay revealed compound (±) 5c to exhibit potent anticancer activities against acute myeloid leukaemia (MV411; IC₅₀ = 1.7 μM) and acute T lymphocyte leukaemia (Jurkat; IC₅₀ = 5.7 μM) cell lines.

Organic Chemistry and Synthesis Rely More and More upon Catalysts

A few months before the COVID-19 pandemic, Pierre Vogel and Kendall N. Houk published with a new textbook Wiley-VCH, “Organic Chemistry: Theory, Reactivity, and Mechanisms in Modern Synthesis”, with a foreword from the late Roberts H. Grubbs. The book demonstrates how catalytic processes dominate all fields of modern organic chemistry and synthesis, and how invention combines thermodynamics, kinetics, spectroscopy, quantum mechanics, and thermochemical data libraries. Here, the authors present a few case studies that should be of interest to teachers, practitioners of organic and organometallic chemistry, and the engineers of molecules. The Vogel–Houk book is both textbook and reference manual; it provides a modern way to think about chemical reactivity and a powerful toolbox to inventors of new reactions and new procedures.

Two novel telluroniobates with efficient catalytic activity for the imidation/amidation reaction

We present the synthesis and catalytic properties of two novel telluroniobates {Te₁₅Nb₂₁} and {Te₁₀Nb₁₄}. {Te₁₅Nb₂₁} is the first trimeric telluroniobate with the largest number of tellurium atoms in the Te-Nb system. Besides, both clusters exhibit excellent catalytic activity in the amidation reactions of anhydrides and amines, and cyclic imides and bi-amides can be controllably synthesized, which represents a breakthrough in the catalysis of polyoxoniobates.

Atom-economic amide synthesis by using an iron-substituted polyoxometalate catalyst

We report an efficient and economical amidation strategy by using a polyoxometalate-based iron catalyst that affords the corresponding amide products in good yields. All of the aliphatic, aromatic and heterocyclic substrates are produced in high yields without additional base or organic ligands. Most importantly, the first example of heterogeneous iron(III)-catalyzed formation of the diamides is developed.

Zirconium oxo clusters as discrete molecular catalysts for the direct amide bond formation

A discrete dodecanuclear Zr oxo cluster catalyzed the direct formation of amide bonds without the need of water scavenging or dry reactions conditions showcasing the potential of these molecular clusters to become a new class of efficient catalysts.

Fe Foam-Supported FeS2-MoS2 Electrocatalyst for N2 Reduction under Ambient Conditions

Highly efficient catalysts with enough selectivity and stability are essential for electrochemical nitrogen reduction reaction (e-NRR) that has been considered as a green and sustainable route for synthesis of NH₃. In this work, a series of three-dimensional (3D) porous iron foam (abbreviated as IF) self-supported FeS₂-MoS₂ bimetallic hybrid materials, denoted as FeS₂-MoS₂@IF_x, x = 100, 200, 300, and 400, were designed and synthesized and then directly used as the electrode for the NRR. Interestingly, the IF serving as a slow-releasing iron source together with polyoxomolybdates (NH₄)₆Mo₇O₂₄·4H₂O as a Mo source were sulfurized in the presence of thiourea to form self-supported FeS₂-MoS₂ on IF (abbreviated as FeS₂-MoS₂@IF₂₀₀) as an efficient electrocatalyst. Further material characterizations of FeS₂-MoS₂@IF₂₀₀ show that flower cluster-like FeS₂-MoS₂ grows on the 3D skeleton of IF, consisting of interconnected and staggered nanosheets with mesoporous structures. The unique 3D porous structure of FeS₂-MoS₂@IF together with synergy and interface interactions of bimetallic sulfides would make FeS₂-MoS₂@IF possess favorable electron transfer tunnels and expose abundant intrinsic active sites in the e-NRR. It is confirmed that synthesized FeS₂-MoS₂@IF₂₀₀ shows a remarkable NH₃ production rate of 7.1 ×10^-10 mol s^-1 cm^-2 at -0.5 V versus the reversible hydrogen electrode (vs RHE) and an optimal faradaic efficiency of 4.6% at -0.3 V (vs RHE) with outstanding electrochemical and structural stability.

Rapid and Mild Lactamization Using Highly Electrophilic Triphosgene in a Microflow Reactor

Lactams are cyclic amides that are indispensable as drugs and as drug candidates. Conventional lactamization includes acid-mediated and coupling-agent-mediated approaches that suffer from narrow substrate scope, much waste, and/or high cost. Inexpensive, less-wasteful approaches mediated by highly electrophilic reagents are attractive, but there is an imminent risk of side reactions. Herein, a methods using highly electrophilic triphosgene in a microflow reactor that accomplishes rapid (0.5-10 s), mild, inexpensive, and less-wasteful lactamization are described. Methods A and B, which use N-methylmorpholine and N-methylimidazole, respectively, were developed. Various lactams and a cyclic peptide containing acid- and/or heat-labile functional groups were synthesized in good to high yields without the need for tedious purification. Undesired reactions were successfully suppressed, and the risk of handling triphosgene was minimized by the use of microflow technology.

The Dawn of Metal-Oxo Clusters as Artificial Proteases: From Discovery to the Present and Beyond

The selective cleavage of peptide bonds in proteins is of paramount importance in many areas of the biological and medical sciences, playing a key role in protein structure/function/folding analysis, protein engineering, and targeted proteolytic drug design. Current applications that depend on selective protein hydrolysis largely rely on costly proteases such as trypsin, which are sensitive to the pH, ionic strength, and temperature conditions. Moreover, >95% of peptides deposited in databases are generated from trypsin digests, restricting the information within the analyzed proteomes. On the other hand, harsh and toxic chemical reagents such as BrCN are very active but cause permanent modifications of certain amino acid residues. Consequently, transition-metal complexes have emerged as smooth and selective artificial proteases owing to their ability to provide larger fragments and complementary structural information. In the past decade, our group has discovered the unique protease activity of diverse metal-oxo clusters (MOC) and pioneered a distinctive approach to the development of selective artificial proteases. In contrast to classical coordination complexes which often depend on amino acid side chains to control the regioselectivity, the selectivity profile of MOCs is determined by a complex combination of structural factors, such as the protein surface charge, metal coordination to specific side chains, and hydrogen bonding between the protein surface and the MOC scaffold.In this Account, we present a critical overview of our detailed kinetic, spectroscopic, and crystallographic studies in MOC-assisted peptide bond hydrolysis, from its origins to the current rational and detailed mechanistic understanding. To this end, reactivity trends related to the structure and properties of MOCs based on the hydrolysis of small model peptides and key structural aspects governing the selectivity of protein hydrolysis are presented. Finally, our endeavors in seeking the next generation of heterogeneous MOC-based proteases are briefly discussed by embedding MOCs in metal-organic frameworks or using them as discrete nanoclusters in the development of artificial protease-like materials (i.e., nanozymes). The deep and comprehensive understanding sought experimentally and theoretically over the years in aqueous systems with intrinsic polar and charged substrates provides a unique view of the reactivity between inorganic moieties and biomolecules, thereby broadly impacting several different fields (e.g., catalysis in biochemistry, inorganic chemistry, and organic chemistry).

A Copper-Containing Polyoxometalate-Based Metal-Organic Framework as an Efficient Catalyst for Selective Catalytic Oxidation of Alkylbenzenes

A copper-containing polyoxometalate-based metal-organic framework (POMOF), Cu^I₁₂Cl₂(trz)₈[HPW₁₂O₄₀] (HENU-7, HENU = Henan University; trz = 1,2,4-triazole), has been successfully synthesized and well-characterized. In addition, the excellent catalytic ability of HENU-7 has been proved by the selective oxidation of diphenylmethane. Under the optimal conditions, the diphenylmethane conversion obtained over HENU-7 is 96%, while the selectivity to benzophenone is 99%, which outperforms most noble-metal-free POM-based catalysts. Moreover, HENU-7 is stable to reuse for five runs without an obvious loss in activity and also can catalyze the oxidation of different benzylic C-H with satisfactory conversions and selectivities, which implied the significant catalytic activity and recyclability.

Development of sterically hindered siloxide-functionalized polyoxotungstates for the complexation of 5d-metals

In this study, we extend the family of organosilyl-functionalized trivacant Keggin polyoxotungstates, [PW₉O₃₄(RSiOH)₃]^3- (R = ⁿPr, ⁱPr, ^tBu), through the introduction of bulky aryl and aliphatic silanol substituents, namely phenyl, cyclohexyl and biphenyl. This work was performed in order to study the impact of these large functional groups on the accessibility of the well-defined tridentate coordination site. Coordination of hafnium to these type II hybrid polyoxotungstates was conducted in order to study the ability of the bulkier ligand pockets to support larger cations in comparison to those previously reported (e.g. Ti⁴⁺, V³⁺, V⁵⁺, Ge⁴⁺). Increased steric hindrance around the coordination site from the biphenyl groups resulted in much longer reaction times for the complexation reaction compared to the other functional groups used, but the impact of our design toward stabilizing reactive species proved limited, as all complexes easily undergo hydrolysis of the Hf-O^tBu bond in the presence of water. Electrochemical investigations of the ligands and hafnium complexes reveal that the redox events centered on the polyoxotungstate core can be tuned by varying the substituents on the silyl fragment, and exhibit a cathodic shift after coordination of the redox inactive tetravalent cation.