Overview of Selective Oxidation of Ethylene to Ethylene Oxide by Ag Catalysts

Ethylene Oxide in Southeastern Louisiana's Petrochemical Corridor: High Spatial Resolution Mobile Monitoring during HAP-MAP

Ethylene oxide ("EtO") is an industrially made volatile organic compound and a known human carcinogen. There are few reliable reports of ambient EtO concentrations around production and end-use facilities, however, despite major exposure concerns. We present in situ, fast (1 Hz), sensitive EtO measurements made during February 2023 across the southeastern Louisiana industrial corridor. We aggregated mobile data at 500 m spatial resolution and reported average mixing ratios for 75 km of the corridor. Mean and median aggregated values were 31.4 and 23.3 ppt, respectively, and a majority (75%) of 500 m grid cells were above 10.9 ppt, the lifetime exposure concentration corresponding to 100-in-one million excess cancer risk (1 × 10-4). A small subset (3.3%) were above 109 ppt (1000-in-one million cancer risk, 1 × 10-3); these tended to be near EtO-emitting facilities, though we observed plumes over 10 km from the nearest facilities. Many plumes were highly correlated with other measured gases, indicating potential emission sources, and a subset was measured simultaneously with a second commercial analyzer, showing good agreement. We estimated EtO for 13 census tracts, all of which were higher than EPA estimates (median difference of 21.3 ppt). Our findings provide important information about EtO concentrations and potential exposure risks in a key industrial region and advance the application of EtO analytical methods for ambient sampling and mobile monitoring for air toxics.

Boosting Electrocatalytic Ethylene Epoxidation by Single Atom Modulation

The electrochemical synthesis of ethylene oxide (EO) using ethylene and water under ambient conditions presents a low-carbon alternative to existing industrial production process. Yet, the electrocatalytic ethylene epoxidation route is currently hindered by largely insufficient activity, EO selectivity, and long-term stability. Here we report a single atom Ru-doped hollandite structure KIr4O8 (KIrRuO) nanowire catalyst for efficient EO production via a chloride-mediated ethylene epoxidation process. The KIrRuO catalyst exhibits an EO partial current density up to 0.7 A cm-2 and an EO yield as high as 92.0 %. The impressive electrocatalytic performance towards ethylene epoxidation is ascribed to the modulation of electronic structures of adjacent Ir sites by single Ru atoms, which stabilizes the *CH2CH2OH intermediate and facilitates the formation of active Cl2 species during the generation of 2-chloroethanol, the precursor of EO. This work provides a single atom modulation strategy for improving the reactivity of adjacent metal sites in heterogeneous electrocatalysts.

Tailoring the Electronic Metal-Support Interactions in Supported Silver Catalysts through Al modification for Efficient Ethylene Epoxidation

Metal-modified catalysts have attracted extraordinary research attention in heterogeneous catalysis due to their enhanced geometric and electronic structures and outstanding catalytic performances. Silver (Ag) possesses necessary active sites for ethylene epoxidation, but the catalyst activity is usually sacrificed to obtain high selectivity towards ethylene oxide (EO). Herein, we report that using Al can help in tailoring the unoccupied 3d state of Ag on the MnO2 support through strong electronic metal-support interactions (EMSIs), overcoming the activity-selectivity trade-off for ethylene epoxidation and resulting in a very high ethylene conversion rate (~100 %) with 90 % selectivity for EO under mild conditions (170 °C and atmospheric pressure). Structural characterization and theoretical calculations revealed that the EMSIs obtained by the Al modification tailor the unoccupied 3d state of Ag, modulating the adsorption of ethylene (C2H4) and oxygen (O2) and facilitating EO desorption, resulting in high C2H4 conversion. Meanwhile, the increased number of positively charge Ag+ lowers the energy barrier for C2H4(ads) oxidation to produce oxametallacycle (OMC), inducing the unexpectedly high EO selectivity. Such an extraordinary electronic promotion provides new promising pathways for designing advanced metal catalysts with high activity and selectivity in selective oxidation reactions.

Experimental Evidences on Magnetism-Covalent Bonding Interplay in Structural Properties of Solids and during Chemisorption

Valence electrons are one of the main players in solid catalysts and in catalytic reactions, since they are involved in several correlated phenomena like chemical bonding, magnetism, chemisorption, and bond activation. This is particularly true in the case of solid catalysts containing d-transition metals, which exhibit a wide range of magnetic phenomena, from paramagnetism to collective behaviour. Indeed, the electrons of the outer d-shells are, on one hand, involved in the formation of bonds within the structure of a catalyst and on its surface, and, on the other, they are accountable for the magnetic properties of the material. For this reason, the relationship between magnetism and heterogeneous catalysis has been a source of great interest since the mid-20th century. The subject has gained a lot of attention in the last decade, thanks to the orbital engineering of quantum spin-exchange interactions and to the widespread application of external magnetic fields as boosting tools in several catalytic reactions. The topic is discussed here through experimental examples and evidences of the interplay between magnetism and covalent bonding in the structure of solids and during the chemisorption process. Covalent bonding is discussed since it represents one of the strongest contributions to bonds encountered in materials.

Synthetic dioxygenase reactivity by pairing electrochemical oxygen reduction and water oxidation

The reactivity of molecular oxygen is crucial to clean energy technologies and green chemical synthesis, but kinetic barriers complicate both applications. In synthesis, dioxygen should be able to undergo oxygen atom transfer to two organic molecules with perfect atom economy, but such reactivity is rare. Monooxygenase enzymes commonly reductively activate dioxygen by sacrificing one of the oxygen atoms to generate a more reactive oxidant. Here, we used a manganese-tetraphenylporphyrin catalyst to pair electrochemical oxygen reduction and water oxidation, generating a reactive manganese-oxo at both electrodes. This process supports dioxygen atom transfer to two thioether substrate molecules, generating two equivalents of sulfoxide with a single equivalent of dioxygen. This net dioxygenase reactivity consumes no electrons but uses electrochemical energy to overcome kinetic barriers.

Revealing the Nature of Active Oxygen Species and Reaction Mechanism of Ethylene Epoxidation by Supported Ag/α-Al2O3 Catalysts

The oxygen species on Ag catalysts and reaction mechanisms for ethylene epoxidation and ethylene combustion continue to be debated in the literature despite decades of investigation. Fundamental details of ethylene oxidation by supported Ag/α-Al2O3 catalysts were revealed with the application of high-angle annular dark-field-scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy (HAADF-STEM-EDS), in situ techniques (Raman, UV-vis, X-ray diffraction (XRD), HS-LEIS), chemical probes (C2H4-TPSR and C2H4 + O2-TPSR), and steady-state ethylene oxidation and SSITKA (16O2 → 18O2 switch) studies. The Ag nanoparticles are found to carry a considerable amount of oxygen after the reaction. Density functional theory (DFT) calculations indicate the oxidative reconstructed p(4 × 4)-O-Ag(111) surface is stable relative to metallic Ag(111) under the relevant reaction environment. Multiple configurations of reactive oxygen species are present, and their relevant concentrations depend on treatment conditions. Selective ethylene oxidation to EO proceeds with surface Ag4-O2* species (dioxygen species occupying an oxygen site on a p(4 × 4)-O-Ag(111) surface) only present after strong oxidation of Ag. These experimental findings are strongly supported by the associated DFT calculations. Ethylene epoxidation proceeds via a Langmuir-Hinshelwood mechanism, and ethylene combustion proceeds via combined Langmuir-Hinshelwood (predominant) and Mars-van Krevelen (minor) mechanisms.

Eco-friendly food packaging based on paper coated with a bio-based antibacterial coating composed of carbamate starch, calcium lignosulfonate, cellulose nanofibrils, and silver nanoparticles

Traditional paper-based packaging commonly needs to be coated to achieve sufficient mechanical and barrier performances. In this research, a bio-based coating for paper was developed from carbamate starch (Sc), calcium lignosulfonate (CL), and cellulose nanofibrils (CNF). Controlling the electrostatic and hydrogen-bonding interactions among the components of the coating was conducive to tailoring the structure and performance of the coated paper. When the degree of substitution (Ds) of Sc was 0.10, the amount of CL was 1.00 g, and the amount of CNF was 0.65 % of the weight of Sc, the paper coated with the resulting 0.10Sc-1.00CL-0.65CNF coating exhibited increased hydrophobicity and excellent mechanical, air-barrier, and UV-light-barrier properties. After the addition of 0.10 % of silver nano-particles (AgNPs) to the 0.10Sc-1.00CL-0.65CNF coating, the paper coated with the resulting 0.10Sc-1.00CL-0.65CNF-0.10AgNPs coating exhibited good antibacterial activity against Escherichia coli and Staphylococcus aureus. The coated paper was used as the packaging for cherry tomatoes stored under ambient conditions. Due to the synergistic preservation effects of the Sc-CL-CNF coating and AgNPs, the shelf life of the cherry tomatoes was at least 7 days. The coated paper described herein has the potential for applications in the food packaging sector.

Room temperature epoxidation of ethylene over delafossite-based AgNiO2 nanoparticles

A mixed oxide of silver and nickel AgNiO2 was obtained via co-precipitation in alkaline medium. This oxide demonstrates room temperature activity in the reaction of ethylene epoxidation with a high selectivity (up to 70%). Using the PDF method, it was found that the initial structure of AgNiO2 contains stacking faults and silver vacancies, which cause the nonstoichiometry of the oxide (Ag/Ni < 1). It has been established that on the initial surface of AgNiO2 oxide, silver state can be considered as an intermediate between Ag2O and Ag0 (i.e. Agδ+-like), while nickel is characterized by signs of a deeply oxidized state (Ni3+-like). The interaction of AgNiO2 with C2H4 at room temperature leads to the simultaneous removal of two oxygen species with Eb(O 1s) = 529.0 eV and 530.5 eV considered as nucleophilic and electrophilic oxygen states, respectively. Nucleophilic oxygen was attributed to the lattice oxygen (Ag-O-Ni), while the electrophilic species with epoxidation activity was associated with the weakly bound oxygen stabilized on the surface. According to the TPR-C2H4 data, a large number of weakly bound oxygen species were found on the pristine AgNiO2 surface. The removal of such species at room temperature didn't result in noticeable structural transformation of delafossite. As the temperature of ethylene oxidation over AgNiO2 increased, the appearance of Ag0 particles was first observed below 200 °C followed by the complete destruction of the delafossite structure at higher temperatures.

Silver Nanocubes: From Serendipity to Mechanistic Understanding, Rational Synthesis, and Niche Applications

Silver has long been interwoven into human history, and its uses have evolved from currency and jewelry to medicine, information technology, catalysis, and electronics. Within the last century, the development of nanomaterials has further solidified the importance of this element. Despite this long history, there was essentially no mechanistic understanding or experimental control of silver nanocrystal synthesis until about two decades ago. Here we aim to provide an account of the history and development of the colloidal synthesis of silver nanocubes, as well as some of their major applications. We begin with a description of the first accidental synthesis of silver nanocubes that spurred subsequent investigations into each of the individual components of the protocol, revealing piece by piece parts of the mechanistic puzzle. This is followed by a discussion of the various obstacles inherent to the original method alongside mechanistic details developed to optimize the synthetic protocol. Finally, we discuss a range of applications enabled by the plasmonic and catalytic properties of silver nanocubes, including localized surface plasmon resonance, surface-enhanced Raman scattering, metamaterials, and ethylene epoxidation, as well as further derivatization and development of size, shape, composition, and related properties.

A Facile and Rational Method to Tailor the Symmetry of Au@Ag Nanoparticles

Precisely controlling the morphologies of plasmonic metal nanoparticles (NPs) is of great importance for many applications. Here, a facile seed-mediated growth method is demonstrated that tailors the morphologies of Au@Ag NPs from cubes/cuboids to chiral truncated cuboids/octahedra, well-defined octahedra, and tetrahedra, via simply increasing the concentrations of AgNO₃  and cysteine in the halide surfactant systems. Accordingly, the particle symmetries are also tuned. The method is quite robust where seeds with distinct shapes including irregular ones can all lead to uniform Au@Ag NPs. The evolution of these shapes can be illustrated by a recently proposed symmetry-based kinematic theory (SBKT). Furthermore, SBKT shows a strategy to optimize the preparation of chiral/dissymmetric NPs, and the experimental results confirm such a dissymmetric synthesis strategy. Cuboids and octahedra with corners differently truncated are identified as two different chiral forms. The chirality of the NPs is additionally probed by electrochemistry, where the chiral NPs show enantioselectivity in the oxidation of d- and l-glucose. Altogether, the results gain fundamental insights into tailoring the plasmonic NP morphologies, and also suggest strategies to obtain chiral NPs.

Tuning the surface reactivity of oxides by peroxide species

The Mars-van Krevelen mechanism is the foundation for oxide-catalyzed oxidation reactions and relies on spatiotemporally separated redox steps. Herein, we demonstrate the tunability of this separation with peroxide species formed by excessively adsorbed oxygen, thereby modifying the catalytic activity and selectivity of the oxide. Using CuO as an example, we show that a surface layer of peroxide species acts as a promotor to significantly enhance CuO reducibility in favor of H2 oxidation but conversely as an inhibitor to suppress CuO reduction against CO oxidation. Together with atomistic modeling, we identify that this opposite effect of the peroxide on the two oxidation reactions stems from its modification on coordinately unsaturated sites of the oxide surface. By differentiating the chemical functionality between lattice oxygen and peroxide, these results are closely relevant to a wide range of catalytic oxidation reactions using excessively adsorbed oxygen to activate lattice oxygen and tune the activity and selectivity of redox sites.

Tin Active Sites Confined in Zeolite Framework as a Promising Shape-Selective Catalyst for Ethylene Oxide Hydration

Shape-selective stannosilicates have been post-synthesized for the hydration of epoxide to diols. A simple acid treatment has been employed to remove extensively the interlayer double four ring units, converting the three-dimensional (3D) UTL germanosilicate into a 2D layered IPC-1P intermediate. Isomorphous incorporation of tetrahedrally coordinated Sn active centers was realized via solid-liquid treatment of IPC-1P with diammonium hexachlorostannate aqueous solution, which was accompanied by the spontaneous condensation of neighboring silica-rich cfi layers upon calcination and structural construction of a 3D PCR structure. Sn-PCR stannosilicates with tunable Sn contents were thus prepared. With Sn-derived robust Lewis acidity confined in the intersecting 10- and 8-ring channels, the Sn-PCR (Si/Sn molar ratio of 77) catalyst served as a shape-selective nanoreactor for the hydration of ethylene oxide (EO) into ethylene glycol (EG), exhibiting a remarkable EO conversion (99.5 %) as well as a steady EG selectivity (>98.4 %) at greatly reduced H₂ O/EO molar ratio and near-ambient reaction temperature.

Metal-oxide interactions modulating the activity of active oxygen species on atomically dispersed silver catalysts

The activity of active oxygen species on supported Ag atoms can be effectively modulated by metal-support interactions using different oxide supports. The strong interaction between Ag and Al₂O₃ with more electrons transferred from Ag to Al₂O₃ leads to the formation of more Ag-O₂^- (superoxide) species, responsible for the selective oxidation of ethylene to ethylene oxide. The relatively weak interaction between Ag and SiO₂ induces the generation of Ag-O (atomic oxygen) and Ag-O₂^2- (peroxide) species, which are more active for complete oxidation of CO and ethylene to CO₂. This work is of significance for deep understanding of active surface species in atomically dispersed metal catalysts.

Heterogeneous Iridium Single-Atom Molecular-like Catalysis for Epoxidation of Ethylene

Developing efficient and simple catalysts to reveal the key scientific issues in the epoxidation of ethylene has been a long-standing goal for chemists, whereas a heterogenized molecular-like catalyst is desirable which combines the best aspects of homogeneous and heterogeneous catalysts. Single-atom catalysts can effectively mimic molecular catalysts on account of their well-defined atomic structures and coordination environments. Herein, we report a strategy for selective epoxidation of ethylene, which exploits a heterogeneous catalyst comprising iridium single atoms to interact with the reactant molecules that act analogously to ligands, resulting in molecular-like catalysis. This catalytic protocol features a near-unity selectivity (99%) to produce value-added ethylene oxide. We investigated the origin of the improvement of selectivity for ethylene oxide for this iridium single-atom catalyst and attributed the improvement to the π-coordination between the iridium metal center with a higher oxidation state and ethylene or molecular oxygen. The molecular oxygen adsorbed on the iridium single-atom site not only helps to strengthen the adsorption of ethylene molecule by iridium but also alters its electronic structure, allowing iridium to donate electrons into the double bond π* orbitals of ethylene. This catalytic strategy facilitates the formation of five-membered oxametallacycle intermediates, leading to the exceptionally high selectivity for ethylene oxide. Our model of single-atom catalysts featuring remarkable molecular-like catalysis can be utilized as an effective strategy for inhibiting the overoxidation of the desired product. Implementing the concepts of homogeneous catalysis into heterogeneous catalysis would provide new perspectives for the design of new advanced catalysts.

Electrocatalytic CO2 Upgrading to Triethanolamine by Bromine-Assisted C2 H4 Oxidation

The electrocatalytic carbon dioxide (CO₂ ) reduction is a promising approach for converting this greenhouse gas into value-added chemicals, while the capability of producing products with longer carbon chains (C_n >3) is limited. Herein, we demonstrate the Br-assisted electrocatalytic oxidation of ethylene (C₂ H₄ ), a major CO₂ electroreduction product, into 2-bromoethanol by electro-generated bromine on metal phthalocyanine catalysts. Due to the preferential formation of Br₂ over *O or Cl₂ to activate the C=C bond, a high partial current density of producing 2-bromoethanol (46.6 mA⋅cm^-2 ) was obtained with 87.2 % Faradaic efficiency. Further coupling with the electrocatalytic nitrite reduction to ammonia at the cathode allowed the production of triethanolamine with six carbon atoms. Moreover, by coupling a CO₂ electrolysis cell for in situ C₂ H₄ generation and a C₂ H₄ oxidation/nitrite reduction cell, the capability of upgrading of CO₂ and nitrite into triethanolamine was demonstrated.

Identifying Descriptors for Promoted Rhodium-Based Catalysts for Higher Alcohol Synthesis via Machine Learning

Rhodium-based catalysts offer remarkable selectivities toward higher alcohols, specifically ethanol, via syngas conversion. However, the addition of metal promoters is required to increase reactivity, augmenting the complexity of the system. Herein, we present an interpretable machine learning (ML) approach to predict and rationalize the performance of Rh-Mn-P/SiO2 catalysts (P = 19 promoters) using the open-source dataset on Rh-catalyzed higher alcohol synthesis (HAS) from Pacific Northwest National Laboratory (PNNL). A random forest model trained on this dataset comprising 19 alkali, transition, post-transition metals, and metalloid promoters, using catalytic descriptors and reaction conditions, predicts the higher alcohols space-time yield (STYHA) with an accuracy of R 2 = 0.76. The promoter's cohesive energy and alloy formation energy with Rh are revealed as significant descriptors during posterior feature-importance analysis. Their interplay is captured as a dimensionless property, coined promoter affinity index (PAI), which exhibits volcano correlations for space-time yield. Based on this descriptor, we develop guidelines for the rational selection of promoters in designing improved Rh-Mn-P/SiO2 catalysts. This study highlights ML as a tool for computational screening and performance prediction of unseen catalysts and simultaneously draws insights into the property-performance relations of complex catalytic systems.

Oxidation of methane and ethylene over Al incorporated N-doped graphene: A comparative mechanistic DFT study

It is generally recognized that developing effective methods for selective oxidation of hydrocarbons to generate more useful chemicals is a major challenge for the chemical industry. In the present study, density functional theory calculations are conducted to examine the catalytic partial oxidation of methane (CH₄) and ethylene (C₂H₄) by nitrous oxide (N₂O) over Al-incorporated porphyrin-like N-doped graphene (AlN₄-Gr). Adsorption energies for the most stable configurations of CH₄, C₂H₄, and N₂O molecules over the AlN₄-Gr catalyst are determined to be -0.25, -0.64, and -0.40 eV, respectively. According to our findings, N₂O can be efficiently split into N₂ and O_ads species with a negligible activation energy on the AlN₄-Gr surface. Meanwhile, CH₄ and C₂H₄ molecules compete for reaction with the activated oxygen atom (O_ads) that stays on the surface. The energy barriers for partial methane oxidation through the CH₄ + O_ads → CH₃° + HO_ads and CH₃° + HO_ads → CH₃OH reaction steps are 0.16 eV and 0.27 eV, respectively. Furthermore, the produced CH₃OH may be overoxidized by O_ads to give formaldehyde and water molecules by overcoming a relatively low activation barrier. The activation barriers for C₂H₄ epoxidation are small and comparable to those for CH₄ oxidation, implying that AlN₄-Gr is highly active for both reactions. The high energy barrier for the 1,2-hydrogen shift in the OCH₂CH₂ intermediate, on the other hand, makes the production of acetaldehyde impossible under normal conditions. According to the population analysis, the AlN₄-Gr serves as a strong electron donor to aid in the charge transfer between the Al atom and the O_ads moiety, which is necessary for the activation of CH₄ and C₂H₄. The findings of the present study may pave the way for a better understanding of the catalytic oxidation the CH₄ and C₂H₄, as well as for the development of highly efficient noble-metal free catalysts for these reactions.

Design of CuCs-doped Ag-based catalyst for ethylene epoxidation

Our recent theoretical studies have screened out CuCs-doped Ag-based promising catalysts for ethylene epoxidation [ACS Catal. 11, 3371 (2021)]. The theoretical results were based on surface modeling, while in the actual reaction process Ag catalysts are particle shaped. In this work, we combine density functional theory (DFT), Wulff construction theory, and micro kinetic analysis to study the catalytic performance of Ag catalysts at the particle model. It demonstrates that the CuCs-doped Ag catalysts are superior to pure Ag catalysts in terms of selectivity and activity, which is further proved by experimental validation. The characterization analysis finds that both Cu and Cs dopant promote particle growth as well as particle dispersion, resulting in a grain boundary-rich Ag particle. Besides, CuCs also facilitate electrophilic atomic oxygen formation on catalyst surface, which is benefitial for ethylene oxide formation and desorption. Our work provides a case study for catalyst design by combining theory and experiment.

Enhanced Selectivity of the Propylene Epoxidation Reaction on a Cu Monolayer Surface via Eley-Rideal Mechanism

The aerobic oxidation of propylene to selectively achieve propylene oxide (PO) is a challenging reaction in catalysis. Therefore, an active catalyst which shows enhanced PO selectivity is extremely desired. In the present investigation, an attempt has been made to explore the catalytic activity of a mono-atomically thin two-dimensional (2D) hexagonal (HX) Cu layer for selective propylene epoxidation using molecular O₂ with the aid of density functional theory calculations. The results reveal that the conversion of propylene to PO via Eley-Rideal mechanism is an exoergic and barrierless reaction on the O₂ pre-adsorbed Cu monolayer. The Pauli energy component plays a decisive role for barrierless reaction whereas the electrostatic and orbital contribution governs the energetic stability of PO. Car-Parrinello molecular dynamics (CPMD) simulation reinforces the outcomes of climbing image nudged elastic band (CI-NEB) calculation. Further, the formation of oxametallacycle OMC-2 (0.47 eV) is kinetically favourable over OMC-1 (0.87 eV) and AHS (0.50 eV) on O pre-adsorbed 2D HX Cu. Interestingly, the energy barrier for the conversion of OMC-2 to PO (0.70 eV) is considerably low in comparison with the acetone formation (0.90 eV). Therefore, it is worth to mention that the 2D HX Cu surface provides a promising platform for selective propylene epoxidation.

Unravelling the key factors in the chlorine-promoted epoxidation of ethylene over a silver-copper oxide nanocatalyst

Ethylene oxide is one of the most important raw materials in the chemical industry, with an annual production close to 35 million metric tons. Despite its importance, to date, no metal has been found that can compete with the original silver bulk material catalyst discovered in 1931. Recently, a few copper and copper-silver based nanostructures have demonstrated remarkable selectivity and activity, especially when coupled with an industrial chlorine promoter. The present work evaluates the mechanistic role of chlorine as an active promoter of the selective oxidation of ethylene to ethylene oxide in the presence of a silver-copper oxide hybrid nanocatalyst (AgCuO). Experimental kinetic studies combined with density functional theory (DFT) calculations provide insight into the influence that Ag/CuO-supported chlorine atoms have over the ethylene epoxidation reaction. Remarkably, the typically described indirect route via the formation of an oxametallacycle (OMC) is also accompanied by a direct route. Furthermore, the presence of chlorine seems to facilitate a more favorable adsorption energy for ethylene oxide (EO) than for acetaldehyde (AA), the main reaction by-product. As a result, complete oxidation of EO can be further prevented in the presence of this AgCuO hybrid heteronanostructure.

Automated exploitation of the big configuration space of large adsorbates on transition metals reveals chemistry feasibility

Mechanistic understanding of large molecule conversion and the discovery of suitable heterogeneous catalysts have been lagging due to the combinatorial inventory of intermediates and the inability of humans to enumerate all structures. Here, we introduce an automated framework to predict stable configurations on transition metal surfaces and demonstrate its validity for adsorbates with up to 6 carbon and oxygen atoms on 11 metals, enabling the exploration of ~10⁸ potential configurations. It combines a graph enumeration platform, force field, multi-fidelity DFT calculations, and first-principles trained machine learning. Clusters in the data reveal groups of catalysts stabilizing different structures and expose selective catalysts for showcase transformations, such as the ethylene epoxidation on Ag and Cu and the lack of C-C scission chemistry on Au. Deviations from the commonly assumed atom valency rule of small adsorbates are also manifested. This library can be leveraged to identify catalysts for converting large molecules computationally.

The discovery of heterogeneous catalysts for large molecule conversion has been lagging due to the combinatorial inventory of intermediates. Here, the author presents an automated framework to explore the chemical space of reaction intermediates.

Neighboring sp-Hybridized Carbon Participated Molecular Oxygen Activation on the Interface of Sub-nanocluster CuO/Graphdiyne

Activation of O₂ is a crucial step in oxidation processes. Here, the concept of sp-hybridized C≡C triple bonds as an electron donor is adopted to develop highly active and stable catalysts for molecular oxygen activation. We demonstrate that the neighboring sp-hybridized C and Cu sites on the interface of the sub-nanocluster CuO/graphdiyne are the key structures to effectively modulate the O₂ activation process in the bridging adsorption mode. The as-prepared sub-nanocluster CuO/graphdiyne catalyst exhibited the highest CO oxidation activity and readily converted 50% CO at around 133 °C, which is 34 and 94 °C lower than that for CuO/graphene and CuO/active carbon catalysts, respectively. In situ diffused reflectance infrared Fourier transform spectroscopy and density functional theory calculation results proved that the neighboring sp-hybridized C is more favorable to promote the rapid dissociation of carbonate than sp²-hybridized C without overcoming any energy barrier. The gaseous CO directly reacts with the active molecular oxygen and tends to proceed through the E-R mechanism with a relatively low energy barrier (0.20 eV). This work revealed that sp-hybridized C of graphdiyne-based materials could effectively improve the O₂ activation efficiency, which could facilitate the low-temperature oxidation processes.

Automated search for optimal surface phases (ASOPs) in grand canonical ensemble powered by machine learning

The surface of a material often undergoes dramatic structure evolution under a chemical environment, which, in turn, helps determine the different properties of the material. Here, we develop a general-purpose method for the automated search of optimal surface phases (ASOPs) in the grand canonical ensemble, which is facilitated by the stochastic surface walking (SSW) global optimization based on global neural network (G-NN) potential. The ASOP simulation starts by enumerating a series of composition grids, then utilizes SSW-NN to explore the configuration and composition spaces of surface phases, and relies on the Monte Carlo scheme to focus on energetically favorable compositions. The method is applied to silver surface oxide formation under the catalytic ethene epoxidation conditions. The known phases of surface oxides on Ag(111) are reproduced, and new phases on Ag(100) are revealed, which exhibit novel structure features that could be critical for understanding ethene epoxidation. Our results demonstrate that the ASOP method provides an automated and efficient way for probing complex surface structures that are beneficial for designing new functional materials under working conditions.

A computational study of the interaction of oxygenates with the surface of rutile TiO2(110). Structural and electronic trends

A variety of OH containing molecules in their different modes of adsorption onto the rutile TiO₂(110) are studied by means of density functional theory. A special focus is given to ethanol, ethylene glycol and glycerol. The different species were analyzed with respect to the adsorption energy, work function, and atomic Bader charges. Our results show that dissociated adsorption is favored in all cases. Within these modes, the strongest binding is observed in the case of bidentate fully dissociated adsorption, followed by bidentate partially dissociated then the monodentate dissociated modes. The dependence is also noted upon charge transfer analysis. Species adsorbing with two dissociated OH groups show a negative charge which is roughly twice as large compared to those exhibiting only one dissociated group. In the case of molecular adsorption, we find a small positive charge on the adsorbate. The change in work functions obtained is found to be negative in all studied cases. We observe a trend of the work function change being more negative for glycerol (3 OH groups) followed by ethylene glycol (2 OH groups) and the remaining alcohols (1 OH group), thus indicating that the number of OH groups present is an important factor in regards to work function changes. For the complete series of adsorbates studied (methanol, ethanol, isopropanol, ethylene glycol, glycerol, hydrogen peroxide and formic acid) there is a linear relationship between the change in the work function and the adsorption energy for the molecular adsorption mode. The relationship is less pronounced for the dissociated adsorption mode for the same series.

SERS substrate fabrication for biochemical sensing: towards point-of-care diagnostics

Rapid technology development and economic growth have brought attention to public health issues, such as food safety and environmental pollution, which creates an ever-increasing demand for fast and portable sensing technologies. Portable surface-enhanced Raman spectroscopy (SERS) capable of various analyte detection with low concentration in a convenient manner shows advantages in sensing technology including enhanced diagnostic precision, improved diagnostic efficiency, reduced diagnostic cost, and alleviation of patient pain, which emerges as a promising candidate for point-of-care testing (POCT). SERS detection technology based on different nanostructures made of noble metal-based nanomaterials can increase the sensitivity of Raman scattering by 6-8 orders of magnitude, making Raman based trace detection possible, and greatly promote the application scenarios of portable Raman spectrometers. In this perspective, we provide an overview of fundamental knowledge about the SERS mechanism including chemical and electromagnetic field enhancement mechanisms, the design and fabrication of SERS substrates based on materials, progress of using SERS for POCT in biochemical sensing and its clinical applications. Furthermore, we present the prospective of developing new nanomaterials with different functionalities for advanced SERS substrates, as well as the future advancement of biomedical sensing and clinical potential of SERS technology.

Directing transition metal-based oxygen-functionalization catalysis

This review presents the recent progress of oxygen functionalization reactions based on non-electrochemical (conventional organic synthesis) and electrochemical methods. Although both methods have their advantages and limitations, the former approach has been used to synthesize a broader range of organic substances as the latter is limited by several factors, such as poor selectivity and high energy cost. However, because electrochemical methods can replace harmful terminal oxidizers with external voltage, organic electrosynthesis has emerged as greener and more eco-friendly compared to conventional organic synthesis. The progress of electrochemical methods toward oxygen functionalization is presented by an in-depth discussion of different types of electrically driven-chemical organic synthesis, with particular attention to recently developed electrochemical systems and catalyst designs. We hope to direct the attention of readers to the latest breakthroughs of traditional oxygen functionalization reactions and to the potential of electrochemistry for the transformation of organic substrates to useful end products.

The Lord of the Chemical Rings: Catalytic Synthesis of Important Industrial Epoxide Compounds

The epoxidized group, also known as the oxirane group, can be considered as one of the most crucial rings in chemistry. Due to the high ring strain and the polarization of the C–O bond in this three-membered ring, several reactions can be carried out. One can see such a functional group as a crucial intermediate in fuels, polymers, materials, fine chemistry, etc. Literature covering the topic of epoxidation, including the catalytic aspect, is vast. No review articles have been written on the catalytic synthesis of short size, intermediate and macro-molecules to the best of our knowledge. To fill this gap, this manuscript reviews the main catalytic findings for the production of ethylene and propylene oxides, epichlorohydrin and epoxidized vegetable oil. We have selected these three epoxidized molecules because they are the most studied and produced. The following catalytic systems will be considered: homogeneous, heterogeneous and enzymatic catalysis.

Complex Reaction Network Thermodynamic and Kinetic Autoconstruction Based on Ab Initio Statistical Mechanics: A Case Study of O2 Activation on Ag4 Clusters

An approach based on ab initio statistical mechanics is demonstrated for autoconstructing complex reaction networks. Ab initio molecular dynamics combined with Markov state models are employed to study relevant transitions and corresponding thermodynamic and kinetic properties of a reaction. To explore the capability and flexibility of this approach, we present a study of oxygen activation on Ag4 as a model reaction. Specifically, with the same sampled trajectories, it is possible to study the structural effects and the reaction rate of the cited reaction. The results show that this approach is suitable for automatized construction of reaction networks, especially for non-well-studied reactions, which can benefit from this ab initio molecular dynamics based approach to construct comprehensive reaction networks with Markov state models without prior knowledge about the potential energy landscape.

Sonochemically prepared hierarchical MFI-type zeolites as active catalysts for catalytic ethanol dehydration

In this paper, the ultrasonic-assisted desilication technique was reported as an attractive and efficient way for the preparation of hierarchical zeolites with MFI structure type. The prepared materials were used as active catalysts for the dehydration of ethanol into diethyl ether and ethylene. For all catalysts, the selectivity to diethyl ether was ca 95% or higher up to 210 °C, with catalytic activity in the range of 40-68%. In case of desilicated zeolites, at 270-290 °C, the conversion of ethanol was full with selectivity to ethylene ca 80%. MFI-type commercial zeolite was treated with a sodium and/or tetrabutylammonium hydroxide aqueous solutions (NaOH or NaOH/TBAOH) for 30 min. In the case of the application of ultrasounds, a QSonica Q700 sonicator (60 W and 20 kHz) equipped with a "1" diameter horn was used. In all cases, desilication was performed in an ice bath in order to keep the procedure conditions at low temperature. It was indicated that the use of ultrasounds during desilication procedure caused higher extraction of silicon and aluminum, which was connected with an elevated mesoporosity in relation to the samples modified in the absence of ultrasounds. Ultrasonic-assisted treatment of MFI-type zeolite caused also an apparent formation of numerous holes inside zeolite grains, resembling the look of "swiss cheese". Furthermore, it was indicated that the samples prepared using ultrasonic irradiation exhibited enhanced catalytic properties in the dehydration of ethanol. For instance, MFI-type zeolite treated with NaOH/TBAOH alkaline mixture containing 10 mol% of TBAOH in the presence of ultrasounds (M-10 s) demonstrated higher both conversion of ethanol (59% vs. 47%) and selectivity to diethyl ether (95% vs. 93%) in comparison with zeolite modified conventionally (M-10c). The best catalyst was zeolite ultrasonically desilicated with NaOH/TBAOH solution of 70 mol% of TBAOH (M-70s). Generally, this catalyst indicated the highest conversion of ethanol, very high selectivity to diethyl ether (94-100%) at 150-210  °C and the highest selectivity to ethylene among investigated catalysts (21%, 66% and 84%) at 230  °C, 250 ^oC and 270  °C.

Electron donation of non-oxide supports boosts O2 activation on nano-platinum catalysts

Activation of O₂ is a critical step in heterogeneous catalytic oxidation. Here, the concept of increased electron donors induced by nitrogen vacancy is adopted to propose an efficient strategy to develop highly active and stable catalysts for molecular O₂ activation. Carbon nitride with nitrogen vacancies is prepared to serve as a support as well as electron sink to construct a synergistic catalyst with Pt nanoparticles. Extensive characterizations combined with the first-principles calculations reveal that nitrogen vacancies with excess electrons could effectively stabilize metallic Pt nanoparticles by strong p-d coupling. The Pt atoms and the dangling carbon atoms surround the vacancy can synergistically donate electrons to the antibonding orbital of the adsorbed O₂. This synergistic catalyst shows great enhancement of catalytic performance and durability in toluene oxidation. The introduction of electron-rich non-oxide substrate is an innovative strategy to develop active Pt-based oxidation catalysts, which could be conceivably extended to a variety of metal-based catalysts for catalytic oxidation.

Activation of O₂ is a critical step in heterogeneous catalytic oxidation. Here, the authors adopt the concept of increased electron donors induced by nitrogen vacancy to develop an efficient strategy for preparing highly active and stable catalysts for molecular O₂ activation.