Magnetic Memory from Site Isolated Dy(III) on Silica Materials

Room-temperature-persistent magnetic interaction between coordination complexes and nanoparticles in maghemite-based nanohybrids

Maghemite nanoparticles functionalised with Co(II) coordination complexes at their surface show a significant increase of their magnetic anisotropy, leading to a doubling of the blocking temperature and a sixfold increase of the coercive field. Magnetometric studies suggest an enhancement that is not related to surface disordering, and point to a molecular effect involving magnetic exchange interactions mediated by the oxygen atoms at the interface as its source. Field- and temperature-dependent X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) studies show that the magnetic anisotropy enhancement is not limited to surface atoms and involves the core of the nanoparticle. These studies also point to a mechanism driven by anisotropic exchange and confirm the strength of the magnetic exchange interactions. The coupling between the complex and the nanoparticle persists at room temperature. Simulations based on the XMCD data give an effective exchange field value through the oxido coordination bridge between the Co(II) complex and the nanoparticle that is comparable to the exchange field between iron ions in bulk maghemite. Further evidence of the effectiveness of the oxido coordination bridge in mediating the magnetic interaction at the interface is given with the Ni(II) analog to the Co(II) surface-functionalised nanoparticles. A substrate-induced magnetic response is observed for the Ni(II) complexes, up to room temperature.

Challenges for exploiting nanomagnet properties on surfaces

Molecular complexes with single-molecule magnet (SMM) or qubit properties, commonly called molecular nanomagnets, are great candidates for information storage or quantum information processing technologies. However, the implementation of molecular nanomagnets in devices for the above-mentioned applications requires controlled surface deposition and addressing the nanomagnets' properties on the surface. This Perspectives paper gives a brief overview of molecular properties on a surface relevant for magnetic molecules and how they are affected when the molecules interact with a surface; then, we focus on systems of increasing complexity, where the relevant SMMs and qubit properties have been observed for the molecules deposited on surfaces; finally, future perspectives, including possible ways of overcoming the problems encountered so far are discussed.

M-Ge-Si thermolytic molecular precursors and models for germanium-doped transition metal sites on silica

The synthesis, thermolysis, and surface organometallic chemistry of thermolytic molecular precursors based on a new germanosilicate ligand platform, -OGe[OSi(OtBu)3]3, is described. Use of this ligand is demonstrated with preparation of complexes containing the first-row transition metals Cr, Mn, and Fe. The thermolysis and grafting behavior of the synthesized complexes, Fe{OGe[OSi(OtBu)3]3}2 (FeGe), Mn{OGe[OSi(OtBu)3]3}2(THF)2 (MnGe) and Cr{OGe[OSi(OtBu)3]3}2(THF)2 (CrGe), was evaluated using a combination of thermogravimetric analysis; nuclear magnetic resonance (NMR), ultraviolet-visible (UV-Vis), and electron paramagnetic resonance (EPR) spectroscopies; and single-crystal X-ray diffraction (XRD). Grafting of the precursors onto SBA-15 mesoporous silica and subsequent calcination in air led to substantial changes in transition metal coordination environments and oxidation states, the implications of which are discussed in the context of low-coordinate and low oxidation state thermolytic molecular precursors.

Increasing the Magnetic Blocking Temperature of Single-Molecule Magnets

The synthesis of single-molecule magnets (SMMs), magnetic complexes capable of retaining magnetization blocking for a long time at elevated temperatures, has been a major concern for magnetochemists over the last three decades. In this review, we describe basic SMMs and the different approaches that allow high magnetization-blocking temperatures to be reached. We focus on the basic factors affecting magnetization blocking, magnetic axiality and the height of the blocking barrier, which can be used to group different families of complexes in terms of their SMM efficiency. Finally, we discuss several practical routes for the design of mono- and polynuclear complexes that could be applied in memory devices.

Nanostructures as the Substrate for Single-Molecule Magnet Deposition

Anchoringsingle-molecule magnets (SMMs) on the surface of nanostructures is gaining particular interest in the field of molecular magnetism. The accurate organization of SMMs on low-dimensional substrates enables controlled interactions and the possibility of individual molecules' manipulation, paving the route for a broad range of nanotechnological applications. In this comprehensive review article, the most studied types of SMMs are presented, and the quantum-mechanical origin of their magnetic behavior is described. The nanostructured matrices were grouped and characterized to outline to the reader their relevance for subsequent compounding with SMMs. Particular attention was paid to the fact that this process must be carried out in such a way as to preserve the initial functionality and properties of the molecules. Therefore, the work also includes a discussion of issues concerning both the methods of synthesis of the systems in question as well as advanced measurement techniques of the resulting complexes. A great deal of attention was also focused on the issue of surface-molecule interaction, which can affect the magnetic properties of SMMs, causing molecular crystal field distortion or magnetic anisotropy modification, which affects quantum tunneling or magnetic hysteresis, respectively. In our opinion, the analysis of the literature carried out in this way will greatly help the reader to design SMM-nanostructure systems.

Tailored Lewis Acid Sites for High-Temperature Supported Single-Molecule Magnetism

Generating or even retaining slow magnetic relaxation in surface immobilized single-molecule magnets (SMMs) from promising molecular precursors remains a great challenge. Illustrative examples are organolanthanide compounds that show promising SMM properties in molecular systems, though surface immobilization generally diminishes their magnetic performance. Here, we show how tailored Lewis acidic Al(III) sites on a silica surface enable generation of a material with SMM characteristics via chemisorption of (Cp^ttt)₂DyCl ((Cp^ttt)^- = 1,2,4-tri(tert-butyl)-cyclopentadienide). Detailed studies of this system and its diamagnetic Y analogue indicate that the interaction of the metal chloride with surface Al sites results in a change of the coordination sphere around the metal center inducing for the dysprosium-containing material slow magnetic relaxation up to 51 K with hysteresis up to 8 K and an effective energy barrier (U_eff) of 449 cm^-1, the highest reported thus far for a supported SMM.

Luminescence of Macrocyclic Mononuclear DyIII Complexes and Their Immobilization on Functionalized Silicon-Based Surfaces

Two mononuclear Dy^III complexes, [Dy(L¹)(NCS)₃] (Dy-EDA) and [Dy(L²)(NCS)₃] (Dy-DAP), where Lⁿ (n = 1-2) corresponds to a macrocyclic ligand derived from 2,6-pyridinedicarboxaldehyde and ethylenediamine (L¹) and 1,3-diaminepropane (L²) were immobilized on functionalized silicon-based surfaces. This was achieved by the microcontact printing (μCP) technique, generating patterns on a functionalized surface via covalent bond formation through the auxiliary -NCS ligands present in the macrocyclic complex species. With this strategy, it was possible to control the position of the immobilized molecules on the surface. Water contact angle measurements, X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectra (IRRAS), and atomic force microscopy (AFM) confirmed that the surfaces were successfully functionalized. Furthermore, the optical properties in a broad temperature range were investigated for the as-prepared compounds. At room temperature, Dy-EDA was shown to emit in the deep blue region (Commission Internationald'Eclairage (CIE): (0.175, 0.128)), while Dy-DAP in the white region (CIE: (0.252, 0.312)). The different CIE values were due to the contribution of the strong emission of the ligand in the case of Dy-EDA. Besides, surface photoluminescence measurements showed that the immobilized complexes retained their bulk emissive properties.

Discovery of a Dysprosium Metallocene Single-Molecule Magnet with Two High-Temperature Orbach Processes

Magnetic bistability in single-molecule magnets (SMMs) is a potential basis for new types of nanoscale information storage material. The standard model for thermally activated relaxation of the magnetization in SMMs is based on the occurrence of a single Orbach process. Here, we show that incorporating a phosphorus atom into the framework of the dysprosium metallocene [(Cp^iPr5)Dy(Cp^PEt4)]⁺[B(C₆F₅)₄]⁻ (Cp^iPr5 is penta-isopropylcyclopentadienyl, Cp^PEt4 is tetraethylphospholyl) leads to the occurrence of two distinct high-temperature Orbach processes, with energy barriers of 1410(10) and 747(7) cm^–1, respectively. These barriers provide experimental evidence for two different spin–phonon coupling regimes, which we explain with the aid of ab initio calculations. The strong and highly axial crystal field in this SMM also allows magnetic hysteresis to be observed up to 70 K, using a scan rate of 25 Oe s^–1. In characterizing this SMM, we show that a conventional Debye model and consideration of rotational contributions to the spin–phonon interaction are insufficient to explain the observed phenomena.

A phospholyl-ligated dysprosium metallocene single-molecule magnet shows two high-temperature Orbach relaxation processes with effective energy barriers of 1410(10) and 747(7) cm⁻¹, and magnetic hysteresis up to 70 K when using a scan rate of 25 Oe s⁻¹.

Strain in Silica-Supported Ga(III) Sites: Neither Too Much nor Too Little for Propane Dehydrogenation Catalytic Activity

Well-defined Ga(III) sites on SiO₂ are highly active, selective, and stable catalysts in the propane dehydrogenation (PDH) reaction. In this contribution, we evaluate the catalytic activity toward PDH of tricoordinated and tetracoordinated Ga(III) sites on SiO₂ by means of first-principles calculations using realistic amorphous periodic SiO₂ models. We evaluated the three reaction steps in PDH, namely, the C-H activation of propane to form propyl, the β-hydride (β-H) transfer to form propene and a gallium hydride, and the H-H coupling to release H₂, regenerating the initial Ga-O bond and closing the catalytic cycle. Our work shows how Brønsted-Evans-Polanyi relationships are followed to a certain extent for these three reaction steps on Ga(III) sites on SiO₂ and highlights the role of the strain of the reactive Ga-O pairs on such sites of realistic amorphous SiO₂ models. It also shows how transition-state scaling holds very well for the β-H transfer step. While highly strained sites are very reactive sites for the initial C-H activation, they are more difficult to regenerate. The corresponding less strained sites are not reactive enough, pointing to the need for the right balance in strain to be an effective site for PDH. Overall, our work provides an understanding of the intrinsic activity of acidic Ga single sites toward the PDH reaction and paves the way toward the design and prediction of better single-site catalysts on SiO₂ for the PDH reaction.

Leveraging Surface Siloxide Electronics to Enhance the Relaxation Properties of a Single-Molecule Magnet

Single-molecule magnets (SMMs) hold promise for unmatched information storage density as well as for applications in quantum computing and spintronics. To date, the most successful SMMs have been organometallic lanthanide complexes. However, their surface immobilization, one of the requirements for device fabrication and commercial application, remains challenging due to the sensitivity of the magnetic properties to small changes in the electronic structure of the parent SMM. Thus, finding controlled approaches to SMM surface deposition is a timely challenge. In this contribution we apply the concept of isolobality to identify siloxides present at the surface of partially dehydroxylated silica as a suitable replacement for archetypal ligand architectures in organometallic SMMs. We demonstrate theoretically and experimentally that isolated siloxide anchoring sites not only enable successful immobilization but also lead to a 2 orders of magnitude increase in magnetization relaxation times.

Electron paramagnetic resonance of lanthanides

Many applications of lanthanides exploit their electron spin relaxation properties. Double electron-electron measurements of distances are possible because of the relatively long relaxation times of Gd³⁺. Relaxation enhancement measurements of distance are possible because of the much shorter relaxation times of other lanthanides. Magnetic resonance imaging contrast agents use the long relaxation time of the S-state Gd³⁺ ion, and NMR shift reagents use the fast relaxation of selected other lanthanides. Other than Gd³⁺ and the isoelectronic Eu²⁺ ion, spin relaxation of the lanthanides is so fast that their EPR spectra can be observed only in the liquid helium temperature range. In this chapter the EPR properties of each of the lanthanides is briefly summarized, with an emphasis on electron spin relaxation.

All-Inorganic Single-Ion Magnets in Ceramic Matrices

All-inorganic single-ion magnets representing paramagnetic ions incorporated in a crystalline diamagnetic matrix are reviewed. Key results and advantages of this approach in comparison with the common strategy based on molecular metal-organic complexes are considered, and some unsolved problems and future perspectives are discussed.

Induced Ferromagnetic Order of Graphdiyne Semiconductors by Introducing a Heteroatom

To date, the realization of ferromagnetism in two-dimensional carbon semiconductors containing only sp electrons has remained a challenge for spintronics. Here, we utilize the atomic-level functionalization strategy to obtain three carbon matrix materials by accurately introducing different light elements (H, F, Cl) into graphdiyne's benzene ring. Their magnetic and conductive characteristics are thoroughly clarified via physical property measurements and DFT calculations. All of these carbon matrix materials retain their excellent intrinsic semiconductor properties. In particular, compared with the paramagnetism of HsGDY and ClsGDY, a robust ferromagnetic ordering as well as high mobility of up to 320 cm² V^-1 s^-1 was observed in FsGDY, successfully realizing a ferromagnetic semiconductor. Through theory calculations, this unique ferromagnetic coupling can be attributed to the most striking charge transfer between carbon and fluorine atoms, demonstrating the advantages of controllable fabrication. These results not only reveal the important role of atomic-scale doping/substitution in optimizing graphdiyne material but also create new possibilities for manipulating spins and charges in 2D carbon materials.

A reactive coordinatively saturated Mo(iii) complex: exploiting the hemi-lability of tris(tert-butoxy)silanolate ligands

Hemilabile tris(tert-butoxy)silanolate ligands allow stabilizing a mononuclear octahedral Mo(iii) complex without quenching its reactivity towards small molecules (N₂, CO₂, N₂O).

Coordinatively unsaturated Mo(iii) complexes have been identified as highly reactive species able to activate dinitrogen without the need for a sacrificial reducing agent. Here, we report a coordinatively saturated octahedral Mo(iii) complex stabilized by κ²-tris(tert-butoxy)silanolate ligands, which is yet highly reactive towards dinitrogen and small molecules. The combined high stability and activity are ascribed to the dual binding mode of the tris(tert-butoxy)silanolate ligands that allow unlocking a coordination site in the presence of reactive small molecules to promote their activation at low temperatures.

Single-Sites and Nanoparticles at Tailored Interfaces Prepared via Surface Organometallic Chemistry from Thermolytic Molecular Precursors

Heterogeneous catalysts are complex by nature, making particularly difficult to assess the structure of their active sites. Such complexity is inherited in part from their mode of preparation, which typically involves coprecipitation or impregnation of metal salts in aqueous solution, and the associated complex surface chemistries. In this context, surface organometallic chemistry (SOMC) has emerged as a powerful approach to generate well-defined surface species, where the metal sites are introduced by grafting tailored molecular precursors. When combined with thermolytic molecular precursors (TMPs) that can lose their organic moieties quite readily upon thermal treatment, SOMC provides access to supported isolated metal sites with defined oxidation state and nuclearity inherited from the precursor. The resulting surface species bear unusual coordination imposed by the surface that provides them high reactivity in comparison with their molecular precursor. In addition, these molecularly defined species bare strong resemblance with the active sites of supported metal oxides. However, they typically contain a higher proportion of active sites making structure-activity relationship possible. They thus constitute ideal models for this important class of industrial catalysts that are used in numerous applications such as olefin epoxidation (Shell process), olefin metathesis (triolefin process), ethylene polymerization (Phillips catalysts), or propane dehydrogenation (Catofin and related processes). This SOMC/TMP approach can thus provide detailed information about the structure of active sites in industrial catalysts, their mode of initiation and deactivation, as well as the role of the support and specific thermal treatment on the final activity of the catalysts. Nonetheless, these structurally characterized surface sites still exhibit heterogeneous environments borrowed from the support itself, that explain the intrinsic complexity of heterogeneous catalysis. Furthermore, SOMC/TMP can also be used to generate and investigate supported metal nanoparticles. Starting from the well-defined isolated sites, that also contain adjacent surface OH groups, one can graft a second metal and then generate after treatment under hydrogen small and narrowly dispersed alloys or nanoparticles with tailored interfaces that can show improved catalytic performances and are amiable to detailed structure-activity relationships. This approach is illustrated by two case studies: (1) formation of supported copper nanoparticles at tailored interfaces that contain isolated metal sites for the selective hydrogenation of carbon dioxide to methanol, allowing for a detailed understanding of the role of dopants and supports in heterogeneous catalysis, and (2) preparation of highly selective and productive propane dehydrogenation catalysts based on silica-supported Pt _xGa _y alloy. Overall, this Account shows how the combination of SOMC and TMP helps to generate catalysts, particularly suited for elucidating structural characterization of active sites at a molecular-level which in turn enables structure-activity relationship to be drawn. Such detailed information obtained on well-defined catalysts can then be used to understand complex effects observed in industrial catalysts (effects of supports, additives, dopants, etc.), and to extract information that can then be used to improve them in a more rational way.

Eu2+/Eu3+-Based Smart Duplicate Responsive Stimuli and Time-gated Nanohybrid for Optical Recording and Encryption

With the rapid development of information science, it is urgent that memory devices possessing high security, density, and desirable storage ability should be developed. In this work, a smart duplicate response of stimuli has been developed and a time-gate nanohybrid based on variable valence Eu²⁺/Eu³⁺ coencapsulated has been fabricated and acts as active material in the multilevel and multidimensional memory devices. The luminescence lifetime of Eu³⁺ in this nanohybrid gave a stimuli response due to which the energy level of the coordinated ligand could be modulated. Furthermore, by a simple sintering procedure, Eu³⁺ was partially in situ reduced to Eu²⁺ with a short lifetime in the system. And the in situ reduction ensured both Eu³⁺ and Eu²⁺ ions' uniform distribution in the nanohybrid and simultaneous response upon light excitation of variable valence Eu ions. Interestingly, Eu³⁺ revealed a prolonged lifetime because of the presence of an energy-transfer effect of Eu²⁺ → Eu³⁺. Such a nanohybrid had abundant luminescent properties, including the short lifetime of Eu²⁺, the energy transfer from the Eu²⁺ to Eu³⁺ ions, and the stimuli response of the Eu³⁺ lifetimes when exposed to acidic or basic vapor, thus giving birth to interesting recording and encryption performance in spatial-temporal dimensions. We believe that this research will point out a new direction for the future development of multilevel and multidimensional optical recording and encryption materials.

The disclosure of mesoscale behaviour of a 3d-SMM monolayer on Au(111) through a multilevel approach

Here we present a computational study of a full- and a half-monolayer of a Fe₄ single molecule magnet ([Fe₄(L)₂(dpm)₆], where H₃L = 2-hydroxymethyl-2-phenylpropane-1,3-diol and Hdpm = dipivaloylmethane, Fe₄Ph) on an unreconstructed surface of Au(111). This has been possible through the application of an integrated approach, which allows the explicit inclusion of the packing effects in the classical dynamics to be used in a second step in periodic and non-periodic high level DFT calculations. In this way we can obtain access to mesoscale geometrical data and verify how they can influence the magnetic properties of interest of the single Fe₄ molecule. The proposed approach allows to overcome the ab initio state-of-the-art approaches used to study Single Molecule Magnets (SMMs), which are based on the study of one single adsorbed molecule and cannot represent effects on the scale of a monolayer. Indeed, we show here that it is possible to go beyond the computational limitations inherent to the use, for such complex systems, of accurate calculation techniques (e.g. ab initio molecular dynamics) without losing the level of accuracy necessary to gain new detailed insights, hardly reachable at the experimental level. Indeed, long-range and edge effects on the Fe₄ structures and their easy axis of magnetization orientations have been evidenced as their different contributions to the overall macroscopic behavior.