Bimetallic Effect of Single Nanocatalysts Visualized by Super-Resolution Catalysis Imaging

Revealing operando surface defect-dependent electrocatalytic performance of Pt at the subparticle level

Understanding the operando defect-tuning performance of catalysts is critical to establish an accurate structure-activity relationship of a catalyst. Here, with the tool of single-molecule super-resolution fluorescence microscopy, by imaging intermediate CO formation/oxidation during the methanol oxidation reaction process on individual defective Pt nanotubes, we reveal that the fresh Pt ends with more defects are more active and anti-CO poisoning than fresh center areas with less defects, while such difference could be reversed after catalysis-induced step-by-step creation of more defects on the Pt surface. Further experimental results reveal an operando volcano relationship between the catalytic performance (activity and anti-CO ability) and the fine-tuned defect density. Systematic DFT calculations indicate that such an operando volcano relationship could be attributed to the defect-dependent transition state free energy and the accelerated surface reconstructing of defects or Pt-atom moving driven by the adsorption of the CO intermediate. These insights deepen our understanding to the operando defect-driven catalysis at single-molecule and subparticle level, which is able to help the design of highly efficient defect-based catalysts.

Nanocubic cobalt-containing Prussian blue analogue-derived carbon-coated CoFe alloy nanoparticles for noninvasive uric acid sensing

This work describes an electrochemical sensor for the fast noninvasive detection of uric acid (UA) in saliva. The sensing material was based on a cobalt-containing Prussian blue analogue (Na2-xCo[Fe(CN)6]1-y, PCF). By optimizing the ratio of Co and Fe as 1.5 : 1 in PCF (PCF1.5,0), particles with a regular nanocubic morphology were formed. The calcination of PCF1.5,0 produced a carbon-coated CoFe alloy (CCF1.5), which possessed abundant defects and achieved an excellent electrochemical performance. Subsequently, CCF1.5 was modified on a screen-printed carbon electrode (SPCE) to fabricate the electrochemical sensor, CCF1.5/SPCE, which showed a sensitive and selective response toward salivary UA owing to its good conductivity, sufficient surface active sites and efficient catalytic activity. The determination of UA in artificial saliva achieved the wide linear range of 40 nM-30 μM and the low limit of detection (LOD) of 15.3 nM (3σ/s of 3). The performances of the sensor including its reproducibility, stability and selectivity were estimated to be satisfactory. The content of UA in human saliva was determined and the recovery was in the range of 98-107% and the total RSD was 4.14%. The results confirmed the reliability of CCF1.5/SPCE for application in noninvasive detection.

Enhancement Effect Induced by the Second Metal to Promote Ozone Catalytic Oxidation of VOCs

It is a promising research direction to develop catalysts with high stability and ozone utilization for low-temperature ozone catalytic oxidation of VOCs. While bimetallic catalysts exhibit excellent catalytic activity compared with conventional single noble metal catalysts, limited success has been achieved in the influence of the bimetallic effect on the stability and ozone utilization of metal catalysts. Herein, it is necessary to systematically study the enhancement effect in the ozone catalytic reaction induced by the second metal. With a simple continuous impregnation method, a platinum-cerium bimetallic catalyst is prepared. Also highlighted are studies from several aspects of the contribution of the second metal (Ce) to the stability and ozone utilization of the catalysts, including the "electronic effect" and "geometric effect". The synergistic removal rate of toluene and ozone is nearly 100% at 30 °C, and it still shows positive stability after high humidity and a long reaction time. More importantly, the instructive significance, which is the in-depth knowledge of enhanced catalytic mechanism of bimetallic catalysts resulting from a second metal, is provided by this work.

One-Shot Dual-Detection-Based Single-Molecule Super-Resolution Imaging Method for Real-Time Observation of Spatiotemporal Catalytic Activity Variations on the Plasmonic Gold Nanoparticle Surface

Understanding the relationship between the surface properties of a single plasmonic nanoparticle and its catalytic performance is critical for developing highly efficient nanocatalysts. In this study, a one-shot dual-detection-based single-molecule super-resolution imaging method in the evanescent field was developed to observe real-time spatiotemporal catalytic activity on a single plasmonic gold nanoparticle (AuNP) surface. The scattering intensity of AuNPs and the fluorescence of resorufin molecules produced on the AuNP surface were obtained simultaneously to investigate the relationship between nanoparticles and catalytic reactions at a single-molecule level. Chemisorbed adsorbates (i.e., catalytic product and resorufin) changed the electron density of individual AuNPs throughout the catalytic cycle, resulting in the fluctuation of the scattering intensity of individual AuNPs, which was attributed to the electron transfer between reactant resazurin molecules and AuNPs. The increase in the electron density of individual AuNPs affected the catalytic reaction rate. Furthermore, sequential mapping of individual catalytic events at the subdiffraction limit resolution was completed for real-time surface dynamics and spatiotemporal activity variations on the single AuNP surface. The developed method can aid in understanding surface-property-dependent catalytic kinetics and facilitate the development of nanoparticle-based heterogeneous catalysts at subdiffraction limit resolution.

Spatial Distributions of Single-Molecule Reactivity in Plasmonic Catalysis

Plasmonic catalysts have the potential to accelerate and control chemical reactions with light by exploiting localized surface plasmon resonances. However, the mechanisms governing plasmonic catalysis are not simple to decouple. Several plasmon-derived phenomena, such as electromagnetic field enhancements, temperature, or the generation of charge carriers, can affect the reactivity of the system. These effects are convoluted with the inherent (nonplasmonic) catalytic properties of the metal surface. Disentangling these coexisting effects is challenging but is the key to rationally controlling reaction pathways and enhancing reaction rates. This study utilizes super-resolution fluorescence microscopy to examine the mechanisms of plasmonic catalysis at the single-particle level. The reduction reaction of resazurin to resorufin in the presence of Au nanorods coated with a porous silica shell is investigated in situ. This allows the determination of reaction rates with a single-molecule sensitivity and subparticle resolution. By variation of the irradiation wavelength, it is possible to examine two different regimes: photoexcitation of the reactant molecules and photoexcitation of the nanoparticle's plasmon resonance. In addition, the measured spatial distribution of reactivity allows differentiation between superficial and far-field effects. Our results indicate that the reduction of resazurin can occur through more than one reaction pathway, being most efficient when the reactant is photoexcited and is in contact with the Au surface. In addition, it was found that the spatial distribution of enhancements varies, depending on the underlying mechanism. These findings contribute to the fundamental understanding of plasmonic catalysis and the rational design of future plasmonic nanocatalysts.

Au@C/Pt core@shell/satellite supra-nanostructures: plasmonic antenna-reactor hybrid nanocatalysts

Integration of plasmonic nanoantennas with catalytically active reactors in deliberately designed hybrid supra-nanostructures creates a dual-functional materials platform, based upon which precise modulation of catalytic reaction kinetics becomes accomplishable through optical excitations of plasmon resonances. Here, we have developed a multistep synthetic approach that enables us to assemble colloidal Au@C/Pt core@shell/satellite supra-nanostructures, in which the Au core functions as a light-harvesting plasmonic nanoantenna, the Pt satellites act as catalytically active reactors, and the C shell serves as a nanoscale dielectric spacer separating the reactors from the antenna, respectively. By adjusting several synthetic parameters, the size of the Au core, the thickness of the C shell, and the surface coverage of Pt satellites can all be tuned independently. Choosing Pt-catalyzed cascade oxidation of 3,3',5,5'-tetramethylbenzidine in an aerobic aqueous environment as a model reaction, we have systematically studied the detailed kinetic features of the catalytic reactions both in the dark and under visible light illumination over a broad range of reaction conditions, which sheds light on the interplay between plasmonic and catalytic effects in these antenna-reactor nanohybrids. The plasmonic antenna effect can be effectively harnessed to kinetically modulate multiple crucial steps during the cascade reactions, benefiting from plasmon-enhanced interband electronic transitions in the Pt satellites and plasmon-enhanced intramolecular electronic excitations in chromogenic intermediate species. In addition to the plasmonic antenna effect, photothermal transduction derived from plasmonic excitations can also provide significant contributions to the kinetic enhancements under visible light illumination. The knowledge gained from this work serves as important guiding principles for rational design and structural optimization of plasmonic antenna-reactor hybrid nanomaterials, endowing us with enhanced capabilities to kinetically modulate targeted catalytic/photocatalytic molecule-transforming processes through light illumination.

Mechanistic Insights Gained by High Spatial Resolution Reactivity Mapping of Homogeneous and Heterogeneous (Electro)Catalysts

The recent development of high spatial resolution microscopy and spectroscopy tools enabled reactivity analysis of homogeneous and heterogeneous (electro)catalysts at previously unattainable resolution and sensitivity. These techniques revealed that catalytic entities are more heterogeneous than expected and local variations in reaction mechanism due to divergences in the nature of active sites, such as their atomic properties, distribution, and accessibility, occur both in homogeneous and heterogeneous (electro)catalysts. In this review, we highlight recent insights in catalysis research that were attained by conducting high spatial resolution studies. The discussed case studies range from reactivity detection of single particles or single molecular catalysts, inter- and intraparticle communication analysis, and probing the influence of catalysts distribution and accessibility on the resulting reactivity. It is demonstrated that multiparticle and multisite reactivity analyses provide unique knowledge about reaction mechanism that could not have been attained by conducting ensemble-based, averaging, spectroscopy measurements. It is highlighted that the integration of spectroscopy and microscopy measurements under realistic reaction conditions will be essential to bridge the gap between model-system studies and real-world high spatial resolution reactivity analysis.

In situ quantitative single-molecule study of site-specific photocatalytic activity and dynamics on ultrathin g-C3N4 nanosheets

Graphitic carbon nitride (g-C₃N₄) has attracted extensive research attention in recent years due to its unique layered structure, facile synthetic route, visible-light-responsive nature, and excellent photocatalytic performance. However, an insightful investigation of site-specific catalytic activities and kinetics on g-C₃N₄ is still warranted. Here, we fabricated ultrathin g-C₃N₄ nanosheets through thermal exfoliation. The optimized sample exhibits a high specific surface area of 307.35 m² g^-1 and a remarkable H₂ generation activity of 2008 μmol h^-1 g^-1 with an apparent quantum efficiency of 4.62% at λ = 420 nm. Single-molecule fluorescence microscopy was applied for the first time to spatially resolve the reaction heterogeneities with nanometer precision (∼10 nm). The catalytic kinetics (i.e., reactant adsorption, conversion, and product dissociation) and temporal activity fluctuations were in situ quantified at individual structural features (i.e., wrinkles, edges, and basal planes) of g-C₃N₄. It was found that the wrinkle and edge exhibited superior photocatalytic activity due to the intrinsic band modulation, which are 20 times and 14.8 times that of the basal plane, respectively. Moreover, due to the steric effect, the basal plane showed the highest adsorption constant and the lowest direct dissociation constant. Density functional theory (DFT) simulations unveiled the adsorption energies of reactant and product molecules on each structure of g-C₃N₄, which support our experimental results. Such investigation would shed more light on the fundamental understanding of site-specific catalytic dynamics on g-C₃N₄, which benefits the rational design of 2D layered materials for efficient solar-to-chemical energy conversion.

Shape-controllable and kinetically miscible Copper-Palladium bimetallic nanozymes with enhanced Fenton-like performance for biocatalysis

Bimetallic nanozymes have been emerging as essential catalysts due to their unique physicochemical properties from the monometallics. However, the access to optimize catalytic performance is often limited by the thermodynamic immiscibility and also heterogeneity. Thus, we present a one-step coreduction strategy to prepare the miscible Cu–Pd bimetallic nanozymes with controllable shape and homogeneously alloyed structure. The homogeneity is systematically explored and luckily, the homogeneous introduction of Cu successfully endows Cu–Pd bimetallic nanozymes with enhanced Fenton-like efficiency. Density functional theory (DFT) theoretical calculation reveals that Cu–Pd bimetallic nanozymes exhibit smaller d-band center compared with Pd nanozymes. Easier adsorption of H₂O₂ molecular contributed by the electronic structure of Cu significantly accelerate the catalytic process together with the strong repulsive interaction between H atom and Pd atom. In vitro cytotoxicity and intracellular ROS generation performance reveal the potential for in vivo biocatalysis. The strategy to construct kinetically miscible Cu–Pd bimetallic nanozymes will guide the development of bimetallic catalysts with excellent Fenton-like efficiency for biocatalytic nanomedicine.

Correlating the orbital overlap area and vibrational frequency shift of an isocyanide moiety adsorbed on Pt and Pd covered Au(111) surfaces

Orbital interactions between adsorbed molecules and the underlying metal surfaces play critical roles in a wide range of surface and interfacial processes. Establishing a correlation between an experimental observable (e.g., vibrational frequency shift of the adsorbed molecule) and the orbital interactions is of vital importance. Herein, theoretical calculations are used to investigate the vibrational frequency shift of phenyl isocyanide molecules as a probe molecule adsorbed on mono- and bi-layer Pt and Pd covered Au(111) surfaces and Pd₂Au₄ and Pt₂Au₄ clusters. By analyzing the density of states (DOS) of the adsorption system, we show that the orbital overlap area of d electronic DOS with a molecular σ or π* orbital, particularly their ratio (R_d-σ/d-π*), can be a meaningful descriptor to explain the frequency shift of the CN moiety. This hypothesis has been verified by simulations for phenyl isocyanide with electron donating NH₂- and withdrawing CF₃- substituent groups, formonitrile and carbon monoxide. Quasi-linear dependence of the frequency shift on R_d-σ/d-π* is observed for both the red and blue shift regions. Our findings build up on previous notions of electronic interactions, which will provide a more quantitative and solid footing to understand and analyze the frequency shift of adsorbed molecules on metal surfaces and the related electronic interactions and catalytic properties.

Single-Molecule Imaging of Reactive Oxygen Species on a Semiconductor Nano-Heterostructure for Understanding Photocatalytic Heterogeneity in Aqueous

We constructed a single-molecule fluorescence imaging technique to monitor the spatiotemporal distribution of the hydroxyl radical (•OH) on TiO₂-attached multiwalled carbon nanotubes (TiO₂-MWCNTs) in aqueous. We found the heterogeneous distribution of •OH is closely related to the composition and heterostructure of the catalysts. The dynamic •OH production rate was evaluated by counting the single-molecule fluorescent bursts. We further confirmed the production of •OH on TiO₂-MWCNTs mainly occurred via electron reduction during the aqueous photocatalytic process. Our study reveals the mechanism of reactive oxygen species involved photocatalytic reaction and guides the design of advanced semiconductor photocatalysts.

Electrocatalytic degradation of sulfamethylthiadiazole by GAC@Ni/Fe three-dimensional particle electrode

In this work, GAC@Ni/Fe particle electrodes were prepared and employed for the degradation of sulfamethylthiadiazole (SMT) by three-dimensional electrocatalytic technology. The effects of particle electrode bi-metal loading ratio, cell voltage, particle electrode dosage, electrode plate spacing, and SMT initial concentration on SMT removal were studied. In addition, GAC@Ni/Fe particle electrode was analyzed by the scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectrometer (XPS), and Fourier transform infrared spectrometer (FTIR) to characterize which indicated that a significant amount of iron-nickel oxide was formed on the surface of GAC@Ni/Fe particle electrode. The results indicated that when the nickel-iron loading ratio is 1:1, the SMT removal effect is the best, and the removal rate can reach 90.89% within 30 min. Compared with the granular activated carbon without bimetal, the removal efficiency is increased by 37.58%. The degradation of SMT in the GAC@Ni/Fe particle three-dimensional electrode reactor is the joint result of both direct oxidation and indirect oxidation. The contribution rates of direct oxidation of anode and particle electrode and indirect oxidation of ·OH in the degradation are 32%, 27%, and 41%, respectively. Based on the intermediate detected by ultra-high liquid chromatography and the calculation of bond energy of SMT molecule by Gauss software, the degradation pathway of SMT in the GAC@Ni/Fe three-dimensional electrode reactor is proposed. This research provides a green, healthy, and effective method for removing sulfonamide micro-polluted wastewater.

Can super-resolution microscopy become a standard characterization technique for materials chemistry?

The characterization of newly synthesized materials is a cornerstone of all chemistry and nanotechnology laboratories. For this purpose, a wide array of analytical techniques have been standardized and are used routinely by laboratories across the globe. With these methods we can understand the structure, dynamics and function of novel molecular architectures and their relations with the desired performance, guiding the development of the next generation of materials. Moreover, one of the challenges in materials chemistry is the lack of reproducibility due to improper publishing of the sample preparation protocol. In this context, the recent adoption of the reporting standard MIRIBEL (Minimum Information Reporting in Bio-Nano Experimental Literature) for material characterization and details of experimental protocols aims to provide complete, reproducible and reliable sample preparation for the scientific community. Thus, MIRIBEL should be immediately adopted in publications by scientific journals to overcome this challenge. Besides current standard spectroscopy and microscopy techniques, there is a constant development of novel technologies that aim to help chemists unveil the structure of complex materials. Among them super-resolution microscopy (SRM), an optical technique that bypasses the diffraction limit of light, has facilitated the study of synthetic materials with multicolor ability and minimal invasiveness at nanometric resolution. Although still in its infancy, the potential of SRM to unveil the structure, dynamics and function of complex synthetic architectures has been highlighted in pioneering reports during the last few years. Currently, SRM is a sophisticated technique with many challenges in sample preparation, data analysis, environmental control and automation, and moreover the instrumentation is still expensive. Therefore, SRM is currently limited to expert users and is not implemented in characterization routines. This perspective discusses the potential of SRM to transition from a niche technique to a standard routine method for material characterization. We propose a roadmap for the necessary developments required for this purpose based on a collaborative effort from scientists and engineers across disciplines.

Hole utilization in solar hydrogen production

In photochemical production of hydrogen from water, the hole-mediated oxidation reaction is the rate-determining step. A poor solar-to-hydrogen efficiency is usually related to a mismatch between the internal quantum efficiency of photon-induced hole generation and the apparent quantum yield of hydrogen. This waste of photogenerated holes is unwanted yet unavoidable. Although great progress has been made, we are still far away from the required level of dexterity to deal with the associated challenges of wasted holes and its consequential chemical effects that have placed one of the greatest bottlenecks in attaining high solar-to-hydrogen efficiency. A critical assessment of the hole and its related phenomena in solar hydrogen production would, therefore, pave the way moving forward. In this regard, we focus on the contextual and conceptual understanding of the dynamics and kinetics of photogenerated holes and its critical role in driving redox reactions, with the objective of guiding future research. The main reasons behind and consequences of unused holes are examined and different approaches to improve overall efficiency are outlined. We also highlight yet unsolved research questions related to holes in solar fuel production.

Particle Impact Electrochemistry

Experiments involving collisions between a single entity and the electrode surface have become an active area of research. The electrochemical contribution of individual nanoparticles (NPs), enzymes, and other entities, such as aggregates or agglomerates, can be determined using particle impact experiments. Destructive nanoimpact experiments of materials, such as Ag, and the electrocatalytic amplification (ECA) are used to detect the NP/electrode interactions. This review covers the seminal work, critical theoretical studies, and some recent applications. The applications to electrocatalysis include measurements of electron transfer rate constants on individual nanoparticles. Applications in analytical chemistry have allowed the detection of nonelectroactive species by detecting the collisions of soft materials, e.g. micellar suspensions and proteins have increased the technique's analytical possibilities. With ECA, NPs can be used as tags for the electrochemical detection of bioanalytes such as DNA, proteins, and liposomes. The theory of ECA collisions, including frequency of collision and the size of the electrochemical current transients, are also covered. For nanoimpacts, the charge measured during a NP electrolysis, such as Ag NP, is used to detect the NP. Measurements of NP diameter are possible, but limitations to this analysis are covered. The electron transfer studies to the electrolysis of Ag and of metal oxides are discussed. Finally, key experimental instrumentations are discussed, including instrumentation techniques for the small currents inherent to single NP measurement. The effect of filtering, instrumentations rise time, and sampling frequency are also covered.

Super-Resolution Electrogenerated Chemiluminescence Microscopy for Single-Nanocatalyst Imaging

Electrogenerated chemiluminescence microscopy (ECLM) provides a real-time imaging approach to visualize the surface-dependent catalytic activity of nanocatalysts, which helps to rationalize the design of catalysts. In this study, we first propose super-resolution ECLM that could measure the facet- and site-specific activities of a single nanoparticle with nanometer resolution. The stochastic nature of the ECL emission makes the generation of photons obey Poisson statistics, which fits the requirement of super-resolution radial fluctuation (SRRF). By processing an SRRF algorithm, the spatial resolution of ECL images achieved ca. 100 nm, providing more abundant details on electrocatalytic reactivities at the subparticle level. Beyond conventional wide-field ECL imaging, super-resolution ECLM provided the spatial distribution of catalytic activities at a Au nanorod and nanoplate with scales of a few hundred nanometers. It helped uncover the facet- and defect-dependent surface activity, as well as the dynamic fluctuation of reactivity patterns on single nanoparticles. The super-resolution ECLM provides high spatiotemporal resolution, which shows great potential in the field of catalysis, biological imaging, and single-entity analysis.

Single Entity Behavior of CdSe Quantum Dot Aggregates During Photoelectrochemical Detection

We demonstrate that colloidal quantum dots of CdSe and CdSe/ZnS are detected during the photooxidation of MeOH, under broad spectrum illumination (250 mW/cm²). The stepwise photocurrent vs. time response corresponds to single entities adsorbing to the Pt electrode surface irreversibly. The adsorption/desorption of the QDs and the nature of the single entities is discussed. In suspensions, the QDs behave differently depending on the solvent used to suspend the materials. For MeOH, CdSe is not as stable as CdSe/ZnS under constant illumination. The photocurrent expected for single QDs is discussed. The value of the observed photocurrents, > 1 pA is due to the formation of agglomerates consistent with the collision frequency and suspension stability. The observed frequency of collisions for the stepwise photocurrents is smaller than the diffusion-limited cases expected for single QDs colliding with the electrode surface. Dynamic light scattering and scanning electron microscopy studies support the detection of aggregates. The results indicate that the ZnS layer on the CdSe/ZnS material facilitates the detection of single entities by increasing the stability of the nanomaterial. The rate of hole transfer from the QD aggregates to MeOH outcompetes the dissolution of the CdSe core under certain conditions of electron injection to the Pt electrode and in colloidal suspensions of CdSe/ZnS.

Tuning Electrogenerated Chemiluminescence Intensity Enhancement Using Hexagonal Lattice Arrays of Gold Nanodisks

Electrogenerated chemiluminescence (ECL) microscopy shows promise as a technique for mapping chemical reactions on single nanoparticles. The technique's spatial resolution is limited by the quantum yield of the emission and the diffusive nature of the ECL process. To improve signal intensity, ECL dyes have been coupled with plasmonic nanoparticles, which act as nanoantennas. Here, we characterize the optical properties of hexagonal arrays of gold nanodisks and how they impact the enhancement of ECL from the coreaction of tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate and tripropylamine. We find that varying the lattice spacing results in a 23-fold enhancement of ECL intensity because of increased dye-array near-field coupling as modeled using finite element method simulations.

Super-Resolution Mapping of a Chemical Reaction Driven by Plasmonic Near-Fields

Plasmonic nanoparticles have recently emerged as promising photocatalysts for light-driven chemical conversions. Their illumination results in the generation of highly energetic charge carriers, elevated surface temperatures, and enhanced electromagnetic fields. Distinguishing between these often-overlapping processes is of paramount importance for the rational design of future plasmonic photocatalysts. However, the study of plasmon-driven chemical reactions is typically performed at the ensemble level and, therefore, is limited by the intrinsic heterogeneity of the catalysts. Here, we report an in situ single-particle study of a fluorogenic chemical reaction driven solely by plasmonic near-fields. Using super-resolution fluorescence microscopy, we map the position of individual product molecules with an ∼30 nm spatial resolution and demonstrate a clear correlation between the electric field distribution around individual nanoparticles and their super-resolved catalytic activity maps. Our results can be extended to systems with more complex electric field distributions, thereby guiding the design of future advanced photocatalysts.

Quantitative Single-Particle Fluorescence Imaging Elucidates Semiconductor Shell Influence on Ag@TiO2 Photocatalysis

The understanding of the structure-reactivity relationship is helpful for the nanocatalyst (NC) design. However, though precisely parse, this information is challenging due to the heterogeneity of NCs and the complex mechanism of energetic charge carrier (e^-/h⁺ pairs) generation and transfer within the catalysts upon light irradiation. Here, the effect of the semiconductor shell on the photocatalytic redox reaction is probed at the single-Ag@TiO₂ NC level with single-molecule imaging. By engineering the TiO₂ shell thickness, catalytic activities of the NCs are precisely controlled and quantitatively measured to show a parabolic-like distribution with increasing TiO₂ thickness. Besides, the varied activity among different NCs and the dynamic activity fluctuation of single NCs during continuous redox conversion are observed. Mathematical analysis indicates that the TiO₂ layer affects the activity of the core-shell NCs by simultaneously affecting the fate of photo-induced e^-/h⁺ pairs and hot electrons generated at the Ag core. This work sheds light on molecular-scale elucidation of the impact of metal-semiconductor NC structures on their reactivities.

How the anisotropy of surface oxide formation influences the transient activity of a surface reaction

Scanning photoelectron microscopy (SPEM) and photoemission electron microscopy (PEEM) allow local surface analysis and visualising ongoing reactions on a µm-scale. These two spatio-temporal imaging methods are applied to polycrystalline Rh, representing a library of well-defined high-Miller-index surface structures. The combination of these techniques enables revealing the anisotropy of surface oxidation, as well as its effect on catalytic hydrogen oxidation. In the present work we observe, using locally-resolved SPEM, structure-sensitive surface oxide formation, which is summarised in an oxidation map and quantitatively explained by the novel step density (SDP) and step edge (SEP) parameters. In situ PEEM imaging of ongoing H₂ oxidation allows a direct comparison of the local reactivity of metallic and oxidised Rh surfaces for the very same different stepped surface structures, demonstrating the effect of Rh surface oxides. Employing the velocity of propagating reaction fronts as indicator of surface reactivity, we observe a high transient activity of Rh surface oxide in H₂ oxidation. The corresponding velocity map reveals the structure-dependence of such activity, representing a direct imaging of a structure-activity relation for plenty of well-defined surface structures within one sample.

Surface oxide formation under reaction conditions may change the catalytic activity of a catalyst. Here, the authors explore the effect of atomic structure of Rh surfaces on the surface oxide formation and its influence on catalytic activity in hydrogen oxidation, revealing a high transient activity.

Single Particle Approaches to Plasmon-Driven Catalysis

Plasmonic nanoparticles have recently emerged as a promising platform for photocatalysis thanks to their ability to efficiently harvest and convert light into highly energetic charge carriers and heat. The catalytic properties of metallic nanoparticles, however, are typically measured in ensemble experiments. These measurements, while providing statistically significant information, often mask the intrinsic heterogeneity of the catalyst particles and their individual dynamic behavior. For this reason, single particle approaches are now emerging as a powerful tool to unveil the structure-function relationship of plasmonic nanocatalysts. In this Perspective, we highlight two such techniques based on far-field optical microscopy: surface-enhanced Raman spectroscopy and super-resolution fluorescence microscopy. We first discuss their working principles and then show how they are applied to the in-situ study of catalysis and photocatalysis on single plasmonic nanoparticles. To conclude, we provide our vision on how these techniques can be further applied to tackle current open questions in the field of plasmonic chemistry.

Ru and Ni—Privileged Metal Combination for Environmental Nanocatalysis

Privileged structures is a term that is used in drug design to indicate a fragment that is popular in the population of drugs or drug candidates that are in the application or investigation phases, respectively. Privileged structures are popular motifs because they generate efficient drugs. Similarly, some elements appear to be more efficient and more popular in catalyst design and development. To indicate this fact, we use here a term privileged metal combination. In particular, Ru-based catalysts have paved a bumpy road in a variety of commercial applications from ammonia synthesis to carbon (di)oxide methanation. Here, we review Ru/Ni combinations in order to specifically find applications in environmental nanocatalysis and more specifically in carbon (di)oxide methanation. Synergy, ensemble and the ligand effect are theoretical foundations that are used to explain the advantages of multicomponent catalysis. The economic effect is another important issue in blending metal combinations. Low temperature and photocatalytic processes can be indicated as new tendencies in carbon (di)oxide methanation. However, due to economics, future industrial developments of this reaction are still questionable.

Optical writing and single molecule reading of photoactivatable and silver nanoparticle-enhanced fluorescence

We designed a hybrid nanoparticle-molecular system composed of silver nanostructures (AgNP) and a fluorogenic boron dipyrromethene (BODIPY) that can be selectively activated by UVA or UVC light in the presence of an appropriate photoacid generator (PAG). Light irradiation of the PAG encourages the release of p-toluenesulfonic, triflic or hydrobromic acid, any of which facilitate optical 'writing' by promoting the formation of a fluorescent species. Metal-enhanced fluorescence (MEF) by AgNP was achieved through rational design of the nano-molecular system in accordance with the principles of radiative decay engineering. In addition to increasing signal to noise, AgNP permitted shorter reaction times and low irradiance - all of which have important implications for applications of fluorescence activation in portable fluorescence patterning, bioimaging and super-resolution microscopy. Single molecule fluorescence microscopy provided unique insights into the MEF mechanism which were hidden by ensemble-averaged measurements, demonstrating that single molecule 'reading' is a valuable tool for characterizing particle-molecule interactions such as those responsible for the relative contributions of increased excitation and plasmophoric emission toward overall MEF. This work represents a step forward in the contemporary design of synergistic nano-molecular systems, and showcases the advantage of fusion between classic spectroscopic techniques and single molecule methods in terms of improved quantitative understanding of fluorophore-nanoparticle interactions, and how these interactions can be exploited to the fullest extent possible.

Plasmon-Driven Modulation of Reaction Pathways of Individual Pt-Modified Au Nanorods

Understanding the underlying kinetic mechanism of plasmon-enhanced catalysis is important for designing optimized bimetal nanostructures. Here, we characterize product formation rate at both the single-particle and ensemble level. The single-particle measurement allows us to reveal the underlying catalytic kinetic mechanisms of a bimetal nanostructure. Combining this with ensemble observations of two different catalytic behaviors of this catalyst with and without illumination shows that energetic charge carriers induce a transition from a competitive reactant adsorption type to a noncompetitive adsorption type, which leads to the suppression of catalytic rate decay at high reactant concentration. Theoretical modeling as well as analysis of hole acceptability of scavengers on Pt and Au surfaces indicates that the Pt light absorptivity is enhanced near Au and the energetic charges may form directly from the Pt part of the Au-Pt nanostructure. The presented study deepens our understanding of plasmon-enhanced catalysis by bimetal nanostructures.

Overcoming immiscibility toward bimetallic catalyst library

Bimetallics are emerging as important materials that often exhibit distinct chemical properties from monometallics. However, there is limited access to homogeneously alloyed bimetallics because of the thermodynamic immiscibility of the constituent elements. Overcoming the inherent immiscibility in bimetallic systems would create a bimetallic library with unique properties. Here, we present a nonequilibrium synthesis strategy to address the immiscibility challenge in bimetallics. As a proof of concept, we synthesize a broad range of homogeneously alloyed Cu-based bimetallic nanoparticles regardless of the thermodynamic immiscibility. The nonequilibrated bimetallic nanoparticles are further investigated as electrocatalysts for carbon monoxide reduction at commercially relevant current densities (>100 mA cm^-2), in which Cu_0.9Ni_0.1 shows the highest multicarbon product Faradaic efficiency of ~76% with a current density of ~93 mA cm^-2. The ability to overcome thermodynamic immiscibility in multimetallic synthesis offers freedom to design and synthesize new functional nanomaterials with desired chemical compositions and catalytic properties.

Dark-field spectroscopy: development, applications and perspectives in single nanoparticle catalysis

Dark-field microscopy (DFM) is an effective method to detect the scattering signal from single nanoparticles. This technique could break through the 200 nm limit resolution of ordinary optical microscopes. It even can observe the submicron particles of 20-200 nm. Moreover, from 2000, DFM was coupled with a spectrometer to measure the scattering spectra of single silver nanoparticles. Then, dark-field spectroscopy becomes a very important plasmon spectroscopy technique for single nanoparticles. Usually, plasmonic nanoparticles are the major research target, because they have unique optical properties due to their localized surface plasmon resonance (LSPR), which can be influenced by many factors, such as composition, size, morphology, the refractive index of the surrounding medium etc. When surface chemical reactions occur on a single nanoparticle, it could induce the variation of these factors. Then, the structure-activity relationship for these nanoparticle catalysts can be studied at a single nanoparticle level and in real time. This review mainly summarized the development of dark-field spectroscopy, spectrometers, light sources, and other accessories, which greatly improved the imaging capabilities of dark-field spectroscopy. Meanwhile, the applications of dark-field spectroscopy in single-particle catalysis such as chemocatalysis, photocatalysis, electrocatalysis and biocatalysis are also reviewed.

Innate glycosidic activity in metallic implants for localized synthesis of antibacterial drugs

The unexpected discovery presented herein is that industrialized metallic wires can perform conversion of the glucuronide prodrugs with ensuing antibacterial effects.

In-situ observation of plasmon-controlled photocatalytic dehydrogenation of individual palladium nanoparticles

Plasmonic nanoparticle catalysts offer improved light absorption and carrier transport compared to traditional photocatalysts. However, it remains unclear how plasmonic excitation affects multi-step reaction kinetics and promotes site-selectivity. Here, we visualize a plasmon-induced reaction at the sub-nanoparticle level in-situ and in real-time. Using an environmental transmission electron microscope combined with light excitation, we study the photocatalytic dehydrogenation of individual palladium nanocubes coupled to gold nanoparticles with sub-2 nanometer spatial resolution. We find that plasmons increase the rate of distinct reaction steps with unique time constants; enable reaction nucleation at specific sites closest to the electromagnetic hot spots; and appear to open a new reaction pathway that is not observed without illumination. These effects are explained by plasmon-mediated population of excited-state hybridized palladium-hydrogen orbitals. Our results help elucidate the role of plasmons in light-driven photochemical transformations, en-route to design of site-selective and product-specific photocatalysts.

Ultrathin Metallic Nanowire-Based Architectures as High-Performing Electrocatalysts

Fuel cells (FCs) convert chemical energy into electricity through electrochemical reactions. They maintain desirable functional advantages that render them as attractive candidates for renewable energy alternatives. However, the high cost and general scarcity of conventional FC catalysts largely limit the ubiquitous application of this device configuration. For example, under current consumption requirements, there is an insufficient global reserve of Pt to provide for the needs of an effective FC for every car produced. Therefore, it is absolutely necessary in the future to replace Pt either completely or in part with far more plentiful, abundant, cheaper, and potentially less toxic first row transition metals, because the high cost-to-benefit ratio of conventional catalysts is and will continue to be a major limiting factor preventing mass commercialization. We and other groups have explored a number of nanowire-based catalytic architectures, which are either Pt-free or with reduced Pt content, as an energy efficient solution with improved performance metrics versus conventional, currently commercially available Pt nanoparticles that are already well established in the community. Specifically, in this Perspective, we highlight strategies aimed at the rational modification of not only the physical structure but also the chemical composition as a means of developing superior electrocatalysts for a number of small-molecule-based anodic oxidation and cathodic reduction reactions, which underlie the overall FC behavior. In particular, we focus on efforts to precisely, synergistically, and simultaneously tune not only the size, morphology, architectural motif, surface chemistry, and chemical composition of the as-generated catalysts but also the nature of the underlying support so as to controllably improve performance metrics of the hydrogen oxidation reaction, the methanol oxidation reaction, the ethanol oxidation reaction, and the formic acid oxidation reaction, in addition to the oxygen reduction reaction.

Correlating structural dynamics and catalytic activity of AgAu nanoparticles with ultrafast spectroscopy and all-atom molecular dynamics simulations

Electron–phonon coupling times, equilibrium structures and surface segregation as a function of hollow core–shell AgAu nanoparticle composition.