Pendant Hydrogen-Bond Donors in Cobalt Catalysts Independently Enhance CO2 Reduction

Long-range electrostatic effects from intramolecular Lewis acid binding influence the redox properties of cobalt-porphyrin complexes

A CoII-porphyrin complex (1) with an appended aza-crown ether for Lewis acid (LA) binding was synthesized and characterized. NMR spectroscopy and electrochemistry show that cationic group I and II LAs (i.e., Li+, Na+, K+, Ca2+, Sr2+, and Ba2+) bind to the aza-crown ether group of 1. The binding constant for Li+ is comparable to that observed for a free aza-crown ether. LA binding causes an anodic shift in the CoII/CoI couple of between 10 and 40 mV and also impacts the CoIII/CoII couple. The magnitude of the anodic shift of the CoII/CoI couple varies linearly with the strength of the LA as determined by the pKa of the corresponding metal-aqua complex, with dications giving larger shifts than monocations. The extent of the anodic shift of the CoII/CoI couple also increases as the ionic strength of the solution decreases. This is consistent with electric field effects being responsible for the changes in the redox properties of 1 upon LA binding and provides a novel method to tune the reduction potential. Density functional theory calculations indicate that the bound LA is 5.6 to 6.8 Å away from the CoII ion, demonstrating that long-range electrostatic effects, which do not involve changes to the primary coordination sphere, are responsible for the variations in redox chemistry. Compound 1 was investigated as a CO2 reduction electrocatalyst and shows high activity but rapid decomposition.

Kinetic isotope effect offers selectivity in CO2 reduction

A binuclear Ni complex with N,O donors catalyzes CO2 reduction via its Ni(I) state. The product distribution when H2O is used as a proton source shows similar yields for CO, HCOOH and H2. However, when D2O is used, the product distribution shows a ∼65% selectivity for HCOOH. In situ FTIR indicates that the reaction involves a Ni-COO* and a Ni-CO intermediate. Differences in H/D KIEs on different protonation pathways determine the selectivity of CO2 reduction.

Electrocatalytic Reduction of CO2 to CO by Molecular Cobalt-Polypyridine Diamine Complexes

Cobalt complexes have previously been reported to exhibit high faradaic efficiency in reducing CO2 to CO. Herein, we synthesized capsule-like cobalt-polypyridine diamine complexes [Co(L1)](BF4)2 (1) and [Co(L2) (CH3CN)](BF4)2 (2) as catalysts for the electrocatalytic reduction of CO2. Under catalytic conditions, complexes 1 and 2 demonstrated the electrocatalytic reduction of CO2 to CO in the presence or absence of CH3OH as a proton source. Experimental and computational studies revealed that complexes 1 and 2 undergo two consecutive reversible one-electron reductions on the cobalt core, followed by the addition of CO2 to form a metallocarboxylate intermediate [CoII(L)-CO22-]0. This crucial reaction intermediate, which governs the catalytic cycle, was successfully detected using high resolution mass spectrometry (HRMS). In situ Fourier-transform infrared spectrometer (FTIR) analysis showed that methanol can enhance the rate of carbon-oxygen bond cleavage of the metallocarboxylate intermediate. DFT studies on [CoII(L)-CO22-]0 have suggested that the doubly reduced species attacks CO2 on the C atom through the dz2 orbital, while the interaction with CO2 is further stabilized by the π interaction between the metal dxz or dxz orbital with p orbitals on the O atoms. Further reductions generate a metal carbonyl intermediate [CoI(L)-CO]+, which ultimately releases CO.

Carbon dioxide capture and functionalization by bis(N-heterocyclic carbene)-borylene complexes

Derivatives of free monocoordinated borylenes have attracted considerable interest due to their ability to exhibit transition-metal-like reactivity, in particular small molecules capture. However, such complexes are rare as the formation is either endergonic, or the resulting adduct is a transient intermediate that is prone to reaction. Here, we present the synthesis of two bis(N-heterocyclic carbene)-borylene complexes capable of capturing and functionalizing carbon dioxide. The capture and subsequent functionalization of CO2 by the bis(NHC)-disilylamidoborylene 1 is demonstrated by the formation of the bis(NHC)-isocyanatoborylene-carbon dioxide complex 3. Reversible capture of CO2 is observed using the bis(NHC)-mesitylborylene 2, and the persistent bis(NHC)-mesitylborylene-carbon dioxide adduct 4 can be stabilized by hydrogen bonding with boric acid. The reactions of 4 with ammonia-borane and aniline demonstrate that the captured CO2 can be further functionalized.

A comparison between 2D and 3D cobalt-organic framework as catalysts for electrochemical CO2 reduction

Electrocatalytic CO2 reduction, as an effective way to reduce the CO2 concentration, has gained attention. In this study, we prepared ZIF-67 nanoparticles and nanosheets and investigated them as electrocatalysts for CO2 reduction. It was found that ZIF-67 nanosheets, because of their two-dimensional morphologies, provide more under-coordinated cobalt nodes and have lower overpotentials for both hydrogen evolution and CO2 reduction reactions. Also, the rate-determining step for hydrogen evolution changes from Volmer for ZIF-67 nanoparticles to Hyrovsky for ZIF-67 nanosheets. Also, the presence of Mg2+ ions in solution causes more facile CO2 reduction, especially for ZIF-67 nanosheets.

Electrocatalytic CO2 Reduction: Monitoring of Catalytically Active, Downgraded, and Upgraded Cobalt Complexes

The premise of most studies on the homogeneous electrocatalytic CO2 reduction reaction (CO2RR) is a good understanding of the reaction mechanisms. Yet, analyzing the reaction intermediates formed at the working electrode is challenging and not always attainable. Here, we present a new, general approach to studying the reaction intermediates applied for CO2RR catalyzed by a series of cobalt complexes. The cobalt complexes were based on the TPA-ligands (TPA = tris(2-pyridylmethyl)amine) modified by amino groups in the secondary coordination sphere. By combining the electrochemical experiments, electrochemistry-coupled electrospray ionization mass spectrometry, with density functional theory (DFT) calculations, we identify and spectroscopically characterize the key reaction intermediates in the CO2RR and the competing hydrogen-evolution reaction (HER). Additionally, the experiments revealed the rarely reported in situ changes in the secondary coordination sphere of the cobalt complexes by the CO2-initiated transformation of the amino substituents to carbamates. This launched an even faster alternative HER pathway. The interplay of three catalytic cycles, as derived from the experiments and supported by the DFT calculations, explains the trends that cobalt complexes exhibit during the CO2RR and HER. Additionally, this study demonstrates the need for a molecular perspective in the electrocatalytic activation of small molecules efficiently obtained by the EC-ESI-MS technique.

Bioinspired motifs in proton and CO2 reduction with 3d-metal polypyridine complexes

The synthesis of active and efficient catalysts for solar fuel generation is nowadays of high relevance for the scientific community, but at the same time poses great challenges. Critical requirements are mainly associated with the kinetic barriers due to the multi-proton and multi-electron nature of the hydrogen evolution reaction (HER) and the CO2 reduction reaction (CO2RR) as well as to selectivity issues. In this regard, natural enzymes can be a source of inspiration for the design of effective and selective catalysts to target such fundamental reactions. In this Feature Article we review some recent works on molecular catalysts for both the HER and the CO2RR performed in our labs and other research teams which mainly address (i) the role of redox non-innocent ligands, to lower the overpotential for catalysis and control the selectivity, and (ii) the role of internal relays, to assist formation of catalytic intermediates via intramolecular routes. The selected exemplars have been chosen to emphasize that, although the molecular structures and the synthetic motifs are different from those of the active sites of natural enzymes, many affinities in terms of catalytic mechanism and functionality are instead present, which account for the observed remarkable performances under operative conditions. The data discussed herein thus demonstrate the great potential and the privileged role of molecular catalysts towards the design and construction of hybrid photochemical systems for solar energy conversion into fuels.

Photocatalytic Reduction of CO2 into CO with Cyclometalated Pt(II) Complexes of N^C^N Pincer Dipyridylbenzene Ligands: A DFT Study

In this work, density functional theory (DFT) calculations were employed to study the photocatalytic reduction of CO2 into CO using a series of Pt(II) square planar complexes with the general formula [Pt(5-R-dpb)Cl] (dpb = 1,3-di(2-pyridyl)benzene anion, R = H, N,N-dimethylaniline,T thiophene, diazaborinine). The CO2-into-CO conversion process is thought to proceed via two main steps, namely the photocatalytic/reduction step and the main catalytic step. The simulated absorption spectra exhibit strong bands in the range 280-460 nm of the UV-Vis region. Reductive quenching of the T1 state of the complexes under study is expected to be favorable since the calculated excited state redox potentials for the reaction with sacrificial electron donors are highly positive. The redox potentials reveal that the reductive quenching of the T1 state, important to the overall process, could be modulated by suitable changes in the N^C^N pincer ligands. The CO2 fixation and activation by the three coordinated Pt(II) catalytically active species are predicted to be favorable, with the Pt-CO2 bond dissociation energies D0 in the range of -36.9--10.3 kcal/mol. The nature of the Pt-CO2 bond of the Pt(II) square planar intermediates is complex, with covalent, hyperconjugative and H-bonding interactions prevailing over the repulsive electrostatic interactions. The main catalytic cycle is estimated to be a favorable exergonic process.

Sulphur vs NH Group: Effects on the CO2 Electroreduction Capability of Phenylenediamine-Cp Cobalt Complexes

The cobalt complex (I) with cyclopentadienyl and 2-aminothiophenolate ligands was investigated as a homogeneous catalyst for electrochemical CO₂ reduction. By comparing its behavior with an analogous complex with the phenylenediamine (II), the effect of sulfur atom as a substituent has been evaluated. As a result, a positive shift of the reduction potential and the reversibility of the corresponding redox process have been observed, also suggesting a higher stability of the compound with sulfur. Under anhydrous conditions, complex I showed a higher current enhancement in the presence of CO₂ (9.41) in comparison with II (4.12). Moreover, the presence of only one -NH group in I explained the difference in the observed increases on the catalytic activity toward CO₂ due to the presence of water, with current enhancements of 22.73 and 24.40 for I and II, respectively. DFT calculations confirmed the effect of sulfur on the lowering of the energy of the frontier orbitals of I, highlighted by electrochemical measurements. Furthermore, the condensed Fukui function f ^- values agreed very well with the current enhancement observed in the absence of water.

Proton Transfer Dynamics-Mediated CO2 Electroreduction

Electrochemical CO₂ reduction reaction (CO₂ RR) is crucial to addressing environmental crises and producing chemicals. Proton activation and transfer are essential in CO₂ RR. To date, few research reviews have focused on this process and its effect on catalytic performance. Recent studies have demonstrated ways to improve CO₂ RR by regulating proton transfer dynamics. This Concept highlights the use of regulating proton transfer dynamics to enhance CO₂ RR for the target product and discusses modulation strategies for proton transfer dynamics and operative mechanisms in typical systems, including single-atom catalysts, molecular catalysts, metal heterointerfaces, and organic-ligand modified metal catalysts. Characterization methods for proton transfer dynamics during CO₂ RR are also discussed, providing powerful tools for the hydrogen-involving electrochemical study. This Concept offers new insights into the CO₂ RR mechanism and guides the design of efficient CO₂ RR systems.

Two-Electron-Induced Reorganization of Cobalt Coordination and Metal-Ligand Cooperative Redox Shifting Co(I) Reactivity toward CO2 Reduction

Electrochemical reorganization of complex structures is directly related to catalytic reactivity; thus, the geometric changes of catalysts induced by electron transfer should be considered to scrutinize the reaction mechanism. Herein, we studied electron-induced reorganization patterns of six-coordinate Co complexes with neutral N-donor ligands. Upon two-electron transfer into a Co center enclosed within a bulky π-acceptor ligand, the catalytic site exhibited different reorganization patterns depending on the ligand characteristics. While a bipyridyl ligand released Co-bound solvent (CH₃CN) to open a reaction site, a phenanthroline ligand caused Co-N_arm (side "arm" of NNN-ligand) bond dissociation. The first electron transfer occurred in the Co(II/I) reduction step and the second electron entered the bulky π-acceptor, of which redox steps were assigned from cyclic voltammograms, magnetic moment measurements, and DFT calculations. In comparison, the Co complex of [NNN^NCH₃-Co(CH₃CN)₃](PF₆)₂ ([1-(CH₃CN)₃](PF₆)₂) showed a high H₂ evolution reactivity (HER), whereas a series of Co complexes with bulky π-acceptors such as [NNN^NCH₃-Co(L)(CH₃CN)](PF₆)₂ (L = phen ([2-CH₃CN](PF₆)₂), bpy ([3-CH₃CN](PF₆)₂), [NNN^NCH₃-Co(tpy)](PF₆)₂ ([4](PF₆)₂), and [NNN^CH₂-Co(phen)(CH₃CN)](PF₆)₂ ([5-CH₃CN](PF₆)₂)) suppressed the HER but rather enhanced the CO₂ reduction reaction. The metal-ligand cooperative redox steps enabled the shift of Co(I) reactivity toward CO₂ reduction. Additionally, the amine pendant attached to the NNN^NCH₃-ligand could stabilize the CO₂ reduction intermediate through the hydrogen-bonding interaction with the Co-CO₂H adduct.

Synergistic Porosity and Charge Effects in a Supramolecular Porphyrin Cage Promote Efficient Photocatalytic CO2 Reduction

We present a supramolecular approach to catalyzing photochemical CO2 reduction through second-sphere porosity and charge effects. An iron porphyrin box (PB) bearing 24 cationic groups, FePB-2(P), was made via post-synthetic modification of an alkyne-functionalized supramolecular synthon. FePB-2(P) promotes the photochemical CO2 reduction reaction (CO2 RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOFmax ) reaching 1400 min-1 . The cooperativity between porosity and charge results in a 41-fold increase in activity relative to the parent Fe tetraphenylporphyrin (FeTPP) catalyst, which is far greater than analogs that augment catalysis through porosity (FePB-3(N), 4-fold increase) or charge (Fe p-tetramethylanilinium porphyrin (Fe-p-TMA), 6-fold increase) alone. This work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces.

Multifunctional Charge and Hydrogen-Bond Effects of Second-Sphere Imidazolium Pendants Promote Capture and Electrochemical Reduction of CO2 in Water Catalyzed by Iron Porphyrins

Microenvironments tailored by multifunctional secondary coordination sphere groups can enhance catalytic performance at primary metal active sites in natural systems. Here, we capture this biological concept in synthetic systems by developing a family of iron porphyrins decorated with imidazolium (im) pendants for the electrochemical CO2 reduction reaction (CO2 RR), which promotes multiple synergistic effects to enhance CO2 RR and enables the disentangling of second-sphere contributions that stem from each type of interaction. Fe-ortho-im(H), which poises imidazolium units featuring both positive charge and hydrogen-bond capabilities proximal to the active iron center, increases CO2 binding affinity by 25-fold and CO2 RR activity by 2000-fold relative to the parent Fe tetraphenylporphyrin (Fe-TPP). Comparison with monofunctional analogs reveals that through-space charge effects have a greater impact on catalytic CO2 RR performance compared to hydrogen bonding in this context.

Substituent’s Effects of PNP Ligands in Ru(II)-Catalyzed Hydrogenation of CO2 to Formate: Theoretical Analysis Considering Steric Hindrance and Promotion of Hydrogen Bonding

This paper investigates the effects of substituents in PNP-type ruthenium complexes in the catalytic hydrogenation of CO2 to formate using the DFT method. Six groups were considered as substituents linked to the P atom of the PNP ligand: hydrogen, methyl, iso-propyl, tert-butyl, cyclopentyl, and cyclohexyl. The substituent effects were analyzed from the perspectives of steric hindrance and promotion of hydrogen bonding. With the joint functions of steric hindrance and hydrogen bonding promotion during the CO2 coordination step, hydride addition step, and HCOO− rotation step, these groups exhibited very different substituent effects. The results showed that the methyl group was the most favorable substituent when the solvent’s effects were not included, as it formed hydrogen bonding with relatively weak steric hindrance. The second favorable substituent was the iso-propyl group, while the tert-butyl group was the most unfavorable one, due to remarkable steric hindrance. When the substituent was cyclopentyl or cyclohexyl, the complex provided a wider open space for the reaction compared with the tert-butyl-substituted complex, because cyclopentyl and cyclohexyl are cyclic groups. Therefore, the principle for choosing the substituent in PNP-type complexes allowing the design of highly efficient catalysts for CO2 hydrogenation indicates that more hydrogen atoms but wider open space are ideal. In addition, the substituent’s effects can be markedly impacted by the solvent used.

Templating Bicarbonate in the Second Coordination Sphere Enhances Electrochemical CO2 Reduction Catalyzed by Iron Porphyrins

Bicarbonate-based electrolytes are ubiquitous in aqueous electrochemical CO₂ reduction, particularly in heterogenous catalysis, where they demonstrate improved catalytic performance relative to other buffers. In contrast, the presence of bicarbonate in organic electrolytes and its roles in homogeneous electrocatalysis remain underexplored. Here, we investigate the influence of bicarbonate on iron porphyrin-catalyzed electrochemical CO₂ reduction. We show that bicarbonate is a viable proton donor in organic electrolyte (pK_a = 20.8 in dimethyl sulfoxide) and that urea pendants in the second coordination sphere can be used to template bicarbonate in the vicinity of a molecular iron porphyrin catalyst. The templated binding of bicarbonate increases its acidity, resulting in a 1500-fold enhancement in catalytic rates relative to unmodified parent iron porphyrin. This work emphasizes the importance of bicarbonate speciation in wet organic electrolytes and establishes second-sphere bicarbonate templating as a design strategy to harness this adventitious acid and enhance CO₂ reduction catalysis.

Solving the structure of "single-atom" catalysts using machine learning - assisted XANES analysis

"Single-atom" catalysts (SACs) have demonstrated excellent activity and selectivity in challenging chemical transformations such as photocatalytic CO₂ reduction. For heterogeneous photocatalytic SAC systems, it is essential to obtain sufficient information of their structure at the atomic level in order to understand reaction mechanisms. In this work, a SAC was prepared by grafting a molecular cobalt catalyst on a light-absorbing carbon nitride surface. Due to the sensitivity of the X-ray absorption near edge structure (XANES) spectra to subtle variances in the Co SAC structure in reaction conditions, different machine learning (ML) methods, including principal component analysis, K-means clustering, and neural network (NN), were utilized for in situ Co XANES data analysis. As a result, we obtained quantitative structural information of the SAC nearest atomic environment, thereby extending the NN-XANES approach previously demonstrated for nanoparticles and size-selective clusters.

A guide to secondary coordination sphere editing

This tutorial review showcases recent (2015-2021) work describing ligand construction as it relates to the design of secondary coordination spheres (SCSs). Metalloenzymes, for example, utilize SCSs to stabilize reactive substrates, shuttle small molecules, and alter redox properties, promoting functional activity. In the realm of biomimetic chemistry, specific incorporation of SCS residues (e.g., Brønsted or Lewis acid/bases, crown ethers, redox groups etc.) has been shown to be equally critical to function. This contribution illustrates how fundamental advances in organic and inorganic chemistry have been used for the construction of such SCSs. These imaginative contributions have driven exciting findings in many transformations relevant to clean fuel generation, including small molecule (e.g., H⁺, N₂, CO₂, NO_x, O₂) reduction. In most cases, these reactions occur cooperatively, where both metal and ligand are requisite for substrate activation.

Outer-coordination sphere in multi-H+/multi-e-molecular electrocatalysis

Electrocatalysis is an indispensable technique for small-molecule transformations, which are essential for the sustainability of society. Electrocatalysis utilizes electricity as an energy source for chemical reactions. Hydrogen is considered the “fuel for the future,” and designing electrocatalysts for hydrogen production has thus become critical. Furthermore, fuel cells are promising energy solutions that require robust electrocatalysts for key fuel cell reactions such as the interconversion of oxygen to water. Concerns regarding the rising concentration of atmospheric carbon dioxide have prompted the search for CO₂ conversion methods. One promising approach is the electrochemical conversion of CO₂ into commodity chemicals and/or liquid fuels, but such chemistry is highly energy demanding because of the thermodynamic stability of CO₂. All of the above-mentioned electrocatalytic processes rely on the selective input of multiple protons (H⁺) and electrons (e^–) to yield the desired products. Biological enzymes evolved in nature to perform such redox catalysis and have inspired the design of catalysts at the molecular and atomic levels. While it is synthetically challenging to mimic the exact biological environment, incorporating functional outer coordination spheres into molecular catalysts has shown promise for advancing multi-H⁺ and multi-e^– electrocatalysis. From this Perspective, herein, catalysts with outer coordination sphere(s) are selected as the inspiration for developing new catalysts, particularly for the reductive conversion of H⁺, O₂, and CO₂, which are highly relevant to sustainability. The recent progress in electrocatalysis and opportunities to explore beyond the second coordination sphere are also emphasized.

Selectivity in Electrochemical CO2 Reduction

The electrocatalytic CO₂ reduction reaction (CO₂RR) to generate fixed forms of carbons that have commercial value is a lucrative avenue to ameliorate the growing concerns about the detrimental effect of CO₂ emissions as well as to generate carbon-based feed chemicals, which are generally obtained from the petrochemical industry. The area of electrochemical CO₂RR has seen substantial activity in the past decade, and several good catalysts have been reported. While the focus was initially on the rate and overpotential of electrocatalysis, it is gradually shifting toward the more chemically challenging issue of selectivity. CO₂ can be partially reduced to produce several C₁ products like CO, HCOOH, CH₃OH, etc. before its complete 8e^-/8H⁺ reduction to CH₄. In addition to that, the low-valent electron-rich metal centers deployed to activate CO₂, a Lewis acid, are prone to reduce protons, which are a substrate for CO₂RR, leading to competing hydrogen evolution reaction (HER). Similarly, the low-valent metal is prone to oxidation by atmospheric O₂ (i.e., it can catalyze the oxygen reduction reaction, ORR), necessitating strictly anaerobic conditions for CO₂RR. Not only is the requirement of O₂-free reaction conditions impractical, but it also leads to the release of partially reduced O₂ species such as O₂^-, H₂O₂, etc., which are reactive and result in oxidative degradation of the catalyst.In this Account, mechanistic investigations of CO₂RR by detecting and, often, chemically trapping and characterizing reaction intermediates are used to understand the factors that determine the selectivity in CO₂RR. The spectroscopic data obtained from different intermediates have been identified in different CO₂RR catalysts to develop an electronic structure selectivity relationship that is deemed to be important for deciding the selectivity of 2e^-/2H⁺ CO₂RR. The roles played by the spin state, hydrogen bonding, and heterogenization in determining the rate and selectivity of CO₂RR (producing only CO, only HCOOH, or only CH₄) are discussed using examples of both iron porphyrin and non-heme bioinspired artificial mimics. In addition, strategies are demonstrated where the competition between CO₂RR and HER as well as CO₂RR and ORR could be skewed overwhelmingly in favor of CO₂RR in both cases.

Switching Catalyst Selectivity via the Introduction of a Pendant Nitrophenyl Group

The conversion of abundant small molecules to value-added products serves as an attractive method to store renewable energy in chemical bonds. A family of macrocyclic cobalt aminopyridine complexes was previously reported to reduce CO₂ to CO with 98% faradaic efficiency through the formation of hydrogen-bonding networks and with the number of secondary amines affecting catalyst performance. One of these aminopyridine macrocycles, (NH)₁(NMe)₃-bridged calix[4]pyridine (L⁵), was modified with a nitrophenyl group to form L^NO2 and metalated with a cobalt(II) precursor to generate CoL^NO2, which would allow for probing the positioning and steric effects on catalysis. The addition of a nitrophenyl moiety to the ligand backbone results in a drastic shift in selectivity. Large current increases in the presence of added protons and CoL^NO2 are observed under both N₂ and CO₂. The current increases under N₂ are ∼30 times larger than the ones under CO₂, suggesting a change in the selectivity of CoL^NO2 to favor H₂ production versus CO₂ reduction. H₂ is determined to be the dominant reduction product by gas chromatography, reaching faradaic efficiencies up to 76% under N₂ with TFE and 71% under CO₂ with H₂O, in addition to small amounts of formate. X-ray photoelectron spectroscopy (XPS) reveals the presence of a cobalt-containing heterogeneous deposit on the working electrode surface, indicating the addition of the nitrophenyl group reduces the electrochemical stability of the catalyst. These observed catalytic behaviors are demonstrably different relative to the tetra-NH bridged macrocycle, which shows 98% faradaic efficiency for CO₂-to-CO conversion with TFE, highlighting the importance of pendant hydrogen bond donors and electrochemically robust functional groups for selective CO₂ conversion.

Electrocatalyst decomposition pathways: torsional strain in a second sphere proton relay shuts off CO2RR in a Re(2,2′-bipyridyl)(CO)3X type electrocatalyst

Group 7 tris(carbonyl) bipyridine complexes have been well explored as important CO2 reduction reaction (CO2RR) electrocatalysts and now represent an excellent platform for catalyst design.

Strategies for Breaking Molecular Scaling Relationships for the Electrochemical CO2 Reduction Reaction

The electrocatalytic CO2 reduction reaction (CO2RR) is a promising strategy for converting CO2 to fuels and value-added chemicals using renewable energy sources. Molecular electrocatalysts show promise for the selective conversion...

Mono-copper far more active than analogous di-copper complex for electrocatalytic hydrogen evolution

The di-copper(II) analogue, [CuII2(bis-LEt)](BF4)2 (2), of the previously reported mono-copper(II) complex [CuIILEt]BF4 (1) which resulted in long lived electrocatalytic hydrogen evolution reaction (HER), has been prepared, characterised and tested for...

Effects of Protonation State on Electrocatalytic CO2 Reduction by a Cobalt Aminopyridine Macrocyclic Complex

A critical component in the reduction of CO₂ to CO and H₂O is the delivery of 2 equiv of protons and electrons to the CO₂ molecule. The timing and sequencing of these proton and electron transfer steps are essential factors in directing the activity and selectivity for catalytic CO₂ reduction. In previous studies, we have reported a series of macrocyclic aminopyridine cobalt complexes capable of reducing CO₂ to CO with high faradaic efficiencies. Kinetic investigations reveal a relationship between the observed rate constant (k_obs) and the number of pendant amine hydrogen bond donors minus one, suggesting the presence of a deprotonated active catalytic state. Herein, we investigate the feasibility of these proposed deprotonated complexes toward CO₂ reduction. Two deprotonated derivatives, Co(L^4-) and Co(L^2-), of the tetraamino macrocycle Co(L) were independently synthesized and structurally characterized revealing extensive delocalization of the negative charge upon deprotonation. ¹H nuclear magnetic resonance spectroscopy and ultraviolet-visible titration studies confirm that under catalytic conditions, the active form of the catalyst gradually becomes deprotonated, supporting thus the n_donor - 1 relationship with k_obs. Electrochemical studies of Co(L^4-) reveal that this deprotonated analogue is competent for electrocatalysis upon addition of an exogenous weak acid source, such as 2,2,2-trifluoroethanol, resulting in faradaic efficiencies for CO₂-to-CO conversion identical to those observed with the fully protonated derivative (>98%).

Computational Study for CO2-to-CO Conversion over Proton Reduction Using [Re[bpyMe(Im-R)](CO)3Cl]+ (R = Me, Me2, and Me4) Electrocatalysts and Comparison with Manganese Analogues

The Nippe group has previously reported a series of imidazolium-functionalized rhenium bipyridyl tricarbonyl electrocatalysts, [Re[bpyMe(Im-R)]-(CO)₃Cl]⁺ (R = Me and Me₂), for CO₂-to-CO conversion using H₂O as the proton source [Sung, S.; Kumar, D., et al. Electrocatalytic CO₂ Reduction by Imidazolium-Functionalized Molecular Catalysts. J. Am. Chem. Soc. 2017, 139, 40, 13993-13996. 10.1021/jacs.7b07709]. These compounds feature charged imidazolium ligands in the secondary coordination sphere and exhibit higher catalytic activities as compared to the Lehn catalyst [Re(bpy)(CO)₃Cl] (where bpy = 2,2'-bipyridine). However, the reaction mechanism for the CO₂ reduction reaction (CO₂RR) over the competing hydrogen evolution reaction (HER) is unclear. Here, we employ density functional theory (DFT) and restricted active space self-consistent field (RASSCF) methods to study the selectivity for CO₂ fixation using [Re[bpyMe(ImMe)](CO)₃Cl]⁺ (1 ⁺) in water and compare its reactivity to [Re[bpyMe(ImMe₂)](CO)₃Cl]⁺ (2 ⁺) and [Re[bpyMe(ImMe₄)](CO)₃Cl]⁺ (3 ⁺). Our results reveal that the turnover frequency (TOF) for CO₂RR using 1 ⁺ is 4 orders of magnitude higher than for proton reduction, consistent with controlled potential electrolysis (CPE) experiments in which CO was the only detectable reduction product. The imidazolium moiety in the secondary coordination sphere stabilizes the metallocarboxylate species and assists the C-O cleavage through intermolecular hydrogen-bonding stabilizations. Furthermore, our calculations imply that the strongest hydrogen-bonding interactions at the C2 position in 1 ⁺ contribute to the faster reaction rate observed experimentally with respect to 2 ⁺. More significantly, the use of the energy span model demonstrates that the turnover frequency-determining transition state (TDTS) corresponds to the formation of the Re-CO₂ adduct, contrasting with manganese analogues in which the C-O bond cleavage step is the TDTS. We attribute this distinction based on the electronic structures of doubly reduced active catalysts. Indeed, RASSCF calculations indicate that rhenium compounds are best described as a rhenium(I) coupled with a doubly reduced bipyridine ligand, [Re^I[bpyMe(ImMe)^2-](CO)₃]⁰. In contrast, manganese analogues feature a metal center in a formal zero oxidation state antiferromagnetically coupled with an unpaired electron on the bpy, [Mn⁰[bpyMe(ImMe)^•-](CO)₃]⁰.

Construction of Two Stable Co(II)-Based Hydrogen-Bonded Organic Frameworks as a Luminescent Probe for Recognition of Fe3+ and Cr2O72- in H2O

A pair of cobalt(II)-based hydrogen-bonded organic frameworks (HOFs), [Co(pca)2(bmimb)]n (1) and [Co2(pca)4(bimb)2] (2), where Hpca = p-chlorobenzoic acid, bmimb = 1,3-bis((2-methylimidazol-1-yl)methyl)benzene, and bimb = 1,4-bis(imidazol-1-ylmethyl)benzene were hydrothermally synthesized and characterized through infrared spectroscopy (IR), elemental and thermal analysis (EA), power X-ray diffraction (PXRD), and single-crystal X-ray diffraction (SCXRD) analyses. X-ray diffraction structural analysis revealed that 1 has a one-dimensional (1D) infinite chain network through the deprotonated pca- monodentate chelation and with a μ2-bmimb bridge Co(II) atom, and 2 is a binuclear Co(II) complex construction with a pair of symmetry-related pca- and bimb ligands. For both 1 and 2, each cobalt atom has four coordinated twisted tetrahedral configurations with a N2O2 donor set. Then, 1 and 2 are further extended into three-dimensional (3D) or two-dimensional (2D) hydrogen-bonded organic frameworks through C-H···Cl interactions. Topologically, HOFs 1 and 2 can be simplified as a 4-connected qtz topology with a Schläfli symbol {64·82} and a 4-connected sql topology with a Schläfli symbol {44·62}, respectively. The fluorescent sensing application of 1 was investigated; 1 exhibits high sensitivity recognition for Fe3+ (Ksv: 10970 M-1 and detection limit: 19 μM) and Cr2O72- (Ksv: 12960 M-1 and detection limit: 20 μM). This work provides a feasible detection platform of HOFs for highly sensitive discrimination of Fe3+ and Cr2O72- in aqueous media.

Secondary Coordination Effect on Monobipyridyl Ru(II) Catalysts in Photochemical CO2 Reduction: Effective Proton Shuttle of Pendant Brønsted Acid/Base Sites (OH and N(CH3)2) and Its Mechanistic Investigation

While the incorporation of pendant Brønsted acid/base sites in the secondary coordination sphere is a promising and effective strategy to increase the catalytic performance and product selectivity in organometallic catalysis for CO₂ reduction, the control of product selectivity still faces a great challenge. Herein, we report two new trans(Cl)-[Ru(6-X-bpy)(CO)₂Cl₂] complexes functionalized with a saturated ethylene-linked functional group (bpy = 2,2'-bipyridine; X = -(CH₂)₂-OH or -(CH₂)₂-N(CH₃)₂) at the ortho(6)-position of bpy ligand, which are named Ru-bpy^OH and Ru-bpy^diMeN, respectively. In the series of photolysis experiments, compared to nontethered case, the asymmetric attachment of tethering ligand to the bpy ligand led to less efficient but more selective formate production with inactivation of CO₂-to-CO conversion route during photoreaction. From a series of in situ FTIR analyses, it was found that the Ru-formate intermediates are stabilized by a highly probable hydrogen bonding between pendent proton donors (-diMeN⁺H or -OH) and the oxygen atom of metal-bound formate (Ru^I-OCHO···H-E-(CH₂)₂-, E = O or diMeN⁺). Under such conformation, the liberation of formate from the stabilized Ru^I-formate becomes less efficient compared to the nontethered case, consequently lowering the CO₂-to-formate conversion activities during photoreaction. At the same time, such stabilization of Ru-formate species prevents the dehydration reaction route (η¹-OCHO → η¹-COOH on Ru metal) which leads toward the generation of Ru-CO species (key intermediate for CO production), eventually leading to the reduction of CO₂-to-CO conversion activity.

Activating the Fe(I) State of Iron Porphyrinoid with Second-Sphere Proton Transfer Residues for Selective Reduction of CO2 to HCOOH via Fe(III/II)-COOH Intermediate(s)

The ability to tune the selectivity of CO₂ reduction by first-row transition metal-based complexes via the inclusion of second-sphere effects heralds exciting and sought-after possibilities. On the basis of the mechanistic understanding of CO₂ reduction by iron porphyrins developed by trapping and characterizing the intermediates involved ( J. Am. Chem. Soc. 2015, 137, 11214), a porphyrinoid ligand is envisaged to switch the selectivity of the iron porphyrins by reducing CO₂ from CO to HCOOH as well as lower the overpotential to the process. The results show that the iron porphyrinoid designed can catalyze the reduction of CO₂ to HCOOH using water as the proton source with 97% yield with no detectable H₂ or CO. The iron porphyrinoid can activate CO₂ in its Fe(I) state resulting in very low overpotential for CO₂ reduction in contrast to all reported iron porphyrins, which can reduce CO₂ in their Fe(0) state. Intermediates involved in CO₂ reduction, Fe(III)-COOH and a Fe(II)-COOH, are identified with in situ FTIR-SEC and subsequently chemically generated and characterized using FTIR, resonance Raman, and Mössbauer spectroscopy. The mechanism of the reaction helps elucidate a key role played by a closely placed proton transfer residue in aiding CO₂ binding to Fe(I), stabilizing the intermediates, and determining the fate of a rate-determining Fe(II)-COOH intermediate.

Electrocatalytic syngas generation with a redox non-innocent cobalt 2-phosphinobenzenethiolate complex

A cobalt complex supported by the 2-(diisopropylphosphaneyl)benzenethiol ligand was synthesized and its electronic structure and reactivity were explored. X-ray diffraction studies indicate a square planar geometry around the cobalt center with a trans arrangement of the phosphine ligands. Density functional theory calculations and electronic spectroscopy measurements suggest a mixed metal-ligand orbital character, in analogy to previously studied dithiolene and diselenolene systems. Electrochemical studies in the presence of 1 atm of CO₂ and Brønsted acid additives indicate that the cobalt complex generates syngas, a mixture of H₂ and CO, with faradaic efficiencies up to >99%. The ratios of H₂ : CO generated vary based on the additive. A H₂ : CO ratio of ∼3 : 1 is generated when H₂O is used as the Brønsted acid additive. Chemical reduction of the complex indicates a distortion towards a tetrahedral geometry, which is rationalized with DFT predictions as attributable to the populations of orbitals with σ*(Co-S) character. A mechanistic scheme is proposed whereby competitive binding between a proton and CO₂ dictates selectivity. This study provides insight into the development of a catalytic system incorporating non-innocent ligands with pendant base moieties for electrochemical syngas production.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Coordination sphere hydrogen bonding as a structural element in metal-organic Frameworks

In the design of new metal-organic frameworks, the constant challenges of framework stability and structural predictability continue to influence ligand choice in favour of well-studied dicarboxylates and similar ligands. However, a small subset of known MOF ligands contains suitable functionality for coordination sphere hydrogen bonding which can provide new opportunities in ligand design. Such interactions may serve to support and rigidity the coordination geometry of mononuclear coordination spheres, as well as providing extra thermodynamic and kinetic stabilisation to meet the challenge of hydrolytic stability in these materials. In this perspective, a collection of pyrazole, amine, amide and carboxylic acid containing species are examined through the lens of (primarily) inner-sphere hydrogen bonding. The influence of these interactions is then related to the overall structure, stability and function of these materials, to provide starting points for harnessing these interactions in future materials design.