Amidoxime-Functionalized Macroporous Carbon Self-Refreshed Electrode Materials for Rapid and High-Capacity Removal of Heavy Metal from Water

Plate centrifugation enhances the efficiency of polyethylenimine-based transfection and lentiviral infection

PURPOSE

To propose an efficient, reproducible, and consistent transgenic technology based on plate centrifugation, which is particularly useful for polyethylenimine (PEI) transfection and lentiviral infection.

METHODS

We optimized multiple factors that could contribute to transfection efficiency, such as the dosage of the PEI or DNA, the working solution buffer used for diluting the PEI or DNA, the incubation time for the PEI/DNA complexes, and the transfection time.

RESULTS

Plate centrifugation led to a 5.46-fold increase in the transfection efficiency of PEI-based transfection while maintaining the cell survival rate. Moreover, the average copy number of viral genes in each genome increased 4.96-fold with plate centrifugation. Plate centrifugation alters the spatial arrangement of the PEI/DNA complexes or lentiviruses, increasing the chances of these complexes or viruses coming into contact with target cells, ultimately resulting in improved transfection or infection efficiency.

CONCLUSIONS

We present a protocol based on plate centrifugation for transfection or lentiviral infection that is suitable for genetic modification of primary cells or stem cells.

Facile fabrication of chitosan/bone/bamboo biochar beads for simultaneous removal of co-existing Cr(VI) and bisphenol a from water

Heavy metal Cr(VI) and organic BPA have posed harmful risks to human health, aquatic organisms and the ecosystem. In this work, Chitosan/bone/bamboo biochar beads (CS-AMCM) were synthesized by co-pyrolysis and in situ precipitation method. These microbeads featured a particle size of approximately 1 ± 0.2 mm and were rich in oxygen/nitrogen functional groups. CS-AMCM was characterized using XRD, Zeta potential, FTIR, etc. Experiments showed that adsorption processes of CS-AMCM on Cr(VI) and BPA fitted well to Langmuir model, with theoretical maximum capacities of 343.61 mg/g and 140.30 mg/g, respectively. Pore filling, electrostatic attraction, redox, complexation and ion exchange were the main mechanisms for Cr(VI), whereas for BPA, the intermolecular force (hydrogen bond) and pore filling were involved. CS-AMCM with adsorbed Cr(VI) demonstrated effective activation in producing ·OH and ·O2 from H2O2, which degraded BPA and Cr(VI) with the removal rates of 99.2% and 98.2%, respectively. CS-AMCM offers the advantages of low-cost, large adsorption capacity, high catalytic degradation efficiency, and favorable recycling in treating Cr(VI) and BPA mixed wastewater, which shows great potential in treating heavy metal and organic matter mixed pollution wastewater.

Trapping of heavy metal ions from electroplating wastewater with phosphorylated double-shelled hollow spheres

The mesoporous multi-shelled hollow structures are promising for trapping of non-degradable heavy metal ions in wastewater but difficult to synthesize. We successfully demonstrated a simple strategy for the construction of mesopore windows on double-shelled α-Fe2O3 hollow spheres. A step-by-step proof of concept synthesis mechanism has been revealed by using mainly electron microscopy and thermogravimetric analysis. We proved that mesopore windows are indispensable to realize the complete surface coverage of phosphonate ligands on α-Fe2O3 double-shelled hollow spheres. The phosphonic groups inherently coordinated with Ni(II) and Cu(II) ions and formed complexes of high stability. Importantly, owing to the structural merits, the phosphorylated double-shelled hollow spheres selectively removes Ni(II) and Cu(II) at wider sample pH range with a high capacity of 380 mg g-1 and 410 mg g-1, respectively. In addition, no significant decrease in the removal efficiency was observed under high salt matrix. For electroplating industry wastewater, the novel structure performs simultaneous Ni(II) and Cu(II) removal, thus producing effluent of stable quality that meets local discharge regulations.

Revisiting of Properties and Modified Polyethylenimine-Based Cancer Gene Delivery Systems

A new era of medical technology in cancer treatment is a directly specific modification of gene expression in tumor cells by nucleic acid delivery. Currently, the main challenge to achieving this goal is to find a non-toxic, safe, and effective strategy for gene transfer to cancer cells. Synthetic composites based on cationic polymers have historically been favored in bioengineering due to their ability to mimic bimolecular structures. Among them, polyethylenimines (PEIs) with superior properties such as a wide range of molecular weight and a flexible structure may propel the development of functional combinations in the biomedical and biomaterial fields. Here, in this review, we will focus on the recent progressions in the formulation optimization of PEI-based polyplex in gene delivery to treat cancer. Also, the effect of PEI's intrinsic characteristics such as structure, molecular weight, and positive charges which influence the gene delivery efficiency will be discussed.

Biochar and organic fertilizer drive the bacterial community to improve the productivity and quality of Sophora tonkinensis in cadmium-contaminated soil

Excessive Cd accumulation in soil reduces the production of numerous plants, such as Sophora tonkinensis Gagnep., which is an important and widely cultivated medicinal plant whose roots and rhizomes are used in traditional Chinese medicine. Applying a mixture of biochar and organic fertilizers improved the overall health of the Cd-contaminated soil and increased the yield and quality of Sophora. However, the underlying mechanism between this mixed fertilization and the improvement of the yield and quality of Sophora remains uncovered. This study investigated the effect of biochar and organic fertilizer application (BO, biochar to organic fertilizer ratio of 1:2) on the growth of Sophora cultivated in Cd-contaminated soil. BO significantly reduced the total Cd content (TCd) in the Sophora rhizosphere soil and increased the soil water content, overall soil nutrient levels, and enzyme activities in the soil. Additionally, the α diversity of the soil bacterial community had been significantly improved after BO treatment. Soil pH, total Cd content, total carbon content, and dissolved organic carbon were the main reasons for the fluctuation of the bacterial dominant species. Further investigation demonstrated that the abundance of variable microorganisms, including Acidobacteria, Proteobacteria, Bacteroidetes, Firmicutes, Chloroflexi, Gemmatimonadetes, Patescibacteria, Armatimonadetes, Subgroups_ 6, Bacillus and Bacillus_ Acidiceler, was also significantly changed in Cd-contaminated soil. All these alterations could contribute to the reduction of the Cd content and, thus, the increase of the biomass and the content of the main secondary metabolites (matrine and oxymatrine) in Sophora. Our research demonstrated that the co-application of biochar and organic fertilizer has the potential to enhance soil health and increase the productivity and quality of plants by regulating the microorganisms in Cd-contaminated soil.

Electrochemical reduction of wastewater by non-noble metal cathodes: From terminal purification to upcycling recovery

A shift beyond conventional environmental remediation to a sustainable pollutant upgrading conversion is extremely desirable due to the rising demand for resources and widespread chemical contamination. Electrochemical reduction processes (ERPs) have drawn considerable attention in recent years in the fields of oxyanion reduction, metal recovery, detoxification and high-value conversion of halogenated organics and benzenes. ERPs also have the potential to address the inherent limitations of conventional chemical reduction technologies in terms of hydrogen and noble metal requirements. Fundamentally, mechanisms of ERPs can be categorized into three main pathways: direct electron transfer, atomic hydrogen mediation, and electrode redox pairs. Furthermore, this review consolidates state-of-the-art non-noble metal cathodes and their performance comparable to noble metals (e.g., Pd, Pt) in electrochemical reduction of inorganic/organic pollutants. To overview the research trends of ERPs, we innovatively sort out the relationship between the electrochemical reduction rate, the charge of the pollutant, and the number of electron transfers based on the statistical analysis. And we propose potential countermeasures of pulsed electrocatalysis and flow mode enhancement for the bottlenecks in electron injection and mass transfer for electronegative pollutant reduction. We conclude by discussing the gaps in the scientific and engineering level of ERPs, and envisage that ERPs can be a low-carbon pathway for industrial wastewater detoxification and valorization.

Free nitrous acid-assisted asymmetrical alternating current electrochemistry (FNA-AACE) for multi-heavy metals decontamination in waste activated sludge

Heavy metal contamination of waste activated sludge (WAS) is a key factor limiting the land application of sludge for nutrients recovery. This study proposes a novel free nitrous acid (FNA)-assisted asymmetrical alternating current electrochemistry (FNA-AACE) process to achieve high-efficiency decontamination of multi-heavy metals (Cd, Pb, and Fe) in WAS. The optimal operating conditions, the heavy metal removal performance of FNA-AACE, and the related mechanisms for maintaining the high performance were systematically investigated. During the FNA-AACE process, FNA treatment was optimal with an exposure time of 13 h at a pH of 2.9 and an FNA concentration of 0.6 mg/g TSS. Then the sludge was washed with EDTA in a recirculating leaching system under asymmetrical alternating current electrochemistry (AACE). The 6-h working and the following electrode cleaning were defined as a working circle of AACE. After three cycles of working-cleaning periods in AACE treatment, the cumulative removal efficiency of the toxic metals Cd and Pb reached over 97% and 93%, respectively, whilst that of Fe was greater than 65%. This surpasses most previously reported efficiencies and possesses a shorter treatment duration and sustainable EDTA circulation. The mechanism analysis suggested that FNA pretreatment provoked the migration of heavy metals for leaching enhancement, as well as reduced the demand for EDTA eluent concentration and increased conductivity, which can improve the AACE efficiency. Meanwhile, the AACE process absorbed the anionic chelates of heavy metals and reduced them to zero-valent particles on the electrode, regenerating the EDTA eluent and maintaining its high extraction efficiency for heavy metals. In addition, FNA-AACE could provide different electric field operation modes, allowing it to have flexibility for the real application processes. This proposed process is expected to be coupled with anaerobic digestion in wastewater treatment plants (WWTPs) for high efficiency of heavy metal decontamination, sludge reduction, and resource/energy recovery.

Asymmetric Alternative Current Electrochemical Method Coupled with Amidoxime-Functionalized Carbon Felt Electrode for Fast and Efficient Removal of Hexavalent Chromium from Wastewater

A large amount of Cr (VI)-polluted wastewater produced in electroplating, dyeing and tanning industries seriously threatens water ecological security and human health. Due to the lack of high-performance electrodes and the coulomb repulsion between hexavalent chromium anion and cathode, the traditional DC-mediated electrochemical remediation technology possesses low Cr (VI) removal efficiency. Herein, by modifying commercial carbon felt (O-CF) with amidoxime groups, amidoxime-functionalized carbon felt electrodes (Ami-CF) with high adsorption affinity for Cr (VI) were prepared. Based on Ami-CF, an electrochemical flow-through system powered by asymmetric AC was constructed. The mechanism and influencing factors of efficient removal of Cr (VI) contaminated wastewater by an asymmetric AC electrochemical method coupling Ami-CF were studied. Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) characterization results showed that Ami-CF was successfully and uniformly loaded with amidoxime functional groups, and the adsorption capacity of Cr (VI) was more than 100 times higher than that of O-CF. In particular, the Coulomb repulsion effect and the side reaction of electrolytic water splitting were inhibited by the high-frequency anode and cathode switching (asymmetric AC), the mass transfer rate of Cr (VI) from electrode solution was increased, the reduction efficiency of Cr (VI) to Cr (III) was significantly promoted and a highly efficient removal of Cr (VI) was achieved. Under optimal operating conditions (positive bias 1 V, negative bias 2.5 V, duty ratio 20%, frequency 400 Hz, solution pH = 2), the asymmetric AC electrochemistry based on Ami-CF can achieve fast (30 s) and efficient removal (>99.11%) for 0.5-100 mg·L^-1 Cr (VI) with a high flux of 300 L h^-1 m^-2. At the same time, the durability test verified the sustainability of the AC electrochemical method. For Cr (VI)-polluted wastewater with an initial concentration of 50 mg·L^-1, the effluent concentration could still reach drinking water grade (<0.05 mg·L^-1) after 10 cycling experiments. This study provides an innovative approach for the rapid, green and efficient removal of Cr (VI) containing wastewater at low and medium concentrations.

Effective adsorption of heavy metal ions in water by sulfhydryl modified nano titanium dioxide

Background: The monitoring and removal of heavy metal ions in wastewater will effectively improve the quality of water and promote the green and sustainable development of ecological environment. Using more efficient adsorption materials and more accurate detection means to treat heavy metal ions in water has always been a research focus and target of researchers. Method: A novel titania nanomaterial was modified with sulfhydryl group (nano TiO₂-SH) for detection and adsorption of heavy metal ions in water, and accurately characterize the adsorption process using Surface-Enhanced Raman Spectroscopy (SERS) and other effective testing methods. Results: The maximum adsorption efficiency of nano TiO₂-SH for the Hg²⁺, Cd²⁺, Pb²⁺ three heavy metal ions reached 98.3%, 98.4% and 98.4% respectively. And more importantly, after five cycles of adsorption and desorption, the adsorption efficiency of nano TiO₂-SH for these three metal ions is still above 96%. Conclusion: These results proved the nano TiO₂-SH adsorbent has great potential in practical water pollution purification.

Sustainable decontamination of heavy metal in wastewater and soil with novel rectangular wave asymmetrical alternative current electrochemistry

A new concept of removal and recovery of heavy metals and simultaneous regeneration and reuse of ethylenediamine-tetraacetic acid (EDTA) in soil washing effluent containing metal-EDTA complexes is proposed, which is used to remediate heavy metal contaminated soil. To achieve this goal, soil washing approach coupled with rectangular wave asymmetrical alternative current electrochemistry (RW-ACE) equipped with amidoxime-functionalized electrodes (Ami-CF) is employed. With high hydrophilicity and strong binding affinity, Ami-CF could specifically compete for heavy metals over EDTA under electric field. RW-ACE system is found successfully to achieve the non-destructive decomplexation of heavy metal-EDTA, and then regenerate EDTA for highly recycling, which saves as high as 98.9 % EDTA consumption compared with conventional washing method. Moreover, more than 90% of heavy metals are recovered and deposited on the electrode with a majority of them existed as zero-valence state as evidenced by XPS. The RW-ACE method is universal for various heavy metals such as Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ in an authentic contaminated soil, and the loss of soil nutrient is very limited. Along with long-term assessment and operation cost estimation, the RW-ACE method is a sustainable remediation approach for the heavy metal polluted wastewater and soils, and easily scaled up for field practice.

High-performance pseudocapacitive removal of cadmium via synergistic valence conversion in perovskite-type FeMnO3

Cadmium pollution is a serious threat for the global drink water and natural environment. Herein, a poly-pyrrole coated dual-metal perovskite-type oxide FeMnO₃ (PFMO@PPy) was developed firstly as pseudocapacitive cathode for the reversible capture and release of cadmium ions by asymmetry pseudocapacitive deionization (APCDI) technology, extending the library of CDI electrodes. Our work highlighted several points: (i) PFMO@PPy achieved a maximum Cd-removal capacity of 144.6 mg g^-1, and maintained the retention rate of 93.4% after 15-cycle CDI process for up to 150 h, far beyond other previous work. (ii) PFMO@PPy showed the superior removal ratio (~90%) under different real water environments such as tap water, lake water and the groundwater. (iii) The superior Cd(II) electrosorption and desorption behavior is ascribed to the reversible synergistic valence conversion (Fe³⁺/Fe⁰ and Mn³⁺/Mn²⁺), which is confirmed by ex-situ XPS measurement and electrochemical tests. (iv) DFT calculations confirmed the synergistic effect from Mn and Fe elements in perovskite-type bimetallic oxide FeMnO₃. This study paves a new way for promising future applications of perovskite-type oxides containing dual Faradic redox-activity for wastewater treatment and environmental remediation.

Encapsulating Amidoximated Nanofibrous Aerogels within Wood Cell Tracheids for Efficient Cascading Adsorption of Uranium Ions

Continuous filtering adsorption has drawn growing interest in the exploration of uranium resources in seawater and reduction in the environmental risks of uraniferous wastewater from nuclear industries. For most filtering adsorbents, repeated filtration, high membrane thickness, and high pressure are normally essential to achieve both a high rejection ratio and high filtration flux. Herein cellulose fibrils were preferentially exfoliated from the lignin-poor layer of secondary cell walls of balsa wood during an in situ amidoximation process. By maintaining honeycomb-like cellular microstructures and cellulose aerogel stuffing in their cell tracheids, the resultant nanowoods showed superior mechanical properties (e.g., compressive strength ∼1.3 MPa in transverse direction) with large surface areas (∼80 m² g^-1). When their cell tracheids were aligned perpendicular to the flow and the edges sealed with a thermoset polymer, they could serve as efficient and high-pressure filtration membranes to capture aquatic uranium ions. In analogy to a typical cascading filtration system, the filtrate passed successively the layered-organized cell tracheids through abundant micropores on their cell walls, enabling a high rejection ratio of >99% and flux of ∼920 L m^-2 h^-1 under pressure up to 6 bar (membrane thickness of 2 mm). Thus, this study not only provides an in situ approach to producing robust woods with functional nanocellulose encapsulated into their cell tracheids but also offers a sustainable route for high-efficiency extraction of aqueous uranium.

Demand-oriented construction of Mo3S13-LDH: A versatile scavenger for highly selective and efficient removal of toxic Ag(I), Hg(II), As(III), and Cr(VI) from water

Inspired by the classic ion-exchange reaction, a single phase material of Mg_0.66Al_0.34(OH)₂(Mo₃S₁₃)_0.03(NO₃)_0.14(CO₃)_0.07·H₂O (Mo₃S₁₃-LDH) was masterly constructed by intercalating Mo₃S₁₃^2- into the MgAl-LDH gallery. Prepared Mo₃S₁₃-LDH displays excellent binding affinity and high selectivity for Ag(I) and Hg(II) in a mixed solution, in which an apparent selectivity order of Hg(II) > Ag(I) ≫ Pb(II), Cu(II), Ni(II), Co(II), Cd(II), and Mn(II) is observed. Enormous capture capacities (q_m^Ag = 446.4 mg/g, q_m^Hg = 354.6 mg/g) and fast equilibration time (within 60 min) place Mo₃S₁₃-LDH in the upper ranks of materials for such removal. For oxoanions, As(III) (HAsO₃^2-) and Cr(VI) (CrO₄^2-) can be specifically trapped by Mo₃S₁₃-LDH with comparable loading ability (q_m^As = 61.8 mg/g, q_m^Cr = 90.6 mg/g) in the coexistence of multiple interfering anions. Notably, high Hg(II) and Cr(VI) concentrations are finally reduced below the safe limit of drinking water. The excellent capture capacity of Mo₃S₁₃-LDH benefits from the rational design by following two aspects: (i) the multiple sulfur ligands in Mo₃S₁₃^2- groups give place to various capture modes and different affinity orders for target ions, and (ii) large-sized Mo₃S₁₃^2- groups widen the interlayer spacing of LDH, thereby accelerating the mass transfer process. Furthermore, the satisfactory structural stability of Mo₃S₁₃-LDH is also reflected through the unchanged hexagonal prismatic shape after adsorption. All of these highlight the great potential of Mo₃S₁₃-LDH for the application in water remediation.

Covalent organic frameworks functionalized electrodes for simultaneous removal of UO22+ and ReO4- with fast kinetics and high capacities by electro-adsorption

The recovery of radioactive ions from high salinity low-level radioactive wastewater (LLRW) is important for the sustainable utilization of nuclear energy. Previous work primarily focuses on developing adsorbents that remove individual types of ions via physicochemical adsorption. Here, we report a new strategy for the simultaneous recovery of uranium (UO₂²⁺) and rhenium (ReO₄^-) as a non-radioactive surrogate of technetium from LLRW via electro-adsorption. Carboxyl functionalized covalent organic frameworks (COF-1) and cationic covalent organic frameworks (COF-2) were prepared as cathode and anode materials, respectively. The adsorption capacities were 411 mg U/g for COF-1 and 984 mg Re/g for COF-2 under 1.2 direct-current (DC) volts, 2.5 and 2.1 times higher than the capacities of the same adsorbents obtained by physicochemical adsorption. We also found that the electro-adsorption of uranium and rhenium follows pseudo-second-order kinetics with the adsorption rates of 0.45 and 1.05 g/mg/h at pH 7.0 and 298.15 K, again two times faster than those measured in physicochemical adsorption. Therefore, electro-adsorption improves both adsorption capacity and kinetics by maximizing the utility of available active sites in adsorbents and facilitating ion migration towards the adsorbents. The adsorption efficiencies for uranium and rhenium reached 65.9% and 89.2%, respectively, after electro-adsorption for 2 h. The high efficiencies can be maintained after five adsorption-desorption cycles. Furthermore, the electrodes showed high selectivity for uranium(VI) and rhenium(VII) and excellent salt resistance even in 1 mol/L NaCl solution. XPS studies revealed that covalent bonds were formed between uranium(VI) and carboxyl groups on COF-1, and rhenium(VII) was bound to cationic COF-2 through electrostatic interaction. Our asymmetric electrodes design can be extended to simultaneously and efficiently remove other types of radioactive or heavy metal ions from wastewater.

Raptopoulou C, Psycharis V, Konidaris KF, Chasapis CT, Perlepes SP. Confirming the Molecular Basis of the Solvent Extraction of Cadmium(II) Using 2-Pyridyl Oximes through a Synthetic Inorganic Chemistry Approach and a Proposal for More Efficient Extractants

The present work describes the reactions of CdI2 with 2-pyridyl aldoxime (2paoH), 3-pyridyl aldoxime (3paoH), 4-pyridyl aldoxime (4paoH), 2-6-diacetylpyridine dioxime (dapdoH2) and 2,6-pyridyl diamidoxime (LH4). The primary goal was to contribute to understanding the molecular basis of the very good liquid extraction ability of 2-pyridyl ketoximes with long aliphatic chains towards toxic Cd(II) and the inability of their 4-pyridyl isomers for this extraction. Our systematic investigation provided access to coordination complexes [CdI2(2paoH)2] (1), {[CdI2(3paoH)2]}n (2), {[CdI2(4paoH)2]}n (3) and [CdI2(dapdoH2)] (4). The reaction of CdI2 and LH4 in EtOH resulted in a Cd(II)-involving reaction of the bis(amidoxime) and isolation of [CdI2(L'H2)] (5), where L'H2 is the new ligand 2,6-bis(ethoxy)pyridine diimine. A mechanism of this transformation has been proposed. The structures of 1, 2, 3, 4·2EtOH and 5 were determined by single-crystal X-ray crystallography. The complexes have been characterized by FT-IR and FT-Raman spectra in the solid state and the data are discussed in terms of structural features. The stability of the complexes in DMSO was investigated by 1H NMR spectroscopy. Our studies confirm that the excellent extraction ability of 2-pyridyl ketoximes is due to the chelating nature of the extractants leading to thermodynamically stable Cd(II) complexes. The monodentate coordination of 4-pyridyl ketoximes (as confirmed in our model complexes with 4paoH and 3paoH) seems to be responsible for their poor performance as extractants.

Physiological of biochar and α-Fe2O3 nanoparticles as amendments of Cd accumulation and toxicity toward muskmelon grown in pots

BACKGROUND

Due to the severe cadmium (Cd) pollution of farmland soil, effective measures need to be taken to reduce the Cd content in agricultural products. In this study, we added α-Fe2O3 nanoparticles (NPs) and biochar into Cd-contaminated soil to investigate physiological responses of muskmelon in the whole life cycle.

RESULTS

The results showed that Cd caused adverse impacts on muskmelon (Cucumis melo) plants. For instance, the chlorophyll of muskmelon leaves in the Cd alone treatment was reduced by 8.07-32.34% in the four periods, relative to the control. The treatments with single amendment, α-Fe2O3 NPs or 1% biochar or 5% biochar, significantly reduced the soil available Cd content, but the co-exposure treatments (α-Fe2O3 NPs and biochar) had no impact on the soil available Cd content. All treatments could reduce the Cd content by 47.64-74.60% and increase the Fe content by 15.15-95.27% in fruits as compared to the Cd alone treatment. The KEGG enrichment results of different genes in different treatments indicated that single treatments could regulate genes related to anthocyanin biosynthesis, glutathione metabolism and MAPK signal transduction pathways to reduce the Cd toxicity.

CONCLUSIONS

Overall the combination of biochar and α-Fe2O3 NPs can alleviate Cd toxicity in muskmelon. The present study could provide new insights into Cd remediation in soil using α-Fe2O3 NPs and biochar as amendments.

Selective and highly efficient removal of uranium from radioactive effluents by activated carbon functionalized with 2-aminobenzoic acid as a new sorbent

The purpose of this study was modification of activated carbon (AC) to prepare a new selective sorbent for removal of uranium ion. The modification was performed by introducing carboxyl groups onto AC using ammonium persulfate (APS) in sulfuric acid solution followed by functionalization with 2-aminobenzoic acid (ABA) as a selective ligand for U (VI) ion (UO₂²⁺) adsorption. The characterization of the synthetized sorbent (AC-ABA) was carried out through several methods including potentiometry, scanning electron microscopy, energy dispersive spectroscopy, x-ray diffraction and FT-IR to confirm successful functionalization of the sorbent surface with oxygen and amine groups. The sorption of U (VI) on the unmodified AC and AC-ABA was investigated as a function of contact time, sorbent content, initial uranium concentration, solution pH, and temperature using batch sorption technique. In addition, the effect of various parameters on the U (VI) sorption capacity was optimized by the response surface methodology as a potent experimental design method. The results indicated that sorption of U (VI) under the optimal conditions was significantly improved onto AC-ABA compared to AC. Kinetic studies displayed that the sorption process reached equilibrium after 100 min and followed the pseudo-second-order rate equation. The isothermal data fitted better with the Langmuir model than the Freundlich model. The maximum sorption capacity of AC-ABA for U(VI) was obtained to be 194.2 mg g^-1 by the Langmuir model under optimum conditions, which demonstrates the sorption capacity has been improved by the modification process. The thermodynamic parameters (ΔH, ΔS and ΔG) indicated that sorption of uranium onto AC-ABA was an endothermic and spontaneous process. The sorption studies on radioactive effluents of the nuclear fuel plant represented high selectivity of AC-ABA for removal of uranium in the presence of other metal ions, and the selectivity coefficients significantly improved after modification of the sorbent. Application of AC-ABA for treatment of industrial effluents containing heavy and radioactive metal ions show high potential and capability of the proposed method.

Adsorption of Metallic Ions on Amidoxime-Chitosan/Cellulose Hydrogels

Adsorption using natural compounds is an attractive separation technique for recovering heavy metals from aqueous media. Although chitosan, which is a natural polysaccharide, is an environmentally benign adsorbent, it dissolves in an acidic aqueous medium. In this study, we prepared adsorbents consisting of chitosan modified with amidoxime groups for improving metal adsorptivity, and cellulose for improving gel stability using an ionic liquid, and examined their adsorption characteristics for metal ions. The prepared amidoxime-chitosan/cellulose hydrogels had a mechanical strength without cross-linking. All the investigated metals were adsorbed on the amidoxime-chitosan/cellulose hydrogels in the following adsorptivity order: Cu ≈ Ag > Ni > Zn. The adsorptivity of the metal ions increased with pH due to a proton exchange reaction. From the Langmuir adsorption isotherm, the Langmuir constant for Cu exceeded those of other metals because amidoxime has higher Cu affinity. The pseudo-second-order reaction model best described the adsorption kinetics with metal chelate formation being the rate-determining step. Because amidoxime-chitosan/cellulose hydrogels had higher physical stability and higher Cu selectivity, they were found to be a promising, environmentally benign adsorbent.

Analysis of the Cd(II) Adsorption Performance and Mechanisms by Soybean Root Biochar: Effect of Pyrolysis Temperatures

As one of the most harmful environmental pollutants, cadmium (Cd) has arisen much interest, and many researches have been carried out to study the adsorption of heavy metals by biochar, but the mechanisms were poorly explored and the roles components in biochar played are still indistinct. In this study, we evaluated the adsorption capacities and mechanisms of soybean root biochar pyrolyzed at four different temperatures. The results indicate the biochar properties are significantly determined by pyrolysis temperature, which affects the removal mechanisms of Cd(II) consequently. Microstructure characteristics and mechanism analysis further suggest that Cd(II)-π interactions and sulfur-containing functional groups are the main mechanisms of Cd(II) adsorption. This work shows a new perspective to explain the adsorption mechanisms onto biochar adsorbents and has a benefit for the exploitation of economical and effective adsorbents for Cd(II) removal based on biochars.

Electrochemical recovery and high value-added reutilization of heavy metal ions from wastewater: Recent advances and future trends

Wastewater treatment for heavy metals is currently transitioning from pollution remediation towards resource recovery. As a controllable and environment-friendly method, electrochemical technologies have recently gained significant attention. However, there is a lack of systematic and goal oriented summarize of electrochemical metal recovery techniques, which has inhibited the optimized application of these methods. This review aims at recent advances in electrochemical metal recovery techniques, by comparing different electrochemical recovery methods, attempts to target recycling heavy metal resources with minimize energy consumption, boost recovery efficiency and realize the commercial application. In this review, different electrochemical recovery methods (including E-adsorption recovery, E-oxidation recovery, E-reduction recovery, and E-precipitation recovery) for recovering heavy metals are introduced, followed an analysis of their corresponding mechanisms, influencing factors, and recovery efficiencies. In addition, the mass transfer efficiency can be promoted further through optimizing electrodes and reactors, and multiple technologies (photo-electrochemical and sono-electrochemical) could to be used synergistically improve recovery efficiencies. Finally, the most promising directions for electrochemical recovery of heavy metals are discussed along with the challenges and future opportunities of electrochemical technology in recycling heavy metals from wastewater.

A pie-like structure double-sidedly assembled with ZnO-nanodisks vertically on Cu-nanoplates and its photochemical properties

A novel pie-like structure of vertically stacked ZnO-nanodisks on Cu-nanoplates interlayer is prepared for the first time by a facile synthesis. The photochemical activity of the as-prepared samples was evaluated by the degradation of Rhodamine B (RhB) under UV-light. Because of the formation of heterojunction and closely-bonded layered structure, the novel nanocomposites can restrain the recombination of charge carriers and have better collection ability of light. The photocatalytic experiments show that the composites are 258% of the catalytic activity of pure ZnO-nanodisks prepared by the same method, and the target pollutant RhB was almost completely degraded (96.5%) within only 10 mins. The novel Cu-nanoplates/ZnO-nanodisks assembled materials with greatly promoted performance are of significant interest for chemical and environmental applications.

Aminophosphonic Acid Functionalized Cellulose Nanofibers for Efficient Extraction of Trace Metal Ions

Cellulose nanofibers were covalently functionalized using diethylenetriamine penta (methylene phosphonic acid) and studied for the extraction of heavy metal ions. The surface-functionalized nanofibers showed a high adsorption capacity towards heavy metal ions as compared to bare nanofibers. The elemental composition and surface morphology of the prepared bio-adsorbent was characterized by X-ray photoelectron spectroscopy, attenuated total reflectance infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive spectroscopy. The prepared material was studied to develop a column-based solid phase extraction method for the preconcentration of trace metal ions and their determination by inductively coupled plasma optical emission spectroscopy. The batch experimental data was well fitted to Langmuir adsorption isotherms (R2 > 0.99) and follows pseudo-second-order kinetics. The experimental variables such as sample pH, equilibrium time, column breakthrough, sorption flow rate, the effect of coexisting ions, and eluent type were systematically studied and optimized accordingly. The detection limit of the proposed method was found to be 0.03, 0.05, and 0.04 µg L-1 for Cu(II), Pb(II), and Cd(II), respectively. Certified Reference Materials were analyzed to validate the proposed method against systematic and constant errors. At a 95% confidence level, the Student's t-test values were less than the critical Student's t value (4.302). The developed method was successfully employed for the preconcentration and determination of trace metal ions from real water samples such as river water and industrial effluent.

Green Treatment of Phosphate from Wastewater Using a Porous Bio-Templated Graphene Oxide/MgMn-Layered Double Hydroxide Composite

Excessive phosphorus in water is the primary culprit for eutrophication, which causes approximately $2.2 billion annual economic loss in the United States. This study demonstrates a phosphate-selective sustainable method by adopting Garcinia subelliptica leaves as a natural bio-template, where MgMn-layered double hydroxide (MgMn-LDH) and graphene oxide (GO) can be grown in situ to obtain L-GO/MgMn-LDH. After calcination, the composite shows a hierarchical porous structure and selective recognition of phosphate, which achieves significantly high and recyclable selective phosphate adsorption capacity and desorption rate of 244.08 mg-P g-1 and 85.8%, respectively. The detail variation of LDHs during calcination has been observed via in situ transmission electron microscope (TEM). Moreover, the roles in facilitating phosphate adsorption and antimicrobial ability of chemical constituents in Garcinia subelliptica leaves, biflavonoids, and triterpenoids have been investigated. These results indicate the proposed bio-templated adsorbent is practical and eco-friendly for phosphorus sustainability in commercial wastewater treatment.

A review on exploration of Fe2O3 photocatalyst towards degradation of dyes and organic contaminants

Photocatalytic degradation is among the promising technology for removal of various dyes and organic contaminants from environment owing to its excellent catalytic activity, low energy utilization, and low cost. As one of potential photocatalysts, Fe₂O₃ has emerged as an important material for degradation of numerous dyes and organic contaminants caused by its tolerable band gap, wide harvesting of visible light, good stability and recyclability. The present review thoroughly summarized the classification, synthesis route of Fe₂O₃ with different morphologies, and several modifications of Fe₂O₃ for improved photocatalytic performance. These include the incorporation with supporting materials, formation of heterojunction with other semiconductor photocatalysts, as well as the fabrication of Z-scheme. Explicitly, the other photocatalytic applications of Fe₂O₃, including for removal of heavy metals, reduction of CO₂, evolution of H₂, and N₂ fixation are also deliberately discussed to further highlight the huge potential of this catalyst. Moreover, the prospects and future challenges are also comprised to expose the unscrutinized criteria of Fe₂O₃ photocatalyst. This review aims to contribute a knowledge transfer for providing more information on the potential of Fe₂O₃ photocatalyst. In the meantime, it might give an idea for utilization of this photocatalyst in other environmental remediation application.

Zeolite Cotton in Tube: A Simple Robust Household Water Treatment Filter for Heavy Metal Removal

It is challenging to develop a low-cost household water treatment (HWT) that simultaneously deliver an effective and robust way for safe and reliable water supply. Here, we report a simple flow-through filter made by zeolite-cotton packing in a tube (ZCT) as low-cost HWT device to remove heavy metal ions from contaminated water. The zeolite-cotton is fabricated by an on-site template-free growth route that tightly binds mesoporous single-crystal chabazite zeolite onto the surface of cotton fibers. As a result, the ZCT set-up with optimized diameter achieves both high adsorption efficiency, proper flow rate, reliable supply and strong stability at the same time. After flowed through the set up packed with 10 g of zeolite-cotton, 65 mL 1000 ppm Cu²⁺ solution was purified down to its safety limit (<1 ppm). Notably, their efficiency remains unaltered when filtering several ions simultaneously. In a simulated purification process, 8 L of water contaminated by Cu²⁺, Cd²⁺ and Pb²⁺ could be transformed into drinking water and it enables the removal of heavy metals to concentrations of below 5 ppb (μg L⁻¹). We also show that the ZCT can be used for disinfection by introducing Ag-exchanged zeolite-cotton without contaminating the water with Ag ions (<0.05 ppm).

Synthesis of an ultra-thin Ni-membrane/ZnO-nanorod grass clump-like composite and its enhanced photocatalysis

The base metal flexible Ni membrane with ZnO array on both sides effectively promotes the separation of electron–hole pairs.

Rational structural design of ZnOHF nanotube-assembled microsphere adsorbents for high-efficient Pb2+ removal

Hierarchical nanotube-assembled ZnOHF microspheres were prepared via an amino acid assisted hydrothermal method, which can remove Pb²⁺ efficiently in an aqueous environment.

Unexpectedly High Adsorption Capacity of Esterified Hydroxyapatite for Heavy Metal Removal

Nanohydroxyapatite (n-HAP) as an environmentally friendly adsorbent of heavy metal ions still requires the rational design of the pore structure and surface characteristic for enhancing their adsorption capacity toward heavy metal ions. A novel one-step strategy was developed to regulate the pore structure and surface characteristic of esterified HAP (n-EHAP) nanocrystals (NCs) for enhancing the adsorption capacity by incorporation of 2-bromo-2-methylpropionate (2-BrMP) groups on the surface of n-EHAP NCs. When using water as the sole solvent, the aggregation of n-EHAP NCs became unavoidable because of incorporation of hydrophobic 2-BrMP groups on n-HAP particle surfaces. The synthesis of uniform and individual n-EHAP NCs was achieved by rational adjustment of the aqueous dispersion medium to avoid agglomeration and precipitation, which was induced by the changing surface characteristic of n-EHAP NCs during the continuing incorporation of hydrophobic 2-BrMP groups in the water/acetone system. The successful incorporation of hydrophobic 2-BrMP groups on the surface of n-EHAP NCs was characterized by X-ray powder diffraction, field-emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and liquid nitrogen adsorption isotherms. To explore the potential application in water treatment, a series of systematically designed batch experiments were conducted to determine the influences of the adsorbent dosage, solution pH, and contact time on the adsorption behavior of n-EHAP NCs. Experimental results indicated that the addition of water-soluble acetone greatly promoted the formation of individual n-EHAP NCs without aggregation, and furthermore, the successful incorporation of hydrophobic 2-BrMP groups led to formation of porously structured n-EHAP NCs with a higher surface area and an increasing micro-/mesopore ratio. Compared with pristine n-HAP, n-EHAP NCs exhibited lower crystallinity with smaller crystallite size and demonstrated an ultrahigh adsorption capacity for Pb(II) in acidic solution with a record of close to 2400 mg/g. The improved performance of n-EHAP NCs originated from both the suitable porous structure with a higher micro-/mesoporosity ratio and the existing tethered 2-BrMP group-induced the ester bond, providing more adsorption active affinity sites for heavy metal ions. The highly efficient adsorption (99.99%) was further achieved using tap water spiked with traces of Pb(II) (63 ppb). The presented findings promise the application of n-EHAP NCs in water treatment as an alternative, low-cost, and ecofriendly adsorbent for environmental remediation.

Self-Assembled Naphthylidene-Containing Schiff Base Anchored Polystyrene Nanocomposites Targeted for Selective Cu(II) Ion Removal from Wastewater

Self-assembled composite adsorbents that combine the controllability of self-assembly with a mild operation process are promising for removal of heavy metal ions in wastewater. The design and preparation of functionalized composite adsorbent materials with multiple-site adsorption ability remain the most attractive in effectively removing heavy metal ions. Inspired by the macroporous structure of charged polystyrene (PS) resin and chelation of Schiff bases with heavy metal ions, smart composite adsorbents are constructed based on the combination and synergistic effect of multiple hydrophobic, π-π stacking, and electrostatic noncovalent interactions between polystyrene resin and naphthylidene-containing Schiff base (NSB). The resulting hybrid nanomaterials (PS-NSB) have uniform porous structures and well-defined and multiple target sites. These properties promote diffusion of the target ion, increase the binding site, and enhance the removal efficacy. This study offers a new strategy to harness a self-assembled Schiff base with integrated flexibility and multifunctions to enhance target metal ion specific binding and removal effects, highlighting opportunities to develop smart composite adsorbents.

Bifunctional nano-Ag3PO4 with capabilities of enhancing ceftazidime for sterilization and removing residues

Since the efficacy of antibiotics towards bacteria is decreasing over time, the rising of antibiotic emission has become an increasingly grave issue. In this study, we proposed an integrated antibacterial nanotechnology without pollution residues, which synergistically enhances the antibacterial activity of ceftazidime by using the inorganic nano-Ag3PO4, and subsequently removes drug residues by photocatalysis. Ag3PO4 were synthesized using a simple ion-exchange method without any reducing agent or protectant. The combined antibacterial activity of Ag3PO4 and 22 kinds of antibiotics against Escherichia coli was first studied. The results showed that Ag3PO4 and ceftazidime exhibited the best synergistic effect. Next, the synergy mechanism was proposed, the non-chemical bond forces between Ag3PO4 and ceftazidime was determined by zeta potential analyzer, X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR). The interaction between antimicrobials and bacteria was further demonstrated by surface plasma resonance spectroscopy (SPR), scanning electron microscopy (SEM) and propidium iodide (PI) staining. In addition, the production of reactive oxygen species (ROS), the induction of oxidative stress and dissolution of silver ions in Ag3PO4 were studied and found out that only under light, could the ROS be generated. In conclusion, the synergistic effect of Ag3PO4 and ceftazidime is responsible for the joint destruction of cell wall.

Rate-controlled nano-layered assembly mechanism of melamine-induced melamine–uric acid stones and its inhibition and elimination methods

The formation of kidney stones induced by melamine is a rate-controlled nano-scale supramolecular layered assembly process.

The targeted design of dual-functional metal–organic frameworks (DF-MOFs) as highly efficient adsorbents for Hg2+ ions: synthesis for purpose

Designing adsorbents with accessible chelating sites and achieving high contaminant purification efficiency are still important to overcome environmental remediation challenges.