Ozone- and Hydroxyl Radical-Mediated Oxidation of Pharmaceutical Compounds Using Ni-Doped Sb-SnO2 Anodes: Degradation Kinetics and Transformation Products

Novel Synthesis Pathways for Highly Oxidative Iron Species: Generation, Stability, and Treatment Applications of Ferrate(IV/V/VI)

Difficulties arise related to the economy-of-scale and practicability in applying conventional water treatment technologies to small and remote systems. A promising oxidation technology better suited for these applications is that of electro-oxidation (EO), whereby contaminants are degraded via direct, advanced, and/or electrosynthesized oxidant-mediated reactions. One species of oxidants of particular interest includes ferrates (Fe(VI)/(V)/(IV)), where only recently has their circumneutral synthesis been demonstrated, using high oxygen overpotential (HOP) electrodes, namely boron-doped diamond (BDD). In this study, the generation of ferrates using various HOP electrodes (BDD, NAT/Ni-Sb-SnO2, and AT/Sb-SnO2) was investigated. Ferrate synthesis was pursued in a current density range of 5-15 mA cm-2 and initial Fe3+ concentrations of 10-15 mM. Faradaic efficiencies ranged from 11-23%, depending on operating conditions, with BDD and NAT significantly outperforming AT electrodes. Speciation tests revealed that NAT synthesizes both ferrate(IV/V) and ferrate(VI), while the BDD and AT electrodes synthesized only ferrate(IV/V) species. A number of organic scavenger probes were used to test the relative reactivity, including nitrobenzene, carbamazepine, and fluconazole, whereby ferrate(IV/V) was significantly more oxidative than ferrate(VI). Finally, the ferrate(VI) synthesis mechanism by NAT electrolysis was elucidated, where coproduction of ozone was found to be a key phenomenon for Fe3+ oxidation to ferrate(VI).

Electro-Fenton and Induced Electro-Fenton as Versatile Wastewater Treatment Processes for Decontamination and Nutrient Removal without Byproduct Formation

It is a long-pursued goal to develop electrified water treatment technology that can remove contaminants without byproduct formation. This study unveiled the overlooked multifunctionality of electro-Fenton (EF) and induced EF (I-EF) processes to remove organics, pathogens, and phosphate in one step without halogenated byproduct formation. The EF and I-EF processes used a sacrificial anode or an induced electrode to generate Fe2+ to activate H2O2 produced from a gas diffusion cathode fed by naturally diffused air. We used experimental and kinetic modeling approaches to illustrate that the •OH generation and radical speciation during EF were not impacted by chloride. More importantly, reactive chlorine species were quenched by H2O2, which eliminated the formation of halogenated byproducts. When applied in treating septic wastewater, the EF process removed >80% COD, >50% carbamazepine (as representative trace organics), and >99% phosphate at a low energy consumption of 0.37 Wh/L. The EF process also demonstrated broad-spectrum disinfection activities in removing and inactivating Escherichia coli, Enterococcus durans, and model viruses MS2 and Phi6. In contrast to electrochemical oxidation (EO) that yielded mg/L level byproducts to achieve the same degree of treatment, EF did not generate byproducts (chlorate, perchlorate, trihalomethanes, and haloacetic acids). The I-EF carried over all the advantages of EF and exhibited even faster kinetics in disinfection and carbamazepine removal with 50-80% less sludge production. Last, using septic wastewater treatment as a technical niche, we demonstrated that iron sludge formation is predictable and manageable, clearing roadblocks toward on-site water treatment applications.

Molecularly imprinted polymers (MIPs) as efficient catalytic tools for the oxidative degradation of 4-nonylphenol and its by-products

Water pollution is a current global concern caused by emerging pollutants like nonylphenol (NP). This endocrine disruptor cannot be efficiently removed with traditional wastewater treatment plants (WTPs). Therefore, this work aimed to evaluate the adsorption influence of molecularly imprinted polymers (MIPs) on the oxidative degradation (ozone and ultraviolet irradiations) of 4-nonylphenol (4-NP) and its by-products as a coadjuvant in WTPs. MIPs were synthesized and characterized; the effect of the degradation rate under system operating conditions was studied by Box-Behnken response surface design of experiments. The variables evaluated were 4-NP concentration, ozone exposure time, pH, and MIP amount. Results show that the MIPs synthesized by co-precipitation and bulk polymerizations obtained the highest retention rates (> 90%). The maximum adsorption capacities for 4-NP were 201.1 mg L-1 and 500 mg L-1, respectively. The degradation percentages under O3 and UV conditions reached 98-100% at 120 s of exposure at different pHs. The degradation products of 4-NP were compounds with carboxylic and ketonic acids, and the MIP adsorption was between 50 and 60%. Our results present the first application of MIPs in oxidation processes for 4-NP, representing starting points for the use of highly selective materials to identify and remove emerging pollutants and their degradation by-products in environmental matrices.