Unique Base-Initiated Depolymerization of Limonene-Derived Polycarbonates

Closed-Loop Recycling of Mixed Plastics of Polyester and CO2-Based Polycarbonate to a Single Monomer

Physical blending is an effective strategy for tailoring polymeric materials to specific application requirements. However, physically blended mixed plastics waste adds additional barriers in mechanical or chemical recycling. This difficulty arises from the intricate requirement for meticulous sorting and separation of the various polymers in the inherent incompatibility of mixed polymers during recycling. To overcome this impediment, this work furthers the emerging single-monomer - multiple-materials approach through the design of a bifunctional monomer that can not only orthogonally polymerize into two different types of polymers - specifically lactone-based polyester and CO2-based polycarbonate - but the resultant polymers and their mixture can also be depolymerized back to the single, original monomer when facilitated by catalysis. Specifically, the lactone/epoxide hybrid bifunctional monomer (BiLO) undergoes ring-opening polymerization through the lactone manifold to produce polyester, PE(BiLO), and is also applied to ring-opening copolymerization with CO2, via the epoxide manifold, to yield polycarbonate, PC(BiLO). Remarkably, a one-pot recycling process of a BiLO-derived PE/PC blend back to the constituent monomer BiLO in >99 % selectivity was achieved with a superbase catalyst at 150 °C, thereby effectively obviating the requirement for sorting and separation typically required for recycling of mixed polymers.

Chemical Recycling of Poly(cyclohexene carbonate)s via Synergistic Catalysis

Chemical recycling of polymers to the corresponding monomers offers a valuable solution to address the current plastics crisis for creating an ideal and circular polymer economy. Here, we present a bimetallic synergistic depolymerization of the widely studied CO2-based polycarbonates, poly(cyclohexene carbonate)s, to epoxide monomers efficiently. The bimetallic CrIII-complex-mediated highly selective depolymerization and repolymerization was achieved via the regulation of reaction temperature, thus closing the circular loop of poly(cyclohexene carbonate)s in situ. Mechanistic investigation has revealed that the formation of epoxides undergoes a direct chain-end unzipping process. A bimetallic catalysis involving a nucleophilic attack of the metal-alkoxide species toward the methine carbon atom bound with an adjacent carbonyl that is activated by the other metal center features a lower energy barrier in DFT calculations, which promotes the epoxide extrusion.

Controlled Carbon Dioxide Terpolymerizations to Deliver Toughened yet Recyclable Thermoplastics

Using CO2 polycarbonates as engineering thermoplastics has been limited by their mechanical performances, particularly their brittleness. Poly(cyclohexene carbonate) (PCHC) has a high tensile strength (40 MPa) but is very brittle (elongation at break <3%), which limits both its processing and applications. Here, well-defined, high molar mass CO2 terpolymers are prepared from cyclohexene oxide (CHO), cyclopentene oxide (CPO), and CO2 by using a Zn(II)Mg(II) catalyst. In the catalysis, CHO and CPO show reactivity ratios of 1.53 and 0.08 with CO2, respectively; as such, the terpolymers have gradient structures. The poly(cyclohexene carbonate)-grad-poly(cyclopentene carbonate) (PCHC-grad-PCPC) have high molar masses (86 < Mn < 164 kg mol-1, ĐM < 1.22) and good thermal stability (Td > 250 °C). All the polymers are amorphous with a single, high glass transition temperature (96 < Tg < 108 °C). The polymer entanglement molar masses, determined using dynamic mechanical analyses, range from 4 < Me < 23 kg mol-1 depending on the polymer composition (PCHC:PCPC). These polymers show superior mechanical performance to PCHC; specifically the lead material (PCHC0.28-grad-PCPC0.72) shows 25% greater tensile strength and 160% higher tensile toughness. These new plastics are recycled, using cycles of reprocessing by compression molding (150 °C, 1.2 ton m-2, 60 min), four times without any loss in mechanical properties. They are also efficiently chemically recycled to selectively yield the two epoxide monomers, CHO and CPO, as well as carbon dioxide, with high activity (TOF = 270-1653 h-1, 140 °C, 120 min). The isolated recycled monomers are repolymerized to form thermoplastic showing the same material properties. The findings highlight the benefits of the terpolymer strategy to deliver thermoplastics combining the beneficial low entanglement molar mass, high glass transition temperatures, and tensile strengths; PCHC properties are significantly improved by incorporating small quantities (23 mol %) of cyclopentene carbonate linkages. The general strategy of designing terpolymers to include chain segments of low entanglement molar mass may help to toughen other brittle and renewably sourced plastics.

Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy

Polyesters carrying polar main-chain ester linkages exhibit distinct material properties for diverse applications and thus play an important role in today's plastics economy. It is anticipated that they will play an even greater role in tomorrow's circular plastics economy that focuses on sustainability, thanks to the abundant availability of their biosourced building blocks and the presence of the main-chain ester bonds that can be chemically or biologically cleaved on demand by multiple methods and thus bring about more desired end-of-life plastic waste management options. Because of this potential and promise, there have been intense research activities directed at addressing recycling, upcycling or biodegradation of existing legacy polyesters, designing their biorenewable alternatives, and redesigning future polyesters with intrinsic chemical recyclability and tailored performance that can rival today's commodity plastics that are either petroleum based and/or hard to recycle. This review captures these exciting recent developments and outlines future challenges and opportunities. Case studies on the legacy polyesters, poly(lactic acid), poly(3-hydroxyalkanoate)s, poly(ethylene terephthalate), poly(butylene succinate), and poly(butylene-adipate terephthalate), are presented, and emerging chemically recyclable polyesters are comprehensively reviewed.

DFT Studies of the Activity and Reactivity of Limonene in Comparison with Selected Monoterpenes

Nowadays, the effective processing of natural monoterpenes that constitute renewable biomass found in post-production waste into products that are starting materials for the synthesis of valuable compounds is a way to ensure independence from non-renewable fossil fuels and can contribute to reducing global carbon dioxide emissions. The presented research aims to determine, based on DFT calculations, the activity and reactivity of limonene, an organic substrate used in previous preparative analyses, in comparison to selected monoterpenes such as cymene, pinene, thymol, and menthol. The influence of the solvent model was also checked, and the bonds most susceptible to reaction were determined in the examined compounds. With regard to EHOMO, it was found that limonene reacts more easily than cymene or menthol but with more difficultly than thymol and pienene. The analysis of the global chemical reactivity descriptors "locates" the reactivity of limonene in the middle of the studied monoterpenes. It was observed that, among the tested compounds, the most reactive compound is thymol, while the least reactive is menthol. The demonstrated results can be a reference point for experimental work carried out using the discussed compounds, to focus research on those with the highest reactivity.

Evaluating Heterodinuclear Mg(II)M(II) (M = Mn, Fe, Ni, Cu, and Zn) Catalysts for the Chemical Recycling of Poly(cyclohexene carbonate)

Polymer chemical recycling to monomers (CRM) is important to help achieve a circular plastic economy, but the "rules" governing catalyst design for such processes remain unclear. Here, carbon dioxide-derived polycarbonates undergo CRM to produce epoxides and carbon dioxide. A series of dinuclear catalysts, Mg(II)M(II) where M(II) = Mg, Mn, Fe, Co, Ni, Cu, and Zn, are compared for poly(cyclohexene carbonate) depolymerizations. The recycling is conducted in the solid state, at 140 °C monitored using thermal gravimetric analyses, or performed at larger-scale using laboratory glassware. The most active catalysts are, in order of decreasing rate, Mg(II)Co(II), Mg(II)Ni(II), and Mg(II)Zn(II), with the highest activity reaching 8100 h-1 and with >99% selectivity for cyclohexene oxide. Both the activity and selectivity values are the highest yet reported in this field, and the catalysts operate at low loadings and moderate temperatures (from 1:300 to 1:5000, 140 °C). For the best heterodinuclear catalysts, the depolymerization kinetics and activation barriers are determined. The rates in both reverse depolymerization and forward CHO/CO2 polymerization catalysis show broadly similar trends, but the processes feature different intermediates; forward polymerization depends upon a metal-carbonate intermediate, while reverse depolymerization depends upon a metal-alkoxide intermediate. These dinuclear catalysts are attractive for the chemical recycling of carbon dioxide-derived plastics and should be prioritized for recycling of other oxygenated polymers and copolymers, including polyesters and polyethers. This work provides insights into the factors controlling depolymerization catalysis and steers future recycling catalyst design toward exploitation of lightweight and abundant s-block metals, such as Mg(II).

Bicyclic Guanidine Promoted Mechanistically Divergent Depolymerization and Recycling of a Biobased Polycarbonate

We here report the organocatalytic and temperature-controlled depolymerization of biobased poly(limonene carbonate) providing access to its trans-configured cyclic carbonate as the major product. The base TBD (1,5,7-triazabicyclo[4.4.0]dec-5-ene) offers a unique opportunity to break down polycarbonates via end-group activation or main chain scission pathways as supported by various controls and computational analysis. These energetically competitive processes represent an unprecedented divergent approach to polycarbonate recycling. The trans limonene carbonate can be converted back to its polycarbonate via ring-opening polymerization using the same organocatalyst in the presence of an alcohol initiator, offering thus a potential circular and practical route for polycarbonate recycling.

Toughening CO2 -Derived Copolymer Elastomers Through Ionomer Networking

Utilizing carbon dioxide (CO2 ) to make polycarbonates through the ring-opening copolymerization (ROCOP) of CO2 and epoxides valorizes and recycles CO2 and reduces pollution in polymer manufacturing. Recent developments in catalysis provide access to polycarbonates with well-defined structures and allow for copolymerization with biomass-derived monomers; however, the resulting material properties are underinvestigated. Here, new types of CO2 -derived thermoplastic elastomers (TPEs) are described together with a generally applicable method to augment tensile mechanical strength and Young's modulus without requiring material re-design. These TPEs combine high glass transition temperature (Tg ) amorphous blocks comprising CO2 -derived poly(carbonates) (A-block), with low Tg poly(ε-decalactone), from castor oil, (B-block) in ABA structures. The poly(carbonate) blocks are selectively functionalized with metal-carboxylates where the metals are Na(I), Mg(II), Ca(II), Zn(II) and Al(III). The colorless polymers, featuring <1 wt% metal, show tunable thermal (Tg ), and mechanical (elongation at break, elasticity, creep-resistance) properties. The best elastomers show >50-fold higher Young's modulus and 21-times greater tensile strength, without compromise to elastic recovery, compared with the starting block polymers. They have wide operating temperatures (-20 to 200 °C), high creep-resistance and yet remain recyclable. In the future, these materials may substitute high-volume petrochemical elastomers and be utilized in high-growth fields like medicine, robotics, and electronics.

Advances in the Synthesis of Chemically Recyclable Polymers

The development of modern society is closely related to polymer materials. However, the accumulation of polymer materials and their evolution in the environment causes not only serious environmental problems, but also waste of resources. Although physical processing can be used to reuse polymers, the properties of the resulting polymers are significantly degraded. Chemically recyclable polymers, a type of polymer that degrades into monomers, can be an effective solution to the degradation of polymer properties caused by physical recycling of polymers. The ideal chemical recycling of polymers, i. e., quantitative conversion of the polymer to monomers at low energy consumption and repolymerization of the formed monomers into polymers with comparable properties to the original, is an attractive research goal. In recent years, significant progress has been made in the design of recyclable polymers, enabling the regulation of the "polymerization-depolymerization" equilibrium and closed-loop recycling under mild conditions. This review will focus on the following aspects of closed-loop recycling of poly(sulfur) esters, polycarbonates, polyacetals, polyolefins, and poly(disulfide) polymer, illustrate the challenges in this area, and provide an outlook on future directions.

Tough while Recyclable Plastics Enabled by Monothiodilactone Monomers

The current scale of plastics production and the attendant waste disposal issues represent an underexplored opportunity for chemically recyclable polymers. Typical recyclable polymers are subject to the trade-off between the monomer's polymerizability and the polymer's depolymerizability as well as insufficient performance for practical applications. Herein, we demonstrate that a single atom oxygen-by-sulfur substitution of relatively highly strained dilactone is an effective and robust strategy for converting the "non-recyclable" polyester into a chemically recyclable polymer by lowering the ring strain energy in the monomer (from 16.0 kcal mol^-1 in dilactone to 9.1 kcal mol^-1 in monothiodilactone). These monothio-modification monomers enable both high/selective polymerizability and recyclability, otherwise conflicting features in a typical monomer, as evidenced by regioselective ring-opening, minimal transthioesterifications, and quantitative recovery of the pristine monomer. Computational and experimental studies demonstrate that an n→π* interaction between the adjacent ester and thioester in the polymer backbone has been implicated in the high selectivity for propagation over transthioesterification. The resulting polymer demonstrates high performance with its mechanical properties being comparable to some commodity polyolefins. Thio-modification is a powerful strategy for enabling conversion of six-membered dilactones into chemically recyclable and tough thermoplastics that exhibit promise as next-generation sustainable polymers.

Solid-State Chemical Recycling of Polycarbonates to Epoxides and Carbon Dioxide Using a Heterodinuclear Mg(II)Co(II) Catalyst

Polymer chemical recycling to monomers (CRM) could help improve polymer sustainability, but its implementation requires much better understanding of depolymerization catalysis, ensuring high rates and selectivity. Here, a heterodinuclear [Mg(II)Co(II)] catalyst is applied for CRM of aliphatic polycarbonates, including poly(cyclohexene carbonate) (PCHC), to epoxides and carbon dioxide using solid-state conditions, in contrast with many other CRM strategies that rely on high dilution. The depolymerizations are performed in the solid state giving very high activity and selectivity (PCHC, TOF = 25700 h^–1, CHO selectivity >99 %, 0.02 mol %, 140 °C). Reactions may also be performed in air without impacting on the rate or selectivity of epoxide formation. The depolymerization can be performed on a 2 g scale to isolate the epoxides in up to 95 % yield with >99 % selectivity. In addition, the catalyst can be re-used four times without compromising its productivity or selectivity.

Efficient and Selective Chemical Recycling of CO2 -Based Alicyclic Polycarbonates via Catalytic Pyrolysis

Chemical recycling of polymers to their constituent monomers is the foremost challenge in building a sustainable circular plastics economy. Here, we report a strategy for highly efficient depolymerization of various CO₂ -based alicyclic polycarbonates to epoxide monomers in solvent-free conditions by a simple Cr^III -Salen complex mediated catalytic pyrolysis process. The chemical recycling of the widely studied poly(cyclohexene carbonate) exhibits excellent reactivity (TOF up to 3000 h^-1 , 0.1 mol % catalyst loading) and high epoxide monomer selectivity (>99 %). Mechanistic investigation reveals that the process proceeds in a sequential fashion via a trans-carbonate intermediate.

Chemical Recycling of Poly(Cyclohexene Carbonate) Using a Di-MgII Catalyst

Chemical recycling of polymers to true monomers is pivotal for a circular plastics economy. Here, the first catalyzed chemical recycling of the widely investigated carbon dioxide derived polymer, poly(cyclohexene carbonate), to cyclohexene oxide and carbon dioxide is reported. The reaction requires dinuclear catalysis, with the di-Mg^II catalyst showing both high monomer selectivity (>98 %) and activity (TOF=150 h^-1 , 0.33 mol %, 120 °C). The depolymerization occurs via a chain-end catalyzed depolymerization mechanism and DFT calculations indicate the high selectivity arises from Mg-alkoxide catalyzed epoxide extrusion being kinetically favorable compared to cyclic carbonate formation.

Lithium achieves sequence selective ring-opening terpolymerisation (ROTERP) of ternary monomer mixtures

Heteroatom-containing degradable polymers have strong potential as sustainable replacements for petrochemically derived materials. However, to accelerate and broaden their uptake greater structural diversity and new synthetic methodologies are required. Here we report a sequence selective ring-opening terpolymerisation (ROTERP), in which three monomers (A, B, C) are selectively enchained into an (ABA'C) n sequence by a simple lithium catalyst. Degradable poly(ester-alt-ester-alt-trithiocarbonate)s are obtained in a M n range from 2.35 to 111.20 kDa which are not easily accessible via other polymerisation methodologies. The choice of alkali metal is key to achieve high activity and to control the terpolymer sequence. ROTERP is mechanistically compatible with ring-opening polymerisation (ROP) allowing switchable catalysis for blockpolymer synthesis. The ROTERP demonstrated in this study could be the first example of an entirely new family of sequence selective terpolymerisations.

Heterodinuclear Mg(II)M(II) (M=Cr, Mn, Fe, Co, Ni, Cu and Zn) Complexes for the Ring Opening Copolymerization of Carbon Dioxide/Epoxide and Anhydride/Epoxide

The catalysed ring opening copolymerizations (ROCOP) of carbon dioxide/epoxide or anhydride/epoxide are controlled polymerizations that access useful polycarbonates and polyesters. Here, a systematic investigation of a series of heterodinuclear Mg(II)M(II) complexes reveals which metal combinations are most effective. The complexes combine different first row transition metals (M(II)) from Cr(II) to Zn(II), with Mg(II); all complexes are coordinated by the same macrocyclic ancillary ligand and by two acetate co-ligands. The complex syntheses and characterization data, as well as the polymerization data, for both carbon dioxide/cyclohexene oxide (CHO) and endo-norbornene anhydride (NA)/cyclohexene oxide, are reported. The fastest catalyst for both polymerizations is Mg(II)Co(II) which shows propagation rate constants (k_p ) of 34.7 mM^-1  s^-1 (CO₂ ) and 75.3 mM^-1  s^-1 (NA) (100 °C). The Mg(II)Fe(II) catalyst also shows excellent performances with equivalent rates for CO₂ /CHO ROCOP (k_p =34.7 mM^-1  s^-1 ) and may be preferable in terms of metallic abundance, low cost and low toxicity. Polymerization kinetics analyses reveal that the two lead catalysts show overall second order rate laws, with zeroth order dependencies in CO₂ or anhydride concentrations and first order dependencies in both catalyst and epoxide concentrations. Compared to the homodinuclear Mg(II)Mg(II) complex, nearly all the transition metal heterodinuclear complexes show synergic rate enhancements whilst maintaining high selectivity and polymerization control. These findings are relevant to the future design and optimization of copolymerization catalysts and should stimulate broader investigations of synergic heterodinuclear main group/transition metal catalysts.

Highly Reactive Cyclic Carbonates with a Fused Ring toward Functionalizable and Recyclable Polycarbonates

Monomer design plays an important role in the development of polymers with desired thermal properties and chemical recyclability. Here we prepared a class of seven-membered ring carbonates containing trans-cyclohexyl fused rings. These monomers showed excellent activity for ring-opening polymerization (ROP) with turnover frequency (TOF) up to 6 × 10⁵ h^-1 and catalyst loading down to 50 ppm, which yielded high-molecular-weight polycarbonates (M_n up to 673 kg/mol) with great thermostability (T_d > 300 °C). Ultimately, the resulting polycarbonates can completely depolymerize into their corresponding cyclic dimers that can repolymerize to synthesize the starting polymers in moderate yields, demonstrating a potential route to achieve chemical recycling. Postfunctionalization of the unsaturated polycarbonate was conducted through cross-linking reaction and "click" reaction under UV irradiation.

Sustainable Approach for Synthesis and Completely Recycle of Cyclic CO2-based Polycarbonates

It is highly desirable to reduce the environmental pollution related to the disposal of end-of-life plastics. Polycarbonates derived from the copolymerization of CO₂ and epoxides have attracted much attention since they can enable CO₂-fixation and furnish biorenewable and degradable polymeric materials. So far, only linear CO₂-based polycarbonates have been reported and typically degraded to cyclic carbonates. Here we synthesize a homogeneous dinuclear methyl zinc catalyst ((BDI-ZnMe)₂, 1) to rapidly copolymerize meso-CHO and CO₂ into poly(cyclohexene carbonate) (PCHC) with an unprecedentedly cyclic structure. Moreover, in the presence of trace amounts of water, a heterogeneous multi-nuclear zinc catalyst ((BDI-(ZnMe₂·xH₂O))_n, 2) is prepared and shows up to 99% selectivity towards the degradation of PCHC back to meso-CHO and CO₂. This strategy not only achieves the first case of cyclic CO₂-based polycarbonate but also realizes the complete chemical recycling of PCHC back to its monomers, representing closed-loop recycling of CO₂-based polycarbonates.

It is highly desirable to reduce the environmental pollution related to the disposal of end-of-life plastics.

Biobased High-Performance Aromatic-Aliphatic Polyesters with Complete Recyclability

The development of high-performance recyclable polymers represents a circular plastics economy to address the urgent issues of plastic sustainability. Herein, we design a series of biobased seven-membered-ring esters containing aromatic and aliphatic moieties. Ring-opening polymerization studies showed that they readily polymerize with excellent activity (TOF up to 2.1 × 10⁵ h^-1) at room temperature and produce polymers with high molecular weight (M_n up to 438 kg/mol). The variety of functionalities allows us to investigate the substitution effect on polymerizability/recyclability of monomers and properties of polymers (such as T_gs from -1 to 79 °C). Remarkably, a stereocomplexed P(M2) exhibited significantly increased T_m and crystallization rate. More importantly, product P(M)s were capable of depolymerizing into their monomers in solution or bulk with high efficiency, thus establishing their circular life cycle.

Overcoming the Low Driving Force in Forming Depolymerizable Polymers through Monomer Isomerization

While depolymerizable polymers have been intensely pursued as a potential solution to address the challenges in polymer sustainability, most depolymerization systems are characterized by a low driving force in polymerization, which poses difficulties for accessing diverse functionalities and architectures of polymers. Here, we address this challenge by using a cyclooctene-based depolymerization system, in which the cis-to-trans alkene isomerization significantly increases the ring strain energy to enable living ring-opening metathesis polymerization at monomer concentrations ≥0.025 M. An additional trans-cyclobutane fused at the 5,6-position of the cyclooctene reduces the ring strain energy of cyclooctene, enabling the corresponding polymers to depolymerize into the cis-cyclooctene monomers. The use of excess triphenylphosphine was found to be essential to suppress secondary metathesis and depolymerization. The high-driving-force living polymerization of the trans-cyclobutane fused trans-cyclooctene system holds promise for developing chemically recyclable polymers of a wide variety of polymer architectures.

Sequence Control from Mixtures: Switchable Polymerization Catalysis and Future Materials Applications

There is an ever-increasing demand for higher-performing polymeric materials counterbalanced by the need for sustainability throughout the life cycle. Copolymers comprising ester, carbonate, or ether linkages could fulfill some of this demand as their monomer-polymer chemistry is closer to equilibrium, facilitating (bio)degradation and recycling; many monomers are or could be sourced from renewables or waste. Here, an efficient and broadly applicable route to make such copolymers is discussed, a form of switchable polymerization catalysis which exploits a single catalyst, switched between different catalytic cycles, to prepare block sequence selective copolymers from monomer mixtures. This perspective presents the principles of this catalysis, catalyst design criteria, the selectivity and structural copolymer characterization tools, and the properties of the resulting copolymers. Uses as thermoplastic elastomers, toughened plastics, adhesives, and self-assembled nanostructures, and for programmed degradation, among others, are discussed. The state-of-the-art research into both catalysis and products, as well as future challenges and directions, are presented.

Heterocycle/Heteroallene Ring-Opening Copolymerization: Selective Catalysis Delivering Alternating Copolymers

Heteroatom‐containing polymers have strong potential as sustainable replacements for petrochemicals, show controllable monomer–polymer equilibria and properties spanning plastics, elastomers, fibres, resins, foams, coatings, adhesives, and self‐assembled nanostructures. Their current and future applications span packaging, house‐hold goods, clothing, automotive components, electronics, optical materials, sensors, and medical products. An interesting route to these polymers is the catalysed ring‐opening copolymerisation (ROCOP) of heterocycles and heteroallenes. It is a living polymerization, occurs with high atom economy, and creates precise, new polymer structures inaccessible by traditional methods. In the last decade there has been a renaissance in research and increasing examples of commercial products made using ROCOP. It is better known in the production of polycarbonates and polyesters, but is also a powerful route to make N‐, S‐, and other heteroatom‐containing polymers, including polyamides, polycarbamates, and polythioesters. This Review presents an overview of the different catalysts, monomer combinations, and polymer classes that can be accessed by heterocycle/heteroallene ROCOP.

100th Anniversary of Macromolecular Science Viewpoint: Redefining Sustainable Polymers

Although Staudinger realized makromoleküles had enormous potential, he likely did not anticipate the consequences of their universal adoption. With 6.3 billion metric tons of plastic waste now contaminating our land, water, and air, we are facing an environmental and public health crisis. Synthetic polymer chemists can help create a more sustainable future, but are we on the right path to do so? Herein, a comprehensive literature survey reveals that there has been an increased focus on "sustainable polymers" in recent years, but most papers focus on biomass-derived feedstocks. In contrast, there is less focus on polymer end-of-life fates. Moving forward, we suggest an increased emphasis on chemical recycling, which sees value in plastic waste and promotes a closed-loop plastic economy. To help keep us on the path to sustainability, the synthetic polymer community should routinely seek the systems perspective offered by life cycle assessment.

100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics

The current global materials economy has long been inefficient due to unproductive reuse and recycling efforts. Within the wider materials portfolio, plastics have been revolutionary to many industries but they have been treated as disposable commodities leading to their increasing accumulation in the environment as waste. The field of chemistry has had significant bearing in ushering in the current plastics industry and will undoubtedly have a hand in transforming it to become more sustainable. Existing approaches include the development of synthetic biodegradable plastics and turning to renewable raw materials in order to produce plastics similar to our current petrol-based materials or to create new polymers. Additionally, chemists are confronting the environmental crisis by developing alternative recycling methods to deal with the legacy of plastic waste. Important emergent technologies, such as catalytic chemical recycling or upcycling, have the potential to alleviate numerous issues related to our current and future refuse and, in doing so, help pivot our materials economy from linearity to circularity.

Copolymers of ε-caprolactone and ε-caprolactam via polyesterification: towards sequence-controlled poly(ester amide)s

Alternating copolymer of ε-caprolactone and ε-caprolactam is synthesized through polyesterification. This efficient and straightforward strategy holds promising future for the synthesis of sequence-controlled poly(ester amide)s.

From terpenes to sustainable and functional polymers

The use of renewable terpene-based monomers for the preparation of sustainable functional polymers is highlighted.

Repurposing poly(monothiocarbonate)s to poly(thioether)s with organic bases

This work reports a unique one-pot/one-step route to rapidly produce poly(thioether)s from poly(monothiocarbonate) (PMTC), a sulfur-containing polymer, using commercially available organic bases.

Sustainable, Naringenin-Based Thermosets Show Reversible Macroscopic Shape Changes and Enable Modular Recycling

A sustainable biobased thermoset exhibiting shape-memory behavior and modular recycling capabilities has been developed herein. The prepared thermoset consists of naringenin and biocompatible polymer components. Naringenin, which has three phenolic moieties, has been converted to a multifunctional monomer containing glycidyl groups and readily formed a thermosetting network via epoxide ring opening reaction with a poly(ethylene glycol) diacid under solvent-free conditions. The resulting material is malleable yet as strong as articular cartilage and selectively absorbs water when compared with n-dodecane oil. Moreover, the thermoset can be physically reused. After being crumpled, stretched, or coiled, the initial shape of the material is restored in response to heat or water. Furthermore, the material is amenable to chemical recycling in a bulk state via transesterification, and its components can be recovered on a molecular level after degradation under benign conditions, as was confirmed using a model compound.

Organocatalysis for depolymerisation

Chemical recycling of plastics offers a green method to deal with plastic waste. In this review, we highlight the recent advances made by applying organocatalysts to chemically degrade polymers as a promising tool to reach a circular plastic economy.

Polymers of Limonene Oxide and Carbon Dioxide: Polycarbonates of the Solar Economy

Limonene epoxide (1,2-limonene oxide) readily reacts with carbon dioxide inserted in a ring-opening copolymerization reaction and forms polycarbonates of exceptional chemical and physical properties. Both poly(limonene carbonate) and poly(limonene dicarbonate) can be synthesized using low-cost Zn or Al homogeneous catalysts. This study addresses selected relevant questions concerning the technical and economic feasibility of limonene and carbon dioxide polymers en route to the bioeconomy.

A Carbomethoxylated Polyvalerolactone from Malic Acid: Synthesis and Divergent Chemical Recycling

We report here the synthesis of a novel substituted polyvalerolactone from the renewable monomer, 4-carbomethoxyvalerolactone (CMVL, two steps from malic acid). The polymerization proceeds to high equilibrium monomer conversion to give the semicrystalline carbomethoxylated polyester with low dispersity. The material displays a glass transition temperature of -18 °C and two melting temperatures at 68 and 86 °C. This polymer can be chemically recycled by either of two independent pathways. The first (red) cleanly returns CMVL by a backbiting depolymerization from the hydroxy terminus; the second (blue) uses a base to cleave the polyester in a retro-oxa-Michael fashion. This affords a methacrylate-like monomer that we have polymerized radically to a new polymethacrylate analogue. This is a rare example of a polymer that has been shown to have two independent chemical recycling pathways leading to two different classes of monomers.