Core-shell Structure and Aggregation Number of Micelles Composed of Amphiphilic Block Copolymers and Amphiphilic Heterografted Polymer Brushes Determined by Small-Angle X-ray Scattering

Measurable structure factors of dense dispersions containing polydisperse optically inhomogeneous particles

Here, it is investigated how optical properties of single scatterers in interacting multi-particle systems influence measurable structure factors. Both particles with linear gradients of their scattering length density and core-shell structures evoke characteristic deviations between the weighted sum 〈S(Q)〉 of partial structure factors in a multi-component system and experimentally accessible measurable structure factors S M(Q). While 〈S(Q)〉 contains only the structural information of self-organizing systems, S M(Q) is additionally influenced by the optical properties of their constituents, resulting in features such as changing amplitudes, additional peaks in the low-wavevector region or splitting of higher-order maxima, which are not related to structural reasons. It is shown that these effects can be systematically categorized according to the qualitative behaviour of the form factor in the Guinier region, which enables assessing the suitability of experimentally obtained structure factors to genuinely represent the microstructure of complex systems free from any particular model assumption. Hence, a careful data analysis regarding size distribution and optical properties of single scatterers is mandatory to avoid a misinterpretation of measurable structure factors.

Supramolecular Association of a Block Copolymer via Strong Hydrogen Bonding to Form Self-Healable Ionogels

The drive to enhance the operational durability and reliability of stretchable and wearable electronic and electrochemical devices has led to the exploration of self-healing materials that can recover from both physical and functional failures. In the present study, we fabricated a self-healable solid polymer electrolyte, referred to as an ionogel, using reversible hydrogen bonding between the ureidopyrimidone units of a block copolymer (BCP) network swollen in an ionic liquid (IL). The BCP consisted of poly(styrene-b-(methyl acrylate-r-ureidopyrimidone methacrylate)) [poly(S-b-(MA-r-UPyMA)], with the IL-phobic polystyrene forming micellar cores that were interconnected via intercorona hydrogen bonding between the ureidopyrimidone units. By precisely regulating the molecular weight and the composition of the hydrogen-bondable motifs, the mechanical, electrical, and self-healing characteristics of the ionogel were systematically evaluated. The resulting ionogel samples exhibited suitable stretchability, ionic conductivity, and room-temperature self-healability due to reversible hydrogen bonding. To highlight the applicability of the self-healing ionogel as a high-capacitance gate insulator, an electrolyte-gated transistor (EGT) was fabricated using a poly(3-hexylthiophene-2,5-diyl) semiconductor, and the performance of the EGT was fully recovered from a complete cut without any external stimuli.

Evaporation-induced self-assembly of Janus pyramid molecules from fractal network to core-shell nanoclusters evidenced by small-angle X-ray scattering

Self-assembly of nanoclusters (NCs) is an effective synthetic method for preparing functionalized nanomaterials. However, the assembly process and mechanisms in solutions still remain ambiguous owing to the limited strategies to monitor intermediate assembled states. Herein, the self-assembly process of amphiphilic molecule 4POSS-DL-POM (consisting of four polyhedral oligomeric silsesquioxanes, a dendritic linker, and one polyoxometalate) by evaporation of acetone in a mixed acetone/n-decane solution is monitored by time-resolved synchrotron small-angle X-ray scattering (SAXS). Scattering data assessments, including Kratky analysis, pair distance distribution function, and model fitting, track the self-assembly process of 4POSS-DL-POM from a fractal network to compact NCs, then to core-shell NCs, and finally to superlattice structure. The calculated average aggregation number of a core-shell NC is 11 according to the parameters obtained from core-shell model fitting, in agreement with electron microscopy. The fundamental understanding of the self-assembly dynamics from heterocluster into NCs provides principles to control building block shape and guide target aggregation, which can further promote the design and construction of highly ordered cluster-assembled functional nanomaterials.

Amphiphilic Heterograft Copolymers Bearing Biocompatible/Biodegradable Grafts

The amphiphilic heterograft copolymers bearing biocompatible/biodegradable grafts [poly(2-methyl-2-oxazoline-co-2-pentyl-2-oxazoline)-g-poly(d-l-lactic acid)/poly(2-ethyl-2-oxazoline)] were synthesized successfully by the combination of cationic ring-opening polymerization and click chemistry via the ⟨"grafting to"⟩ approach. The challenge of this synthesis was to graft together hydrophobic and hydrophilic chains on a hydrophilic platform based on PMeOx. The efficiency of grafting depends on the chemical nature of the grafts and of the length of the macromolecular chains. The self-assembly of these polymers in aqueous media was investigated by DLS, cryo-TEM, and SANS. The results demonstrated that different morphologies were obtained from nanospheres and vesicles to filaments depending on the hydrophilic weight ratio in the heterograft copolymer varying from 0.38 until 0.84. As poly(2-ethyl-2-oxazoline) is known to be thermoresponsive, the influence of temperature rise on the nanoassembly stability was studied in water and in a physiological medium. SANS and DLS measurements during a temperature ramp allowed to show that nanoassemblies start to self-assemble in "raspberry like" primary structures at 50 °C, and these structures grow and get denser as the temperature is increased further. These amphiphilic heterograft copolymers may include hydrophobic drugs and should find important applications for biomedical applications which require stealth properties.

Versatile Click Linker Enabling Native Peptide Release from Nanocarriers upon Redox Trigger

Nanocarriers have shown their ability to extend the circulation time of drugs, enhance tumor uptake, and tune drug release. Therapeutic peptides are a class of drug compounds in which nanocarrier-mediated delivery can potentially improve their therapeutic index. To this end, there is an urgent need for orthogonal covalent linker chemistry facilitating the straightforward on-the-resin peptide generation, nanocarrier conjugation, as well as the triggered release of the peptide in its native state. Here, we present a copper-free clickable ring-strained alkyne linker conjugated to the N-terminus of oncolytic peptide LTX-315 via standard solid-phase peptide synthesis (SPPS). The linker contains (1) a recently developed seven-membered ring-strained alkyne, 3,3,6,6-tetramethylthiacycloheptyne sulfoximine (TMTHSI), (2) a disulfide bond, which is sensitive to the reducing cytosolic and tumor environment, and (3) a thiobenzyl carbamate spacer enabling release of the native peptide upon cleavage of the disulfide via 1,6-elimination. We demonstrate convenient "clicking" of the hydrophilic linker-peptide conjugate to preformed pegylated core-cross-linked polymeric micelles (CCPMs) of 50 nm containing azides in the hydrophobic core under aqueous conditions at room temperature resulting in a loading capacity of 8 mass % of peptide to polymer (56% loading efficiency). This entrapment of hydrophilic cargo into/to a cross-linked hydrophobic core is a new and counterintuitive approach for this class of nanocarriers. The release of LTX-315 from the CCPMs was investigated in vitro and rapid release upon exposure to glutathione (within minutes) followed by slower 1,6-elimination (within an hour) resulted in the formation of the native peptide. Finally, cytotoxicity of LTX CCPMs as well as uptake of sulfocyanine 5-loaded CCPMs was investigated by cell culture, demonstrating successful tumor cell killing at concentrations similar to that of the free peptide treatment.

Photodynamic Eradication of Pseudomonas aeruginosa with Ru-Photosensitizers Encapsulated in Enzyme Degradable Nanocarriers

The development of new approaches for the treatment of the increasingly antibiotic-resistant pathogen Pseudomonas aeruginosa was targeted by enhancing the effect of local antimicrobial photodynamic therapy (aPDT) using poly(ethylene glycol)-block-poly(lactic acid) (PEG114-block-PLAx) nanocarriers that were loaded with a ruthenium-based photosensitizer (PS). The action of tris(1,10-phenanthroline) ruthenium (II) bis(hexafluorophosphate) (RuPhen3) encapsulated in PEG114-block-PLAx micelles and vesicles was shown to result in an appreciable aPDT inactivation efficiency against planktonic Pseudomonas aeruginosa. In particular, the encapsulation of the PS, its release, and the efficiency of singlet oxygen (1O2) generation upon irradiation with blue light were studied spectroscopically. The antimicrobial effect was analyzed with two strains of Pseudomonas aeruginosa. Compared with PS-loaded micelles, formulations of the PS-loaded vesicles showed 10 times enhanced activity with a strong photodynamic inactivation effect of at least a 4.7 log reduction against both a Pseudomonas aeruginosa lab strain and a clinical isolate collected from the lung of a cystic fibrosis (CF) patient. This work lays the foundation for the targeted eradication of Pseudomonas aeruginosa using aPDT in various medical application areas.

Design of self-assembling anti-epileptic drug for long-acting drug delivery in vivo

Valproic acid (VPA) has been extensively used for the treatment of seizures in epilepsy. The recommended VPA concentration in the blood is in the range of 50-100 μg mL^-1 and its therapeutic efficiency is well recognized. Since its therapeutic range is relatively narrow, strict scheduling of daily self-medication is required to optimize therapeutic outcomes and avoid adverse effects. To facilitate patient convenience in long-term and chronic therapies, the development of a sustained drug delivery system for VPA is a promising strategy. In this study, an enzyme-metabolizable block copolymer possessing a valproate ester, poly(ethylene glycol)-b-poly(vinyl valproate), was synthesized. The synthesized block copolymers formed stable nanoparticles (denoted Nano^VPA) by self-assembly under physiological conditions and released VPA via enzymatic hydrolysis. Nano^VPA showed improved pharmacokinetics compared to sodium valproate in vivo, and therapeutic efficacy in a pentylenetetrazol (PTZ)-induced kindling mouse model after once-weekly administration.

Ion-Triggered Hydrogels Self-Assembled from Statistical Copolypeptides

Statistical copolypeptides comprising lysine and tyrosine with unprecedented ion-induced gelation behavior are reported. Copolypeptides are obtained by one-step N-carboxyanhydride (NCA) ring-opening polymerization. The gelation mechanism is studied by in situ SAXS analyses, in addition to optical spectroscopy and transmission electron microscopy (TEM). It is found that the gelation of these statistically polymerized polypeptides is due to the formation of stable intermolecular β-sheet secondary structures induced by the presence of salt ions as well as the aggregation of an α-helix between the copolypeptides. This behavior is unique to the statistical lysine/tyrosine copolypeptides and was not observed in any other amino acid combination or arrangement. Furthermore, the diffusion and mechanical properties of these hydrogels can be tuned through tailoring the polypeptide chain length and ion strength.

Coarse-Grained Molecular Dynamics Simulations of Paclitaxel-Loaded Polymeric Micelles

A continuous manufacturing technology based on coaxial turbulent jet in coflow was previously developed to produce paclitaxel-loaded polymeric micelles. Herein, coarse-grained molecular dynamics (CG-MD) simulations were implemented to better understand the effect of the material attributes (i.e., the drug-polymer ratio and the ethanol concentration) and process parameters (i.e., temperature) on the self-assembly process of polymeric micelles as well as to provide molecular details on micelle instability. An all-atom (AA) poly (ethylene glycol)-poly (lactic acid) (PEG-PLA) polymer model was developed as the reference for parameterizing a coarse-grained (CG) model, and the AA polymer model was further validated with experimental glass transition temperature (T_g). The model transferability was verified by comparing structural properties between the AA and CG models. The CG model was further validated with experimental data, including micelle particle size measurements and drug encapsulation efficiency. Furthermore, the encapsulation of paclitaxel into the polymeric micelles was included in the simulations, taking into consideration the interactions between the paclitaxel and the polymers. The results from various points of view demonstrated a strong dependence of the shape of the micelles on the drug encapsulation, with micelles transitioning from spherical to ellipsoidal structures with an increasing paclitaxel amount. Simulation data were also used to identify the critical aggregation number (i.e., the number of polymer and drug molecules required for transition from one shape to another). Improved micellar structural stability was found with a larger micellar size and less solvent accessibility. Lastly, an evaluation was performed on the micellar dissociation free energy using a steered molecular dynamics simulation over a range of temperatures and ethanol concentrations. These simulations revealed that at higher ethanol and temperature conditions, micelles become destabilized, resulting in greater paclitaxel release. The increased drug release was determined to originate from the solvation of the hydrophobic core, which promoted micellar swelling and an associated reduction in hydrophobic interactions, leading to a loosely packed micellar structure.

Thermo/pH dual-responsive micelles based on the host-guest interaction between benzimidazole-terminated graft copolymer and β-cyclodextrin-functionalized star block copolymer for smart drug delivery

Novel temperature and pH dual-sensitive amphiphilic micelles were fabricated exploiting the host-guest interaction between benzimidazole-terminated PHEMA-g-(PCL-BM) and β-CD-star-PMAA-b-PNIPAM. The fabricated graft copolymer had a brush-like structure with star side chains. The micelles were utilized as dual-responsive nanocarriers and showed the LCST between 40 and 41 °C. The acidic pH promoted the dissociation of the PHEMA-g-(PCL-BM: β-CD-star-PMAA-b-PNIPAM) micelles. DOX.HCl was loaded into the core of the micelles during self-assembly in an aqueous solution with a high encapsulation efficacy (97.3%). The average size of the amphiphilic micelles was about 80 nm, suitable size for the enhanced permeability and retention effect in tumor vasculature. In an aqueous environment, these micelles exhibited very good self-assembly ability, low CMC value, rapid pH- and thermo-responsiveness, optimal drug loading capacity, and effective release of the drug. The biocompatibility was confirmed by the viability assessment of human breast cancer cell line (MCF-7) through methyl tetrazolium assay. DOX-loaded micelles displayed excellent anti-cancer activity performance in comparison with free DOX.

Interrogating the relationship between the microstructure of amphiphilic poly(ethylene glycol-b-caprolactone) copolymers and their colloidal assemblies using non-interfering techniques

Understanding the microstructural parameters of amphiphilic copolymers that control the formation and structure of aggregated colloids (e.g., micelles) is essential for the rational design of hierarchically structured systems for applications in nanomedicine, personal care and food formulations. Although many analytical techniques have been employed to study such systems, in this investigation we adopted an integrated approach using non-interfering techniques - diffusion nuclear magnetic resonance (NMR) spectroscopy, dynamic light scattering (DLS) and synchrotron small-angle X-ray scattering (SAXS) - to probe the relationship between the microstructure of poly(ethylene glycol-b-caprolactone) (PEG-b-PCL) copolymers [e.g., block molecular weight (MW) and the mass fraction of PCL (f_PCL)] and the structure of their aggregates. Systematic trends in the self-assembly behaviour were determined using a large family of well-defined block copolymers with variable PEG and PCL block lengths (number-average molecular weights (M_n) between 2 and 10 and 0.5-15 kDa, respectively) and narrow dispersity (Ð < 1.12). For all of the copolymers, a clear transition in the aggregate structure was observed when the hydrophobic f_PCL was increased at a constant PEG block M_n, although the nature of this transition is also dependent on the PEG block M_n. Copolymers with low M_n PEG blocks (2 kDa) were observed to transition from unimers and loosely associated unimers to metastable aggregates and finally, to cylindrical micelles as the f_PCL was increased. In comparison, copolymers with PEG block M_n of between 5 and 10 kDa transitioned from heterogenous metastable aggregates to cylindrical micelles and finally, well-defined ellipsoidal micelles (of decreasing aspect ratios) as the f_PCL was increased. In all cases, the diffusion NMR spectroscopy, DLS and synchrotron SAXS results provided complementary information and the grounds for a phase diagram relating copolymer microstructure to aggregation behaviour and structure. Importantly, the absence of commonly depicted spherical micelles has implications for applications where properties may be governed by shape, such as, cellular uptake of nanomedicine formulations.

Self-Assembly of Poly(Janus particle)s into Unimolecular and Oligomeric Spherical Micelles

Using shape-persistent Janus particles to construct poly(Janus particle)s and studying their self-assembly behaviors are of great interest, but remain largely unexplored. In this work, we reported a type of amphiphiles constructed by the ring-opening metathesis polymerization of nonspherical molecular Janus particles (APOSS-BPOSS), called poly(Janus particle)s (poly(APOSS-BPOSS)_n, n = 12, 17, 22, and 35, and M_n = 35-100 kg/mol). Unlike traditional bottlebrush polymers consisting of flexible side chains, these poly(Janus particles) consist of rigid hydrophilic and hydrophobic polyhedral oligomeric silsesquioxane (POSS) cages as side chains. Interestingly, instead of maintaining an expected extended chain conformation, they could also collapse and then self-assemble to form unconventional unimolecular or oligomeric spherical micelles in solutions with a feature size smaller than 7 nm. More importantly, unlike traditional amphiphilic polymer brushes that could form unimolecular micelles at a relatively high degree of polymerization by self-assembly, these poly(Janus particles)s could accomplish self-assembly at a quite low degree of polymerization because of their unique chemical structure and molecular topology. The formation of unimolecular and oligomeric micelles was also further confirmed by dissipative particle dynamics simulations. This study of introducing the POSS-based poly(Janus particle)s as a class of shape amphiphiles will provide a model system for generating unimolecular and oligomeric micellar nanostructures through solution self-assembly.

In situ conversion from crew-cut to hairy micelles by surface-initiated polymerization

Whether spherical micelles of block copolymers have short or long coronas is intrinsically determined by the molecular weight of the corona-forming block with respect to that of the core block before the micelles are assembled. Because of the inherent conditions of packing copolymer chains into a micelle, the core diameter is altered when we assemble a micelle from a block copolymer having a long corona block, compared to that having a short corona block with the same length of the core block. However, micelles with the same core diameter but having various corona lengths can be guaranteed when the corona is extended upon surface-initiated polymerization on the micelles. Herein, we demonstrated in situ conversion from crew-cut to hairy micelles by selectively extending a corona block while maintaining the spherical shape of block copolymer micelles. We first synthesized block copolymers having a chain transfer agent (CTA) positioned at the end of the corona block and then assembled them into a crew-cut micelle. Employing this micelle as an assembly of macro-CTAs, we conducted surface-initiated polymerization on the micelle by photo-induced energy/electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Since PET-RAFT enables the polymerization at room temperature, the corona block was selectively extended with preservation of the core diameter, thereby converting a crew-cut micelle to a hairy one. In addition, by applying the same polymerization protocol to a worm-like micelle, we could selectively extend the coronas, leading to the formation of a worm-like micelle with a long corona. If such copolymer chains were assembled into a micelle, we would obtain a spherical micelle instead of a worm-like micelle having a hairy corona, which is difficult to assess because of the inherent packing problem.

Polymeric micelles in drug delivery: An insight of the techniques for their characterization and assessment in biorelevant conditions

Polymeric micelles, i.e. aggregation colloids formed in solution by self-assembling of amphiphilic polymers, represent an innovative tool to overcome several issues related to drug administration, from the low water-solubility to the poor drug permeability across biological barriers. With respect to other nanocarriers, polymeric micelles generally display smaller size, easier preparation and sterilization processes, and good solubilization properties, unfortunately associated with a lower stability in biological fluids and a more complicated characterization. Particularly challenging is the study of their interaction with the biological environment, essential to predict the real in vivo behavior after administration. In this review, after a general presentation on micelles features and properties, different characterization techniques are discussed, from the ones used for the determination of micelles basic characteristics (critical micellar concentration, size, surface charge, morphology) to the more complex approaches used to figure out micelles kinetic stability, drug release and behavior in the presence of biological substrates (fluids, cells and tissues). The techniques presented (such as dynamic light scattering, AFM, cryo-TEM, X-ray scattering, FRET, symmetrical flow field-flow fractionation (AF4) and density ultracentrifugation), each one with their own advantages and limitations, can be combined to achieve a deeper comprehension of polymeric micelles in vivo behavior. The set-up and validation of adequate methods for micelles description represent the essential starting point for their development and clinical success.

Amphiphilic Double-Brush Copolymers with a Polyurethane Backbone: A Bespoke Macromolecular Emulsifier for Ionic Liquid-in-Oil Emulsion

The study on ionic liquid (IL)-based emulsions is very interesting due to the "green" quality and potential wide applications of ILs, whereas the emulsifiers for the formation of IL-based emulsions are extremely limited and mainly centered on low molecular weight surfactants. In this work, synthesis of amphiphilic double-brush copolymers (DBCs) and their application as bespoke macromolecular emulsifiers for the formation of IL-containing non-aqueous emulsions are described. DBCs consisted of a polyurethane (PU) backbone and poly(N,N-dimethyl acrylamide) (PDMA) and poly(methyl methacrylate) (PMMA) chains that were grafted simultaneously at the same reactive site along the PU backbone (PU-g-PDMA/PMMA), which were synthesized through the combination of polyaddition and the reversible-deactivation radical polymerization reactions. Highly stable [Bmim][PF₆]-in-benzene emulsions could be gained by adopting PU-g-PDMA/PMMA DBCs as macromolecular emulsifiers at a low content, such as 0.025 wt %. On the basis of the stability and the size of emulsion droplets, PU-g-PDMA/PMMA DBCs exhibited much better emulsifying performances than their analogues, including PU-g-PDMA, PU-g-PMMA, and PDMA-b-PMMA copolymers. Such excellent emulsifying performances of PU-g-PDMA/PMMA DBCs were due to high interfacial activities. PU-g-PDMA/PMMA DBCs exhibited higher capabilities in lowering the interfacial tension of the [Bmim][PF₆]-benzene interface than their analogues. A large energy barrier to desorption of adsorbed PU-g-PDMA/PMMA DBCs from the interface contributed to high stability of the [Bmim][PF₆]-in-benzene emulsion.

Poly(Ethylene Glycol)-b-Poly(D,L-Lactide) Nanoparticles as Potential Carriers for Anticancer Drug Oxaliplatin

Nanoparticles based on biocompatible methoxy poly(ethylene glycol)-b-poly(D,L-lactide) (mPEG₁₁₃-b-P(D,L)LA_n) copolymers as potential vehicles for the anticancer agent oxaliplatin were prepared by a nanoprecipitation technique. It was demonstrated that an increase in the hydrophobic PLA block length from 62 to 173 monomer units leads to an increase of the size of nanoparticles from 32 to 56 nm. Small-angle X-ray scattering studies confirmed the “core-corona” structure of mPEG₁₁₃-b-P(D,L)LA_n nanoparticles and oxaliplatin loading. It was suggested that hydrophilic oxaliplatin is adsorbed on the core-corona interface of the nanoparticles during the nanoprecipitation process. The oxaliplatin loading content decreased from 3.8 to 1.5% wt./wt. (with initial loading of 5% wt./wt.) with increasing PLA block length. Thus, the highest loading content of the anticancer drug oxaliplatin with its encapsulation efficiency of 76% in mPEG₁₁₃-b-P(D,L)LA_n nanoparticles can be achieved for block copolymer with short hydrophobic block.

Micellar Carriers Based on Amphiphilic PEG/PCL Graft Copolymers for Delivery of Active Substances

Amphiphilic copolymers of alkyne functionalized 2-hydroxyethyl methacrylate (AlHEMA) and poly(ethylene glycol) methyl ether methacrylate (MPEGMA) with graft or V-shaped graft topologies were synthesized. The functionalization of poly(ε-caprolactone) (PCL) with azide group enabled attachment to P(AlHEMA-co-MPEGMA) copolymers via a "click" alkyne-azide reaction. The introduction of PCL as a second side chain type in addition to PEG resulted in heterografted copolymers with modified properties such as biodegradability. "Click" reactions were carried out with efficiencies between 17-70% or 32-50% (for lower molecular weight PCL, 4000 g/mol, or higher molecular weight PCL, 9000 g/mol, respectively) depending on the PEG grafting density. The graft copolymers were self-assembled into micellar superstructures with the ability to encapsulate active substances, such as vitamin C (VitC), arbutin (ARB) or 4-n-butylresorcinol (4nBRE). Drug loading contents (DLC) were obtained in the range of 5-55% (VitC), 39-91% (ARB) and 42-98% (4nBRE). In vitro studies carried out in a phosphate buffer saline (PBS) solution (at pH 7.4 or 5.5) gave the maximum release levels of active substances after 10-240 min depending on the polymer system. Permeation tests in Franz chambers indicated that the bioactive substances after release by micellar systems penetrated through the artificial skin membrane in small amounts, and a majority of the bioactive substances remained inside the membrane, which is satisfactory for most cosmetic applications.

Structural Characterization of Biomaterials by Means of Small Angle X-rays and Neutron Scattering (SAXS and SANS), and Light Scattering Experiments

Scattering techniques represent non-invasive experimental approaches and powerful tools for the investigation of structure and conformation of biomaterial systems in a wide range of distances, ranging from the nanometric to micrometric scale. More specifically, small-angle X-rays and neutron scattering and light scattering techniques represent well-established experimental techniques for the investigation of the structural properties of biomaterials and, through the use of suitable models, they allow to study and mimic various biological systems under physiologically relevant conditions. They provide the ensemble averaged (and then statistically relevant) information under in situ and operando conditions, and represent useful tools complementary to the various traditional imaging techniques that, on the contrary, reveal more local structural information. Together with the classical structure characterization approaches, we introduce the basic concepts that make it possible to examine inter-particles interactions, and to study the growth processes and conformational changes in nanostructures, which have become increasingly relevant for an accurate understanding and prediction of various mechanisms in the fields of biotechnology and nanotechnology. The upgrade of the various scattering techniques, such as the contrast variation or time resolved experiments, offers unique opportunities to study the nano- and mesoscopic structure and their evolution with time in a way not accessible by other techniques. For this reason, highly performant instruments are installed at most of the facility research centers worldwide. These new insights allow to largely ameliorate the control of (chemico-physical and biologic) processes of complex (bio-)materials at the molecular length scales, and open a full potential for the development and engineering of a variety of nano-scale biomaterials for advanced applications.

Kinetically-arrested single-polymer nanostructures from amphiphilic mikto-grafted bottlebrushes in solution: a simulation study

Solution self-assembly of molecular bottlebrushes offers a rich platform to create complex functional organic nanostructures. Recently, it has become evident that kinetics, not just thermodynamics, plays an important role in defining the self-assembled structures that can be formed. In this work, we present results from extensive molecular dynamics simulations that explore the self-assembly behavior of mikto-grafted bottlebrushes when the solvent quality for one of the side blocks is changed by a rapid quench. We have performed a systematic study of the effect of different structural parameters and the degree of incompatibility between side chains on the final self-assembled nanostructures in the low concentration limit. We found that kinetically-trapped complex nanostructures are prevalent as the number of macromonomers increases. We performed a quantitative analysis of the self-assembled morphologies by computing the radius of gyration tensor and relative shape anisotropy as the different relevant parameters were varied. Our results are summarized in terms of non-equilibrium morphology diagrams.

Magnetic Nanoparticles in Cancer Therapy and Diagnosis

There is urgency for the development of nanomaterials that can meet emerging biomedical needs. Magnetic nanoparticles (MNPs) offer high magnetic moments and surface-area-to-volume ratios that make them attractive for hyperthermia therapy of cancer and targeted drug delivery. Additionally, they can function as contrast agents for magnetic resonance imaging (MRI) and can improve the sensitivity of biosensors and diagnostic tools. Recent advancements in nanotechnology have resulted in the realization of the next generation of MNPs suitable for these and other biomedical applications. This review discusses methods utilized for the fabrication and engineering of MNPs. Recent progress in the use of MNPs for hyperthermia therapy, controlling drug release, MRI, and biosensing is also critically reviewed. Finally, challenges in the field and potential opportunities for the use of MNPs toward improving their properties are discussed.

Molecular mechanism underlying the effects of temperature and pH on the size and surface charge of octenylsuccinated oat β-glucan aggregates

Environmental temperature and pH induced significant changes in the size and surface charge (ζ) of octenylsuccinated oat β-glucan aggregates. The underlying mechanisms were explored by using ¹H-NMR, fluorescence spectra, thermodynamic analysis, and SAXS. At pH 6.5, the size decreased with temperature while ζ continuously increased. With increasing pH at 293 K, parabolic and U-shaped trends were observed in the size and ζ, peaking at pH 8.5 and 6.5, respectively. At any tested pH, the size decreased with temperature. Overall, ζ significantly increased with temperature at each pH. As temperature increased, the compactness of hydrophobic-domains increased while the compactness of hydrophilic-domains decreased. In an acidic environment, both the compactness increased with decreasing pH, but in an alkaline environment, they decreased with pH. The compactness changes were co-driven by enthalpy and entropy and corresponded to changes in the hydrophobic interactions in hydrophobic-domains, hydrogen bonds in hydrophilic-domains and electrostatic repulsions among octenylsuccinate molecules.

Inhibiting tumour metastasis by DQA modified paclitaxel plus ligustrazine micelles in treatment of non-small-cell lung cancer

Lung cancer is a kind of malignant tumour characterized as uncontrolled cell growth in lung. These malignant cell growth can spread beyond the lung by process of metastasis into other tissues or parts of the body. In this study, we developed dequalinium (DQA) modified paclitaxel plus ligustrazine micelles to destroy vasculogenic mimicry (VM) channels and inhibit tumour metastasis. In vitro assays showed that the targeting micelles with centralized particle size distribution showed not only vigoroso cytotoxicity on A549 cells but also strong inhibition on VM channels and tumour metastasis. Mechanism studies indicated that the DQA modified paclitaxel plus ligustrazine micelles could down-regulate the expressions of VEGF, MMP2, TGF-β1 and E-cadherin in A549 cells. In vivo assays indicated that the targeting drug-loaded micelles could enhance the accumulation of chemotherapeutic drugs at tumour sites and exhibit strong tumour inhibitory activity with negligible toxicity. Hence, the DQA modified paclitaxel plus ligustrazine micelles developed in this study may provide a potential strategy for treatment of NSCLC.

Cremophor EL Nano-Emulsion Monomerizes Chlorophyll a in Water Medium

In this paper, the application of a non-ionic detergent Cremophor EL for monomerization of chlorophyll a in an aqueous medium is studied. The spectrophotometric properties of chlorophyll a encapsulated into the Cremophor EL nano-emulsion system were characterized by electronic absorption, steady-state and time-resolved fluorescence as well as circular dichroism spectroscopy. The results have shown that chlorophyll a dissolves more efficiently in the aqueous medium containing low-level Cremophor (5 wt%) than at an ethanolic solution even in the concentration of 10⁻⁴ M. The molecular organization of the chlorophyll a in the Cremophor EL nano-micelles was also investigated by means of Raman spectroscopy. The spectral changes in the frequency of the C=O stretching group were used to distinguish the aggregation state of chlorophyll. It was revealed that chlorophyll a exists dominantly in the monomeric form in the Cremophor EL aqueous solution. The promising aspect of the use of Cremophor EL nano-emulsion as a delivery system is to maintain stable chlorophyll monomer in an aqueous medium. It would open the potential for a new, practical application of chlorophyll a in medicine, as a dietary supplement or studies on molecular organization of chlorophyll a in the well-defined artificial system.

Optimal aggregation number of reverse micelles in supercritical carbon dioxide: a theoretical perspective

The aggregation number is one of the most fundamental and important structural parameters for the micelle or reverse micelle (RM) system. In this work, a simple, reliable method for the determination of the aggregation number of RMs in supercritical CO2 (scCO2) was presented through a molecular dynamics simulation. The process of pulling surfactants out of the RMs one by one was performed to calculate the aggregation number. The free energies of RMs with different numbers of surfactants were calculated through this process. We found an RM with the lowest free energy, which was considered to have the optimal number of surfactants. Therefore, the optimal aggregation number of RMs was acquired. In order to explain the existence of an optimal aggregation number, detailed analyses of surfactant accumulation were conducted by combining molecular dynamics with quantum chemistry methods. The results indicated that in the RMs with the lowest free energy, the head-group and tail-terminal of the surfactants accumulated on an equipotential surface. In this case, the surfactant film could effectively separate water and CO2; thus, the lowest free energy was expected. This method determined the aggregation number of RMs by theoretical calculations that did not depend on experimental measurements. This presented approach facilitates the evaluation of the characteristics of RMs in scCO2 and can be further applied in the RM system of organic solvents or even in the micellar system.

In Situ Measurements of Polymer Micellization Kinetics with Millisecond Temporal Resolution

Utilizing synchrotron small-angle X-ray scattering (SAXS) integrated with a microfluidic device, micellization kinetics of a diblock co-polymer, poly(ethylene glycol)-b-poly(caprolactone) (PEG-b-PCL) was measured in situ with millisecond temporal and micrometer spatial resolution. The evolutionary regimes of polymer micellization - nucleation, fusion, and insertion were directly observed. The five-inlet microfluidic device provided steady continuous mixing of the polymer solution and the antisolvent. Solvent replacement was mainly dominated by lateral diffusion across the hydrodynamically focused central layer, whose thickness could be precisely designed and manipulated from mass balance of the partitioning streams. Knowing the micellization kinetics of the polymers is essential for design and optimization of self-assembled polymeric nanostructures. The technique of integrating SAXS with microfluidic devices can be translatable to other systems for a breadth of applications.

Micelle Structure Details and Stabilities of Cyclic Block Copolymer Amphiphile and Its Linear Analogues

In this study, we investigate structures and stabilities of the micelles of a cyclic amphiphile (c-PBA-b-PEO) composed of poly(n-butyl acrylate) (PBA) and poly(ethylene oxide) (PEO) blocks and its linear diblock and triblock analogues (l-PBA-b-PEO and l-PBA-b-PEO-b-PBA) by using synchrotron X-ray scattering and quantitative data analysis. The comprehensive scattering analysis gives details and insights to the micellar architecture through structural parameters. Furthermore, this analysis provides direct clues for structural stabilities in micelles, which can be used as a good guideline to design highly stable micelles. Interestingly, in water, all topological polymers are found to form ellipsoidal micelles rather than spherical micelles; more interestingly, the cyclic polymer and its linear triblock analog make oblate-ellipsoidal micelles while the linear diblock analog makes a prolate-ellipsoidal micelle. The analysis results collectively inform that the cyclic topology enables more compact micelle formation as well as provides a positive impact on the micellar structural integrity.

Temperature and solvent isotope dependent hierarchical self-assembly of a heterografted block copolymer

A heterografted block copolymer with doubly thermoresponsive grafts is designed to address the challenge in hierarchical self-assembly. Upon heating, solvent isotope dependent morphology transitions from spheres to nanobowls, vesicles, disks, nanosheets, nanoribbons and hyperbranched micelles can be achieved. The strategy provides a general platform to prepare diverse thermoreversible nano-objects.

Design and Fabrication of Streptavidin-Functionalized, Fluorescently Labeled Polymeric Nanocarriers

Targeted drug delivery has great potential for improving therapeutic outcomes for many diseases. Polymeric nanocarriers can improve the targeted delivery of insoluble and toxic drugs but, to achieve this, it is important to tailor the particle properties. In this study, nanoparticles comprised of poly(ethylene oxide)- b-poly(d,l-lactic acid) (PEO- b-PDLLA) were made by flash nanoprecipitation while varying the compositions of the additives poly(l-lactic acid) (PLLA), a fluorophore 6,13-bis(triisopropylsylylethynyl) (TIPS) pentacene, and poly(acrylic acid)- b-poly(d,l-lactic acid) (PAA- b-PDLLA) to characterize their effects on size, ζ potential, fluorescence, and surface functionalization. The particle size was readily increased by addition of PLLA homopolymer up to ∼40 wt % without significant change to the ζ potential. The maximum nanoparticle fluorescence was at 0.5 wt % TIPS based on the PDLLA core and exhibited quenching that could be described by Förster resonant energy transfer. The cores of the particles were coupled with streptavidin through 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide coupling chemistry. Even without the added carboxylate groups from the PAA, the base PEO- b-PDLLA nanoparticles were conjugated with streptavidin at comparable levels while retaining the functionality of streptavidin for further biotinylated ligand binding.

Design of hybrid molecular brushes with reversible surface adaptability on exposure to specific solvents

Hybrid molecular brushes (HMBs) are macromolecules made of a linear backbone and polymeric side chains that differ in their chemical nature. The authors developed a new method of synthesis of HMB with chitosan (CHI) backbone. In the first step, chitosan-graft-polylactide (CHI-g-PLA) was synthesized by interfacial ring opening polymerization of lactide initiated from CHI. CHI-g-PLA is characterized for its molecular weight and structure. In the second step, polyvinylpyrrolidone (PNVP) or polyacrylamide (PAAm) is grafted by radical polymerization from the CHI in CHI-g-PLA to form CHI-g-PLA-g-PNVP and CHI-g-PLA-g-PAAm. This results in the formation of HMB, with hydrophobic PLA and hydrophilic PNVP or PAAm side chains grafted to CHI. The chemical structure and thermal behavior of the HMBs are characterized. The morphology of CHI-g-PLA as well as the HMBs is determined using atomic force microscopy (AFM). Both the HMBs tethered to separate surfaces exhibit reversible switching between the hydrophilic and hydrophobic polymers on exposure to specific solvents. This is studied by AFM and water contact angle measurements. Hence, the authors developed a method for synthesis of HMB that can be applied for surface modification.