Nanorod-Surfactant Assemblies and Their Interfacial Behavior at Liquid-Liquid Interfaces

Electrostatic Interaction-Driven Fabrication of Large-Area, Freestanding Nanoparticle Surfactant Membranes with Controllable Elastic Properties

Nanoparticle surfactants assembled at water-oil interfaces can significantly lower the interfacial tension and can be used to stabilize liquids. Understanding and actively tuning the mechanical properties of the generated membranes, which comprise the nanoparticle surfactants, are of significant fundamental interest for the interfacial behavior of nanoparticles and of interest for water purification, drug encapsulation, enhanced oil recovery, and innovative energy transduction applications. Here, we present electrostatic interaction-driven fabrication of freestanding and close-packed SiO2 surfactant membranes with diameters up to 0.10 mm. The membranes of 20-30 nm in thickness were spanned over holes with a diameter of 2 μm, exhibiting a Young's modulus ranging from 1.5 to 5.9 GPa. The controllable elastic properties of the fabricated nanoparticle surfactant membranes are found to be dictated by the strength of interactions between nanoparticles and ligands, between ligands and ligands, and between the nanoparticle surfactants. The results present an efficient approach for fabricating and developing nanoparticle surfactant-based large-area, freestanding, and ultrathin membranes with finely tunable mechanical properties on a large scale.

Role of Density and Conformational Composition in the Surface-to-Bulk Molecular Dosing of Photosensitive Surfactant Monolayers

Poorly water-soluble photosensitive monolayers might enable very precise control of the rate and number of desorbing molecules by controlling both the monolayer density and conformational composition. In this perspective, we systematically characterized the interfacial behavior of Langmuir monolayers consisting of a poorly water-soluble azobenzene-containing surfactant as a function of its trans/cis ratio. Precise control of the conformational ratio was achieved by controlling the UV irradiation time, allowing researchers to investigate compositions spanning from 100% trans to 90% cis. Our results demonstrate that in 100% trans monolayers, molecules do not desorb with compression until a threshold area is reached. Instead, the number of molecules desorbing in mixed trans-cis monolayers can be modulated by controlling both the composition and the compression rate. Additionally, the desorption rate at constant density is also strongly composition-dependent, and it accounts for two different regimes with two different characteristic times. We will show that trans molecules mostly desorb according to the slow regime while cis molecules conform to the fast one, but the two conformers mutually influence each other.

Effects of Ferric Ions on Cellulose Nanocrystalline-Based Chiral Nematic Film and Its Applications

Chiral nematic materials have been attracting attention in fields of advanced functional applications due to their unique iridescent colors and tunable helical structure. A precisely decreased pitch is of importance for construction and applications of chiral nematic materials; however, it remains a huge challenge. Herein, cellulose nanocrystal (CNC) is selected as a constructed matrix for chiral nematic films, and ferric chloride (FeCl3) is used as a modification agent. We investigate the effects of the ferric ion loads on the helical structure and optical characteristics of iridescent film. Subsequently, the influence of ferric ions on the assembly process of CNC liquid crystal and the regulation of the structure color of self-assembled monolayers are discussed. Therefore, the CNC/FeCl3 chiral nematic films showed a blueshifted structural color from orange to blue, which highlights a simple route to achieve the regulation of decreased pitch. Further, we have applied this CNC/FeCl3 chiral nematic film for benzene gas detection. The sensing performance shows that the CNC/FeCl3 chiral nematic film reacts to benzene gas, which can be merged into the nematic layer of the CNC and trigger the iron ions chelated on the CNC, consequently arousing the redshift of the reflected wavelength and the effective colorimetric transition. This CNC/FeCl3 chiral nematic film is anticipated to boost a new gas sensing mechanism for faster and more effective in-situ qualitative investigations.

Apparent Failures in Interpretation of Interfacial Characterization When Formulating Emulsions Stabilized by Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) are sustainable particles that are effective at stabilizing emulsions by adsorbing at droplet interfaces and providing a steric barrier to coalescence. However, CNCs have surface charges that reduce the coverage of the emulsion droplets due to the electrostatic repulsion between CNCs. In such cases, adding salt is a typical (and straightforward) way to adjust the formulation so that the charges are screened, allowing increased coverage of the droplets. At the outset of this work, we hypothesized that characterization of the interfacial tension and interfacial shear rheology of the oil-water interface would be correlated to interfacial coverage and therefore predictive of the optimal salt concentration for emulsion stability. Included in the methods section as a useful reference to others is the presentation of a detailed derivation for the equations needed to compute interfacial shear moduli in a custom, double-gap geometry. In contrast to our hypothesis, we found that interfacial tension did not correlate well with emulsion stability and that the native surface-active compounds in corn oil overwhelmed any influence of the CNCs on the interfacial tension. Additionally, we found that interfacial shear rheology (which can be painstakingly difficult to measure) was not a useful tool for formulating these emulsions. This is because at commonly used concentrations of CNCs, the bulk rheology is increased to a much greater degree than that of the interface, making the details of the interfacial rheology unimportant. Finally, we found that at concentrations of CNCs that are typical in industrial processes, characterizing the bulk viscoelastic properties of the aqueous suspending phase without added oil (a relatively simple measurement) is sufficient to predict the influence of NaCl concentration on charge screening between the CNCs and, by extension, increased surface coverage of droplets for greater emulsion stability.

Relaxing Wrinkles in Jammed Interfacial Assemblies

Dynamic covalent bonding has emerged as a mean by which stresses in a network can be relaxed. Here, the strength of the bonding of ligands to nanoparticles at the interface between two immiscible liquids affect the same results in jammed assemblies of nanoparticle surfactants. Beyond a critical degree of overcrowding induced by the compression of jammed interfacial assemblies, the bonding of ligands to nanoparticles (NPs) can be broken, resulting in a desorption of the NPs from the interface. This reduces the areal density of nanoparticle surfactants at the interface, allowing the assemblies to relax, not to a fluid state but rather another jammed state. The relaxation of the wrinkles caused by the compression reflects the tendency of these assemblies to eliminate areas of high curvature, favoring a more planar geometry. This enabled the generation of giant vesicular and multivesicular structures from these assemblies.

Ionic Strength-Dependent Assembly of Polyelectrolyte-Nanoparticle Membranes via Interfacial Complexation at a Water-Water Interface

Complexation between oppositely charged nanoparticles (NPs) and polyelectrolytes (PEs) is a scalable approach to assemble functional, stimuli-responsive membranes. Complexation at interfaces of aqueous two-phase systems (ATPSs) has emerged as a powerful method to assemble these functional structures. Membranes formed at these interfaces can grow continuously to thicknesses approaching several millimeters and display a high degree of tunability via modification of solution properties such as ionic strength. To identify the membrane assembly mechanism, we study interfacial assembly in a prototypical dextran/PEG ATPS, in which silica (SiO₂) NPs suspended in the PEG phase undergo interfacial complexation with poly(diallyldimethylammonium chloride) (PDADMAC) supplied in the dextran phase. Using a microfluidic device that facilitates sequential insertion of fluorescent and nonfluorescent PDADMAC, we observe a transition in the membrane growth mechanism with ionic strength. In the absence of added salt ([NaCl] = 0 mM) PDADMAC chains permeate through the existing membrane to complex with NPs on the PEG side of the membrane, leading to the formation of well-stratified structures. At elevated ionic strength ([NaCl] = 500 mM), this permeation mechanism is lost. Rather, the complexing species incorporate uniformly across the membrane. We attribute this transition to a rapid exchange of PE-counterion, NP-counterion, and PE/NP binding sites facilitated by an increase in extrinsically compensated charged groups on the NPs and PEs at high salinity. These PDADMAC/SiO₂ NP membranes have tremendous potential for the formation of functional membranes, offering control over the internal structure and serving as an ideal system for the generation of targeted release systems.

Langmuir-Blodgett Deposition of Cellulose Nanocrystal Surfactants into Ordered Monolayers

The cellulose nanocrystals (CNCs) are shown to interact with amine-functionalized polyhedral oligomeric silsesquioxane (POSS-NH₂) strongly at the water/oil interface, forming the CNC-POSS assemblies, that is, CNC surfactants that decrease the interfacial tension of the water/chloroform greatly. When bringing the CNC aqueous solution and POSS chloroform solution into a Langmuir trough, they form a monolayer of the CNC surfactants. Upon applying a continuous compression, a distinct transition appears in the surface pressure-area curves, and during this transition, the packing of the CNC surfactants in the produced monolayers transits from network-like patterns to ordered alignment.

Studies into interactions and interfacial characteristics between cellulose nanocrystals and bovine serum albumin

This study investigates the interactions between cellulose nanocrystals (CNCs) and bovine serum albumin (BSA) under different pH conditions. A multiscale technique was employed to characterize the CNCs and BSA at pH 7 and pH 3. ζ-Potential measurement and UV-vis spectroscopy demonstrated strong interactions between CNCs and BSA at pH 3, whereat they have opposite charges. Interfacial tensiometry showed a deficiency in the surface activity of the CNCs and indicated that BSA dominated the interface behavior in their complex. Quartz crystal microbalance with dissipation revealed that the sequential adsorption of BSA and CNCs produced viscoelastic bilayers at pH 3, and the mass adsorbed was ∼ 28 times that adsorbed at pH 7. Molecular dynamics simulations indicated that the key interactions between the two materials were produced between the hydrophobic CNC surface and the BSA domain IIA region. These results provide interesting insights into the design of complex food emulsions and fluid interfaces.

The Buckling Spectra of Nanoparticle Surfactant Assemblies

Fine control over the mechanical properties of thin sheets underpins transcytosis, cell shape, and morphogenesis. Applying these principles to artificial, liquid-based systems has led to reconfigurable materials for soft robotics, actuation, and chemical synthesis. However, progress is limited by a lack of synthetic two-dimensional membranes that exhibit tunable mechanical properties over a comparable range to that seen in nature. Here, we show that the bending modulus, B, of thin assemblies of nanoparticle surfactants (NPSs) at the oil-water interface can be varied continuously from sub-k_BT to 10⁶k_BT, by varying the ligands and particles that comprise the NPS. We find extensive departure from continuum behavior, including enormous mechanical anisotropy and a power law relation between B and the buckling spectrum width. Our findings provide a platform for shape-changing liquid devices and motivate new theories for the description of thin-film wrinkling.

Dynamic emulsion droplets enabled by interfacial assembly of azobenzene-functionalized nanoparticles under light and magnetic field

HYPOTHESIS

The ability to control the assembly of micro/nanosized particles at liquid-liquid interface with external inputs promises new opportunities in nanofabrication and biomedicines. This work aims to demonstrate a way to control of dynamic assembly of nanoparticles at liquid-liquid interface by light and magnetic field, which consequently enables the formation of dynamic emulsion droplets.

EXPERIMENTS

Magnetic Fe₃O₄ nanoparticles functionalized with azobenzene moieties (Fe₃O₄@AZO) were synthesized and were dispersed in toluene/(N,N-dimethylformamide, DMF) binary solvent. After irradiation with UV or visible light, the assembly behavior of these Fe₃O₄ nanoparticles were evaluated by electron microscopy and fluorescent microscopy.

FINDINGS

Under UV light, Fe₃O₄@AZO nanoparticles were self-assembled due to the increase of dipolar interaction from the photoisomerization of azobenzene and polar molecules, DMF, were harvested from a binary solvent of DMF/toluene. While under visible light, a relief of dipolar interactions between Fe₃O₄@AZO nanoparticles can induce the secondary assembly of these Fe₃O₄@AZO nanoparticles at DMF-toluene interface, resulting in DMF droplets covered by a layer of nanoparticle superlattices. More importantly, coupled with a magnetic field, these emulsion droplets can be shaped into one dimensional ones during the interfacial assembly process, thereby giving rise to dynamic emulsions controlled by light and magnetic field.

Stabilizing Aqueous Three-Dimensional Printed Constructs Using Chitosan-Cellulose Nanocrystal Assemblies

The assembly and binding of nanoparticles at the interfaces of aqueous two-phase systems enable the three-dimensional (3D) printing of all-aqueous naturally occurring materials. When a dispersion of cellulose nanocrystals (CNCs) in an aqueous solution of polyethylene glycol (PEG) is brought into contact with chitosan dissolved in an aqueous solution of dextran, the CNCs and chitosan diffuse to the interface between the two immiscible aqueous solutions, electrostatically interact, and form a solid, membranous layer sufficiently rapidly to 3D print tubules of one liquid in the other. The diameter, length, spatial arrangement, and stability of the printed tubules can be broadly controlled. Adsorption and directional diffusion of ionic species across the membranous layer make heavy metal ion removal possible. The results present a platform for fabricating and developing all-aqueous compartmentalized systems where function can be independently coupled to the inherent functionality of the nanoparticles or ligands.

Direct observation of nanoparticle-surfactant assembly and jamming at the water-oil interface

Electrostatic interactions between nanoparticles (NPs) and functionalized ligands lead to the formation of NP surfactants (NPSs) that assemble at the water-oil interface and form jammed structures. To understand the interfacial behavior of NPSs, it is necessary to understand the mechanism by which the NPSs attach to the interface and how this attachment depends on the areal coverage of the interface. Through direct observation with high spatial and temporal resolution, using laser scanning confocal microscopy and in situ atomic force microscopy (AFM), we observe that early-stage attachment of NPs to the interface is diffusion limited and with increasing areal density of the NPSs, further attachment requires cooperative displacement of the previously assembled NPSs both laterally and vertically. The unprecedented detail provided by in situ AFM reveals the complex mechanism of attachment and the deeply nonequilibrium nature of the assembly.

Adsorption and interfacial structure of nanocelluloses at fluid interfaces

Nanocelluloses (NCs), more specifically cellulose nanocrystals and nanofibrils, are a green alternative for the stabilization of fluid interfaces. The adsorption of NCs at oil-water interfaces facilitates the formation of stable and biocompatible Pickering emulsions. In contrast, unmodified NCs are not able to stabilize foams. As a consequence, NCs are often hydrophobized by covalent modifications or adsorption of surfactants, allowing also the stabilization of foams or functional inverse, double, and stimuli-responsive emulsions. Although the interfacial stabilization by NCs is readily exploited, the driving force of adsorption and stabilization mechanisms remained long unclear. Here, we summarize the recent advances in the understanding of NC adsorption regarding kinetics, isotherms, and energetic aspects, as well as their interfacial structure, surface coverage, and contact angle. We thereby distinguish unmodified NCs, covalently modified NCs, and surfactant enhanced adsorption.

Charge-driven interfacial gelation of cellulose nanofibrils across the water/oil interface

Interfacial gels, obtained by the interaction of water-dispersible oxidised cellulose nanofibrils (OCNF) and oil-soluble oleylamine (OA), were produced across water/oil (W/O) interfaces. Surface rheology experiments showed that the complexation relies on the charge coupling between the negatively-charged OCNF and OA. Complexation across the W/O interface was found to be dependent on the ζ-potential of the OCNF (modulated by electrolyte addition), leading to different interfacial properties. Spontaneous OCNF adsorption at the W/O interface occurred for particles with ζ-potential more negative than -30 mV, resulting in the formation of interfacial gels; whilst for particles with ζ-potential of ca. -30 mV, spontaneous adsorption occurred, coupled with augmented interfibrillar interactions, yielding stronger and tougher interfacial gels. On the contrary, charge neutralisation of OCNF (ζ-potential values more positive than -30 mV) did not allow spontaneous adsorption of OCNF at the W/O interface. In the case of favourable OCNF adsorption, the interfacial gel was found to embed oil-rich droplets - a spontaneous emulsification process.

Amphiphilic Dimers at Liquid-Liquid Interfaces: A Density Functional Approach

We apply density functional theory to study the structure of dimers at the interface between two partially miscible symmetric liquids. The dimers are built of two tangentially jointed spheres and do not solve the coexisting liquids. The interactions in the system are modeled using Lennard-Jones potentials with different interactions between segments of the dimers and the liquid components. We study how asymmetry of the interactions between dimers and molecules of the liquid, i.e., the degree of dimer amphiphilicity, influences the interfacial structure. Two unexpected phenomena have been found. First, for some systems, the liquid-liquid interface is able to accommodate only a finite amount of dimers. If the amount of added dimers is larger than a threshold value, a part or all of the dimers move to the interior one of the coexisting phase, forming an insoluble sheet inside it, or the initial interface splits into separate parts. The second is a peculiar behavior of the dependence of the interfacial width with an increase of the amount of added dimers. In this case, we observe a discontinuous jump that is connected with reorientation of dimers with respect to the interface.