Uniaxial Stretching-Induced Alignment of Carbon Nanotubes in Cross-Linked Elastomer Enabled by Dynamic Cross-Link Reshuffling

New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry

Covalent network polymers, as materials composed of atoms interconnected by covalent bonds in a continuous network, are known for their thermal and chemical stability. Over the past two decades, these materials have undergone significant transformations, gaining properties such as malleability, environmental responsiveness, recyclability, crystallinity, and customizable porosity, enabled by the development and integration of dynamic covalent chemistry (DCvC). In this review, we explore the innovative realm of covalent network polymers by focusing on the recent advances achieved through the application of DCvC. We start by examining the history and fundamental principles of DCvC, detailing its inception and core concepts and noting its key role in reversible covalent bond formation. Then the reprocessability of covalent network polymers enabled by DCvC is thoroughly discussed, starting from the significant milestones that marked the evolution of these polymers and progressing to their current trends and applications. The influence of DCvC on the crystallinity of covalent network polymers is then reviewed, covering their bond diversity, synthesis techniques, and functionalities. In the concluding section, we address the current challenges faced in the field of covalent network polymers and speculates on potential future directions.

Thermally Reversible Cross-Linking of Recyclable Polyamide Materials Based on Schiff Base and Diels-Alder Reactions

Recyclability of cross-link polymer materials is essential to alleviate environmental pollution caused by discarded or damaged polymers. Herein, a facile method for producing recyclable polyamide materials is developed. Linear polymer chains are constructed by Schiff base reaction between glutaraldehyde (GD) and furandiamine (FD). The linear polymer chains are crosslinked by bismaleimide (BM) to give rise to polyamide material, named GF-BMs. The resulting GF-BMs polyamide material possesses strong tensile strength (78 MPa) and good solvent resistance from room temperature to 135 °C. Especially, the thermally reversible Diels-Alder covalent bonds and dynamic imine bonds in the polymer network have a synergistic effect on fast-reprocessing, self-healing, and recyclability, which provides a new idea for recyclable materials.

Transition from Diffusive to Superdiffusive Transport in Carbon Nanotube Networks via Nematic Order Control

The one-dimensional confinement of quasiparticles in individual carbon nanotubes (CNTs) leads to extremely anisotropic electronic and optical properties. In a macroscopic ensemble of randomly oriented CNTs, this anisotropy disappears together with other properties that make them attractive for certain device applications. The question however remains if not only anisotropy but also other types of behaviors are suppressed by disorder. Here, we compare the dynamics of quasiparticles under strong electric fields in aligned and random CNT networks using a combination of terahertz emission and photocurrent experiments and out-of-equilibrium numerical simulations. We find that the degree of alignment strongly influences the excited quasiparticles' dynamics, rerouting the thermalization pathways. This is, in particular, evidenced in the high-energy, high-momentum electronic population (probed through the formation of low energy excitons via exciton impact ionization) and the transport regime evolving from diffusive to superdiffusive.

Environmentally friendly strategy to access self-healable, reprocessable and recyclable chitin, chitosan, and sodium alginate based polysaccharide-vitrimer hybrid materials

Natural polysaccharides show enviable advantages for preparation of sustainable hybrid materials. However, in most cases, complex chemical modifications of natural polysaccharides are required, which not only causes changes of the inherent properties of polysaccharides, but also increases the manufacturing costs of the final materials. Therefore, it is highly desired to develop efficient and low-cost ways to access polysaccharides-containing hybrid materials. In this work, we report the environmentally friendly preparation of a new kind of polysaccharide-based materials, called polysaccharide-vitrimer hybrid materials, for the first time. The vitrimer synthesis and hybridization with polysaccharides can be achieved via a convenient one-pot method in absence of solvent and catalyst. In addition, time-consuming and labor-intensive physical/chemical modifications of natural polysaccharides are completely avoided. The resultant hybrid materials show good mechanical performance (tensile toughness is up to 13.7 MJ/m³), high thermal stability (T_d,max is up to 457 °C), fast self-healing ability (self-healing efficiency is up to 99 % within 20s at 80 °C) and excellent reprocessability and recyclability (at least three cycles). Especially, conductive polysaccharide-vitrimer hybrid materials could be readily prepared from the resultant materials, exhibiting novel applications as flexible sensors and electromagnetic shielding materials (the EMI SE is up to 24.93 dB).

Shear-responsive boundary-lubricated hydrogels attenuate osteoarthritis

Lipid-based boundary layers formed on liposome-containing hydrogels can facilitate lubrication. However, these boundary layers can be damaged by shear, resulting in decreased lubrication. Here, a shear-responsive boundary-lubricated drug-loaded hydrogel is created by incorporating celecoxib (CLX)-loaded liposomes within dynamic covalent bond-based hyaluronic acid (HA) hydrogels (CLX@Lipo@HA-gel). The dynamic cross-linked network enables the hydrogel to get restructured in response to shear, and the HA matrix allows the accumulation of internal liposome microreservoirs on the sliding surfaces, which results in the formation of boundary layers to provide stable lubrication. Moreover, hydration shells formed surrounding the hydrogel can retard the degradation process, thus helping in sustaining lubrication. Furthermore, in vitro and in vivo experiments found that CLX@Lipo@HA-gels can maintain anabolic-catabolic balance, alleviate cartilage wear, and attenuate osteoarthritis progression by delivering CLX and shear-responsive boundary lubrication. Overall, CLX@Lipo@HA-gels can serve as shear-responsive boundary lubricants and drug-delivery vehicles to alleviate friction-related diseases like osteoarthritis.

Integrating Boronic Esters and Anthracene into Covalent Adaptable Networks toward Stimuli-Responsive Elastomers

Stimuli-responsive polymer materials have a promising potential application in many areas. However, integrating multi-stimuli into one elastomer is still a challenge. Here, we utilized boronic esters and anthracene to prepare a cross-linked poly(styrene-butadiene-styrene) (SBS) which was endowed with responsiveness to three stimuli (light, heat, and alcohols). SBS was first functionalized with a certain amount of dihydroxyl groups via a thiol-ene "click" reaction between unsaturated double bonds in PB block and thioglycerol. Then, 9-anthraceneboronic acid was applied to form a cross-linked SBS network upon heat and ultraviolet radiation (λ = 365 nm). The prepared elastomer was demonstrated to be stimuli-responsive based on the dynamic nature of boronic esters and the reversible dimerization of anthracene. In addition, the mechanical properties of the elastomer could be regulated continuously owing to the stimulus responsiveness to ultraviolet or heat.

Intrinsic carbon nanotube liquid crystalline elastomer photoactuators for high-definition biomechanics

Photoresponsive soft actuators with the unique merits of flexibility, contactless operation, and remote control have huge potential in technological applications of bionic robotics and biomedical devices. Herein, a facile strategy was proposed to prepare an intrinsically-photoresponsive elastomer by chemically grafting carbon nanotubes (CNTs) into a thermally-sensitive liquid-crystalline elastomer (LCE) network. Highly effective dispersion and nematic orientation of CNTs in the intrinsic LCE matrix were observed to yield anchoring energies ranging from 1.65 × 10^-5 J m^-2 to 5.49 × 10^-7 J m^-2, which significantly enhanced the mechanical and photothermal properties of the photoresponsive elastomer. When embedding an ultralow loading of CNTs (0.1 wt%), the tensile strength of the LCE increased by 420% to 13.89 MPa (||) and 530% to 3.94 MPa (⊥) and exhibited a stable response to repeated alternating cooling and heating cycles, as well as repeated UV and infrared irradiation. Furthermore, the shape transformation, locomotion, and photo-actuation capabilities allow the CNT/LCE actuator to be applied in high-definition biomechanical applications, such as phototactic flowers, serpentine robots and artificial muscles. This design strategy may provide a promising method to manufacture high-precision, remote-control smart devices.

High-Strength, Large-Deformation, Dual Cross-Linking Network Liquid Crystal Elastomers Based on Quadruple Hydrogen Bonds

Liquid crystal elastomers (LCEs) with large deformation under external stimuli have attracted extensive attention in various applications such as soft robotics, 4D printing, and biomedical devices. However, it is still a great challenge to reduce the damage to collimation and enhance the mechanical and actuation properties of LCEs simultaneously. Here, we construct a new method of a double cross-linking network structure to improve the mechanical properties of LCEs. The ureidopyrimidinone (UPy) group with quadruple hydrogen bonds was used as the physical cross-linking unit, and pentaerythritol tetra(3-mercaptopropionate) was used as the chemical cross-link. The LCEs showed a strong mechanical tensile strength of 8.5 MPa and excellent thermally induced deformation (50%). In addition, the introduction of quadruple hydrogen bonds endows self-healing ability to extend the service life of LCEs. This provides a generic strategy for the fabrication of high-strength LCEs, inspiring the development of actuators and artificial muscles.

Colloidal Self-Assembly Approaches to Smart Nanostructured Materials

Colloidal self-assembly refers to a solution-processed assembly of nanometer-/micrometer-sized, well-dispersed particles into secondary structures, whose collective properties are controlled by not only nanoparticle property but also the superstructure symmetry, orientation, phase, and dimension. This combination of characteristics makes colloidal superstructures highly susceptible to remote stimuli or local environmental changes, representing a prominent platform for developing stimuli-responsive materials and smart devices. Chemists are achieving even more delicate control over their active responses to various practical stimuli, setting the stage ready for fully exploiting the potential of this unique set of materials. This review addresses the assembly of colloids into stimuli-responsive or smart nanostructured materials. We first delineate the colloidal self-assembly driven by forces of different length scales. A set of concepts and equations are outlined for controlling the colloidal crystal growth, appreciating the importance of particle connectivity in creating responsive superstructures. We then present working mechanisms and practical strategies for engineering smart colloidal assemblies. The concepts underpinning separation and connectivity control are systematically introduced, allowing active tuning and precise prediction of the colloidal crystal properties in response to external stimuli. Various exciting applications of these unique materials are summarized with a specific focus on the structure-property correlation in smart materials and functional devices. We conclude this review with a summary of existing challenges in colloidal self-assembly of smart materials and provide a perspective on their further advances to the next generation.

Self-Healing, Self-Adhesive Strain Sensors Made with Carbon Nanotubes/Polysiloxanes Based on Unsaturated Carboxyl-Amine Ionic Interactions

Strain sensors with high sensitivity, long-term durability, and stretchability are required for flexible and wearable electronic devices. This paper reports a bilayer strain sensor consisting of carboxyl-functionalized carbon nanotubes (CNTs) and ionically crosslinked polysiloxane substrates based on unsaturated acid-amine interactions. Vacuum filtration was adopted to prepare the CNT films (2.74-4.70 μm in thickness) onto the polysiloxane substrates to prepare stretchable conductive strain sensors. The strain sensor exhibited self-healing ability, self-adhesiveness, high sensitivity, linearity, low hysteresis, and long-term durability with a gauge factor of 33.99 at 55% strain. The sensitivity and linearity could be adjusted by the thickness of the CNT layer. A crack-related mechanism was proposed in which increasing the thickness of the CNT layer led to simultaneously enhanced sensitivity and linearity. Finally, we investigated the detection of human activities (bending/unbending of fingers or knees) and subtle motions (coughing and swallowing). The fabricated strain sensor succeeded in meeting various needs with satisfactory sensing performance.

Generic Method to Create Segregated Structures toward Robust, Flexible, Highly Conductive Elastomer Composites

Electrically and thermally conductive polymer composites are extensively used in our daily life. It is of great significance to fulfill the conductivity requirement while maintaining desirable mechanical performance. An efficient solution to achieve this goal is to construct segregated structures in polymer composites by confining fillers into the interstitial areas among polymer domains. Thus far, it still remains a challenge to create segregated structures in cross-linked polymeric networks. Herein, we report a facile methodology to construct segregated structures in sulfur-cured rubbers using an industrially accessible process toward robust, flexible, highly conductive elastomer composites. Specifically, natural rubber granules (NR-RGs) with reactive di- and polysulfides on the surface are fabricated and then mixed with NR gum, carbon nanotubes (CNTs), and curing additives, followed by compression molding to yield two-phase separate composites. In the composites, CNTs are selectively dispersed in the continuous NR phase due to the volume exclusion effect caused by the separate NR-RG phase, leading to overwhelming electrical conductivity compared to the counterparts with randomly dispersed CNTs. In addition, NR-RGs can serve as novel reinforcement for NR, imparting the composites with remarkably improved modulus and retained stretchability. The simultaneously improved electrical conductivity and mechanical properties are due to the strong interfacial adhesion between the NR matrix and NR-RGs, as the di- and polysulfides on the surface of NR-RGs can participate in the cross-linking reactions of NR gum and enable the establishment of covalent bonding across the interfaces. The universality of this approach in preparing segregated composites with a combination of high conductivities and robust mechanical properties is demonstrated using other diene rubbers as the matrix and boron nitride as the filler.

The recovery of nano-sized carbon black filler structure and its contribution to stress recovery in rubber nanocomposites

The hierarchical structural evolution of natural rubber (NR) filled with different contents of nanoscale carbon black (CB) (10 phr-CB10 and 50 phr-CB50) after first loading and recovering for different times was investigated by X-ray nano-CT, wide-angle X-ray scattering (WAXS) and solid state NMR techniques. The CB filler structures as captured by X-ray nano-CT recover gradually with increasing recovering time, but the filler network with different CB contents shows dramatically different structure evolution. For CB10, limited by the filling content, CB particles mainly induces a hydrodynamic effect in spite of deformation or recovering. For CB50, the CB filler forms a 3D connected network, partially destructed during deformation, and the destructed part can be partially recovered during recovery. This suggests that the connected CB filler structure mainly acts as a network reinforcement, whereas the destructed part can induce a hydrodynamic effect. The different effects induced by different CB filling contents are also reflected by the NR matrix, which is reflected by the onset strains εc of strain-induced crystallization (SIC) of NR as captured by WAXS. For CB10, εc remains almost constant, i.e. εc = ca. 1.49, while that of NR with CB50 slightly decreases from initial ca. 1.12 to 0.96 with increasing recovering time up to 50 h. Also, the bound rubber fraction and entangled rubber network remain unchanged after deformation and under different recovery time as detected by the magic sandwich echo (MSE) FID and proton multiple quantum (MQ) NMR. These results demonstrate the key role of the CB filler network in determining the stress-softening behavior of reinforced rubber.

Vitrimers: directing chemical reactivity to control material properties

The development of more sustainable materials with a prolonged useful lifetime is a key requirement for a transition towards a more circular economy. However, polymer materials that are long-lasting and highly durable also tend to have a limited application potential for re-use. This is because such materials derive their durable properties from a high degree of chemical connectivity, resulting in rigid meshes or networks of polymer chains with a high intrinsic resistance to deformation. Once such polymers are fully synthesised, thermal (re)processing becomes hard (or impossible) to achieve without damaging the degree of chemical connectivity, and most recycling options quickly lead to a drop or even loss of material properties. In this context, both academic and industrial researchers have taken a keen interest in materials design that combines high degrees of chemical connectivity with an improved thermal (re)processability, mediated through a dynamic exchange reaction of covalent bonds. In particular vitrimer materials offer a promising concept because they completely maintain their degree of chemical connectivity at all times, yet can show a clear thermally driven plasticity and liquid behavior, enabled through rapid bond rearrangement reactions within the network. In the past decade, many suitable dynamic covalent chemistries were developed to create vitrimer materials, and are now applicable to a wide range of polymer matrices. The material properties of vitrimers, however, do not solely rely on the chemical structure of the polymer matrix, but also on the chemical reactivity of the dynamic bonds. Thus, chemical reactivity considerations become an integral part of material design, which has to take into account for example catalytic and cross-reactivity effects. This mini-review will aim to provide an overview of recent efforts aimed at understanding and controlling dynamic cross-linking reactions within vitrimers, and how directing this chemical reactivity can be used as a handle to steer material properties. Hence, it is shown how a focus on a fundamental chemical understanding can pave the way towards new sustainable materials and applications.