Redox Flow Batteries: How to Determine Electrochemical Kinetic Parameters

N,N'-Diaryl-Sulfurdiimides are Strongly Redox Tuned

The synthesis and extensive characterization of nine aryl sulfur diimides (SDIs, Ar-NSN-Ar) are presented with a robust computational and experimental investigation of the fundamental properties of these important members of the thiazyl family of compounds, with particular attention paid to their highly tunable electrochemical behaviour. This is the first work to undertake a systematic comparison of the electrochemical profiles of a coherent series of SDIs to demonstrate and quantify the response of their reduction potentials to substituent electron-donating and -withdrawing properties. This effect is found to be not only exceptionally strong, but also correlates very closely with computed orbital energies. Electron paramagnetic resonance spectroscopy is used to determine the nature, localization, and qualitative lifetimes of the radical anions of SDIs. This work also addresses significant misconceptions about physical properties of SDIs. Experimental data and modern computational methods are employed to provide a resolute answer to the long-standing contention of the solution-state conformations of SDIs, and to correct historical mistakes in the assignment of infrared spectroscopic data. High-quality crystal structures of all SDIs in this work showcase the utility of the recently introduced structural refinement software NoSpherA2, enabling full anisotropic refinement of H-atoms with accurate C-H bond lengths.

Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study

One of the significant challenges of vanadium redox flow batteries is connected to the negative electrode where the main reaction of V(ii)/V(iii) and the side reaction of hydrogen evolution compete. To address this issue, we used titanium carbide (Ti3C2Tx) MXene coating via drop-casting to introduce oxygen functional groups and metals on the carbon electrode surface. Characterization through scanning electron microscopy and X-ray photoelectron spectroscopy confirmed the even distribution of Ti3C2Tx MXene on the electrodes and the presence of titanium and termination groups (-O, -Cl, and -F). The cyclic voltammetry analysis of MXene-coated electrodes showed more sharp electrochemical peaks for the V(ii)/V(iii) reaction than thermal-treated electrodes, even at relatively high scan rates. Notably, a relatively high reaction rate of 5.61 × 10-4 cm s-1 was achieved for the V(ii)/V(iii) reaction on MXene-coated electrodes, which shows the competitiveness of the method compared to thermal treatment (4.17 × 10-4 cm s-1). The flow battery tests, at a current density of 130 mA cm-2, using MXene-coated electrodes showed pretty stable discharge capacity for over 100 cycles. In addition, the voltage and energy efficiency were significantly higher than those of the system using untreated electrodes. Overall, this work highlights the potential application of MXene coating in carbon electrode treatment for vanadium redox flow batteries due to remarkable electrocatalytic activity and battery performance, providing a competitive method for thermal treatment.

From Inorganic to Organic Iodine: Stabilization of I+ Enabling High-Energy Lithium-Iodine Battery

Organic materials have been considered a class of promising cathodes for metal-ion batteries because of their sustainability in preparation and source. However, organic batteries with high energy density and application potential require high discharge voltage, multielectron transfer, and long cycling performance. Here, we report an exceptional lithium-iodine (Li//I2) battery, in which the organic iodine (BPD-HI) cathode formed by the Lewis acid-base coordination between hydroiodic acid (HI) and 4,4'-bipyridine (BPD) allows 2e- transfer via the I-/I0 and I0/I+ redox couples. The I+ stabilized by BPD exhibits a high discharge voltage plateau at ∼3.4 V. Remarkably, from inorganic to organic iodine, it realizes a 2-fold increase in the achieved capacity, up to ∼400 mA h gI-1 (Theor. 422 mA h gI-1 and 245.6 mA h g-1 based on the mass of BPD-HI), and an over 2-fold energy density, reaching 1160 W h kgI-1 (Theor. 1324 W h kgI-1). More importantly, a capacity retention rate of 85% over 850 cycles is attained for the Li//BPD-HI battery at a current density of 2 A gI-1. This facile strategy enables positively charged I+ to be electrochemically active in a rechargeable lithium battery. The new redox chemistry discovered provides new insights for developing organic batteries with high energy density.

Mononuclear η6-arene ruthenium(II) complexes with pyrazolyl-pyridazine ligands: synthesis, CT-DNA binding, reactivity towards glutathione, and cytotoxicity

Organometallic η6-arene ruthenium(II) complexes with 3-chloro-6-(1H-pyrazol-1-yl)pyridazine (Ru1, Ru2, and Ru5) and 3-chloro-6-(3,5-dimethyl-1H-pyrazol-1-yl)pyridazine (Ru3-4) N,N' heterocyclic and η6-arene (cymene (Ru1-4) or toluene (Ru 5)) have been synthesized. The ruthenium(II) complexes have common "three-legged piano-stool" pseudo-octahedral structures known for half-sandwich complexes. Evolution of their UV-Visible absorption spectra in PBS buffer or DMSO over 24 h confirmed their good solvolysis stability. Titrations of the complexes with the calf thymus DNA (CT-DNA) were monitored using UV-Visible absorption and fluorescence spectroscopies. The complexes interact moderately with CT-DNA and their binding constants are in the order of 104 M-1. Competitive binding of the complexes to a DNA-Hoechst 33,258 depicted competitive displacement of Hoechst from DNA's minor grooves. These complexes bind to glutathione forming GSH-adducts through S coordination by replacement of a halide, with the iodo-analogues having higher binding constants than the chloro-complexes. Cyclic voltammograms of the complexes exhibited one electron-transfer quasi-reversible process. Trends in the molecular docking data of Ru1-5/DNA were similar to those for DNA binding constants. Of the five, only Ru1, Ru3 and Ru5 showed some activity (moderate) against the MCF-7 breast cancer cells with IC50 values in the range of 59.2-39.9 for which Ru5 was the most active. However, the more difficult-to-treat cell line, MDA-MB 231 cell was recalcitrant to the treatment by these complexes.

Development of highly sensitive electrochemical immunosensor using PPy-MoS2-based nanocomposites modified with 90 MeV C6+ ion beams

The evaluation of electrochemical sensing activity of hydrothermally derived PPy-MoS2-based nanocomposites subjected to 90 MeV C6+ ion beam with fluence ranging, 1.0 × 1010-1.0 × 1013 ions/cm2, is reported. Cross-linking, chain scissioning, and ion track formation could occur in the irradiated systems, as revealed from Fourier transform infrared (FTIR) spectroscopy and field emission scanning electron microscopy (FE-SEM) studies. Electrochemical studies, viz., cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were performed in 0.1 M phosphate buffer solution (PBS) containing 5 mM K3[Fe(CN)6] as redox probe. High redox activity, lower charge transfer resistance (Rct = 490 Ω) and larger electroactive area (A = 0.4485 cm2) were obtained in case of the composite system irradiated with a fluence of 3.5 × 1011 ions/cm2. Immunosensor fabrication was executed via immobilization of mouse IgG over the pristine and post-irradiated electrodes. Afterwards, differential pulse voltammetry (DPV) was performed within the potential window - 0.2 to + 0.6 V (vs. Ag/AgCl) for the detection of specific analyte. Noticeably, the electrode system irradiated with a fluence of 3.5 × 1011 ions/cm2 is characterized by a lower limit of detection (LOD) of 0.203 nM and a higher sensitivity value of 10.0 µA mL ng-1 cm-2. The energetic particle irradiation at a modest fluence can offer beneficial effects to the PPy-MoS2-based nanohybrid system providing immense scope as advanced electrochemical biosensor.

Decoupling Activation and Transport by Electron-Regulated Atomic-Bi Harnessed Surface-to-Pore Interface for Vanadium Redox Flow Battery

Vanadium redox flow battery (VRFB) promises a route to low-cost and grid-scale electricity storage using renewable energy resources. However, the interplay of mass transport and activation processes of high-loading catalysts makes it challenging to drive high-performance density VRFB. Herein, a surface-to-pore interface design that unlocks the potential of atomic-Bi-exposed catalytic surface via decoupling activation and transport is reported. The functional interface accommodates electron-regulated atomic-Bi catalyst in an asymmetric Bi─O─Mn structure that expedites the V3+ /V2+ conversion, and a mesoporous Mn3 O4 sub-scaffold for rapid shuttling of redox-active species, whereby the site accessibility is maximized, contrary to conventional transport-limited catalysts. By in situ grafting this interface onto micron-porous carbon felt (Bi1 -sMn3 O4 -CF), a high-performance flow battery is achieved, yielding a record high energy efficiency of 76.72% even at a high current density of 400 mA cm-2 and a peak power density of 1.503 W cm-2 , outdoing the battery with sMn3 O4 -CF (62.60%, 0.978 W cm-2 ) without Bi catalyst. Moreover, this battery renders extraordinary durability of over 1500 cycles, bespeaking a crucial breakthrough toward sustainable redox flow batteries (RFBs).

Charge Transfer Kinetics of Redox-Active Microgels

Polymer microgel particles decorated with redox-active functional groups are a new and promising object for electrochemical applications. However, the process of charge exchange between an electrode and a microgel particle carrying numerous redox-active centers differs fundamentally from charge exchange involving only molecular species. A single act of contact between the microgel and the electrode surface may not be enough to fully discharge the microgel, and partial charge states are to be expected. Understanding the specifics of this process is crucial for the correct analysis of the data obtained from electrochemical experiments with redox-active microgel solutions. In this study, we employed coarse-grained molecular dynamics to investigate in detail the act of charge transfer from a microgel particle to a flat electrode. The simulations take into account both the mobility of functional groups carrying the charge, which depend on the microgel architecture and the charge exchange between the groups, which can accelerate the propagation of charge within the microgel volume. A set of different microgel systems were simulated in order to reveal the impact of their characteristics: fraction of redox-active groups, microgel molecular mass, cross-linker content, cross-linking topology, and solvent quality. We have found trends in microgel composition leading to the most efficient charge transfer kinetics. The obtained results would be useful for understanding experimental results and for optimizing the design of redox-active microgel particles aimed at faster discharge rates.

Active Learning Guided Computational Discovery of Plant-Based Redoxmers for Organic Nonaqueous Redox Flow Batteries

Organic nonaqueous redox flow batteries (O-NRFBs) are promising energy storage devices due to their scalability and reliance on sourceable materials. However, finding suitable redox-active organic molecules (redoxmers) for these batteries remains a challenge. Using plant-based compounds as precursors for these redoxmers can decrease their costs and environmental toxicity. In this computational study, flavonoid molecules have been examined as potential redoxmers for O-NRFBs. Flavone and isoflavone derivatives were selected as catholyte (positive charge carrier) and anolyte (negative charge carrier) molecules, respectively. To drive their redox potentials to the opposite extremes, in silico derivatization was performed using a novel algorithm to generate a library of > 40000 candidate molecules that penalizes overly complex structures. A multiobjective Bayesian optimization based active learning algorithm was then used to identify best redoxmer candidates in these search spaces. Our study provides methodologies for molecular design and optimization of natural scaffolds and highlights the need of incorporating expert chemistry awareness of the natural products and the basic rules of synthetic chemistry in machine learning.

Functional materials for aqueous redox flow batteries: merits and applications

Redox flow batteries (RFBs) are promising electrochemical energy storage systems, offering vast potential for large-scale applications. Their unique configuration allows energy and power to be decoupled, making them highly scalable and flexible in design. Aqueous RFBs stand out as the most promising technologies, primarily due to their inexpensive supporting electrolytes and high safety. For aqueous RFBs, there has been a skyrocketing increase in studies focusing on the development of advanced functional materials that offer exceptional merits. They include redox-active materials with high solubility and stability, electrodes with excellent mechanical and chemical stability, and membranes with high ion selectivity and conductivity. This review summarizes the types of aqueous RFBs currently studied, providing an outline of the merits needed for functional materials from a practical perspective. We discuss design principles for redox-active candidates that can exhibit excellent performance, ranging from inorganic to organic active materials, and summarize the development of and need for electrode and membrane materials. Additionally, we analyze the mechanisms that cause battery performance decay from intrinsic features to external influences. We also describe current research priorities and development trends, concluding with a summary of future development directions for functional materials with valuable insights for practical applications.

The Role of Proton in High Power Density Vanadium Redox Flow Batteries

To design high-performance vanadium redox flow batteries (VRFBs), the influence of proton on electrocatalysts cannot be neglected considering the abundance of proton in a highly acidic electrolyte. Herein, the impact of proton on metal oxide-based electrocatalysts in VRFBs is investigated, and a proton-incorporating strategy is introduced for high power density VRFBs, in addition to unraveling the catalytic mechanism. This study discloses that the metal oxide-based electrocatalyst (WO3) undergoes in situ surface reconstruction by forming H0.5WO3 after incorporating proton. Experimental and theoretical results precisely disclose the catalytic active sites. The battery with H0.5WO3 designed by a proton-incorporating strategy achieves an attractive power density of 1.12 W cm-2 and sustains more than 900 cycles without an obvious decay, verifying the outstanding electrochemical performance of H0.5WO3. This work not only sheds light on the influence of proton on electrocatalysts for rational design of advanced VRFBs catalysts but also provides guidelines for the fundamental understanding of the reaction mechanism, which is highly important for the application of VRFBs.

Phase Behavior and Electrochemical Properties of Highly Asymmetric Redox Coacervates

This work reports the phase behavior and electrochemical properties of liquid coacervates made of ferricyanide and poly(ethylenimine). In contrast to the typical polyanion/polycation pairs used in liquid coacervates, the ferricyanide/poly(ethylenimine) system is highly asymmetric because poly(ethylenimine) has approximately 170 charges per molecule, while ferricyanide has only 3. Two types of phase diagrams were measured and fitted with a theoretical model. In the first type of diagram, the stability of the coacervate was studied in the plane given by the concentration of poly(ethylenimine) versus the concentration of ferricyanide for a fixed concentration of added monovalent salt (NaCl). The second type of diagram involved the plane given by the concentration of poly(ethylenimine) vs the concentration of the added monovalent salt for a fixed poly(ethyleneimine)/ferricyanide ratio. Interestingly, these phase diagrams displayed qualitative similarities to those of symmetric polyanion/polycation systems, suggesting that coacervates formed by a polyelectrolyte and a small multivalent ion can be treated as a specific case of polyelectrolyte coacervate. The characterization of the electrochemical properties of the coacervate revealed that the addition of monovalent salt greatly enhances charge transport, presumably by breaking ion pairs between ferricyanide and poly(ethylenimine). This finding highlights the significant influence of added salt on the transport properties of coacervates. This study provides the first comprehensive characterization of the phase behavior and transport properties of asymmetric coacervates and places these results within the broader context of the better-known symmetric polyelectrolyte coacervates.

Indolo[2,3-b]quinoxaline as a Low Reduction Potential and High Stability Anolyte Scaffold for Nonaqueous Redox Flow Batteries

Redox flow batteries (RFBs) are a promising stationary energy storage technology for leveling power supply from intermittent renewable energy sources with demand. A central objective for the development of practical, scalable RFBs is to identify affordable and high-performance redox-active molecules as storage materials. Herein, we report the design, synthesis, and evaluation of a new organic scaffold, indolo[2,3-b]quinoxaline, for highly stable, low-reduction potential, and high-solubility anolytes for nonaqueous redox flow batteries (NARFBs). The mixture of 2- and 3-(tert-butyl)-6-(2-methoxyethyl)-6H-indolo[2,3-b]quinoxaline exhibits a low reduction potential (-2.01 V vs Fc/Fc+), high solubility (>2.7 M in acetonitrile), and remarkable stability (99.86% capacity retention over 49.5 h (202 cycles) of H-cell cycling). This anolyte was paired with N-(2-(2-methoxyethoxy)-ethyl)phenothiazine (MEEPT) to achieve a 2.3 V all-organic NARFB exhibiting 95.8% capacity retention over 75.1 h (120 cycles) of cycling.

Nonconjugated Redox-Active Polymers: Electron Transfer Mechanisms, Energy Storage, and Chemical Versatility

The storage of electric energy in a safe and environmentally friendly way is of ever-growing importance for a modern, technology-based society. With future pressures predicted for batteries that contain strategic metals, there is increasing interest in metal-free electrode materials. Among candidate materials, nonconjugated redox-active polymers (NC-RAPs) have advantages in terms of cost-effectiveness, good processability, unique electrochemical properties, and precise tuning for different battery chemistries. Here, we review the current state of the art regarding the mechanisms of redox kinetics, molecular design, synthesis, and application of NC-RAPs in electrochemical energy storage and conversion. Different redox chemistries are compared, including polyquinones, polyimides, polyketones, sulfur-containing polymers, radical-containing polymers, polyphenylamines, polyphenazines, polyphenothiazines, polyphenoxazines, and polyviologens. We close with cell design principles considering electrolyte optimization and cell configuration. Finally, we point to fundamental and applied areas of future promise for designer NC-RAPs.

Carbon Nanotube-Incorporated Nanofibers for Immunosensor Preparation against CD36

The increased serum concentration of CD36 is significantly associated with atherosclerosis, insulin resistance, and diabetes mellitus. Currently, there is no sensor system used for the detection of CD36 in the clinical field. Therefore, there is a need to develop a sensor system for the detection of CD36. The large surface area/volume ratio and controllable surface conformation of electrospun nanofibers (ENs) make them highly attractive for immunosensor applications. In the present study, PS/MWCNT-PAMAM ENs were produced and used as an immobilization matrix of Anti-CD36. Thus, the electrochemical behavior of the developed nanocomposite-based ENs and their usage potential were investigated for immunosensor applications. First, an oxidized multiwall carbon nanotube (MWCNT-OH) was synthesized and modified with a polyamidoamine generation 3 (PAMAM G3) dendrimer. The synthesized MWCNT-PAMAM nanocomposite was mixed with polystyrene (PS) solutions at different ratios to produce bead-free, smooth, and uniform PS/MWCNT-PAMAM ENs. PS/MWCNT-PAMAM ENs were accumulated on a screen-printed carbon electrode (SPCE) using the electrospinning technique. A biofunctional surface on the PS/MWCNT-PAMAM EN-coated SPCE was created using carbodiimide chemistry by covalent immobilization of Anti-CD36. The analytic performance characteristics of the developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor were determined by performing electrochemical measurements in the presence of the CD36 protein. The linear detection range was found to be from 5 to 40 ng/mL, and the limit of detection was calculated as 3.94 ng/mL for CD36. The developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor also displayed high tolerance to interference substances, good repeatability, and high recovery percent (recovery%) for artificial blood serum analysis.

An SECM-Based Spot Analysis for Redoxmer-Electrode Kinetics: Identifying Redox Asymmetries on Model Graphitic Carbon Interfaces

The fundamental process in non-aqueous redox flow battery (NRFB) operation revolves around electron transfer (ET) between a current collector electrode and redox-active organic molecules (redoxmers) in solution. Here, we present an approach utilizing scanning electrochemical microscopy (SECM) to evaluate interfacial ET kinetics between redoxmers and various electrode materials of interest at desired locations. This spot-analysis method relies on the measurement of heterogeneous electron transfer rate constants (k_f or k_b ) as a function of applied potential (E-E⁰ '). As demonstrated by COMSOL simulations, this method enables the quantification of Butler-Volmer kinetic parameters, the standard heterogeneous rate constant, k⁰ , and the transfer coefficient, α. Our method enabled the identification of inherent asymmetries in the ET kinetics arising during the reduction of ferrocene-based redoxmers, compared to their oxidation which displayed faster rate constants. Similar behavior was observed on a wide variety of carbon electrodes such as multi-layer graphene, highly ordered pyrolytic graphite, glassy carbon, and chemical vapor deposition-grown graphite films. However, aqueous systems and Pt do not exhibit such kinetic effects. Our analysis suggests that differential adsorption of the redoxmers is insufficient to account for our observations. Displaying a greater versatility than conventional electroanalytical methods, we demonstrate the operation of our spot analysis at concentrations up to 100 mM of redoxmer over graphite films. Looking forward, our method can be used to assess non-idealities in a variety of redoxmer/electrode/solvent systems with quantitative evaluation of kinetics for applications in redox-flow battery research.

Electrochromic Performance of Sputtered NbTi-Based Mixed Metal Oxide Thin Films with a Metallic Seed Layer

An attempt has been made to promote the efficiency of the electrochromic (EC) windows to perform at a faster switching rate with good coloration and easy recyclability. In this work, ion-assisted pulsed DC unbalanced confocal magnetron sputtering is used to fabricate mixed metal oxide thin films of Nb and Ti (which are termed as NTO) for EC applications. Further, to increase the EC efficiency of this film, a very thin metallic seed layer is incorporated between the substrate and the film using the layer-by-layer (LBL) coating strategy. The film was prepared by two steps: (i) very thin metallic seed layer coating and (ii) mixed metal oxide NTO layer coating. The metal layer was made of a Nb metal, Ti metal, and NbTi mixed metal, which was coated with the substrate and NTO layer, resulting in three different films, namely, Nb-NTO, Ti-NTO, and NbTi-NTO. The EC properties of these three films were studied in 1 M LiClO₄ dissolved in propylene carbonate and compared with the as-prepared NTO film. The results showed that the Nb-NTO film showed better EC properties, fast switching, better stability, and good recyclability. To check the stability, the film was subjected to prolonged cycling of 500 cycles with a harsh anodic and cathodic sweep at the scan rate of 100 mV s^-1. The UV-Vis spectrum confirmed the Li⁺ trapping in the films after prolonged cycling. To detrap the ions from the host surface, galvanostatic detrapping is carried out called rejuvenation studies. The rejuvenation rate of films is studied at a constant current loading of ∼2 × 10^-5 A cm^-2. To check the commercialization of the EC window, we successfully fabricated the Nb-NTO device with a PEO-LiClO₄-based polymer gel electrolyte.

Synthesis and Characterization of Dense Carbon Films as Model Surfaces to Estimate Electron Transfer Kinetics on Redox Flow Battery Electrodes

Redox flow batteries (RFBs) are a promising electrochemical technology for the efficient and reliable delivery of electricity, providing opportunities to integrate intermittent renewable resources and to support unreliable and/or aging grid infrastructure. Within the RFB, porous carbonaceous electrodes facilitate the electrochemical reactions, distribute the flowing electrolyte, and conduct electrons. Understanding electrode reaction kinetics is crucial for improving RFB performance and lowering costs. However, assessing reaction kinetics on porous electrodes is challenging as their complex structure frustrates canonical electroanalytical techniques used to quantify performance descriptors. Here, we outline a strategy to estimate electron transfer kinetics on planar electrode materials of similar surface chemistry to those used in RFBs. First, we describe a bottom-up synthetic process to produce flat, dense carbon films to enable the evaluation of electron transfer kinetics using traditional electrochemical approaches. Next, we characterize the physicochemical properties of the films using a suite of spectroscopic methods, confirming that their surface characteristics align with those of widely used porous electrodes. Last, we study the electrochemical performance of the films in a custom-designed cell architecture, extracting intrinsic heterogeneous kinetic rate constants for two iron-based redox couples in aqueous electrolytes using standard electrochemical methods (i.e., cyclic voltammetry, electrochemical impedance, and spectroscopy). We anticipate that the synthetic methods and experimental protocols described here are applicable to a range of electrocatalysts and redox couples.

Challenges and opportunities in continuous flow processes for electrochemically mediated carbon capture

Carbon capture from both stationary emitters and dilute sources is critically needed to mitigate climate change. Carbon dioxide separation methods driven by electrochemical stimuli show promise to sidestep the high-energy penalty and fossil-fuel dependency associated with the conventional pressure and temperature swings. Compared with a batch process, electrochemically mediated carbon capture (EMCC) operating in a continuous flow mode offers greater design flexibility. Therefore, this review introduces key advances in continuous flow EMCC for point source, air, and ocean carbon captures. Notably, the main challenges and future research opportunities for practical implementation of continuous flow EMCC processes are discussed from a multi-scale perspective, from molecules to electrochemical cells and finally to separation systems.

Efficient Point-of-Care Detection of Uric Acid in the Human Blood Sample with an Enhanced Electrocatalytic Response Using Nanocomposites of Cobalt and Mixed-Valent Molybdenum Sulfide

This work efficiently detects uric acid (UA) in a human blood sample using cobalt nanoparticle-immobilized mixed-valent molybdenum sulfide on the copper substrate in a point-of-care (PoC) device. The sensor electrode was fabricated by micromachining of Cu clad boards employing an engraver to generate a three-electrode system consisting of working electrode (WE), reference electrode (RE), and counter electrode (CE). The WE was subjected to physical vapor deposition of mixed-valent MoSx layers by a reaction between Mo(CO)6 and H2S at ∼200 °C using a simple setup following which CoNPs were electrochemically deposited. The RE and CE were covered with Ag/AgCl and Ag paste, respectively. A plasma separation membrane acted as the medium of UA/blood serum delivery to the electrodes. The material and electrochemical characterization confirmed that CoNPs over MoSx provided an enlarged electroactive surface for the direct electron transfer to achieve an enhanced electrocatalytic response. The binary combination of CoNPs and MoSx layers over the Cu electrode reduced the charge-transfer resistance by two times, enhanced the surface adsorption by more than two times, and yielded a high diffusion coefficient of 3.46 × 10-3 cm2/s. These interfacial effects facilitated the UA oxidation, leading to unprecedented mA range current density for UA sensing for the PoC device. The electrochemical detection tests in the PoC device revealed a sensitivity of 64.7 μA/μM cm-2, which is ∼50 times higher compared to the latest reported value (1.23 μA/μM cm-2), a high limit of detection of 5 nM, and shelf life of 6 months, confirming the synergistic effect-mediated high sensitivity under PoC settings. Interference tests confirmed no intervention of similar analytes. Tests on blood samples demonstrated a recovery percentage close to 100% in human serum UA, signifying the suitability of the nanocomposite-based sensor and the PoC device for clinical sensing applications.

Exploring carbonyl chemistry in non-aqueous Mg flow batteries

Non-aqueous redox flow batteries (RFBs) are emerging electrochemical technologies for grid energy storage. Non-aqueous Mg RFBs that use Mg metal as the anode are especially promising due to various benefits of the Mg metal anode, including its low potential, high volumetric capacity, SEI-free, highly reversible operation and low cost. Despite the potential, there are rarely any studies on developing non-aqueous Mg RFBs. Herein, a non-aqueous Mg redox flow battery using a polymer catholyte is reported. Through rational molecular engineering, a carbonyl-based moiety is combined with a polyethylene glycol moiety to achieve a polymer with high voltage and high solubility in the ether-based electrolyte. A series of polymers with different polyethylene glycol chain lengths are synthesized and their performances are measured first at the molecular level, and then at the device level in a Mg redox flow battery using a Mg foil as the anode, the polymer solution as the catholyte and a porous membrane as the separator. The flow battery delivers a voltage of 1.8 V, a maximum capacity of 475 mAh/L, and an energy density of 0.855 Wh/L. Systematic mechanistic studies are performed to understand the performance decay mechanism and possible strategies for future improvement are discussed. This work opens a new avenue for the development of energy storage technologies for grid electricity storage.

Emerging chemistries and molecular designs for flow batteries

Redox flow batteries are a critical technology for large-scale energy storage, offering the promising characteristics of high scalability, design flexibility and decoupled energy and power. In recent years, they have attracted extensive research interest, with significant advances in relevant materials chemistry, performance metrics and characterization. The emerging concepts of hybrid battery design, redox-targeting strategy, photoelectrode integration and organic redox-active materials present new chemistries for cost-effective and sustainable energy storage systems. This Review summarizes the recent development of next-generation redox flow batteries, providing a critical overview of the emerging redox chemistries of active materials from inorganics to organics. We discuss electrochemical characterizations and critical performance assessment considering the intrinsic properties of the active materials and the mechanisms that lead to degradation of energy storage capacity. In particular, we highlight the importance of advanced spectroscopic analysis and computational studies in enabling understanding of relevant mechanisms. We also outline the technical requirements for rational design of innovative materials and electrolytes to stimulate more exciting research and present the prospect of this field from aspects of both fundamental science and practical applications.

Effective Design Strategy of Small Bipolar Molecules through Fused Conjugation toward 2.5 V Based Redox Flow Batteries

Using bipolar redox-active molecules (BRMs) as active materials is a practical way to address electrolyte crossover and resultant unpredictable side reactions in redox-flow batteries. However, the development of BRMs is greatly hindered by difficulties in finding new molecules from limited redox-active moieties and in achieving high cell voltage to compete with existing flow battery chemistries. This study proposes a strategy for design of high-voltage BRMs using fused conjugation that regulates the redox potential of integrated redox-active moieties. As a demonstration, quaternary N and ketone redox moieties are used to construct a new BRM that shows a prominent voltage gap with good electrochemical stability. A symmetrical redox-flow cell based on this molecule exhibits a high voltage of 2.5 V and decent cycling stability. This study provides a general strategy for designing new BRMs that may enrich the cell chemistries of organic redox-flow batteries.

Electrochemical One-Step Immunoassay Based on Switching Peptides and Pyrolyzed Carbon Electrodes

Switching peptides were designed to bind reversibly to the binding pocket of antibodies (IgG) by interacting with frame regions (FRs). These peptides can be quantitatively released when antigens bind to IgG. As FRs have conserved amino acid sequences, switching peptides can be used as antibodies for different antigens and different source animals. In this study, an electrochemical one-step immunoassay was conducted using switching peptides labeled with ferrocene for the quantitative measurement of analytes. For the effective amperometry of the switching peptides labeled with ferrocene, a pyrolyzed carbon electrode was prepared by pyrolysis of the parylene-C film. The feasibility of the pyrolyzed carbon electrode for the electrochemical one-step immunoassay was determined by analyzing its electrochemical properties, such as its low double-layer capacitance (C_dl), high electron transfer rate (k_app), and wide electrochemical window. In addition, the factors influencing the amperometry of switching peptides labeled with ferrocene were analyzed according to the hydrodynamic radius, the number of intrahydrogen bonds, dipole moments, and diffusion coefficients. Finally, the applicability of the electrochemical one-step immunoassay for the medical diagnosis of the human hepatitis B surface antigen (hHBsAg) was assessed.

3-D printed electrode integrated sensing chip and a PoC device for enzyme free electrochemical detection of blood urea

Herein we report a novel electrochemical sensing chip and a point-of-care device (PoC) for enzyme-free electrochemical detection of urea in human blood. The electrochemical sensing chip was developed by 3-D printing of conductive Ag ink and subsequent electrodeposition of AuNP-rGO nanocomposite. Material characterization of the sensing chip was conducted to find a plausible mechanism for the electrochemical reaction with urea. Subsequently, the response with varying concentrations of urea in solution and human blood samples was tested. High peak response current (~5 times than that of the highest reported value), low impedance, rapid sensor fabrication procedure, high selectivity towards urea, excellent linear response (R² = 0.99), high sensitivity of 183 μA mM^-1 cm^-2, the fast response indicated by high diffusion coefficient, the limit of detection of 0.1 µM, tested shelf life of more than 6 months and recovery rate of >99% ensured the application of the developed sensor chip towards PoC urea detection test kit. A PoC device housing an electronic circuitry following the principles of linear sweep voltammetry and compatible with a sensing chip was developed. A maximum percentage error of 4.86% and maximum RSD of 3.63% confirmed the use of the PoC device for rapid urea measurements in human blood.

Facile Detection of Blood Creatinine Using Binary Copper-Iron Oxide and rGO-Based Nanocomposite on 3D Printed Ag-Electrode under POC Settings

Metal nanoparticles have been helpful in creatinine sensing technology under point-of-care (POC) settings because of their excellent electrocatalyst properties. However, the behavior of monometallic nanoparticles as electrochemical creatinine sensors showed limitations concerning the current density in the mA/cm² range and wide detection window, which are essential parameters for the development of a sensor for POC applications. Herein, we report a new sensor, a reduced graphene oxide stabilized binary copper-iron oxide-based nanocomposite on a 3D printed Ag-electrode (Fe-Cu-rGO@Ag) for detecting a wide range of blood creatinine (0.01 to 1000 μM; detection limit 10 nM) in an electrochemical chip with a current density ranging between 0.185 and 1.371 mA/cm² and sensitivity limit of 1.1 μA μM^-1 cm^-2 at physiological pH. Interference studies confirmed that the sensor exhibited no interference from analytes like uric acid, urea, dopamine, and glutathione. The sensor response was also evaluated to detect creatinine in human blood samples with high accuracy in less than a minute. The sensing mechanism suggested that the synergistic effects of Cu and iron oxide nanoparticles played an essential role in the efficient sensing where Fe atoms act as active sites for creatinine oxidation through the secondary amine nitrogen, and Cu nanoparticles acted as an excellent electron-transfer mediator through rGO. The rapid sensor fabrication procedure, mA/cm² peak current density, a wide range of detection limits, low contact resistance including high selectivity, excellent linear response (R² = 0.991), and reusability ensured the application of advanced electrochemical sensor toward the POC creatinine detection.

Electrocatalysts for Using Renewably-Sourced, Organic Electrolytes for Redox Flow Batteries

Biomass could be a source of the redox shuttles that have shown promise for operation as high potential, organic electrolytes for redox flow batteries. There is a sufficient quantity of biomass to satisfy the growing demand to buffer the episodic nature of renewably produced electricity. However, despite a century of effort, it is still not evident how to use existing information from organic electrochemistry to design the electrocatalysts or supporting electrolytes that will confer the required activity, selectivity and longevity. In this research, the use of a fiducial reaction to normalize reaction rates is shown to fail.

A stable organic dye catholyte for long-life aqueous flow batteries

An organic dye, Basic blue 3 (BB3), was reported for the first time as a two-electron catholyte for aqueous redox flow batteries. The exceptional stability of BB3 enabled the full battery to achieve a high capacity retention of >99.991% per cycle during 1500 cycles.

Synthesis, characterization, and electrochemical properties of a first-row metal phthalocyanine series

A first-row metal phthalocyanine series is synthesized and the effects of axial metal-ligand substitution is investigated electrochemically and in the context of charge carriers for redox-flow batteries.