Biomimetic Nacre-Like Silk-Crosslinked Membranes for Osmotic Energy Harvesting

High-performance osmotic energy harvesting enabled by the synergism of space and surface charge in two-dimensional nanofluidic membranes

As promising prospects for renewable power harvesting, two-dimensional (2D) nanochannels for osmotic energy capture in a reverse electrodialysis arrangement have garnered significant attention. However, existing 2D nanochannel membranes have shown limited power generation capabilities due to challenges in balancing ion flux and selectivity. Here, we construct montmorillonite (MMT)/TEMPO-mediated oxidation cellulose nanofibers (TOCNFs) nanocomposite membranes for enhanced ion transmembrane transport. The intercalation of TOCNFs not only enlarges the interlayer distance, but also provides abundant space charge inside the nanochannels. Benefiting from the strong ion selectivity and high ion flux, the composite membrane achieves a remarkable power output of ∼16.57 W/m2 in the gradient of artificial seawater and river water, exceeding that of the state-of-the-art heterogeneous membrane-based osmotic energy conversion systems. Both experimental and theoretical findings confirm that the synergism of space and surface charge plays a crucial role in promoting osmotic energy conversion. This research contributes valuable insights into the optimization of 2D membranes for efficient clean energy harvesting purposes.

Angstrom-Scale 2D Channels Designed For Osmotic Energy Harvesting

Confronting the impending exhaustion of traditional energy, it is urgent to devise and deploy sustainable clean energy alternatives. Osmotic energy contained in the salinity gradient of the sea-river interface is an innovative, abundant, clean, and renewable osmotic energy that has garnered considerable attention in recent years. Inspired by the impressively intelligent ion channels in nature, the developed angstrom-scale 2D channels with simple fabrication process, outstanding design flexibility, and substantial charge density exhibit excellent energy conversion performance, opening up a new era for osmotic energy harvesting. However, this attractive research field remains fraught with numerous challenges, particularly due to the complexities associated with the regulation at angstrom scale. In this review, the latest advancements in the design of angstrom-scale 2D channels are primarily outlined for harvesting osmotic energy. Drawing upon the analytical framework of osmotic power generation mechanisms and the insights gleaned from the biomimetic intelligent devices, the design strategies are highlighted for high-performance angstrom channels in terms of structure, functionalization, and application, with a particular emphasis on ion selectivity and ion transport resistance. Finally, current challenges and future prospects are discussed to anticipate the emergence of more anomalous properties and disruptive technologies that can promote large-scale power generation.

Interfacial Super-Assembly of Vacancy Engineered Ultrathin-Nanosheets Toward Nanochannels for Smart Ion Transport and Salinity Gradient Power Conversion

Ion-selective nanochannel membranes assembled from two-dimensional (2D) nanosheets hold immense promise for power conversion using salinity gradient. However, they face challenges stemming from insufficient surface charge density, which impairs both permselectivity and durability. Herein, we present a novel vacancy-engineered, oxygen-deficient NiCo layered double hydroxide (NiCoLDH)/cellulose nanofibers-wrapped carbon nanotubes (VOLDH/CNF-CNT) composite membrane. This membrane, featuring abundant angstrom-scale, cation-selective nanochannels, is designed and fabricated through a synergistic combination of vacancy engineering and interfacial super-assembly. The composite membrane shows interlayer free-spacing of ~3.62 Å, which validates the membrane size exclusion selectivity. This strategy, validated by DFT calculations and experimental data, improves hydrophilicity and surface charge density, leading to the strong interaction with K+ ions to benefit the low ion transport resistance and exceptional charge selectivity. When employed in an artificial river water|seawater salinity gradient power generator, it delivers a high-power density of 5.35 W/m2 with long-term durability (20,000s), which is almost 400 % higher than that of the pristine NiCoLDH membrane. Furthermore, it displays both pH- and temperature-sensitive ion transport behavior, offering additional opportunities for optimization. This work establishes a basis for high-performance salinity gradient power conversion and underscores the potential of vacancy engineering and super-assembly in customizing 2D nanomaterials for diverse advanced nanofluidic energy devices.

Optimizing Nanofluidic Energy Harvesting in Synthetic Clay-based Membranes by Annealing Treatment

Nanofluidic energy harvesting from salinity gradients is studied in 2D nanomaterials-based membranes with promising performance as high ion selectivity and fast ion transport. In addition, moving forward to scalable, feasible systems requires environmentally friendly materials to make the application sustainable. Clay-based membranes are attractive for being environmentally friendly, non-hazardous, and easy to manipulate materials. However, achieving underwater stability for clay-based membranes remains challenging. In this work, the synthetic clay Laponite is used to prepare clay-based membranes with high stability and excellent performance for osmotic energy harvesting. The Laponite membranes (Lap-membranes) are stabilized by low-temperature annealing treatment to effectively reduce the interlayer space, achieving a continuous operation under salinity gradients. Furthermore, the Lap-membranes conserve integrity while soaking in water for more than one month. The output power density improves from ≈4.97 W m-2 on the pristine membrane to ≈9.89 W m-2 in the membrane treated 12 h at 300 °C from a 30-fold concentration gradient. Especially, It is found that the presence of interlayer water to be favorable for ion transport. Different mechanisms are proposed in the Lap-membranes involved for efficient ion selectivity and the states found with varying annealing temperatures. This work demonstrates the potential application of Laponite based nanomaterials for nanofluidic energy harvesting.

Nanoarchitectonics in Advanced Membranes for Enhanced Osmotic Energy Harvesting

Osmotic energy, often referred to as "blue energy", is the energy generated from the mixing of solutions with different salt concentrations, offering a vast, renewable, and environmentally friendly energy resource. The efficacy of osmotic power production considerably relies on the performance of the transmembrane process, which depends on ionic conductivity and the capability to differentiate between positive and negative ions. Recent advancements have led to the development of membrane materials featuring precisely tailored ion transport nanochannels, enabling high-efficiency osmotic energy harvesting. In this review, ion diffusion in confined nanochannels and the rational design and optimization of membrane architecture are explored. Furthermore, structural optimization of the membrane to mitigate transport resistance and the concentration polarization effect for enhancing osmotic energy harvesting is highlighted. Finally, an outlook on the challenges that lie ahead is provided, and the potential applications of osmotic energy conversion are outlined. This review offers a comprehensive viewpoint on the evolving prospects of osmotic energy conversion.

Advances in Two-Dimensional Ion-Selective Membranes: Bridging Nanoscale Insights to Industrial-Scale Salinity Gradient Energy Harvesting

Salinity gradient energy, often referred to as the Gibbs free energy difference between saltwater and freshwater, is recognized as "blue energy" due to its inherent cleanliness, renewability, and continuous availability. Reverse electrodialysis (RED), relying on ion-selective membranes, stands as one of the most prevalent and promising methods for harnessing salinity gradient energy to generate electricity. Nevertheless, conventional RED membranes face challenges such as insufficient ion selectivity and transport rates and the difficulty of achieving the minimum commercial energy density threshold of 5 W/m2. In contrast, two-dimensional nanostructured materials, featuring nanoscale channels and abundant functional groups, offer a breakthrough by facilitating rapid ion transport and heightened selectivity. This comprehensive review delves into the mechanisms of osmotic power generation within a single nanopore and nanochannel, exploring optimal nanopore dimensions and nanochannel lengths. We subsequently examine the current landscape of power generation using two-dimensional nanostructured materials in laboratory-scale settings across various test areas. Furthermore, we address the notable decline in power density observed as test areas expand and propose essential criteria for the industrialization of two-dimensional ion-selective membranes. The review concludes with a forward-looking perspective, outlining future research directions, including scalable membrane fabrication, enhanced environmental adaptability, and integration into multiple industries. This review aims to bridge the gap between previous laboratory-scale investigations of two-dimensional ion-selective membranes in salinity gradient energy conversion and their potential large-scale industrial applications.

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

All-natural 2D nanofluidics as highly-efficient osmotic energy generators

Two-dimensional nanofluidics based on naturally abundant clay are good candidates for harvesting osmotic energy between the sea and river from the perspective of commercialization and environmental sustainability. However, clay-based nanofluidics outputting long-term considerable osmotic power remains extremely challenging to achieve due to the lack of surface charge and mechanical strength. Here, a two-dimensional all-natural nanofluidic (2D-NNF) is developed as a robust and highly efficient osmotic energy generator based on an interlocking configuration of stacked montmorillonite nanosheets (from natural clay) and their intercalated cellulose nanofibers (from natural wood). The generated nano-confined interlamellar channels with abundant surface and space negative charges facilitate selective and fast hopping transport of cations in the 2D-NNF. This contributes to an osmotic power output of ~8.61 W m-2 by mixing artificial seawater and river water, higher than other reported state-of-the-art 2D nanofluidics. According to detailed life cycle assessments (LCA), the 2D-NNF demonstrates great advantages in resource consumption (1/14), greenhouse gas emissions (1/9), and production costs (1/13) compared with the mainstream 2D nanofluidics, promising good sustainability for large-scale and highly-efficient osmotic power generation.

Preparation of photoluminescent nano-biocomposite nacre from graphene oxide and polylactic acid

Nano-biocomposites of inorganic and organic components wereprepared to produce long-persistent phosphorescent artificial nacre-like materials. Biodegradable polylactic acid (PLA), graphene oxide (GO), and nanoparticles (13-20 nm) of lanthanide-doped aluminate pigment (NLAP) were used in a simple production procedure of an organic/inorganic hybrid nano-biocomposite. Both polylactic acid and GO nanosheets were chemically modified to form covalent and hydrogen bonding. The high toughness, good tensile strength, and great endurance of those bonds were achieved by their interactions at the interfaces. Long-persistent and reversible photoluminescence was shown by the prepared nacre substrates. Upon excitation at 365 nm, the nacre substrates generated an emission peak at 517 nm. When ultraviolet light was shone on luminescent nacres, they displayed a bright green colour. The high superhydrophobicity of the generated nacres was obtained without altering their mechanical characteristics.

Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion

The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.

2D Ordered Mesoporous Lamellar Hetero-Nanochannels with Asymmetric Wettability for Controllable Ion Transport

Heterogeneous membranes play a crucial role in osmotic energy conversion by effectively reducing concentration polarization. However, most heterogeneous membranes mitigate concentration polarization through an asymmetric charge distribution, resulting in compromised ion selectivity. Herein, hetero-nanochannels with asymmetric wettability composed of 2D mesoporous carbon and graphene oxide are constructed. The asymmetric wettability of the membrane endows it with the ability to suppress the concentration polarization without degrading the ion selectivity, as well as achieving a diode-like ion transport feature. As a result, enhanced osmotic energy harvesting is achieved with a power density of 6.41 W m-2 . This represents a substantial enhancement of 102.80-137.85% when compared to homogeneous 2D membranes, surpassing the performance of the majority of reported 2D membranes. Importantly, the membrane can be further used for high-performance ionic power harvesting by regulating ion transport, exceeding previously reported data by 89.1%.

Enhanced Selective Ion Transport in Highly Charged Bacterial Cellulose/Boron Nitride Composite Membranes for Thermo-Osmotic Energy Harvesting

Significant untapped energy exists within low-grade heat sources and salinity gradients. Traditional nanofluidic membranes exhibit inherent limitations, including low ion selectivity, high internal resistance, reliance on nonrenewable resources, and instability in aqueous solutions, invariably constraining their practical application. Here, an innovative composite membrane-based nanofluidic system is reported, involving the strategy of integrating tailor-modified bacterial nanofibers with boron nitride nanosheets, enabling high surface charge densities while maintaining a delicate balance between ion selectivity and permeability, ultimately facilitating effective thermo-osmotic energy harvesting. The device exhibits an impressive output power density of 10 W m-2 with artificial seawater and river water at a 50 K temperature gradient. Furthermore, it demonstrates robust power density stability under prolonged exposure to salinity gradients or even at elevated temperatures. This work opens new avenues for the development of nanofluidic systems utilizing composite materials and presents promising solutions for low-grade heat recovery and osmotic energy harvesting.

Unlocking osmotic energy harvesting potential in challenging real-world hypersaline environments through vermiculite-based hetero-nanochannels

Nanochannel membranes have demonstrated remarkable potential for osmotic energy harvesting; however, their efficiency in practical high-salinity systems is hindered by reduced ion selectivity. Here, we propose a dual-separation transport strategy by constructing a two-dimensional (2D) vermiculite (VMT)-based heterogeneous nanofluidic system via an eco-friendly and scalable method. The cations are initially separated and enriched in micropores of substrates during the transmembrane diffusion, followed by secondary precise sieving in ultra-thin VMT laminates with high ion flux. Resultantly, our nanofluidic system demonstrates efficient osmotic energy harvesting performance, especially in hypersaline environment. Notably, we achieve a maximum power density of 33.76 W m-2, a 6.2-fold improvement with a ten-fold increase in salinity gradient, surpassing state-of-the-art nanochannel membranes under challenging conditions. Additionally, we confirm practical hypersaline osmotic power generation using various natural salt-lake brines, achieving a power density of 25.9 W m-2. This work triggers the hopes for practical blue energy conversion using advanced nanoarchitecture.

Preanchoring Enabled Directional Modification of Atomically Thin Membrane for High-Performance Osmotic Energy Generation

Salinity gradient energy is an environmentally friendly energy source that possesses potential to meet the growing global energy demand. Although covalently modified nanoporous graphene membranes are prospective candidates to break the trade-off between ion selectivity and permeability, the random reaction sites and inevitable defects during modification reduce the reaction efficiency and energy conversion performance. Here, we developed a preanchoring method to achieve directional modification near the graphene nanopores periphery. Numerical simulation revealed that the improved surface charge density around nanopores results in exceptional K+/Cl- selectivity and osmotic energy conversion performance, which agreed well with experimental results. Ionic transport measurements showed that the directionally modified graphene membranes achieved an outstanding power density of 81.6 W m-2 with an energy conversion efficiency of 35.4% under a 100-fold salinity gradient, outperforming state-of-the-art graphene-based nanoporous membranes. This work provided a facile approach for precise modification of nanoporous graphene membranes and opened up new ways for osmotic power harvesting.

Asymmetric Nanoporous Alumina Membranes for Nanofluidic Osmotic Energy Conversion

The potential of harnessing osmotic energy from the interaction between seawater and river water has been recognized as a promising, eco-friendly, renewable, and sustainable source of power. The reverse electrodialysis (RED) technology has gained significant interest for its ability to generate electricity by combining concentrated and diluted streams with different levels of salinity. Nanofluidic membranes with tailored ion transport dynamics enable efficient harvesting of renewable osmotic energy. In this regard, anodic aluminum oxide (AAO) membranes with abundant nanochannels provide a cost-effective nanofluidic platform to obtain structures with a high density of ordered pores. AAO can be utilized in constructing asymmetric composite membranes with enhanced ion flux and selectivity to improve output power generation. In this review, we first present the fundamental structure and properties of AAO, followed by summarizing the fabrication techniques for asymmetric membranes using AAO and other nanostructured materials. Subsequently, we discuss the materials employed in constructing asymmetric structures incorporating AAO while emphasizing how material selection and design can resist and promote efficient energy conversion. Finally, we provide an outlook on future applications and address the challenges that need to be overcome for successful osmotic energy conversion.

Photoelectric responsive ionic channel for sustainable energy harvesting

Access to sustainable energy is paramount in today's world, with a significant emphasis on solar and water-based energy sources. Herein, we develop photo-responsive ionic dye-sensitized covalent organic framework membranes. These innovative membranes are designed to significantly enhance selective ion transport by exploiting the intricate interplay between photons, electrons, and ions. The nanofluidic devices engineered in our study showcase exceptional cation conductivity. Additionally, they can adeptly convert light into electrical signals due to photoexcitation-triggered ion movement. Combining the effects of salinity gradients with photo-induced ion movement, the efficiency of these devices is notably amplified. Specifically, under a salinity differential of 0.5/0.01 M NaCl and light exposure, the device reaches a peak power density of 129 W m-2, outperforming the current market standard by approximately 26-fold. Beyond introducing the idea of photoelectric activity in ionic membranes, our research highlights a potential pathway to cater to the escalating global energy needs.

Room-Temperature Synthesis of a COFs Membrane Via LBL Self-Assembly Strategy for Energy Harvesting

The covalent organic frameworks (COFs) membrane with ordered and confined one-dimensional channel has been considered as a promising material to harvest the salinity gradient energy from the seawater and river water. However, the application of the COFs in the field of energy conversion still faces the challenges in membrane preparation. Herein, energy harvesting is achieved by taking advantage of a COFs membrane where TpDB-HPAN is synthesized via layer-by-layer self-assembly strategy at room temperature. The carboxy-rich TpDB COFs can be expediently assembled onto the substrate with an environmental-friendly method. The increased open-circuit voltage (Voc ) endows TpDB-HPAN membrane with a remarkable energy harvesting performance. More importantly, the application perspective is also illuminated by the cascade system. With the advantages of green synthesis, the TpDB-HPAN membrane can be considered as a low-cost and promising candidate for energy conversion.

Meta-Aerogel Ion Motor for Nanofluid Osmotic Energy Harvesting

Osmotic power, also known as "blue energy", is a vast, sustainable, and clean energy source that can be directly converted into electricity by nanofluidic membranes. However, the key technological bottleneck for large-scale osmotic electricity is that macroscopic-scale bulky membrane cannot synergistically satisfy the demands of high power density and low resistance without sacrificing scalability and mechanical robustness. Here, inspired by the anatomy and working principle of electric eels, which harness osmotic energy through embedded neuron-mediated fibril nanochannels with nanoconfined transport dynamics. Fibrous nanofluidic meta-aerogel ion motors, 3D-assembled from nanofluidic cable fibers with actuatable stimulation/transport "ion highways" are engineered. The meta-aerogel exhibits the integrated coupling effect of boosted ion propulsion and surface-charge-dominated selective ion transport. Driven by osmosis, the meta-aerogel ion motor can produce an unprecedented output power density of up to 30.7 W m-2 under a 50-fold salinity gradient. Advancing ultra-selective ion transport in nanofluidic meta-aerogels may provide a promising roadmap for blue energy harvesting.

Confined Ionic-Liquid-Mediated Cation Diffusion through Layered Membranes for High-Performance Osmotic Energy Conversion

Ion-selective membranes act as the core components in osmotic energy harvesting, but remain with deficiencies such as low ion selectivity and a tendency to swell. 2D nanofluidic membranes as competitive candidates are still subjected to limited mass transport brought by insufficient wetting and poor stability in water. Here, an ionic-liquid-infused graphene oxide (GO@IL) membrane with ultrafast ion transport ability is reported, and how the confined ionic liquid mediates selective cation diffusion is revealed. The infusion of ionic liquids endows the 2D membrane with excellent mechanical strength, anti-swelling properties, and good stability in aqueous electrolytes. Importantly, immiscible ionic liquids also provide a medium, allowing partial dehydration for ultrafast ion transport. Through molecular dynamics simulation and finite element modeling, that GO nanosheets induce ionic liquids to rearrange, bringing in additional space charges, which can be coupled with GO synergistically, is proved. By mixing 0.5/0.01 m NaCl solution, the power density can achieve a record value of ≈6.7 W m^-2 , outperforming state-of-art GO-based membranes. This work opens up a new route for boosting nanofluidic energy conversion because of the diversity of the ILs and 2D materials.

Horizontally Asymmetric Nanochannels of Graphene Oxide Membranes for Efficient Osmotic Energy Harvesting

Reverse electrodialysis (RED) directly harvests renewable energy from salinity gradients, and the achievable potential power heavily relies on the ion exchange membranes. Graphene oxides (GOs) are considered a solid candidate for the RED membrane because the laminated GO nanochannels with charged functional groups provide an excellent ionic selectivity and conductivity. Yet, a high internal resistance and poor stability in aqueous solutions limit the RED performance. Here, we develop a RED membrane that concurrently achieves high ion permeability and stable operation based on epoxy-confined GO nanochannels with asymmetric structures. The membrane is fabricated by reacting epoxy-wrapped GO membranes with ethylene diamine via vapor diffusion, overcoming the swelling properties in aqueous solutions. More importantly, the resultant membrane exhibits asymmetric GO nanochannels in terms of both channel geometry and electrostatic surface charges, leading to the rectified ion transport behavior. The demonstrated GO membrane exhibits the RED performance up to 5.32 W·m^-2 with >40% energy conversion efficiency across a 50-fold salinity gradient and 20.3 W·m^-2 across a 500-fold salinity gradient. Planck-Nernst continuum models coupled to molecular dynamics simulations rationalize the improved RED performance in terms of the asymmetric ionic concentration gradient within the GO nanochannel and the ionic resistance. The multiscale model also provides the design guidelines for ionic diode-type membranes configuring the optimum surface charge density and ionic diffusivity for efficient osmotic energy harvesting. The synthesized asymmetric nanochannels and their RED performance demonstrate the nanoscale tailoring of the membrane properties, establishing the potentials for 2D material-based asymmetric membranes.

Electrodeposited MOFs Membrane with In Situ Incorporation of Charged Molecules for Osmotic Energy Harvesting

Ion-selective membranes are considered as the promising candidates for osmotic energy harvesting. However, the fabrication of highly perm-selective membrane is the major challenge. Metal-organic frameworks (MOFs) with well-defined nanochannels along functional charged groups show great importance to tackle this problem. Here, a series of dense sodium polystyrene sulfonate (PSS) incorporated MOFs composite membranes (PSS@MOFs) on a porous anodic aluminum oxide (AAO) membrane via in situ anodic electrodeposition process are developed. Benefiting to the novel structural design of the confined Ag layer, PSS@MOFs dense composite membrane with less defects formed. The sulfonated nanochannels of the PSS@MOFs composite membrane provided rapid and selective transport of cations due to the enhanced electrostatic interaction between the permeating ions and MOFs. While osmotic energy conversion, 860 nm thick negatively charged PSS@MOFs composite membrane achieves an ultrahigh cation transfer number of 0.993 and energy conversion efficiency of 48.8% at a 100-fold salinity gradient. Moreover, a large output power of 2.90 µW has been achieved with an ultra-low internal resistance of 999 Ω, employing an effective area of 12.56 mm² . This work presents a promising strategy to construct a high-performance MOFs-based osmotic energy harvesting system for practical applications.

Molecular Orientation-Regulated Bioinspired Multilayer Composites with Largely Enhanced Mechanical Properties

Natural nacre's hierarchical brick-and-mortar architecture motivates intensive studies on inorganic platelet/polymer multilayer composites, targeting mechanical property enhancement only by two strategies: optimizing the size and alignment of inorganic platelets and improving the interfacial interaction between inorganic platelets and polymers. Herein, a new strategy of polymer chain orientation to enhance the property of bioinspired multilayered composites is presented, which facilitates more stress to be transferred from polymer layers to inorganic platelets by simultaneous stiffening of multiple polymer chains. To this end, bioinspired multilayer films consisting of oriented sodium carboxymethyl cellulose chains and alumina platelets are designed and fabricated by three successive steps of water evaporation-induced gelation in glycerol, high-ratio prestretching, and Cu²⁺ infiltration. Regulating the orientation state of sodium carboxymethyl cellulose leads to a large enhancement of mechanical properties, including Young's modulus (2.3 times), tensile strength (3.2 times), and toughness (2.5 times). It is observed experimentally and predicted theoretically that the increased chain orientation induces failure mode transition in the multilayered films from alumina platelet pull-out to alumina platelet fracture because more stress is transferred to the platelets. This strategy opens an avenue toward rational design and manipulation of polymer aggregation states in inorganic platelet/polymer multilayer composites and allows a highly effective increase in modulus, strength, and toughness.

Vacancy Engineering for High-Efficiency Nanofluidic Osmotic Energy Generation

Two-dimensional (2D) nanofluidic membranes have shown great promise in harvesting osmotic energy from the salinity difference between seawater and fresh water. However, the output power densities are strongly hampered by insufficient membrane permselectivity. Herein, we demonstrate that vacancy engineering is an effective strategy to enhance the permselectivity of 2D nanofluidic membranes to achieve high-efficiency osmotic energy generation. Phosphorus vacancies were facilely created on NbOPO₄ (NbP) nanosheets, which remarkably enlarged their negative surface charge. As verified by both experimental and theoretical investigations, the vacancy-introduced NbP (V-NbP) exhibited fast transmembrane ion migration and high ionic selectivity originating from the improved electrostatic affinity of cations. When applied in a natural river water|seawater osmotic power generator, the macroscopic-scale V-NbP membrane delivered a record-high power density of 10.7 W m^-2, far exceeding the commercial benchmark of 5.0 W m^-2. This work endows the remarkable potential of vacancy engineering for 2D materials in nanofluidic energy devices.

Selective Ion Transport in Two-Dimensional Lamellar Nanochannel Membranes

Precise and ultrafast ion sieving is highly desirable for many applications in environment-, energy-, and resource-related fields. The development of a permselective lamellar membrane constructed from parallel stacked two-dimensional (2D) nanosheets opened a new avenue for the development of next-generation separation technology because of the unprecedented diversity of the designable interior nanochannels. In this Review, we first discuss the construction of homo- and heterolaminar nanoarchitectures from the starting materials to the emerging preparation strategies. We then explore the property-performance relationships, with a particular emphasis on the effects of physical structural features, chemical properties, and external environment stimuli on ion transport behavior under nanoconfinement. We also present existing and potential applications of 2D membranes in desalination, ion recovery, and energy conversion. Finally, we discuss the challenges and outline research directions in this promising field.

Tunable Ion Transport in Two-Dimensional Nanofluidic Channels

Layered two-dimensional (2D) materials with interlayer channels at the nanometer scale offer an ideal platform to control ion transport behaviors, including high-precision separation, ultrafast diffusion, and tunable permeation flux, which show great potential for energy conversion and storage, water treatment, catalysis, biosynthesis, and sensing. Recent advances in controlling the structure and functionality of 2D nanofluidic channels sustainably open doors for more revolutionary applications. In this Perspective, we first present a brief introduction to the fundamental mechanisms for ion transport in 2D nanofluidic channels and an overview of state-of-the-art assembly technologies of nanochannel membranes. We then point out new avenues for developing advanced nanofluidics, combining molecular-level cross-linking, and surface modification in nanoconfinement. Finally, we outline the potential applications of these 2D nanofluidic channel membranes and their technical challenges that need to be addressed to afford for practical applications.

Two-Dimensional Membranes with Highly Charged Nanochannels for Osmotic Energy Conversion

Inadequate mass transportation of semipermeable membranes causes poor osmotic energy conversion from salinity-gradient. Here, the lamellar graphene oxide membranes (GOMs) constructed with numerous fusiform-like nanochannels, that are pre-filled with negatively charged polyanion electrolytes, to both enhance the ion permeability and ion selectivity of the membrane for energy harvest from the salinty gradient, were developed. The as-prepared membrane achieved the maximum output power density of ∼4.94 W m^-2 under a 50 fold salinity gradient, which is 3.5 fold higher than that of pristine GOM. The enhancement could be ascribed to the synergistic impact of the expanded nanochannels and the enhanced space charge density. Via feeding with the artificial salinity water and monovalent cation electrolytes, the system could realise the power output up to 14.7 W m^-2 and 34.1 W m^-2 , respectively. Overall, this material design strategy could provide an alternative concept to effectively enhance ion transport of other two-dimensional (2D) membranes for specific purposes.

Ultrathin and Ultrastrong Kevlar Aramid Nanofiber Membranes for Highly Stable Osmotic Energy Conversion

An ion-selective membrane can directly convert the osmotic energy to electricity through reverse electrodialysis. However, developing an advanced membrane that simultaneously possesses high power density, excellent mechanical strength, and convenient large-scale production for practical osmotic energy conversion, remains challenging. Here, the fabrication of ultrathin and ultrastrong Kevlar aramid nanofiber (KANF) membranes with interconnected three-dimensional (3D) nanofluidic channels via a simple blade coating method is reported. The negatively charged 3D nanochannels show typical surface-charge-governed nanofluidic ion transport and exhibit excellent cation selectivity. When applied to osmotic energy conversion, the power density of the KANF membrane-based generator reaches 4.8 W m^-2 (seawater/river water) and can be further increased to 13.8 W m^-2 at 328 K, which are higher than most of the state-of-the-art membranes. Importantly, a 4-µm-thickness KANF membrane shows ultrahigh tensile strength (565 MPa) and Young's modulus (25 GPa). This generator also exhibits ultralong stability over 120 days, showing great potential in practical energy conversions.

Electronic-Level Insight into Interfacial Effects and Their Induced Anisotropic Ion Diffusion and Ion Selectivity in Nanochannels

Osmotic energy conversion features directional ion migration in selective nanochannels, dominated by interfacial effects, temperature, and concentration. Current efforts emphasize membrane modification for superior reliability and durability, whereas the origin and implication of interfacial effects are unclear. This work performs ab initio molecular dynamics simulations for hydrated ion-graphene oxide interfaces by regulating the temperature and concentration. The interfacial effects associated with their induced anisotropic ion diffusion and ion selectivity are revealed. The scientific essence of the interfacial effects is an electron transfer triggered by hydrated ion-functional group interactions. The interfacial effects are clarified to include dynamic solvation structures, interfacial H-bonds, and chemical reactions. Ions possess incomplete hydration shells, and their arrangements vary from ordered to disordered to overlapped. Interfacial H-bonds restrict hydrated ions by constraining water molecules, whereas continuous reactions provide lateral pathways to generate anisotropy. Cation selectivity is further clarified by negative surface charges from hydroxyl deprotonation. Besides, temperature rise induces disordered hydrated ions as well as frequent and violent reactions, enhancing ion diffusion, selectivity, and anisotropy; excessive concentrations produce overlapped hydrated ions, more H-bonds, and inferior reactions, weakening ion diffusion, selectivity, and anisotropy. Finally, the bottom-up concept for osmotic energy conversion is summarized, and elevated temperature combined with low concentration is found to boost ion diffusion and ion selectivity synergistically. This work provides an in-depth understanding of interfacial phenomena and ion behaviors in nanochannels.

A Euryhaline-Fish-Inspired Salinity Self-Adaptive Nanofluidic Diode Leads to High-Performance Blue Energy Harvesters

The adaptability to wide salinities remains a big challenge for artificial nanofluidic systems, which plays a vital role in water-energy nexus science. Here, inspired by euryhaline fish, sandwich-structured nanochannel systems are constructed to realize salinity self-adaptive nanofluidic diodes, which lead to high-performance salinity-gradient power generators with low internal resistance. Adaptive to changing salinity, the pore morphology of one side of the nanochannel system switches from a 1D straight nanochannel (45 nm) to 3D network pores (1.9 nm pore size and ≈10¹³ pore density), along with three orders of magnitude change for charge density. Thus, the abundant surface charges and narrow pores render the membrane-based osmotic power generator with power density up to 26.22 Wm^-2 . The salinity-adaptive membrane solves the surface charge-shielding problem caused by abundant mobile ions in high salinity and increases the overlapping degree of the electric double layer. The dynamic adaption process of the membrane to the hypersaline environment endows it with good salt endurance and stability. New routes for designing nanofluidic devices functionally adaptable to different salinities and building power generators with excellent salt endurance are demonstrated.

Boosting Osmotic Energy Conversion of Graphene Oxide Membranes via Self-Exfoliation Behavior in Nano-Confinement Spaces

Introducing alien intercalations to sub-nanometer scale nanochannels is one desirable strategy to optimize the ion transportation of two-dimensional nanomaterial membranes for improving osmotic energy harvest (OEH). Diverse intercalating agents have been previously utilized to realize this goal in OEH, but with modest performance, complex operations, and physicochemical uncertainty gain. Here, we employ the self-exfoliation behavior of oxidative fragments (OFs) from graphene oxide basal plane under an alkaline environment to encapsulate detached OFs in nanochannels for breaking a trade-off between permeability and selectivity, boosting power density from 1.8 to 4.9 W m^-2 with a cation selectivity of 0.9 and revealing a negligible decline in power density and trade-off during a long-term operation test (∼168 h). The strategy of membrane design, employing the intrinsically self-exfoliated OFs to decorate the nanochannels, provides an alternative and facile approach for ion separation, OEH, and other nano-fluidic applications.

Cation-selective two-dimensional polyimine membranes for high-performance osmotic energy conversion

Two-dimensional (2D) membranes are emerging candidates for osmotic energy conversion. However, the trade-off between ion selectivity and conductivity remains the key bottleneck. Here we demonstrate a fully crystalline imine-based 2D polymer (2DPI) membrane capable of combining excellent ionic conductivity and high selectivity for osmotic energy conversion. The 2DPI can preferentially transport cations with Na⁺ selectivity coefficient of 0.98 (Na⁺/Cl^- selectivity ratio ~84) and K⁺ selectivity coefficient of 0.93 (K⁺/Cl^- ratio ~29). Moreover, the nanometer-scale thickness (~70 nm) generates a substantially high ionic flux, contributing to a record power density of up to ~53 W m^-2, which is superior to most of nanoporous 2D membranes (0.8~35 W m^-2). Density functional theory unveils that the oxygen and imine nitrogen can both function as the active sites depending on the ionization state of hydroxyl groups, and the enhanced interaction of Na⁺ versus K⁺ with 2DPI plays a significant role in directing the ion selectivity.

High-Performance Osmotic Power Generators Based on the 1D/2D Hybrid Nanochannel System

Extracting clean energy by converting the salinity gradient between river and sea into energy is an effective way to reduce the global pollution and carbon emissions. Reverse electrodialysis (RED) is of great importance to realize the energy conversion assisting the ion-selective membrane. However, its higher ion resistance and lower conversion efficiency results in the undesirable power conversion performance. Here, we demonstrate a 1D/2D hybrid nanochannel system to achieve high osmotic energy conversion and output power. This heterogeneous structure is composed of two structures, in which the subnanometer nanochannels in graphene oxide membrane (GOM) can serve as a selective layer and reduce the ion diffusion energy barrier, while the nanochannel in the polymer can introduce asymmetry to enhance ionic rectification and conversion efficiency. This heterogeneous membrane exhibits excellent cation selectivity and enhanced ionic current rectification (ICR) performance. The application of the GOM/PET hybrid nanochannel system in osmotic energy harvesting is evaluated, and the output power can reach up to 118.2 pW with the energy conversion efficiency of 40.3%. Theoretical calculation indicates that the 1D/2D hybrid system can effectively take the advantage of excellent cation selectivity of 2D lamellar nanochannels to improve its RED performance significantly.

Giant Osmotic Energy Conversion through Vertical-Aligned Ion-Permselective Nanochannels in Covalent Organic Framework Membranes

Nanofluidic membranes have been demonstrated as promising candidates for osmotic energy harvesting. However, it remains a long-standing challenge to fabricate high-efficiency ion-permselective membranes with well-defined channel architectures. Here, we demonstrate high-performance osmotic energy conversion membranes based on oriented two-dimensional covalent organic frameworks (COFs) with ultrashort vertically aligned nanofluidic channels that enabled efficient and selective ion transport. Experiments combined with molecular dynamics simulations revealed that exquisite control over channel orientation, charge polarity, and charge density contributed to high ion selectivity and permeability. When applied to osmotic energy conversion, a pair of 100 nm thick oppositely charged COF membranes achieved an ultrahigh output power density of 43.2 W m^-2 at a 50-fold salinity gradient and up to 228.9 W m^-2 for the Dead Sea and river water system. The achieved power density outperforms the state-of-the-art nanofluidic membranes, suggesting the great potential of oriented COF membranes in the fields of advanced membrane technology and energy conversion.

Effective Charged Exterior Surfaces for Enhanced Ionic Diffusion through Nanopores under Salt Gradients

High-performance osmotic energy conversion requires both large ionic throughput and high ionic selectivity, which can be significantly promoted by exterior surface charges simultaneously, especially for short nanopores. Here, we investigate the enhancement of ionic diffusion by charged exterior surfaces under various conditions and explore corresponding effective charged areas. From simulations, ionic diffusion is promoted more significantly by exterior surface charges through nanopores with a shorter length, wider diameter, and larger surface charge density or under higher salt gradients. Effective widths of the charged ring regions near nanopores are reversely proportional to the pore length and linearly dependent on the pore diameter, salt gradient, and surface charge density. Due to the important role of effective charged areas in the propagation of ionic diffusion through single nanopores to cases with porous membranes, our results may provide useful guidance to the design and fabrication of porous membranes for practical high-performance osmotic energy harvesting.

Seawater-Boosting Surface-Initiated Atom Transfer Radical Polymerization for Functional Polymer Brush Engineering

Iron-mediated surface-initiated reversible deactivation radical polymerization (Fe⁰ SI-RDRP) is an appealing approach to produce robust polymer surfaces with low toxicity and biocompatibility, while its application has been limited so far due to the poor activity of iron-based catalysts. Herein, we show that the iron(0)-mediated surface-initiated atom transfer radical polymerization (Fe⁰ SI-ATRP) could be significantly enhanced by simply using seawater as reaction media. In comparison, there was no polymer brush formation in deionized water. This method could convert a range of monomers to well-defined polymer brushes with unparalleled speed (up to 31.5 nm min^-1) and a minor amount of monomer consumption (μL). Moreover, the resultant polymer brush shows chain-end fidelity which could be exemplified by repetitive Fe⁰ SI-ATRP to obtain tetrablock brushes. Finally, we show the preparation of polymer-brush-gated ion-selective membranes by Fe⁰ SI-ATRP for osmotic energy conversion, which gives excellent power densities of 5.93 W m^-2, outperforming the most reported as well as commercialized benchmark (5 W m^-2).

Bioinspired Ultrastable MXene/PEDOT:PSS Layered Membrane for Effective Salinity Gradient Energy Harvesting from Organic Solvents

The waste organic solvents containing inorganic salts have been considered sustainable resources, which can effectively capture salinity gradient energy using ion-selective membranes. However, it still remains a great challenge to fabricate the ion-selective membranes with high conversion efficiency and stability in an organic system. Here, the bioinspired nacre-like layered MXene/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) (MP) composite membranes for capturing salinity gradient energy from an organic solvent are fabricated via filtration method, in which PEDOT:PSS molecules are introduced into MXene interlayers. Accordingly, the MP membrane exhibits high mechanical property and wonderful stability in common organic solvents. As expected, the power generation of the MP membrane reaches up to 3216 ± 603 nW in a 2/0.001 M methanol (Met)-LiCl solution and a record high power generation of 6926 ± 959 nW after adding NaOH into the Met-LiCl solution, which is superior to the previous report. Both experimental and theoretical studies confirm that the MP membrane has excellent cation selectivity and fast ion transport performance. The results are attributable to an increased interlayer spacing between MXene layers and an improved cation selectivity due to the insertion of PEDOT:PSS chains and the enhanced dissociation of negative charges by NaOH. The ultrastable two-dimensional (2D) nanochannel membrane provides practical application for harvesting energy from waste organic solvents.

Bio-Inspired Salinity-Gradient Power Generation With UiO-66-NH2 Metal-Organic Framework Based Composite Membrane

Salinity-gradient directed osmotic energy between seawater and river water has been widely considered as a promising clean and renewable energy source, as there are numerous river estuaries on our planet. In the past few decades, reverse electrodialysis (RED) technique based on cation-selective membranes has been used as the key strategy to convert osmotic energy into electricity. From this aspect, developing high-efficiency anion-selective membranes will also have great potential for capturing osmotic energy, however, remains systematically unexplored. In nature, electric eels can produce electricity from ionic gradients by using their “sub-nanoscale” protein ion channels to transport ions selectively. Inspired by this, here we developed a UiO-66-NH₂ metal-organic framework (MOF) based anion-selective composite membrane with sub-nanochannels, and achieved high-performance salinity-gradient power generation by mixing artificial seawater (0.5 M NaCl) and river water (0.01 M NaCl). The UiO-66-NH₂ metal-organic framework based composite membranes can be easily and economically fabricated with dense structure and long-term working stability in saline, and its performance of power generation can also be adjusted by pH to enhance the surface charge density of the MOF sub-nanochannels. This study will inspire the exploitation of MOFs for investigating the sub-nanochannel directed high-performance salinity-gradient energy harvesting systems based on anion-selective ion transport.

Biomimetic Nanochannels: From Fabrication Principles to Theoretical Insights

Biological nanochannels which can regulate ionic transport across cell membranes intelligently play a significant role in physiological functions. Inspired by these nanochannels, numerous artificial nanochannels have been developed during recent years. The exploration of smart solid-state nanochannels can lay a solid foundation, not only for fundamental studies of biological systems but also practical applications in various fields. The basic fabrication principles, functional materials, and diverse applications based on artificial nanochannels are summarized in this review. In addition, theoretical insights into transport mechanisms and structure-function relationships are discussed. Meanwhile, it is believed that improvements will be made via computer-guided strategy in designing more efficient devices with upgrading accuracy. Finally, some remaining challenges and perspectives for developments in both novel conceptions and technology of this inspiring research field are stated.

Engineered Cellulose Nanofiber Membranes with Ultrathin Low-Dimensional Carbon Material Layers for Photothermal-Enhanced Osmotic Energy Conversion

As a promising clean energy source, membrane-based osmotic energy harvesting has been widely investigated and developed through optimizing the membrane structure in recent years. For chasing higher energy conversion performance, various external stimuli have been introduced into the osmotic energy harvesting systems as assistant factors. Light as a renewable and well-tunable energy form has drawn great attention. Normally, it needs massive photoresponsive materials for improving the energy conversion performance and this hinders its wide applications. Herein, we fabricate a cellulose nanofiber (CNF) membrane with an ultrathin layer of low-dimensional carbon materials (LDCMs) for photothermal-enhanced osmotic energy conversion. The ultralow loading carbon quantum dot, carbon nanotube, and graphene oxide (LDCM/CNF = 1:200 wt) are used for light-to-heat conversion to build the heat gradient across the membrane. The output power density of the osmotic energy generator has increased from ∼3.55 to ∼7.67 W/m² under a 50-fold concentration gradient with light irradiation. This work shows the great potential of the CNF as a nanofluidic platform and the photothermal enhancement in osmotic energy conversion, and the ultralow loading design provides a practical and economical way to fully utilize other energy resources for enhancing osmotic energy conversion.

Silk-based bioinspired structural and functional materials

Natural biological materials provide a rich source of inspiration for building high-performance materials with extensive applications. By mimicking their chemical compositions and hierarchical architectures, the past decades have witnessed the rapid development of bioinspired materials. As a very promising biosourced raw material, silk is drawing increasing attention due to excellent mechanical properties, favorable versatility, and good biocompatibility. In this review, we provide an overview of the recent progress in silk-based bioinspired structural and functional materials. We first give a brief introduction of silk, covering its sources, features, extraction, and forms. We then summarize the preparation and application of silk-based materials mimicking four typical biological materials including bone, nacre, skin, and polar bear hair. Finally, we discuss the current challenges and future prospects of this field.

Super-assembly of freestanding graphene oxide-aramid fiber membrane with T-mode subnanochannels for sensitive ion transport

Biomimetic nacre-like membranes composed of two-dimensional lamellar sheets and one-dimensional nanofibers exhibit high mechanical strength and excellent stability. Thus, they show substantial application in the field of membrane science and water purification. However, the limited techniques for the assembly of two-dimensional lamellar membranes and one-dimensional nanofibers hamper their development and application. Herein, we developed a nacre-like and freestanding graphene oxide/aramid fiber membrane with abundant T-mode subnanochannels by introducing aramid fibers into graphene oxide interlamination via the super-assembly interaction between graphene oxide and aramid fibers. Benefiting from the presence of stable and adjustable sub-nanometer-size ion transport channels, the graphene oxide/aramid fiber composite membrane exhibited excellent mono/divalent ion selectivity of 3.51 (K⁺/Mg²⁺), which is superior to that of the pure graphene oxide membrane. The experimental results suggest that the mono/divalent ion selectivity is ascribed to the subnanochannels in the graphene oxide/aramid fiber composite membrane, electrostatic repulsion interaction and strong interaction between the divalent metal ion and carboxyl groups. Moreover, the composite membrane exhibited remarkable charge selectivity with a K⁺/Cl^- ratio of up to ∼158, indicating that this graphene oxide/aramid fiber composite membrane has great potential for application in energy conversion. This study provides an avenue to prepare freestanding and nacre-like composite membranes with abundant T-mode ion transport channels for ion recognition and energy conversion, which also shows great application prospects in the field of membrane science and water purification.

Anion-Selective Layered Double Hydroxide Composites-Based Osmotic Energy Conversion for Real-Time Nutrient Solution Detection

Nanofluidic channels based on 2D nanomaterials are promising to harvest osmotic energy for their high ion selectivity and osmotic conductivity. However, anion-selective nanofluidic channels are rare and chemical modification is necessary through fabrication. Here, a naturally anion-selective composite membrane is reported, that is, NiAl-Layered double hydroxide (LDH) coated anodic aluminum oxide (LDH@AAO), using a simple precipitant-free in situ growth technique. Positively charged LDH plates growing in channels of AAO function as screening layers for anions. Both experiments and theoretical simulations are enforced to certify the vital role of LDH growth in ion distribution and salinity gradient energy conversion. The composite membrane achieves high output performance and long-term stability. Furthermore, novel applications of nanofluidic channels are explored in hydroponic production and design a real-time detecting system based on LDH@AAO composite membranes for nutrient solution. This work provides insights into naturally anion-selective nanofluidic channels for osmotic energy harvesting and broadens the application in agricultural information sensing.

Ionic Crosslinking-Induced Nanochannels: Nanophase Separation for Ion Transport Promotion

Charge-governed ion transport is crucial to numerous industries, and the advanced membrane is the essential component. In nature, the efficient and selective ion transport is mainly governed by the charged ion channels located in cell membrane, indicating the architecture with functional differentiation. Inspired by this architecture, a membrane by ionic crosslinking sulfonated poly(arylene ether ketone) and imidazolium-functionalized poly(arylene ether sulfone) is designed and fabricated to make full use of the charges. This ionic crosslinking is designed to realize nanophase separation to aggregate the ion pathways in the membrane, which results in excellent ion selectivity and high ion conductivity. With the excellent ion transport behavior, ionic crosslinking membrane shows great potential in osmotic energy conversion, which maximum power density can be up to 16.72 W m^-2 . This design of ionic crosslinking-induced nanophase separation offers a roadmap for ion transport promotion.

Geometric Tailoring of Macroscale Ti3C2Tx MXene Lamellar Membrane for Logic Gate Circuits

Constructing nanofluidic diode nanochannels with an asymmetric structure for logic gate circuits has attracted extensive research interests. Currently, the preparation of a geometrically asymmetric nanochannel relies on cost-effective material-processing methods and has been hard to scale up, limiting the development of nanofluidic research. Herein, we introduce the idea of geometric tailoring to cut the MXene lamellar membrane in different shapes and investigate the ion transport behavior systematically. The ion rectification can be regulated by adjusting geometric factors such as the asymmetric ratio and height of the trapezoidal membrane. On the basis of the above-mentioned research on rectification characteristics, we further optimized the trapezoidal membrane into a triangular membrane on the macroscopic level and successfully applied it to logic circuits, realizing the logic operations of "AND" and "OR". It is worth mentioning that the shape of a macrocut triangular membrane is exactly the same as the symbol of an electronic diode, and the conduction and cutoff directions of the ionic current are also exactly the same as those of electronic diodes. Our finding provides a facile and general strategy for fabricating a macroscale geometric asymmetry nanochannel-based two-dimensional lamellar membrane and shows the potential applications in complex highly integrated ionic circuits.