Bioinspired Ultrafast-Responsive Nanofluidic System for Ion and Molecule Transport with Speed Control

Stimuli-Responsive Delivery of Ions through Layered Materials-Based Triangular Nanofluidic Device

The elegance and accuracy of biological ion channels inspire the fabrication of artificial devices with similar properties. Here, we report the fabrication of iontronic devices capable of delivering ions at the nanomolar (nmol) level of accuracy. The triangular nanofluidic device prepared with reconstructed vanadium pentoxide (VO) membranes of thickness 45 ± 5.5 μm can continuously deliver K+, Na+, and Ca2+ ions at the rate of 0.44 ± 0.24, 0.35 ± 0.06, and 0.03 nmol/min, respectively. The ionic flow rate can be further tuned by modulating the membrane thickness and salt concentration at the source reservoir. The triangular VO device can also deliver ions in minuscule doses (∼132 ± 9.7 nmol) by electrothermally heating (33 °C) with a nichrome wire (NW) or applying light of specific intensities. The simplicity of the fabrication process of reconstructed layered material-based nanofluidic devices allows the design of complicated iontronic devices such as the three-terminal-Ni-VO (3T-Ni-VO) devices.

Stimuli-Responsive Ion Transport Regulation in Nanochannels by Adhesion-Induced Functionalization of Macroscopic Outer Surface

Responsive regulation of ion transport through nanochannels is crucial in the design of smart nanofluidic devices for sequencing, sensing, and water-energy nexus. Functionalization of the inner wall of the nanochannel enhances interaction with ions and fluid but restricts versatile chemical approaches and accurate characterizations of fluidic interfaces. Herein, we reveal a responsive regulating mechanism of ion transport through nanochannels by polydopamine (PDA)-induced functionalization on the macroscopic outer surface of nanochannels. Responsive molecules were codeposited with PDA on the outer surface of nanochannels and formed a valve of nanometer thickness to manually manipulate ion transport by changing its gap spacing, surface charge, and wettability under external stimulus. The response ratio can be up to 100-fold by maximizing the proportion of responsive molecules on the outer surface. Laminating the codepositions of different responsive molecules with PDA on the channel's outer surface produces multiple responses. A nearly universal adhesion of PDA with responsive molecules on the open outer surface induces nanochannels responsive to different external stimuli with variable response ratios and arbitrary combinations. The results challenge the primary role of functionalization on the nanoconfined interface of nanofluidics and open opportunities for developing new-style nanofluidic devices through the functionalization of macroscopic interface.

Ion transport in nanofluidics under external fields

Nanofluidic channels with tailored ion transport dynamics are usually used as channels for ion transport, to enable high-performance ion regulation behaviors. The rational construction of nanofluidics and the introduction of external fields are of vital significance to the advancement and development of these ion transport properties. Focusing on the recent advances of nanofluidics, in this review, various dimensional nanomaterials and their derived homogeneous/heterogeneous nanofluidics are first briefly introduced. Then we discuss the basic principles and properties of ion transport in nanofluidics. As the major part of this review, we focus on recent progress in ion transport in nanofluidics regulated by external physical fields (electric field, light, heat, pressure, etc.) and chemical fields (pH, concentration gradient, chemical reaction, etc.), and reveal the advantages and ion regulation mechanisms of each type. Moreover, the representative applications of these nanofluidic channels in sensing, ionic devices, energy conversion, and other areas are summarized. Finally, the major challenges that need to be addressed in this research field and the future perspective of nanofluidics development and practical applications are briefly illustrated.

Recognition of Oligonucleotide C by Polydopamine-Coated Solid-State Nanopores

Selective recognition of short oligonucleotides at the single-molecule level is particularly important for early disease detection and treatment. In this work, polydopamine (PDA)-coated nanopores were prepared via self-polymerization as a solid-state nanopore sensing platform for the recognition of oligonucleotide C (PolyC). The PDA coating possesses abundant active sites, such as indole, amino, carboxyl, catechol, and quinone structures, which had interactions with short oligonucleotides to slow down the translocation rate. PDA-coated nanopores selectively interact with PolyC20 by virtue of differences in hydrogen bonding forces, generating a larger blocking current, while polyA and polyT demonstrated very small blockings. At the same time, PDA-coated nanopores can sensitively distinguish PolyC with different lengths, such as 20, 14, and 10 nt. The functionalization of PDA on the solid-state nanopore provides an opportunity for the rational design of the recognition surface for biomolecules.

Mosaic Patterned Surfaces toward Generating Hardly-Volatile Capsular Droplet Arrays for High-Precision Droplet-Based Storage and Detection

Precise detection involving droplets based on functional surfaces is promising for the parallelization and miniaturization of platforms and is significant in epidemic investigation, analyte recognition, environmental simulation, combinatorial chemistry, etc. However, a challenging and considerable task is obtaining mutually independent droplet arrays without cross-contamination and simultaneously avoiding droplet evaporation-caused quick reagent loss, inaccuracy, and failure. Herein, a strategy to generate mutually independent and hardly-volatile capsular droplet arrays using innovative mosaic patterned surfaces is developed. The evaporation suppression of the capsular droplet arrays is 1712 times higher than the naked droplet. The high evaporation suppression of the capsular droplet arrays on the surfaces is attributed to synergistic blocking of the upper oil and bottom mosaic gasproof layer. The scale-up of the capsular droplet arrays, the flexibility in shape, size, component (including aqueous, colloidal, acid, and alkali solutions), liquid volume, and the high-precision hazardous substance testing proves the concept's high compatibility and practicability. The mutually independent capsular droplet arrays with amazingly high evaporation suppression are essential for the new generation of high-performance open-surface microfluidic chips used in COVID-19 diagnosis and investigation, primary screening, in vitro enzyme reactions, environmental monitoring, nanomaterial synthesis, etc.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (F _d versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, F _dynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.

Magnetocontrollable droplet mobility on liquid crystal-infused porous surfaces

Magnetocontrollable droplet mobility on surfaces of both solids and simple fluids have been widely used in a wide range of applications. However, little is understood about the effect of the magnetic field on the wettability and mobility of droplets on structured fluids. Here, we report the manipulation of the dynamic behaviors of water droplets on a film of thermotropic liquid crystals (LCs). We find that the static wetting behavior and static friction of water droplets on a 4'-octyl-4-biphenylcarbonitrile (8CB) film strongly depend on the LC mesophases, and that a magnetic field caused no measurable change to these properties. However, we find that the droplet dynamics can be affected by a magnetic field as it slides on a nematic 8CB film, but not on isotropic 8CB, and is dependent on both the direction and strength of the magnetic field. By measuring the dynamic friction of a droplet sliding on a nematic 8CB film, we find that a magnetic field alters the internal orientational ordering of the 8CB which in turn affects its viscosity. We support this interpretation with a scaling argument using the LC magnetic coherence length that includes (i) the elastic energy from the long-range orientational ordering of 8CB and (ii) the free energy from the interaction between 8CB and a magnetic field. Overall, these results advance our understanding of droplet mobility on LC films and enable new designs for responsive surfaces that can manipulate the mobility of water droplets.

Electronic Supplementary Material

Supplementary material (further details of the stability of LCIPS against water-induced dewetting, the interfacial tension and contact angle measurement using a goniometer, the estimation of the thickness of LC wrapping layer at air-water interface on droplets, SEM measurements, the average sliding velocity of a water droplet on 5CB, E7, silicone oil, and mineral oil films with and without a magnetic field, representative force diagram (Fd versus time) of a 3-µL water droplet moving at a speed of 0.1 mm/s on a nematic 8CB film, Fdynamic acting on 3 µL water droplets moving at speeds of 0.1-1 mm/s on an isotropic 8CB film, the calculated magnetic coherence length as a function of the magnitude of the magnetic field applied to the nematic LCIPS, and the apparent advancing and receding contact angles of a moving water droplet on nematic LCIPS as a function of time, and polarized light micrographs (top view) of a nematic 8CB film between two DMOAP-functionalized glass slides before and after applying a horizontal magnetic field) is available in the online version of this article at 10.1007/s12274-022-5318-y.

Janus Charged Droplet Manipulation Mediated by Invisible Charge Walls

The ability to control the mobility and function of droplets is fundamental to developing open surface microfluidics. Despite notable progress in the manipulation of droplets, the existing strategies are still limited in functionalizing droplets. Herein, the coupling of droplet motion and functionalization elicited by an invisible charge wall is reported. The charged superamphiphobic surface is overlapped with a conductor to induce free charge, creating the invisible charge wall at the overlapping boundary. The charge wall can trap droplets and polarize them into Janus charged state. It is found that the trapping degree and the charge distribution in the Janus charged droplet depend on the original surface charge on the superamphiphobic surface. The invisible charge wall can also be established at diverse boundary curvatures, allowing to design pathways for droplet manipulations. Furthermore, the enrichment of protein and nanomaterial in the manipulated Janus charged droplet is demonstrated. The strategy provides a potential microfluidic platform with orthogonal functionalities.

Solid-state nanopore: chemical modifications, interactions, and functionalities

Nanopore technology is a burgeoning detection technology for single-molecular sensing and ion rectification. Solid-state nanopores have attracted more and more attention because of their higher stability and tunability than biological nanopores. However, solid-state nanopores still suffer the drawbacks of low signal-to-noise ratio and low resolution, which hinders their practical applications. Thus, developing operatical and useful methods to overcome the shortages of solid-state nanopores is urgently needed. Here, we summarize the recent research on nanopore modification to achieve this goal. Modifying solid-state nanopores with different coating molecules can improve the selectivity, sensitivity, and stability of nanopores. The modified molecules can introduce different functions into the nanopores, greatly expanding the applications of this novel detection technology. We hope that this review of nanopore modification will provide new ideas for this field.

Ultrafast Laser-Ablated Bioinspired Hydrogel-Based Porous Gating System for Sustained Drug Release

Gating systems have been extensively researched in energy harvesting, lab-on-chip applications, and so forth. However, the controlled drug delivery system with artificial hydrogel-based porous gating systems (HPGSs) is rarely reported. Herein, a biomimetic HPGS with a pH-responsive hydrogel as the valve and polydimethylsiloxane as the frame is fabricated by in situ femtosecond laser microdrilling and subsequent ultraviolet exposure. The proposed HPGS loaded with doxorubicin hydrochloride (DOX) is stable under physiological conditions, has a low drug leakage rate, and can achieve sustained drug release in a low pH environment. The experimental results show that the drug release is mainly controlled by non-Fickian diffusion, which renders the dynamic speed control of molecular transport possible. Moreover, the HPGS can also be prepared into an antitumor microcapsule. The results of in vitro cell experiments demonstrate that DOX@HPGS can release drugs and achieve terrific therapeutic efficacy in the elimination of HeLa cells in the acidic environments around tumor cells. This functional HPGS is envisioned to be an ideal pH-response carrier for sustained drug release treatment of digestive diseases such as inflammatory bowel disease and gastrointestinal cancer.

Modularizable Liquid-Crystal-Based Open Surfaces Enable Programmable Chemical Transport and Feeding using Liquid Droplets

Droplet-based miniature reactors have attracted interest in both fundamental studies, for the unique reaction kinetics they enable, and applications in bio-diagnosis and material synthesis. However, the precise and automatic feeding of chemicals, important for the delicate reactions in these miniaturized chemical reactors, either requires complex, high-cost microfluidic devices or lacks the capability to maintain a pinning-free droplet movement. Here, the design and synthesis of a new class of liquid crystal (LC)-based open surfaces, which enable a controlled chemical release via a programmable LC phase transition without sacrificing the free transport of the droplets, are reported. It is demonstrated that their intrinsic slipperiness and self-healing properties enable a modularizable assembly of LC surfaces that can be loaded with different chemicals to achieve a wide range of chemical reactions carried out within the droplets, including sequential and parallel chemical reactions, crystal growth, and polymer synthesis. Finally, an LC-based chemical feeding device is developed that can automatically control the release of chemicals to direct the simultaneous differentiation of human induced pluripotent stem cells into endothelial progenitor cells and cardiomyocytes. Overall, these LC surfaces exhibit desirable levels of automation, responsiveness, and controllability for use in miniature droplet carriers and reactors.

Ferrofluids transport in bioinspired nanochannels: Application to electrochemical biosensing with magnetic-controlled detection

Controllable transport of ions, molecules or fluids in bioinspired nanochannels is crucial to study biointeraction occurred in confined space and also develop biosensing platforms or devices. Herein, ferrofluids transport in biofunctionalized nanochannels was investigated and a novel electrochemical biosensing platform with the characteristic of label-free, high sensitivity and rapid response was constructed. The hydrophilic ferrofluids can flux swiftly through the antibody-immobilized nanochannels with the assistance of a permanent magnet. It was initially found that the presence of ferrofluids would depress the redox current of the electrochemical probe [Fe(CN)₆]^3-. The mechanism of the depressing effect was ascribed to the constrained diffusion of [Fe(CN)₆]^3- which lowered the concentration of it at the electrode surface and the weak adsorption of the ferrofluids which increased the charge transfer resistance of the interface. Therefore, redox current of the probe was applied to indicate the amount of the ferrofluids fluxing through the bioinspired nanochannels. The steric hindrance of the bioinspired nanochannels changed with the amount of the corresponding target being incubated, resulting in quantitative variation of the redox current. In this way, electrochemical biosensing platform based on ferrofluids transport was constructed. Using carbohydrate antigen 153 (CA153) as a model target, a low detection limit of 0.0013 U·mL^-1 was acquired. This magnetic-controlled bioelectrochemical platform was expected to be expanded to other applications such as genetic testing, drug analysis, and molecular identification.

Magneto-Responsive Microneedle Robots for Intestinal Macromolecule Delivery

Oral administration is the most convenient and commonly used approach for drug delivery, while it is still a challenge to overcome the complicated gastrointestinal barriers and realize efficient macromolecular drug absorption. Here, novel magneto-responsive microneedle robots are presented for efficient oral delivery of versatile macromolecules. These microneedle robots with three components of the magnetic substrate, the separable connection, and tips are generated by a Lego-brick-stacking-inspired multistage 3D fabrication strategy. With the assistance of commercial enteric capsule encapsulation, they can be taken orally and be released when entering the small intestine. Benefitting from their polarized magnetic substrate, the tips of the microneedle robots can orient to the small intestinal wall, overcome the barriers, insert into the tissue, and deliver encapsulated actives under specific magnetic fields. Besides, after the separable connection degrades, the tips can be left inside the tissue for continuous actives release, and the magnetic substrate can be excreted safely. Based on these features, the practical values of the microneedle robots are demonstrated by using them to orally deliver insulin and efficiently regulate the blood glucose of pigs. It is believed that the proposed microneedle robots can orally deliver diverse macromolecules and thus open a new chapter for oral administration.

MXene-Integrated Microneedle Patches with Innate Molecule Encapsulation for Wound Healing

Wound healing is a complex physiological process that involves coordinated phases such as inflammation and neovascularization. Attempts to promote the healing process tend to construct an effective delivery system based on different drugs and materials. In this paper, we propose novel MXene-integrated microneedle patches with adenosine encapsulation for wound healing. Owing to the dynamic covalent bonding capacity of boronate molecules with adenosine, 3-(acrylamido)phenylboronic acid- (PBA-) integrated polyethylene glycol diacrylate (PEGDA) hydrogel is utilized as the host material of microneedle patches. Benefitting from photothermal conversion capacity of MXene, the release of loaded adenosine could be accelerated under NIR irradiation for maintaining the activation signal around injury site. In vitro cell experiments proved the effect of MXene-integrated microneedle patches with adenosine encapsulation in enhancing angiogenesis. When applied for treating animal models, it is demonstrated that the microneedle patches efficiently promote angiogenesis, which is conductive to wound healing. These features make the proposed microneedle patch potential for finding applications in wound healing and other biomedical fields.

Manipulating Dispersions of Magnetic Nanoparticles

Dispersions of magnetic nanoparticles (MNPs) can exhibit paramagnetic ferrofluid or ferromagnetic liquid behavior. By modifying the surface functionality of MNPs, ferrofluids have been used to fabricate novel magnetically actuated devices. If the surface-functionalized MNPs interact with complementary ligands at a fluid-fluid interface, MNP surfactants form and in situ assemble at the interface. When jammed interfacially, MNP surfactants give rise to ferromagnetic behavior of the liquid (droplet), which is endowed with permanent magnetic dipoles while maintaining all of the characteristics of a fluid system. Here, we give a brief overview of the developments in the dispersion of MNPs in liquids from ferrofluids to ferromagnetic liquid droplets, their responses to external fields, and the manipulation of these responses for end uses. The reversible room-temperature para-to-ferro transformation of magnetic liquids is highlighted. We discuss challenges in the synthesis and characterization of these unusual liquids along with potential technological applications.