Photoluminescent and Chromic Nanomaterials for Anticounterfeiting Technologies: Recent Advances and Future Challenges

Styrylbenzoquinoline dyads as a new type of fluorescing photochromes operating via [2 + 2] photocycloaddition mechanism: Optimization of the structure

We synthesized and studied a novel bichromophoric dyad in which bridging methylene groups link two styrylbenzo[f]quinoline (SBQ) photochromes to a salicylic acid residue. The dyad was designed for use as a fluorescent P-type photochrome acting via a [2 + 2] photocycloaddition (PCA) reaction. Compared to previously studied dyads, a change in the attachment handle and shortening of the bridging groups resulted in simultaneous rise of the quantum yields of both fluorescence and PCA. Under light irradiation, two competitive reversible reactions occurred in the dyad. The first is photoisomerization between the trans- and cis- isomers of the SBQ moieties. The second is PCA. The latter process was predominant and resulted in the formation of the cyclobutane ring bearing two benzo[f]quinoline (BQ) groups. In the ground S0 state, NMR data and DFT calculations indicated the formation of folded dyad conformers whose structure is pre-organized for PCA due to π-stacking interactions of two SBQ moieties. In the excited dyad, steady-state and time-resolved nanosecond fluorescence spectroscopy revealed the formation of an excimer, which was assumed to be a precursor of cyclobutane. Due to the fluorescence properties of SBQ and BQ, both dyad and cyclobutane fluoresce and can serve as a color-correlated multicolor fluorescence photoswitch. A simple approach is proposed for predicting the relationship between the spectral properties of the dyad and cyclobutane, which are the open and closed isomers of a new type of photochromes. The approach uses the dependence of the position of the maximum of the absorption band of an aromatic compound on the size of the π-system, as well as the fact that the sizes of the π-systems of the dyad and cyclobutane are related by a simple relation.

Programmable multimode optical encryption of advanced printable security inks by integrating structural color with Down/Up- conversion photoluminescence

Optical information encryption with high encoding capacities can significantly boost the security level of anti-counterfeiting in the scenario of guaranteeing the authenticity of a wide scope of common and luxury goods. In this work, a novel counterfeiting material with high-degree complexity is fabricated by microencapsulating cholesteric liquid crystals and triplet-triplet annihilation upconversion fluorophores to integrate structural coloration with fluorescence and upconversion photoluminescence. Moreover, the multimode security ink presents tailorable optical behaviors and programmable abilities on flexible substrates by various printing techniques, which offers distinct information encryption under different optical modes. The advanced strategy provides a practical versatile platform for high-secure-level multimode optical inks with largely enhanced encoding capacities, programmability, printability, and cost-effectiveness, which manifests enormous potentials for information encryption and anti-counterfeiting technology.

Tunable Nano-Bending Structures of Loosened/Tightened Lassos with Bi-Stable Vibration-Induced Emissions for Multi-Manipulations of White-Light Emissions and Sensor Applications

The first tunable nano-bending structures of [1]rotaxane containing a single-fluorophoric N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC) moiety (i.e., [1]RA) are developed as a loosened lasso structure to feature the bright white-light emission [CIE (0.27, 0.33), Φ = 21.2%] in THF solution, where bi-stable states of bending and twisted structures of DPAC unit in [1]RA produce cyan and orange emissions at 480 and 600 nm, respectively. With acid/base controls, tunable loosened/tightened nano-loops of corresponding [1]rotaxanes (i.e., [1]RA/[1]RB) can be achieved via the shuttling of macrocycles reversibly, and thus to adjust their respective white-light/cyan emissions, where the cyan emission of [1]RB is obtained due to the largest conformational constraint of DPAC moiety in its bending form of [1]RB with a tightened lasso structure. Additionally, the non-interlocked analog M-Boc only shows the orange emission, revealing the twisted form of DPAC fluorophore in M-Boc without any conformational constraint. Moreover, the utilization of solvents (with different viscosities and polarities), temperatures, and water fractions could serve as effective tools to adjust the bi-stable vibration-induced emission (VIE) colors of [1]rotaxanes. Finally, tuning ratiometric emission colors of adaptive conformations of DPAC moieties by altering nano-bending structures in [1]rotaxanes and external stimuli can be further developed as intelligent temperature and viscosity sensor materials.

Recent advances in photoresponsive printing inks for security encoding applications

Counterfeiting of banknotes, important documents, and branded goods continues to be a major worldwide problem for governments, businesses, and consumers. This problem has serious financial, security, and health implications. Due to their stability for printing on various substrates, the photochromic anticounterfeiting inks have received important interest. There have been various photochromic agents, such as polymer nanoparticles, quantum and carbon dots, and organic and inorganic fluorophores and luminophores, which have been broadly used for antiforging applications. In comparison to organic agents, inorganic photochromic materials have better stability under reversible/long-term light illumination. Recently, the remarkable optical characteristics and chemical stability of photoluminescent and photochromic agents have led to their extensive usage anticounterfeiting products. There have been also several strategies to tackle the rising problem of counterfeiting. Both of solvent-based and water-based inks have been developed for security encoding purposes. Additionally, the printing methods, including screen printing, labeling, stamping, inkjet printing, and handwriting, that have been used to apply anticounterfeiting inks onto various surfaces are discussed. The limitations of photoluminescent and photochromic agents and the potential for their future preparation to combat counterfeiting were discussed. This review would benefit academic researchers and industrial developers who are interested in the area of security printing.

Multicolor Photochemical Printing Inside Polymer Matrices for Advanced Photonic Anticounterfeiting

Conventional security inks, generally directly printed on the data page surface, are vulnerable to counterfeiters, thereby raising the risk of chemical structural deciphering. In fact, polymer film-based data pages with customized patterns embedded within polymer matrix, rather than printed on the surface, emerge as a promising solution. Therefore, the key lies in developing fluorophores offering light dose-controlled fluorescent color inside polymer matrices. Though conventional fluorophores often suffer from photobleaching and uncontrolled photoreactions, disqualifying them for this purpose. Herein a diphenanthridinylfumaronitrile-based phototransformers (trans-D5) that undergoes photoisomerization and subsequent photocyclization during photopolymerization of the precursor, successively producing cis- and cyclo-D5 with stepwise redshifted solid-state emissions is developed. The resulting cyclo-D5 exhibits up to 172 nm emission redshift in rigidifying polymer matrices, while trans-D5 experiences a slightly blueshifted emission (≈28 nm), cis-D5 undergoes a modest redshift (≈14 nm). The markedly different rigidochromic behaviors of three D5 molecules within polymer matrices enable multicolor photochemical printing with a broad hue ranging from 38 to 10 via an anticlockwise direction in Munsell color space, yielding indecipherable fluorescent patterns in polymer films. This work provides a new method for document protection and implements advanced security features that are unattainable with conventional inks.

Preparation of waterborne anti-counterfeiting ink based on dual luminescent nanohybrids of bacterial cellulose nanocrystals and lanthanide‑nitrogen co-modified GQDs

To address the growing challenge of counterfeit prevention, this study developed a novel anti-counterfeiting ink system based on bacterial cellulose nanocrystals (BCNC) and lanthanide (Er, Yb)‑nitrogen (N) co-dropped graphene quantum dots (GQDs), which exhibited both photoluminescence (PL) and upconversion photoluminescence (UCPL) fluorescent properties as well as excellent rheological characteristics. The Er/Yb/N-GQDs with positive charges were synthesized by a one-step hydrothermal method and subsequently assembled with negatively charged BCNC through electrostatic self-assembly to fabricate a novel nanohybrid, Er/Yb/N-GQDs-BCNC. Raman spectroscopy results indicated an enhancement in the graphitization of GQDs due to lanthanide modification. The TEM results demonstrated a homogeneous distribution of Er/Yb/N-GQDs on BCNC, while XRD, FTIR, and XPS analyses confirmed their physical binding, thus validating the successful synthesis of novel nanohybrids. Then, Er/Yb/N-GQDs-BCNC was introduced into PVA waterborne ink and exhibited dual anti-counterfeiting properties by emitting blue fluorescence at Em 440 nm under Ex 370 nm and green fluorescence at Em 550 nm under Ex 980 nm. Furthermore, the incorporation of BCNC significantly enhanced the thixotropic behavior and yield stress of the PVA waterborne ink. This enhancement made the dual anti-counterfeiting fluorescent ink more suitable for diversified applications on different devices and various substrates, thus providing a novel approach for convenient and rapid information encryption and high security anti-counterfeiting.

Multiple photofluorochromic luminogens via catalyst-free alkene oxidative cleavage photoreaction for dynamic 4D codes encryption

Controllable photofluorochromic systems with high contrast and multicolor in both solutions and solid states are ideal candidates for the development of dynamic artificial intelligence. However, it is still challenging to realize multiple photochromism within one single molecule, not to mention good controllability. Herein, we report an aggregation-induced emission luminogen TPE-2MO2NT that undergoes oxidation cleavage upon light irradiation and is accompanied by tunable multicolor emission from orange to blue with time-dependence. The photocleavage mechanism revealed that the self-generation of reactive oxidants driving the catalyst-free oxidative cleavage process. A comprehensive analysis of TPE-2MO2NT and other comparative molecules demonstrates that the TPE-2MO2NT molecular scaffold can be easily modified and extended. Further, the multicolor microenvironmental controllability of TPE-2MO2NT photoreaction within polymer matrices enables the fabrication of dynamic fluorescence images and 4D information codes, providing strategies for advanced controllable information encryption.

Fluorescent Materials Based on Spiropyran for Advanced Anti-Counterfeiting and Information Encryption

In daily life, counterfeit and substandard products, particularly currency, medicine, food, and confidential documents, are capable of bringing about very serious consequences. The development of anti-counterfeiting and authentication technologies with multilevel securities is a powerful means to overcome this challenge. Among various anti-counterfeiting technologies, fluorescent anti-counterfeiting technology is well-known and commonly used to fight counterfeiters due to its wide material source, low cost, simple usage, good concealment, and simple response mechanism. Spiropyran is favored by scientists in the fields of anti-counterfeiting and information encryption due to its reversible photochromic property. Here, we summarize the current available spiropyran-based fluorescent materials from design to anti-counterfeiting applications. This review will be help scientists to design and develop fluorescent anti-counterfeiting materials with high security, high performance, quick response, and high anti-counterfeiting level.

Hydro-Photo-Thermo-Responsive Multicolor Luminescence Switching of a Ternary MOF Hybrid for Advanced Information Anticounterfeiting

Developing smart materials capable of solid-state multicolor photoluminescence (PL) switching in response to multistimuli is highly desirable for advanced anticounterfeiting. Here, a ternary MOF hybrid showing hydro-photo-thermo-responsive multicolor PL switching in the solid state is presented. This hybrid is constructed by co-immobilizing Eu3+ and methyl viologen (MV) cations within an anionic MOF via the cation-exchange approach. The confined guest cations are well arranged in the framework channels, facilitating the synergistic realization of stimuli-responsive multiple PL color-switching through intermolecular coupling. The hybrid undergoes a rapid and reversible PL color-switching from red to blue upon water simulation, which is achieved by activating the blue emission of the framework linker while simultaneously quenching the Eu3+ emission. Furthermore, the hybrid displays photo-thermo-responsive PL switching from red to dark. UV-light irradiation or heating triggers the chromic conversion of MV to its colored radical form, which exhibits perfect spectral overlap with Eu3+, thus activating Förster resonance energy transfer (FRET) from Eu3+ to MV radicals and quenching the Eu3+ emission. Inspired by these results, PL morse patterns are designed and fabricated using a novel triple-level encryption strategy, showcasing the exciting potential of this hybrid in advanced anticounterfeiting applications.

Self-indicating polymers: a pathway to intelligent materials

Self-indicating polymers have emerged as a promising class of smart materials that possess the unique ability to undergo detectable variations in their physical or chemical properties in response to various stimuli. This article presents an overview of the most important mechanisms through which these materials exhibit self-indication, including aggregation, phase transition, covalent and non-covalent bond cleavage, isomerization, charge transfer, and energy transfer. Aggregation is a prevalent mechanism observed in self-indicating polymers, where changes in the degree of molecular organization result in variations in optical or electrical properties. Phase transition-induced self-indication relies on the transformation between different phases, such as liquid-to-solid or crystalline-to-amorphous transitions, leading to observable changes in color or conductivity. Covalent bond cleavage-based self-indicating polymers undergo controlled degradation or fragmentation upon exposure to specific triggers, resulting in noticeable variations in their structural or mechanical properties. Isomerization is another crucial mechanism exploited in self-indicating polymers, where the reversible transformation between the different isomeric forms induces detectable changes in fluorescence or absorption spectra. Charge transfer-based self-indicating polymers rely on the modulation of electron or hole transfer within the polymer backbone, manifesting as changes in electrical conductivity or redox properties. Energy transfer is an essential mechanism utilized by certain self-indicating polymers, where energy transfer between chromophores or fluorophores leads to variations in the emission characteristics. Furthermore, this review article highlights the diverse range of applications for self-indicating polymers. These materials find particular use in sensing and monitoring applications, where their responsive nature enables them to act as sensors for specific analytes, environmental parameters, or mechanical stress. Self-indicating polymers have also been used in the development of smart materials, including stimuli-responsive coatings, drug delivery systems, food sensors, wearable devices, and molecular switches. The unique combination of tunable properties and responsiveness makes self-indicating polymers highly promising for future advancements in the fields of biotechnology, materials science, and electronics.

Multisite Fine-Tuning in Hybrid Cadmium Halides Enables Wide Range Emissions for Anti-Counterfeiting

Achieving tunable emissions spanning the spectrum, from blue to near-infrared (NIR) light, within a single component is a formidable challenge with significant implication, particularly in tailoring multicolor luminescence for anti-counterfeiting purposes. In this study, we demonstrate a broad spectrum of emissions, covering blue to red and extending into NIR light in [BPy]2CdX4 : xSb3+ (BPy=Butylpyridinium; X=Cl, Br; x=0 to 0.08) through precise multisite structural fine-tuning. Notably, the multicolor emissions from [BPy]2CdBr4 : Sb3+ manifest a distinctive pattern, transitioning from blue to yellow in tandem with the host [BPy]2CdBr4 and further extending from yellow to NIR with its homologous [BPy]2CdCl4 : Sb3+, resulting in the simultaneous presence of intersecting and independent emission colors. Detailed modulation of chemical composition enables partial luminescence switching, facilitating the creation of diverse patterns with multicolor luminescence by employing [BPy]2CdX4 : xSb3+ as phosphors. This study for the first time successfully implements several groups of tunable emission colors in a single matrix via multisite fine-tuning. Such an effective strategy not only develops the specific relationships between tunable emissions and adjustable compositions, but also introduces a cost-effective and straightforward approach to achieving unique, high-level, plentiful-color and multiple-information-storage labels for advanced anti-counterfeiting applications.

Rewritable Photoluminescence and Structural Color Display for Dual-Responsive Optical Encryption

Optical encryption using coloration and photoluminescent (PL) materials can provide highly secure data protection with direct and intuitive identification of encrypted information. Encryption capable of independently controlling wavelength-tunable coloration as well as variable light intensity PL is not adequately demonstrated yet. Herein, a rewritable PL and structural color (SC) display suitable for dual-responsive optical encryption developed with a stimuli-responsive SC of a block copolymer (BCP) photonic crystal (PC) with alternating in-plane lamellae, of which a variety of 3D and 2D perovskite nanocrystals is preferentially self-assembled with characteristic PL, is presented. The SC of a BCP PC is controlled in the visible range with different perovskite precursor doping times. The perovskite nanocrystals developed in the BCP PC are highly luminescent, with a PL quantum yield of ≈33.7%, yielding environmentally stable SC and PL dual-mode displays. The independently programmed SC and PL information is erasable and rewritable. Dual-responsive optical encryption is demonstrated, in which true Morse code information is deciphered only when the information encoded by SCs is properly combined with PL information. Numerous combinations of SC and PL realize high security level of data anticounterfeiting. This dual-mode encryption display offers novel optical encryption with high information security and anti-counterfeiting.

Steerable mass transport in a photoresponsive system for advanced anticounterfeiting

Numerous anticounterfeiting platforms using photoresponsive materials have been designed to improve information security, enabling applications in anticounterfeiting technology. However, fabricating sophisticated micro/nanostructures using bidirectional mass transport to achieve advanced anticounterfeiting remains challenging. Here, we propose one strategy to achieve steerable mass transport in a photoresponsive system with the assistance of solvent vapor at room temperature. Upon optimizing the host-guest ratio and the width of photoisomerized areas, wettability gradient is acquired just photo-patterning once, then bidirectional mass transport is realized due to the competition of mass transport induced by surface energy gradient of the material itself and flow of the solvent on the film surface with wettability gradient. Taking advantage of the interaction between solvent and film surface with wettability gradient, this bidirectional polymer flow has been successfully applied in multi-mode anticounterfeiting. This work paves a promising avenue toward high-level information storage in soft materials, demonstrating the potential applications in anticounterfeiting.

Multicolor Fluorescent Inks Based on Lanthanide Hybrid Organogels for Anticounterfeiting and Logic Circuit Design

With the rapid development of information technology, the encrypted storage of information is becoming increasingly important for human life. The luminescent materials with a color-changed response under physical or chemical stimuli are crucial for information coding and anticounterfeiting. However, traditional fluorescent materials usually face problems such as a lack of tunable fluorescence, insufficient surface-adaptive adhesion, and strict synthesis conditions, hindering their practical applications. Herein, a series of luminescent lanthanide hybrid organogels (Ln-MOGs) were rapidly synthesized using a simple method at room temperature through the coordination between lanthanide ions and 2,6-pyridinedicarboxylic acid and 5-aminoisophthalic acid. And the multicolor fluorescent inks were also prepared based on the Ln-MOG and hyaluronic acid, with the advantages of being easy to write, color-adjustable, and water-responsive discoloration, which has been applied to paper-based anticounterfeiting technology. Inspired by the responsiveness of the fluorescent inks to water, we designed a logic system that can realize single-input logic operations (NOT and PASS1) and double-input logic operations (NAND, AND, OR, NOR, XOR). The encryption of a binary code can be actualized utilizing different luminescent response modes based on the logic circuit system. By adjusting the energy sensitization and luminescence mechanism of lanthanide ions in the gel structure, the information reading and writing ability of the fluorescent inks were verified, which has great potential in the field of multicolor pattern anticounterfeiting and information encryption.

A viologen-derived luminescent material exhibiting photochromism, photocontrolled luminescence and selective detection of Cr2O72- in aqueous solution

Stable viologen-derived multifunctional smart materials exhibit widespread practical applications in many areas. In this study, a viologen-derived material with 4-fold interpenetrating diamondoid network, {[Cd(1,4-ndc)(cpbpy)]·2H2O}n, was successfully constructed based on asymmetrical N-(3-carboxyphenyl)-4,4'-bipyridinium (cpbpy) and 1,4-naphthalenedicarboxylic acid (1,4-H2ndc). The compound shows reversible photochromic behavior under a xenon lamp, which are proved by UV-vis spectra and EPR characterizations. Moreover, the compound with good photoluminescence properties displays photocontrolled luminescence quenching behaviors. Owing to its good water stability, the compound is then applied in luminescence sensing for the detection of Cr2O72- in aqueous solution. The corresponding luminescence quenching constant for Cr2O72- is KSV = 4.33 × 104 M-1, and the detection limit is 3.66 μM. Systematic investigations on the luminescence quenching mechanism suggest that the inner filter effect resulted in the selective detection of Cr2O72-. This study provides inspiration for the design and synthesis of target luminescent crystalline materials with rigid and asymmetric viologen-derived ligands.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Preparation and dynamic color-changing study of fluorescent polymer nanoparticles for individualized and customized anti-counterfeiting application

Preparing new fluorescent materials for individualized and customized anti-counterfeiting applications to meet needs from the rapid development of e-commerce is of great significance. This paper reports the preparation of dynamic color-changing fluorescent polymer nanoparticles (PNPs) by constructing a fluorescence resonance energy transfer (FRET) pair between aggregation-induced emission (AIE) structures and photochromic structures. At first, methyl methacrylate (MMA) was used as the main monomer and tetraphenylethylene (TPE, a typical AIE structure) modified methacrylate (TPE-MA) and photochromic spiropyran (SP) modified methacrylate (SP-MA) as minor monomers were copolymerized to obtain the ternary copolymer PMMA-TPE-SP. Then, two types of PNPs based on this terpolymer was prepared via the reprecipitation method, with and without the addition of an amphiphilic polymer as the surfactant. The photophysical study shows that the fluorescence color of PNPs dynamically changes from blue to light violet and finally to red under UV light irradiation, a process that can be reversed under visible light. The PNPs were alternately irradiated with UV light and visible light for 10 cycles, which proved their good photoswitching reproducibility. The PNPs prepared with addition of surfactant were found to have stronger fluorescence and better stability. Finally, the photochromic fluorescent inks were prepared based on these PNPs. Several anti-counterfeiting scenarios and modes were designed, exhibiting excellent photochromic behavior on cellulose paper, even after 120 days of long-term storage. With simple equipment, desirable anti-counterfeiting effects with dynamic fluorescence color changing was achieved. This study demonstrated a promising hard-to-imitate anti-counterfeiting encryption strategy, which can achieve multiple outputs with simple operation and can be personalized and customized as needed.

Preparation of high-strength photochromic alginate fibers based on the study of flame-retardant properties

Color-changing fibers have attracted much attention for their wide applications in camouflage, security warnings, and anti-counterfeiting. The inorganic color-changing material tungsten trioxide (WO3) has been widely investigated for its good stability, controllability, and ease of synthesis. In this study, photochromic alginate fibers (WO3@Ca-Alg) were prepared by incorporating UV-responsive hybrid tungsten trioxide nanoparticles in the fiber production process. The prepared photochromic alginate fibers changed from white to dark blue after 30 min of UV irradiation and returned to their original color after 64 h. It can be seen that WO3@Ca-Alg has the advantage of long color duration. The strength of this fiber reached 2.61 cN/dtex and the limiting oxygen index (LOI) was 40.9 %, which indicates that the fiber exhibited mechanical resistance and flame-retardant properties. After the cross-linking of WO3@Ca-Alg by sodium tetraborate, a new core-shell structure was generated, which was able to encapsulate tungsten trioxide in it, thus reducing the amount of tungsten trioxide loss, and its salt and washing resistance was greatly improved. This photochromic alginate fiber can be mass produced and spun into yarn.

Photoswitchable Photochromic Chelating Spironaphthoxazines: Synthesis, Photophysical Properties, Quantum-Chemical Calculations, and Complexation Ability

The stable and efficient photochromic and photoswitchable molecular systems designed from spirooxazines are of increasing scientific and practical interest because of their present and future applications in advanced technologies. Among these compounds, chelating spironaphthoxazines have received widespread attention due to their efficient optical response after complexation with some metal ions being of biomedical interest and environmental importance, as well as their good cycle performance and high reliability, especially by metal ion sensing. In this mini-review, we summarize our results in the design of novel photoswitchable chelating spironaphthoxazines with specific substituents in their naphthoxazine or indoline ring systems in view of recent progress in the development of such molecular systems and their applications as metal ion sensors. The design, synthesis methods, and photoresponse of such spirooxazine derivatives relevant to their applications, as well as quantum-chemical calculations for these compounds, are presented. Examples of various design concepts are discussed, such as sulfobutyl, hydroxyl, benzothiazolyl, or ester and carboxylic acid as substituents in the chelating spironaphthoxazine molecules. Further developments and improvements of this interesting and promising kind of molecular photoswitches are outlined.

Light-Responsive Supramolecular Liquid-Crystalline Metallacycle for Orthogonal Multimode Photopatterning

The development of multimode photopatterning systems based on supramolecular coordination complexes (SCCs) is considerably attractive in supramolecular chemistry and materials science, because SCCs can serve as promising platforms for the incorporation of multiple functional building blocks. Herein, we report a light-responsive liquid-crystalline metallacycle that is constructed by coordination-driven self-assembly. By exploiting its fascinating liquid crystal features, bright emission properties, and facile photocyclization capability, a unique system with spatially-controlled fluorescence-resonance energy transfer (FRET) is built through the introduction of a photochromic spiropyran derivative, which led to the realization of the first example of a liquid-crystalline metallacycle for orthogonal photopatterning in three-modes, namely holography, fluorescence, and photochromism.

Preparation of Self-Healing Anthocyanidin-Containing Thermochromic Alginate Ink for Authentication Purposes

Thermochromic inks have proven to be a promising security encoding approach for making commercially available products less susceptible to forgery. However, thermochromic inks have been plagued with poor durability. Thus, self-healable hydrogels can be used as self-repair inks with better durability. Herein, we combined hybrid cellulose nanofibers (CNFs) and sodium alginate (SA) with anthocyanidin(Cy)-based Brassica oleracea L. var. capitata extract in the existence of mordant (ferrous sulfate) to create a self-healing ink for authentication. CNFs were used as a reinforcement agent to enhance the mechanical strength of the sodium alginate hydrogel. Both durability and thermal stability were ensured using self-healing inks. Red cabbage was used to extract Cy-based chromophore as an environmentally friendly spectroscopic probe for immobilization into SA. Using varying concentrations of anthocyanidin, self-healable composite hydrogels (Cy@SA) with thermochromic properties were provided. Using the CIE Lab color coordinate system, homogeneous purple (569 nm) films were printed onto a sheet surface. Upon heating from 25 to 70 °C, the purple color changed to red (433 nm). Transmission electron microscopy was applied to study anthocyanidin/mordant (Cy/M) nanoparticles (NPs). The properties of the applied prints were analyzed using several methods. Both the hydrogel and stamped sheets were tested for their mechanical and rheological characteristics, respectively. Research on the nanocomposite ink (Cy@SA) antibacterial properties and cytotoxicity was also conducted.

Highly bright solid-state carbon dots for efficient anticounterfeiting

Carbon dots (C-dots) as promising fluorescent materials have attracted much attention because of their low toxicity and excellent optoelectronic properties. However, the aggregation-caused quenching (ACQ) of the solid-state C-dots has limited their potential applications in anti-counterfeiting and optoelectronic devices. In this work, C-dot powder was prepared by directly dispersing the as-prepared C-dots in a polymer matrix or in situ formation of the C-dot/Ca-complex by vacuum heating in the presence of boric acid. The as-prepared C-dots have high quantum yields (QYs) in the range of 40-67% with temperature-dependent photoluminescent (PL) properties. As a proof of concept, the as-synthesized C-dots were used to produce a flexible anti-counterfeiting code and showed high-level security. This highlights the potential of C-dots in solid-state information, anti-information encryption and anti-counterfeiting.

Polarization-encoded optical secret sharing based on a dielectric metasurface incorporating near-field nanoprinting and far-field holography

Metasurface encryption with high concealment and resolution is promising for information security. To improve the encryption security, a polarization-encoded secret sharing scheme based on dielectric metasurface by combining the secret sharing method with nanoprinting and holography is proposed. In this encryption scheme, the secret image is split into camouflaged holograms of different polarization channels and shares a total of 24-1 encryption channels. Benefiting from the secret sharing mechanism, the secret image cannot be obtained by decoding the hologram with a single shared key. Specifically, the secret hologram of a specific channel in the far field can be obtained by specifying the optical key, acquiring the near-field nanoprinting image to determine the combination order for the shared key, and decoding using multiple shared keys. The secret sharing encryption scheme can not only enhance the security level of metasurface encryption, but also increase the number of information channels by predefining camouflage information. We believe that it has important potential applications in large-capacity optical encryption and information storage.

Electrospun glass nanofibers to strengthen polycarbonate plastic glass toward photoluminescent smart materials

Electrospun glass nanofibers (GNFs) were used to strengthen polycarbonate (PC) to create long-persistent photoluminescent and fluorescent smart materials such as afterglow concrete and smart window. Physical integration of lanthanide-activated aluminate (LA) nanoparticles (NPs) yielded transparent GNFs@PC smart sheets. Spectral investigations utilizing photoluminescence and CIE Lab parameters were performed to confirm that the translucent appearance of GNFs@PC changed to green when exposed to UV light. This fluorescence activity was quickly reversible for the GNFs@PC hybrids with low concentrations of LANPs, which indicate fluorescence emission. Higher phosphor concentrations in GNFs@PC led to longer-lasting afterglow photoluminescence and slower reversibility. The GNFs@PC hybrids showed an emission band detected at 518 nm upon excitation at 368 nm. The morphological characteristics of LANPs and GNFs were analyzed by transmission electron microscopy (TEM), which revealed sizes of 11-26 nm and 250-300 nm, respectively. GNFs were prepared using electrospinning technology and then used as a roughening agent into PC sheets. Morphological characteristics of GNFs and GNFs@PC smart sheets were examined using energy-dispersive X-ray spectroscopy (EDXA), X-ray fluorescence (XRF) and scanning electron microscopy (SEM). The GNFs@PC smart sheets were shown to have enhanced scratch resistance in comparison to LANPs-free PC control sample. Increases in LANPs concentration enhanced both hydrophobicity and UV protection.

Chameleon-like Photoluminescent Janus Nanoparticles as Full-Color Multicomponent Organic Nanoinks: Combination of Förster Resonance Energy Transfer and Photochromism for Encryption and Anticounterfeiting with Multilevel Authentication

Increasing the security by the multilevel authentication mechanism was the most significant challenge in recent years for the development of anticounterfeiting inks based on photoluminescent nanomaterials. For this purpose, the greatest strategy is the use of multicomponent organic materials and a combination of Förster resonance energy transfer (FRET) with the intelligent behavior of photochromic compounds like spiropyran. Here, the hydroxyl-functionalized polymer nanoparticles were synthesized by emulsion copolymerization of methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA) in different compositions (0-30 wt % of HEMA). Results illustrated that the size of the nanoparticles changed from 64 to 204 nm, and a morphology evolution from spherical to Janus shape was observed by increasing the concentration of HEMA. Photoluminescent inks with red, green, and blue (RGB) fluorescence emissions were prepared by modification of nanoparticles containing 15 wt % of HEMA with spiropyran, fluorescein, and coumarin, respectively. To develop dual-color and multicolor photoluminescent inks that display static and dynamic emission, RGB latex samples were mixed together in different ratios and printed on cellulosic paper. Results display that the fluorescence emission of developed inks can be photoswitched between different statuses, including white to blue, green to blue, green to red/orange, purple to pink, and white to pink, utilizing the FRET phenomenon, photochromism, and a combination of both phenomena. Samples containing spiropyran displayed dynamic color changes in the emission to red, orange, and pink depending on the composition. Hence, developed dual-color and multicolor photoluminescent inks were used for printing of security tags and also painting of some hand-drawn artworks, which obtained results indicating high printability, maximum fluorescence intensity, high resolution, and fast responsivity upon UV-light irradiations of 254 nm (for static mode) and 365 nm (for dynamic mode). In addition, the multilevel authentication mechanism by a static emission under UV-light irradiation of 254 nm, a dynamic emission under UV-light irradiation of 365 nm, and photochromic color change was observed, resulting in increasing the security of developed inks. Actually, developed multicolor photoluminescent inks are the most efficient candidates for developing a new category of chameleon-like high-security anticounterfeiting inks that have tunable optical properties and complex multilevel authentication mechanisms.

Visualizing temperature inhomogeneity using thermo-responsive smart materials

Despite the substantial progress made, the responsiveness of thermo-responsive materials upon various thermal fields is still restricted to monochromatic visualization with single-wavelength light emission. This stems from a poor understanding of the photophysical processes within the materials and the unvarying optical performance of luminescent centers' response to various ambient temperatures. Conventional techniques to assess the inhomogeneities of thermal fields can be time-consuming, require specialized equipment and suffer from inaccuracy due to the inevitable interference from background signals, especially at high temperature. To this end, we overcome these limitations for the first time, to flexibly visualize temperature inhomogeneities by developing a thermochromic smart material, SrGa12-xAlxO19:Dy3+. Two distinct modes of thermochromic properties (steady-state temperature-dependent luminescence and thermally stimulated luminescence) are investigated. It is revealed that the abundant colors (from yellow, green to red) and amazing color-changing features are due to the superior optical integration of the host (SrGa12-xAlxO19) and dopant (Dy3+) emissions under specific thermal stimulations. We suggest that this thermo-responsive smart material can be used to realize highly efficient and simple visualization of invisible thermal distribution in industry and beyond.

Raman encoding for security labels: a review

Owing to its excellent multiplexing ability, high stability, and molecular fingerprint characteristics, Raman encoding has been widely used in security labels for medical safety, jewelry identification and food supervision. Various growing demands have promoted the anti-counterfeiting mode of security labels based on Raman encoding from the classic one that relies on specific patterns to the more secure one that depends on random patterns. As impressive progress has been made in Raman encoding for security labels in recent years, this review attempts to comprehensively cover security labels based on Raman encoding, from label preparation to image verification. For the labels with different anti-counterfeiting modes, the different basic elements they need are summarized, and the role of Raman encoding in different modes is introduced. In addition, security labels based on Raman encoding still have some drawbacks. Therefore, suggestions on how to improve its anti-counterfeiting performance are also discussed, as well as future challenges and prospects.

Electron-Withdrawing Substituents Allow Boosted NIR-II Fluorescence in J-Type Aggregates for Bioimaging and Information Encryption

Developing molecular fluorophores with enhanced fluorescence in aggregate state for the second near-infrared (NIR-II) imaging is highly desirable but remains a tremendous challenge due to the lack of reliable design guidelines. Herein, we report an aromatic substituent strategy to construct highly bright NIR-II J-aggregates. Introduction of electron-withdrawing substituents at 3,5-aryl and meso positions of classic boron dipyrromethene (BODIPY) skeleton can promote slip-stacked J-type arrangement and further boost NIR-II fluorescence of J-aggregates via increased electrostatic repulsion and intermolecular hydrogen bond interaction. Notably, NOBDP-NO2 with three nitro groups (-NO2 ) shows intense NIR-II fluorescence at 1065 nm and high absolute quantum yield of 3.21 % in solid state, which can be successfully applied in bioimaging, high-level encoding encryption, and information storage. Moreover, guided by this electron-withdrawing substituent strategy, other skeletons (thieno-fused BODIPY, aza-BODIPY, and heptamethine cyanine) modified with -NO2 are converted into J-type aggregates with enhanced NIR-II fluorescence, showing great potential to convert aggregation caused emission quenching (ACQ) dyes into brilliant J-aggregates. This study provides a universal method for construction of strong NIR-II emissive J-aggregates by rationally manipulating molecular packing and establishing relationships among molecular structures, intermolecular interactions, and fluorescence properties.

Multiple-Channel Information Encryption Based on Quantum Dot Absorption Spectra

Large-capacity information encryption has attracted significant interest in the information age. The diversity and controllability of spectra have positioned them to be widely applied for information encryption. Current spectra-based information encryption methods commonly rely on either spectral alteration induced by external stimuli or the utilization of narrowband channels within spectra. However, these methods encounter a common challenge in attaining both high security and large capacity simultaneously. To address these issues, we propose a multiple-channel information encryption system based on quantum dot (QD) absorption spectra. The diversity of QD absorption spectra and their broadband features ensure that the encrypted spectra can hardly be decrypted without knowing the correct channel matrix. Meanwhile, the large capacity is realized through the combination of multiple QD spectral channels with a theoretical maximum capacity of 24.0 bits in a single spectrum. In order to optimize the performance of our proposed system, the selection principle of the channel matrix is established to achieve the rapid identification of the optimal channel matrix in several milliseconds. The additivity of QD spectral channels and the consistency of QD spectra are also explored to minimize the impact of errors on information decryption. Furthermore, two spectral encryption scenarios of spatial pattern and spectral pattern are applied to demonstrate the feasibility, showcasing their ability to achieve both a high level of security and large capacity. Owing to the advantages offered by QD spectra, the QD spectra-based information system exhibits excellent potential for broader applications in information storage, authentication, and computing.

Pyrazine as a More Efficient Luminophore than Benzene for Producing Red-Shifted and Enhanced Photoluminescence

The development of organic photoluminescent (PL) materials with red-shifted and enhanced emissions is beneficial to promoting their applications. Luminescent materials based on aromatic heterocycles (e.g., pyrazine) usually have red-shifted and enhanced photoluminescence compared with phenyl-based luminescent materials. In this work, the photoluminescence behaviors of pyrazine and its derivatives (o-dichloro-, o-dicyano-, and dichlorodicyano-substituted) are compared with those of benzene and its derivatives. All compounds exhibit fluorescence emissions ranging from blue to yellow, and the fluorescence emissions of pyrazinyl compounds are more red-shifted than those of phenyl compounds. Except for the o-dicyano-substituted compound, pyrazinyl compounds exhibit stronger fluorescence emissions than corresponding phenyl compounds in both pure substances and ethanol solutions. In addition, both 5,6-dichloro-2,3-dicyanopyrazine (P4) and 4,5-dichloro-1,2-dicyanobenzene (B4) exhibit room temperature phosphorescence, and the maximum delayed emission wavelength is red-shifted from 575 nm of B4 to 637 nm of P4. The energy gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the monomers of pyrazinyl compounds are reduced by 0.07-1.37 eV compared with the monomers of phenyl compounds, which is the fundamental reason for the red-shifted emissions of the pyrazinyl compounds. Moreover, compared to B4, the smaller molecular spacing in the P4 crystal structure facilitates interlayer electron transfer and hence the formation of more extended through-space conjugation, resulting in the red-shifted emission of P4. This work proves that pyrazine is a more efficient luminophore than benzene for constructing PL compounds with longer emission wavelengths and higher quantum yields, which are important in guiding the design and preparation of organic PL materials.

Bioinspired thermadapt shape-memory polymer with light-induced reversible fluorescence for rewritable 2D/3D-encoding information carriers

Fluorescent materials have attracted widespread attention for information encryption owing to their stimuli-responsive color-shifting. However, the 2D encoding of fluorescent images poses a risk of information leakage. Herein, inspired by the mimic octopus capable of camouflage by changing colors and shapes, we develop a thermadapt shape-memory fluorescent film (TSFF) for integrating 2D/3D encoding in one system. The TSFF is based on anthracene group with reversible photo-cross-linking and poly (ethylene-co-vinyl acetate) network with thermadapt shape-memory properties. The reversible photo-cross-linking of anthracene is accompanied by repeatable fluorescence-shifting and enables rewritable 2D encoding. Meanwhile, the thermadapt shape-memory properties not only enables the reconfiguration of the permanent shape for creating and erasing 3D patterns, i.e., rewritable 3D information, but also facilitates recoverable shape programming for 3D encoding. This rewritable 2D/3D encoding strategy can enhance information security because only designated inspectors can decode the information by providing sequential heating for shape recovery and UV exposure. Overall, TSFF capable of rewritable 2D/3D encoding will inspire the design of smart materials for high-security information carriers.

Acid-base responsive multifunctional poly(formyl sulfide)s through a facile catalyst-free click polymerization of aldehyde-activated internal diynes and dithiols

Acid-base equilibria play a critical role in biological processes and environmental systems. The development of innovative fluorescent polymeric materials to monitor acid-base equilibria is highly desirable. Herein, a novel catalyst-free click polymerization of aldehyde-activated internal diynes and dithiols was established, and exclusively Markovnikov poly(formyl sulfide)s (PFSs) with high molecular weights and moderate stereoregularity were produced in high yields. Because of the aromatic units and sulfur atoms in their main chains, these polymers possessed high refractive index values. By introducing the fluorene and aldehyde moieties, the resulting PFSs could act as a fluorescent sensor for sensitive hydrazine detection. Taking advantage of the reaction of the aldehyde group and hydrazine, imino-PFSs with remarkable and reversible fluorescence change through alternating fumigation with HCl and NH3 were easily acquired and further applied in multicolor patterning, a rewritable material and quadruple-mode information encryption. Additionally, a test strip of protonated imino-polymer for the tracking of bioamines in situ generated from marine product spoilage was also demonstrated. Collectively, this work not only provides a powerful click polymerization to enrich the multiplicity of sulfur-containing materials, but also opens up enormous opportunities for these functional polysulfides in diverse applications.

Nano-Additive Manufacturing and Non-Destructive Testing of Nanocomposites

In the present work, the recent advancements in additive manufacturing (AM) techniques for fabricating nanocomposite parts with complex shaped structures are explained, along with defect non-destructive testing (NDT) methods. A brief overview of the AM processes for nanocomposites is presented, grouped by the type of feedstock used in each technology. This work also reviews the defects in nanocomposites that can affect the quality of the final product. Additionally, a detailed description of X-CT, ultrasonic phased array technology, and infrared thermography is provided, highlighting their potential application in non-destructive inspection of nanocomposites in the future. Lastly, it concludes by offering recommendations for the development of NDT methods specifically tailored for nanocomposites, emphasizing the need to utilize NDT methods for optimizing nano-additive manufacturing process parameters, developing new NDT techniques, and enhancing the resolution of existing NDT methods.

Phosphorescence enhancement of pyridinium macrocycles by poly(vinylalcohol)

A phosphorescence enhancement of pyridinium macrocycle/monomer phosphors is realized with up to 14.7-fold prolonging of the phosphorescence lifetimes and visible afterglow by doping into a poly(vinylalcohol) (PVA) matrix. The abundant hydrogen-bonding interactions and electrostatic interactions between the phosphors and the PVA suppressed the nonradiative decay processes, slowed down the radiative decay and nonradiative decay of triplet states, and therefore promoted the long-lived RTP.

New cationic spiropyrans with photoswitchable NIR fluorescence

Visible-light-mediated photochromic compounds with NIR absorption and fluorescence are of great interest for use in different biomedical applications. In this work, new representatives of spiropyrans with conjugated cationic 3H-indolium substituents in different positions of 2H-chromene moiety were synthesized. The electron-donating methoxy groups were introduced in the uncharged indoline and charged indolium cycles to form the effective conjugation chain between the hetarene moiety and the cationic fragment for reaching NIR absorption and fluorescence. The molecular structure and the effects of cationic fragment position on the mutual stability of the spirocyclic and merocyanine forms of compounds were carefully studied in the solutions and solid state by NMR, IR, HRMS, single-crystal XRD, and quantum chemical calculations. It was found that the obtained spiropyrans demonstrate positive or negative photochromism depending on the cationic fragment's position. One of spiropyrans has shown bidirectional photochromic properties induced exclusively by visible light of different wavelengths in both directions. The photoinduced merocyanine forms of compounds possessed far-red shifted absorption maxima and NIR fluorescence, which makes them prospective fluorescent probes for bioimaging.

Multi-Stimuli-Responsive Chromic Behaviors of an All-in-One Viologen-Based Cd(II) Complex

A one-dimensional Cd(II) chain coordination polymer constructed by an electron-deficient viologen-anchored carboxylate ligand was successfully synthesized. Owing to the favorable stimuli-chromic properties of viologen, the title compound shows reversible photochromism, thermochromism, electrochromism, and naked-eye-detectable differentiable vapochromic response to different volatile amines. The chromic behaviors of it are ascribed to the formation of viologen radicals triggered by external stimuli. And the differentiated response to volatile amines is attributed to the size effect of the amines as well as the steric hindrance effect of forming α/β Cv-H···Namines interactions of the viologen unit to further affect the occurrence of electron transfer. Such an all-in-one crystalline material might have more practical applications in photoelectric, erasable inkless printing, light printing, and volatile amine detection fields.

General Synthesis of Carbon Dot-Based Composites with Triple-Mode Luminescence Properties and High Stability

Carbon dot (CD)-based luminescent materials have attracted great attention in optical anti-counterfeiting due to their excellent photophysical properties in response to ultraviolet-to-visible excitation. Hence, there is an urgent need for the general synthesis of CD-based materials with multimode luminescence properties and high stability; however, their synthesis remains a formidable challenge. Herein, CDs were incorporated into a Yb,Tm-doped YF3 matrix to prepare CDs@YF3:Yb,Tm composites. The YF3 plays a dual role, not only serving as a host for fixing rare earth luminescent centers but also functioning as a rigid matrix to stabilize the triplet state of the CDs. Under the excitation of 365 nm ultraviolet light and 980 nm near-infrared light, CDs@YF3:Yb,Tm exhibited blue fluorescence and green room-temperature phosphorescence of CDs and upconversion luminescence of Tm3+, respectively. Due to the strong protection of the rigid matrix, the stability of CDs@YF3:Yb,Tm is greatly improved. This work provides a general synthesis strategy for achieving multimode luminescence and high stability of CD-based luminescent materials and offers opportunities for their applications in advanced anti-counterfeiting and information encryption.

Non-Conjugated Bis-(Dithienylethene)-Naphthalenediimide as a Dynamic Anti-Counterfeiting Agent: Driving the Wheel of Photoswitching Enactment

Photochromic fluorescent molecules dramatically extend their fields of applications ranging from optical memories, bioimaging, photoswitches, photonic devices, anti-counterfeiting technology and many more. Here, we have logically designed and synthesized a triazole appended bis-(dithienylethene)-naphthalenediimide based photo-responsive material, 5, which demonstrated fluorescence enhancement property upon photocyclization (ΦF =0.42), with high photocyclization (44 s, ksolution =0.0355 s-1 , ksolid =0.0135 s-1 ) and photocycloreversion (160 s, ksolution =0.0181 s-1 , ksolid =0.0085 s-1 ) rate and decent photoreaction quantum yield (Φo→c =0.93 and Φc→o =0.11). The open isomer almost converted to the closed isomer at photo-stationary state (PSS) with distinct color change from colorless to blue with 92.85 % conversion yield. A reversible noninvasive modulation of fluorescence through efficient photoinduced electron transfer (PET) process was observed both in solution as well as in solid state. The fluorescence modulation through PET process was further corroborated with thermodynamic calculations using the Rehm-Weller equation and quantum chemical studies (DFT). The thermally stable compound 5 exhibits high fatigue resistance property (up to 50 cycles) both in solution and solid state. Furthermore, the compound 5 was successfully applied as erasable ink and in deciphering secret codes (Quick Response/bar code) portending potential promising application in anti-counterfeiting.

Hydrochromic Perovskite System with Reversible Blue-Green Color for Advanced Anti-Counterfeiting

The intrinsic instability of halide perovskites toward to external stimulus, has created a competitive advantage for designing stimuli-responsive materials. However, the external environment tuning reversibly fluorescence emission of perovskite system is still limited. In this work, humidity is verified to act as a new option to modulate the emission properties of mixed-halide perovskite. The perovskite nanocrystals (PNCs) photoirradiated in dichloromethane are easily and stably redispersed in water, and emit bright fluorescence which is quite different from the original. Moreover, the perovskites confined on glass slide can reversibly switch their fluorescence between blue and green colors under moisture. It is demonstrated that the factors of different solubilities of CsCl and CsBr in water, the structural transformation of perovskites and the confine of glass matrix play key roles in the reversible transformation. Finally, the combination of hydrochromic CsPb(Brx Cly )3 and water-resistant CsPb(Brx Cly )3 -polymethyl methacrylate have been applied in advanced anti-counterfeiting, which greatly improves the information security. This work not only give an insight into the effects of humidity on fluorescence and structures of PNCs, but also offer a new class of hydrochromic PNCs materials based on reversible emission transformation for potential application in sensors, anti-counterfeiting and information encryption.

Multiscale photoacoustic tomography using reversibly switchable thermochromics

SIGNIFICANCE

Based on acoustic detection of optical absorption, photoacoustic tomography (PAT) allows functional and molecular imaging beyond the optical diffusion limit with high spatial resolution. However, multispectral functional and molecular PAT is often limited by decreased spectroscopic accuracy and reduced detection sensitivity in deep tissues, mainly due to wavelength-dependent optical attenuation and inaccurate acoustic inversion.

AIM

Previous work has demonstrated that reversible color-shifting can drastically improve the detection sensitivity of PAT by suppressing nonswitching background signals. We aim to develop a new color switching-based PAT method using reversibly switchable thermochromics (ReST).

APPROACH

We developed a family of ReST with excellent water dispersion, biostability, and temperature-controlled color changes by surface modification of commercial thermochromic microcapsules with the hydrophilic polysaccharide alginate.

RESULTS

The optical absorbance of the ReST was switched on and off repeatedly by modulating the surrounding temperature, allowing differential photoacoustic detection that effectively suppressed the nonswitching background signal and substantially improved image contrast and detection sensitivity. We demonstrate reversible thermal-switching imaging of ReST in vitro and in vivo using three PAT modes at different length scales.

CONCLUSIONS

ReST-enabled PAT is a promising technology for high-sensitivity deep tissue imaging of molecular activity in temperature-related biomedical applications, such as cancer thermotherapy.

Stepwise Stimuli-Responsive, Multicolor-Chromic Perylene Bisimide/Polyvinyl Alcohol Co-assembly System for Information Encryption

The issue of information security has become a concern in all aspects of daily life, prompting the development of encryption technologies. Therein, optical encryption using color/graphical patterns holds great potential. However, current approaches generally rely on monochromic change upon one or more stimuli, limiting their further application in advanced confidential encryption. Herein, we propose a delicate strategy based on a co-assembly system of perylene bisimides (PBI)/polyvinyl alcohol (PVA) that demonstrates stepwise stimuli response and multicolor changes. The color of the supramolecular system changes from red to purple under the stimulus of UV light, and to orange when exposed to water. The multidimensional chromic response is achieved by an evolution process including the generation, packing rearrangement and quenching of PBI radical anions/dianions. With the virtues of photo- and hydrochromism, this novel co-assembly system was successfully employed for advanced anticounterfeiting and versatile information encryption applications.

Ionic Microgel Colloidal Crystals: Responsive Chromism in Dual Physical and Chemical Colors for High-End Information Security and Encryption

Chromic materials play a decisive and escalating role in information security. However, it is challenging to develop chromic materials for encryption technologies that can hardly be imitated. Inspired by versatile metachrosis in nature, a series of coumarin-based 7-(6-bromohexyloxy)-coumarin microgel colloidal crystals (BrHC MGCC) with multiresponsive chromism are able to be assembled by ionic microgels in poly(vinyl alcohol) (PVA) solution followed by two cycles of freezing-thawing. The ionic microgels can be finely tailored by in situ quaternization with tunable size under varied temperatures and hydration energies of counterions as well as quenched luminescence under UV irradiation, which endows BrHC MGCC with intriguing chromism in the dual-channel coloration of physical structural color and chemical fluorescent color. Three types of BrHC MGCC exhibit various change ranges in structural coloration and similar quenching in fluorescence emission, which can be utilized for the development of the static-dynamic combined anticounterfeiting system with dual coloration. The information conveyed by the BrHC MGCC array presents dynamic variation versus temperature, while the static information can be only integrally read in both sunlight and a 365 nm UV lamp. The fabrication of a microgel colloidal crystal with dual coloration opens a facile and ecofriendly window for multilevel information security, camouflage, and a cumbersome authentication process.

Synthesis of Near-Infrared-Absorbing Anionic Heptamethine Cyanine Dyes with Trifluoromethyl Groups

A novel anionic heptamethine cyanine (HMC) dye with two trifluoromethyl groups that selectively absorb near-infrared light is synthesized. When contrasted with previously studied anionic HMC dyes with substituents such as methyl, phenyl, and pentafluorophenyl groups, the trifluoromethylated dye displays a red-shifted maximum absorption wavelength (for instance, 948 nm in CH₂Cl₂) along with enhanced photostability. Furthermore, HMC dyes with broad absorption in the near-infrared region are synthesized by combining a trifluoromethylated anionic HMC dye with a cationic HMC dye as a counterion.

A Strategic Approach to Design Multi-Functional RGB Luminescent Security Pigment Based Golden Ink with Myriad Security Features to Curb Counterfeiting of Passport

Authentication and verification of the most important government issued identity proof, i.e. passport has become more complex and challenging in the last few decades due to various innovations in ways of counterfeiting by fraudsters. Here, the aim is to provide more secured ink without altering its golden appearance in visible light. In this panorama, a novel advanced multi-functional luminescent security pigment (MLSP) based golden ink (MLSI) is developed that provides an optical authentication and information encryption features to protect the legitimacy of the passport. The advanced MLSP is derived from the ratiometric combination of different luminescent materials to form a single pigment which emits red (620 nm), green (523 nm) and blue (474 nm), when irradiated via 254, 365 and 980 nm NIR wavelengths, respectively. It also includes magnetic nanoparticles to generate magnetic character recognition feature. The MLSI has been fabricated to examine its printing feasibility and stability over different substrates using the conventional screen-printing technique against harsh chemicals and under different atmospheric conditions. Hence, these advantageous multi-level security features with golden appearance in visible light is a new breakthrough toward curbing the counterfeiting of passport as well as bank cheques, government documents, pharmaceuticals, military equipment, and many more.

Photochromic Tungsten Oxide Quantum Dots-based Fluorescent Photoswitches towards Dual-mode Anti-counterfeiting Application

Development of new anti-counterfeiting technology to increase the difficulty of imitation and decoding is becoming increasingly important, but still remains challenging yet. In this work, we report the design of new fluorescence photoswitches based on photochromic tungsten oxide quantum dots (WO₃ QDs) for dual-mode anti-counterfeiting applications. Complexing photochromic WO₃ QDs with fluorescent gold nanoclusters (AuNCs) enables the construction of a photoswitchable fluorescence system (WO₃-AuNCs) based on fluorescence resonance energy transfer. Detailed spectral and photophysical characterization showed that WO₃ QDs well-retain the photochromic properties within the WO₃-AuNCs composite. Importantly, photoresponsive and highly reversible switching of both color and fluorescence signals was successfully achieved by simply alternating the irradiation with UV and visible light. Potential utility of photoswitchable WO₃-AuNCs composite as novel dual-mode anti-counterfeiting materials has been successfully demonstrated, including photoswitchable ink, rewritable paper and number encryption. Compared with other anti-counterfeiting materials, the present photochromic WO₃ QDs-based fluorescent switches are easily synthesized and handled, and they can provide dual security mode (color and fluorescence). This work provides a generable WO₃ QDs-assisted strategy of fabricating advanced fluorescence photoswitches for versatile optical counterfeiting applications.

Multimodal dynamic and unclonable anti-counterfeiting using robust diamond microparticles on heterogeneous substrate

The growing prevalence of counterfeit products worldwide poses serious threats to economic security and human health. Developing advanced anti-counterfeiting materials with physical unclonable functions offers an attractive defense strategy. Here, we report multimodal, dynamic and unclonable anti-counterfeiting labels based on diamond microparticles containing silicon-vacancy centers. These chaotic microparticles are heterogeneously grown on silicon substrate by chemical vapor deposition, facilitating low-cost scalable fabrication. The intrinsically unclonable functions are introduced by the randomized features of each particle. The highly stable signals of photoluminescence from silicon-vacancy centers and light scattering from diamond microparticles can enable high-capacity optical encoding. Moreover, time-dependent encoding is achieved by modulating photoluminescence signals of silicon-vacancy centers via air oxidation. Exploiting the robustness of diamond, the developed labels exhibit ultrahigh stability in extreme application scenarios, including harsh chemical environments, high temperature, mechanical abrasion, and ultraviolet irradiation. Hence, our proposed system can be practically applied immediately as anti-counterfeiting labels in diverse fields.

Synthesis of a quinoxaline-hydrazinobenzothiazole based probe-single point detection of Cu2+, Co2+, Ni2+ and Hg2+ ions in real water samples

A novel quinoxaline-hydrazinobenzothiazole based sensor was synthesized and characterized using NMR, FTIR, and Mass spectroscopy techniques. The sensor achieves the distinct "single-point" colorimetric and fluorescent detection of Cu²⁺, Co²⁺, Ni²⁺ and Hg²⁺ ions with distinguishable color changes from yellow to red, pale red, pale brown and orange, respectively. The UV-visible and fluorescence emission spectral investigation revealed the excellent single-point sensing ability of the probe towards four different heavy metal ions with a ratiometric response. Nanomolar levels of detection of about 1.16 × 10^-7 M, 9.92 × 10^-8 M, 8.21 × 10^-8 M, and 1.14 × 10^-7 M for Cu²⁺, Co²⁺, Ni²⁺ and Hg²⁺ ions, respectively, were achieved using our sensor, which are below the US-EPA permissible limits. Additionally, the sensor was utilized for naked eye detection under normal daylight. Quantitative determination of the metal ions in real water samples was also demonstrated.

Orthogonal Photochemistry toward Direct Encryption of a 3D-Printed Hydrogel

Encryption technologies are essential for information security and product anti-counterfeiting, but they are typically restricted to planar surfaces. Encryption on complex 3D objects offers great potential to further improve security. However, it is rarely achieved owing to the lack of encoding strategies for nonplanar surfaces. Here, an approach is reported to directly encrypt on a 3D-printed object employing orthogonal photochemistry. In this system, visible light photochemistry is used for 3D printing of a hydrogel, and ultraviolet light is subsequently employed to activate its geometrically complex surface through the dissociation of ortho-nitrobenzyl ester units in a spatioselective manner for information coding. This approach offers a new way for more reliable encryption, and the underlying orthogonal photochemistry can be extended toward functional modification of 3D-printed products beyond information protection.

Synthesis and Application of Fluorescent Polymer Micro- and Nanoparticles

Fluorescent polymer particles have witnessed an increasing interest in recent years, owing to their fascinating physicochemical properties as well as wide-ranging applications. In this review, the state-of-the-art research progress of fluorescent polymer particles in the past five years is summarized. First, the synthesis protocols for fluorescent polymer particles, including emulsion polymerization, precipitation polymerization, dispersion polymerization, suspension polymerization, nanoprecipitation, self-assembly, and post-polymerization modification, are presented in detail. Then, the applications of the resulting beguiling particles in anticounterfeiting, chemical sensing, and biomedicine, are illustrated. Finally, the challenges and opportunities that exist in the field are pointed out. This review aims to offer important guidance and stimulate more research attention to this rapidly developing field.