1
|
Mandin S, Metilli L, Karrouch M, Lancelon-Pin C, Putaux JL, Chèvremont W, Paineau E, Hengl N, Jean B, Pignon F. Chiral nematic nanocomposites with pitch gradient elaborated by filtration and ultraviolet curing of cellulose nanocrystal suspensions. Carbohydr Polym 2024; 337:122162. [PMID: 38710556 DOI: 10.1016/j.carbpol.2024.122162] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2024] [Revised: 03/15/2024] [Accepted: 04/11/2024] [Indexed: 05/08/2024]
Abstract
An innovative method combining frontal filtration with ultraviolet (UV) curing has been implemented to design cellulosic nanocomposite films with controlled anisotropic textures from nanometric to micrometric length scales. Namely, an aqueous suspension containing poly (ethylene glycol) diacrylate polymer (PEGDA) as a photocurable polymer and cellulose nanocrystals (CNCs) at a 70/30 mass ratio was processed by frontal filtration, followed by in-situ UV-curing in a dedicated cell. This procedure allowed designing nanocomposite films with highly oriented and densely-packed CNCs, homogeneously distributed in a PEGDA matrix over a thickness of ca. 500 μm. The nanocomposite films were investigated with small-angle X-ray scattering (SAXS), by raster-scanning along their height with a 25 μm vertically-collimated X-ray beam. The CNCs exhibited a high degree of orientation, with their director aligned parallel to the membrane surface, combined with an increase in the degree of alignment as concentration increased towards the membrane surface. Scanning electron microscopy images of fractured films showed the presence of regularly spaced bands lying perpendicular to the applied transmembrane pressure, highlighting the presence of a chiral nematic (cholesteric) organization of the CNCs with a pitch gradient that increased from the membrane surface to the bulk.
Collapse
Affiliation(s)
- S Mandin
- Univ. Grenoble Alpes, CNRS, Grenoble INP (Institute of Engineering Univ. Grenoble Alpes), LRP, F-38000 Grenoble, France
| | - L Metilli
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000 Grenoble, France
| | - M Karrouch
- Univ. Grenoble Alpes, CNRS, Grenoble INP (Institute of Engineering Univ. Grenoble Alpes), LRP, F-38000 Grenoble, France
| | - C Lancelon-Pin
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000 Grenoble, France
| | - J-L Putaux
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000 Grenoble, France
| | - W Chèvremont
- ESRF, The European Synchrotron, CS 40220, F-38043 Grenoble Cedex 9, France
| | - E Paineau
- Université Paris Saclay, CNRS, Laboratoire de Physique des Solides, 91405 Orsay Cedex, France
| | - N Hengl
- Univ. Grenoble Alpes, CNRS, Grenoble INP (Institute of Engineering Univ. Grenoble Alpes), LRP, F-38000 Grenoble, France
| | - B Jean
- Univ. Grenoble Alpes, CNRS, CERMAV, F-38000 Grenoble, France
| | - F Pignon
- Univ. Grenoble Alpes, CNRS, Grenoble INP (Institute of Engineering Univ. Grenoble Alpes), LRP, F-38000 Grenoble, France.
| |
Collapse
|
2
|
Wang R, He H, Tian J, Chodankar S, Hsiao BS, Rosén T. Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:13319-13329. [PMID: 38859701 PMCID: PMC11210288 DOI: 10.1021/acs.langmuir.4c01846] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/16/2024] [Revised: 06/01/2024] [Accepted: 06/03/2024] [Indexed: 06/12/2024]
Abstract
Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.
Collapse
Affiliation(s)
- Ruifu Wang
- Department
of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United
States
| | - HongRui He
- Department
of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United
States
| | - Jiajun Tian
- Department
of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United
States
| | - Shirish Chodankar
- National
Synchrotron Light Source II, Brookhaven
National Laboratory, Upton, New York 11793-5000, United States
| | - Benjamin S. Hsiao
- Department
of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United
States
| | - Tomas Rosén
- Department
of Fiber and Polymer Technology and Wallenberg Wood Science Center, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden
| |
Collapse
|
3
|
Sun W, Song Z, Wang J, Yi Z, He M. Preparation of patterned hydrogels for anti-counterfeiting and directional actuation by shear-induced orientation of cellulose nanocrystals. Carbohydr Polym 2024; 332:121946. [PMID: 38431424 DOI: 10.1016/j.carbpol.2024.121946] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2023] [Revised: 01/23/2024] [Accepted: 02/10/2024] [Indexed: 03/05/2024]
Abstract
Hydrogels with anisotropic structures are of great interest in the fields of bionic actuators, sensing and anti-counterfeiting due to their unique optical and stimulus response properties. Here we report an anisotropic cellulose nanocrystals/polyacrylamide (CNC/PAM) hydrogel with a patterned structure obtained by shear-induced orientation of CNC in precursor solution. Due to the difference in affinity between different slider surfaces and the precursor, patterned structures with different interference colors were realized by adhering the polypropylene (PP) film with a specific pattern to the bottom glass slider, which leads to differences in CNC orientation in different areas. These interfere color patterns can only be observed between crossed polarization, allowing the hydrogel to be used in applications of anti-counterfeiting and information encryption. Moreover, a complex and controllable 3D deformation is realized by introducing "zebra crossing" structure in the hydrogel. The opening and closing processes of flowers are vividly mimicked using the reversible swelling and shrinking properties of hydrogels in water and salt solutions, making the hydrogel promising for soft actuators.
Collapse
Affiliation(s)
- Wen Sun
- College of Science, Nanjing Forestry University, Nanjing 210037, China
| | - Zengbin Song
- College of Science, Nanjing Forestry University, Nanjing 210037, China
| | - Jian Wang
- College of Science, Nanjing Forestry University, Nanjing 210037, China
| | - Zhaodi Yi
- College of Science, Nanjing Forestry University, Nanjing 210037, China
| | - Ming He
- College of Science, Nanjing Forestry University, Nanjing 210037, China.
| |
Collapse
|
4
|
Zhou M, Chen D, Chen Q, Chen P, Song G, Chang C. Reversible Surface Engineering of Cellulose Elementary Fibrils: From Ultralong Nanocelluloses to Advanced Cellulosic Materials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2312220. [PMID: 38288877 DOI: 10.1002/adma.202312220] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/15/2023] [Revised: 01/24/2024] [Indexed: 02/29/2024]
Abstract
Cellulose nanofibrils (CNFs) are supramolecular assemblies of cellulose chains that provide outstanding mechanical support and structural functions for cellulosic organisms. However, traditional chemical pretreatments and mechanical defibrillation of natural cellulose produce irreversible surface functionalization and adverse effects of morphology of the CNFs, respectively, which limit the utilization of CNFs in nanoassembly and surface functionalization. Herein, this work presents a facile and energetically efficient surface engineering strategy to completely exfoliate cellulose elementary fibrils from various bioresources, which provides CNFs with ultrahigh aspect ratios (≈1400) and reversible surface. During the mild process of swelling and esterification, the crystallinity and the morphology of the elementary fibrils are retained, resulting in high yields (98%) with low energy consumption (12.4 kJ g-1). In particular, on the CNF surface, the surface hydroxyl groups are restored by removal of the carboxyl moieties via saponification, which offers a significant opportunity for reconstitution of stronger hydrogen bonding interfaces. Therefore, the resultant CNFs can be used as sustainable building blocks for construction of multidimensional advanced cellulosic materials, e.g., 1D filaments, 2D films, and 3D aerogels. The proposed surface engineering strategy provides a new platform for fully utilizing the characteristics of the cellulose elementary fibrils in the development of high-performance cellulosic materials.
Collapse
Affiliation(s)
- Meng Zhou
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-based Medical Materials in Hubei Province, and Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei, 430072, P. R. China
| | - Dongzhi Chen
- State Key Laboratory of New Textile Materials and Advanced Processing Technology, Wuhan Textile University, Wuhan, 430073, P. R. China
| | - Qianqian Chen
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-based Medical Materials in Hubei Province, and Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei, 430072, P. R. China
| | - Pan Chen
- School of Materials Science and Engineering, Beijing Institute of Technology, Beijing, 100081, P. R. China
| | - Guangjie Song
- Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
| | - Chunyu Chang
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-based Medical Materials in Hubei Province, and Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei, 430072, P. R. China
| |
Collapse
|
5
|
Chinnappa K, Bai CDG, Srinivasan PP. Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024; 31:30288-30322. [PMID: 38619767 DOI: 10.1007/s11356-024-33105-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2023] [Accepted: 03/22/2024] [Indexed: 04/16/2024]
Abstract
Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.
Collapse
Affiliation(s)
- Karthik Chinnappa
- Department of Biotechnology, St. Joseph's College of Engineering, OMR, Chennai, 600119, Tamil Nadu, India
| | | | - Pandi Prabha Srinivasan
- Department of Biotechnology, Sri Venkateswara College of Engineering, Sriperumbudur Taluk, Chennai, 602117, Tamil Nadu, India
| |
Collapse
|
6
|
Lu Y, Li Z, Li Z, Zhou S, Zhang N, Zhang J, Zong L. Fabrication of a tough, long-lasting adhesive hydrogel patch via the synergy of interfacial entanglement and adhesion group densification. NANOSCALE 2024; 16:645-656. [PMID: 38088254 DOI: 10.1039/d3nr05049a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/04/2024]
Abstract
Adhesive hydrogels (AHs) are considered ideal materials for flexible sensors. However, the lack of effective energy dissipation networks and sparse surface polar groups in AHs lead to poor mechanical properties and interfacial adhesion, which limit their practical application. Herein, a tough, long-lasting adhesive and highly conductive nanocomposite hydrogel (PACPH) was fabricated via the synergy of interfacial entanglement and adhesion group densification. PACPH was obtained by the in situ polymerization of highly carboxylated cellulose nanocrystals (SCNCPA, surface pre-grafted polyacrylic acid chains, C-COOH = 11.5 mmol g-1) with the acrylic acid precursor. The unique tacticity of SCNCPA provides strong interface entanglement and multiple hydrogen bonds with the PACPH network, which further increases the energy dissipated during SCNCPA displacements, and enhances the mechanical properties of PACPH (tensile strength = 1.45 MPa, modulus = 332 kPa, and fracture toughness = 13.2 MJ m-3). Meanwhile, SCNCPA increases the density of surface polar groups in PAPCH and also acts as an anchor point to improve the adhesion strength (>2-3 times) of PACPH on various substrates. The combination of excellent mechanical, adhesive, and conductive properties of the PAPCH-integrated patches enables long-term monitoring of human daily activities and electrocardiogram (ECG) signals, verifying that PAPCH is a promising material platform for the further development of flexible sensors and other health management devices.
Collapse
Affiliation(s)
- Yunjie Lu
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| | - Zhaohui Li
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| | - Zewei Li
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| | - Shihao Zhou
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| | - Ning Zhang
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| | - Jianming Zhang
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| | - Lu Zong
- Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, People's Republic of China.
| |
Collapse
|
7
|
Yu N, An ZW, Zhang JL, Cheng BX, Ye K, Wang S, Wu W, Li RKY, Tan X, Zhao H. Recent Advances in Tailored Fabrication and Properties of Biobased Self-Healing Polyurethane. Biomacromolecules 2023; 24:4605-4621. [PMID: 37917193 DOI: 10.1021/acs.biomac.3c00805] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2023]
Abstract
With the emergence of challenges in the environmental degradation and resource scarcity fields, the research of biobased self-healing polyurethane (BSPU) has become a prevailing trend in the technology of the polyurethane industry and a promising direction for developing biomass resources. Here, the production of BSPU from lignocellulose, vegetable oil, chitosan, collagen, and coumarin is classified, and the principles of designing polyurethane based on compelling examples using the latest methods and current research are summarized. Moreover, the impact of biomass materials on self-healing and mechanical properties, as well as the tailored performance method, are presented in detail. Finally, the applications of BSPU in biomedicine, sensors, coatings, etc. are also summarized, and the possible challenges and development prospects are explored to helpfully make progress in the development of BSPU. These findings demonstrate valuable references and practical significance for future BSPU research.
Collapse
Affiliation(s)
- Ning Yu
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
| | - Ze-Wei An
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
| | - Jia-Le Zhang
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
| | - Bing-Xu Cheng
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
| | - Kang Ye
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
| | - Shuangfei Wang
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
| | - Wei Wu
- Jihua Laboratory, Foshan, 528200, China
| | - Robert K Y Li
- Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong SAR, China
| | - Xuecai Tan
- Key Laboratory of Chemistry and Engineering of Forest Products, State Ethnic Affairs Commission, Guangxi Key Laboratory of Chemistry and Engineering of Forest Products, Guangxi Collaborative Innovation Center for Chemistry and Engineering of Forest Products, Guangxi Minzu University, Nanning, 530006, China
| | - Hui Zhao
- School of Light Industry and Food Engineering, Guangxi University, Nanning, 530004, China
- Key Laboratory of Chemistry and Engineering of Forest Products, State Ethnic Affairs Commission, Guangxi Key Laboratory of Chemistry and Engineering of Forest Products, Guangxi Collaborative Innovation Center for Chemistry and Engineering of Forest Products, Guangxi Minzu University, Nanning, 530006, China
- State Key Laboratory of Biocatalysis and Enzyme Engineering School of Life Science, Hubei University, Wuhan, 430062, China
| |
Collapse
|
8
|
Tang X, Wang Z, Wang M, Zhou S, Chen J, Xu S. Nanoarchitectonics of cellulose nanocrystal conjugated with a tetrasaccharide-glycoprobe for targeting oligodendrocyte precursor cells. Carbohydr Polym 2023; 317:121086. [PMID: 37364956 DOI: 10.1016/j.carbpol.2023.121086] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/05/2023] [Revised: 05/30/2023] [Accepted: 05/30/2023] [Indexed: 06/28/2023]
Abstract
Demyelination is a serious complication of neurological disorders, which can be reversed by oligodendrocyte precursor cell (OPC) as the available source of myelination. Chondroitin sulfate (CS) plays key roles in neurological disorders, which still attracted less attention on how CS modulates the fate of OPCs. Nanoparticle coupled with glycoprobe is a potential strategy for investigating the carbohydrate-protein interaction. However, there is lack of CS-based glycoprobe with enough chain length that interact with protein effectively. Herein, we designed a responsive delivery system, in which CS was the target molecule, and cellulose nanocrystal (CNC) was the penetrative nanocarrier. A coumarin derivative (B) was conjugated at the reducing end of an unanimal-sourced chondroitin tetrasaccharide (4mer). This glycoprobe (4B) was grafted to the surface of a rod-like nanocarrier, which had a crystalline core and a poly(ethylene glycol) shell. This glycosylated nanoparticle (N4B-P) displayed a uniform size, improved water-solubility, and responsive release of glycoprobe. N4B-P displayed strong green fluorescence and good cell-compatibility, which imaged well the neural cells including astrocytes and OPCs. Interestingly, both of glycoprobe and N4B-P were internalized selectively by OPCs when they were incubated in astrocytes/OPCs mixtures. This rod-like nanoparticle would be a potential probe for studying carbohydrate-protein interaction in OPCs.
Collapse
Affiliation(s)
- Xiaoli Tang
- School of Life Science and Health Engineering, Jiangnan University, Wuxi, China
| | - Zhuqun Wang
- School of Life Science and Health Engineering, Jiangnan University, Wuxi, China
| | - Maosen Wang
- School of Life Science and Health Engineering, Jiangnan University, Wuxi, China
| | - Shuyu Zhou
- School of Life Science and Health Engineering, Jiangnan University, Wuxi, China
| | - Jinghua Chen
- School of Life Science and Health Engineering, Jiangnan University, Wuxi, China; Key Laboratory of Carbohydrate Chemistry and Biotechnology, Ministry of Education, Jiangnan University, Wuxi, China
| | - Shuqin Xu
- School of Life Science and Health Engineering, Jiangnan University, Wuxi, China; Key Laboratory of Carbohydrate Chemistry and Biotechnology, Ministry of Education, Jiangnan University, Wuxi, China.
| |
Collapse
|
9
|
Cortes Ruiz MF, Brusentsev Y, Lindström SB, Xu C, Wågberg L. Shape-recovering nanocellulose networks: Preparation, characterization and modeling. Carbohydr Polym 2023; 315:120950. [PMID: 37230608 DOI: 10.1016/j.carbpol.2023.120950] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2023] [Revised: 03/20/2023] [Accepted: 04/22/2023] [Indexed: 05/27/2023]
Abstract
Development of strong cellulose nanofibril (CNF) networks for advanced applications, such as in the biomedical field, is of high importance owing to the biocompatible nature and plant-based origin of cellulose nanofibrils. Nevertheless, lack of mechanical strength and complex synthesis methods hinder the application of these materials in areas where both toughness and manufacturing simplicity are required. In this work, we introduce a facile method for the synthesis of a low solid content (< 2 wt%), covalently crosslinked CNF hydrogel where Poly (N-isopropylacrylamide) (NIPAM) chains are utilized as crosslinks between the nanofibrils. The resulting networks have the capability to fully recover the shape in which they were formed after various drying and rewetting cycles. Characterization of the hydrogel and its constitutive components was performed using X-ray scattering, rheological investigations and uniaxial testing in compression. Influence of covalent crosslinks was compared with networks crosslinked by the addition of CaCl2. Among other things the results show that the mechanical properties of the hydrogels can be tuned by controlling the ionic strength of the surrounding medium. Finally, a mathematical model was developed based on the experimental results, which describes and predicts to a decent degree the large-deformation, elastoplastic behavior, and fracture of these networks.
Collapse
Affiliation(s)
- Maria F Cortes Ruiz
- Fiber Technology Division, Fiber and Polymer Technology Department, KTH Royal Institute of Technology, 114 28 Stockholm, Sweden; Wallenberg Wood Science Center, Fiber and Polymer Technology Department, KTH Royal Institute of Technology, 114 28 Stockholm, Sweden
| | - Yury Brusentsev
- Laboratory of Natural Materials Technology, Åbo Akademi University, 20500 Åbo, Finland
| | | | - Chunlin Xu
- Laboratory of Natural Materials Technology, Åbo Akademi University, 20500 Åbo, Finland
| | - Lars Wågberg
- Fiber Technology Division, Fiber and Polymer Technology Department, KTH Royal Institute of Technology, 114 28 Stockholm, Sweden; Wallenberg Wood Science Center, Fiber and Polymer Technology Department, KTH Royal Institute of Technology, 114 28 Stockholm, Sweden.
| |
Collapse
|
10
|
Garavand F, Nooshkam M, Khodaei D, Yousefi S, Cacciotti I, Ghasemlou M. Recent advances in qualitative and quantitative characterization of nanocellulose-reinforced nanocomposites: A review. Adv Colloid Interface Sci 2023; 318:102961. [PMID: 37515865 DOI: 10.1016/j.cis.2023.102961] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2023] [Revised: 07/03/2023] [Accepted: 07/08/2023] [Indexed: 07/31/2023]
Abstract
Nanocellulose has received immense consideration owing to its valuable inherent traits and impressive physicochemical properties such as biocompatibility, thermal stability, non-toxicity, and tunable surface chemistry. These features have inspired researchers to deploy nanocellulose as nanoscale reinforcement materials for bio-based polymers. A simple yet efficient characterization method is often required to gain insights into the effectiveness of various types of nanocellulose. Despite a decade of continuous research and booming growth in scientific publications, nanocellulose research lacks a measuring tool that can characterize its features with acceptable speed and reliability. Implementing reliable characterization techniques is critical to monitor the specifications of nanocellulose alone or in the final product. Many techniques have been developed aiming to measure the nano-reinforcement mechanisms of nanocellulose in polymer composites. This review gives a full account of the scientific underpinnings of techniques that can characterize the shape and arrangement of nanocellulose. This review aims to deliver consolidated details on the properties and characteristics of nanocellulose in biopolymer composite materials to improve various structural, mechanical, barrier and thermal properties. We also present a comprehensive description of the safety features of nanocellulose before and after being loaded within biopolymeric matrices.
Collapse
Affiliation(s)
- Farhad Garavand
- Department of Food Chemistry and Technology, Teagasc Moorepark Food Research Centre, Fermoy, Co. Cork, Ireland.
| | - Majid Nooshkam
- Department of Food Science and Technology, Faculty of Agriculture, Ferdowsi University of Mashhad (FUM), Mashhad, Iran
| | - Diako Khodaei
- School of Food Science and Environmental Health, Environmental Sustainability and Health Institute, Technological University Dublin, Grangegorman, Dublin 7, Ireland.
| | - Shima Yousefi
- Department of Agriculture and Food Science, Islamic Azad University, Science and Research Branch, Tehran, Iran
| | - Ilaria Cacciotti
- Department of Engineering, INSTM RU, University of Rome 'Niccolò Cusano', Rome, Italy.
| | - Mehran Ghasemlou
- School of Science, STEM College, RMIT University, Melbourne, VIC 3000, Australia.
| |
Collapse
|
11
|
Vijayan JG, Niranjana Prabhu T, Jineesh AG, Pal K, Chakroborty S. Synthesis of bagasse nanocellulose-filled composite polyurethane xerogel for the efficient adsorption of Rhodamine-B dye from aqueous solution: investigation of adsorption parameters. THE EUROPEAN PHYSICAL JOURNAL. E, SOFT MATTER 2023; 46:23. [PMID: 36995479 DOI: 10.1140/epje/s10189-023-00278-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/15/2023] [Accepted: 03/06/2023] [Indexed: 05/09/2023]
Abstract
In this study, polyurethane (PU)-based xerogels were synthesized by using the biobased polyol derived from chaulmoogra seed oil. These polyol was used for the preparation of PU xerogels using methylene diphenyl diisocyanate hard segment and polyethylene glycol (PEG6000) as soft segment with 1,4-diazabicyclo[2, 2, 2]octane as catalyst. Tetrahydrofuran, acetonitrile and dimethyl sulfoxide were used as the solvents. Nanocellulose (5 wt %) prepared from bagasse were added as filler, and the obtained composite xerogels were evaluated for chemical stability. The prepared samples were also characterized by using SEM and FTIR. Waste sugarcane bagasse nanocellulose proved as a cheap reinforcer in the xerogel synthesis and for the adsorption of Rhodamine-B dye from the aqueous solution. The factors that affect the adsorption process have been studied including the quantity of the adsorbent (0.02-0.06 g), pH (6-12), temperature (30-50) and time (30-90). Central composite design for four variables and three levels with response surface methodology has been used to get second-order polynomial equation for the percentage dye removal. RSM was confirmed by the measurement of analysis of variance. Increase in the pH and quantity of the adsorbent was found to increase the sorption capacities of the xerogel (NC-PUXe) towards rhodamine B, maximum adsorption.
Collapse
Affiliation(s)
- Jyothy G Vijayan
- Department of Chemistry, M.S. Ramaiah University of Applied Sciences, IV Phase, Peenya Industrial Area, Bengaluru, 560058, India
| | - T Niranjana Prabhu
- Department of Chemistry, M.S. Ramaiah University of Applied Sciences, IV Phase, Peenya Industrial Area, Bengaluru, 560058, India.
| | - A G Jineesh
- Department of Chemistry, M.S. Ramaiah University of Applied Sciences, IV Phase, Peenya Industrial Area, Bengaluru, 560058, India
| | - Kaushik Pal
- Department of Physics, University Centre for Research and Development (UCRD), Chandigarh University, Mohali, Gharuan, Punjab, 140413, India.
| | | |
Collapse
|
12
|
Xue R, Zhao H, An ZW, Wu W, Jiang Y, Li P, Huang CX, Shi D, Li RKY, Hu GH, Wang SF. Self-Healable, Solvent Response Cellulose Nanocrystal/Waterborne Polyurethane Nanocomposites with Encryption Capability. ACS NANO 2023; 17:5653-5662. [PMID: 36897210 DOI: 10.1021/acsnano.2c11809] [Citation(s) in RCA: 19] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Cellulose nanocrystal (CNC)-based chiral nematic structure is widely used in stimulus response and sensing. A popular area of research is enhancing the mechanical characteristics and environmental adaptability of chiral nematic materials. In this paper, a flexible photonic film with self-healing ability (FPFS) was prepared by combining waterborne polyurethane containing dynamic covalent disulfide bonds (SSWPU) with CNC. The results found that the FPFS showed excellent toughness under the action of stretching, bending, twisting, and folding. The FPFS exhibited an amazing self-healing efficiency, which can be self-healed within 2 h at room temperature. Moreover, the FPFS could respond immediately and produce reversible color change when it was soaked in typical solvents. In addition, when ethanol was used as ink to paint on the FPFS, a visible pattern only under polarized light was formed. This study offers fresh perspectives in the areas of self-healing, biological anticounterfeiting, solvent response, and flexible photonic materials.
Collapse
Affiliation(s)
- Rui Xue
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Guangxi Bossco Environmental Protection Technology Co., Ltd., Nanning, Guangxi 530004, China
- National Local Joint Laboratory for Advanced Textile Processing and Clean Production, Wuhan Textile University, Wuhan 430062, China
| | - Hui Zhao
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou 542899, China
- State Key Laboratory of Biocatalysis and Enzyme Engineering, School of Life Sciences, Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, China
| | - Ze-Wei An
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
| | - Wei Wu
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon Tong, Hong Kong 999077, China
| | - Yan Jiang
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
| | - Peng Li
- Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou 542899, China
| | - Chong-Xing Huang
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
| | - Dean Shi
- State Key Laboratory of Biocatalysis and Enzyme Engineering, School of Life Sciences, Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei University, Wuhan 430062, China
| | - Robert K Y Li
- Department of Materials Science and Engineering, City University of Hong Kong, Kowloon Tong, Hong Kong 999077, China
| | - Guo-Hua Hu
- Laboratory of Reactions and Process Engineering, CNRS-University of Lorraine, Nancy 54001, France
| | - Shuang-Fei Wang
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
| |
Collapse
|
13
|
Babaei-Ghazvini A, Acharya B. The effects of aspect ratio of cellulose nanocrystals on the properties of all CNC films: tunicate and wood CNCs. CARBOHYDRATE POLYMER TECHNOLOGIES AND APPLICATIONS 2023. [DOI: 10.1016/j.carpta.2023.100311] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/31/2023] Open
|
14
|
Sun W, Wang J, He M. Anisotropic cellulose nanocrystal composite hydrogel for multiple responses and information encryption. Carbohydr Polym 2023; 303:120446. [PMID: 36657839 DOI: 10.1016/j.carbpol.2022.120446] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Revised: 11/19/2022] [Accepted: 12/06/2022] [Indexed: 12/14/2022]
Abstract
Anisotropic composites based on well-ordered cellulose nanocrystals (CNCs) have received increasing attention due to their fascinating optical properties. In this study, we fabricated a multi-functional hydrogel with nematic organization of CNC by soaking a pre-stretched polyvinyl alcohol (PVA)/CNC cyrogel in Na2SO4, CaCl2 solution and DI water in sequence. The crystalline domains, water content and transmittance of the hydrogel are regulated via the Hofmeister effect and hydrophobic interactions, which makes the birefringence of the hydrogel observable by interference colors. The aligned CNC not only enhance the mechanical strength of hydrogel, but also endow it with stimuli-responsive ability to the varying environment such as ion strength (0 to 5 M NaCl solution) and external forces (pressure of 0 to 248 kPa). Moreover, the patterned hydrogels are successfully fabricated by the method of local solvent displacement. Due to the low light transmission, the pattern can be encrypted and only be observed between crossed polarizers. These optical properties made the hydrogel a promising candidate for environmental monitoring and anti-counterfeit material.
Collapse
Affiliation(s)
- Wen Sun
- College of Science, Nanjing Forestry University, Nanjing 210037, China
| | - Jian Wang
- College of Science, Nanjing Forestry University, Nanjing 210037, China
| | - Ming He
- College of Science, Nanjing Forestry University, Nanjing 210037, China.
| |
Collapse
|
15
|
Antibacterial Activity of Ulva/Nanocellulose and Ulva/Ag/Cellulose Nanocomposites and Both Blended with Fluoride against Bacteria Causing Dental Decay. Polymers (Basel) 2023; 15:polym15041047. [PMID: 36850336 PMCID: PMC9961151 DOI: 10.3390/polym15041047] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2023] [Revised: 02/13/2023] [Accepted: 02/15/2023] [Indexed: 02/22/2023] Open
Abstract
One of the most prevalent chronic infectious disorders is tooth decay. Acids produced when plaque bacteria break down sugar in the mouth cause tooth decay. Streptococcus mutans and Lactobacillus acidophilus are the most prominent species related to dental caries. Innovative biocidal agents that integrate with a biomaterial to prevent bacterial colonization have shown remarkable promise as a result of the rapid advancement of nanoscience and nanotechnology. In this study, Ulva lactuca was used as a cellulose source and reducing agent to synthesize nanocellulose and Ulva/Ag/cellulose/nanocomposites. The characterizations of nanocellulose and Ulva/Ag/cellulose/nanocomposites were tested for FT-IR, TEM, SEM, EDS, XRD, and zeta potential. Ulva/Ag/cellulose/nanocomposites and Ulva/nanocellulose, both blended with fluoride, were tested as an antibacterial against S. mutans ATCC 25175 and L. acidophilus CH-2. The results of the SEM proved that nanocellulose is filament-shaped, and FT-IR proved that the functional groups of Ulva/nanocellulose and Ulva/Ag/cellulose/nanocomposites and cellulose are relatively similar but present some small diffusion in peaks. The TEM image demonstrated that the more piratical size distribution of Ulva/Ag/cellulose/nanocomposites ranged from 15 to 20 nm, and Ulva/nanocellulose ranged from 10 to 15 nm. Ulva/Ag/cellulose/nanocomposites have higher negativity than Ulva/nanocellulose. Ulva/Ag/cellulose/nanocomposites and Ulva/nanocellulose possess antibacterial activity against S. mutans ATCC 25175 and L. acidophilus CH-2, but Ulva/Ag/cellulose/nanocomposites are more effective, followed by that blended with fluoride. It is possible to use Ulva/Ag/cellulose/nanocomposites as an antimicrobial agent when added to toothpaste. It is promising to discover an economic and safe nanocomposite product from a natural source with an antimicrobial agent that might be used against tooth bacteria.
Collapse
|
16
|
Ren Q, Li W, Cui S, Ma W, Zhu X, Wu M, Wang L, Zheng W, Semba T, Ohshima M. Improved thermal insulation and compressive property of bimodal poly (lactic acid)/cellulose nanocomposite foams. Carbohydr Polym 2023; 302:120419. [PMID: 36604081 DOI: 10.1016/j.carbpol.2022.120419] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/07/2022] [Revised: 11/23/2022] [Accepted: 11/24/2022] [Indexed: 11/30/2022]
Abstract
In this work, an innovative PLA/CNF nanocomposite foam with a bimodal cell structure is prepared by a simple one-step depressurization foaming process using only supercritical carbon dioxide (ScCO2) as the foaming agent. Only at a specific foaming temperature, PLA/CNF nanocomposites foam with a bimodal cell structure could be obtained. According to the different crystallization kinetics and nucleation efficiency of samples, it was inferred that the crystallization rate and phase interface would affect the cell structure. The prepared PLA/CNF nanocomposite foam with a bimodal cell structure had an expansion ratio as high as 20 times and thermal conductivity of 0.041 w m-1 k-1, which exhibited low density and excellent thermal-insulation property. Meanwhile, the PLA/CNF nanocomposite foam exhibited excellent compression performance due to the presence of CNFs, which showed promising application in packaging and construction materials.
Collapse
Affiliation(s)
- Qian Ren
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Wanwan Li
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang Province 315211, China
| | - Shijie Cui
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang Province 315211, China
| | - Wenyu Ma
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Xiuyu Zhu
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang Province 315211, China
| | - Minghui Wu
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; Advanced Materials and Composites Department, University of Nottingham Ningbo China, 199 Taikang East Road, Ningbo 315000, China
| | - Long Wang
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China.
| | - Wenge Zheng
- Ningbo Key Lab of Polymer Materials, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China; University of Chinese Academy of Sciences, Beijing 100049, China
| | - Takeshi Semba
- Polymer Materials Laboratory, Kyoto Municipal Institute of Industrial Technology and Culture, 91 Chudoji Awata-cho, Shimogyo-ku, Kyoto, Japan
| | - Masahiro Ohshima
- Department of Chemical Engineering, Kyoto University, Katsura, Kyoto 6158510, Japan
| |
Collapse
|
17
|
Xie W, Liang X, Wang H, Zhao X, Tang Y, Wu M, Yang H. Structurally Tailoring Clay Nanosheets to Design Emerging Macrofibers with Tunable Mechanical Properties and Thermal Behavior. ACS APPLIED MATERIALS & INTERFACES 2023; 15:3141-3151. [PMID: 36598369 DOI: 10.1021/acsami.2c19295] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Bio-derived nanomaterials are promising candidates for spinning high-performance sustainable textiles, but the inherent flammability of biomass-based fibers seriously limits their applications. There is still an urgent need to improve fiber flame retardancy while maintaining excellent mechanical performance. Here, inspired by the structural properties of layered nanoclay, we report a novel and efficient strategy to synthesize the strong, super tough, and flame-retardant nanocellulose/clay/sodium alginate (CRS) macrofibers via wet-spinning and directional drying. Benefiting from the precise modulation of arrangement and orientation of nanoclay in macrofibers, the new inorganic structure exhibits excellent mechanical and thermal functional properties. The anisotropic structure contributes to high toughness: the tensile strength was 373.3 MPa and the toughness was 26.92 MJ·m-3. Remarkably, rectorite nanosheets as a thermal and qualitative insulator significantly improve the flame retardancy of the CRS fibers with a heat release rate as low as 6.07 W/g, thermal conductivity of 90.5 mW/(m·K), and good temperature tolerance (ranging from -196 to 100 °C). This facile and high-efficiency strategy may have great scalability in manufacturing high-strength, super tough, and flame-retardant fibers for emerging biodegradable next-generation artificial fibers.
Collapse
Affiliation(s)
- Weimin Xie
- Hunan Key Laboratory of Mineral Materials and Application, School of Minerals Processing and Bioengineering, Central South University, Changsha410083, China
| | - Xiaozheng Liang
- Hunan Key Laboratory of Mineral Materials and Application, School of Minerals Processing and Bioengineering, Central South University, Changsha410083, China
| | - Hao Wang
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, China University of Geosciences, Wuhan430074, China
- Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan430074, China
- Key Laboratory of Functional Geomaterials in China Nonmetallic Minerals Industry, China University of Geosciences, Wuhan430074, China
| | - Xiaoguang Zhao
- Hunan Key Laboratory of Mineral Materials and Application, School of Minerals Processing and Bioengineering, Central South University, Changsha410083, China
| | - Yili Tang
- School of Chemistry and Chemical Engineering, Central South University, Changsha410083, China
| | - Mingjie Wu
- Electrochemistry/Corrosion Laboratory, Department of Chemical Engineering, McGill University, Montréal, QuébecH3A 0C5, Canada
| | - Huaming Yang
- Engineering Research Center of Nano-Geomaterials of Ministry of Education, China University of Geosciences, Wuhan430074, China
- Hunan Key Laboratory of Mineral Materials and Application, School of Minerals Processing and Bioengineering, Central South University, Changsha410083, China
- Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan430074, China
- Key Laboratory of Functional Geomaterials in China Nonmetallic Minerals Industry, China University of Geosciences, Wuhan430074, China
| |
Collapse
|
18
|
Realization of water resistant, durable and self-cleaning on oriented cellulose nanocomposite packaging films. JOURNAL OF POLYMER RESEARCH 2023. [DOI: 10.1007/s10965-022-03366-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/03/2022]
|
19
|
Wang M, Xu P, Lei B. Engineering multifunctional bioactive citrate-based biomaterials for tissue engineering. Bioact Mater 2023; 19:511-537. [PMID: 35600971 PMCID: PMC9096270 DOI: 10.1016/j.bioactmat.2022.04.027] [Citation(s) in RCA: 14] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2022] [Revised: 04/22/2022] [Accepted: 04/24/2022] [Indexed: 12/21/2022] Open
Abstract
Developing bioactive biomaterials with highly controlled functions is crucial to enhancing their applications in regenerative medicine. Citrate-based polymers are the few bioactive polymer biomaterials used in biomedicine because of their facile synthesis, controllable structure, biocompatibility, biomimetic viscoelastic mechanical behavior, and functional groups available for modification. In recent years, various multifunctional designs and biomedical applications, including cardiovascular, orthopedic, muscle tissue, skin tissue, nerve and spinal cord, bioimaging, and drug or gene delivery based on citrate-based polymers, have been extensively studied, and many of them have good clinical application potential. In this review, we summarize recent progress in the multifunctional design and biomedical applications of citrate-based polymers. We also discuss the further development of multifunctional citrate-based polymers with tailored properties to meet the requirements of various biomedical applications. Multifunctional bioactive citrate-based biomaterials have broad applications in regenerative medicine. Recent advances in multifunctional design and biomedical applications of citate-based polymers are summarized. Future challenge of citrate-based polymers in various biomedical applications are discussed.
Collapse
|
20
|
Sun D, Gao Y, Zhou Y, Yang M, Hu J, Lu T, Wang T. Enhance Fracture Toughness and Fatigue Resistance of Hydrogels by Reversible Alignment of Nanofibers. ACS APPLIED MATERIALS & INTERFACES 2022; 14:49389-49397. [PMID: 36273343 DOI: 10.1021/acsami.2c16273] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Biological tissues, such as heart valve, tendon, etc., possess excellent mechanical properties, which arises from their inherent anisotropic arrangement of soft and hard phases. Inspired by the anisotropic structures, many methods have been developed to synthesize hydrogels that can achieve mechanical properties comparable to biological tissues. Here, we describe a new method to enhance fracture toughness and fatigue resistance of hydrogels by introducing nanofibers which can reversibly align with elastic deformation to form an anisotropic structure. As a demonstration, we introduce stiff, rod-like cellulose nanocrystals (CNCs) into a polyacrylamide (PAAm) network. CNCs aggregate into clusters to form hard phases and entangle with the PAAm network. The CNC/PAAm composite hydrogel is initially isotropic, becomes anisotropic upon loading, and recovers to be isotropic upon unloading. During the deformation, the aligned CNC clusters at the crack tip can transmit the stress over the size of the cluster, effectively resisting crack growth. We use photoelasticity and small-angle X-ray scattering (SAXS) tests to observe the change of microstructures associated with deformation. The fracture toughness of CNC/PAAm hydrogels with different sizes of CNCs can reach 1000 J/m2. The fatigue threshold is about 100 J/m2, an order of magnitude higher than that of PAAm hydrogel. This work provides a simple and general method to strengthen hydrogels under both monotonic and cyclic loads.
Collapse
Affiliation(s)
- Danqi Sun
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| | - Yang Gao
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| | - Yifan Zhou
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| | - Meng Yang
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| | - Jian Hu
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| | - Tongqing Lu
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| | - Tiejun Wang
- State Key Lab for Strength and Vibration of Mechanical Structures, Soft Machines Lab, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an 710049, China
| |
Collapse
|
21
|
Wang J, Liu Q, Gong J, Wan Z, Zhou J, Chang C, Zhang D. Micropatterned Hydrogels with Highly Ordered Cellulose Nanocrystals for Visually Monitoring Cardiomyocytes. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2202235. [PMID: 36089663 DOI: 10.1002/smll.202202235] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/24/2022] [Revised: 08/12/2022] [Indexed: 06/15/2023]
Abstract
Cardiac microphysiological systems are accurate in vitro platforms that reveal the biological mechanisms underlying cardiopathy, accelerating pharmaceutical research in this field. Current cardiac microphysiological devices and organs-on-chips consist of several layers prepared with complex, multi-step processes. Incorporating inorganic photonic crystals may cause long-term biocompatibility issues. Herein, micropatterned hydrogels with anisotropic structural colors are prepared by locking shear-oriented tunicate cellulose nanocrystals (TCNCs) in hydrogel networks through in situ polymerization, allowing the visualization and monitoring of cardiomyocytes. The anisotropic hydrogels are composed of highly ordered TCNCs with bright interference color and micro-grooved methacrylated gelatin with excellent biocompatibility. The microgroove patterns induce cardiomyocyte alignment and the autonomous beating of cardiomyocytes causes the hydrogels to deform, dynamically shifting the interference color. These micropatterned hydrogels could noninvasively monitor real-time changes of cardiomyocytes under pharmaceutical treatment and electrical stimulation through wavelength shifts in the transmittance spectra. This system provides a new way to detect the beat rate of cardiac tissue and it may contribute to high throughput develop.
Collapse
Affiliation(s)
- Junmei Wang
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan, 430072, China
| | - Qian Liu
- Hubei Province Key Laboratory of Biotechnology of Chinese Traditional Medicine, National & Local Joint Engineering Research Center of High-throughput Drug Screening Technology, State Key Laboratory of Biocatalysis and Enzyme Engineering, School of Life Science, Hubei University, Wuhan, 430062, China
| | - Jixing Gong
- Hubei Province Key Laboratory of Biotechnology of Chinese Traditional Medicine, National & Local Joint Engineering Research Center of High-throughput Drug Screening Technology, State Key Laboratory of Biocatalysis and Enzyme Engineering, School of Life Science, Hubei University, Wuhan, 430062, China
| | - Zhongjun Wan
- Hubei Province Key Laboratory of Biotechnology of Chinese Traditional Medicine, National & Local Joint Engineering Research Center of High-throughput Drug Screening Technology, State Key Laboratory of Biocatalysis and Enzyme Engineering, School of Life Science, Hubei University, Wuhan, 430062, China
| | - Jinping Zhou
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan, 430072, China
| | - Chunyu Chang
- College of Chemistry and Molecular Sciences, Hubei Engineering Center of Natural Polymer-based Medical Materials, Wuhan University, Wuhan, 430072, China
| | - Donghui Zhang
- Hubei Province Key Laboratory of Biotechnology of Chinese Traditional Medicine, National & Local Joint Engineering Research Center of High-throughput Drug Screening Technology, State Key Laboratory of Biocatalysis and Enzyme Engineering, School of Life Science, Hubei University, Wuhan, 430062, China
| |
Collapse
|
22
|
Yue C, Ding C, Yang N, Luo Y, Su J, Cao L, Cheng B. Strong and tough collagen/cellulose nanofibril composite films via the synergistic effect of hydrogen and metal–ligand bonds. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2022.111628] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2022]
|
23
|
Ma H, Cheng Z, Li X, Li B, Fu Y, Jiang J. Advances and Challenges of Cellulose Functional Materials in Sensors. JOURNAL OF BIORESOURCES AND BIOPRODUCTS 2022. [DOI: 10.1016/j.jobab.2022.11.001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022] Open
|
24
|
Ren Q, Wu M, Wang L, Zheng W, Hikima Y, Semba T, Ohshima M. Light and strong poly (lactic acid)/ cellulose nanofiber nanocomposite foams with enhanced rheological and crystallization property. J Supercrit Fluids 2022. [DOI: 10.1016/j.supflu.2022.105758] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
25
|
Dai CF, Khoruzhenko O, Zhang C, Zhu QL, Jiao D, Du M, Breu J, Zhao P, Zheng Q, Wu ZL. Magneto-Orientation of Magnetic Double Stacks for Patterned Anisotropic Hydrogels with Multiple Responses and Modulable Motions. Angew Chem Int Ed Engl 2022; 61:e202207272. [PMID: 35749137 PMCID: PMC9541020 DOI: 10.1002/anie.202207272] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2022] [Indexed: 01/03/2023]
Abstract
Reported here is a multi-response anisotropic poly(N-isopropylacrylamide) hydrogel developed by using a rotating magnetic field to align magnetic double stacks (MDSs) that are fixed by polymerization. The magneto-orientation of MDSs originates from the unique structure with γ-Fe2 O3 nanoparticles sandwiched by two silicate nanosheets. The resultant gels not only exhibit anisotropic optical and mechanical properties but also show anisotropic responses to temperature and light. Gels with complex ordered structures of MDSs are further devised by multi-step magnetic orientation and photolithographic polymerization. These gels show varied birefringence patterns with potentials as information materials, and can deform into specific configurations upon stimulations. Multi-gait motions are further realized in the patterned gel through dynamic deformation under spatiotemporal light and friction regulation by imposed magnetic force. The magneto-orientation assisted fabrication of hydrogels with anisotropic structures and additional functions should bring opportunities for gel materials in biomedical devices, soft actuators/robots, etc.
Collapse
Affiliation(s)
- Chen Fei Dai
- Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Olena Khoruzhenko
- The State Key Laboratory of Fluid Power Transmission and Control Systems, Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310028, China
| | - Chengqian Zhang
- The State Key Laboratory of Fluid Power Transmission and Control Systems, Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310028, China
| | - Qing Li Zhu
- Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Dejin Jiao
- Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Miao Du
- Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Josef Breu
- Bavarian Polymer Institute and Department of Chemistry, University of Bayreuth, Universitätsstrasse 30, 95440, Bayreuth, Germany
| | - Peng Zhao
- The State Key Laboratory of Fluid Power Transmission and Control Systems, Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310028, China
| | - Qiang Zheng
- Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Zi Liang Wu
- Ministry of Education Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| |
Collapse
|
26
|
Wang H, Song R, Li M, Liu C, Ke Y, Yin P. Surface Doping of Anionic Clusters Facilitated Direct Fabrication of Commercial Cellulose Nanofibrils for Long-Range Ordered Layer Structures. Biomacromolecules 2022; 23:3329-3335. [DOI: 10.1021/acs.biomac.2c00438] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Huihui Wang
- South China Advanced Institute for Soft Matter Science and Technology, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, 381 Wushan Road, Guangzhou 510640, China
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510640, China
| | - Rui Song
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510640, China
| | - Mu Li
- South China Advanced Institute for Soft Matter Science and Technology, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, 381 Wushan Road, Guangzhou 510640, China
| | - Chuanfu Liu
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510640, China
| | - Yubin Ke
- Chinese Academy of Science, Institute of High Energy Physics, Beijing 100049, China
| | - Panchao Yin
- South China Advanced Institute for Soft Matter Science and Technology, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, 381 Wushan Road, Guangzhou 510640, China
| |
Collapse
|
27
|
Xue X, Song G, Chang C. Tough all-polysaccharide hydrogels with uniaxially/planarly oriented structure. Carbohydr Polym 2022; 288:119376. [DOI: 10.1016/j.carbpol.2022.119376] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/28/2021] [Revised: 03/04/2022] [Accepted: 03/16/2022] [Indexed: 01/24/2023]
|
28
|
Dai CF, Khoruzhenko O, Zhang C, Zhu QL, Jiao D, Du M, Breu J, Zhao P, Zheng Q, Wu ZL. Magneto‐Orientation of Magnetic Double Stacks for Patterned Anisotropic Hydrogels with Multiple Responses and Modulable Motions. Angew Chem Int Ed Engl 2022. [DOI: 10.1002/ange.202207272] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Chen Fei Dai
- Zhejiang University Department of Polymer Science and Engineering CHINA
| | - Olena Khoruzhenko
- Bayreuth University: Universitat Bayreuth Bavarian Polymer Institute and Department of Chemistry GERMANY
| | | | - Qing Li Zhu
- Zhenjiang University: Zhejiang University Department of Polymer Science and Engineering CHINA
| | - Dejin Jiao
- Zhejiang University Department of Polymer Science and Engineering, CHINA
| | - Miao Du
- Zhenjiang University: Zhejiang University Department of Polymer Science and Engineering CHINA
| | - Josef Breu
- Universität Bayreuth Lehrstuhl für Anorganische Chemie I Universitatsstraße 30 95440 Bayreuth GERMANY
| | - Peng Zhao
- Zhenjiang University: Zhejiang University School of Mechanical Engineering CHINA
| | - Qiang Zheng
- Zhenjiang University: Zhejiang University Department of Polymer Science and Engineering CHINA
| | - Zi Liang Wu
- Zhenjiang University: Zhejiang University Department of Polymer Science and Engineering CHINA
| |
Collapse
|
29
|
Shi Y, Jiao H, Sun J, Lu X, Yu S, Cheng L, Wang Q, Liu H, Biranje S, Wang J, Liu J. Functionalization of nanocellulose applied with biological molecules for biomedical application: A review. Carbohydr Polym 2022; 285:119208. [DOI: 10.1016/j.carbpol.2022.119208] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2021] [Revised: 01/29/2022] [Accepted: 01/29/2022] [Indexed: 01/21/2023]
|
30
|
Developing cellulosic functional materials from multi-scale strategy and applications in flexible bioelectronic devices. Carbohydr Polym 2022; 283:119160. [DOI: 10.1016/j.carbpol.2022.119160] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2021] [Revised: 01/04/2022] [Accepted: 01/17/2022] [Indexed: 12/29/2022]
|
31
|
Li X, Liu J, Guo Q, Zhang X, Tian M. Polymerizable Deep Eutectic Solvent-Based Skin-Like Elastomers with Dynamic Schemochrome and Self-Healing Ability. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2201012. [PMID: 35403800 DOI: 10.1002/smll.202201012] [Citation(s) in RCA: 29] [Impact Index Per Article: 14.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2022] [Revised: 03/14/2022] [Indexed: 06/14/2023]
Abstract
Animal skin is a huge source of inspiration when it comes to multifunctional sensing materials. Bioinspired sensors integrated with the intriguing performance of skin-like steady wide-range strain detection, real-time dynamic visual cues, and self-healing ability hold great promise for next-generation electronic skin materials. Here, inspired by the skins of a chameleon, cellulose nanocrystals (CNCs) liquid crystal skeleton is embedded into polymerizable deep eutectic solvent (PDES) via in situ polymerization to develop a skin-like elastomer. Benefiting from the elastic ionic conductive PDES matrix and dynamic interfacial hydrogen bonding, this strategy has broken through the limitations that CNCs-based cholesteric structure is fragile and its helical pitch is non-adjustable, endowing the resulting elastomer with strain-induced wide-range (0-500%) dynamic structural colors and excellent self-healing ability (78.9-90.7%). Furthermore, the resulting materials exhibit high stretch-ability (1163.7%), strain-sensing and self-adhesive abilities, which make them well-suitable for developing widely applicable and highly reliable flexible sensors. The proposed approach of constructing biomimetic skin-like materials with wide-range dynamic schemochrome is expected to extend new possibilities in diverse applications including anti-counterfeit labels, soft foldable displays, and wearable optical devices.
Collapse
Affiliation(s)
- Xinkai Li
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China
| | - Jize Liu
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China
| | - Quanquan Guo
- Faculty of Chemistry and Food Chemistry, Technische Universität Dresden, 01069, Dresden, Germany
| | - Xinxing Zhang
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China
| | - Ming Tian
- State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing, 100029, China
| |
Collapse
|
32
|
Zhao X, Chen S, Wu Z, Sheng N, Zhang M, Liang Q, Han Z, Wang H. Toward continuous high-performance bacterial cellulose macrofibers by implementing grading-stretching in spinning. Carbohydr Polym 2022; 282:119133. [DOI: 10.1016/j.carbpol.2022.119133] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/21/2021] [Revised: 01/07/2022] [Accepted: 01/08/2022] [Indexed: 11/27/2022]
|
33
|
Das R, Lindström T, Sharma PR, Chi K, Hsiao BS. Nanocellulose for Sustainable Water Purification. Chem Rev 2022; 122:8936-9031. [PMID: 35330990 DOI: 10.1021/acs.chemrev.1c00683] [Citation(s) in RCA: 56] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.
Collapse
Affiliation(s)
- Rasel Das
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Tom Lindström
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States.,KTH Royal Institute of Technology, Stockholm 100 44, Sweden
| | - Priyanka R Sharma
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Kai Chi
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| | - Benjamin S Hsiao
- Department of Chemistry, Stony Brook University, Stony Brook, New York 11794-3400, United States
| |
Collapse
|
34
|
Ge W, Zhang F, Wang D, Wei Q, Li Q, Feng Z, Feng S, Xue X, Qing G, Liu Y. Highly Tough, Stretchable, and Solvent-Resistant Cellulose Nanocrystal Photonic Films for Mechanochromism and Actuator Properties. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2107105. [PMID: 35107207 DOI: 10.1002/smll.202107105] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/16/2021] [Revised: 12/17/2021] [Indexed: 05/24/2023]
Abstract
Cellulose nanocrystals (CNCs)-derived photonic materials have confirmed great potential in producing renewable optical and engineering areas. However, it remains challenging to simultaneously possess toughness, strength, and multiple responses for developing high-performance sensors, intelligent coatings, flexible textiles, and multifunctional devices. Herein, the authors report a facile and robust strategy that poly(ethylene glycol) dimethacrylate (PEGDMA) can be converged into the chiral nematic structure of CNCs by ultraviolet-triggered free radical polymerization in an N,N-dimethylformamide solvent system. The resulting CNC-poly(PEGDMA) composite exhibits impressive strength (42 MPa), stretchability (104%), toughness (31 MJ m-3 ), and solvent resistance. Notably, it preserves vivid optical iridescence, displaying stretchable variation from red, yellow, to green responding to the applied mechanical stimuli. More interestingly, upon exposure to spraying moisture, it executes sensitive actuation (4.6° s-1 ) and multiple complex 3D deformation behaviors, accompanied by synergistic iridescent appearances. Due to its structural anisotropy of CNC with typical left-handedness, the actuation shows the capability to generate a high probability (63%) of right-handed helical shapes, mimicking a coiled tendril. The authors envision that this versatile system with sustainability, robustness, mechanochromism, and specific actuating ability will open a sustainable avenue in mechanical sensors, stretchable optics, intelligent actuators, and soft robots.
Collapse
Affiliation(s)
- Wenna Ge
- School of Mechanical Engineering, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Fusheng Zhang
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Dongdong Wang
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, P. R. China
| | - Quanmao Wei
- School of Mechanical Engineering, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Qiongya Li
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Zhixin Feng
- School of Mechanical Engineering, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Shile Feng
- School of Mechanical Engineering, Dalian University of Technology, Dalian, 116024, P. R. China
| | - Xingya Xue
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
| | - Guangyan Qing
- CAS Key Laboratory of Separation Science for Analytical Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, P. R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P. R. China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), College of Chemistry, Nankai University, Tianjin, 300071, P. R. China
| | - Yahua Liu
- School of Mechanical Engineering, Dalian University of Technology, Dalian, 116024, P. R. China
| |
Collapse
|
35
|
Lee SR, Reichmanis E, Srinivasarao M. Anisotropic Responsive Microgels Based on the Cholesteric Phase of Chitin Nanocrystals. ACS Macro Lett 2022; 11:96-102. [PMID: 35574788 DOI: 10.1021/acsmacrolett.1c00675] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Anisotropic stimuli-responsive microgels based upon the cholesteric phase of chitin nanocrystals and N-isopropylacrylamide were designed and synthesized. The cholesteric structure was interrogated, and the texture was shown to directly influence the microgel shape and anisotropy. Changes in the microgel volume led to changes in the texture, where microgels comprising up to six bands exhibited a twisted bipolar texture, while those with greater volumes displayed a concentric-packing structure. As designed, the imprinted cholesteric phase induced an asymmetric response to temperature, leading to a change in shape and optical properties. Furthermore, the cholesteric structure is able to deform, facilitating transport into a small channel. Access to synthetic structures having a self-assembled twisted texture derived from cholesterics embedded within a polymer matrix will provide guidelines for designing biopolymer composites with programmable motion.
Collapse
Affiliation(s)
- Sujin R. Lee
- School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| | - Elsa Reichmanis
- Department of Chemical & Biomolecular Engineering, Lehigh University, Bethlehem, Pennsylvania 18015, United States
| | - Mohan Srinivasarao
- School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| |
Collapse
|
36
|
Starkova O, Platnieks O, Sabalina A, Gaidukovs S. Hydrothermal Ageing Effect on Reinforcement Efficiency of Nanofibrillated Cellulose/Biobased Poly(butylene succinate) Composites. Polymers (Basel) 2022; 14:221. [PMID: 35054628 PMCID: PMC8780645 DOI: 10.3390/polym14020221] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2021] [Revised: 12/30/2021] [Accepted: 01/04/2022] [Indexed: 11/26/2022] Open
Abstract
Nanofibrillated cellulose (NFC) is a sustainable functional nanomaterial known for its high strength, stiffness, and biocompatibility. It has become a key building block for the next-generation of lightweight, advanced materials for applications such as consumer products, biomedical, energy storage, coatings, construction, and automotive. Tunable and predictable durability under environmental impact is required for high performance applications. Bio-based poly (butylene succinate) (PBS) composites containing up to 50% NFC content were designed and aged in distilled water or at high relative humidity (RH98%). PBS/NFC composites are characterized by up to 10-fold increased water absorption capacity and diffusivity and the data are correlated with model calculations. Aged samples exhibited decreased crystallinity and melting temperature. Incorporation of NFC into PBS showed up to a 2.6-fold enhancement of the elastic modulus, although accompanied by a loss of strength by 40% and 8-fold reduction in the strain at failure of maximally loaded composites. Hydrothermal ageing had almost no influence on the tensile characteristics of PBS; however, there were considerable degradation effects in PBS/NFC composites. Altered reinforcement efficiency is manifested through a 3.7-fold decreased effective elastic moduli of NFC determined by applying the Halpin-Tsai model and a proportional reduction of the storage moduli of composites. The adhesion efficiency in composites was reduced by hydrothermal ageing, as measured Puckanszky's adhesion parameter for the strength, which decreased from 3 to 0.8. For the loss factor, Kubat's adhesion parameter was increased by an order. PBS filled with 20 wt.% NFC is identified as the most efficient composition, for which negative environmental degradation effects are counterbalanced with the positive reinforcement effect. The PBS matrix can be used to protect the NFC network from water.
Collapse
Affiliation(s)
- Olesja Starkova
- Institute for Mechanics of Materials, University of Latvia, Jelgavas 3, LV-1004 Riga, Latvia;
| | - Oskars Platnieks
- Faculty of Materials Science and Applied Chemistry, Institute of Polymer Materials, Riga Technical University, P. Valdena 3/7, LV-1048 Riga, Latvia; (O.P.); (S.G.)
| | - Alisa Sabalina
- Institute for Mechanics of Materials, University of Latvia, Jelgavas 3, LV-1004 Riga, Latvia;
| | - Sergejs Gaidukovs
- Faculty of Materials Science and Applied Chemistry, Institute of Polymer Materials, Riga Technical University, P. Valdena 3/7, LV-1048 Riga, Latvia; (O.P.); (S.G.)
| |
Collapse
|
37
|
Mechanical properties of cellulose nanofibril papers and their bionanocomposites: A review. Carbohydr Polym 2021; 273:118507. [PMID: 34560938 DOI: 10.1016/j.carbpol.2021.118507] [Citation(s) in RCA: 34] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/03/2021] [Revised: 07/14/2021] [Accepted: 07/26/2021] [Indexed: 12/25/2022]
Abstract
Cellulose nanofibril (CNF) paper has various applications due to its unique advantages. Herein, we present the intrinsic mechanical properties of CNF papers, along with the preparation and properties of nanoparticle-reinforced CNF composite papers. The literature on CNF papers reveals a strong correlation between the intrafibrillar network structure and the resulting mechanical properties. This correlation is found to hold for all primary factors affecting mechanical properties, indicating that the performance of CNF materials depends directly on and can be tailored by controlling the intrafibrillar network of the system. The parameters that influence the mechanical properties of CNF papers were critically reviewed. Moreover, the effect on the mechanical properties by adding nanofillers to CNF papers to produce multifunctional composite products was discussed. We concluded this article with future perspectives and possible developments in CNFs and their bionanocomposite papers.
Collapse
|
38
|
Zhao C, Chen R, Chen Z, Lu Q, Zhu H, Bu Q, Yin J, He H. Bioinspired Multifunctional Cellulose Nanofibril-Based In Situ Liquid Wound Dressing for Multiple Synergistic Therapy of the Postoperative Infected Wound. ACS APPLIED MATERIALS & INTERFACES 2021; 13:51578-51591. [PMID: 34666485 DOI: 10.1021/acsami.1c18221] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
A smart in situ-formed wound dressing with excellent antibacterial ability against drug-resistance bacterial, antitumor, and biofilm-eliminating activities to promote effective wound closure is highly desirable in therapeutic and clinical applications. Herein, we designed and developed a multifunctional; shape-adaptable; and pH, temperature, and near-infrared radiation (NIR) multiple responsive cellulose nanofibril (CNF)-based in situ liquid wound dressing, using a pH-sensitive CNF grafted with terminated amino hyperbranched polyamines (HBP-NH2) as a substrate, along with poly(N-isopropylacrylamide) and indocyanine green (ICG) loaded as the temperature and NIR on/off switches, respectively. The 3D nanocage network structure of CNF and the nanocavities in the hyperbranched structure of HBP-NH2 endow the dressing with a high loading capacity for active drugs (doxorubicin and ICG) simultaneously. Moreover, the responsiveness of the dressing to multiple stimuli enables controllable and efficient drug release to the wound area. The bioinspired dressing demonstrates excellent antibacterial activity against common bacteria and methicillin-resistant Staphylococcus aureus, antitumor activity against A375 tumor cells, and biofilm-eliminating capability. In addition, the developed dressing synergistically combines multiple therapeutic strategies for effective wound healing, specifically photothermal therapy, photodynamic therapy, and chemotherapy. The design provides an ideal clinical intervention strategy for irregular tumor postoperative infected wounds.
Collapse
Affiliation(s)
- Chao Zhao
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| | - Rimei Chen
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| | - Zhiping Chen
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| | - Qin Lu
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| | - Hongxiang Zhu
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| | - Qing Bu
- The First Affiliated Hospital of Guangxi Medical University, Nanning 530021, P.R. China
| | - Jiali Yin
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| | - Hui He
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, P.R. China
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, Nanning 530004, P.R. China
| |
Collapse
|
39
|
Zhang Y, Zhang C, Wang Y. Recent progress in cellulose-based electrospun nanofibers as multifunctional materials. NANOSCALE ADVANCES 2021; 3:6040-6047. [PMID: 36133945 PMCID: PMC9417631 DOI: 10.1039/d1na00508a] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/29/2021] [Accepted: 09/06/2021] [Indexed: 05/13/2023]
Abstract
Cellulose, the most abundant natural polymer, has good biocompatibility, biodegradability, and non-toxicity, which make it and its derivatives promising candidates for the fabrication of multifunctional materials, while maintaining sustainability and environmental friendliness. The combination of electrospinning technology and cellulose (and its derivatives) provides a feasible approach to produce nanostructured porous materials with promising functionalities, flexibility, renewability and biodegradability. At the same time, it enables value-added applications of cellulose and its derivatives that are derived from nature or even biomass waste. This review summarizes and discusses the latest progress in cellulose-based electrospun nanofibers, including their construction methods and conditions, various available raw materials, and applications in multiple areas (water treatment, biomaterials, sensors, electro-conductive materials, active packaging, and so on), which are followed by the conclusion and prospects associated with future opportunities and challenges in this active research area.
Collapse
Affiliation(s)
- Yirong Zhang
- Department of Food Science and Agricultural Chemistry, McGill University 21111 Lakeshore Ste Anne de Bellevue Quebec H9X 3V9 Canada
| | - Cunzhi Zhang
- Department of Food Science and Agricultural Chemistry, McGill University 21111 Lakeshore Ste Anne de Bellevue Quebec H9X 3V9 Canada
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology Guangzhou 510640 China
| | - Yixiang Wang
- Department of Food Science and Agricultural Chemistry, McGill University 21111 Lakeshore Ste Anne de Bellevue Quebec H9X 3V9 Canada
| |
Collapse
|
40
|
Gong Y, Liu L, Wang F, Pei Y, Liu S, Lyu R, Luo X. Aminated chitosan/cellulose nanocomposite microspheres designed for efficient removal of low-concentration sulfamethoxazole from water. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2021.116407] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
41
|
Huang Y, Yang P, Yang F, Chang C. Self-supported nanoporous lysozyme/nanocellulose membranes for multifunctional wastewater purification. J Memb Sci 2021. [DOI: 10.1016/j.memsci.2021.119537] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
42
|
Cui Y, Li D, Gong C, Chang C. Bioinspired Shape Memory Hydrogel Artificial Muscles Driven by Solvents. ACS NANO 2021; 15:13712-13720. [PMID: 34396782 DOI: 10.1021/acsnano.1c05019] [Citation(s) in RCA: 53] [Impact Index Per Article: 17.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Although hydrogels containing large amounts of water are similar to natural muscles, they are a challenge to be used in artificial muscles because of their poor mechanical properties and low work capacities. The current paper describes the design and fabrication of tendril-inspired hydrogel artificial muscles via a consecutive shaping process. Tunicate cellulose nanocrystals (TCNCs) are incorporated into polymeric networks via host-guest interactions to reinforce the hydrogel. Tendril-inspired hydrogels are obtained by treating the TCNC-reinforced hydrogels with a consecutive stretching, twisting, and coiling process and locking the shaped structure through Fe3+/-COO- ionic coordination. These hydrogel muscles exhibit a high actuation rate, large actuation strain, and shape memory property in response to solvents. The actuation performances of hydrogel muscles are affected by their chirality, twist density, applied stress, and temporary shape. Moreover, a homochiral hydrogel muscle with temporary shape II shows comparable contractile work capacity with a natural muscle, which can be applied as the engine to actuate the movement of a car model. This work demonstrates a simple and effective strategy for the fabrication of hydrogel artificial muscles that have great potential for biomedical application as a result of their comparable water content and contractile work capacity with natural muscles.
Collapse
Affiliation(s)
- Yande Cui
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-Based Medical Materials in Hubei Province, Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei 430072, People's Republic of China
| | - Dong Li
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-Based Medical Materials in Hubei Province, Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei 430072, People's Republic of China
| | - Chen Gong
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-Based Medical Materials in Hubei Province, Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei 430072, People's Republic of China
| | - Chunyu Chang
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-Based Medical Materials in Hubei Province, Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, Hubei 430072, People's Republic of China
| |
Collapse
|
43
|
Li X, Liu J, Li D, Huang S, Huang K, Zhang X. Bioinspired Multi-Stimuli Responsive Actuators with Synergistic Color- and Morphing-Change Abilities. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:e2101295. [PMID: 34114362 PMCID: PMC8373155 DOI: 10.1002/advs.202101295] [Citation(s) in RCA: 47] [Impact Index Per Article: 15.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/30/2021] [Revised: 04/28/2021] [Indexed: 05/08/2023]
Abstract
The combination of complex perception, defense, and camouflage mechanisms is a pivotal instinctive ability that equips organisms with survival advantages. The simulations of such fascinating multi-stimuli responsiveness, including thigmotropism, bioluminescence, color-changing ability, and so on, are of great significance for scientists to develop novel biomimetic smart materials. However, most biomimetic color-changing or luminescence materials can only realize a single stimulus-response, hence the design and fabrication of multi-stimuli responsive materials with synergistic color-changing are still on the way. Here, a bioinspired multi-stimuli responsive actuator with color- and morphing-change abilities is developed by taking advantage of the assembled cellulose nanocrystals-based cholesteric liquid crystal structure and its water/temperature response behaviors. The actuator exhibits superfast, reversible bi-directional humidity and near-infrared (NIR) light actuating ability (humidity: 9 s; NIR light: 16 s), accompanying with synergistic iridescent appearance which provides a visual cue for the movement of actuators. This work paves the way for biomimetic multi-stimuli responsive materials and will have a wide range of applications such as optical anti-counterfeiting devices, information storage materials, and smart soft robots.
Collapse
Affiliation(s)
- Xinkai Li
- State Key Laboratory of Polymer Materials EngineeringPolymer Research Institute of Sichuan UniversityNo.24 South Section 1, Yihuan RoadChengdu610065China
| | - Jize Liu
- State Key Laboratory of Polymer Materials EngineeringPolymer Research Institute of Sichuan UniversityNo.24 South Section 1, Yihuan RoadChengdu610065China
| | - Dongdong Li
- Environmental protection facilities or service departmentGuangxi Beitou Environmental Protection & Water Group Co.Ltd. 153 Minzu AvenueNanning530029China
| | - Shaoquan Huang
- National Engineering Research Center for Non‐Food BiorefineryGuangxi Key Laboratory of Bio‐refineryGuangxi Academy of Sciences98 Daling RoadNanning530007China
| | - Kai Huang
- National Engineering Research Center for Non‐Food BiorefineryGuangxi Key Laboratory of Bio‐refineryGuangxi Academy of Sciences98 Daling RoadNanning530007China
| | - Xinxing Zhang
- State Key Laboratory of Polymer Materials EngineeringPolymer Research Institute of Sichuan UniversityNo.24 South Section 1, Yihuan RoadChengdu610065China
| |
Collapse
|
44
|
Construction of MoS 2/Mxene heterostructure on stress-modulated kapok fiber for high-rate sodium-ion batteries. J Colloid Interface Sci 2021; 605:472-482. [PMID: 34340034 DOI: 10.1016/j.jcis.2021.07.097] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2021] [Revised: 07/12/2021] [Accepted: 07/18/2021] [Indexed: 11/21/2022]
Abstract
Molybdenum disulfide (MoS2) has possession of a layered structure and high theoretical capacity, which is a candidate anode material for sodium ion batteries. However, unmodified MoS2 are inflicted with a poor cycling stability and an inferior rate capability upon charge/discharge processes. Considering that the shape and size of anode materials play a key role in the performance of anode materials, this paper proposes a multi-level composite structure formed by the micro-nano materials based on self-assembled molybdenum disulfide (MoS2) nanoflowers, Mxene and hollow carbonized kapok fiber (CKF). The micro-nano materials can be connected to form heterojunction and agglomeration can be avoided. The load bearing of heterostructure and stress release of CKF are coordinated to form a double protection mechanism, which improves the conductivity and structural stability of hybrid materials. Based on the above advantages, it has higher specific capacity than pure MoS2, and has better rate performance (639.3, 409.5, 386.2, 372, 338, 422.8 and 434.7 mAh g-1 at the current density of 0.05, 0.1, 0.2, 0.5, 1 ,0.1 and 0.05 A·g-1, respectively). The stress-modulated strategies can provide new insights for the design and construction of transition metal sulfides heterostructures to achieve high performance sodium ion batteries.
Collapse
|
45
|
Li D, Yuan J, Cheng Q, Wei P, Cheng GJ, Chang C. Additive printing of recyclable anti-counterfeiting patterns with sol-gel cellulose nanocrystal inks. NANOSCALE 2021; 13:11808-11816. [PMID: 34227638 DOI: 10.1039/d1nr01777b] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The assembly of cellulose nanocrystals (CNCs) that produce attractive structural color shows great potential in anti-counterfeiting application, but their processability and recyclability remain unsatisfactory due to the strong hydrogen bonds between CNCs. For the first time, optical anti-counterfeiting patterns are obtained by additive printing of surface-functionalized CNC inks (CNC-DC5700-NPES). The surface-functionalized CNC inks are prepared by sequential modification of CNCs with organosilane (DC5700) and polyoxyethylene ether (NPES), which show good flowability under shearing force and transform into a gel-like phase rapidly after printing, making possible ink-jet printing without additives. The printed patterns are transparent under natural light but show vivid interference color, showing anti-counterfeiting features between crossed polarizers. The texture and optical properties of the printed patterns can be facilely controlled by tuning the printing parameters, such as nozzle diameter, writing angle, and filling width. Moreover, the CNC-DC5700-NPES patterns with a core-shell structure could be collected in various solvents and reprinted after removing solvents. This work provided a new pathway for the preparation of optical anti-counterfeiting patterns from biomass resources.
Collapse
Affiliation(s)
- Dong Li
- College of Chemistry and Molecular Sciences, Engineering Research Center of Natural Polymer-based Medical Materials in Hubei Province, and Laboratory of Biomedical Polymers of Ministry of Education, Wuhan University, Wuhan, 430072, China.
| | | | | | | | | | | |
Collapse
|
46
|
Zhou C, Wang Y. Recycling of waste cotton fabrics into regenerated cellulose films through three solvent systems: A comparison study. J Appl Polym Sci 2021. [DOI: 10.1002/app.51255] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Chufan Zhou
- Department of Food Science and Agricultural Chemistry McGill University Ste Anne de Bellevue Canada
| | - Yixiang Wang
- Department of Food Science and Agricultural Chemistry McGill University Ste Anne de Bellevue Canada
| |
Collapse
|
47
|
Zhang X, Lei Y, Luo X, Wang Y, Li Y, Li B, Liu S. Impact of pH on the interaction between soybean protein isolate and oxidized bacterial cellulose at oil-water interface: Dilatational rheological and emulsifying properties. Food Hydrocoll 2021. [DOI: 10.1016/j.foodhyd.2021.106609] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
48
|
Gu Z, Lu M, Feng K, Jin Z. The different composites of cellulose nanocrystals with d- or l-histidine. NANOSCALE 2021; 13:8174-8180. [PMID: 33881430 DOI: 10.1039/d1nr00946j] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Cellulose nanocrystals (CNCs) are inherently right-handed nanostructures that originate from nature, showing chirality in their fibrils, bundles, and self-assembled films. However, the enantio-specific interaction between CNCs and other chiral molecules has not been explored so far. In this study, we first demonstrated a chirality-related difference in the composite films of cellulose nanocrystals and histidine with a d- or l-configuration. The distinction is not only presented in the self-assembled nanostructures of CNCs, optical properties, and the thermal decomposition of composites but also in the crystallization of the amino acid. We suppose that it might have originated from the packing of amino acids on the twisted surface of CNCs. The knowledge about the enantio-specific interaction between the chiral amino acid and polysaccharide nanostructure is of significant importance for developing a new strategy for enantiomeric separation.
Collapse
Affiliation(s)
- Zehao Gu
- Department of Chemistry, Renmin University of China, Beijing 100872, People's Republic of China.
| | | | | | | |
Collapse
|
49
|
Li Q, Wu Y, Fang R, Lei C, Li Y, Li B, Pei Y, Luo X, ShilinLiu. Application of Nanocellulose as particle stabilizer in food Pickering emulsion: Scope, Merits and challenges. Trends Food Sci Technol 2021. [DOI: 10.1016/j.tifs.2021.02.027] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|