High-Performance Multifunctional Carbon-Silicon Carbide Composites with Strengthened Reduced Graphene Oxide

Investigating the Corrosion Resistance of Different SiC Crystal Types: From Energy Sectors to Advanced Applications

Silicon carbide, as a third-generation semiconductor material, plays a pivotal role in various advanced technological applications. Its exceptional stability under extreme conditions has garnered a significant amount of attention. These superior characteristics make silicon carbide an ideal candidate material for high-frequency, high-power electronic devices and applications in harsh environments. In particular, corrosion resistance in natural or artificially acidic and alkaline environments limits the practical application of many other materials. In fields such as chemical engineering, energy conversion, and environmental engineering, materials often face severe chemical erosion, necessitating materials with excellent chemical stability as foundational materials, carriers, or reaction media. Silicon carbide exhibits outstanding performance under these conditions, demonstrating significant resistance to corrosive substances such as hydrochloric acid, sulfuric acid, nitric acid, and alkaline substances such as potassium hydroxide and sodium hydroxide. Despite the well-known chemical stability of silicon carbide, the stability conditions of its different types (such as 3C-, 4H-, and 6H-SiC polycrystals) in acidic and alkaline environments, as well as the specific corrosion mechanisms and differences, warrant further investigation. This Review not only delves deeply into the detailed studies related to this topic but also highlights the current applications of different silicon carbide polycrystals in chemical reaction systems, energy conversion equipment, and recycling processes. Through a comprehensive analysis, this Review aims to bridge research gaps, offering a comparative analysis of the advantages and disadvantages between different polymorphs. It provides material scientists, engineers, and developers with a thorough understanding of silicon carbide's behavior in various chemical environments. This work will propel the research and development of silicon carbide materials under extreme conditions, especially in areas where chemical stability is crucial for device performance and durability. It lays a solid foundation for ultra-high-power, high-integration, high-reliability module architectures, supercomputing chips, and highly safe long-life batteries.

MOF Derivatives with Gradient Structure Anchored on Carbon Foam for High-Performance Electromagnetic Wave Absorption

The impedance matching and high loss capabilities of composites with homogeneous distribution are limited owing to high addition and lack of structural design. Developing composites with heterogeneous distribution can achieve strong and wide electromagnetic (EM) wave absorption. However, challenges such as complex design and unclear absorption mechanisms still exist. Herein, a novel composite with a heterogeneous distribution gradient is successfully constructed via MOF derivatives Co@ nitrogen-doped carbon (Co@NC) anchored on carbon foam (CF) matrix (MDCF). Notably, the concentration of MOF can easily control the gradient structure. In particular, the morphologies of MOF derivatives on the surface of CF undergo a transition from the collapse of the inner layer to the integrity of the outer layer, accompanied by a continuous reduction in the size of Co nanoparticles. Correspondingly, enhanced interface polarization from the core-shell of Co@NC and good impedance matching of MDCF can be obtained. The optimized MDCF exhibits the minimum reflection loss of -68.18 dB at 2.01 mm and effective absorption bandwidth covering the entire X-band. Moreover, MDCF exhibits lightweight characteristics, excellent compressive strength, and low radar cross-section reduction. This work highlights the immense potential of composites with heterogeneous distribution for achieving high-performance EM wave absorption.

Multifunctional Liquid Metal-Bridged Graphite Nanoplatelets/Aramid Nanofiber Film for Thermal Management

Miniaturization of modern micro-electronic devices urges the development of multi-functional thermal management materials. Traditional polymer composite-based thermal management materials are promising candidates, but they suffer from single functionality, high cost, and low fire-resistance. Herein, a multifunctional liquid metal (LM)-bridged graphite nanoplatelets (GNPs)/ aramid nanofibers (ANFs) film is fabricated via a facile vacuum-assisted self-assembly approach followed by compression. ANFs serve as interfacial binders to link LM and GNPs together via hydrogen bondings and π-π interactions, while LM bridges the adjacent layer of GNPs to endow a fast thermal transport by phonons and electrons. The resultant composite films exhibit a high bidirectional thermal conductivity (In-plane: 29.5 W m-1K-1 and through-plane: 5.3 W m-1K-1), offering a reliable and effective cooling. Moreover, the as-fabricated composite films exhibit superior flame-retardance (peak of heat release rate of 4000J g-1), outstanding Joule heating performance (200 °C at supplied voltage of 3.5 V), and excellent electromagnetic interference shielding effectiveness (EMI SE of 62 dB). This work provides an efficient avenue to fabricate multifuntional thermal management materials for micro-electronic devices, battery thermal management, and artificial intelligence.

Multi-Functional and Flexible Nano-Silver@MXene Heterostructure-Decorated Graphite Felt for Wearable Thermal Therapy

Wearable heaters with multifunctional performances are urgently required for the future personal health management. However, it is still challengeable to fabricate multifunctional wearable heaters simultaneously with flexibility, air-permeability, Joule heating performance, electromagnetic shielding property, and anti-bacterial ability. Herein, silver nanoparticles (AgNPs)@MXene heterostructure-decorated graphite felts are fabricated by introducing MXene nanosheets onto the graphite felts via a simple dip-coating method and followed by a facile in situ growth approach to grow AgNPs on MXene layers. The obtained AgNPs@MXene heterostructure decorated graphite felts not only maintain the intrinsic flexibility, air-permeability and comfort characteristics of the matrixes, but also present excellent Joule heating performance including wide temperature range (30-128 °C), safe operating conditions (0.9-2.7 V), and rapid thermal response (reaching 128 °C within 100 s at 2.7 V). Besides, the multifunctional graphite felts exhibit excellent electromagnetic shielding effectiveness (53 dB) and outstanding anti-bacterial performances (>95% anti-bacterial rate toward Bacillus subtilis, Escherichia coli and Staphy-lococcus aureus). This work sheds light on a novel avenue to fabricate multifunctional wearable heaters for personal healthcare and personal thermal management.

State-of-the-art in carbides/carbon composites for electromagnetic wave absorption

Electromagnetic wave absorbing materials (EWAMs) have made great progress in the past decades, and are playing an increasingly important role in radiation prevention and antiradar detection due to their essential attenuation toward incident EM wave. With the flourish of nanotechnology, the design of high-performance EWAMs is not just dependent on the intrinsic characteristics of single-component medium, but pays more attention to the synergistic effects from different components to generate rich loss mechanisms. Among various candidates, carbides and carbon materials are usually labeled with the features of chemical stability, low density, tunable dielectric property, and diversified morphology/microstructure, and thus the combination of carbides and carbon materials will be a promising way to acquire new EWAMs with good practical application prospects. In this review, we introduce EM loss mechanisms related to dielectric composites, and then highlight the state-of-the-art progress in carbides/carbon composites as high-performance EWAMs, including silicon carbide/carbon, MXene/carbon, molybdenum carbide/carbon, as well as some uncommon carbides/carbon composites and multicomponent composites. The critical information regarding composition optimization, structural engineering, performance reinforcement, and structure-function relationship are discussed in detail. In addition, some challenges and perspectives for the development of carbides/carbon composites are also proposed after comparing the performance of some representative composites.

Development of Electromagnetic-Wave-Shielding Polyvinylidene Fluoride-Ti3C2Tx MXene-Carbon Nanotube Composites by Improving Impedance Matching and Conductivity

Absorption-dominated electromagnetic interference (EMI) shielding is attained by improving impedance matching and conductivity through structural design. Polyvinylidene fluoride (PVDF)-Ti₃C₂T_x MXene-single-walled carbon nanotubes (SWCNTs) composites with layered heterogeneous conductive fillers and segregated structures were prepared through electrostatic flocculation and hot pressing of the PVDF composite microsphere-coated MXene and SWCNTs in a layer-by-layer fashion. Results suggest that the heterogeneous fillers improve impedance matching and layered coating, and hot compression allows the MXene and SWCNTs to form a continuous conducting network at the PVDF interface, thereby conferring excellent conductivity to the composite. The PVDF-MXene-SWCNTs composite showed a conductivity of 2.75 S cm^-1 at 2.5% MXene and 1% SWCNTs. The EMI shielding efficiency (SE) and contribution from absorption loss to the total EMI SE of PVDF-MXene-SWCNTs were 46.1 dB and 85.7%, respectively. Furthermore, the PVDF-MXene-SWCNTs composite exhibited excellent dielectric losses and impedance matching. Therefore, the layered heteroconductive fillers in a segregated structure optimize impedance matching, provide excellent conductivity, and improve absorption-dominated electromagnetic shielding.

Superelastic, Highly Conductive, Superhydrophobic, and Powerful Electromagnetic Shielding Hybrid Aerogels Built from Orthogonal Graphene and Boron Nitride Nanoribbons

Three-dimensional (3D) elastic aerogels enable diverse applications but are usually restricted by their low thermal and electrical transfer efficiency. Here, we demonstrate a strategy for fabricating the highly thermally and electrically conductive aerogels using hybrid carbon/ceramic structural units made of hexagonal boron nitride nanoribbons (BNNRs) with in situ-grown orthogonally structured graphene (OSG). High-aspect-ratio BNNRs are first interconnected into a 3D elastic and thermally conductive skeleton, in which the horizontal graphene layers of OSG provide additional hyperchannels for electron and phonon conduction, and the vertical graphene sheets of OSG greatly improve surface roughness and charge polarization ability of the entire skeleton. The resulting OSG/BNNR hybrid aerogel exhibits very high thermal and electrical conductivity (up to 7.84 W m^-1 K^-1 and 340 S m^-1, respectively) at a low density of 45.8 mg cm^-3, which should prove to be vastly advantageous as compared to the reported carbonic and/or ceramic aerogels. Moreover, the hybrid aerogel possesses integrated properties of wide temperature-invariant superelasticity (from -196 to 600 °C), low-voltage-driven Joule heating (up to 42-134 °C at 1-4 V), strong hydrophobicity (contact angel of up to 156.1°), and powerful broadband electromagnetic interference (EMI) shielding effectiveness (reaching 70.9 dB at 2 mm thickness), all of which can maintain very well under repeated mechanical deformations and long-term immersion in strong acid or alkali solution. Using these extraordinary comprehensive properties, we prove the great potential of OSG/BNNR hybrid aerogel in wearable electronics for regulating body temperature, proofing water and pollution, removing ice, and protecting human health against EMI.

In Situ Fabrication of Magnetic and Hierarchically Porous Carbon Films for Efficient Electromagnetic Wave Shielding and Absorption

Carbon-based materials have been recognized as a promising method to eliminate electromagnetic interference (EMI) shielding and electromagnetic (EM) wave absorption. However, developing lightweight, ultrathin, and efficient EM wave-shielding and wave-absorbing materials remains a challenge. Herein, a series of magnetic porous carbon composite films with a hierarchical network structure were fabricated via pyrolysis of porous polyimide (PI) films containing magnetic metallic salts of Fe(acac)3 and Ni(acac)2. After pyrolysis, the obtained uniform porous carbon films (CFs) possess a favorable EMI-shielding efficiency (SE) of 46 dB in the X-band with a thickness of ∼0.3 mm. In addition, a higher EMI SE of 58 dB can be achieved by increasing the thickness of the porous CF-20Ni to 0.53 mm. Moreover, the CF-20Ni composites also present effective EM wave-absorbing performance of RLmin = - 30.2 dB with a loading amount of 20 wt % at 13.0 GHz owing to the hierarchically conductive carbon skeleton, magnetic Ni nanoparticles, and dielectric interlaced carbon nanotube cluster within the micropores. These novel lightweight and ultrathin porous CFs are expected to be attractive candidates for efficient EM wave absorption and EMI shielding.

Multi-interface Assembled N-Doped MXene/HCFG/AgNW Films for Wearable Electromagnetic Shielding Devices with Multimodal Energy Conversion and Healthcare Monitoring Performances

With the progressive requirements of modern electronics, outstanding electromagnetic interference (EMI) shielding materials are extensively desirable to protect intelligent electronic equipment against EMI radiation under various conditions, while integrating functional applications. So far, it remains a great challenge to effectively construct thin films with diversiform frameworks as integrated shielding devices. To simultaneously promote electromagnetic waves (EMWs) attenuation and construct integrated multifunction, an alternating-layered deposition strategy is designed to fabricate polydimethylsiloxane packaged N-doped MXene (Ti₃CNT_x)/graphene oxide wrapped hollow carbon fiber/silver nanowire films (p-LMHA) followed by annealing and encapsulation approaches. Contributed by the synergistic effect of consecutively conductive networks and porous architectures, LMHA films exhibit satisfying EMI shielding effectiveness of 73.2 dB at a thickness of 11 μm, with a specific EMI shielding effectiveness of 31 150.1 dB·cm²·g^-1. Benefiting from the encapsulation, p-LMHA films further impart hydrophobicity and reliability against harsh environments. Besides, p-LMHA devices integrate a rapid-response behavior of the electro/photothermal and, meanwhile, function as a healthcare monitoring sensor. Therefore, it is believed that the p-LMHA films assembled by independent conductive networks with reliability offer a facile solution for practical multimodular protection of devices with integration characteristics.

Bionic Scarfskin-Inspired Hierarchy Configuration toward Tunable Microwave-Absorbing Performance

Maintaining the dynamical microwave synchronization between a target and its background is the key to electromagnetical invisibility in real environment. Herein, we introduce an archetypical paradigm for ultraelastic films of graphene-functionalized ionic gel with tunable microwave-absorbing behaviors. Inspired by the local structural changes during the wing-spreading process of vespertilionids, the experimental and finite element simulations have revealed that proper shape changing of 3D wrinkled structure containing ridge walls with moderate impedance is the effective way to minimize reflected wave and promote energy attenuation. An optimal RL value of -43.6 dB and valid regulatory amplitude of 41.5 dB, covering a microwave-absorbing to shielding state, could be reached with only 0.2% weight fraction of the active ingredient RGO filler. The significant regulatory performance is attributed to the competitive effect between intrinsic dielectric attenuation of silicon nitride modified reduced graphene oxide (RGO-SiN), multiscattering of a 3D wrinkled structure, and evolution of the oriented RGO-SiN.