Plasmonic Optical Tweezers for Particle Manipulation: Principles, Methods, and Applications

Nanoscale Helical Optical Force for Determining Crystal Chirality

The deterministic control of material chirality has been a sought-after goal. As light possesses intrinsic chirality, light-matter interactions offer promising avenues for achieving non-contact, enantioselective optical induction, assembly, or sorting of chiral entities. However, experimental validations are confined to the microscale due to the limited strength of asymmetrical interactions within sub-diffraction limit ranges. In this study, a novel approach is presented to facilitate chirality modulation through chiral crystallization using a helical optical force field originating from localized nanogap surface plasmon resonance. The force field emerges near a gold trimer nanogap and is propelled by linear and angular momentum transfer from the incident light to the resonant nanogap plasmon. By employing Gaussian and Laguerre-Gaussian incident laser beams, notable enantioselectivity is achieved through low-power plasmon-induced chiral crystallization of an organic compound-ethylenediamine sulfate. The findings provide new insights into chirality transmission orchestrated by the exchange of linear and angular momentum between light and nanomaterials.

Nanoparticle manipulation based on chiral plasmon effects

Chiral plasmonic structures have garnered increasing attention owing to their distinctive chiroptical response. Localized surface plasmon resonance can significantly enhance the circular dichroism and local electromagnetic field of chiral plasmonic structures, resulting in enhanced electromagnetic forces acting on surrounding nanoparticles. Moreover, the circular dichroism response of chiral structures provides an effective means for macroscopic adjustment of microscopic electromagnetic fields. However, chiral plasmon effects are naturally related to angular momentum, and particle control studies of chirality usually focus on angular momentum. This paper proposes a particle manipulation method utilizing chiral light-matter interactions. Through optimization of the optical response of the chiral structure, the direction of electromagnetic forces exerted on surrounding polystyrene particles reverses upon a change in the incident light's handedness. According to this characteristic, the movement direction control of polystyrene particles with a diameter of 100 nm was achieved. By altering the handedness of a single circularly polarized light, more than 94% high-precision particle manipulation was achieved, reducing the complexity of particle manipulation. This microfluidic method has significant implications for advancing microfluidic research and chiral applications.

Moving Meniscus-Assisted Template-Free Optothermofluidic Nanoparticle Patterning and Its Application in Optothermoconvective Particle Trapping

Moving meniscus-assisted vertical lifting is a commonly employed particle assembly technique to realize large-area particle patterning for the easy fabrication of colloidal photonic crystals and sensors. Though great success has been achieved for large-area patterning, inscribing desired patterns over the target substrate with precise control over the morphology remains a challenge. The target substrates need to be functionalized (physically or chemically) to realize desired patterns, which increases the complexity and limits their applicability to specific particle-liquid combinations. We demonstrate a new approach for the precise patterning of gold nanoparticles (Au NPs, diameter ∼60 nm) over solid substrates by the synergy of light-induced Marangoni flow and vertical lifting process (moving meniscus), without the requirement of photomasks or templates. The core idea relies on the particle accumulation due to light-induced Marangoni flow near the liquid meniscus in contact with a solid surface (due to plasmonic absorption of the particles) and the controlled lifting of the substrate. We present both the simulation and experimental results of the developed patterning technique. Various patterns such as continuous lines, intermittent lines with varying lengths, patterns with continuously varying widths, cross patterns, etc. are successfully inscribed. Dynamic control over the three-dimensional morphology of the deposited patterns is achieved by varying the lifting velocity, laser irradiation time, and lifting direction during the inscription process. Finally, we show the applicability of the developed plasmonically active surface for the large-area parallel manipulation of nonabsorbing microparticles based on optothermoconvective flow. The major advantage of the developed method compared to the existing light-controlled patterning techniques is its ability to inscribe patterns over large distances (up to several centimeters). We expect that the results presented in this paper will benefit different applications requiring precise particle patterning, such as optical elements, sensors, plasmonic substrates, microfluidic master templates, and electronic circuits.

Thermometric Analysis of Nanoaperture-Trapped Erbium-Containing Nanocrystals

Temperature changes in plasmonic traps can affect biomolecules and quantum emitters; therefore, several works have sought out the capability of measuring the local temperature. Those works used ionic nanopore currents, fluorescence emission variations, and fluorescence-based diffusion tracking to measure the temperature dependence of shaped nanoapertures in metal films. Here, we make use of a stable erbium-containing NaYF4 nanocrystal that gives local temperature dependence while trapped in the nanoaperture hot spot. Ratiometric analysis of the emission at different wavelengths gives local temperature variation. Since the gold film dominates the thermal characteristic, we find that films of thickness 70, 100, and 130 nm give 0.64, 0.37, and 0.25 K/mW temperature change with laser power. Therefore, using thicker films can be effective in reducing the heating when it is not desired.

Plasmonic nano-bowls for monitoring intra-membrane changes in liposomes, and DNA-based nanocarriers in suspension

Programmable nanoscale carriers, such as liposomes and DNA, are readily being explored for personalized medicine or disease prediction and diagnostics. The characterization of these nanocarriers is limited and challenging due to their complex chemical composition. Here, we demonstrate the utilization of surface-enhanced Raman spectroscopy (SERS), which provides a unique molecular fingerprint of the analytes while reducing the detection limit. In this paper, we utilize a silver coated nano-bowl shaped polydimethylsiloxane (PDMS) SERS substrate. The utilization of nano-bowl surface topology enabled the passive trapping of particles by reducing mobility, which results in reproducible SERS signal enhancement. The biological nanoparticles' dwell time in the nano-trap was in the order of minutes, thus allowing SERS spectra to remain in their natural aqueous medium without the need for drying. First, the geometry of the nano-traps was designed considering nanosized bioparticles of 50-150 nm diameter. Further, the systematic investigation of maximum SERS activity was performed using rhodamine 6 G as a probe molecule. The potential of the optimized SERS nano-bowl is shown through distinct spectral features following surface- (polyethylene glycol) and bilayer- (cholesterol) modification of empty liposomes of around 140 nm diameter. Apart from liposomes, the characterization of the highly crosslinked DNA specimens of only 60 nm in diameter was performed. The modification of DNA gel by liposome coating exhibited unique signatures for nitrogenous bases, sugar, and phosphate groups. Further, the unique sensitivity of the proposed SERS substrate displayed distinct spectral signatures for DNA micelles and drug-loaded DNA micelles, carrying valuable information to monitor drug release. In conclusion, the findings of the spectral signatures of a wide range of molecular complexes and chemical morphology of intra-membranes in their natural state highlight the possibilities of using SERS as a sensitive and instantaneous characterization alternative.

Spectral tweezers: Single sample spectroscopy using optoelectronic tweezers

A scheme that combines optoelectronic tweezers (OET) with spectroscopic analysis is presented. Referred to as spectral tweezers, the approach uses a single focused light beam that acts both as the trapping beam for OET and the probe beam for spectroscopy. Having simultaneous manipulation and spectral characterization ability, the method is used to isolate single micro-samples from clusters and perform spectral measurements. Experimental results show that a characteristic spectral signature can be obtained for a given sample. The proposed approach can be easily integrated into the optical setups used for conventional OETs with only a few additional optical components, making it a convenient tool for bio-analytical applications.

Elasto-inertial microfluidic separation of microspheres with submicron resolution at high-throughput

Elasto-inertial microfluidic separation offers many advantages including high throughput and separation resolution. Even though the separation efficiency highly depends on precise control of the flow conditions, no concrete guidelines have been reported yet in elasto-inertial microfluidics. Here, we propose a dimensionless analysis for precise estimation of the microsphere behaviors across the interface of Newtonian and viscoelastic fluids. Reynolds number, modified Weissenberg number, and modified elastic number are used to investigate the balance between inertial and elastic lift forces. Based on the findings, we introduce a new dimensionless number defined as the width of the Newtonian fluid stream divided by microsphere diameter. The proposed dimensionless analysis allows us to predict whether the microspheres migrate across the co-flow interface. The theoretical estimation is found to be in good agreement with the experimental results using 2.1- and 3.2-μm-diameter polystyrene microspheres in a co-flow of water and polyethylene oxide solution. Based on the theoretical estimation, we also realize submicron separation of the microspheres with 2.1 and 2.5 μm in diameter at high throughput, high purity (>95%), and high recovery rate (>97%). The applicability of the proposed method was validated by separation of platelets from similar-sized Escherichia coli (E.coli).

Enhanced trapping properties induced by strong LSPR-exciton coupling in plasmonic tweezers

Plasmonic tweezers break the diffraction limit and enable trap the deep-subwavelength particles. However, the innate scattering properties and the photothermal effect of metal nanoparticles pose challenges to their effective trapping and the non-damaging trapping of biomolecules. In this study, we investigate the enhanced trapping properties induced by strong coupling between localized surface plasmon resonances (LSPR) and excitons in plasmonic tweezers. The LSPR-exciton strong coupling exhibits an anticrossing behavior in dispersion curves with a markable Rabi splitting of 196 meV. Plasmonic trapping forces on excitons experience a significant increase within this strong coupling system due to higher longitudinal enhancement of electric field enhancement, which enables efficient particle trapping using lower laser power and minimizes ohmic heat generation. Moreover, leveraging strong coupling effects allows the successful trapping of a 50 nm Au particle coated with J-aggregates, overcoming previous limitations associated with scattering characteristics and smaller size that hindered effective metal nanoparticle manipulation. These findings open up new possibilities for the nondestructive trapping of biomolecules and metal nanoparticles across various applications.

Efficient optical plasmonic tweezer-controlled single-molecule SERS characterization of pH-dependent amylin species in aqueous milieus

It is challenging to characterize single or a few biomolecules in physiological milieus without excluding the influences of surrounding environment. Here we utilize optical plasmonic trapping to construct a dynamic nanocavity, which reduces the diffraction-limited detection volume and provides reproducible electromagnetic field enhancements to achieve high-throughput single-molecule surface-enhanced Raman spectroscopy (SERS) characterizations in aqueous environments. Specifically, we study human Islet Amyloid Polypeptide (amylin, hIAPP) under different physiological pH conditions by combining spectroscopic experiments and molecular dynamics (MD) simulations. Based on a statistically significant amount of time-dependent SERS spectra, two types of low-populated transient species of hIAPP containing either turn or β-sheet structure among its predominant helix-coil monomers are characterized during the early-stage incubation at neutral condition, which play a crucial role in driving irreversible amyloid fibril developments even after a subsequent adjustment of pH to continue the prolonged incubation at acidic condition. Our results might provide profound mechanistic insight into the pH-regulated amyloidogenesis and introduce an alternative approach for investigating complex biological processes at the single-molecule level.

Selective plasmonic trapping of nano-particles by Archimedes metalens

Optical tweezer is a non-invasive method for optical force tool applied in various fields like biology, physics, and lab on chip manipulation. The Archimedean helix shape is ideal for creating chiral nanostructures, and being able to generate plasmonic focused hotspot field for optical trapping. Here we design a metal disk with the Archimedean shape to own the ability of selective trapping nanoparticles based on the spin-orbit interactions with circularly polarized light. The plasmonic near field on the metalens can be designed by adjusting the geometric parameter flexibly. We numerically analyze the optimal size and screw pitch of the metal disk to realize the switch modulation of hotspot generation, and then demonstrate the novel switchable optical trapping ability in the view of optical force and potential well analysis under the circularly polarized light excitation by a 532 nm laser. The work shows significant potential for on-chip optical trapping in various fields.

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

Lateral flow assays (LFAs) are currently the most widely used point-of-care testing technique with remarkable advantages such as simple operation, rapid analysis, portability, and low cost. Traditionally, gold nanoparticles are employed as tracer element in LFAs due to their strong localised surface plasmon resonance. However, this conventional LFA technique based on colorimetric analysis is neither useful to determine critical analytes with desired sensitivity, nor can it quantify the analytes. Various signal amplification strategies have been proposed to improve the sensitivity and the quantitative determination of analytes using LFAs. One of the promising strategies is to enhance the photothermal properties of nanomaterials to generate heat after light irradiation, followed by a temperature measurement to detect and quantify the analyte concentration. Recently, it has been observed that the nanoscale architecture of materials, including size, shape, and nanoscale composition, plays a significant role in enhancing the photothermal properties of nanomaterials. In this review, we discuss the nanoarchitectonics of nanomaterials regarding enhanced photothermal properties and their application in LFAs. Initially, we discuss various important photothermal materials and their classification along with their working principle. Then, we highlight important aspects of the nanoscale architecture (i.e., size, shape, and composition) to enable maximum light-to-heat conversion efficiency. Finally, we discuss some of the recent advances in photothermal LFAs and their application in detecting analytes.

Influence of plasmons on the luminescence properties of solvatochromic merocyanine dyes with different solvatochromism

The effect of localized surface plasmon resonance (LSPR) of a system consisting of a highly dipolar merocyanine dye and a silver nanoparticle (NP) was studied experimentally and theoretically. A theoretical model for estimating the fluorescence quantum yield (φfl) using quantum chemical calculations of intramolecular and intermolecular electronic transition rate constants was developed. Calculations show that the main deactivation channels of the lowest excited singlet state of the studied merocyanines are internal conversion (kIC(S1 → S0)) and fluorescence (kr(S1 → S0)). The intersystem-crossing transition has a low probability due to the large energy difference between the singlet and triplet levels. In the presence of plasmonic NPs, the fluorescence quantum yield is increased by a factor of two according to both experiment and computations. The calculated values of φfl, when considering changes in kr(S1 → S0) and the energy-transfer rate constant (ktransfer) from the dye to the NP was also twice as large at distances of 6-8 nm between the NP and the dye molecule. We also found that the LSPR effect can be increased or decreased depending on the value of the dielectric constant (εm) of the environment.

Optimized design and experimental study of a macroscopic mirror to achieve linear amplification of optical force-induced displacement

A new thin plane mirror with an Archimedes spiral structure (Archimedes-structure thin plane mirror - ATPM) that implements an elastic support boundary is proposed in this study. An optimal structure of ATPM is developed to achieve a linear displacement response with respect to optical forces. The displacement response of the optimized ATPM is analyzed by considering the combined effects of optical force and gravity. The distribution of the optical force density is calculated based on a tilted Gaussian laser beam. Experimental results demonstrate that the optimized ATPM can produce a steady-state displacement of 24.18 nm on average in a normal-gravity environment when subjected to an average optical force of 132.17 nN. When the optical force exceeds 133 nN, the nonlinearity of the displacement response of the optimized ATPM is less than 6.28%. An amplification of the optical force-induced displacement is achieved by more than 15 times compared with that for an unstructured mirror of the same size. The results of this study can assist the development of a miniaturized macroscale optical force platform based on an ATPM for practical applications including the in-situ laser power measurement and nN level force source in the atomic and close-to-atomic scale manufacturing.

Plasmonic Nanostructure Engineering with Shadow Growth

Physical shadow growth is a vacuum deposition technique that permits a wide variety of 3D-shaped nanoparticles and structures to be fabricated from a large library of materials. Recent advances in the control of the shadow effect at the nanoscale expand the scope of nanomaterials from spherical nanoparticles to complex 3D shaped hybrid nanoparticles and structures. In particular, plasmonically active nanomaterials can be engineered in their shape and material composition so that they exhibit unique physical and chemical properties. Here, the recent progress in the development of shadow growth techniques to realize hybrid plasmonic nanomaterials is discussed. The review describes how fabrication permits the material response to be engineered and highlights novel functions. Potential fields of application with a focus on photonic devices, biomedical, and chiral spectroscopic applications are discussed.

Resolution improvement of optoelectronic tweezers using patterned electrodes

An optoelectronic tweezer (OET) device is presented that exhibits improved trapping resolution for a given optical spot size. The scheme utilizes a pair of patterned physical electrodes to produce an asymmetric electric field gradient. This, in turn, generates an azimuthal force component in addition to the conventional radial gradient force. Stable force equilibrium is achieved along a pair of antipodal points around the optical beam. Unlike conventional OETs where trapping can occur at any point around the beam perimeter, the proposed scheme improves the resolution by limiting trapping to two points. The working principle is analyzed by performing numerical analysis of the electromagnetic fields and corresponding forces. Experimental results are presented that show the trapping and manipulation of micro-particles using the proposed device.

Microfluidic systems for particle capture and release: A review

Microfluidic technology has emerged as a promising tool in various applications, including biosensing, disease diagnosis, and environmental monitoring. One of the notable features of microfluidic devices is their ability to selectively capture and release specific cells, biomolecules, bacteria, and particles. Compared to traditional bulk analysis instruments, microfluidic capture-and-release platforms offer several advantages, such as contactless operation, label-free detection, high accuracy, good sensitivity, and minimal reagent requirements. However, despite significant efforts dedicated to developing innovative capture mechanisms in the past, the release and recovery efficiency of trapped particles have often been overlooked. Many previous studies have focused primarily on particle capture techniques and their efficiency, disregarding the crucial role of successful particle release for subsequent analysis. In reality, the ability to effectively release trapped particles is particularly essential to ensure ongoing, high-throughput analysis. To address this gap, this review aims to highlight the importance of both capture and release mechanisms in microfluidic systems and assess their effectiveness. The methods are classified into two categories: those based on physical principles and those using biochemical approaches. Furthermore, the review offers a comprehensive summary of recent applications of microfluidic platforms specifically designed for particle capture and release. It outlines the designs and performance of these devices, highlighting their advantages and limitations in various target applications and purposes. Finally, the review concludes with discussions on the current challenges faced in the field and presents potential future directions.

Small-Scale Robotics with Tailored Wettability

Small-scale robots (SSRs) have emerged as promising and versatile tools in various biomedical, sensing, decontamination, and manipulation applications, as they are uniquely capable of performing tasks at small length scales. With the miniaturization of robots from the macroscale to millimeter-, micrometer-, and nanometer-scales, the viscous and surface forces, namely adhesive forces and surface tension have become dominant. These forces significantly impact motion efficiency. Surface engineering of robots with both hydrophilic and hydrophobic functionalization presents a brand-new pathway to overcome motion resistance and enhance the ability to target and regulate robots for various tasks. This review focuses on the current progress and future perspectives of SSRs with hydrophilic and hydrophobic modifications (including both tethered and untethered robots). The study emphasizes the distinct advantages of SSRs, such as improved maneuverability and reduced drag forces, and outlines their potential applications. With continued innovation, rational surface engineering is expected to endow SSRs with exceptional mobility and functionality, which can broaden their applications, enhance their penetration depth, reduce surface fouling, and inhibit bacterial adhesion.

Near-field manipulation of Tamm plasmon polaritons

Tamm plasmon polaritons (TPPs) arise from electromagnetic resonant phenomena which appear at the interface between a metallic film and a distributed Bragg reflector. They differ from surface plasmon polaritons (SPPs), since TPPs possess both cavity mode properties and surface plasmon characteristics. In this paper, the propagation properties of TPPs are carefully investigated. With the aid of nanoantenna couplers, polarization-controlled TPP waves can propagate directionally. By combining nanoantenna couplers with Fresnel zone plates, asymmetric double focusing of TPP wave is observed. Moreover, radial unidirectional coupling of the TPP wave can be achieved when the nanoantenna couplers are arranged along a circular or a spiral shape, which shows superior focusing ability compared to a single circular or spiral groove since the electric field intensity at the focal point is 4 times larger. In comparison with SPPs, TPPs possess higher excitation efficiency and lower propagation loss. The numerical investigation shows that TPP waves have great potential in integrated photonics and on-chip devices.

Topological visualization of the plasmonic resonance of a nano C-aperture

The plasmonic response of a nano C-aperture is analyzed using the Vector Field Topology (VFT) visualization technique. The electrical currents that are induced on the metal surfaces when the C-aperture is excited by light is calculated for various wavelengths. The topology of this two-dimensional current density vector is analyzed using VFT. The plasmonic resonance condition is found to coincide with a distinct shift in the topology which leads to increased current circulation. A physical explanation of the phenomenon is discussed. Numerical results are presented to justify the claims. The analyses suggest that VFT can be a powerful tool for studying the physical mechanics of nano-photonic structures.

Graphene-based Pancharatnam-Berry phase metasurface in the terahertz domain for dynamically independent amplitude and phase manipulation

Dynamic and independent amplitude and phase manipulation are the paramount demand for many advanced wavefronts engineering applications. Currently, the coupling issue between the amplitude and phase hinders the efficient modulation wavefront's further implementation. This paper proposes and numerically demonstrates the bi-layer stacked graphene Pancharatnam-Berry (P-B) phase metasurface and mono-layer graphene P-B phase metasurface to address the above problem. The simulation results show that the proposed models can achieve the independent control amplitude and phase and significantly reduce their coupling strength. Our findings offer a flexible and straightforward method for precise wave reconstruction applications such as holography, optical tweezers, and high-resolution imaging.

Optical performance analysis of InP nanostructures for photovoltaic applications

In this article, we have performed a comparative analysis of six different types of nanostructures that can improve photon management for photovoltaic applications. These nanostructures act as anti-reflective structures by improving the absorption characteristics and tailoring the optoelectronic properties of the associated devices. The absorption enhancement in indium phosphide (InP) and silicon (Si) based cylindrical nanowires (CNWs) and rectangular nanowires (RNWs), truncated nanocones (TNCs), truncated nanopyramids (TNPs), inverted truncated nanocones (ITNCs), and inverted truncated nanopyramids (ITNPs) are computed using the finite element method (FEM) based commercial COMSOL Multiphysics package. The influence of geometrical dimensions of the investigated nanostructures such as period (P), diameter (D), width (W), filling ratio (FR), bottom W and D (W_bot/D_bot), and top W and D (W_top/D_top) on the optical performance are analyzed in detail. Optical short circuit current density (J_sc) is computed using the absorption spectra. The results of numerical simulations indicate that InP nanostructures are optically superior to Si nanostructures. In addition to this, the InP TNP generates an optical short circuit current density (J_sc) of 34.28 mA cm⁻², which is ∼10 mA cm⁻² higher than its Si counterpart. The effect of incident angle on the ultimate efficiency of the investigated nanostructures in transverse electric (TE) and transverse magnetic (TM) modes is also explored. Theoretical insights into the design strategies of different nanostructures proposed in this article will act as a benchmark for choosing the device dimensions of appropriate nanostructures for the fabrication of efficient photovoltaic devices.

The optical performance of different indium phosphide (InP) nanostructures are investigated using Wave Optics Module of COMSOL Multiphysics. Our results indicate that InP based nanostructures outperform silicon based nanostructures.

Influence of the temperature-dependent dielectric constant on the photoacoustic effect of gold nanospheres

Photoacoustic imaging techniques with gold nanoparticles as contrast agents have received a great deal of attention. The photoacoustic response of gold nanoparticles strongly depends on the far-field optical properties, which essentially depend on the dielectric constant of the material. The dielectric constant of gold not only varies with wavelength but is also affected by temperature. However, the effect of the temperature dependence of the dielectric constant on gold nanoparticles' photoacoustic response has not been fully investigated. In this work, the Drude-Lorentz model and Mie theory are used to calculate the dielectric constant and absorption efficiency of gold nanospheres in aqueous solution, respectively. Then, the finite element method is used to simulate the heat transfer process of gold nanospheres and surrounding water. Finally, the one-dimensional velocity-stress equation is solved by the finite-difference time-domain method to obtain the photoacoustic response of gold nanospheres. The results show that under the irradiation of a high-fluence nanosecond pulse laser, ignoring the temperature dependence of the dielectric constant will lead to large errors in the photothermal response and the nonlinear photoacoustic signals (it can even exceed 20% and 30%). The relative error of the photothermal and photoacoustic response caused by ignoring the temperature-dependent dielectric constant is determined from both the temperature dependence of absorption efficiency and the maximum temperature increase of gold nanospheres. This work provides a new perspective for the photothermal and photoacoustic effects of gold nanospheres, which is meaningful for the development of high-resolution photoacoustic detectors and nano/microscale temperature measurement techniques.

Dynamically controllable plasmonic tweezers using C-shaped nano-engravings

A near-field optical trapping scheme using plasmonic C-shaped nano-engraving is presented. Utilizing the polarization sensitivity of the C-structure, a mechanism is proposed for dynamically controlling the electric field, the associated trapping force, and the plasmonic heating. Electromagnetic analysis and particle dynamics simulations are performed to verify the viability of the approach. The designed structure is fabricated and experimentally tested. Polarization control of the excitation light is achieved through the use of a half-wave plate. Experimental results are presented that show the functioning implementation of the dynamically adjustable plasmonic tweezers. The dynamic controllability can allow trapping to be maintained with lower field strengths, which reduces photo-thermal effects. Thus, the probability of thermal damage can be reduced when handling sensitive specimens.

Plasmofluidic-Based Near-Field Optical Trapping of Dielectric Nano-Objects Using Gold Nanoislands Sensor Chips

Near-field optical manipulation has been widely used for guiding and trapping nanoscale objects close to an optical-active interface. This near-field manipulation opens opportunities for next-generation biosensing with the capability of large-area trapping and in situ detection. In this article, we used the finite element method (FEM) to analyze the motion mechanism of nano-objects (50-500 nm) in the near-field optics, especially localized surface plasmon resonance (LSPR). The size-dependent optical forces and hydrodynamic forces of subwavelength nanoparticles (<500 nm) in different hydrodynamic velocity fields were calculated. When the strength of the local electric field was increased, LSPR with two-dimensional gold nanoislands (AuNIs) showed improved capability for manipulating nano-objects near the vicinity of the AuNI interface. Through the experiments of in situ interferometric testing 50-500 nm nano-objects with constant number concentration or volume fraction, it was confirmed that the local plasmonic near-field was able to trap the dielectric polystyrene beads smaller than 200 nm. The plasmofluidic system was further verified by testing biological nanovesicles such as exosomes (40-200 nm) and high- and low-density lipoproteins (10-200 nm). This concept of direct dielectric nano-objects manipulation enables large-scale parallel trapping and dynamic sensing of biological nanovesicles without the need of molecular binding tethers or labeling.

3D Optical Heterostructure Patterning by Spatially Allocating Nanoblocks on a Printed Matrix

Heterostructures have attracted enormous interest due to the properties arising from the coupling and synergizing between multiscale structures and the promising applications in electronics, mechanics, and optics. However, it is challenging for current technologies to precisely integrate cross-scale micro/nanomaterials in three dimensions (3D). Herein, we realize the precise spatial allocation of nanoblocks on micromatrices and programmable 3D optical heterostructure patterning via printing-assisted self-assembly. This bottom-up approach fully exploits the advantages of printing in on-demand patterning, low cost, and mass production, as well as the merits of solution-based colloidal assembly for simple structuring and high-precision regulating, which facilitates the patterned integration of multiscale materials. Importantly, the luminescent nanoparticle assembly can be accurately coupled to the dye-doped polymer matrix by regulating the interface wettability, enabling facile multicolor tuning in a single heterostructure. Thus, the heterostructure can be specially encoded for anticounterfeiting and encryption applications due to the morphology-dependent and interface-coupling-induced luminescence. Moreover, with the capability to achieve single-nanoparticle resolution, these findings have great potential for designing photonic superstructures and advanced optical devices.

Nanoparticle manipulation using plasmonic optical tweezers based on particle sizes and refractive indices

As an effective tool for micro/nano-scale particle manipulation, plasmonic optical tweezers can be used to manipulate cells, DNA, and macromolecules. Related research is of great significance to the development of nanoscience. In this work, we investigated a sub-wavelength particle manipulation technique based on plasmonic optical tweezers. When the local plasmonic resonance is excited on the gold nanostructure arrays, the local electromagnetic field will be enhanced to generate a strong gradient force acting on nanoparticles, which could achieve particle sorting in sub-wavelength scale. On this basis, we explored the plasmonic enhancement effect of the sorting device and the corresponding optical force and optical potential well distributions. Additionally, the sorting effect of the sorting device was investigated in statistical methods, which showed that the sorting device could effectively sort particles of different diameters and refractive indices.

Photothermal conversion and transfer in photothermal therapy: From macroscale to nanoscale

Photothermal therapy (PTT) is a promising alternative therapy for benign or even malignant tumors. To improve the selective heating of tumor cells, target-specific photothermal conversion agents are often included, especially nanoparticles. Meanwhile, some indirect methods by manipulating the radiation and heat delivery are also adopted. Therefore, to gain a clear understanding of the mechanism, and to improve the controllability of PTT, a few issues need to be clarified, including bioheat and radiation transfer, localized and collective heating of nanoparticles, etc. In this review, we provide an introduction to the typical bioheat transfer and radiation transfer models along with the dynamic thermophysical properties of biological tissue. On this basis, we reviewed the most recent advances in the temperature control methods in PTT from macroscale to nanoscale. Most importantly, a comprehensive introduction of the localized and collective heating effects of nanoparticle clusters is provided to give a clear insight into the mechanism for PPT from the microscale and nanoscale point of view.

Manipulation of a Single Metal Nanowire by an Unpolarized Gaussian Beam

Optical manipulation of metal nanowires offers a promising route to building optoelectronic nanosystems, which remains a challenge because of their strong absorption or scattering properties. Here, precise optical manipulation of a single Ag nanowire, including capture, translation, rotation, immobilization, and release, was readily achieved within a large operation range of 100 μm by a single unpolarized Gaussian beam based on an optical scattering force. Besides, the optical forces and torques exerted on the Ag nanowires under different conditions were quantitatively analyzed and calculated by simulation to give insight into the manipulation mechanism. This proposed scattering-force-based optical manipulation method also has great position and orientation stability with a capture stiffness of 1.2 pN/μm and an orientation standard deviation of 0.3°. More surprisingly, it is independent of both laser polarization and the metal material, shape, and size and is a universal and promising strategy for the manipulation and assembly of nontransparent structures in mesoscopic/Mie sizes.

Accumulation, Directional Delivery and Release of Nanoparticles along a Nanofiber

Controllably accumulating and delivering nanoparticles (NPs) into specific locations are a central theme of nano-engineering and important for targeted therapy or bacteria removal. Here we present a technique allowing bidirectional accumulation, directional delivery and release of nanoparticles through two 980-nm-wavelength counter-propagating evanescent waves in an optical nanofiber (NF). Using 713-nm-diameter polystyrene NPs suspension and an 890-nm-diameter NF as an example, we experimentally and theoretically demonstrate that the NPs delivered along the NF surface in opposite directions are accumulated into the region where the scattering loss of the NPs is maximum, and about 90% of the incident optical field from both ends of the NF can be coupled into the region. Moreover, the accumulation region can be controlled by altering the incident optical power ratio of the two counter-propagating laser beams, while the accumulated NPs can be delivered and then released into the specific locations by turning off the two lasers.

Controllable transportation of microparticles along structured waveguides by the plasmonic spin-hall effect

With the nanoscale integration advantage of near field photonics, controllable manipulation and transportation of micro-objects have possessed plentiful applications in the fields of physics, biology and material sciences. However, multifunctional optical manipulation like controllable transportation and synchronous routing by nano-devices are limited and rarely reported. Here we propose a new type of Y-shaped waveguide optical conveyor belt, which can transport and route particles along the structured waveguide based on the plasmonic spin-hall effect. The routing of micro-particles in different branches is determined by the optical force components difference at the center of the Y junction along the two branches of the waveguide. The influence of light source and structural parameters on the optical forces and transportation capability are numerically studied. The results illustrate that the proposed structured waveguide optical conveyor belt can transport the microparticles controllably in different branches of the waveguide. Due to the selective transportation ability of microparticles by the 2D waveguide, our work shows great application potential in the region of on-chip optical manipulation.

Fast, Economical, and Reproducible Sensing from a 2D Si Wire Array: Accurate Characterization by Single Wire Spectroscopy

Silicon (Si) is promising as a field enhancement material because of its high abundance, low toxicity, and high refractive index. The field enhancement effect intensifies light-matter interactions, which improves photocatalysis, solar cell performance, and sensor sensitivity. To manufacture field enhancement materials on a production scale, the fabrication technique must be simple, cost-effective, fast, and highly reproducible and must produce a high enhancement factor (EF). Herein, we report on an economical and efficient fabrication method for a field enhancement substrate consisting of a two-dimensional Si wire array (2D-SiWA). This substrate was demonstrated as a fluorescence sensor with high sensitivity (EF > 200) and composed of a large area (6.0 mm²). In addition, single wire spectroscopy was used to identify very high reproducibility of the sensor sensitivity in regular regions (97%) and a mixture of regular and irregular regions (87%) of the 2D-SiWA. The large-area Si fluorescence sensor fabrication was cost-effective and rapid and was 50× less expensive, 20×faster, and 60,000×larger than the typical electron beam lithography method.

Directivity-Enhanced Detection of a Single Nanoparticle Using a Plasmonic Slot Antenna

In situ refractive index sensors integrated with nanoaperture-based optical tweezers possess stable and sensitive responsivity to single nanoparticles. In most existing works, detection events are only identified using the total light intensity with directivity information ignored, leading to a low signal-to-noise ratio. Here, we propose to detect an optically trapped 20 nm silica particle by monitoring directivity of a plasmonic antenna. The main and secondary radiation lobes of the antenna reverse upon trapping because the particle-induced perturbation negates the relative phase between two antenna elements, leading to a significant change of the antenna front-to-back ratio. As a result, we obtain a signal-to-noise ratio of 20, with an order-of-magnitude improvement as compared to the intensity-only detection scheme.

Dependence of the Nonlinear Photoacoustic Response of Gold Nanoparticles on the Heat-Transfer Process

Photoacoustic (PA) imaging using the nonlinear PA response of gold nanoparticles (GNPs) can effectively attenuate the interference from background noise caused by biomolecules (e.g., hemoglobin), thus offering a highly potential noninvasive biomedical imaging method. However, the mechanism of the nonlinear PA response of GNPs based on the thermal expansion mechanism, especially the effect of heat-transfer ability, still lacks quantitative investigation. Therefore, this work investigated the effect of heat-transfer ability on the nonlinear PA response of GNPs using the critical energy and fluence concept, taking into account the Au@SiO2 core-shell nanoparticles (weakened heat transfer) and gold nanochains (enhanced heat transfer). The results showed that the stronger the heat transferability, the smaller the critical energy, indicating that the nonlinear PA response of different nanoparticles cannot be contrasted directly through the critical energy. Moreover, the critical fluence can directly contrast the proportion of nonlinear components in the PA response of different GNPs as governed by the combined effect of heat transferability and photothermal conversion ability.

Single Photon Source from a Nanoantenna-Trapped Single Quantum Dot

Single photon sources with high brightness and subnanosecond lifetimes are key components for quantum technologies. Optical nanoantennas can enhance the emission properties of single quantum emitters, but this approach requires accurate nanoscale positioning of the source at the plasmonic hotspot. Here, we use plasmonic nanoantennas to simultaneously trap single colloidal quantum dots and enhance their photoluminescence. The nano-optical trapping automatically locates the quantum emitter at the nanoantenna hotspot without further processing. Our dedicated nanoantenna design achieves a high trap stiffness of 0.6 (fN/nm)/mW for quantum dot trapping, together with a relatively low trapping power of 2 mW/μm². The emission from the nanoantenna-trapped single quantum dot shows 7× increased brightness, 50× reduced blinking, 2× shortened lifetime, and a clear antibunching below 0.5 demonstrating true single photon emission. Combining nano-optical tweezers with plasmonic enhancement is a promising route for quantum technologies and spectroscopy of single nano-objects.