Room-temperature Near-infrared Excitonic Lasing from Mechanically Exfoliated InSe Microflake

Strong Linearly Polarized Light Emission by Coupling Out-of-Plane Exciton to Anisotropic Gap Plasmon Nanocavity

With exceptional quantum confinement, 2D monolayer semiconductors support a strong excitonic effect, making them an ideal platform for exploring light-matter interactions and as building blocks for novel optoelectronic devices. Different from the well-known in-plane excitons in transition metal dichalcogenides (TMD), the out-of-plane excitons in indium selenide (InSe) usually show weak emission, which limits their applications as light sources. Here, by embedding InSe in an anisotropic gap plasmon nanocavity, we have realized plasmon-enhanced linearly polarized photoluminescence with an anisotropic ratio up to ∼140, corresponding to degree of polarization (DoP) of ∼98.6%. Such polarization selectivity, originating from the polarization-dependent plasmonic enhancement supported by the "nanowire-on-mirror" nanocavity, can be well tuned by the InSe thickness. Moreover, we have also realized an InSe-based light-emitting diode with polarized electroluminescence. Our research highlights the role of excitonic dipole orientation in designing nanophotonic devices and paves the way for developing InSe-based optoelectronic devices with polarization control.

Giant Out-of-Plane Exciton Emission Enhancement in Two-Dimensional Indium Selenide via a Plasmonic Nanocavity

Out-of-plane (OP) exciton-based emitters in two-dimensional semiconductor materials are attractive candidates for novel photonic applications, such as radially polarized sources, integrated photonic chips, and quantum communications. However, their low quantum efficiency resulting from forbidden transitions limits their practicality. In this work, we achieve a giant enhancement of up to 34000 for OP exciton emission in indium selenide (InSe) via a designed Ag nanocube-over-Au film plasmonic nanocavity. The large photoluminescence enhancement factor (PLEF) is attributed to the induced OP local electric field (E_z) within the nanocavity, which facilitates effective OP exciton-plasmon interaction and subsequent tremendous enhancement. Moreover, the nanoantenna effect resulting from the effective interaction improves the directivity of spontaneous radiation. Our results not only reveal an effective photoluminescence enhancement approach for OP excitons but also present an avenue for designing on-chip photonic devices with an OP dipole orientation.

Probing Anisotropic Deformation and Near-Infrared Emission Tuning in Thin-Layered InSe Crystal under High Pressure

Indium selenide (InSe) exhibits high lattice compressibility and an extraordinary capability of tailoring the optical band gap under pressure beyond other 2D materials. Herein, by applying hydrostatic pressure via a diamond anvil cell, we revealed an anisotropic deformation dynamic and efficient manipulation of near-infrared light emission in thin-layered InSe strongly correlated to layer numbers (N = 5-30). As N > 20, the InSe lattice is compressed in all directions, and the intralayer compression leads to widening of the band gap, resulting in an emission blue shift (∼120 meV at 1.5 GPa). In contrast, as N ≤ 15, an efficient emission red shift is observed from band gap shrinkage (rate of 100 meV GPa^-1), which is attributed to the predominant uniaxial interlayer compression because of the high strain resistance along the InSe-diamond interface. These findings advance the understanding of pressure-induced lattice deformation and optical transition evolution in InSe and could be applied to other 2D materials.

Strong Exciton-Exciton Scattering of Exfoliated van der Waals InSe toward Efficient Continuous-Wave Near-Infrared P-Band Emission

P-band emission is a superlinear low-coherence emission through exciton-exciton (X-X) scattering into photon-like states. It occurs without the prerequisites of population inversion or macroscopical coherence, rendering lower power consumption than the widely explored superlinear low-coherence emissions including superfluorescence, amplified spontaneous emission, and random lasing, and holds great potential for speckle-free imaging and interferometric sensing. However, competition processes including exciton dissociation and annihilation undermine its operation at room temperature and/or low excitation conditions. Here we report room-temperature P-band emission from InSe microflakes with excitation density of 10¹⁰ cm^-2, offering 2-orders-of-magnitude lower operation density compared to the state-of-the-art superlinear low-coherence emissions. The efficient P-band emission is attributed to a large X-X scattering strength of 0.25 μeV μm² due to enhanced spatial confinement along with intrinsic material metrics of 3D/2D exciton complex and asymmetric electron/hole mass. These findings open an avenue toward strong low-coherence near-infrared light sources based on van der Waals semiconductors.

Infrared Light Emission Devices Based on Two-Dimensional Materials

Two-dimensional (2D) materials have garnered considerable attention due to their advantageous properties, including tunable bandgap, prominent carrier mobility, tunable response and absorption spectral band, and so forth. The above-mentioned properties ensure that 2D materials hold great promise for various high-performance infrared (IR) applications, such as night vision, remote sensing, surveillance, target acquisition, optical communication, etc. Thus, it is of great significance to acquire better insight into IR applications based on 2D materials. In this review, we summarize the recent progress of 2D materials in IR light emission device applications. First, we introduce the background and motivation of the review, then the 2D materials suitable for IR light emission are presented, followed by a comprehensive review of 2D-material-based spontaneous emission and laser applications. Finally, further development directions and challenges are summarized. We believe that milestone investigations of 2D-material-based IR light emission applications will emerge soon, which are beneficial for 2D-material-based nano-device commercialization.

On-chip photonics and optoelectronics with a van der Waals material dielectric platform

During the last few decades, photonic integrated circuits have increased dramatically, facilitating many high-performance applications, such as on-chip sensing, data processing, and inter-chip communications. The currently dominating material platforms (i.e., silicon, silicon nitride, lithium niobate, and indium phosphide), which have exhibited great application successes, however, suffer from their own disadvantages, such as the indirect bandgap of silicon for efficient light emission, and the compatibility challenges of indium phosphide with the silicon industry. Here, we report a new dielectric platform using nanostructured bulk van der Waals materials. On-chip light propagation, emission, and detection are demonstrated by taking advantage of different van der Waals materials. Low-loss passive waveguides with MoS2 and on-chip light sources and photodetectors with InSe have been realised. Our proof-of-concept demonstration of passive and active on-chip photonic components endorses van der Waals materials for offering a new dielectric platform with a large material-selection degree of freedom and unique properties toward close-to-atomic scale manufacture of on-chip photonic and optoelectronic devices.

Multifunctional and Transformative Metaphotonics with Emerging Materials

Future technologies underpinning multifunctional physical and chemical systems and compact biological sensors will rely on densely packed transformative and tunable circuitry employing nanophotonics. For many years, plasmonics was considered as the only available platform for subwavelength optics, but the recently emerged field of resonant metaphotonics may provide a versatile practical platform for nanoscale science by employing resonances in high-index dielectric nanoparticles and metasurfaces. Here, we discuss the recently emerged field of metaphotonics and describe its connection to material science and chemistry. For tunabilty, metaphotonics employs a variety of the recently highlighted materials such as polymers, perovskites, transition metal dichalcogenides, and phase change materials. This allows to achieve diverse functionalities of metasystems and metasurfaces for efficient spatial and temporal control of light by employing multipolar resonances and the physics of bound states in the continuum. We anticipate expanding applications of these concepts in nanolasers, tunable metadevices, metachemistry, as well as a design of a new generation of chemical and biological ultracompact sensing devices.

Engineering Near-Infrared Light Emission in Mechanically Exfoliated InSe Platelets through Hydrostatic Pressure for Multicolor Microlasing

γ-indium selenide (InSe) is a van der Waals semiconductor and holds great potentials for low-energy-consumption electronic and optoelectronic devices. Herein, we investigated the hydrostatic pressure engineered near-infrared (NIR) light emission of mechanically exfoliated γ-InSe crystals using the diamond anvil cell (DAC) technique. A record-wide spectral tuning range of 185 nm and a large linear pressure coefficient of 40 nm GPa^-1 were achieved for spontaneous emissions, leading to ultrabroadband microlasing spectrally ranging from 1022 to 911 nm. This high emission tunability can be attributed to the compression of the soft intralayer In-Se bonds under high pressure, which suppressed the band gap shrinkage by increasing the interlayer interaction. Furthermore, two band gap crossovers of valence (direct-to-indirect) and conduction bands were resolved at approximately 4.0 and 7.0 GPa, respectively, resulting in pressure-sensitive emission lifetime and intensity. These findings pave the pathways for pressure-sensitive InSe-based NIR light sources, sensors and so on.