Water-Induced Self-Assembly and In Situ Mineralization within Plant Phenolic Glycol-Gel toward Ultrastrong and Multifunctional Thermal Insulating Aerogels

Lightweight and Mechanically Robust Cellulosic Triboelectric Materials for Wearable Self-Powered Rehabilitation Training

Lightweight and robust self-powered wearable devices are of great importance in rehabilitation and medical assistance, but this places greater demands on the development of functional materials. In particular, a balance between reducing the weight of materials and enhancing their mechanical performance is urgently needed. Here, this study reports a design strategy based on a cross-scale strengthening mechanism, which endows triboelectric materials with mechanically robust properties, and can withstand more than 16,600 times its weight without any deformation. A biomimetic ordered network structure with "wall-septum" is obtained by using the directional ice templating method, followed by the formation of more hydrogen bonds between polymer molecular chains promoted by salting-out. The resultant triboelectric material exhibits a Young's modulus of 130.3 MPa, and a specific modulus of 409.0 kN m/kg. Triboelectric materials are used to construct highly robust triboelectric nanogenerators that are stable even under an impact of 735.5 kPa. The accurate acquisition of a human motion state signal in the process of rehabilitation training is realized. This study provides a universal strategy for the development of lightweight and robust triboelectric material and provides a solution for the application of self-powered wearable devices in rehabilitation training.

Ultra-strong and solvent-resistant lignin-based non-isocyanate polyurethane adhesives: One-pot strategy toward versatile bonding

Isocyanate-free polyurethane adhesives have attracted considerable attention as a promising environmentally friendly alternative. However, their progress has been hindered by insufficient bonding performance and weak solvent resistance, as well as the laborious synthesis processes involved. Herein, we successfully synthesized a high-performance lignin-based non-isocyanate adhesives (LNIPUs-G) through a one-pot strategy that combines the polycondensation of carbonate groups with polyether amines and aldehyde-amine chemistry. The former aspect circumvents the limitations associated with cyclic carbonate polyaddition while providing a molecular composition containing both rigid and flexible segments along with a high-density polar groups. Concurrently, the rapid hyperbranching process in the latter aspect significantly contributes to achieving a robust crosslinked network. As a result, the LNIPUs-G demonstrates exceptional resistance to boiling water with bond strengths of up to 1.32 MPa when applied to plywood, surpassing previously reported bio-based adhesives. Moreover, the adhesive exhibits remarkable versatility across a wide range of substrates including steel, iron, copper, carbon fiber reinforced composites, ceramics, aluminum, wood, and glass. Additionally, the adhesive has excellent resistance to an extensive range of organic solvents. Life cycle assessment (LCA) results demonstrate that the high-performance and cost-effective LNIPUs-G is expected to disrupt the dominance of bulk formaldehyde- and isocyanate-based adhesives industry.

A one-step and solvent-free strategy for high lignin-containing polyurethane elastomers with excellent mechanical and shape memory performance

Lignin, a renewable and biodegradable polymer, offers a promising alternative to petroleum-based polyols for polyurethane elastomer synthesis. However, its complex structure poses challenges, such as poor dispersibility and reactivity. This study introduces a novel one-step and solvent-free method for synthesizing lignin-containing polyurethane elastomers (SF-LPUes-ONE) with a high lignin substitution rate of at least 30 wt%. By directly incorporating a dispersion of ethanol-extracted lignin and long-chain polyols into the reaction with isocyanates, we successfully prepared SF-LPUes-ONE with remarkable mechanical properties. The tensile strength, elongation at break, and toughness of the resulting sample reached 42.3 MPa, 584.7 %, and 110.0 MJ/m3, respectively. In addition, the phenolic hydroxyl groups in lignin endowed SF-LPUes-ONE with excellent anti-aging resistance, ensuring sustained high performance under demanding conditions. Furthermore, the dynamic hydrogen bonding and chemical cross-linking dual-network endowed SF-LPUes-ONE with exceptional shape memory capabilities, achieving shape fixation and recovery rates exceeding 99 % after 3 cycles. This work demonstrates a green and efficient approach to high-performance lignin-based polyurethane elastomers, showcasing their potential for broad industrial applications.

Mechanically Robust Triboelectric Aerogels Enabled by Dense Bridging of MXene

Aerogels are widely applied for construction, aerospace, military, and energy owing to their lightweight, high specific surface area, and high porosity. The high porosity of aerogels often leads to a lack of mechanical strength, which limits their applications. Here, this study reports a mechanically robust MXene/cellulose nanocrystal composite aerogel enabled by inducing dense bridging through salting-out. First, MXene sheets are bridged with cellulose molecular chains via hydrogen bonds, and further dense bridging is constructed by promoting hydrogen bond formation through salting-out. By enhancing hydrogen bonding, the interlayer spacing of MXene sheets is reduced and their orientation is improved, effectively increasing the energy dissipation capacity of the porous structure. The aerogel exhibits a Young's modulus of 72.4 MPa, a specific modulus of 342.0 kN m/kg. An aerogel is used as a triboelectric material to construct a highly robust triboelectric nanogenerator. This study provides an effective strategy for the preparation of the mechanically robust aerogels.

Strong and Stable Woody Triboelectric Materials Enabled by Biphase Blocking

Driven by the "Internet of Everything" (IoE) vision, the demand for smart materials is growing. Wood, one of the most abundant and renewable resources, has long been a staple in construction and furnishing applications. To further expand its application range, this study developed a high-strength, stable wood-based triboelectric material through a synergistic biphasic mechanism. The in situ growth of flame retardants and the formation of a dense char layer significantly enhanced the fire resistance of the wood-based triboelectric material, reducing the heat release rate (HRR) by 95.4% and total heat release (THR) by 94.2%. The dense laminate structure provided an excellent impact toughness (126 kJ m-2). As a smart sensor, the wood-based triboelectric material demonstrated the ability to recognize human motion states and trajectories, exhibiting great potential for applications in smart homes. This study provides valuable insights for exploring the potential applications of wood as a smart material.

Interpenetrated Multinetwork Hybrid Aerogels by Layered Montmorillonite and One-Dimensional Hydroxyapatite Fibers for Heat and Fire Insulation

It is of practical significance to develop aerogels with effective thermal insulation characteristics together with fireproof properties as well as high mechanical strength. Here, an interpenetrated multinetwork hybrid aerogel realizing thermal insulation, flame retardancy, and high compression modulus is demonstrated. Specifically, one-dimensional hydroxyapatite nanowires (HAP) played dual roles as the aerogel support skeleton to entangle with layered montmorillonite (MMT) each other to form a three-dimensional interpenetrated multinetwork structure and to optimize the thermal conductivity by adjusting the pore space in current HAP/MMT/PVA hybrid aerogels. Therefore, the interpenetrated multinetwork hybrid aerogels exhibit superior thermal insulation performance in room temperature (0.033 W m-1 K-1, 298 K, air conditions) and largely enhanced ultrahigh compression modulus (80 MPa). Moreover, the obtained hybrid aerogels also exhibit excellent flame retardancy and self-extinguishing smoke suppression properties (peak heat release rate and total smoke production as low as 92.44 kW m-2 and 0.1 m2, respectively), which is the outstanding interpenetrated multinetwork hybrid aerogel that has achieved synergistic improvement in heat and fire insulation and mechanical performance. Therefore, the interpenetrated multinetwork hybrid aerogels are promising candidates for efficient heat insulation, fire prevention, and mechanically robust applications.

Integration of N- and P- elements in sodium alginate aerogels for efficient flame retardant and thermal insulating properties

In the field of building energy conservation, the development of biodegradable biomass aerogels with excellent mechanical performance, flame retardancy and thermal insulation properties is of particular importance. Here, a directional freeze-drying method was used for fabricating composite sodium alginate (SA) aerogels containing functionalized ammonium polyphosphate (APP) flame retardant. In particular, APP was coated with melamine (MEL) and phytic acid (PA) by a supramolecular assembly process. Through optimizing the flame retardant addition, the SA-20 AMP sample exhibited excellent flame retardant and thermal insulation properties, with the limiting oxygen index of 38.2 % and the UL-94 rating of V-0. Such aerogels with anisotropic morphology demonstrated a low thermal conductivity of 0.0288 (W/m·K) in the radial direction (perpendicular to the lamellar structure). In addition, as-obtained aerogels displayed remarkable water stability and mechanical properties, indicating significant potential for practical applications.

Superdurable Full-Life Superhydrophobic Composite Block

Superhydrophobic materials are attractive for industrial development but plagued by poor mechanical stability. Herein, a superdurable full-life superhydrophobic composite block is designed and fabricated by embedding near-zero contractive superhydrophobic silica aerogel into a rigid iron-nickel foam structured similarly to a regular dodecahedron. The synergistic protection afforded by these materials ensures superrobust mechanical stability for the composite block, which features a high compressive strength of up to ≈7.4 MPa, and ultralow Taber abrasion of down to ≈0.567 mm after withstanding 50 000 cycles, and highly efficient water harvesting capability of up to ≈3114.3 mg min-1 cm-2 at a supercooling degree of 40 K. This robust material system provides a novel strategy to design superhydrophobic materials capable of withstanding extreme conditions, including high temperature, humidity, pressure, and abrasion.

A Review of High-Temperature Aerogels: Composition, Mechanisms, and Properties

High-temperature aerogels have garnered significant attention as promising insulation materials in various industries such as aerospace, automotive manufacturing, and beyond, owing to their remarkable thermal insulation properties coupled with low density. With advancements in manufacturing techniques, the thermal resilience of aerogels has considerable improvements. Notably, polyimide-based aerogels can endure temperatures up to 1000 °C, zirconia-based aerogels up to 1300 °C, silica-based aerogels up to 1500 °C, alumina-based aerogels up to 1800 °C, and carbon-based aerogels can withstand up to 2500 °C. This paper systematically discusses recent advancements in the thermal insulation performance of these five materials. It elaborates on the temperature resistance of aerogels and elucidates their thermal insulation mechanisms. Furthermore, it examines the impact of doping elements on the thermal conductivity of aerogels and consolidates various preparation methods aimed at producing aerogels capable of withstanding temperatures. In conclusion, by employing judicious composition design strategies, it is anticipated that the maximum tolerance temperature of aerogels can surpass 2500 °C, thus opening up new avenues for their application in extreme thermal environments.

Non-crosslinked systems modulate the gel behavior and structural properties of chitosan/silica composite aerogels

The aim of this study was to achieve rapid gelation of chitosan (CS) and silica (SA) without crosslinking agent, the relationship between process parameters and the composite aerogels properties were also explored. By varying the composition ratio of the system (from SA:CS = 1:1 to 5:1), the system gelation time was reduced by >12 times, and the drying shrinkage of the composite aerogel reached a minimum of 7.6 %. During the two recombination processes, chitosan rapidly formed aqueous colloid secondary structure under the influence of ethanol. This phenomenon reduced the stability of the system and allowed silica to form a two-phase composite hydrogel. Because the network gap between the fibers was used as a limiting medium for gel growth. In addition, the chitosan/silica composite aerogels exhibited a mesoporous structure with low density (0.1144 g/cm3), and the thermal conductivity was 0.028 W/(m·K) at 30 °C. The trimethylchlorosilane made the composite aerogel have good hydrophobicity with water contact angle as 134.7°, and the adsorption capacity of carbon tetrachloride could reach >10 times of its own weight. This study provides an eco-friendly and high-efficiency method for preparing aerogels, which has potential applications in the fields of thermal insulation, oil-water separation, etc.

Multifunctional Bagasse Foam with Improved Thermal Insulation and Flame Retardancy by a Borax-Induced Self-Assembly and Ambient Pressure Drying Technique

Cellulose foams are considered an effective alternative to plastic foam, because of their advantages of low density, high porosity, low thermal conductivity, and renewable nature. However, they still suffer from complex processing, poor mechanical properties, and flammability. As an agricultural waste, bagasse is rich in cellulose, which has attracted much attention. Inspired by the fact that borate ions can effectively enhance the strength of plant tissue by their cross-linking with polysaccharides, the present work designs and fabricates a series of multifunctional bagasse foams with robust strength and improved thermal insulation and flame retardancy via a unique borax-induced self-assembly and atmospheric pressure drying route using bagasse as a raw material, borate as a cross-linking agent, and chitosan as an additive. As a result, the optimized foam exhibits a high porosity (93.5%), a high hydrophobic water contact angle (150.4°), a low thermal conductivity (63.4 mW/(m·K) at 25 °C), and an outstanding flame retardancy. The present study provides a novel and inspiring idea for large-scale production of cellulose foams through an environmentally friendly and cost-effective approach.

Eliminating trade-offs between optical scattering and mechanical durability in aerogels as outdoor passive cooling metamaterials

Passive cooling is a promising approach for reducing the large energy consumption to achieve carbon neutrality. Foams/aerogels can be considered effective daytime cooling materials due to their good solar scattering and thermal insulation capacity. However, the contradiction between the desired high solar reflectivity and mechanical performance still limits their scalable production and real application. Herein, inspired by the "Floor-Pillar" concept in the building industry, a multi-structure assembly-induced ice templating technology was used to construct all-cellulosic aerogels with well-defined biomimetic structures. By using cellulose nanofibers (CNFs) as pillars and cellulose nanocrystals (CNCs) as floors and methyltrimethoxysilane (MTMS) as a crosslinking material, an all-cellulosic aerogel (NCA) exhibiting high mechanical strength (mechanical strength = 0.3 MPa at 80% compression ratio, Young's modulus = 1 MPa), ultralow thermal conductivity (28 mW m-1 K-1), ultrahigh solar reflectance (97.5%), high infrared emissivity (0.93), as well as excellent anti-weather function can be achieved, exceeding the performance of most reported cellulosic aerogels. Furthermore, the mechanisms of the improved mechanical strength and stimulated superior solar reflectance of NCA were studied in detail using finite element simulations and COMSOL Multiphysics. As a result, the NCA can achieve a cooling efficiency of 7.5 °C during the daytime. The building energy stimulus demonstrated that 44% of cooling energy can be saved in China annually if the NCA is applied. This work lays the foundation for the preparation of biomass aerogels for energy-saving applications.

Multifunctional cellulose-based aerogel for intelligent fire fighting

Multifunctional biomass-based aerogels with mechanically robust and high fire safety are urgently needed for the development of environmentally-friendly intelligent fire fighting but challenging. Herein, a novel polymethylsilsesquioxane (PMSQ)/cellulose/MXene composite aerogel (PCM) with superior comprehensive performance was fabricated by ice-induced assembly and in-situ mineralization. It exhibited light weight (16.2 mg·cm-3), excellent mechanical resilience, and rapidly recovered after being subjected to the pressure of 9000 times of its own weight. Moreover, PCM demonstrated outstanding thermal insulation, hydrophobicity and sensitive piezoresistive sensing. In addition, benefiting from the synergism of PMSQ and MXene, PCM displayed good flame retardancy and improved thermostability. The limiting oxygen index of PCM was higher than 45.0 %, and it quickly self-extinguished after being removed away from fire. More importantly, the rapid electrical resistance reduction of MXene at high temperature endowed PCM with sensitive fire-warning capability (trigger time was less than 1.8 s), which provided valuable time for people to evacuate and relief. This work provides new insights for the preparation and application of the next-generation high performance biomass-based aerogels.

Hydrophobic aerogel-modified hemostatic gauze with thermal management performance

Current hemostatic agents or dressings are not efficient under extremely hot and cold environments due to deterioration of active ingredients, water evaporation and ice crystal growth. To address these challenges, we engineered a biocompatible hemostatic system with thermoregulatory properties for harsh conditions by combining the asymmetric wetting nano-silica aerogel coated-gauze (AWNSA@G) with a layer-by-layer (LBL) structure. Our AWNSA@G was a dressing with a tunable wettability prepared by spraying the hydrophobic nano-silica aerogel onto the gauze from different distances. The hemostatic time and blood loss of the AWNSA@G were 5.1 and 6.9 times lower than normal gauze in rat's injured femoral artery model. Moreover, the modified gauze was torn off after hemostasis without rebleeding, approximately 23.8 times of peak peeling force lower than normal gauze. For the LBL structure, consisting of the nano-silica aerogel layer and a n-octadecane phase change material layer, in both hot (70 °C) and cold (-27 °C) environments, exhibited dual-functional thermal management and maintained a stable internal temperature. We further verified our composite presented superior blood coagulation effect in extreme environments due to the LBL structure, the pro-coagulant properties of nano-silica aerogel and unidirectional fluid pumping of AWNSA@G. Our work, therefore, shows great hemostasis potential under normal and extreme temperature environments.

The Synthesis and Polymer-Reinforced Mechanical Properties of SiO2 Aerogels: A Review

Silica aerogels are considered as the distinguished materials of the future due to their extremely low thermal conductivity, low density, and high surface area. They are widely used in construction engineering, aeronautical domains, environmental protection, heat storage, etc. However, their fragile mechanical properties are the bottleneck restricting the engineering application of silica aerogels. This review briefly introduces the synthesis of silica aerogels, including the processes of sol-gel chemistry, aging, and drying. The effects of different silicon sources on the mechanical properties of silica aerogels are summarized. Moreover, the reaction mechanism of the three stages is also described. Then, five types of polymers that are commonly used to enhance the mechanical properties of silica aerogels are listed, and the current research progress is introduced. Finally, the outlook and prospects of the silica aerogels are proposed, and this paper further summarizes the methods of different polymers to enhance silica aerogels.

Multifunctional Flame-Retardant, Thermal Insulation, and Antimicrobial Wood-Based Composites

Wood has been used in a variety of applications in our daily lives and military industry. Nevertheless, its flammability causes potential fire risks and hazards. Improving the flame retardancy of wood is a challenging task. Herein, a phytic acid-based flame retardant (referred to as AMPA) was synthesized based on supramolecular reactions between melamine and p-amino-benzene sulfonic acid followed by a reaction with phytic acid using deionized water as the solvent. A composite wood was prepared by removing lignin to tailor the unique mesoporous structure of the material, followed by coating AMPA on the surfaces of wood microchannels. The limiting oxygen index of wood has been improved to 52.5% with the addition of 5.6 wt % AMPA. The peak heat release rate for the prepared composite wood was reduced by 81% compared to that for delignified wood, which demonstrates the excellent flame-retardant performance of the prepared composite wood. Furthermore, AMPA and mesoporous structures endow antimicrobial and thermal insulation functions. Hence, this work provides a feasible method for preparing flame-retardant wood-based materials for diversified applications.

Research on the Change in Chemical Composition and Fungal Resistance of Moso Bamboo with Heat Treatment

Bamboo, as a potential alternative to biomass materials, has gained more attention from the bamboo manufacturing industry in China. However, the drawbacks, such as the dimensional instability, and low antifungal and hydrophilic properties of bamboo, inhibit its application and shorten its service life. The objective of this work was to analyze the change in chemical components and fungal resistance of moso bamboo with heat treatment. For this objective, moso bamboo specimens were thermally modified in an oven at different temperatures for a fixed duration. The results showed that the parenchymal cells distorted and deformed in comparison to the control after thermal modification. After thermal modification in an oven, the crystallinity index increased from 39% to 53%. Owing to the thermal modification, the hemicellulose and cellulose relative content decreased, as confirmed by FTIR and XPS analysis. Thus, the dimensional stability and antifungal properties of the thermally modified bamboo specimens improved.