1
|
Wu J, Zhu C, Morikawa H, Zhang X, Yin X, Yu J, Zhang S, Ding B. A Breathable Fibrous Membrane with Coaxially Heterogeneous Conductive Networks toward Personal Thermal Management and Electromagnetic Interference Shielding. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2311827. [PMID: 38381114 DOI: 10.1002/smll.202311827] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/18/2023] [Revised: 01/30/2024] [Indexed: 02/22/2024]
Abstract
The expeditious growth of wearable electronic devices has boomed the development of versatile smart textiles for personal health-related applications. In practice, integrated high-performance systems still face challenges of compromised breathability, high cost, and complicated manufacturing processes. Herein, a breathable fibrous membrane with dual-driven heating and electromagnetic interference (EMI) shielding performance is developed through a facile process of electrospinning followed by targeted conformal deposition. The approach constructs a robust hierarchically coaxial heterostructure consisting of elastic polymers as supportive "core" and dual-conductive components of polypyrrole and copper sulfide (CuS) nanosheets as continuous "sheath" at the fiber level. The CuS nanosheets with metal-like electrical conductivity demonstrate the promising potential to substitute the expensive conductive nano-materials with a complex fabricating process. The as-prepared fibrous membrane exhibits high electrical conductivity (70.38 S cm-1), exceptional active heating effects, including solar heating (saturation temperature of 69.7 °C at 1 sun) and Joule heating (75.2 °C at 2.9 V), and impressive EMI shielding performance (50.11 dB in the X-band), coupled with favorable air permeability (161.4 mm s-1 at 200 Pa) and efficient water vapor transmittance (118.9 g m-2 h). This work opens up a new avenue to fabricate versatile wearable devices for personal thermal management and health protection.
Collapse
Affiliation(s)
- Jiajia Wu
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai, 201620, China
- Faculty of Textile Science and Technology, Institute for Fiber Engineering, Shinshu University, 3-15-1, Tokida, Ueda, Nagano, 386-8567, Japan
| | - Chunhong Zhu
- Faculty of Textile Science and Technology, Institute for Fiber Engineering, Shinshu University, 3-15-1, Tokida, Ueda, Nagano, 386-8567, Japan
| | - Hideaki Morikawa
- Faculty of Textile Science and Technology, Institute for Fiber Engineering, Shinshu University, 3-15-1, Tokida, Ueda, Nagano, 386-8567, Japan
| | - Xinxin Zhang
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai, 201620, China
| | - Xia Yin
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai, 201620, China
| | - Jianyong Yu
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai, 201620, China
| | - Shichao Zhang
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai, 201620, China
| | - Bin Ding
- Innovation Center for Textile Science and Technology, Donghua University, Shanghai, 201620, China
| |
Collapse
|
2
|
Ferreira R, Silva AP, Nunes-Pereira J. Current On-Skin Flexible Sensors, Materials, Manufacturing Approaches, and Study Trends for Health Monitoring: A Review. ACS Sens 2024; 9:1104-1133. [PMID: 38394033 PMCID: PMC10964246 DOI: 10.1021/acssensors.3c02555] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2023] [Revised: 01/17/2024] [Accepted: 02/07/2024] [Indexed: 02/25/2024]
Abstract
Due to an ever-increasing amount of the population focusing more on their personal health, thanks to rising living standards, there is a pressing need to improve personal healthcare devices. These devices presently require laborious, time-consuming, and convoluted procedures that heavily rely on cumbersome equipment, causing discomfort and pain for the patients during invasive methods such as sample-gathering, blood sampling, and other traditional benchtop techniques. The solution lies in the development of new flexible sensors with temperature, humidity, strain, pressure, and sweat detection and monitoring capabilities, mimicking some of the sensory capabilities of the skin. In this review, a comprehensive presentation of the themes regarding flexible sensors, chosen materials, manufacturing processes, and trends was made. It was concluded that carbon-based composite materials, along with graphene and its derivates, have garnered significant interest due to their electromechanical stability, extraordinary electrical conductivity, high specific surface area, variety, and relatively low cost.
Collapse
Affiliation(s)
- Rodrigo
G. Ferreira
- C-MAST, Centre for Mechanical and Aerospace
Science and Technologies, Universidade da
Beira Interior, Rua Marquês d’Ávila e Bolama, 6201-001 Covilhã, Portugal
| | - Abílio P. Silva
- C-MAST, Centre for Mechanical and Aerospace
Science and Technologies, Universidade da
Beira Interior, Rua Marquês d’Ávila e Bolama, 6201-001 Covilhã, Portugal
| | - João Nunes-Pereira
- C-MAST, Centre for Mechanical and Aerospace
Science and Technologies, Universidade da
Beira Interior, Rua Marquês d’Ávila e Bolama, 6201-001 Covilhã, Portugal
| |
Collapse
|
3
|
Wang X, Xiao X, Feng Z, Wu Y, Yang J, Chen J. A Soft Bioelectronic Patch for Simultaneous Respiratory and Cardiovascular Monitoring. Adv Healthc Mater 2024; 13:e2303479. [PMID: 38010831 DOI: 10.1002/adhm.202303479] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/11/2023] [Revised: 11/20/2023] [Indexed: 11/29/2023]
Abstract
Sleep is critical to maintaining physical and mental health. Measuring physiological parameters to quantify sleep quality without uncomfortable user experience remains highly desired but a challenge. Here, this work develops a soft bioelectronic patch to perform simultaneous respiration and cardiovascular monitoring during sleep in a wearable and non-invasive manner. The soft bioelectronic patch system is mainly composed of a pressure sensor, a flexible printed circuit for signal processing, and a soft thermoplastic urethane mold for assembling different functional modules. The soft bioelectronic patch holds a sensitivity of >0.12 V kPa-1 and a remarkable low-frequency response from 0.5 to 15 Hz. It is demonstrated to continuously monitor respiration and heartbeat during the whole night, which could be harnessed for sleep monitoring and obstructive sleep apnea-hypopnea syndrome diagnosis. The reported soft bioelectronic patch represents a simple and convenient platform technology for sleep study.
Collapse
Affiliation(s)
- Xue Wang
- College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing, 401331, China
- Department of Bioengineering, University of California, Los Angeles, CA 90095, USA
| | - Xiao Xiao
- Department of Bioengineering, University of California, Los Angeles, CA 90095, USA
| | - Zhiping Feng
- Department of Optoelectronic Engineering, Key Laboratory of Optoelectronic Technology and Systems, Ministry of Education, Chongqing University, Chongqing, 400044, P. R. China
| | - Yufen Wu
- College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing, 401331, China
| | - Jin Yang
- Department of Optoelectronic Engineering, Key Laboratory of Optoelectronic Technology and Systems, Ministry of Education, Chongqing University, Chongqing, 400044, P. R. China
| | - Jun Chen
- Department of Bioengineering, University of California, Los Angeles, CA 90095, USA
| |
Collapse
|
4
|
Ding Y, Jiang J, Wu Y, Zhang Y, Zhou J, Zhang Y, Huang Q, Zheng Z. Porous Conductive Textiles for Wearable Electronics. Chem Rev 2024; 124:1535-1648. [PMID: 38373392 DOI: 10.1021/acs.chemrev.3c00507] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/21/2024]
Abstract
Over the years, researchers have made significant strides in the development of novel flexible/stretchable and conductive materials, enabling the creation of cutting-edge electronic devices for wearable applications. Among these, porous conductive textiles (PCTs) have emerged as an ideal material platform for wearable electronics, owing to their light weight, flexibility, permeability, and wearing comfort. This Review aims to present a comprehensive overview of the progress and state of the art of utilizing PCTs for the design and fabrication of a wide variety of wearable electronic devices and their integrated wearable systems. To begin with, we elucidate how PCTs revolutionize the form factors of wearable electronics. We then discuss the preparation strategies of PCTs, in terms of the raw materials, fabrication processes, and key properties. Afterward, we provide detailed illustrations of how PCTs are used as basic building blocks to design and fabricate a wide variety of intrinsically flexible or stretchable devices, including sensors, actuators, therapeutic devices, energy-harvesting and storage devices, and displays. We further describe the techniques and strategies for wearable electronic systems either by hybridizing conventional off-the-shelf rigid electronic components with PCTs or by integrating multiple fibrous devices made of PCTs. Subsequently, we highlight some important wearable application scenarios in healthcare, sports and training, converging technologies, and professional specialists. At the end of the Review, we discuss the challenges and perspectives on future research directions and give overall conclusions. As the demand for more personalized and interconnected devices continues to grow, PCT-based wearables hold immense potential to redefine the landscape of wearable technology and reshape the way we live, work, and play.
Collapse
Affiliation(s)
- Yichun Ding
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350108, P. R. China
- Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China, Fuzhou, Fujian 350108, P. R. China
| | - Jinxing Jiang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Yingsi Wu
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Yaokang Zhang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Junhua Zhou
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Yufei Zhang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Qiyao Huang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Research Institute for Intelligent Wearable Systems, The Hong Kong Polytechnic University, Hong Kong SAR 999077, P. R. China
| | - Zijian Zheng
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Department of Applied Biology and Chemical Technology, Faculty of Science, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Research Institute for Intelligent Wearable Systems, The Hong Kong Polytechnic University, Hong Kong SAR 999077, P. R. China
- Research Institute for Smart Energy, The Hong Kong Polytechnic University, Hong Kong SAR 999077, P. R. China
| |
Collapse
|
5
|
Zhou Y, Wang S, Yin J, Wang J, Manshaii F, Xiao X, Zhang T, Bao H, Jiang S, Chen J. Flexible Metasurfaces for Multifunctional Interfaces. ACS NANO 2024; 18:2685-2707. [PMID: 38241491 DOI: 10.1021/acsnano.3c09310] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/21/2024]
Abstract
Optical metasurfaces, capable of manipulating the properties of light with a thickness at the subwavelength scale, have been the subject of extensive investigation in recent decades. This research has been mainly driven by their potential to overcome the limitations of traditional, bulky optical devices. However, most existing optical metasurfaces are confined to planar and rigid designs, functions, and technologies, which greatly impede their evolution toward practical applications that often involve complex surfaces. The disconnect between two-dimensional (2D) planar structures and three-dimensional (3D) curved surfaces is becoming increasingly pronounced. In the past two decades, the emergence of flexible electronics has ushered in an emerging era for metasurfaces. This review delves into this cutting-edge field, with a focus on both flexible and conformal design and fabrication techniques. Initially, we reflect on the milestones and trajectories in modern research of optical metasurfaces, complemented by a brief overview of their theoretical underpinnings and primary classifications. We then showcase four advanced applications of optical metasurfaces, emphasizing their promising prospects and relevance in areas such as imaging, biosensing, cloaking, and multifunctionality. Subsequently, we explore three key trends in optical metasurfaces, including mechanically reconfigurable metasurfaces, digitally controlled metasurfaces, and conformal metasurfaces. Finally, we summarize our insights on the ongoing challenges and opportunities in this field.
Collapse
Affiliation(s)
- Yunlei Zhou
- Hangzhou Institute of Technology, Xidian University, Hangzhou 311200, China
- School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China
| | - Shaolei Wang
- Department of Bioengineering, University of California, Los Angeles, Los Angeles, California 90095, United States
| | - Junyi Yin
- Department of Bioengineering, University of California, Los Angeles, Los Angeles, California 90095, United States
| | - Jianjun Wang
- Hangzhou Institute of Technology, Xidian University, Hangzhou 311200, China
- School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China
| | - Farid Manshaii
- Department of Bioengineering, University of California, Los Angeles, Los Angeles, California 90095, United States
| | - Xiao Xiao
- Department of Bioengineering, University of California, Los Angeles, Los Angeles, California 90095, United States
| | - Tianqi Zhang
- Hangzhou Institute of Technology, Xidian University, Hangzhou 311200, China
- School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China
| | - Hong Bao
- Hangzhou Institute of Technology, Xidian University, Hangzhou 311200, China
- School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China
| | - Shan Jiang
- Hangzhou Institute of Technology, Xidian University, Hangzhou 311200, China
- School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China
| | - Jun Chen
- Department of Bioengineering, University of California, Los Angeles, Los Angeles, California 90095, United States
| |
Collapse
|
6
|
Sun Y, Wang J, Lu Q, Fang T, Wang S, Yang C, Lin Y, Wang Q, Lu YQ, Kong D. Stretchable and Smart Wettable Sensing Patch with Guided Liquid Flow for Multiplexed in Situ Perspiration Analysis. ACS NANO 2024; 18:2335-2345. [PMID: 38189251 DOI: 10.1021/acsnano.3c10324] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/09/2024]
Abstract
Stretchable sweat sensors have become a personalized wearable platform for continuous, noninvasive health monitoring through conformal integration with the human body. Typically, these devices are coupled with soft microfluidic systems to control sweat flow during advanced analysis processes. However, the implementation of these soft microfluidic devices is limited by their high fabrication costs and the need for skin adhesives to block natural perspiration. To overcome these limitations, a stretchable and smart wettable patch has been proposed for multiplexed in situ perspiration analysis. The patch includes a porous membrane in the form of a patterned microfoam and a nanofiber layer laminate, which extracts sweat selectively from the skin and directs its continuous flow across the device. The integrated electrochemical sensor array measures multiple biomarkers simultaneously such as pH, K+, and Na+. The soft sensing patch comprises compliant materials and structures that allow deformability of up to 50% strain, which enables a stable and seamless interface with the curvilinear human body. During continuous physical exercise, the device has demonstrated a special operating mode by actively accumulating sweat from the skin for multiplex electrochemical analysis of biomarker profiles. The smart wettable membrane provides an affordable solution to address the sampling challenges of in situ perspiration analysis.
Collapse
Affiliation(s)
- Yuping Sun
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Jianhui Wang
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Qianying Lu
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Ting Fang
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Shaolei Wang
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Cheng Yang
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Yong Lin
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Qian Wang
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| | - Yan-Qing Lu
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- Key Laboratory of Intelligent Optical Sensing and Manipulation, Nanjing University, Nanjing 210093, China
| | - Desheng Kong
- College of Engineering and Applied Sciences, National Laboratory of Solid State Microstructure, and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
- State Key Laboratory of Analytical Chemistry for Life Science, and Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210023, China
| |
Collapse
|
7
|
Zhang C, Ouyang W, Zhang L, Li D. A dual-mode fiber-shaped flexible capacitive strain sensor fabricated by direct ink writing technology for wearable and implantable health monitoring applications. MICROSYSTEMS & NANOENGINEERING 2023; 9:158. [PMID: 38144391 PMCID: PMC10739884 DOI: 10.1038/s41378-023-00634-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/12/2023] [Revised: 10/31/2023] [Accepted: 11/08/2023] [Indexed: 12/26/2023]
Abstract
Flexible fiber-shaped strain sensors show tremendous potential in wearable health monitoring and human‒machine interactions due to their compatibility with everyday clothing. However, the conductive and sensitive materials generated by traditional manufacturing methods to fabricate fiber-shaped strain sensors, including sequential coating and solution extrusion, exhibit limited stretchability, resulting in a limited stretch range and potential interface delamination. To address this issue, we fabricate a fiber-shaped flexible capacitive strain sensor (FSFCSS) by direct ink writing technology. Through this technology, we print parallel helical Ag electrodes on the surface of TPU tube fibers and encapsulate them with a high dielectric material BTO@Ecoflex, endowing FSFCSS with excellent dual-mode sensing performance. The FSFCSS can sense dual-model strain, namely, axial tensile strain and radial expansion strain. For axial tensile strain sensing, FSFCSS exhibits a wide detection range of 178%, a significant sensitivity of 0.924, a low detection limit of 0.6%, a low hysteresis coefficient of 1.44%, and outstanding mechanical stability. For radial expansion strain sensing, FSFCSS demonstrates a sensitivity of 0.00086 mmHg-1 and exhibits excellent responsiveness to static and dynamic expansion strain. Furthermore, FSFCSS was combined with a portable data acquisition circuit board for the acquisition of physiological signals and human‒machine interaction in a wearable wireless sensing system. To measure blood pressure and heart rate, FSFCSS was combined with a printed RF coil in series to fabricate a wireless hemodynamic sensor. This work enables simultaneous application in wearable and implantable health monitoring, thereby advancing the development of smart textiles.
Collapse
Affiliation(s)
- Chi Zhang
- State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, 300072 Tianjin, China
| | - Wenyu Ouyang
- State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, 300072 Tianjin, China
| | - Lei Zhang
- State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, 300072 Tianjin, China
| | - Dachao Li
- State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, 300072 Tianjin, China
| |
Collapse
|
8
|
Xie F, Wang T, Li Y, Pan Y, Guo P, Liu C, Shen C, Liu X. Ag Nanoparticles-Coated Shish-Kebab Superstructure Film for Wearable Heater. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 38040021 DOI: 10.1021/acsami.3c14848] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/03/2023]
Abstract
Passive and active wearable heaters have received widespread attention due to their efficient utilization of solar energy and all-weather heating capabilities, but the current challenges are their preparation processes being time-consuming and equipment expensive. Herein, a simple and facilitated preparation method for the multifunctional wearable heater was developed, which springs Ag nanoparticles on the shish-kebab superstructure film via deposited melanin-like polydopamine as the adhesive. The light absorption ability of the resultant wearable heater in the visible region can be significantly enhanced by the addition of polydopamine, realizing a highly efficient photothermal conversion ability. Accordingly, it can achieve rapid warming ability whether passive heating (up to 45 °C about 60 s at 100 mW/cm2) or active heating (up to 72 °C about 40 s at 0.6 V), compared to ordinary cotton fabric. In addition, it can realize a 6.3 °C temperature difference with Cotton, showing excellent heat preservation ability. This study demonstrates a simple and low-cost approach for the prepared shish-kebab superstructure-based wearable heaters.
Collapse
Affiliation(s)
- Fengsen Xie
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Tengrui Wang
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Yingnuo Li
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Yamin Pan
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Pan Guo
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Chuntai Liu
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Changyu Shen
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| | - Xianhu Liu
- National Engineering Research Center for Advanced Polymer Processing Technology, Key Laboratory of Advanced Material Processing & Mold (Ministry of Education), Zhengzhou University, Zhengzhou 450002, China
| |
Collapse
|
9
|
Qu X, Xie R, Zhou Z, Zhang T, Guan M, Chen S, Wang H. Highly Sensitive Capacitive Fiber Pressure Sensors Enabled by Electrode and Dielectric Layer Regulation. ACS APPLIED MATERIALS & INTERFACES 2023; 15:54966-54976. [PMID: 37967359 DOI: 10.1021/acsami.3c13714] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2023]
Abstract
Capacitive pressure sensors play an important role in the field of flexible electronics. Despite significant advances in two-dimensional (2D) soft pressure sensors, one-dimensional (1D) fiber electronics are still struggling. Due to differences in structure, the theoretical research of 2D sensors has difficulty guiding the design of 1D sensors. The multiple response factors of 1D sensors and the capacitive response mechanism have not been explored. Fiber sensors urgently need a tailor-made theoretical research and development path. In this regard, we established a fiber pressure-sensing platform using a coaxial wet spinning process. Aiming at the two problems of the soft electrode modulus and dielectric layer thickness, the conclusions are drawn from three aspects: model analysis, experimental verification, and formula derivation. It makes up some theoretical blanks of capacitive fiber pressure sensors. Through the self-regulation of these two factors without a complex structural design, the sensitivity can be significantly improved. This provides a great reference for the design and development of fiber pressure sensors. Besides, taking advantage of the scalability and easy integration of 1D electronics, multipoint sensors prepared by fibers have verified their application potential in health monitoring, human-machine interface, and motion behavior analysis.
Collapse
Affiliation(s)
- Xiangyang Qu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Ruimin Xie
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Zhou Zhou
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Tao Zhang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Mengyao Guan
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Shiyan Chen
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Huaping Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| |
Collapse
|
10
|
Zhang H, Zhai Q, Guan X, Zhen Q, Qian X. Tri-Layered Bicomponent Microfilament Composite Fabric for Highly Efficient Cold Protection. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2303820. [PMID: 37381641 DOI: 10.1002/smll.202303820] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2023] [Revised: 06/12/2023] [Indexed: 06/30/2023]
Abstract
Functional thin fabric with highly efficient cold protection properties are attracting the great attention of long-term dressing in a cold environment. Herein, a tri-layered bicomponent microfilament composite fabric comprised of a hydrophobic layer of PET/PA@C6 F13 bicomponent microfilament webs, an adhesive layer of LPET/PET fibrous web, and a fluffy-soft layer of PET/Cellulous fibrous web is designed and also successfully been fabricated through a facile process of dipping, combined with thermal belt bonding. The prepared samples exhibit a large resistance to wetting of alcohol, a high hydrostatic pressure of 5530 Pa, and brilliant water slipping properties, owing to the presence of dense micropores ranging from 25.1 to 70.3 µm, as well as to the smooth surface with an arithmetic mean deviation of surface roughness (Sa) ranging from 5.112 to 4.369 µm. Besides, the prepared samples exhibited good water vapor permeability, and a tunable CLO value ranging from 0.569 to 0.920, in addition to the fact that it exhibited a very suitable working temperature range of -5 °C to 15 °C. Additionally, it also showed excellent clothing tailorability including high mechanical strength with a remarkably soft texture and lightweight foldability that suitable for cold outdoor clothing applications.
Collapse
Affiliation(s)
- Heng Zhang
- School of Textile, School of Clothing, Zhongyuan University of Technology, No. 1 Huaihe Road, Xinzheng County, Zhengzhou, Henan Province, 451191, China
| | - Qian Zhai
- School of Textile, School of Clothing, Zhongyuan University of Technology, No. 1 Huaihe Road, Xinzheng County, Zhengzhou, Henan Province, 451191, China
| | - Xiaoyu Guan
- School of Materials Designing and Engineering, Beijing Institute of Fashion Technology, Beijing, 100029, China
| | - Qi Zhen
- School of Textile, School of Clothing, Zhongyuan University of Technology, No. 1 Huaihe Road, Xinzheng County, Zhengzhou, Henan Province, 451191, China
| | - Xiaoming Qian
- School of Textile Science and Engineering, Tiangong University, No. 399 Binshui Xilu Road, Xiqing District, Tianjin, 300387, China
| |
Collapse
|
11
|
Yi L, Hou B, Liu X. Optical Integration in Wearable, Implantable and Swallowable Healthcare Devices. ACS NANO 2023; 17:19491-19501. [PMID: 37807286 DOI: 10.1021/acsnano.3c04284] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/10/2023]
Abstract
Recent advances in materials and semiconductor technologies have led to extensive research on optical integration in wearable, implantable, and swallowable health devices. These optical systems utilize the properties of light─intensity, wavelength, polarization, and phase─to monitor and potentially intervene in various biological events. The potential of these devices is greatly enhanced through the use of multifunctional optical materials, adaptable integration processes, advanced optical sensing principles, and optimized artificial intelligence algorithms. This synergy creates many possibilities for clinical applications. This Perspective discusses key opportunities, challenges, and future directions, particularly with respect to sensing modalities, multifunctionality, and the integration of miniaturized optoelectronic devices. We present fundamental insights and illustrative examples of such devices in wearable, implantable, and swallowable forms. The constant pursuit of innovation and the dedicated approach to critical challenges are poised to influence diverse fields.
Collapse
Affiliation(s)
- Luying Yi
- Department of Chemistry, National University of Singapore, 117543, Singapore
| | - Bo Hou
- Department of Chemistry, National University of Singapore, 117543, Singapore
| | - Xiaogang Liu
- Department of Chemistry, National University of Singapore, 117543, Singapore
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou 350207, China
- Center for Functional Materials, National University of Singapore Suzhou Research Institute, Suzhou 215123, China
| |
Collapse
|
12
|
Yang D, Nam HK, Le TSD, Yeo J, Lee Y, Kim YR, Kim SW, Choi HJ, Shim HC, Ryu S, Kwon S, Kim YJ. Multimodal E-Textile Enabled by One-Step Maskless Patterning of Femtosecond-Laser-Induced Graphene on Nonwoven, Knit, and Woven Textiles. ACS NANO 2023; 17:18893-18904. [PMID: 37643475 DOI: 10.1021/acsnano.3c04120] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/31/2023]
Abstract
Personal wearable devices are considered important in advanced healthcare, military, and sports applications. Among them, e-textiles are the best candidates because of their intrinsic conformability without any additional device installation. However, e-textile manufacturing to date has a high process complexity and low design flexibility. Here, we report the direct laser writing of e-textiles by converting raw Kevlar textiles to electrically conductive laser-induced graphene (LIG) via femtosecond laser pulses in ambient air. The resulting LIG has high electrical conductivity and chemical reliability with a low sheet resistance of 2.86 Ω/□. Wearable multimodal e-textile sensors and supercapacitors are realized on different types of Kevlar textiles, including nonwoven, knit, and woven structures, by considering their structural textile characteristics. The nonwoven textile exhibits high mechanical stability, making it suitable for applications in temperature sensors and micro-supercapacitors. On the other hand, the knit textile possesses inherent spring-like stretchability, enabling its use in the fabrication of strain sensors for human motion detection. Additionally, the woven textile offers special sensitive pressure-sensing networks between the warp and weft parts, making it suitable for the fabrication of bending sensors used in detecting human voices. This direct laser synthesis of arbitrarily patterned LIGs from various textile structures could result in the facile realization of wearable electronic sensors and energy storage.
Collapse
Affiliation(s)
- Dongwook Yang
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Han Ku Nam
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Truong-Son Dinh Le
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Jinwook Yeo
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Younggeun Lee
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Young-Ryeul Kim
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Seung-Woo Kim
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Hak-Jong Choi
- Nano-Convergence Manufacturing Systems Research Division, Korea Institute of Machinery & Materials, 156, Gajeongbuk-Ro, Yuseong-Gu, Daejeon 34103, South Korea
| | - Hyung Cheoul Shim
- Nano-Convergence Manufacturing Systems Research Division, Korea Institute of Machinery & Materials, 156, Gajeongbuk-Ro, Yuseong-Gu, Daejeon 34103, South Korea
| | - Seunghwa Ryu
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| | - Soongeun Kwon
- Nano-Convergence Manufacturing Systems Research Division, Korea Institute of Machinery & Materials, 156, Gajeongbuk-Ro, Yuseong-Gu, Daejeon 34103, South Korea
| | - Young-Jin Kim
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Science Town, Daejeon 34141, South Korea
| |
Collapse
|
13
|
Islam MR, Afroj S, Karim N. Scalable Production of 2D Material Heterostructure Textiles for High-Performance Wearable Supercapacitors. ACS NANO 2023; 17:18481-18493. [PMID: 37695696 PMCID: PMC10540263 DOI: 10.1021/acsnano.3c06181] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2023] [Accepted: 09/07/2023] [Indexed: 09/13/2023]
Abstract
Wearable electronic textiles (e-textiles) have emerged as a promising platform for seamless integration of electronic devices into everyday life, enabling nonintrusive monitoring of human health. However, the development of efficient, flexible, and scalable energy storage solutions remains a significant challenge for powering such devices. Here, we address this challenge by leveraging the distinct properties of two-dimensional (2D) material based heterostructures to enhance the performance of wearable textile supercapacitors. We report a highly scalable and controllable synthesis method for graphene and molybdenum disulfide (MoS2) through a microfluidization technique. Subsequently, we employ an ultrafast and industry-scale hierarchical deposition approach using a pad-dry method to fabricate 2D heterostructure based textiles with various configurations suitable for wearable e-textiles applications. Comparative analyses reveal the superior performance of wearable textile supercapacitors based on 2D material heterostructures, demonstrating excellent areal capacitance (∼105.08 mF cm-2), high power density (∼1604.274 μW cm-2) and energy density (∼58.377 μWh cm-2), and outstanding capacitive retention (∼100% after 1000 cycles). Our findings highlight the pivotal role of 2D material based heterostructures in addressing the challenges of performance and scalability in wearable energy storage devices, facilitating large-scale production of high-performance wearable supercapacitors.
Collapse
Affiliation(s)
- Md Rashedul Islam
- Centre
for Print Research (CFPR), University of
the West of England (UWE), Frenchay Campus, Bristol BS16 1QY, U.K.
| | - Shaila Afroj
- Centre
for Print Research (CFPR), University of
the West of England (UWE), Frenchay Campus, Bristol BS16 1QY, U.K.
- National
Graphene Institute (NGI), University of
Manchester, Oxford Road, Manchester M13 9PL, U.K.
| | - Nazmul Karim
- Centre
for Print Research (CFPR), University of
the West of England (UWE), Frenchay Campus, Bristol BS16 1QY, U.K.
- National
Graphene Institute (NGI), University of
Manchester, Oxford Road, Manchester M13 9PL, U.K.
- Advanced
Textiles Research Group, Nottingham Trent
University, Shakespeare Street, Nottingham NG1 4GG, U.K.
| |
Collapse
|
14
|
Zhang Z, Zhu Z, Zhou P, Zou Y, Yang J, Haick H, Wang Y. Soft Bioelectronics for Therapeutics. ACS NANO 2023; 17:17634-17667. [PMID: 37677154 DOI: 10.1021/acsnano.3c02513] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/09/2023]
Abstract
Soft bioelectronics play an increasingly crucial role in high-precision therapeutics due to their softness, biocompatibility, clinical accuracy, long-term stability, and patient-friendliness. In this review, we provide a comprehensive overview of the latest representative therapeutic applications of advanced soft bioelectronics, ranging from wearable therapeutics for skin wounds, diabetes, ophthalmic diseases, muscle disorders, and other diseases to implantable therapeutics against complex diseases, such as cardiac arrhythmias, cancer, neurological diseases, and others. We also highlight key challenges and opportunities for future clinical translation and commercialization of soft therapeutic bioelectronics toward personalized medicine.
Collapse
Affiliation(s)
- Zongman Zhang
- Department of Chemical Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
- The Wolfson Department of Chemical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
| | - Zhongtai Zhu
- Department of Chemical Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
| | - Pengcheng Zhou
- Department of Chemical Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
- The Wolfson Department of Chemical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
| | - Yunfan Zou
- Department of Biotechnology and Food Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
- Department of Biomedical Engineering, Johns Hopkins University, Baltimore, Maryland 21218, United States
| | - Jiawei Yang
- Department of Chemical Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
- The Wolfson Department of Chemical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
| | - Hossam Haick
- The Wolfson Department of Chemical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
| | - Yan Wang
- Department of Chemical Engineering, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
- The Wolfson Department of Chemical Engineering, Technion-Israel Institute of Technology, Haifa 3200003, Israel
- Guangdong Provincial Key Laboratory of Materials and Technologies for Energy Conversion, Guangdong Technion-Israel Institute of Technology, 241 Daxue Road, Shantou, Guangdong 515063, China
| |
Collapse
|
15
|
Wu SD, Hsu SH, Ketelsen B, Bittinger SC, Schlicke H, Weller H, Vossmeyer T. Fabrication of Eco-Friendly Wearable Strain Sensor Arrays via Facile Contact Printing for Healthcare Applications. SMALL METHODS 2023; 7:e2300170. [PMID: 37154264 DOI: 10.1002/smtd.202300170] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/13/2023] [Revised: 03/28/2023] [Indexed: 05/10/2023]
Abstract
Wearable flexible strain sensors with spatial resolution enable the acquisition and analysis of complex actions for noninvasive personalized healthcare applications. To provide secure contact with skin and to avoid environmental pollution after usage, sensors with biocompatibility and biodegradability are highly desirable. Herein, wearable flexible strain sensors composed of crosslinked gold nanoparticle (GNP) thin films as the active conductive layer and transparent biodegradable polyurethane (PU) films as the flexible substrate are developed. The patterned GNP films (micrometer- to millimeter-scale square and rectangle geometry, alphabetic characters, and wave and array patterns) are transferred onto the biodegradable PU film via a facile, clean, rapid and high-precision contact printing method, without the need of a sacrificial polymer carrier or organic solvents. The GNP-PU strain sensor with low Young's modulus (≈17.8 MPa) and high stretchability showed good stability and durability (10 000 cycles) as well as degradability (42% weight loss after 17 days at 74 °C in water). The GNP-PU strain sensor arrays with spatiotemporal strain resolution are applied as wearable eco-friendly electronics for monitoring subtle physiological signals (e.g., mapping of arterial lines and sensing pulse waveforms) and large-strain actions (e.g., finger bending).
Collapse
Affiliation(s)
- Shin-Da Wu
- Institute of Polymer Science and Engineering, National Taiwan University, Taipei, 10617, Taiwan
- Institute of Physical Chemistry, University of Hamburg, 20146, Hamburg, Germany
| | - Shan-Hui Hsu
- Institute of Polymer Science and Engineering, National Taiwan University, Taipei, 10617, Taiwan
- Institute of Cellular and System Medicine, National Health Research Institutes, Miaoli, 35053, Taiwan
| | - Bendix Ketelsen
- Institute of Physical Chemistry, University of Hamburg, 20146, Hamburg, Germany
| | - Sophia C Bittinger
- Institute of Physical Chemistry, University of Hamburg, 20146, Hamburg, Germany
| | - Hendrik Schlicke
- Fraunhofer Center for Applied Nanotechnology CAN, 20146, Hamburg, Germany
| | - Horst Weller
- Institute of Physical Chemistry, University of Hamburg, 20146, Hamburg, Germany
- Fraunhofer Center for Applied Nanotechnology CAN, 20146, Hamburg, Germany
| | - Tobias Vossmeyer
- Institute of Physical Chemistry, University of Hamburg, 20146, Hamburg, Germany
| |
Collapse
|
16
|
Huang L, Chen Y, Xu Z, He C, Li Y, Zhao J, Tang Y. Regulating Al 2O 3/PAN/PEG Nanofiber Membranes with Suitable Phase Change Thermoregulation Features. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2313. [PMID: 37630898 PMCID: PMC10457868 DOI: 10.3390/nano13162313] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2023] [Revised: 08/07/2023] [Accepted: 08/10/2023] [Indexed: 08/27/2023]
Abstract
To address the thermal comfort needs of the human body, the development of personal thermal management textile is critical. Phase change materials (PCMs) have a wide range of applications in thermal management due to their large thermal storage capacity and their isothermal properties during phase change. However, their inherent low thermal conductivity and susceptibility to leakage severely limit their application range. In this study, polyethylene glycol (PEG) was used as the PCM and polyacrylonitrile (PAN) as the polymer backbone, and the thermal conductivity was increased by adding spherical nano-alumina (Al2O3). Utilizing coaxial electrospinning technology, phase-change thermoregulated nanofiber membranes with a core-shell structure were created. The study demonstrates that the membranes perform best in terms of thermal responsiveness and thermoregulation when 5% Al2O3 is added. The prepared nanofiber membranes have a melting enthalpy of 60.05 J·g-1 and retain a high enthalpy after 50 cycles of cold and heat, thus withstanding sudden changes in ambient temperature well. Additionally, the nanofiber membranes have excellent air permeability and high moisture permeability, which can increase wearer comfort. As a result, the constructed coaxial phase change thermoregulated nanofiber membranes can be used as a promising textile for personal thermal management.
Collapse
Affiliation(s)
- Leping Huang
- College of Materials Science and Engineering, Wuhan Textile University, Wuhan 430200, China; (L.H.); (Y.C.); (Y.L.)
| | - Ying Chen
- College of Materials Science and Engineering, Wuhan Textile University, Wuhan 430200, China; (L.H.); (Y.C.); (Y.L.)
| | - Zhaobao Xu
- Hubei Provincial Engineering Laboratory for Clean Production and High Value Utilization of Bio-Based Textile Materials, Wuhan Textile University, Wuhan 430200, China; (Z.X.); (C.H.)
| | - Cui He
- Hubei Provincial Engineering Laboratory for Clean Production and High Value Utilization of Bio-Based Textile Materials, Wuhan Textile University, Wuhan 430200, China; (Z.X.); (C.H.)
| | - Youmu Li
- College of Materials Science and Engineering, Wuhan Textile University, Wuhan 430200, China; (L.H.); (Y.C.); (Y.L.)
| | - Jinchao Zhao
- Hubei Provincial Engineering Laboratory for Clean Production and High Value Utilization of Bio-Based Textile Materials, Wuhan Textile University, Wuhan 430200, China; (Z.X.); (C.H.)
| | - Youhong Tang
- Flinders Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, Adelaide, SA 5042, Australia
| |
Collapse
|
17
|
Qu X, Li J, Han Z, Liang Q, Zhou Z, Xie R, Wang H, Chen S. Highly Sensitive Fiber Pressure Sensors over a Wide Pressure Range Enabled by Resistive-Capacitive Hybrid Response. ACS NANO 2023. [PMID: 37498777 DOI: 10.1021/acsnano.3c03484] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/29/2023]
Abstract
Soft capacitive pressure sensors with high performance are becoming increasingly in demand in the emerging flexible wearable field. While capacitive fiber pressure sensors have achieved high sensitivity, their sensitivity range is limited to low-pressure levels. As fiber sensors typically require preloading and fixation, this narrow range of high sensitivity poses a challenge for practical applications. To overcome this limitation, the study proposes resistive-capacitive hybrid response fiber pressure sensors (HFPSs) with three-layer core-sheath structures. The trigger and sensitivity enhancement mechanisms of the hybrid response are determined through model analysis and experimental verification. By adjustment of the sensitivity enhancement range of the hybrid response, the sensitivity attenuation of HFPSs is alleviated significantly. The obtained results demonstrate that HFPSs have excellent characteristics such as fast response, low hysteresis, wide response frequency, small signal drift, and good durability. The hybrid response enhances the practical sensitivity of HFPSs for various applications. With enhanced sensitivity, HFPSs can effectively monitor pulse signals at preloads ranging from 0 to 22.7 kPa. This wide range of preloads improves the fault tolerance of pulse monitoring and expands the potential application scenarios of fiber pressure sensors.
Collapse
Affiliation(s)
- Xiangyang Qu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Jing Li
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Zhiliang Han
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Qianqian Liang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Zhou Zhou
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Ruimin Xie
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Huaping Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| | - Shiyan Chen
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, PR China
| |
Collapse
|
18
|
Wang S, Zeng G, Sun Q, Feng Y, Wang X, Ma X, Li J, Zhang H, Wen J, Feng J, Ci L, Cabot A, Tian Y. Flexible Electronic Systems via Electrohydrodynamic Jet Printing: A MnSe@rGO Cathode for Aqueous Zinc-Ion Batteries. ACS NANO 2023. [PMID: 37411016 DOI: 10.1021/acsnano.3c00672] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/08/2023]
Abstract
Aqueous zinc-ion batteries (ZIBs) are promising candidates to power flexible integrated functional systems because they are safe and environmentally friendly. Among the numerous cathode materials proposed, Mn-based compounds, particularly MnO2, have attracted special attention because of their high energy density, nontoxicity, and low cost. However, the cathode materials reported so far are characterized by sluggish Zn2+ storage kinetics and moderate stabilities. Herein, a ZIB cathode based on reduced graphene oxide (rGO)-coated MnSe nanoparticles (MnSe@rGO) is proposed. After MnSe was activated to α-MnO2, the ZIB exhibits a specific capacity of up to 290 mAh g-1. The mechanism underlying the improvement in the electrochemical performance of the MnSe@rGO based electrode is investigated using a series of electrochemical tests and first-principles calculations. Additionally, in situ Raman spectroscopy is used to track the phase transition of the MnSe@rGO cathodes during the initial activation, proving the structural evolution from the LO to MO6 mode. Because of the high mechanical stability of MnSe@rGO, flexible miniaturized energy storage devices can be successfully printed using a high-precision electrohydrodynamic (EHD) jet printer and integrated with a touch-controlled light-emitting diode array system, demonstrating the application of flexible EHD jet-printed microbatteries.
Collapse
Affiliation(s)
- Shang Wang
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
- Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 45004, China
| | - Guifang Zeng
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona 08930, Spain
- Department of Electronic and Biomedical Engineering, Universitat de Barcelona, Barcelona 08028, Spain
| | - Qing Sun
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Yan Feng
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
| | - Xinxin Wang
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
| | - Xinyang Ma
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
| | - Jing Li
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - He Zhang
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
| | - Jiayue Wen
- Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 45004, China
| | - Jiayun Feng
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
| | - Lijie Ci
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Andreu Cabot
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona 08930, Spain
- ICREA Pg. Lluis Companys, Barcelona 08010, Spain
| | - Yanhong Tian
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
- Zhengzhou Research Institute, Harbin Institute of Technology, Zhengzhou 45004, China
| |
Collapse
|
19
|
Liu Y, Li K, Yao J, Li X, Xia Y. Copper-Coordinated Cellulose Fibers for Electric Devices with Motion Sensitivity and Flame Retardance. ACS APPLIED MATERIALS & INTERFACES 2023; 15:18272-18280. [PMID: 36999640 DOI: 10.1021/acsami.2c21821] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
Nanocomposite conductive fibers are of great significance in applications of wearable devices, smart textiles, and flexible electronics. Integration of conductive nanomaterials into flexible bio-based fibers with multifunctionality remains challenging due to interface failure, poor flexibility, and inflammability. Although having broader applications in textiles, regenerated cellulose fibers (RCFs) cannot meet the requirements of wearable electronics owing to their intrinsic insulation. In this study, we constructed conductive RCFs fabricated by coordinating copper ions with cellulose and reducing them into stable Cu nanoparticles coated on their surface. The Cu sheath offered excellent electrical conductivity (4.6 × 105 S m-1), electromagnetic interference shielding, and enhanced flame retardance. Inspired by plant tendrils, the conductive RCF was wrapped around an elastic rod to develop wearable sensors for human health and motion monitoring. The resultant fibers not only form stable conductive nanocomposites on the fiber surface by chemical bonds but also exhibit a huge potential for wearable devices, smart sensors, and flame-retardant circuits.
Collapse
Affiliation(s)
- Yide Liu
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, College of Materials Science and Engineering, Insititute of Marine Biobased Materials, Qingdao University, Ningxia Road 308, Qingdao 266071, P. R. China
| | - Kai Li
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, College of Materials Science and Engineering, Insititute of Marine Biobased Materials, Qingdao University, Ningxia Road 308, Qingdao 266071, P. R. China
| | - Jiuyong Yao
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, College of Materials Science and Engineering, Insititute of Marine Biobased Materials, Qingdao University, Ningxia Road 308, Qingdao 266071, P. R. China
| | - Xiankai Li
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, College of Materials Science and Engineering, Insititute of Marine Biobased Materials, Qingdao University, Ningxia Road 308, Qingdao 266071, P. R. China
| | - Yanzhi Xia
- State Key Laboratory of Bio-Fibers and Eco-Textiles, Collaborative Innovation Center for Marine Biomass Fibers, Materials and Textiles of Shandong Province, College of Materials Science and Engineering, Insititute of Marine Biobased Materials, Qingdao University, Ningxia Road 308, Qingdao 266071, P. R. China
| |
Collapse
|
20
|
Meena JS, Choi SB, Jung SB, Kim JW. Electronic textiles: New age of wearable technology for healthcare and fitness solutions. Mater Today Bio 2023; 19:100565. [PMID: 36816602 PMCID: PMC9932217 DOI: 10.1016/j.mtbio.2023.100565] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2022] [Revised: 01/25/2023] [Accepted: 01/25/2023] [Indexed: 01/30/2023] Open
Abstract
Sedentary lifestyles and evolving work environments have created challenges for global health and cause huge burdens on healthcare and fitness systems. Physical immobility and functional losses due to aging are two main reasons for noncommunicable disease mortality. Smart electronic textiles (e-textiles) have attracted considerable attention because of their potential uses in health monitoring, rehabilitation, and training assessment applications. Interactive textiles integrated with electronic devices and algorithms can be used to gather, process, and digitize data on human body motion in real time for purposes such as electrotherapy, improving blood circulation, and promoting wound healing. This review summarizes research advances on e-textiles designed for wearable healthcare and fitness systems. The significance of e-textiles, key applications, and future demand expectations are addressed in this review. Various health conditions and fitness problems and possible solutions involving the use of multifunctional interactive garments are discussed. A brief discussion of essential materials and basic procedures used to fabricate wearable e-textiles are included. Finally, the current challenges, possible solutions, opportunities, and future perspectives in the area of smart textiles are discussed.
Collapse
Affiliation(s)
- Jagan Singh Meena
- Research Center for Advanced Materials Technology, Core Research Institute, Sungkyunkwan University, Suwon, Republic of Korea
| | - Su Bin Choi
- Department of Smart Fab Technology, Sungkyunkwan University, Suwon, Republic of Korea
| | - Seung-Boo Jung
- School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Republic of Korea
| | - Jong-Woong Kim
- Department of Smart Fab Technology, Sungkyunkwan University, Suwon, Republic of Korea
- School of Mechanical Engineering, Sungkyunkwan University, Suwon, Republic of Korea
| |
Collapse
|
21
|
Pang J, Peng S, Hou C, Zhao H, Fan Y, Ye C, Zhang N, Wang T, Cao Y, Zhou W, Sun D, Wang K, Rümmeli MH, Liu H, Cuniberti G. Applications of Graphene in Five Senses, Nervous System, and Artificial Muscles. ACS Sens 2023; 8:482-514. [PMID: 36656873 DOI: 10.1021/acssensors.2c02790] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Abstract
Graphene remains of great interest in biomedical applications because of biocompatibility. Diseases relating to human senses interfere with life satisfaction and happiness. Therefore, the restoration by artificial organs or sensory devices may bring a bright future by the recovery of senses in patients. In this review, we update the most recent progress in graphene based sensors for mimicking human senses such as artificial retina for image sensors, artificial eardrums, gas sensors, chemical sensors, and tactile sensors. The brain-like processors are discussed based on conventional transistors as well as memristor related neuromorphic computing. The brain-machine interface is introduced for providing a single pathway. Besides, the artificial muscles based on graphene are summarized in the means of actuators in order to react to the physical world. Future opportunities remain for elevating the performances of human-like sensors and their clinical applications.
Collapse
Affiliation(s)
- Jinbo Pang
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China
| | - Songang Peng
- High-Frequency High-Voltage Device and Integrated Circuits R&D Center and Key Laboratory of Microelectronic Devices & Integrated Technology, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China
| | - Chongyang Hou
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China
| | - Hongbin Zhao
- State Key Laboratory of Advanced Materials for Smart Sensing, GRINM Group Co. Ltd., Xinwai Street 2, Beijing 100088, People's Republic of China
| | - Yingju Fan
- School of Chemistry and Chemical Engineering, University of Jinan, Shandong, Jinan 250022, China
| | - Chen Ye
- School of Chemistry and Chemical Engineering, University of Jinan, Shandong, Jinan 250022, China
| | - Nuo Zhang
- School of Chemistry and Chemical Engineering, University of Jinan, Shandong, Jinan 250022, China
| | - Ting Wang
- State Key Laboratory of Biobased Material and Green Papermaking and People's Republic of China School of Bioengineering, Qilu University of Technology, Shandong Academy of Sciences, No. 3501 Daxue Road, Jinan 250353, People's Republic of China
| | - Yu Cao
- Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology (Ministry of Education) and School of Electrical Engineering, Northeast Electric Power University, Jilin 132012, China
| | - Weijia Zhou
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China
| | - Ding Sun
- School of Electrical and Computer Engineering, Jilin Jianzhu University, Changchun 130118, P. R. China
| | - Kai Wang
- School of Electrical Engineering, Weihai Innovation Research Institute, Qingdao University, Qingdao 266000, China
| | - Mark H Rümmeli
- Leibniz Institute for Solid State and Materials Research Dresden, Dresden, D-01171, Germany.,College of Energy, Soochow Institute for Energy and Materials Innovations, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, Soochow University, Suzhou 215006, China.,Centre of Polymer and Carbon Materials, Polish Academy of Sciences, M. Curie Sklodowskiej 34, Zabrze 41-819, Poland.,Institute for Complex Materials, IFW Dresden, 20 Helmholtz Strasse, Dresden 01069, Germany.,Center for Energy and Environmental Technologies, VŠB-Technical University of Ostrava, 17. Listopadu 15, Ostrava 708 33, Czech Republic
| | - Hong Liu
- Collaborative Innovation Center of Technology and Equipment for Biological Diagnosis and Therapy in Universities of Shandong, Institute for Advanced Interdisciplinary Research (iAIR), University of Jinan, Jinan 250022, China.,State Key Laboratory of Crystal Materials, Center of Bio & Micro/Nano Functional Materials, Shandong University, 27 Shandanan Road, Jinan 250100, China
| | - Gianaurelio Cuniberti
- Institute for Materials Science and Max Bergmann Center of Biomaterials and Center for Advancing Electronics Dresden, Technische Universität Dresden, Dresden 01069, Germany
| |
Collapse
|
22
|
Karmakar RS, Chu CP, Li CL, Hsueh CH, Liao YC, Lu YW. Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback. BIOSENSORS 2023; 13:174. [PMID: 36831940 PMCID: PMC9953271 DOI: 10.3390/bios13020174] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 01/14/2023] [Accepted: 01/20/2023] [Indexed: 06/18/2023]
Abstract
Skin-inspired flexible tactile sensors, with interfacial microstructure, are developed on cellulose fiber substrates for subtle pressure applications. Our device is made of two cellulose fiber substrates with conductive microscale structures, which emulate the randomly distributed spinosum in between the dermis and epidermis layers of the human skin. The microstructures not only permit a higher stress concentration at the tips but also generate electrical contact points and change contact resistance between the top and bottom substrates when the pressure is applied. Meanwhile, cellulose fibers possessing viscoelastic and biocompatible properties are utilized as substrates to mimic the dermis and epidermis layers of the skin. The electrical contact resistances (ECR) are then measured to quantify the tactile information. The microstructures and the substrate properties are studied to enhance the sensors' sensitivity. A very high sensitivity (14.4 kPa-1) and fast recovery time (approx. 2.5 ms) are achieved in the subtle pressure range (approx. 0-0.05 kPa). The device can detect subtle pressures from the human body due to breathing patterns and voice activity showing its potential for healthcare. Further, the guitar strumming and chord progression of the players with different skill levels are assessed to monitor the muscle strain during guitar playing, showing its potential for posture feedback in playing guitar or another musical instrument.
Collapse
Affiliation(s)
- Rajat Subhra Karmakar
- Department of Biomechatronics Engineering, National Taiwan University, 10617 Taipei, Taiwan
| | - Chia-Pei Chu
- Department of Chemical Engineering, National Taiwan University, 10617 Taipei, Taiwan
| | - Chia-Lin Li
- Department of Materials Science and Engineering, National Taiwan University, 10617 Taipei, Taiwan
| | - Chun-Hway Hsueh
- Department of Materials Science and Engineering, National Taiwan University, 10617 Taipei, Taiwan
| | - Ying-Chih Liao
- Department of Chemical Engineering, National Taiwan University, 10617 Taipei, Taiwan
| | - Yen-Wen Lu
- Department of Biomechatronics Engineering, National Taiwan University, 10617 Taipei, Taiwan
| |
Collapse
|
23
|
Wu HC, Chen TCT, Chiu MC. Assessing the sustainability of smart healthcare applications using a multi-perspective fuzzy comprehensive evaluation approach. Digit Health 2023; 9:20552076231203903. [PMID: 37771716 PMCID: PMC10524080 DOI: 10.1177/20552076231203903] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 09/08/2023] [Indexed: 09/30/2023] Open
Abstract
A smart healthcare application can be judged as sustainable if it was already widely used before and will also be prevalent in the future. In contrast, if a smart healthcare application developed during the COVID-19 pandemic is not used after it, then it is not sustainable. Assessing the sustainability of smart healthcare applications is a critical task for their users and suppliers. However, it is also a challenging task due to the availability of data, users' subjective beliefs, and different perspectives. In response to this problem, this study proposes a multi-perspective fuzzy comprehensive evaluation approach to evaluate the sustainability of a smart healthcare application from qualitative, multi-criteria decision-making and time-series perspectives. The proposed methodology has been used to evaluate the sustainability of eight smart healthcare applications. The experimental results showed that the sustainability of a smart healthcare application evaluated from different perspectives may be different. Nevertheless, another technique can be used to confirm the evaluation result generated using one technique. In other words, these views compensate for each other.
Collapse
Affiliation(s)
- Hsin-Chieh Wu
- Department of Industrial Engineering and Management, Chaoyang University of Technology, Taichung City, Taiwan
| | - Tin-Chih Toly Chen
- Department of Industrial Engineering and Management, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
| | - Min-Chi Chiu
- Department of Industrial Engineering and Management, National Chin-Yi University of Technology, Taichung City, Taiwan
| |
Collapse
|
24
|
The Programmable Design of Large-Area Piezoresistive Textile Sensors Using Manufacturing by Jacquard Processing. Polymers (Basel) 2022; 15:polym15010078. [PMID: 36616428 PMCID: PMC9824245 DOI: 10.3390/polym15010078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 12/20/2022] [Accepted: 12/22/2022] [Indexed: 12/28/2022] Open
Abstract
Among wearable e-textiles, conductive textile yarns are of particular interest because they can be used as flexible and wearable sensors without affecting the usual properties and comfort of the textiles. Firstly, this study proposed three types of piezoresistive textile sensors, namely, single-layer, double-layer, and quadruple-layer, to be made by the Jacquard processing method. This method enables the programmable design of the sensor’s structure and customizes the sensor’s sensitivity to work more efficiently in personalized applications. Secondly, the sensor range and coefficient of determination showed that the sensor is reliable and suitable for many applications. The dimensions of the proposed sensors are 20 × 20 cm, and the thicknesses are under 0.52 mm. The entire area of the sensor is a pressure-sensitive spot. Thirdly, the effect of layer density on the performance of the sensors showed that the single-layer pressure sensor has a thinner thickness and faster response time than the multilayer pressure sensor. Moreover, the sensors have a quick response time (<50 ms) and small hysteresis. Finally, the hysteresis will increase according to the number of conductive layers. Many tests were carried out, which can provide an excellent knowledge database in the context of large-area piezoresistive textile sensors using manufacturing by Jacquard processing. The effects of the percolation of CNTs, thickness, and sheet resistance on the performance of sensors were investigated. The structural and surface morphology of coating samples and SWCNTs were evaluated by using a scanning electron microscope. The structure of the proposed sensor is expected to be an essential step toward realizing wearable signal sensing for next-generation personalized applications.
Collapse
|
25
|
Tian Y, Xu G, Cai K, Zhao X, Zhang B, Wang L, Wang T. Emerging biotransduction strategies on soft interfaces for biosensing. NANOSCALE 2022; 15:80-91. [PMID: 36512329 DOI: 10.1039/d2nr05444b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
As a lab-on-soft biochip providing accurate and timely biomarker information, wearable biosensors can satisfy the increasing demand for intelligent e-health services, active disease diagnosis/therapy, and huge bioinformation data. As biomolecules generally could not directly produce detectable signals, biotransducers that specifically convert biomolecules to electrical or optical signals are involved, which determines the pivotal sensing performance including 3S (sensitivity, selectivity, and stability), reversibility, etc. The soft interface poses new requirements for biotransducers, especially equipment-free, facile operation, mechanical tolerance, and high sensing performance. In this review, we discussed the emerging electrochemical and optical biotransduction strategies on wearables from the aspects of the transduction mechanism, amplification strategies, biomaterial selection, and device fabrication procedures. Challenges and perspectives regarding future biotransducers for monitoring trace amounts of biomolecules with high fidelity, sensitivity, and multifunctionality are also discussed. It is expected that through fusion with functional electronics, wearable biosensors can provide possibilities to further decentralize the healthcare system and even build biomolecule-based intelligent cyber-physical systems and new modalities of cyborgs.
Collapse
Affiliation(s)
- Yuanyuan Tian
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
- School of Science, Nanjing University of Posts and Telecommunications, Nanjing, 210023, China
| | - Guoliang Xu
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
| | - Kaiyu Cai
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
| | - Xiao Zhao
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
| | - Bo Zhang
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
- School of Science, Nanjing University of Posts and Telecommunications, Nanjing, 210023, China
| | - Lianhui Wang
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
| | - Ting Wang
- Key Laboratory for Organic Electronics and Information Displays & Jiangsu Key Laboratory for Biosensors, Institute of Advanced Materials (IAM), National Jiangsu Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing University of Posts and Telecommunications, 9 Wenyuan Road, Nanjing 210023, China.
| |
Collapse
|
26
|
Wu S, Zeng T, Liu Z, Ma G, Xiong Z, Zuo L, Zhou Z. 3D Printing Technology for Smart Clothing: A Topic Review. MATERIALS (BASEL, SWITZERLAND) 2022; 15:ma15207391. [PMID: 36295455 PMCID: PMC9609778 DOI: 10.3390/ma15207391] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2022] [Revised: 10/09/2022] [Accepted: 10/17/2022] [Indexed: 06/12/2023]
Abstract
Clothing is considered to be an important element of human social activities. With the increasing maturity of 3D printing technology, functional 3D printing technology can realize the perfect combination of clothing and electronic devices while helping smart clothing to achieve specific functions. Furthermore, the application of functional 3D printing technology in clothing not only provides people with the most comfortable and convenient wearing experience, but also completely subverts consumers' perception of traditional clothing. This paper introduced the progress of the application of 3D printing from the aspect of traditional clothing and smart clothing through two mature 3D printing technologies normally used in the field of clothing, and summarized the challenges and prospects of 3D printing technology in the field of smart clothing. Finally, according to the analysis of the gap between 3D-printed clothing and traditionally made clothing due to the material limitations, this paper predicted that the rise in intelligent materials will provide a new prospect for the development of 3D-printed clothing. This paper will provide some references for the application research of 3D printing in the field of smart clothing.
Collapse
Affiliation(s)
- Shuangqing Wu
- College of Engineering and Design, Hunan Normal University, Changsha 410081, China
| | - Taotao Zeng
- School of Materials Science and Engineering, Hunan University, Changsha 410082, China
| | - Zhenhua Liu
- College of Engineering and Design, Hunan Normal University, Changsha 410081, China
| | - Guozhi Ma
- College of Engineering and Design, Hunan Normal University, Changsha 410081, China
| | - Zhengyu Xiong
- College of Engineering and Design, Hunan Normal University, Changsha 410081, China
| | - Lin Zuo
- College of Engineering and Design, Hunan Normal University, Changsha 410081, China
| | - Zeyan Zhou
- School of Materials Science and Engineering, Hunan University, Changsha 410082, China
| |
Collapse
|
27
|
Shen S, Xiao X, Yin J, Xiao X, Chen J. Self-Powered Smart Gloves Based on Triboelectric Nanogenerators. SMALL METHODS 2022; 6:e2200830. [PMID: 36068171 DOI: 10.1002/smtd.202200830] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Revised: 08/14/2022] [Indexed: 06/15/2023]
Abstract
The hands are used in all facets of daily life, from simple tasks such as grasping and holding to complex tasks such as communication and using technology. Finding a way to not only monitor hand movements and gestures but also to integrate that data with technology is thus a worthwhile task. Gesture recognition is particularly important for those who rely on sign language to communicate, but the limitations of current vision-based and sensor-based methods, including lack of portability, bulkiness, low sensitivity, highly expensive, and need for external power sources, among many others, make them impractical for daily use. To resolve these issues, smart gloves can be created using a triboelectric nanogenerator (TENG), a self-powered technology that functions based on the triboelectric effect and electrostatic induction and is also cheap to manufacture, small in size, lightweight, and highly flexible in terms of materials and design. In this review, an overview of the existing self-powered smart gloves will be provided based on TENGs, both for gesture recognition and human-machine interface, concluding with a discussion on the future outlook of these devices.
Collapse
Affiliation(s)
- Sophia Shen
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA
| | - Xiao Xiao
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA
| | - Junyi Yin
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA
| | - Xiao Xiao
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA
| | - Jun Chen
- Department of Bioengineering, University of California, Los Angeles, CA, 90095, USA
| |
Collapse
|