Polymer Nanocomposite Dielectrics: Understanding the Matrix/Particle Interface

All-polymer piezo-ionic-electric electronics

Piezoelectric electronics possess great potential in flexible sensing and energy harvesting applications. However, they suffer from low electromechanical performance in all-organic piezoelectric systems due to the disordered and weakly-polarized interfaces. Here, we demonstrated an all-polymer piezo-ionic-electric electronics with PVDF/Nafion/PVDF (polyvinylidene difluoride) sandwich structure and regularized ion-electron interfaces. The piezoelectric effect and piezoionic effect mutually couple based on such ion-electron interfaces, endowing this electronics with the unique piezo-ionic-electric working mechanism. Further, owing to the massive interfacial accumulation of ion and electron charges, the electronics obtains a remarkable force-electric coupling enhancement. Experiments show that the electronics presents a high d33 of ~80.70 pC N-1, a pressure sensitivity of 51.50 mV kPa-1 and a maximum peak power of 34.66 mW m-2. It is applicable to be a transducer to light LEDs, and a sensor to detect weak physiological signals or mechanical vibration. This work shows the piezo-ionic-electric electronics as a paradigm of highly-optimized all-polymer piezo-generators.

Dilute nanocomposites for capacitive energy storage: progress, challenges and prospects

Electrostatic capacitors (ECs) are critical components in advanced electronics and electric power systems due to their rapid charge-discharge rate and high power density. While polymers are ideal for ECs due to their high voltage tolerance and mechanical flexibility, their low dielectric constants (K) and limited energy density remain significant limitations. Traditional polymer nanocomposites, which incorporate high-K ceramic fillers, have shown promise in enhancing dielectric properties but often at the cost of electric breakdown strength and scalability. In this perspective, we explore a pioneering approach that utilizes ultralow loadings of small-sized inorganic nanofillers to significantly improve dielectric constants without compromising other key properties. We delve into the unconventional effects observed in these polymer nanocomposites, including dielectric enhancements, charge trapping, mechanical reinforcements, and microstructural changes, and highlight the impressive energy storage performance achieved with minimal filler contents. We discuss innovative design strategies from viewpoints of polymer and filler structures and showcase recent advancements in nanoscale characterization and theoretical modelling for understanding the crucial role of polymer-filler interfaces. Finally, we stress fundamental challenges and prospects, providing insights into the transformative potential of these nanocomposites for next-generation energy storage applications.

Advances in Polymer Dielectrics with High Energy Storage Performance by Designing Electric Charge Trap Structures

Dielectric capacitors have been developed for nearly a century, and all-polymer film capacitors are currently the most popular. Much effort has been devoted to studying polymer dielectric capacitors and improving their capacitive performance, but their high conductivity and capacitance losses under high electric fields or elevated temperatures are still significant challenges. Although many review articles have reported various strategies to address these problems, to the best of current knowledge, no review article has summarized the recent progress in the high-energy storage performance of polymer-based dielectric films with electric charge trap structures. Therefore, this paper first reviews the charge trap characterization methods for polymeric dielectrics and discusses their strengths and weaknesses. The research progress on the design of charge trap structures in polymer dielectric films, including molecular chain optimization, organic doping, blending modification, inorganic doping, multilayered structures, and the mechanisms of the charge trap-induced enhancement of the capacitive performance of polymers are systematically reviewed. Finally, a summary and outlook on the fundamental theory of charge trap regulation, performance characterization, numerical calculations, and engineering applications are presented. This review provides a valuable reference for improving the insulation and energy storage performance of dielectric capacitive films.

Advanced Dielectric Materials for Triboelectric Nanogenerators: Principles, Methods, and Applications

Triboelectric nanogenerator (TENG) manifests distinct advantages such as multiple structural selectivity, diverse selection of materials, environmental adaptability, low cost, and remarkable conversion efficiency, which becomes a promising technology for micro-nano energy harvesting and self-powered sensing. Tribo-dielectric materials are the fundamental and core components for high-performance TENGs. In particular, the charge generation, dissipation, storage, migration of the dielectrics, and dynamic equilibrium behaviors determine the overall performance. Herein, a comprehensive summary is presented to elucidate the dielectric charge transport mechanism and tribo-dielectric material modification principle toward high-performance TENGs. The contact electrification and charge transport mechanism of dielectric materials is started first, followed by introducing the basic principle and dielectric materials of TENGs. Subsequently, modification mechanisms and strategies for high-performance tribo-dielectric materials are highlighted regarding physical/chemical, surface/bulk, dielectric coupling, and structure optimization. Furthermore, representative applications of dielectric materials based TENGs as power sources, self-powered sensors are demonstrated. The existing challenges and promising potential opportunities for advanced tribo-dielectric materials are outlined, guiding the design, fabrication, and applications of tribo-dielectric materials.

Remarkable Dielectric Breakdown Strength of Printable Polyelectrolyte Photopolymer Complexes

Polymer-based dielectrics are struggling to keep pace with the increasing demands of modern electronics. This lag in dielectric performance has spurred significant interest in the production of advanced dielectrics via novel chemistries and processing techniques. Polyelectrolyte complexes (PECs) have recently shown great promise as dielectric insulation, but processing challenges presented by these ionically bound networks limit their use to conformal thin films. Recent advances have enabled the additive manufacturing of PECs with vat photopolymerization, allowing the creation of a polyelectrolyte complex of arbitrary shape. Herein, multiple polyelectrolyte resin formulations, comprised of polyethylenimine and methacrylic acid (with varying amounts of 2-hydroxyethyl methacrylate and/or N,N-dimethylacrylamide), are investigated for the production of additively manufactured dielectric insulators. These dielectrics not only possess high dielectric breakdown strengths (>300 kV/mm), but their dielectric behavior can also be readily tailored through resin formulation and post-processing conditions. The presented vat photopolymerization of PECs allows for the creation of bulk dielectrics with arbitrary geometry, while the novel chemistry provides a practical route forward to produce dielectrics with precisely tailored properties for specific applications.

A "Bottom-Up" Strategy for High-Performance Benzocyclobutene (BCB)-Subnanometer Inorganic Nanocomposites

Developing benzocyclobutene (BCB) nanocomposites with ultra-small inorganic sizes represents a formidable challenge, although it offers great potential to produce materials with customizable structural and rich functional properties. In this study, we present a "bottom-up" design strategy for creating cross-linked benzocyclobutene (BCB) nanocomposites with highly dispersed nanodomains, such as organoalkoxysilane. This approach leverages ring-opening metathesis polymerization (ROMP) and thermally induced cycloaddition reactions to embed oligomeric silsesquioxanes, achieving a unique molecular structure with promising low-dielectric applications. The synthesis involves organoalkoxysilane and BCB as pendant groups of polynorbornenes that are covalently integrated. Additionally, the methoxyl groups of linear polymers could be further hydrolyzed under acidic conditions, and BCB groups could undergo thermal-induced ring-opening at high temperatures and Diels-Alder addition between themselves and vinyl groups, respectively. Fourier transform infrared (FTIR) spectroscopy analyses suggested the presence of ladder or network structures and high-resolution transmission electron microscopy (HRTEM) images presented the well-dispersed inorganic clusters, facilitating excellent dielectric properties with a dielectric constant (Dk) of 2.25 and a dissipation factor (Df) of 2.27 × 10-4. Compared with previously reported low-Dk materials, the cured nanocomposites also exhibited a significantly balanced enhancement of their comprehensive properties. This molecular bottom-up strategy provided a simple and universal method for constructing BCB-inorganic nanocomposites featuring a subnanometer inorganic structure, paving the way for future investigation into new classes of polymer-inorganic nanocomposites with a low Dk.

Dynamics of poly(methyl acrylate)/poly(methyl methacrylate)-grafted-Fe3O4 nanocomposites

We investigated the dynamics of nanocomposites prepared through mixing poly(methyl methacrylate) grafted Fe3O4 nanoparticles (PMMA-g-Fe3O4) with poly(methyl acrylate) (PMA). A key feature here different from previous dynamics measurements of polymer nanocomposites is the different chemistry between the matrix polymer and the polymer grafts, which introduces chemical heterogeneity. Transmission electron microscopy shows clear evidence of nanoparticle clustering due to the poor miscibility between the bulk PMA and the bulk PMMA. At the same time, broadband dielectric spectroscopy measurements detect two leading relaxations, i.e. the α and α* processes, where the α process is associated with the bulk PMA and the α* process from the PMA interacting with the grafted PMMA in the nanoparticle clustering region. Interestingly, the characteristic time of α*, τα*, is slightly slower than that of the α, τα, at high temperatures, and exhibits near Arrhenius temperature dependence at low temperatures. As a result, τα* and τα cross each other in the activation plot upon cooling and τα* ≪ τα is observed at temperatures approaching the glass transition temperature of PMA. These observations suggest the presence of component dynamics and the dynamics confinement effect between PMA and PMMA in the nanoparticle clustering region, highlighting an active interaction between PMA and PMMA at the interface despite their poor miscibility. These results thus suggest new routes to control interface dynamics through immiscible polymer pairs.

Enhanced high-temperature energy storage performances in polymer dielectrics by synergistically optimizing band-gap and polarization of dipolar glass

Polymer dielectrics play an irreplaceable role in electrostatic capacitors in modern electrical systems, and have been intensively studied with their polarization and breakdown strength (Eb) optimized for high discharged energy density (Ud) at elevated temperatures. Small molecules have been explored as fillers, yet they deteriorate thermal stability of matrix which limits their optimal loading to ~1 wt%. Herein, we develop a polymer blend dielectric consisting of common polyimide and a bifunctional dipolar glass polymer which are synthesized from two small molecule components with wide band-gap and large dipole moment. The bifunctional dipolar glass with large molecular weight not only maintains thermal stability of polymer blends even at a high loading of 10 wt%, but also induces substantial enhancement in polarization and Eb than any of individual components does, achieving an ultrahigh Ud of 8.34 J cm-3 (150 °C) and 6.21 J cm-3 (200 °C) with a charge-discharge efficiency of 90%.

Water/oil interfacial behaviors of soy hull polysaccharide revealed by molecular dynamics simulation and particle tracking microrheology

The soy hull polysaccharide (SHP) exhibits excellent interfacial activity and holds potential as an emulsifier for emulsions. To reveal the behavior of SHP at the water/oil (W/O) interface in situ, molecular dynamics (MD) simulations and particle tracking microrheology were used in this study. The results of MD reveal that SHP molecular spontaneously move toward the interface and rhamnogalacturonan-I initiates this movement, while its galacturonic acids on it act as anchors to immobilize the SHP molecules at the W/O interface. Microrheology results suggest that SHP forms microgels at the W/O interface, with the lattices of the microgels continually undergoing dynamic changes. At low concentrations of SHP and short interfacial formation time, the network of the microgels is weak and dominated by viscous properties. However, when SHP reaches 0.75 % and the interfacial formation time is about 60 min, the microgels show perfect elasticity, which is beneficial for stabilizing emulsions.

Functionalized montmorillonite/epoxy resin nanocomposites with enhanced thermal and mechanical properties

The poor interaction between the hydrophilic montmorillonite and hydrophobic epoxy resins leads to agglomeration of montmorillonite within epoxy resins, which finally results in poor macro properties of the epoxy resin nanocomposites. Although silane modification can improve the hydrophobicity of montmorillonite surface, the hydrolysis and condensation of silane lead to locking effect in the interlayer structure of functionalized montmorillonite. The effect of the functionalized montmorillonite on the properties of the epoxy resin remains unclear. Herein, we present multi technique approach to thoroughly evaluate the macro properties of the montmorillonite/epoxy resin nanocomposites, including dynamic mechanical thermal, thermo-mechanical, dielectric, water absorption and subsequently evaluate the molecular factors governing these characteristics. Importantly, the storage modulus has been enhanced by 44%, from 2416 MPa for pure epoxy resin to 2416 MPa for nanocomposites with 5.0 wt% functionalized montmorillonite. Our analysis reveals the increase of thermal stability and glass-transition temperature, as well as a reduction of the coefficient of thermal expansion with the addition of functionalized montmorillonite. Additionally, functionalized montmorillonite leads to decreased water absorption. This research aims to offer guidance for the development of high-performance montmorillonite/polymer nanocomposites, potentially opening up new applications for montmorillonite in polymer nanocomposites.

Magnetic-assisted alignment of nanofibers in a polymer nanocomposite for high-temperature capacitive energy storage applications

Flexible polymer-based dielectrics with high energy storage characteristics over a wide temperature range are crucial for advanced electrical and electronic systems. However, the intrinsic low dielectric constant and drastically degraded breakdown strength hinder the development of polymer-based dielectrics at elevated temperatures. Here, we propose a magnetic-assisted approach for fabricating a polyethyleneimine (PEI)-based nanocomposite with precisely aligned nanofibers within the polymer matrix, and with Al2O3 deposition layers applied on the surface. The resulting polymer nanocomposite exhibits simultaneously increased dielectric constant and enhanced breakdown strength at high temperatures compared to pristine PEI. The enhanced dielectric constant is contributed by the depolarization effect of out-of-plane orientated nanofibers in composite films, while the surficial Al2O3 layers, with a wide bandgap, effectively prevent charge injection and transport at the electrode/dielectric interface. The optimally aligned composite films exhibit a significantly enhanced discharged energy density of 6.5 J cm-3 at 150 °C, with approximately 41% and 132% enhancement compared to random films and pristine PEI films, respectively. Additionally, a metalized multilayer polymer-based capacitor utilizing this composite film produces a high capacitance of 88 nF, while demonstrating excellent cyclability and flexibility at 150 °C. This work offers an effective strategy for developing polymer-based composite dielectrics with superior capacitive performance at elevated temperatures and demonstrates the potential of fabricating high-quality flexible capacitors.

Enhancing the Output Performance of Triboelectric Nanogenerator Through Regulation of its Internal Nano-Architecture

Triboelectric Nanogenerator (TENG) has proven highly effective in converting mechanical energy into electrical energy. Previous research on manipulating microstructure for performance enhancement primarily focused on the surface of TENGs. In this study, an innovative bottom-up strategic design to control the internal nano-architecture for the enhanced output of TENG is proposed. This multiscale structural design strategy consists of defect chemistry (angstrom-scale), surface modification (nano-scale), and spatial regulation of nanoparticles (meso-scale), which helps explore the optimal utilization of TENG's internal structure. After fine-tuning the nano-architecture, the output voltage is significantly increased. This optimized TENG serves as a robust platform for developing self-powered systems, including self-powered electrochemical chlorination systems for sterilization. Additionally, through the utilization of multiscale simulations (density functional theory, all-atom molecular dynamics, and dissipative particle dynamics), the underlying mechanisms governing how the optimized nanoparticle-polymer interface and spatial arrangement of nanoparticles influence the storage and transfer of charges are comprehensively elucidated. This study not only demonstrates the effectiveness of manipulating internal nano-architecture to enhance TENG performance for practical applications but also provides invaluable insights into structural engineering for TENG advancement.

Atomic-Level Matching Metal-Ion Organic Hybrid Interface to Enhance Energy Storage of Polymer-Based Composite Dielectrics

In this work, a distinctive "metal-ion organic hybrid interface" (MOHI) between polyimide (PI) and calcium niobate (CNO) nanosheets is designed. The metal ions in the MOHI can achieve atomic-level matching not only with the inorganic CNO, but also with the PI chains, forming uniform and strong chemical bonds. These results are demonstrated by experiment and theory calculations. Significantly, the MOHI reduces the free volume and introduces deep traps across the filler-matrix interfacial area, thus suppressing the electric field distortion in PI-based composite dielectrics. Consequently, PI-based dielectric containing the MOHI exhibits excellent energy storage performance. The energy storage densities (Ue) of the composite dielectric reach 9.42 J cm-3 and 4.75 J cm-3 with energy storage efficiency (η) of 90% at 25 °C and 150 °C respectively, which are 2.6 and 11.6 times higher than those of pure PI. This study provides new ideas for polymer-based composite dielectrics in high energy storage.

Largely Improved Creep Resistance and Thermal-Aging Stability of Eco-Friendly Polypropylene High-Voltage Insulation by Long-Chain Branch-Induced Interfacial Constraints

Polypropylene (PP)-based composites have attracted numerous attention as a replacement of prevailing cross-linked polyethylene (XLPE) for high-voltage insulation due to their ease of processing, recyclability, and excellent electrical performance. However, the poor resistances against high-temperature creep and thermal aging are obstacles to practical applications of PP-based thermoplastic high-voltage insulation. To address these problems, in this Letter, we synthesized an impact polypropylene copolymer (IPC) containing multifold long-chain branched (LCB) structures in phases, especially the interfaces between the PP matrix and the rubber phase. The results indicated that the structural stability of LCBIPC was significantly enhanced under extreme conditions. In comparison to IPC (without LCB structures), 24.1% less creep strain and 75.2% less unrecoverable deformation are achieved in LCBIPC at 90 °C. In addition, the thermal aging experiments were performed at 135 °C for 48 and 88 days for IPC and LCBIPC, respectively. The results show that the resistance against thermal aging was also enhanced in LCBIPC, which showed a 133% longer thermal aging life compared to IPC. Further results revealed that the interfacial layer between the PP matrix and the rubber phase was constructed in LCBIPC. The two phases are tightly linked by chemical bonds in LCB structures, leading to enforced constraints of the rubber phase at the micro level and better resistance performance against creep and thermal aging at the macro level. Evidently, the reported eco-friendly LCBIPC thermoplastic insulation shows great potential for applications in high-voltage cable insulation.

On-Demand MXene-Coupled Pyroelectricity for Advanced Breathing Sensors and IR Data Receivers

MXene-inspired two-dimensional (2D) materials like Ti3C2Tx are widely known for their versatile properties, including surface plasmon, higher electrical conductivity, exceptional in-plane tensile strength, EMI shielding, and IR thermal properties. The MXene nanosheets coupled poly(vinylidene fluoride) (PVDF) nanofibers with d33 ∼-26 pm V-1 are able to capture the smaller thermal fluctuation due to a superior pyroelectric coefficient of ∼130 nC m-2 K-1 with an improved (∼7 times with respect to neat PVDF nanofibers) pyroelectric current figure of merit (FOMi). The significant enhancement of the pyroelectric response is attributed to the confinement effect of 2D MXene (Ti3C2Tx) nanosheets within PVDF nanofibers, as evidenced from polarized Fourier transform infrared (FTIR) spectroscopy and scanning probe microscopy (SPM). In subsequent studies, the practical applications of self-powered pyroelectric sensors of MXene-PVDF have been demonstrated. The fabricated flexible, hydrophobic pyroelectric sensor could be utilized as an excellent pyroelectric breathing sensor, a proximity sensor, and an IR data transmission receiver. Further, supervised machine learning algorithms are proposed to distinguish different types of breathing signals with ∼98% accuracy for healthcare monitoring purposes.

Significantly Enhanced Energy Density of Polyvinylidene Fluoride/Polyimide-Based Nanocomposites by Core-Shell BaTiO3@SiO2

Improving the limited energy storage capacity of dielectric materials has long been an attractive challenge. In this work, a four-phase hybridized nanocomposite was designed. The linear polymer polyimide (PI) was added to the ferroelectric polymer polyvinylidene fluoride (PVDF) and compounded with a nanoceramic BT@SiO2 with a core-shell structure. The results show that PVDF-PI/BT@SiO2 nanocomposites prepared by a straightforward spin-coating method have a significantly increased discharge energy density. The polymer blends obtain a tightly extended conformation in the amorphous region. Also, this provides an excellent matrix environment for the homogeneous dispersion of fillers. The core-shell structure, as a physical barrier, not only hinders the expansion of the breakdown path but also extends multiple polarization surfaces with gradient variations at the microscopic level. Therefore, the synergistic effect generated by polymer blending and core-shell structure effectively enhances the dielectric and stored energy characteristics of nanocomposites. The dielectric constant is stable at 11.39-18.7, and the dielectric loss is always lower than 0.136. The discharge energy density is 2.5 J/cm3, almost 110% higher than that of the BOPP films (about 1.2 J/cm3). These experimental results suggest that the composite system using core-shell structure and polymer blending is a new way to improve the energy density of dielectric materials.

Scalable co-cured polyimide/poly(p-phenylene benzobisoxazole) all-organic composites enabling improved energy storage density, low leakage current and long-term cycling stability

The all-organic high-temperature polymer dielectrics with promising scale-up potential have witnessed much progress in the energy storage area, etc. However, the electron suppression trap mechanisms behind many all-organic dielectrics are still unclear, especially for high temperature resistant poly(p-phenylene benzobisoxazole) (PBO) polymers. To resolve this tough issue, we herein innovatively prepared PBO-based all-organic thin films containing sulfone-based polyimide (P(DSDA-ODA)) functioning as an electron trap phase using a facile and scalable co-curing method. The great linear dielectric properties of the prepared P(DSDA-ODA)/PBO films hold high dielectric thermal stability over the temperature range from 25 °C to 200 °C. The 60 wt% P(DSDA-ODA) systems yield the lowest leakage current (3.8 × 10-8 A cm-2). The tight structure and reduced leakage current enable an enhanced breakdown strength of 60 wt% P(DSDA-ODA)/PBO (470 kV mm-1), which is 1.7 times that of pure PBO. Meanwhile, it can reach 4.16 J cm-3 of energy density, which is 257% higher than that for pure PBO thin films while concurrently maintaining a long stable charge-discharge cycle (at least 5000 times) and high charge-discharge efficiency at 85.10%. Moreover, P(DSDA-ODA)/PBO still exhibits excellent energy storage performance at high temperature compared to PBO. This innovative strategy is further verified by replacing P(DSDA-ODA) with P(6FDA-ODA), and therefore lays a solid foundation for more investigation on scalable all-organic dielectrics.

Flexible Copper Nanowire/Polyvinylidene Fluoride Membranous Composites with a Frequency-Independent Negative Permittivity

With the increasing popularity of wearable devices, flexible electronics with a negative permittivity property have been widely applied to wearable devices, sensors, and energy storage. In particular, a low-frequency dispersion negative permittivity in a wide frequency range can effectively contribute to the stable working performance of devices. In this work, polyvinylidene fluoride (PVDF) was selected as the flexible matrix, and copper nanowires (CuNWs) were used as the conductive functional filler to prepare a flexible CuNWs/PVDF composite film with a low-frequency dispersion negative permittivity. As the content of CuNWs increased, the conductivity of the resulting composites increased sharply and presented a metal-like behavior. Moreover, the negative permittivity consistent with the Drude model was observed when CuNWs formed a percolative network. Meanwhile, the negative permittivity exhibited a low-frequency dispersion in the whole test frequency range, and the fluctuation of the permittivity spectra was relatively small (-760 to -584) at 20 kHz-1 MHz. The results revealed that the high electron mobility of CuNWs is reasonable for the low-frequency dispersion of negative permittivity. CuNWs/PVDF composite films with a frequency-independent negative permittivity provide a new idea for the development of flexible wearable electronic devices.

Double Effects of Oxidative Aging on Carbon Nanotube-Asphalt Nanocomposite Interfaces: Enhancement and Deterioration

Understanding the mechanisms of oxidative aging effects on the carbon nanotube (CNT)-asphalt nanocomposite interface has long been a challenge, as there are two opposing effects: enhancement and deterioration. In this study, a multiscale coupling method is proposed to analyze the dual effect of oxidative aging on the CNT-asphalt nanocomposite. The method is based on density functional theory (DFT) and molecular dynamics (MD) simulations, supported by microscopic interface observation and macroscopic property testing with a focus on the composite interface. The results show that oxidative aging has a resetting effect on benzene ring stacking at the interface and enhances the binding energy of CNT-asphalt. Meanwhile, oxidative aging enhanced the interfacial charge transfer, but no chemical reaction occurred between CNT-aged asphalt. This is also verified by Fourier Transform Infrared Spectroscopy (FTIR). Enhancement and degeneration effects of oxidative aging occur via distinct mechanisms. Oxidative aging enhanced the interfacial shear barrier by approximately 5% and the energy barrier by 44.87%, which increased the high-temperature deformation resistance of the CNT-asphalt nanocomposites. However, molecular oxidation was not responsible for the decline in the fatigue resistance. According to scanning electron microscopy (SEM) and atomic force microscopy (AFM) results, oxidative aging elevates the content of polar molecules, leading to an increase in the solid properties of asphalt and a 39.6% decrease in surface adhesion. This disrupts the three-dimensional network of the CNT and ultimately leads to a reduction in crack resistance. This study clarifies the mechanism underlying the dual effect of oxidative aging and provides fundamental support for understanding asphalt aging behavior and the interfacial behavior of composites.

Polyimides Physically Crosslinked by Aromatic Molecules Exhibit Ultrahigh Energy Density at 200 °C

Polymer dielectrics possess significant advantages in electrostatic energy storage applications, such as high breakdown strength (Eb ) and efficiency (η), while their discharged energy density (Ud ) at high temperature is limited by the decrease in Eb and η. Several strategies including introducing inorganic components and crosslinking have been investigated to improve the Ud of polymer dielectrics, but new issues will be encountered, e.g., the sacrifice of flexibility, the degradation of the interfacial insulating property and the complex preparation process. In this work, 3D rigid aromatic molecules are introduced into aromatic polyimides to form physical crosslinking networks through electrostatic interactions between their oppositely charged phenyl groups. The dense physical crosslinking networks strengthen the polyimides to boost the Eb , and the aromatic molecules trap the charge carriers to suppress the loss, allowing the strategy to combine the advantages of inorganic incorporation and crosslinking. This study demonstrates that this strategy is well applicable to a number of representative aromatic polyimides, and ultrahigh Ud of 8.05 J cm-3 (150 °C) and 5.12 J cm-3 (200 °C) is achieved. Furthermore, the all-organic composites exhibit stable performances during ultralong 105 charge-discharge cycles in harsh environments (500 MV m-1 and 200 °C) and prospects for large-scale preparation.

Thermally activated dynamic bonding network for enhancing high-temperature energy storage performance of PEI-based dielectrics

To address the paradox of mutually exclusive confusions between the breakdown strength and polarization of the polymer-based composites at high-temperature, a dynamic multisite bonding network is constructed by connecting the -NH2 groups of polyetherimide (PEI) and Zn2+ in metal-organic frameworks (MOFs). Owing to the multisite bonding network being dynamically stable at high-temperature, the composites possess a high breakdown strength of 588.1 MV m-1 at 150 °C, which is 85.2% higher than that of PEI. Importantly, the multisite bonding network could be thermally activated at high-temperature to generate extra polarization, which is because the Zn-N coordination bonds are evenly stretched. At similar electric fields, the composites show higher energy storage density at high-temperature compared with that at room temperature, and present excellent cycling stability even with increased electrode size. Finally, the reversible stretching of the multisite bonding network against temperature variation is confirmed by the in situ X-ray absorption fine structure (XAFS) and theoretical calculations. This work presents a pioneering example of the construction of self-adaptive polymer dielectrics in extreme environments, which might be a potential method for designing recyclable polymer-based capacitive dielectrics.

Insight into Interfacial Polarization for Enhancing Piezoelectricity in Ferroelectric Nanocomposites

The interfacial effect is widely used to optimize the properties of ferroelectric nanocomposites, however, there is still a lack of direct evidence to understand its underlying mechanisms limited by the nano size and complex structures. Here, taking piezoelectricity, for example, the mechanism of interfacial polarization in barium titanate/poly(vinylidene fluoride-ran-trifluoroethylene) (BTO/P(VDF-TrFE)) nanocomposite is revealed at multiple scales by combining Kelvin probe force microscope (KPFM) with theoretical stimulation. The results prove that the mismatch of permittivity between matrix and filler leads to the accumulation of charges, which in turn induces local polarization in the interfacial region, and thus can promote piezoelectricity independently. Furthermore, the strategy of interfacial polarization to enhance piezoelectricity is extended and validated in other two similar nanocomposites. This work uncovers the mechanism of interfacial polarization and paves newfangled insights to boost performances in ferroelectric nanocomposites.

Plasma Fluorinated Nano-SiO2 Enhances the Surface Insulation Performance of Glass Fiber Reinforced Polymer

With the extensive application of glass fiber reinforced polymer (GFRP) in the field of high voltage insulation, its operating environment is becoming more and more complex, and the surface insulation failure has gradually become a pivotal problem affecting the safety of equipment. In this paper, nano-SiO₂ was fluorinated by Dielectric barrier discharges (DBD) plasma and doped with GFRP to enhance the insulation performance. Through Fourier Transform Ioncyclotron Resonance (FTIR) and X-ray Photoelectron Spectroscopy (XPS) characterization of nano fillers before and after modification, it was found that plasma fluorination can graft a large number of fluorinated groups on the surface of SiO₂. The introduction of fluorinated SiO₂ (FSiO₂) can significantly enhance the interfacial bonding strength of the fiber, matrix and filler in GFRP. The DC surface flashover voltage of modified GFRP was further tested. The results show that both SiO₂ and FSiO₂ can improve the flashover voltage of GFRP. When the concentration of FSiO₂ is 3%, the flashover voltage increases most significantly to 14.71 kV, which is 38.77% higher than that of unmodified GFRP. The charge dissipation test results show that the addition of FSiO₂ can inhibit the surface charge migration. By the calculation of Density functional theory (DFT) and charge trap, it is found that grafting fluorine-containing groups on SiO₂ can increase its band gap and enhance its electron binding ability. Furthermore, a large number of deep trap levels are introduced into the nanointerface inside GFRP to enhance the inhibition of secondary electron collapse, thus increasing the flashover voltage.