Universal Near-Infrared and Mid-Infrared Optical Modulation for Ultrafast Pulse Generation Enabled by Colloidal Plasmonic Semiconductor Nanocrystals

Fabrication of Two-Dimensional Homo-Bimetallic Porphyrin Framework Thin Films for Optimizing Nonlinear Optical Limiting

Developing efficient metal-organic framework (MOF) optical devices with tunable third-order nonlinear optical (NLO) properties is an important challenge for scientific research and practical application. Herein, 2D monometallic and hetero/homo-bimetallic porphyrin MOF thin films (ZnTCPP(M) M = H2, Fe, Zn) were fabricated using the liquid-phase epitaxial (LPE) layer-by-layer (LBL) method to investigate the metal substitution dependent third-order NLO behavior. The prepared homo-bimetallic ZnTCPP(Zn) thin film exhibited enhanced third-order NLO performance with a higher third-order nonlinear susceptibility of ∼4.21 × 10-7 esu compared to monometallic and hetero-bimetallic counterparts. Additionally, theoretical calculations were performed to complement the experimental findings and revealed that the enhanced NLO effect of the ZnTCPP(Zn) thin film is mainly attributed to the enhanced local excitation. These findings not only provide a comprehensive understanding of the relationship between metal types and the NLO behavior of porphyrin MOF thin films but also offer valuable insights into the design and optimization of NLO devices.

A Cut-to-Link Strategy for Cubane-Based Heterometallic Sulfide Clusters with Giant Third-Order Nonlinear Optical Response

Although the synthesis of low-dimensional metal sulfides by assembling cluster-based units is expected to promote the development of optical materials and models of enzyme active centers such as dinitrogenase, it is faced with limited assembly methodology. Herein we present a cut-to-link strategy to generate high-nuclearity assemblies, inspired by the formation of a Z-type dimer of the W-S-Cu analogues of P^N cluster through in situ release of active linkers. Four new compounds with structures based on the same {Tp*WS₃Cu₃} incomplete cubane-like units were obtained using varied combinations of mild reagents. Open-aperture Z-scan measurements demonstrated the highest-nuclearity complex has the largest nonlinear optical absorption coefficient among discrete cluster-based materials reported to date. This approach enables building high-nuclearity metal sulfide clusters through cluster-based building blocks and opens a way to the design and exploration of materials based on well-identified building blocks.

Broadband saturable absorption of indium tin oxide nanocrystals toward mid-infrared regime

We experimentally demonstrate the ultrabroadband optical nonlinearity of indium tin oxide nanocrystals (ITO NCs) in the mid-infrared regime. Especially, the ITO NCs show considerable saturation absorption behavior with large modulation depth covering the spectral range from 2-µm to 10-µm wavelength. We also demonstrate the application of the optical nonlinearity to successfully modulate the erbium-doped fluoride fiber laser to deliver a nanosecond pulse with a signal-to-noise ratio over 43 dB at 2.8-µm wavelength. The results provide a promising platform for the development of ITO-based broadband and robust optoelectronic devices toward the deep mid-infrared spectral range.

Ultrafast low-pump fluence all-optical modulation based on graphene-metal hybrid metasurfaces

Graphene is an attractive material for all-optical modulation because of its ultrafast optical response and broad spectral coverage. However, all-optical graphene modulators reported so far require high pump fluence due to the ultrashort photo-carrier lifetime and limited absorption in graphene. We present modulator designs based on graphene-metal hybrid plasmonic metasurfaces with highly enhanced light-graphene interaction in the nanoscale hot spots at pump and probe (signal) wavelengths. Based on this design concept, we have demonstrated high-speed all-optical modulators at near and mid-infrared wavelengths (1.56 μm and above 6 μm) with significantly reduced pump fluence (1-2 orders of magnitude) and enhanced optical modulation. Ultrafast near-infrared pump-probe measurement results suggest that the modulators' response times are ultimately determined by graphene's ultrafast photocarrier relaxation times on the picosecond scale. The proposed designs hold the promise to address the challenges in the realization of ultrafast all-optical modulators for mid-and far-infrared wavelengths.

Novel nanomaterials based saturable absorbers for passive mode locked fiber laser at 1.5μm

Compared with continuous wave lasers, ultrafast lasers have the advantages of ultra-short pulse width and ultra-high peak power, and have significant applications in optical communications, medical diagnostics, and precision machining. Saturable absorber (SA) technology is the most effective technique for the generation of ultra-fast lasers, which are based on artificial SAs and natural SAs. Among them, the semiconductor saturable absorber mirror has become the most commonly used form at present. Recently, basic research and application of nanomaterials such as carbon nanotubes (CNTs) and graphene have been developed rapidly. Researchers have found that nanomaterials exhibit extraordinary characteristics in ultrafast photonics, such as the low saturation intensity of CNTs, zero-band gap of graphene, and extremely high modulation depth of the topological insulator nano-films. Since graphene was first reported as an SA in 2009, many other nanomaterials have been successively explored, resulting in the rapid development of novel nanomaterial-based SAs. In this paper, we classified the nanomaterials used in SA mode-locking technology at 1.5μm and reviewed their research progress with a particular focus on nonlinear optical properties, integration strategies, and applications in the field of ultrafast photonics.

Oriented Assembly of 2D Metal-Pyridylporphyrinic Framework Films for Giant Nonlinear Optical Limiting

The development of metal-organic frameworks (MOFs) with nonlinear optical (NLO) properties is of pronounced significance for optical devices. Herein, a series of 2D MOFs ZnTPyP(M) (TPyP = 5,10,15,20-tetrakis(4-pyridyl)porphyrin, M = Cu, Ni, Mn, H₂) films with [010]-orientation growth composed of ultrathin nanosheets from a pyridylporphyrinic ligand are first obtained by using a liquid-phase epitaxial (LPE) layer-by-layer (lbl) growth approach. ZnTPyP(M) films show a giant nonlinear optical limiting (OL) response and can be modulated by tuning the type of metalloporphyrinic ligands. As a result, ZnTPyP(Cu) film exhibits the highest nonlinear absorption coefficient of 5.7 × 10^-6 m/W compared to other reported NLO materials. Density functional theory calculations were consistent with the experimental results, revealing that the tunable π-π* local excitation and the increased delocalization of the metalloporphyrinic group regulate the NLO performance of ZnTPyP(M) films. These findings provide new insight into the effect of 2D porphyrinic MOFs toward the NLO response and offer new film candidates for nonlinear OL application.

Interpenetrated Metal-Porphyrinic Framework for Enhanced Nonlinear Optical Limiting

Structural interpenetration in metal-organic frameworks (MOFs) significantly impacts on their properties and functionalities. However, understanding the interpenetration on third-order nonlinear optics (NLO) of MOFs have not been reported to date. Herein, we report two 3D porphyrinic MOFs, a 2-fold interpenetrated [Zn₂(TPyP)(AC)₂] (ZnTPyP-1) and a noninterpenetrated [Zn₃(TPyP)(H₂O)₂(C₂O₄)₂] (ZnTPyP-2), constructed from 5,10,15,20-tetra(4-pyridyl)porphyrin (TPyP(H₂)) and Zn(NO₃)₂ (AC = acetate, C₂O₄ = oxalate). ZnTPyP-1 achieves excellent optical limiting (OL) performance with a giant nonlinear absorption coefficient (3.61 × 10⁶ cm/GW) and large third-order susceptibility (7.73 × 10^-7 esu), which is much better than ZnTPyP-2 and other reported OL materials. The corresponding MOFs nanosheets are dispersed into a polydimethylsiloxane (PDMS) matrix to form highly transparent and flexible MOFs/PDMS glasses for practical OL application. In addition, the OL response optimized by adjusting the MOFs concentration in the PDMS matrix and the type of metalloporphyrin are discussed in the ZnTPyP-1 system. The theoretical calculation confirmed that the abundant π-π interaction from porphyrinic groups in the interpenetrated framework increased the electron delocalization/transfer and boosted the OL performance. This study opens a new avenue to enhance OL performance by the construction of interpenetrated structures and provides a new approach for the preparation of transparent and flexible MOF composites in nonlinear optical applications.

Colloidal Two-Dimensional Metal Chalcogenides: Realization and Application of the Structural Anisotropy

ConspectusDue to the spatial confinement, two-dimensional metal chalcogenides display an extraordinary optical response and carrier transport ability. Solution-based synthesis techniques such as colloidal hot injection and ion exchange provide a cost-effective way to fabricate such low-dimensional semiconducting nanocrystals. Over the years, developments in colloidal chemistry made it possible to synthesize various kinds of ultrathin colloidal nanoplatelets, including wurtzite- and zinc blende-type CdSe, rock salt PbS, black phosphorus-like SnX (X = S or Se), hexagonal copper sulfides, selenides, and even transition metal dichalcogenides like MoS₂. By altering experimental conditions and applying capping ligands with specific functional groups, it is possible to accurately tune the dimensionality, geometry, and consequently the optical properties of these colloidal metal chalcogenide crystals. Here, we review recent progress in the syntheses of two-dimensional colloidal metal chalcogenides (CMCs) and property characterizations based on optical spectroscopy or device-related measurements. The discoveries shine a light on their huge prospect for applications in areas such as photovoltaics, optoelectronics, and spintronics. In specific, the formation mechanisms of two-dimensional CMCs are discussed. The growth of colloidal nanocrystals into a two-dimensional shape is found to require either an intrinsic structural asymmetry or the assist of coexisted ligand molecules, which act as lamellar double-layer templates or "facet" the crystals via selective adsorption. By performing optical characterizations and especially ultrafast spectroscopic measurements on these two-dimensional CMCs, their unique electronic and excitonic features are revealed. A strong dependence of optical transition energies linked to both interband and inter-subband processes on the crystal geometry can be verified, highlighting a tremendous confinement effect in such nanocrystals. With the self-assembly of two-dimensional nanocrystals or coupling of different phases by growing heterostructures, unconventional optical performances such as charge transfer state generation or efficient Förster resonance energy transfer are discovered. The growth of large-scale individualized PbS and SnS nanosheets can be realized by facile hot injection techniques, which gives the opportunity to investigate the charge carrier behavior within a single nanocrystal. According to the results of the device-based measurements on these individualized crystals, structure asymmetry-induced anisotropic electrical responses and Rashba effects caused by a splitting of spin-resolved bands in the momentum space due to strong spin-orbit-coupling are demonstrated. It is foreseen that such geometry-controlled, large-scale two-dimensional CMCs can be the ideal materials used for designing high-efficiency photonics and electronics.

Third-Order Nonlinear Optical Behavior of an Amide-Tricarboxylate Zinc(II) Metal-Organic Framework with Two-Fold 3D+3D Interpenetration

A new metal-organic framework (MOF), [Zn₄(μ₄-O)(μ₆-L)₂(H₂O)₂]_n·nDMF (ZSTU-10), was assembled from zinc(II) nitrate and N,N',N″-bis(4-carboxylate)trimesicamide linkers and fully characterized. Its crystal structure discloses an intricate two-fold 3D+3D interpenetrated MOF driven by the [Zn₄(μ₄-O)]-based tetragonal secondary building units and the C3-symmetric tris-amide-tricarboxylate linkers (μ₆-L^3-). Topological analysis of ZSTU-10 reveals two interpenetrated 3,6-connected nets with an rtl (rutile) topology. Z-Scan analysis at 532 nm was conducted to study a nonlinear optical (NLO) behavior of ZSTU-10. The nonlinear responses of ZSTU-10 were explored under various laser intensities, revealing notable third-order NLO properties in the visible region. A large two-photon absorption at lower incident intensities highlights the fact that ZSTU-10 can be applied in optical limiting devices as well as optical modulators. Moreover, a nonlinear refractive index (n₂) is indicative of a self-defocusing behavior. This work thus expands a family of novel MOF materials with remarkable optical properties.

Enhancing Reverse Saturable Absorption in SnS2 Nanosheets by Plasma Treatment

The knowledge concerning the influence of defects on the nonlinear optical response of materials remains scarce so far. In this work, we have successfully introduced defects into SnS₂ nanosheets by plasma treatment and shown that a defect generation is an effective approach to significantly improve the reverse saturable absorption of SnS₂. The SnS₂ nanosheets treated with Ar plasma for 40 s exhibit a nonlinear absorption coefficient (β₀) as large as (2.9 ± 0.12) × 10⁴ cm GW^-1, which is nearly 9 times that of the untreated sample. The influence of Ar-plasma-treatment time, defect type, and defect number on the nonlinear absorption of SnS₂ nanosheets are also studied. Structure and spectroscopy characterization confirms the introduction of S and Sn vacancies with Ar-plasma etching. Surface photovoltage spectroscopy and density functional theory calculation indicate that S vacancies can induce in-gap states in the band gap. These in-gap states act as intermediate states for the successive absorption of photons during femtosecond laser excitation (namely, excited-state absorption). In contrast, Sn defects cannot lead to in-gap states and have a limited contribution to nonlinear absorption. Our result would provide a promising way to improve optical nonlinearities.

Nanoscale Engineering of Optical nonlinearity Based on a Metal Nitride/Oxide Heterostructure

The abilities to modulate linear and nonlinear optical response of materials in the nanoscale are of central importance in the design and fabrication of photonic devices for applications like optical modulators. Here, based on a simple transition metal oxide/nitride (TiO₂/TiN) system, we show that it is possible to tune the optical properties by controlling the nanoscale architecture. Through controlled oxidation of the plasmonic TiN nanoparticle surfaces, we observe a continuous change of linear and nonlinear optical (NLO) properties with the increase of the thickness of the oxide layer in the TiN/TiO₂ heterogeneous architecture. The NLO response is manifested by the strong saturable absorption with a structurally tunable negative NLO absorption coefficient. The variation in the NLO absorption coefficient by up to 7-fold can be connected to the relative change in the volume fraction of the metallic core and the dielectric shell. We demonstrate further that the optimized TiN-TiO₂ heterostructures can be used to drive an optical switch for pulse laser generation in the 1.5 μm wavelength region. Our results delineate a topochemical process for optimization of the NLO properties of common plasmonic materials for photonic applications based on simple materials chemistry.

Realizing Saturable Absorption and Reverse Saturable Absorption in a PEDOT:PSS Film via Electrical Modulation

Electrical tuning of the nonlinear absorption of materials has promising application potential, while studies remain rare. In this work, we show that the third-order nonlinear absorption of poly(3,4-ethylenedioxythiophene) chemically doped with poly(styrene sulfonic acid) [PEDOT:PSS] can be effectively modulated by external voltage. The nonlinear absorption of the film can be varied between reverse saturable absorption (RSA) and saturable absorption (SA) via voltage control with laser excitation at 800 nm, and the corresponding nonlinear absorption coefficient can be tuned in the range -1606 ± 73 to 521 ± 9 cm GW^-1. The doping level and energy structure of PEDOT are modulated with different voltages. The undoped film affords two-photon absorption and accordingly the RSA response. A moderately doped sample has two polaron levels, and Pauli blocking associated with these two polaron levels results in SA. The bipolaron level in heavily doped PEDOT leads to excited-state absorption and therefore RSA behavior. The approach reported here can be applied to other semiconductors and is a convenient, effective, and promising method for the electrical tuning of the optical nonlinearity.

Auto-controlled fabrication of a metal-porphyrin framework thin film with tunable optical limiting effects

Metal-organic frameworks (MOFs) with third-order nonlinear optical (NLO) properties are still in their infancy but are very important. In this work, we first develop a layer by layer autoarm immersion method for preparing porphyrin-based MOF (PIZA-1) thin films with third-order NLO properties. By precisely controlling the thickness, the nonlinear absorption of PIZA-1 thin films can be switched continuously between reverse saturable absorption (RSA) and saturable absorption (SA) by using the Z-scan technique. In addition, the optical limiting effect could be further optimized by loading C₆₀ in the pores of the PIZA-1 thin film. These findings not only open a new route for the exploitation of third-order NLO thin film materials, but also offer an insightful understanding of porphyrin-based MOF thin films for future broad practical applications.

Electrochemical sensor for the discrimination of bilirubin in real human blood based on Au nanoparticles/ tetrathiafulvalene -carboxylate functionalized reduced graphene oxide 0D-2D heterojunction

In clinical practice, the excess concentration of bilirubin can trigger diseases such as neonatal jaundice, hepatic failure, septicemia, and so on. The concentration of bilirubin is one of important clinical indexes to evaluate patients with hepatic function disease in clinical practice. Therefore, it is very necessary to develop a rapid detection technique detecting the bilirubin in body fluids. Here, a new electrochemical sensor based on Au nanoparticles/tetrathiafulvalene-carboxylate functionalized reduced grapheneoxide 0D-2D heterojunction(AuNPs/TTF-COOH/RGO) was fabricated for the discrimination of bilirubin in real human blood. The TTF-COOH could effectively repair electron conductivity of RGO nanosheets, decrease interface resistance, and also enhance the dispersity of TTF-COOH/RGO nanosheets in water. What's more, the S atoms of TTF-COOH can bonding the gold nano-particles (AuNPs) to fabricate a 0D-2D heterojunction with excellent biocompatibility and enhanced specific surface area. After bilirubin oxidases were self-assembled on the surface of AuNPs, a specific recognition interface was formed as a sensor for the detection of bilirubin. The heterojunction showed enhanced interface electron transfer rate, excellent biocompatibility, and also prominent electrocatalytic activity for the high efficiency catalysis of bilirubin. The sensor shows a linear response for bilirubin from 2.66 to 83  μmol L^-1 and a low detection limit of 0.74 μmol L^-1 at 3σ. This work provides one novel approach to detection of bilirubin by functional RGO nanosheets, and broadens the application area of RGO nanosheets in selective catalysis and detection of biomolecule in biological specimens, such as blood, urine.

Emerging transparent conducting oxides material: 2-dimensional plasmonic Zn doped CuGaO2 nanoplates for Q-switched fiber laser

A passively Q-switched Er³⁺ doped fiber laser has been realized by using Zn doped hexagonal CuGaO₂ (CGZO) nanoplates (NPs) as a saturable absorber (SA) for the first time. The CGZO NPs SA film exhibits strong saturable absorption property, meanwhile with a small nonsaturable loss of 5.179%, and the modulation depth is up to 40.821%. A stable passively Q-switched laser, which was centered at 1559.75 nm, was achieved, and the threshold was as low as 42 mW. With an increase of the pump power from 42mW to 361mW, the pulse duration decreases from 36 μs to 1.71 μs, and the maximum output power of 12.1 mW is achieved. Particularly, the optical-optical conversion efficiency of the Q-Switched laser based on CGZO NPs reached 3.76%. Due to whispering-gallery-mode (WGM) resonance in CGZO NPs, the nonlinear optical response of CGZO NPs has been enhancement. These findings demonstrate that CGZO NPs are promising SA for fabricating high-efficiency and low-threshold pulse lasers.

Anisotropic Plasmonic CuS Nanocrystals as a Natural Electronic Material with Hyperbolic Optical Dispersion

Copper sulfide nanocrystals have recently been studied due to their metal-like behavior and strong plasmonic response, which make them an attractive material for nanophotonic applications in the near-infrared spectral range; however, the nature of the plasmonic response remains unclear. We have performed a combined experimental and theoretical study of the optical properties of copper sulfide colloidal nanocrystals and show that bulk CuS resembles a heavily doped p-type semiconductor with a very anisotropic energy band structure. As a consequence, CuS nanoparticles possess key properties of relevance to nanophotonics applications: they exhibit anisotropic plasmonic behavior in the infrared and support optical modes with hyperbolic dispersion in the 670-1050 nm spectral range. We also predict that the ohmic loss is low compared to conventional plasmonic materials such as noble metals in the NIR. The plasmonic resonances can be tuned by controlling the size and shape of the nanocrystals, providing a playground for future nanophotonic applications in the near-infrared.

Large optical nonlinearity of ITO/Ag/ITO sandwiches based on Z-scan measurement

Indium tin oxide (ITO)-based sandwich structures with the insertion of silver (ITO/Ag/ITO) show large nonlinear optical enhancement of both nonlinear refraction and saturable absorption. Here optical nonlinearity is measured using a Z-scan experiment with a 1310 nm pulsed laser at normal incidence. The nonlinear refractive index (n₂=15.43×10^-16  m²/W) for an ITO/Ag/ITO sandwich with a 14 nm silver interlayer and the nonlinear absorption coefficient (β=-648×10^-11  m/W) for an ITO/Ag/ITO sandwich with a 10 nm silver interlayer are about 18 and 16 times greater than that of a single-layer ITO, respectively. Meanwhile, a large figure of merit and modulation depth values hinted that ITO/Ag/ITO sandwiches are promising saturable absorber materials to switch continuous laser waves into laser pulses. These novel nonlinear optical properties make ITO/Ag/ITO sandwiches a promising candidate for all-optical modulation devices at optical communication wavelengths.

Broadly Tunable Plasmons in Doped Oxide Nanoparticles for Ultrafast and Broadband Mid-Infrared All-Optical Switching

Plasmons in conducting nanostructures offer the means to efficiently manipulate light at the nanoscale with subpicosecond speed in an all-optical operation fashion, thus allowing for construction of high performance all-optical signal-processing devices. Here, by exploiting the ultrafast nonlinear optical properties of broadly tunable mid-infrared (MIR) plasmons in solution-processed, degenerately doped oxide nanoparticles, we demonstrate ultrafast all-optical switching in the MIR region, which features subpicosecond response speed (with recovery time constant of <400 fs) as well as an ultrabroadband response spectral range (covering 3.0-5.0 μm). Furthermore, with the degenerately doped nanoparticles as Q-switch, pulsed fiber lasers covering 2.0-3.5 μm were constructed, of which a watt-level fiber laser at 3.0 μm band shows superior overall performance among previously reported passively Q-switched fiber lasers at the same band. Notably, the degenerately doped nanoparticles show great potential to work in the spectral range over 3.0 μm, which is beyond the accessibility of commercially available but expensive semiconducting saturable absorber mirror (SESAM). Our work demonstrates a versatile while cost-effective material solution to ultrafast photonics in the technologically important MIR region.

Plasmonic nanoparticles embedded in single crystals synthesized by gold ion implantation for enhanced optical nonlinearity and efficient Q-switched lasing

We report on the synthesis of embedded gold (Au) nanoparticles (NPs) in Nd:YAG single crystals using ion implantation and subsequent thermal annealing. Both linear and nonlinear absorption of the Nd:YAG crystals have been enhanced significantly due to the embedded Au NPs, which is induced by the surface plasmon resonance (SPR) effect in the visible light wavelength band. Particularly, through a typical Z-scan system excited by a femtosecond laser at 515 nm within the SPR band, the nonlinear absorption coefficients of crystals with Au NPs have been observed to be nearly 5 orders of magnitude larger than that without Au NPs. This giant enhancement of nonlinear absorption properties is correlated with the saturable absorption (SA) effect, which is the basis of passive Q-switching or mode-locking for pulsed laser generation. In addition, the linear and nonlinear absorption enhancement could be tailored by varying the fluence of implanted Au⁺ ions, corresponding to the NP size and concentration modulation. Finally, the Nd:YAG wafer with embedded Au NPs has been applied as a saturable absorber in a Pr:LuLiF₄ crystal laser cavity, and efficient pulsed laser generation at 639 nm has been realized, which presents superior performance to the MoS₂ saturable absorber based system. This work opens an avenue to enhance and modulate the nonlinearities of dielectrics by embedding plasmonic Au NPs for efficient pulsed laser operation.

Localized Surface Plasmon Resonance in Semiconductor Nanocrystals

Localized surface plasmon resonance (LSPR) in semiconductor nanocrystals (NCs) that results in resonant absorption, scattering, and near field enhancement around the NC can be tuned across a wide optical spectral range from visible to far-infrared by synthetically varying doping level, and post synthetically via chemical oxidation and reduction, photochemical control, and electrochemical control. In this review, we will discuss the fundamental electromagnetic dynamics governing light matter interaction in plasmonic semiconductor NCs and the realization of various distinctive physical properties made possible by the advancement of colloidal synthesis routes to such NCs. Here, we will illustrate how free carrier dielectric properties are induced in various semiconductor materials including metal oxides, metal chalcogenides, metal nitrides, silicon, and other materials. We will highlight the applicability and limitations of the Drude model as applied to semiconductors considering the complex band structures and crystal structures that predominate and quantum effects that emerge at nonclassical sizes. We will also emphasize the impact of dopant hybridization with bands of the host lattice as well as the interplay of shape and crystal structure in determining the LSPR characteristics of semiconductor NCs. To illustrate the discussion regarding both physical and synthetic aspects of LSPR-active NCs, we will focus on metal oxides with substantial consideration also of copper chalcogenide NCs, with select examples drawn from the literature on other doped semiconductor materials. Furthermore, we will discuss the promise that LSPR in doped semiconductor NCs holds for a wide range of applications such as infrared spectroscopy, energy-saving technologies like smart windows and waste heat management, biomedical applications including therapy and imaging, and optical applications like two photon upconversion, enhanced luminesence, and infrared metasurfaces.

Active Manipulation of NIR Plasmonics: the Case of Cu2-xSe through Electrochemistry

Active control of nanocrystal optical and electrical properties is crucial for many of their applications. By electrochemical (de)lithiation of Cu_2-xSe, a highly doped semiconductor, dynamic and reversible manipulation of its NIR plasmonics has been achieved. Spectroelectrochemistry results show that NIR plasmon red-shifted and reduced in intensity during lithiation, which can be reversed with perfect on-off switching over 100 cycles. Electrochemical impedance spectroscopy reveals that a Faradaic redox process during Cu_2-xSe (de)lithiation is responsible for the optical modulation, rather than simple capacitive charging. XPS analysis identifies a reversible change in the redox state of selenide anion but not copper cation, consistent with DFT calculations. Our findings open up new possibilities for dynamical manipulation of vacancy-induced surface plasmon resonances and have important implications for their use in NIR optical switching and functional circuits.

A Solution-Processed Ultrafast Optical Switch Based on a Nanostructured Epsilon-Near-Zero Medium

All the optical properties of materials are derived from dielectric function. In spectral region where the dielectric permittivity approaches zero, known as epsilon-near-zero (ENZ) region, the propagating light within the material attains a very high phase velocity, and meanwhile the material exhibits strong optical nonlinearity. The interplay between the linear and nonlinear optical response in these materials thus offers unprecedented pathways for all-optical control and device design. Here the authors demonstrate ultrafast all-optical modulation based on a typical ENZ material of indium tin oxide (ITO) nanocrystals (NCs), accessed by a wet-chemistry route. In the ENZ region, the authors find that the optical response in these ITO NCs is associated with a strong nonlinear character, exhibiting sub-picosecond response time (corresponding to frequencies over 2 THz) and modulation depth up to ≈160%. This large optical nonlinearity benefits from the highly confined geometry in addition to the ENZ enhancement effect of the ITO NCs. Based on these ENZ NCs, the authors successfully demonstrate a fiber optical switch that allows switching of continuous laser wave into femtosecond laser pulses. Combined with facile processibility and tunable optical properties, these solution-processed ENZ NCs may offer a scalable and printable material solution for dynamic photonic and optoelectronic devices.

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Emerging Low-Dimensional Materials for Nonlinear Optics and Ultrafast Photonics

Low-dimensional (LD) materials demonstrate intriguing optical properties, which lead to applications in diverse fields, such as photonics, biomedicine and energy. Due to modulation of electronic structure by the reduced structural dimensionality, LD versions of metal, semiconductor and topological insulators (TIs) at the same time bear distinct nonlinear optical (NLO) properties as compared with their bulk counterparts. Their interaction with short pulse laser excitation exhibits a strong nonlinear character manifested by NLO absorption, giving rise to optical limiting or saturated absorption associated with excited state absorption and Pauli blocking in different materials. In particular, the saturable absorption of these emerging LD materials including two-dimensional semiconductors as well as colloidal TI nanoparticles has recently been utilized for Q-switching and mode-locking ultra-short pulse generation across the visible, near infrared and middle infrared wavelength regions. Beside the large operation bandwidth, these ultrafast photonics applications are especially benefit from the high recovery rate as well as the facile processibility of these LD materials. The prominent NLO response of these LD materials have also provided new avenues for the development of novel NLO and photonics devices for all-optical control as well as optical circuits beyond ultrafast lasers.

Metal ion binding by laterally non-symmetric macrobicyclic oxa–aza cryptands

Laterally non-symmetric oxa–aza cryptands are versatile supramolecular synthons.