NiO/CoN Porous Nanowires as Efficient Bifunctional Catalysts for Zn-Air Batteries

Built-in electric field in NiO-CuO heterostructures to regulate the hydroxide adsorption sites for 5-hydroxymethylfurfural electrooxidation assisted hydrogen production

The development of catalysts with suitable adsorption behavior for the reaction molecules and the elucidation of their internal structure-adsorption-catalytic activity relationships are crucial for the electrooxidation of 5-hydroxymethylfurfural (HMF). In this work, NiO-CuO heterostructures with a spontaneous built-in electric field (BEF) are specifically designed and used to regulate the OH- adsorption site for freeing up the active site of HMF for the HMF oxidation reaction (HMFOR). The mechanism driving electron pumping/accumulation of the BEF is examined by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Electrochemical data and theoretical calculations show that BEF modulates the adsorption energy and adsorption site of substrate molecules, thereby enhancing the performance of HMFOR and hydrogen evolution reaction (HER). Notably, the NiO-CuO electrode demonstrates high 2,5-Furandicarboxylic acid (FDCA) selectivity (99.76 %) and generation rate (13.79 mmol gcat-1 h-1). It only requires 1.33 V to obtain a current density of 10 mA cm-2 for HMFOR-coupled H2 evolution. This research introduces a novel approach by regulating the adsorption of reactive molecules for HMFOR-assisted H2 evolution.

Catalyst-Support Interaction in Polyaniline-Supported Ni3Fe Oxide to Boost Oxygen Evolution Activities for Rechargeable Zn-Air Batteries

Catalyst-support interaction plays a crucial role in improving the catalytic activity of oxygen evolution reaction (OER). Here we modulate the catalyst-support interaction in polyaniline-supported Ni3Fe oxide (Ni3Fe oxide/PANI) with a robust hetero-interface, which significantly improves oxygen evolution activities with an overpotential of 270 mV at 10 mA cm-2 and specific activity of 2.08 mA cmECSA-2 at overpotential of 300 mV, 3.84-fold that of Ni3Fe oxide. It is revealed that the catalyst-support interaction between Ni3Fe oxide and PANI support enhances the Ni-O covalency via the interfacial Ni-N bond, thus promoting the charge and mass transfer on Ni3Fe oxide. Considering the excellent activity and stability, rechargeable Zn-air batteries with optimum Ni3Fe oxide/PANI are assembled, delivering a low charge voltage of 1.95 V to cycle for 400 h at 10 mA cm-2. The regulation of the effect of catalyst-support interaction on catalytic activity provides new possibilities for the future design of highly efficient OER catalysts.

Efficient and durable oxygen reduction in alkaline media by doping heteroatomic boron into FeSA-NC catalyst

Despite extensive research has been conducted on atomic dispersion catalysts for various reactions, altering the electronic structure of the central metal to enhance electrochemical reactivity remains a challenging task. Herein, the electrochemical reactivity was considerably enhanced by introducing heteroatomic B to adjust the d-band of single Fe center. In specific, the obtained FeSA-BNC catalyst demonstrated an outstanding ORR performance (E1/2 = 0.87 V) and exhibited greater long-term durability in alkaline media compared to Pt/C. The performance of FeSA-BNC in Zn-air battery was also higher than that of Pt/C. According to theoretical calculations, a downward shift in the d-band center of Fe was induced by introducing B, thereby improving the desorption of intermediates and facilitating the oxygen reduction reaction (ORR).

Powering the Future by Iron Sulfide Type Material (FexSy) Based Electrochemical Materials for Water Splitting and Energy Storage Applications: A Review

Water electrolysis is among the recent alternatives for generating clean fuels (hydrogen). It is an efficient way to produce pure hydrogen at a rapid pace with no unwanted by-products. Effective and cheap water-splitting electrocatalysts with enhanced activity, specificity, and stability are currently widely studied. In this regard, noble metal-free transition metal-based catalysts are of high interest. Iron sulfide (FeS) is one of the essential electrocatalysts for water splitting because of its unique structural and electrochemical features. This article discusses the significance of FeS and its nanocomposites as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and overall water splitting. FeS and its nanocomposites have been studied also for energy storage in the form of electrode materials in supercapacitors and lithium- (LIBs) and sodium-ion batteries (SIBs). The structural and electrochemical characteristics of FeS and its nanocomposites, as well as the synthesis processes, are discussed in this work. This discussion correlates these features with the requirements for electrocatalysts in overall water splitting and its associated reactions. As a result, this study provides a road map for researchers seeking economically viable, environmentally friendly, and efficient electrochemical materials in the fields of green energy production and storage.

The effects of oxygen flow ratio on the properties of Ag x O thin films grown by radio frequency magnetron sputtering

The Ag x O thin film with various oxygen flow ratios (R[O2]%) deposited by radio frequency magnetron sputtering (RFM-SPT) has been studied. While adjusting R[O2]% from 0% to 30%, the Ag x O thin film transitioned from metal to semiconductor and/or insulator with different transparent appearances on the surface observed using X-ray diffraction (XRD) and transmittance measurement. At high oxygen flow ratios, the Ag x O film is multi-phased as a mixture of Ag(II)O and Ag2 (III)O3. In addition, the work function (ϕ) of those samples changes from 4.7 eV to 5.6 eV as measured by photoelectron yield spectroscopy (PYS). The compositional and chemical state changes that occur at the Ag x O surface during the increments of R[O2]% are evaluated by the relative peak intensities and binding energy shifts in X-ray photoelectron spectroscopy (XPS). With the incorporation of more electrons in chemical bonding, the oxygen-induced band forms. And combining all the results from transmittance (band gap confirmation), PYS (work function confirmation), and XPS (valence band position confirmation), the estimated band diagrams are given for the oxidation state of Ag x O with various oxygen flow ratios.

Graphdiyne-Induced CoN/CoS2 Heterojunction: Boosting Efficiency for Bifunctional Oxygen Electrochemistry in Zinc-Air Batteries

The performance of zinc-air battery is constrained by the sluggish rate of oxygen electrode reaction, particularly under high current discharge conditions where the kinetic process of the oxygen reduction reaction (ORR) decelerates significantly. To address this challenge, we present a novel phase transition strategy that facilitates the creation of a heteroatom-doped heterointerface (CoN/CoS2). The meticulously engineered CoN/CoS2/NC electrocatalyst displays a superior ORR half-wave potential of 0.87 V and an OER overpotential of 320 mV at 10 mA cm-2. Experimental and computational analysis confirm that the CoN/CoS2 heterostructure optimizes local charge distribution, accelerates electron transfer, and tunes active sites for enhanced catalysis. Notably, this heterojunction improves stability by resisting corrosion and degradation under harsh alkaline conditions, thus demonstrating superior performance and longevity in a custom-made liquid zinc-air battery. This research provides valuable practical and theoretical foundations for designing efficient heterointerfaces in electrocatalysis applications.

Selenium-enriched hollow NiCo2O4/NiO heterostructured nanocages as an efficient electrocatalyst for oxygen evolution reaction

Finding clean, sustainable, and environmentally friendly technologies is especially crucial in addressing both energy and environmental challenges. To accelerate the oxygen evolution reaction (OER) and to overcome the obstacle of high energy consumption, exploring high-performance electrocatalysts is imperative to maximize the practical applicability of water splitting. Developing electrocatalyst through strategic surface modifications represents a significant approach for the construction of active catalytic centers. In the present work, we successfully synthesized selenium-incorporated hollow NiCo2O4/NiO heterostructured nanocages as electrocatalysts for the OER by precisely controlling the structure and composition of the material. The findings demonstrated that the surface-reconstructed hollow 5 wt% Se-NiCo2O4/NiO heterostructured nanocages resulted in an increased number of active sites through interfacial engineering. Benefiting from the structural control, mass transport was further expedited and due to increased conductivity, accelerated the charge transfer processes within the system. The electrocatalyst exhibited remarkable activity for the OER and displayed a low overpotential (η = 288 mV) at a current density (j) of 10 mA cm-2, small Tafel slope (66.7 mV dec-1) and better stability. This work offers a viable and adaptable method for fabricating a range of functional coordinated MOF compounds that are capable of utilization across diverse energy applications, including storage, conversion and environmental purposes.

Recent Advances in Catalyst Design and Performance Optimization of Nanostructured Cathode Materials in Zinc-Air Batteries

This review focuses on the advanced design and optimization of nanostructured zinc-air batteries (ZABs), with the aim of boosting their energy storage and conversion capabilities. The findings show that ZABs favor porous nanostructures owing to their large surface area, and this enhances the battery capacity, catalytic activity, and life cycle. In addition, the nanomaterials improve the electrical conductivity, ion transport, and overall battery stability, which crucially reduces dendrite growth on the zinc anodes and improves cycle life and energy efficiency. To obtain a superior performance, the importance of controlling the operational conditions and using custom nanostructural designs, optimal electrode materials, and carefully adjusted electrolytes is highlighted. In conclusion, porous nanostructures and nanoscale materials significantly boost the energy density, longevity, and efficiency of Zn-air batteries. It is suggested that future research should focus on the fundamental design principles of these materials to further enhance the battery performance and drive sustainable energy solutions.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Stabilizing Lattice Oxygen through Mn Doping in NiCo2O4-δ Spinel Electrocatalysts for Efficient and Durable Acid Oxygen Evolution

Design the electrocatalysts without noble metal is still a challenge for oxygen evolution reaction (OER) in acid media. Herein, we reported the manganese (Mn) doping method to decrease the concentration of oxygen vacancy (VO) and form the Mn-O structure adjacent octahedral sites in spinel NiCo2O4-δ (NiMn1.5Co3O4-δ), which highly enhanced the activity and stability of spinel NiCo2O4-δ with a low overpotential (η) of 280 mV at j=10 mA cm-2 and long-term stability of 80 h in acid media. The isotopic labelling experiment based on differential electrochemical mass spectrometry (DEMS) clearly demonstrated the lattice oxygen in NiMn1.5Co3O4-δ is more stable due to strong Mn-O bond and shows synergetic adsorbate evolution mechanism (SAEM) for acid OER. Density functional theory (DFT) calculations reveal highly increased oxygen vacancy formation energy (EVO) of NiCo2O4-δ after Mn doping. More importantly, the highly hydrogen bonding between Mn-O and *OOH adsorbed on adjacent Co octahedral sites promote the formation of *OO from *OOH due to the greatly enhanced charge density of O in Mn substituted sites.

Synergistic oxidation of humic acid treated by H2O2/O3 activated by CuCo/C with high efficiency and wide pH range

Combination of oxidation processes are one of the most promising humic acid treatment technologies. Single oxidant or even two oxidants in advance oxidation process can hardly achieve satisfactory removal efficiency of refractory organic matter, mainly humic acid, in the treatment process of reverse osmosis concentrates from landfill leachate. To solve this problem, this study investigated the synergistic degradation of Humic acid (HA) using a Cu and Co supported on carbon catalyst (CuCo/C) in a Hydrogen peroxide (H2O2) with ozone (O3) system. The catalyst was characterized by performing SEM, XRD, BET, XPS and FTIR technologies. UV-vis spectra, 3D Excitation Emission Matrix Spectra (3D-EEM) and gas chromatography-mass spectrometry (GC-MS) were applied for exploring degradation mechanism of HA. To further understand the oxidation mechanism, electron paramagnetic resonance (EPR) was used to evaluate the generation of hydroxyl (·OH) and superoxide radicals (O2·-). As a result, CuCo/C catalyst possessed stable catalytic performance for HA degradation with a wide pH range from 5 to 8, while T = 40 °C，catalyst dosage of 2.4 g/L，O3 intake rate of 0.15 g/min and H2O2 dosage of 1.92 mL/L, the degradation rate of total organic carbon (TOC) achieved 40-46.5 mg·L-1min-1. As affirmed by the EPR, ·OH and O2·- were effectively generated with addition of the CuCo/C catalyst. Degradation performance of UV254 proved that the catalytic activity can still be maintained above 95% with removal rate of 82% after 5 cycles reuse. GC-MS shows that the oxidation products mainly consist of amide, benzoheterocyclic ring and carboxylic acid. This work promotes an effective method for degrading HA, which has the potential for satisfactory application in landfill leachate.

Sulfur-Induced Electronic Optimization of N-Doped Carbon with CoP/Co2P Heterostructure by Precursor Design for Rechargeable Zinc-Air Batteries

Heteroatom doping and heterostructure construction are the key methods to improve the performance of electrocatalysts. However, developing such catalysts remains a challenging task. Herein, we designed two comparable polymers, phytic acid/thiourea polymer (PATP) and phytic acid/urea polymer (PAUP), as precursors, which contain C, N, S/O, and P by microwave heating. To pinpoint how the introduction of sulfur would affect the electronic structure and catalytic activity, these two polymers were physically blended with CoCo-Prussian blue analogue (CoCo-PBA) and further calcination, respectively. The highly dispersed CoP/Co2P-rich interfacial catalysts anchored on the N,S-codoped or N-doped carbon support were successfully prepared (CoP/Co2P@CNS and CoP/Co2P@CN). The prepared CoP/Co2P@CNS catalyst showed good ORR properties (E1/2 = 0.856 V vs RHE) and OER properties (Ej10 = 1.54 V vs RHE), which were superior to the commercial Pt/C and RuO2 catalysts. The reversible oxygen electrode index (ΔE = Ej10 - E1/2) can reach ∼0.684 V. Meanwhile, the rechargeable zinc-air battery assembled with a CoP/Co2P@CNS catalyst as the air cathode also showed excellent performance, with a charge-discharge cycle stability of up to 900 h. DFT calculations further confirm that the introduction of S atoms can affect the electronic structure and enhance the catalytic activity of C and N atoms on carbon support.

Modulation of Phase Transition in Cobalt Selenide with Simultaneous Construction of Heterojunctions for Highly-Efficient Oxygen Electrocatalysis in Zinc-Air Battery

Phase transformation of cobalt selenide (CoSe2 ) can effectively modulate its intrinsic electrocatalytic activity. However, enhancing electroconductivity and catalytic activity/stability of CoSe2 still remains challenging. Heterostructure engineering may be feasible to optimize interfacial properties to promote the kinetics of oxygen electrocatalysis on a CoSe2 -based catalyst. Herein, a heterostructure consisting of CoSe2 and cobalt nitride (CoN) embedded in a hollow carbon cage is designed via a simultaneous phase/interface engineering strategy. Notably, the phase transition of orthorhombic-CoSe2 to cubic-CoSe2 (c-CoSe2 ) accompanied by in situ CoN formation is realized to build the c-CoSe2 /CoN heterointerface, which exhibits excellent/highly stable activities for oxygen reduction/evolution reactions (ORR/OER). Notably, heterostructure can modulate the local coordination environment and increase Co-Se/N bond lengths. Theoretical calculations show that Co-site (c-CoSe2 ) with an electronic state near Fermi energy level is the main active site for ORR/OER.Energetical tailoring of the d-orbital electronic structure of the Co atom of c-CoSe2 in heterostructure by in situ CoN incorporation lowers thermodynamic barriers for ORR/OER. Attractively, a zinc-air battery with a c-CoSe2 -CoN cathode displays excellent cycling stability (250 h) and charge/discharge voltage loss (0.953/0.96 V). It highlights that heterointerface engineering provides an option for modulating the bifunctional activity of metal selenides with controlled phase transformation.

Nitriding-reduction fabrication of coralloid CoN/Ni/NiO for efficient electrocatalytic overall water splitting

The introduction of nitride in Ni/NiO-based catalytic system for electrocatalystic water splitting via a skillful strategy remains a great challenge. Herein, we proposed a one-step urea nitriding-reduction strategy for the fabrication of novel CoN/Ni/NiO electrocatalyst on carbon cloth (CC). The combination of CoN and Ni/NiO could construct CoN/Ni interface and expose more active sites, thus exhibiting excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance in alkaline media. Consequently, CoN/Ni/NiO catalyst exhibited remarkable HER/OER performance with an overpotential of 92 mV/114 mV at 10 mA cm-2 in 1.0 M KOH, along with a low cell voltage of 1.56 V to enhance overall water splitting. In addition, when CoN was introduced in Ni/NiO system, CoN/Ni/NiO displayed high conductivity, large active surface areas, high Faradic efficiency (FE) and remarkable stability. Density functional theory (DFT) calculations demonstrated that CoN/Ni/NiO possessed a decreased d-band center beneficial for optimizing the energy barrier of intermediates. Specifically, the ΔGH2O (0.088 eV) and ΔGH* (0.18 eV) in HER and the ΔGOOH* (1.4 eV) of rate determining step (O*→OOH*) in OER of CoN/Ni/NiO catalyst were optimized to achieve high water splitting activity. Simultaneously, for adsorbed H2O on CoN/Ni/NiO, the OH bond length extended from 0.975 to 1.110 Å, and the bond angle enlarged from 104.271 to 109.471°, thereby directly demonstrating the excellent HER/OER performance of CoN/Ni/NiO.

Curvature effects regulate the catalytic activity of Co@N4-doped carbon nanotubes as bifunctional ORR/OER catalysts

The advancement of metal-air batteries relies significantly on the development of highly efficient bifunctional catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, we investigate the potential application of Co@N4-doped carbon nanotubes (Co@N4CNTs) as bifunctional catalysts using density functional theory calculations. We explore the stability and electronic properties of Co@N4CNTs by analyzing energies, bond lengths, conducting ab initio molecular dynamics simulations, and examining the density of states. Notably, the diameter of the nanotubes has a notable impact on the catalytic performance of Co@N4CNTs. A remarkable 54% improvement in catalytic activity when transitioning from (4, 4) to (24, 4) Co@N4CNTs, with ηBi from changing from 1.40 to 0.64 V. We have several exceptional catalysts with low overpotentials, including (18, 4), (22, 4), and (24, 4) Co@N4CNTs, which exhibit ηBi values of 0.68, 0.67, and 0.64 V, respectively. Moreover, we link the increased activity of Co@N4CNTs to the change of Co atom's partial d orbital energy, facilitated by adjustments in the diameter of Co@N4CNTs. This revelation offers valuable insights into the underlying factors driving the enhancement of catalytic activity through alterations in orbital energy levels. Our research uncovers several excellent catalysts and provides valuable insights for the design and development of efficient catalysts for metal-air batteries.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

A macroporous carbon nanoframe for hosting Mott-Schottky Fe-Co/Mo2C sites as an outstanding bi-functional oxygen electrocatalyst

Simultaneously optimizing the d-band center of the catalyst and the mass/charge transport processes during the oxygen catalytic reaction is an essential but arduous task in the pursuit of creating effective and long-lasting bifunctional oxygen catalysts. In this study, a Fe-Co/Mo2C@N-doped carbon macroporous nanoframe was successfully synthesized via a facile "conformal coating and coordination capture" pyrolysis strategy. As expected, the resulting heterogeneous electrocatalyst exhibited excellent reversible oxygen electrocatalytic performance in an alkaline medium, as demonstrated by the small potential gap of 0.635 V between the operating potential of 1.507 V at 10 mA cm-2 for the oxygen evolution reaction and the half-wave potential of 0.872 V towards the oxygen reduction reaction. Additionally, the developed Zn-air battery employing the macroporous nanoframe heterostructure displayed an impressive peak power density of 218 mW cm-2, a noteworthy specific capacity of 694 mA h gZn-1, and remarkable charging/discharging cycle durability. Theoretical calculations confirmed that the built-in electric field between the Fe-Co alloy and Mo2C semiconductor could induce advantageous charge transport and redistribution at the heterointerface, contributing to the optimization of the d-band center of the nanohybrid and ultimately leading to a reduction in the reaction energy barrier during catalytic processes. The exquisite macroporous nanoframe facilitated the rapid transport of ions and charges, as well as the smooth access of oxygen to the internal active site. Thus, the presented unique electronic structure regulation and macroporous structure design show promising potential for the development of robust bifunctional oxygen electrodes.

Surfactant regulated Core-Double-Shell NF@NiO nanosheets matrix as integrated anodes for Lithium-Ion batteries

The direct oxidation of three-dimensional nickel foam (3D NF) to nickel oxide (NiO) as integrated anode material for lithium-ion batteries (LIBs) has attracted significant attention towards achieving high-areal-capacity and high-energy density LIBs. However, the rate capability of such monolithic NiO in LIBs usually falls off rapidly due to the poor electrical conductivity that hindered its ionic transport kinetics. Herein, to ease the ionic transport constrains, a surfactant-regulated strategy is developed for preparing in-situ core-double-shell architecture that consists of core nickel skeleton, dense nickel oxide shell and porous nickel oxide nanosheets (NS) shell as anode materials for LIBs. Among the three employed surfactants including cationic surfactant, anionic surfactant and nonionic surfactant, the anionic surfactant (sodium dodecyl sulfate, SDS) modulated anode denoted SDS-NF@NiONS exhibits ultrahigh reversible areal capacity of 8.64 mAh cm-2@ 0.4 mA cm-2, and excellent rate areal capacity of 5.20 mAh cm-2 @ 3.0 mA cm-2, which did not only show the best ever reported NiO-based high-areal-capacity based electrodes, but also demonstrate impressive performance in practical full cell LIBs. In addition, in-situ Raman and kinetic analyses confirm the mechanism of Li-ion storage and facile ionic transport kinetics in this proposed design.

Single-atom Zn with nitrogen defects on biomimetic 3D carbon nanotubes for bifunctional oxygen electrocatalysis

Single atoms catalysts (SACs) have promising development in electrocatalytic energy conversion. Nevertheless, rational design SACs with reversible oxygen electrocatalysis still remain challenge. Herein, we synthesized atomically dispersed Zn with N defect on three-dimensional (3D) biomimetic carbon nanotubes by secondary pyrolysis (Zn-N-C-2), which possesses excellent oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional catalytic activities. The biomimetic 3D structure and unique "leaf-branch" system are beneficial to fully expose the active sites. Density functional theory (DFT) calculations show that Zn-N3-D can optimize the charge distribution and facilitate electron transfer step of OH*→O*. Zn-N-C-2 exhibits higher ORR activity than commercial Pt/C with a half-wave potential (E1/2) of 0.85 V and OER overpotential of 450 mV at 10 mA cm-2. After being assembled into the air cathode of aqueous Zn-air battery (ZAB), it demonstrates superior performances with long-term charge and discharge for more than 200 h. This work not only clarifies the controlled synthesis of N-defects Zn SACs with excellent bifunctional electrocatalyst, but also provide in-depth understanding of structural-performance relationships by regulating local microenvironments.

Construction of Co/FeCo@Fe(Co)3O4 heterojunction rich in oxygen vacancies derived from metal-organic frameworks using O2 plasma as a high-performance bifunctional catalyst for rechargeable zinc-air batteries

Developing high-efficient, good-durability, and low-cost bifunctional non-precious metal catalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is urgent and significant for promoting the practical rechargeable zinc-air batteries (RZABs). Herein, N-doped carbon coated Co/FeCo@Fe(Co)3O4 heterojunction rich in oxygen vacancies derived from metal-organic frameworks (MOFs) is successfully constructed by O2 plasma treatment. The phase transition of Co/FeCo to FeCo oxide (Fe3O4/Co3O4) mainly occurs on the surface of nanoparticles (NPs) during the O2 plasma treatment, which can form rich oxygen vacancies simultaneously. The fabricated catalyst P-Co3Fe1/NC-700-10 with optimal O2 plasma treatment time of 10 min can reduce the potential gap between the OER and ORR to 760 mV, which is much lower than commercial 20% Pt/C + RuO2 (910 mV). Density functional theory (DFT) calculation indicates that the synergistic coupling between Co/FeCo alloy NPs and FeCo oxide layer can promote the ORR/OER performance. Both liquid electrolyte RZAB and flexible all-solid-state RZAB using P-Co3Fe1/NC-700-10 as the air-cathode catalyst display high power density, specific capacity and excellent stability. This work provides an effective idea for the development of high performance bifunctional electrocatalyst and the application of RZABs.

Spontaneous Internal Electric Field in Heterojunction Boosts Bifunctional Oxygen Electrocatalysts for Zinc-Air Batteries: Theory, Experiment, and Application

Heterojunctions are a promising class of materials for high-efficiency bifunctional oxygen electrocatalysts in both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, the conventional theories fail to explain why many catalysts behave differently in ORR and OER, despite a reversible path (* O2 ⇋* OOH⇋* O⇋* OH). This study proposes the electron-/hole-rich catalytic center theory (e/h-CCT) to supplement the existing theories, it suggests that the Fermi level of catalysts determines the direction of electron transfer, which affects the direction of the oxidation/reduction reaction, and the density of states (DOS) near the Fermi level determines the accessibility for injecting electrons and holes. Additionally, heterojunctions with different Fermi levels form electron-/hole-rich catalytic centers near the Fermi levels to promote ORR/OER, respectively. To verify the universality of the e/h-CCT theory, this study reveals the randomly synthesized heterostructural Fe3 N-FeN0.0324 (Fex N@PC with DFT calculations and electrochemical tests. The results show that the heterostructural F3 N-FeN0.0324 facilitates the catalytic activities for ORR and OER simultaneously by forming an internal electron-/hole-rich interface. The rechargeable ZABs with Fex N@PC cathode display a high open circuit potential of 1.504 V, high power density of 223.67 mW cm-2 , high specific capacity of 766.20 mAh g-1 at 5 mA cm-2 , and excellent stability for over 300 h.

Sustainable zinc-air battery chemistry: advances, challenges and prospects

Sustainable zinc-air batteries (ZABs) are considered promising energy storage devices owing to their inherent safety, high energy density, wide operating temperature window, environmental friendliness, etc., showing great prospect for future large-scale applications. Thus, tremendous efforts have been devoted to addressing the critical challenges associated with sustainable ZABs, aiming to significantly improve their energy efficiency and prolong their operation lifespan. The growing interest in sustainable ZABs requires in-depth research on oxygen electrocatalysts, electrolytes, and Zn anodes, which have not been systematically reviewed to date. In this review, the fundamentals of ZABs, oxygen electrocatalysts for air cathodes, physicochemical properties of ZAB electrolytes, and issues and strategies for the stabilization of Zn anodes are systematically summarized from the perspective of fundamental characteristics and design principles. Meanwhile, significant advances in the in situ/operando characterization of ZABs are highlighted to provide insights into the reaction mechanism and dynamic evolution of the electrolyte|electrode interface. Finally, several critical thoughts and perspectives are provided regarding the challenges and opportunities for sustainable ZABs. Therefore, this review provides a thorough understanding of the advanced sustainable ZAB chemistry, hoping that this timely and comprehensive review can shed light on the upcoming research horizons of this prosperous area.

Interface engineering of the NiO/CeO2@NF heterostructure to boost the electro-oxidation of 5-hydroxymethylfurfural

The synthesis of furan-based platform chemicals from abundant and renewable biomass-based hexoses plays an important role in the development and utilization of biomass energy. The electrochemical 5-hydroxymethylfurfural oxidation reaction (HMFOR) represents a promising route for synthesizing the 2,5-furandicarboxylic acid (FDCA) product which is a high value-added biomass-based monomer. Interface engineering is an effective strategy to adjust the electronic structure, optimize the adsorption of intermediates, and expose more active sites, thus attracting extensive attention for designing efficient HMFOR electrocatalysts. Herein, a NiO/CeO₂@NF heterostructure with an abundant interface is designed for boosting the HMFOR performance under alkaline conditions. At 1.475 V vs. RHE, the conversion of HMF is nearly 100%, the selectivity of FDCA is 99.0%, and the faradaic efficiency is as high as 98.96%. The NiO/CeO₂@NF electrocatalyst also exhibits robust stability for HMFOR for 10 cycles. When coupled with the cathode hydrogen evolution reaction (HER) in alkaline medium, the yields of FDCA and hydrogen production are 197.92 and 600 μmol cm^-2 h^-1, respectively. The NiO/CeO₂@NF catalyst is also suitable for the electrocatalytic oxidation of other biomass-derived platform compounds. The abundant interface between NiO and CeO₂, which can regulate the electronic properties of Ce and Ni atoms, improve the oxidation state of Ni species, regulate intermediate adsorption, and promote electron/charge transfer, makes the most contribution to high HMFOR performance. This work will provide a simple route for the design of heterostructured materials and reveal the application prospect of interface engineering for promoting the upgrading of biomass derivatives.

CoNi Alloys Encapsulated in N-Doped Carbon Nanotubes for Stabilizing Oxygen Electrocatalysis in Zinc-Air Battery

Alloy-based catalysts with high corrosion resistance and less self-aggregation are essential for oxygen reduction/evolution reactions (ORR/OER). Here, via an in situ growth strategy, NiCo alloy-inserted nitrogen-doped carbon nanotubes were assembled on a three-dimensional hollow nanosphere (NiCo@NCNTs/HN) using dicyandiamide. NiCo@NCNTs/HN exhibited better ORR activity (half-wave potential (E_1/2) of 0.87 V) and stability (E_1/2 shift of only -13 mV after 5000 cycles) than commercial Pt/C. NiCo@NCNTs/HN displayed a lower OER overpotential (330 mV) than RuO₂ (390 mV). The NiCo@NCNTs/HN-assembled zinc-air battery exhibited high specific-capacity (847.01 mA h g^-1) and cycling-stability (291 h). Synergies between NiCo alloys and NCNTs facilitated the charge transfer to promote 4e^- ORR/OER kinetics. The carbon skeleton inhibited the corrosion of NiCo alloys from surface to subsurface, while inner cavities of CNTs confined particle growth and the aggregation of NiCo alloys to stabilize bifunctional activity. This provides a viable strategy for the design of alloy-based catalysts with confined grain-size and good structural/catalytic stabilities in oxygen electrocatalysis.

Nitrogen-doped porous carbon encapsulates multivalent cobalt-nickel as oxygen reduction reaction catalyst for zinc-air battery

In this study, we present a bimetallic ion coexistence encapsulation strategy employing hexadecyl trimethyl ammonium bromide (CTAB) as a mediator to anchor cobalt-nickel (CoNi) bimetals in nitrogen-doped porous carbon cubic nanoboxes (CoNi@NC). The fully encapsulated and uniformly dispersed CoNi nanoparticles with the improved density of active sites help to accelerate the oxygen reduction reaction (ORR) kinetics and provide an efficient charge/mass transport environment. Zinc-air battery (ZAB) equipped CoNi@NC as cathode exhibits an open-circuit voltage of 1.45 V, a specific capacity of 870.0 mAh g^-1, and a power density of 168.8 mW cm^-2. Moreover, the two CoNi@NC-based ZABs in series display a stable discharge specific capacity of 783.0 mAh g^-1, as well as a large peak power density of 387.9 mW cm^-2. This work provides an effective way to tune the dispersion of nanoparticles to boost active sites in nitrogen-doped carbon structure, and enhance the ORR activity of bimetallic catalysts.

Tuning coordination microenvironment of V2CTx MXene for anchoring single-atom toward efficient multifunctional electrocatalysis

The rational design of low-cost and high-performance multifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution/reduction reaction (OER/ORR) is essential for efficient overall water splitting and rechargeable metal-air battery. Herein, through density functional theory calculations, we creatively regulate the coordination microenvironment of V₂CT_x MXene (M-v-V₂CT₂, T = O, Cl, F and S) as substrates of single-atom catalysts (SACs), and then systematically explore their HER, OER, and ORR electrocatalytic performance. Our results disclose that Rh-v-V₂CO₂ is a promising bifunctional catalyst for water splitting (overpotentials of 0.19 and 0.37 V for HER and OER). Besides, Pt-v-V₂CCl₂ and Pt-v-V₂CS₂ possess desirable bifunctional OER/ORR activity with overpotentials of 0.49/0.55 V and 0.58/0.40 V, respectively. More interestingly, Pt-v-V₂CO₂ is a promising trifunctional catalyst under vacuum, implicit and explicit solvation conditions, which transcends commercially used Pt and IrO₂ catalysts for HER/ORR and OER. The electronic structure analysis further demonstrates that surface functionalization can optimize the local microenvironment of the SACs and thus tune the interaction strength of intermediate adsorbates. This work provides a feasible strategy for developing advanced multifunctional electrocatalysts and enriches the application of MXene in energy conversion and storage.

Highly Oxidized Oxide Surface toward Optimum Oxygen Evolution Reaction by Termination Engineering

The oxygen evolution reaction (OER) is a critical step for sustainable fuel production through electrochemistry process. Maximizing active sites of nanocatalyst with enhanced intrinsic activity, especially the activation of lattice oxygen, is gradually recognized as the primary incentive. Since the surface reconfiguration to oxyhydroxide is unavoidable for oxygen-activated transition metal oxides, developing a surface termination like oxyhydroxide in oxides is highly desirable. In this work, we demonstrate an unusual surface termination of (111)-facet Co₃O₄ nanosheet that is exclusively containing edge-sharing octahedral Co³⁺ similar to CoOOH that can perform at approximately 40 times higher current density at 1.63 V (vs RHE) than commercial RuO₂. It is found that this surface termination has an oxidized oxygen state in contrast to standard Co-O systems, which can serve as active site independently, breaking the scaling relationship limit. This work forwards the applications of oxide electrocatalysts in the energy conversion field by surface termination engineering.

Atomically Dispersed Fe-N4 Sites and NiFe-LDH Sub-Nanoclusters as an Excellent Air Cathode for Rechargeable Zinc-Air Batteries

The sluggish four-electron processes of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) limit the development of rechargeable Zn-air batteries (RZABs). Highly efficient ORR/OER bifunctional electrocatalysts are therefore highly desired for the commercialization of RZABs in large scale. Herein, the Fe-N₄-C (ORR active sites) and NiFe-LDH clusters (OER active sites) are successfully integrated within a NiFe-LDH/Fe,N-CB electrocatalyst. The NiFe-LDH/Fe,N-CB electrocatalyst is first prepared by the introduction of Fe-N₄ into carbon black (CB), followed by the growth of NiFe-LDH clusters. The cluster nature of NiFe-LDH effectively avoids the blocking of Fe-N₄-C ORR active centers and affords excellent OER activity. The NiFe-LDH/Fe,N-CB electrocatalyst thus exhibits an excellent bifunctional ORR and OER performance, with a potential gap of only 0.71 V. The NiFe-LDH/Fe,N-CB-based RZAB exhibits an open-circuit voltage of 1.565 V and a specific capacity of 731 mAh g_Zn^-1, which is much better than the RZAB composed of Pt/C and IrO₂. Particularly, the NiFe-LDH/Fe,N-CB-based RZAB displays excellent long-term charging/discharging cyclic stability and rechargeability. Even at a large charging/discharging current density (20 mA cm^-2), the charging/discharging voltage gap is only ∼1.33 V and exhibits an increase smaller than 5% after 140 cycles. This work provides a new low-cost bifunctional ORR/OER electrocatalyst with high activity and superior long-term stability and will be helpful to the commercialization of RZAB in large scale.

The built-in electric field across FeN/Fe3N interface for efficient electrochemical reduction of CO2 to CO

Nanostructured metal-nitrides have attracted tremendous interest as a new generation of catalysts for electroreduction of CO₂, but these structures have limited activity and stability in the reduction condition. Herein, we report a method of fabricating FeN/Fe₃N nanoparticles with FeN/Fe₃N interface exposed on the NP surface for efficient electrochemical CO₂ reduction reaction (CO₂RR). The FeN/Fe₃N interface is populated with Fe-N₄ and Fe-N₂ coordination sites respectively that show the desired catalysis synergy to enhance the reduction of CO₂ to CO. The CO Faraday efficiency reaches 98% at -0.4 V vs. reversible hydrogen electrode, and the FE stays stable from -0.4 to -0.9 V during the 100 h electrolysis time period. This FeN/Fe₃N synergy arises from electron transfer from Fe₃N to FeN and the preferred CO₂ adsorption and reduction to *COOH on FeN. Our study demonstrates a reliable interface control strategy to improve catalytic efficiency of the Fe-N structure for CO₂RR.

Effect of Cooperative Redox Property and Oxygen Vacancies on Bifunctional OER and HER Activities of Solvothermally Synthesized CeO2/CuO Composites

Herein, we report the synthesis of the CeO₂/CuO composite as a bifunctional oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) electrocatalyst in a basic medium. The electrocatalyst with an optimum 1:1 CeO₂/CuO shows low OER and HER overpotentials of 410 and 245 mV, respectively. The Tafel slopes of 60.2 and 108.4 mV/dec are measured for OER and HER, respectively. More importantly, the 1:1 CeO₂/CuO composite electrocatalyst requires only a 1.61 V cell voltage to split water to achieve 10 mA/cm² in a two-electrode cell. The role of oxygen vacancies and the cooperative redox activity at the interface of the CeO₂ and CuO phases is explained in the light of Raman and XPS studies, which play the determining factor for the enhanced bifunctional activity of the 1:1 CeO₂/CuO composite. This work provides guidance for the optimization and design of a low-cost alternative electrocatalyst to replace the expensive noble-metal-based electrocatalyst for overall water splitting.

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

Lithium metal anode (LMA) is puzzled by the serious issues corresponding to infinite volume change and notorious lithium dendrite during long-term stripping/plating process. Herein, the transition metal nitrides array with outstanding lithiophilicity, including CoN, VN, and Ni₃ N, are decorated onto carbon framework as "nests" to uniform Li nucleation and guide Li metal deposition. These transition metal nitrides with excellent conductivity can guarantee the fast electron transport, therefore maintain a stable interface for Li reduction. In addition, the designed multi-dimensional structure of metal nitride array decorated carbon framework can effectively regulate the growth of Li metal during the stripping/plating process. Of note, attributing to the lattice-matching between CoN and Li metal, the composite Li/CoN@CF anode exhibits ultra-stable cycling performance in symmetrical cells (over 4000 h@1 mA cm^-2 with 1 mAh cm^-2 and 1000h@20 mA cm^-2 with 20 mAh cm^-2 ). The assembled full cells based on Li/CoN@CF composite anode, LiFePO₄ or S as cathodes, deliver excellent cycling stability and rate capability. This strategy provides an effective approach to develop a stable lithium metal anode for lithium metal batteries.

Designing High-Quality Electrocatalysts Based on CoO:MnO2@C Supported on Carbon Cloth Fibers as Bifunctional Air Cathodes for Application in Rechargeable Zn-Air Battery

To achieve the requirements of rechargeable Zn-air batteries (ZABs), designing efficient, bifunctional, stable, and cost-effective electrocatalysts is vital for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which still are struggling with unsolved challenges. The present research provides a concept based on the nanoscale composites which were engineered by using MnO₂@C, CoO@C, and CoO:MnO₂@C bifunctional electrocatalysts for fabrication of uniform carbon cloth (CC)-based electrodes. The CoO:MnO₂@C electrocatalyst represented more efficient electrochemical properties through ORR and OER processes with superior positive half-wave potential (E_1/2 = 0.78 V) and better limiting current density (i = 1.10 mA cm^-2) in comparison with MnO₂@C (E_1/2 = 0.71 V, i = 0.92 mA cm^-2) and CoO@C (E_1/2 = 0.69 V, i = 0.86 mA cm^-2) electrocatalysts. For the rechargeable ZABs fabricated by using CoO:MnO₂@C-CC as an O₂-breathing cathode, the specific capacity (SC), peak power density (P), open-circuit voltage (E_OCV), and gap of charge/discharge voltage resulted in values of 520 mAh g_Zn^-1, 210.0 mW cm^-2, and 1.45 and 0.45 V, respectively, that afforded greater electrochemical characters than what was obtained for ZABs based on MnO₂@C-CC (410 mAh g_Zn^-1, 195.0 mW cm^-2, 1.38 and 0.44 V) and CoO@C-CC (440 mAh g_Zn^-1, 165.0 mW cm^-2, 1.15 and 0.54 V). At the same time, lower E_i=10 (= 1.45 V) implied a more efficient OER in alkaline electrolyte solution for CoO:MnO₂@C than MnO₂@C (E_i=10 = 1.50 V) and CoO@C (E_i=10 = 1.39 V). Based on cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), and X-ray photoelectron spectroscopy (XPS) results, it could be stated that the CoO:MnO₂@C catalytic surface could experience 30 and 32% lower charge transfer resistance (R_ct = 13.9 Ω) than MnO₂@C (R_ct = 20.1 Ω) and CoO@C (R_ct = 29.7 Ω), respectively, which empowers an enhancement in ORR/OER performance. Prominently, the design concept of proposed electrocatalysts could suggest clear horizon for the synthesis and development paradigms of bifunctional catalysts for energy storage materials and devices.

Review of High Entropy Alloys Electrocatalysts for Hydrogen Evolution, Oxygen Evolution, and Oxygen Reduction Reaction

Recently, high-entropy alloys (HEAs) have been extensively investigated due to their unique structural design, superior stability, excellent functional feature and superior mechanical performance. However, most of the reported HEAs focus on studying the compositional design and microstructure and mechanical properties of materials. There are relatively few studies on electrochemical performance and theoretical studies of HEAs. In addition, the potential applications of HEAs as energy storage materials for electrocatalysts have attracted widely attention in the development and application aspects of electrocatalysis. It can be attributed to their high conductivity, excellent structural stability and superior electrocatalytic activities with small overpotential and abundant active sites, which is comparable to the commercial noble metal catalysts. In this review, firstly, we briefly discuss the concept and structure characteristics of high entropy alloys. Then, the research progress of high-entropy alloys as electrocatalysis are also summarized, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), respectively. Finally, the future development trend of HEAs is also prospected for energy conversion fields.

Unravelling faradaic electrochemical efficiencies over Fe/Co spinel metal oxides using surface spectroscopy and microscopy techniques

Cobalt and iron metal-based oxide catalysts play a significant role in energy devices. To unravel some interesting parameters, we have synthesized metal oxides of cobalt and iron (i.e. Fe₂O₃, Co₃O₄, Co₂FeO₄ and CoFe₂O₄), and measured the effect of the valence band structure, morphology, size and defects in the nanoparticles towards the electrocatalytic hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). The compositional variations in the cobalt and iron precursors significantly alter the particle size from 60 to <10 nm and simultaneously the shape of the particles (cubic and spherical). The Tauc plot obtained from the solution phase ultraviolet (UV) spectra of the nanoparticles showed band gaps of 2.2, 2.3, 2.5 and 2.8 eV for Fe₂O₃, Co₃O₄, Co₂FeO₄ and CoFe₂O₄, respectively. Further, the valence band structure and work function analysis using ultraviolet photoelectron spectroscopy (UPS) and core level X-ray photoelectron spectroscopy (XPS) analyses provided better structural insight into metal oxide catalysts. In the Co₃O₄ system, the valence band structure favors the HER and Fe₂O₃ favors the OER. The composites Co₂FeO₄ and CoFe₂O₄ show a significant change in their core level (O 1s, Co 2p and Fe 2p spectra) and valence band structure. Co₃O₄ shows an overpotential of 370 mV against 416 mV for Fe₂O₃ at a current density of 2 mA cm^-2 for the HER. Similarly, Fe₂O₃ shows an overpotential of 410 mV against the 435 mV for Co₃O₄ at a current density of 10 mA cm^-2 for the OER. However, for the ORR, Co₃O₄ shows 70 mV improvement in the half-wave potential against Fe₂O₃. The composites (Co₂FeO₄ and CoFe₂O₄) display better performance compared to their respective parent oxide systems (i.e., Co₃O₄ and Fe₂O₃, respectively) in terms of the ORR half-wave potential, which can be attributed to the presence of the oxygen vacancies over the surface in these systems. This was further corroborated in density functional theory (DFT) simulations, wherein the oxygen vacancy formation on the surface of CoFe₂O₄(001) was calculated to be significantly lower (∼50 kJ mol^-1) compared to Co₃O₄ (001). The band diagram of the nanoparticles constructed from the various spectroscopic measurements with work function and band gap provides in-depth understanding of the electrocatalytic process.

Research Progress of Bifunctional Oxygen Reactive Electrocatalysts for Zinc-Air Batteries

Zinc-air batteries (ZABs) have several advantages, including high energy density, cheap price and stable performances with good application prospects in the field of power batteries. The charging and discharging reactions for the air cathode of ZABs are the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), respectively, which play an important role in the whole performance of ZAB. Due to the cost and limited reserves of highly active precious metal catalysts, it is crucial to design alternative efficient and stable dual-functional non-precious metal catalysts. In the present review, we present a systematic summary of the recent progress in the use of transition metal-based electrocatalysts as alternatives to precious metals for the positive poles of ZAB air. Combined with state-of-the-art in situ characterization technologies, a deep understanding of the catalytic mechanism of OER/ORR provided unique insights into the precise design of excellent synthetic non-precious metal catalysts from the perspective of atomic structure. This review further shows that the hybrid electric battery is a new strategy to improve the efficiency of the hybrid electric battery, which could be available to alleviate the problem of resource shortage. Finally, the challenges and research trends for the future development of ZABs were clearly proposed.

Vanadium Nitride Supported on N-Doped Carbon as High-Performance ORR Catalysts for Zn–Air Batteries

It is desirable to prepare low-cost non-noble metal catalysts using a simple and efficient method. Herein, we display for the first time that nitrogen-doped hierarchical porous carbon-supported vanadium nitride (VN/NC/C-x) catalysts can be regulated by dicyandiamide (DCDA). The introduction of DCDA not only effectively controls the pore structure, but also plays an important role in adjusting oxygen vacancies and d-electrons. In addition, DCDA is not only a significant raw material for the N-doped carbon, but also a nitrogen source for the preparation of vanadium nitride. The VN/NC/C-3 catalyst was prepared after optimization of the preparation parameters, and the macro/micro structure demonstrates a superior ORR performance in alkaline media with a positive onset potential of 0.85 V and a half-wave potential of 0.75 V, the limiting current density is as high as 4.52 mA·cm−2, and the Tafel slope is only 75.54 mV·dec−1. The VN/NC/C-3-based Zn–air battery exhibits a highest peak power density (161.82 mW∙cm−2) and an excellent energy density (702.28 mAh·kgZn−1 and 861.51 Wh·kgZn−1). This work provides a valuable synthetic approach for the preparation of other transition metal nitride catalysts with a relative economic value and high performance.

Rare-Earth Single-Atom Catalysts: A New Frontier in Photo/Electrocatalysis

Single-atom catalysts (SACs) provide well-defined active sites with 100% atom utilization, and can be prepared using a wide range of support materials. Therefore, they are attracting global attention, especially in the fields of energy conversion and storage. To date, research has focused on transition-metal and precious-metal-based SACs. More recently, rare-earth (RE)-based SACs have emerged as a new frontier in photo/electrocatalysis owing to their unique electronic structure arising from the spin-orbit coupling of the 4f and valence orbitals, unsaturated coordination environment, and unique behavior as charge-transport bridges. However, a systematic review on the role of the RE active sites, catalytic mechanisms, and synthetic methods for RE SACs is lacking. Therefore, in this review, the latest developments in RE SACs having applications in photo/electrocatalysis are summarized and discussed. First, the theoretical advantages of RE SACs for photo/electrocatalysis are briefly introduced, focusing on the roles of the 4f orbitals and coupled energy levels. In addition, the most recent research progress on RE SACs is summarized for several important photo/electrocatalytic reactions and the corresponding catalytic mechanisms are discussed. Further, the synthetic strategies for the production of RE SACs are reported. Finally, challenges for the development of RE SACs are highlighted, along with future research directions and perspectives.

Boosting the Electrocatalytic Oxygen Evolution of Perovskite LaCo1- x Fex O3 by the Construction of Yolk-Shell Nanostructures and Electronic Modulation

Realizing the rational design of perovskite oxides with controllable compositions and nanostructures remains a tremendous challenge for the development of efficient electrocatalysts. Herein, a ligand-assisted synthetic strategy to fabricate perovskite oxides LaCo_{1- x} Fe_x O₃ with yolk-shell nanostructures is developed. Benefiting from the unique structural and compositional merits, LaCo_0.75 Fe_0.25 O₃ exhibits an overpotential of 310 mV at a current density of 10 mA cm^-2 and long-term stability of 100 h for the oxygen evolution reaction. In situ Raman spectroscopy demonstrates that Fe substitution facilitates the pre-oxidation of Co sites and induces the surface reconstruction into active Co oxyhydroxides at a relatively lower applied potential, guaranteeing excellent catalytic performances. Density functional theory calculations unravel that the appropriate introduction of Fe into perovskite LaCoO₃ leads to the improved electroactivity and durability of the catalyst for the oxygen evolution reaction (OER). Fe-3d orbitals show a pinning effect on Co-3d orbitals to maintain the stable valence state of Co sites at the low overpotential of the OER. Furthermore, Zn-air batteries (ZABs) assembled with LaCo_0.75 Fe_0.25 O₃ display a high open circuit potential of 1.47 V, superior energy density of 905 Wh kg^-1  _Zn , and excellent stability in a large temperature range. This work supplies novel insights into the future developments of perovskite-based electrocatalysts.

Tailoring Oxygen Reduction Reaction Pathway on Spinel Oxides via Surficial Geometrical-Site Occupation Modification Driven by the Oxygen Evolution Reaction

The oxygen reduction reaction (ORR) has been demonstrated as a critical technology for both energy conversion technologies and hydrogen peroxide intermediate production. Herein, an in situ oxygen evolution reaction (OER) surface evolution strategy is applied for changing the surface structure of MnCo₂ O₄ oxide with tetrahedral and octahedral cations vacancies to realize reaction pathway switching from 2e^- ORR and 4e^- ORR. Interestingly, the as-synthesized MnCo₂ O₄ -pristine (MnCo₂ O₄ -P) with the highest surficial Mn/Co octahedron occupation favors two electrons reaction routes exhibiting high H₂ O₂ selectivity (≈80% and reaches nearly 100% at 0.75 V vs RHE); after surface atoms reconstruction, MnCo₂ O₄ -activation (MnCo₂ O₄ -A) with the largest Mn/Co tetrahedron occupation present excellent ORR performance through the four-electron pathway with an ultrahigh onset potential and half-wave potential of 0.78 and 0.92 V, ideal mass activity (MA), and turnover frequencies (TOF) values. Density functional theory (DFT) calculations reveal the concurrent modulations of both Co and Mn by the surface reconstructions, which improve the electroactivity of MnCo₂ O₄ -A toward the 4e^- pathway. This work provides a new perspective to building correlation of OER activation-ORR property, bringing detailed understating for reaction route transformation, and thus guiding the development of certain electrocatalysts with specific purposes.

Co-Based Nanosheets with Transitional Metal Doping for Oxygen Evolution Reaction

Activated two-dimension (2D) materials are used in various applications as high-performance catalysts. Breaking the long-range order of the basal plane of 2D materials can highly promote catalytic activity by supplying more active sites. Here we developed a method to synthesize ultrathin MCoO_x (M = V, Mn, Fe, Ni, Cu, Zn) amorphous nanosheets (ANSs). These Co-based ANSs show high oxygen evolution reaction (OER) activity in alkaline solution due to the broken long-range order and the presence of abundant low bonded O on the basal plane. The stable Fe₁Co₁O_x ANSs also show an overpotential of ca. 240 mV of achieving 10 mA/cm² in OER, better than most reported transition metal-based electrocatalysts.

A Kinetically Superior Rechargeable Zinc-Air Battery Derived from Efficient Electroseparation of Zinc, Lead, and Copper in Concentrated Solutions

Zinc electrodeposition is currently a hot topic because of its widespread use in rechargeable zinc-air batteries. However, Zn deposition has received little attention in organic solvents with much higher ionic conductivity and current efficiency. In this study, a Zn-betaine complex is synthesized by using ZnO and betainium bis[(trifluoromethyl)sulfonyl]imide and its electrochemical behavior for six organic solvents and electrodeposited morphology are studied. Acetonitrile allowed dendrite-free Zn electrodeposition at room temperature with current efficiencies of up to 86 %. From acetonitrile solutions in which Zn, Pb, and Cu complexes are dissolved in high concentrations, Zn and Pb/Cu are efficiently separated electrolytically under potentiostatic control, allowing the purification of solutions prepared directly from natural ores. Additionally, a highly flexible Zn anode with excellent kinetics is obtained by using a carbon fabric substrate. A rechargeable zinc-air battery with these electrodes shows an open-circuit voltage of 1.63 V, is stable for at least 75 cycles at 0.5 mA cm-2 or 33 cycles at 20 mA cm-2 , and allows intermediate cycling at 100 mA cm-2 .

Entropy Enhanced Perovskite Oxide Ceramic for Efficient Electrochemical Reduction of Oxygen to Hydrogen Peroxide

The electrochemical oxygen reduction reaction (ORR) offers a most promising and efficient route to produce hydrogen peroxide (H2 O2 ), yet the lack of cost-effective and high-performance electrocatalysts have restricted its practical application. Herein, an entropy-enhancement strategy has been employed to enable the low-cost perovskite oxide to effectively catalyze the electrosynthesis of H2 O2 . The optimized Pb(NiWMnNbZrTi)1/6 O3 ceramic is available on a kilogram-scale and displays commendable ORR activity in alkaline media with high selectivity over 91 % across the wide potential range for H2 O2 including an outstanding degradation property for organic dyes through the Fenton process. The exceptional performance of this perovskite oxide is attributed to the entropy stabilization-induced polymorphic transformation assuring the robust structural stability, decreased charge mobility as well as synergistic catalytic effects which we confirm using advanced in situ Raman, transient photovoltage, Rietveld refinement as well as finite elemental analysis.

Hierarchical Core-Shell Co2 N/CoP Embedded in N, P-doped Carbon Nanotubes as Efficient Oxygen Reduction Reaction Catalysts for Zn-air Batteries

Projecting a cost-effective and highly efficient electrocatalyst for the oxygen reaction reduction (ORR) counts a great deal for Zn-air batteries. Herein, a hierarchical core-shell ORR catalyst (Co₂ N/CoP@PNCNTs) is developed by embedding cobalt phosphides and/or cobalt nitrides as the core into N, P-doped carbon nanotubes (PNCNTs) as the shell via one-step carbonization, nitridation, and phosphorization of pyrolyzing Co-MOF precursor. The globally N, P-doped structure of Co₂ N/CoP@PNCNTs demonstrates an outstanding electrocatalytic activity in the alkaline solution with the onset and half-wave potentials of 1.07 and 0.85 V respectively. Moreover, a Zn-air battery assembled from Co₂ N/CoP@PNCNTs as the air cathode delivers an open circuit potential of 1.49 V, a maximum power density of 151.1 mW cm^-2 and a specific capacity of 823.8 mAh kg^-1 . It is reflected that Co₂ N/CoP@PNCNTs provides a long-term durability with a slight decline of 15 h in the chronoamperometry measurement and an excellent charge-discharge stability with negligible voltage decay for 150 h at 10 mA cm^-2 in Zn-air batteries. The results reveal that Co₂ N/CoP@PNCNTs has superiority over most Co-N_x -C or Co_x P@C catalysts reported so far. The excellent catalytic properties and stability of Co₂ N/CoP@PNCNTs derive from synergistic effects between Co₂ N/CoP and mesoporous N, P-doped carbon nanotubes.

Highly Reversible Zn Metal Anodes Enabled by Freestanding, Lightweight, and Zincophilic MXene/Nanoporous Oxide Heterostructure Engineered Separator for Flexible Zn-MnO2 Batteries

Aqueous zinc (Zn)-ion batteries are regarded as promising candidates for large-scale energy storage systems because of their high safety, low cost, and environmental benignity. However, the dendrite issue of Zn anode hinders their practical application. Herein, a freestanding, lightweight, and zincophilic MXene/nanoporous oxide heterostructure engineered separator is designed to stabilize a Zn metal anode. The nanoporous oxides prepared by a one-step vacuum distillation technique afford the advantages of large surface area, high porosity, and homogeneous porous structure. The zincophilic MXene@oxides layer can homogenize the electric field distribution, facilitate ion diffusion kinetics, reduce local current density, and promote even Zn ionic flux, which will regulate uniform Zn deposition and suppress side reactions. Accordingly, dendrite-free Zn anodes with stable cyclability are achieved for over 500 h at an ultrahigh area capacity of 10 mAh cm^-2. Besides, flexible, long-lifespan, and high-rate N/S-doped three-dimensional MXene@MnO₂||Zn full cells are constructed with the engineered separator. Moreover, this strategy can be successfully extended to lithium, sodium, potassium, and magnesium metal batteries, indicating that separator regulation is a universal approach to overcome the challenges of metal batteries.