Corrugation in the Weakly Interacting Hexagonal-BN/Cu(111) System: Structure Determination by Combining Noncontact Atomic Force Microscopy and X-ray Standing Waves

Understanding vapor phase growth of hexagonal boron nitride

Hexagonal boron nitride (hBN), with its atomically flat structure, excellent chemical stability, and large band gap energy (∼6 eV), serves as an exemplary 2D insulator in electronics. Additionally, it offers exceptional attributes for the growth and encapsulation of semiconductor transition metal dichalcogenides (TMDCs). Current methodologies for producing hBN thin films primarily involve exfoliating multi-layer or bulk crystals and thin film growth via chemical vapor deposition (CVD), which entails the thermal decomposition and surface reaction of molecular precursors like ammonia boranes (NH3BH3) and borazine (B3N3H6). These molecular precursors contain pre-existing B-N bonds, thus promoting the nucleation of BN. However, the quality and phase purity of resulting BN films are greatly influenced by the film preparation and deposition process conditions that remain a substantial concern. This study aims to comprehensively investigate the impact of varied CVD systems, parameters, and precursor chemistry on the synthesis of high-quality, large scale hBN on both catalytic and non-catalytic substrates. The comparative analysis provided new insights into most effective approaches concerning both quality and scalability of vapor phase grown hBN films.

Structure of Graphene Grown on Cu(111): X-Ray Standing Wave Measurement and Density Functional Theory Prediction

We report the quantitative adsorption structure of pristine graphene on Cu(111) determined using the normal incidence x-ray standing wave technique. The experiments constitute an important benchmark reference for the development of density functional theory approximations able to capture long-range dispersion interactions. Electronic structure calculations based on many-body dispersion-inclusive density functional theory are able to accurately predict the absolute measure and variation of adsorption height when the coexistence of multiple moiré superstructures is considered. This provides a structural model consistent with scanning probe microscopy results.

Local gate control of Mott metal-insulator transition in a 2D metal-organic framework

Electron-electron interactions in materials lead to exotic many-body quantum phenomena, including Mott metal-insulator transitions (MITs), magnetism, quantum spin liquids, and superconductivity. These phases depend on electronic band occupation and can be controlled via the chemical potential. Flat bands in two-dimensional (2D) and layered materials with a kagome lattice enhance electronic correlations. Although theoretically predicted, correlated-electron Mott insulating phases in monolayer 2D metal-organic frameworks (MOFs) with a kagome structure have not yet been realised experimentally. Here, we synthesise a 2D kagome MOF on a 2D insulator. Scanning tunnelling microscopy (STM) and spectroscopy reveal a MOF electronic energy gap of ∼200 meV, consistent with dynamical mean-field theory predictions of a Mott insulator. Combining template-induced (via work function variations of the substrate) and STM probe-induced gating, we locally tune the electron population of the MOF kagome bands and induce Mott MITs. These findings enable technologies based on electrostatic control of many-body quantum phases in 2D MOFs.

Observation of the nonanalytic behavior of optical phonons in monolayer hexagonal boron nitride

Phonon splitting of the longitudinal and transverse optical modes (LO-TO splitting), a ubiquitous phenomenon in three-dimensional polar materials, will break down in two-dimensional (2D) polar systems. Theoretical predictions propose that the LO phonon in 2D polar monolayers becomes degenerate with the TO phonon, displaying a distinctive "V-shaped" nonanalytic behavior near the center of the Brillouin zone. However, the full experimental verification of these nonanalytic behaviors has been lacking. Here, using monolayer hexagonal boron nitride (h-BN) as a prototypical example, we report the comprehensive and direct experimental verification of the nonanalytic behavior of LO phonons by inelastic electron scattering spectroscopy. Interestingly, the slope of the LO phonon in our measurements is lower than the theoretically predicted value for a freestanding monolayer due to the screening of the Cu foil substrate. This enables the phonon polaritons in monolayer h-BN/Cu foil to exhibit ultra-slow group velocity (~5 × 10-6 c, c is the speed of light) and ultra-high confinement (~ 4000 times smaller wavelength than that of light). These exotic behaviors of the optical phonons in h-BN presents promising prospects for future optoelectronic applications.

The role of aromaticity in the cyclization and polymerization of alkyne-substituted porphyrins on Au(111)

Aromaticity is an established and widely used concept for the prediction of the reactivity of organic molecules. However, its role remains largely unexplored in on-surface chemistry, where the interaction with the substrate can alter the electronic and geometric structure of the adsorbates. Here we investigate how aromaticity affects the reactivity of alkyne-substituted porphyrin molecules in cyclization and coupling reactions on a Au(111) surface. We examine and quantify the regioselectivity in the reactions by scanning tunnelling microscopy and bond-resolved atomic force microscopy at the single-molecule level. Our experiments show a substantially lower reactivity of carbon atoms that are stabilized by the aromatic diaza[18]annulene pathway of free-base porphyrins. The results are corroborated by density functional theory calculations, which show a direct correlation between aromaticity and thermodynamic stability of the reaction products. These insights are helpful to understand, and in turn design, reactions with aromatic species in on-surface chemistry and heterogeneous catalysis.

Molecular beam epitaxy growth and scanning tunneling microscopy study of 2D layered materials on epitaxial graphene/silicon carbide

Since the advent of atomically flat graphene, two-dimensional (2D) layered materials have gained extensive interest due to their unique properties. The 2D layered materials prepared on epitaxial graphene/silicon carbide (EG/SiC) surface by molecular beam epitaxy (MBE) have high quality, which can be directly applied without further transfer to other substrates. Scanning tunneling microscopy and spectroscopy (STM/STS) with high spatial resolution and high-energy resolution are often used to study the morphologies and electronic structures of 2D layered materials. In this review, recent progress in the preparation of various 2D layered materials that are either monoelemental or transition metal dichalcogenides on EG/SiC surface by MBE and their STM/STS investigations are introduced.

Significantly enhanced thermally conductive epoxy composite composed of caterpillar-like structured expanded graphite/ boron nitride nanotubes

The trend toward miniaturization, integration and multifunctionality of modern electronics has led to a rapid increase in power density, which makes heat dissipation a critical issue. Despite the great potential of graphite-related nanocomposites in dissipating excess heat to ensure high efficiency and long lifetime of electronic devices, the practical application of these composites is limited by the ultra-low vertical thermal conductivity due to the interfacial thermal resistance between graphite layers. Here, a caterpillar-like hybrid filler was fabricated by the in situ intercalation of boron nitride nanotubes (BNNTs) between expanded graphite (EG) layers based on chemical vapor deposition technology. Owing to the optimized interfacial thermal resistance by forming covalent C-N bonding at the interface of EG and BNNT, the through-plane thermal conductivity of epoxy-based nanocomposites can be up to 5.18 Wm−1 K−1. In addition, the composite possessed electromagnetic interference shielding performance of 33.34 dB while maintaining electrical insulation due to the hierarchical structure. This work provided a new strategy for fabricating polymer-based composites with excellent through-plane thermal conductivity in thermal management applications.

Toward h-BN/GaN Schottky Diodes: Spectroscopic Study on the Electronic Phenomena at the Interface

Hexagonal boron nitride (h-BN), together with other members of the van der Waals crystal family, has been studied for over a decade, both in terms of fundamental and applied research. Up to now, the spectrum of h-BN-based devices has broadened significantly, and systems containing the h-BN/III-V junctions have gained substantial interest as building blocks in, inter alia, light emitters, photodetectors, or transistor structures. Therefore, the understanding of electronic phenomena at the h-BN/III-V interfaces becomes a question of high importance regarding device engineering. In this study, we present the investigation of electronic phenomena at the h-BN/GaN interface by means of contactless electroreflectance (CER) spectroscopy. This nondestructive method enables precise determination of the Fermi level position at the h-BN/GaN interface and the investigation of carrier transport across the interface. CER results showed that h-BN induces an enlargement of the surface barrier height at the GaN surface. Such an effect translates to Fermi level pinning deeper inside the GaN band gap. As an explanation, we propose a mechanism based on electron transfer from GaN surface states to the native acceptor states in h-BN. We reinforced our findings by thorough structural characterization and demonstration of the h-BN/GaN Schottky diode. The surface barriers obtained from CER (0.60 ± 0.09 eV for GaN and 0.91 ± 0.12 eV for h-BN/GaN) and electrical measurements are consistent within the experimental accuracy, proving that CER is an excellent tool for interfacial studies of 2D/III-V hybrids.

Corrosion Resistance of Ultrathin Two-Dimensional Coatings: First-Principles Calculations towards In-Depth Mechanism Understanding and Precise Material Design

In recent years, ultrathin two-dimensional (2D) coatings, e.g., graphene (Gr) and hexagonal boron nitride (h-BN), are intriguing research foci in the field of anticorrosion because their high air stability, excellent impermeability, high optical transparency, and atomistic thickness have endowed them with attractive anticorrosion applications. The microstructure of 2D coatings, coating–substrate interactions, and properties of 2D coatings on substrates in a variety of environmental conditions (e.g., at different temperatures, stresses, and pH values) are the key factors governing the anticorrosion performance of 2D coatings and are among the central topics for all 2D-coating studies. For many conventional experimental measurements (e.g., microscopy and electrochemical methods), there exist challenges to acquire detailed information on the atomistic mechanisms for the involved subnanometer scale corrosion problems. Alternatively, as a precise and efficient quantum-mechanical simulation approach, the first-principles calculation based on density-functional theory (DFT) has become a powerful way to study the thermodynamic and kinetic properties of materials on the atomic scale, as well as to clearly reveal the underlying microscopic mechanisms. In this review, we introduce the anticorrosion performance, existing problems, and optimization ways of Gr and h-BN coatings and summarize important recent DFT results on the critical and complex roles of coating defects and coating–substrate interfaces in governing their corrosion resistance. These DFT progresses have shed much light on the optimization ways towards better anticorrosion 2D coatings and also guided us to make a prospect on the further development directions and promising design schemes for superior anticorrosion ultrathin 2D coatings in the future.

Local stiffness and work function variations of hexagonal boron nitride on Cu(111)

Combined scanning tunnelling and atomic force microscopy using a qPlus sensor enables the measurement of electronic and mechanic properties of two-dimensional materials at the nanoscale. In this work, we study hexagonal boron nitride (h-BN), an atomically thin 2D layer, that is van der Waals-coupled to a Cu(111) surface. The system is of interest as a decoupling layer for functional 2D heterostructures due to the preservation of the h-BN bandgap and as a template for atomic and molecular adsorbates owing to its local electronic trapping potential due to the in-plane electric field. We obtain work function (Φ) variations on the h-BN/Cu(111) superstructure of the order of 100 meV using two independent methods, namely the shift of field emission resonances and the contact potential difference measured by Kelvin probe force microscopy. Using 3D force profiles of the same area we determine the relative stiffness of the Moiré region allowing us to analyse both electronic and mechanical properties of the 2D layer simultaneously. We obtain a sheet stiffness of 9.4 ± 0.9 N·m^-1, which is one order of magnitude higher than the one obtained for h-BN/Rh(111). Using constant force maps we are able to derive height profiles of h-BN/Cu(111) showing that the system has a corrugation of 0.6 ± 0.2 Å, which helps to demystify the discussion around the flatness of the h-BN/Cu(111) substrate.

Hard x-ray photoelectron spectroscopy: a snapshot of the state-of-the-art in 2020

Hard x-ray photoelectron spectroscopy (HAXPES) is establishing itself as an essential technique for the characterisation of materials. The number of specialised photoelectron spectroscopy techniques making use of hard x-rays is steadily increasing and ever more complex experimental designs enable truly transformative insights into the chemical, electronic, magnetic, and structural nature of materials. This paper begins with a short historic perspective of HAXPES and spans from developments in the early days of photoelectron spectroscopy to provide an understanding of the origin and initial development of the technique to state-of-the-art instrumentation and experimental capabilities. The main motivation for and focus of this paper is to provide a picture of the technique in 2020, including a detailed overview of available experimental systems worldwide and insights into a range of specific measurement modi and approaches. We also aim to provide a glimpse into the future of the technique including possible developments and opportunities.

The role of three-dimensional bulk clusters in determining surface morphologies of intermetallic compounds: Quasicrystals to clathrates

Nanostructured alloy surfaces present unique physical properties and chemical reactivities that are quite different from those of the close-packed low-index surfaces. This can be beneficial for the design of new catalysts and electronic and data-storage devices. However, the growth of such surface nanostructures is not straightforward at the atomic scale. The cluster-based bulk structure of intermetallic compounds presents an original alternative to build surfaces with specific morphologies, in comparison to more traditional methods based on mechanical, chemical, or plasma treatments. It relies on their specific electronic structures-built from a network of bonds with a combination of ionic, covalent-like, and metallic characters, and also depends on the experimental conditions. In this paper, a few surface structures of cluster-based intermetallics are reviewed, with a special emphasis on quasicrystals and clathrates. We show how the intrinsic electronic properties of such compounds, as well as the surface preparation conditions, impact their surface morphologies, which can further influence the growth of atomic and molecular thin films at their surface.

The influence of an interfacial hBN layer on the fluorescence of an organic molecule

We investigated the ability of a single layer of hexagonal boron nitride (hBN) to decouple the excited state of the organic molecule 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA) from the supporting Cu(111) surface by Raman and fluorescence (FL) spectroscopy. The Raman fingerprint-type spectrum of PTCDA served as a monitor for the presence of molecules on the surface. Several broad and weak FL lines between 18,150 and 18,450 cm^-1 can be detected, already from the first monolayer onward. In contrast, FL from PTCDA on a bare Cu(111) surface is present only from the second PTCDA layer onward. Hence, a single layer of hBN decouples PTCDA from the metal substrate to an extent that a weak radiative FL decay of the optical excitation can occur. The different FL lines can be ascribed to different environments of the adsorption sites, namely molecules adsorbed at surface defects, in large ordered domains, and located in the second layer.

Adsorption of Azobenzene on Hexagonal Boron Nitride Nanomesh Supported by Rh(111)

Adsorption properties of azobenzene, the prototypical molecular switch, were investigated on a hexagonal boron nitride (h-BN) monolayer (“nanomesh”) prepared on Rh(111). The h-BN layer was produced by decomposing borazine (B₃N₃H₆) at 1000–1050 K. Temperature-programmed desorption (TPD) studies revealed that azobenzene molecules adsorbed on the “wire” and “pore” regions desorb at slightly different temperatures. Angle-resolved high-resolution electron energy loss spectroscopy (HREELS) measurements demonstrated that the first molecular layer is characterized predominantly by an adsorption geometry with the molecular plane parallel to the surface. Scanning tunneling microscopy (STM) indicated a clear preference for adsorption in the pores, manifesting a templating effect, but in some cases one-dimensional molecular stripes also form, implying attractive molecule–molecule interaction. Density functional theory (DFT) calculations provided further details regarding the adsorption energetics and bonding and confirmed the experimental findings that the molecules adsorb with the phenyl rings parallel to the surface, preferentially in the pores, and indicated also the presence of an attractive molecule–molecule interaction.

Polycyclic aromatic chains on metals and insulating layers by repetitive [3+2] cycloadditions

The vast potential of organic materials for electronic, optoelectronic and spintronic devices entails substantial interest in the fabrication of π-conjugated systems with tailored functionality directly at insulating interfaces. On-surface fabrication of such materials on non-metal surfaces remains to be demonstrated with high yield and selectivity. Here we present the synthesis of polyaromatic chains on metallic substrates, insulating layers, and in the solid state. Scanning probe microscopy shows the formation of azaullazine repeating units on Au(111), Ag(111), and h-BN/Cu(111), stemming from intermolecular homo-coupling via cycloaddition reactions of CN-substituted polycyclic aromatic azomethine ylide (PAMY) intermediates followed by subsequent dehydrogenation. Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry demonstrates that the reaction also takes place in the solid state in the absence of any catalyst. Such intermolecular cycloaddition reactions are promising methods for direct synthesis of regioregular polyaromatic polymers on arbitrary insulating surfaces.

Self-assembly and spectroscopic fingerprints of photoactive pyrenyl tectons on hBN/Cu(111)

The controlled modification of electronic and photophysical properties of polycyclic aromatic hydrocarbons by chemical functionalization, adsorption on solid supports, and supramolecular organization is the key to optimize the application of these compounds in (opto)electronic devices. Here, we present a multimethod study comprehensively characterizing a family of pyridin-4-ylethynyl-functionalized pyrene derivatives in different environments. UV-vis measurements in toluene solutions revealed absorption at wavelengths consistent with density functional theory (DFT) calculations, while emission experiments showed a high fluorescence quantum yield. Scanning tunneling microscopy (STM) and spectroscopy (STS) measurements of the pyrene derivatives adsorbed on a Cu(111)-supported hexagonal boron nitride (hBN) decoupling layer provided access to spatially and energetically resolved molecular electronic states. We demonstrate that the pyrene electronic gap is reduced with an increasing number of substituents. Furthermore, we discuss the influence of template-induced gating and supramolecular organization on the energies of distinct molecular orbitals. The selection of the number and positioning of the pyridyl termini in tetrasubstituted, trans- and cis-like-disubstituted derivatives governed the self-assembly of the pyrenyl core on the nanostructured hBN support, affording dense-packed arrays and intricate porous networks featuring a kagome lattice.

Interfacial charge transfer enhancement via formation of binary molecular assemblies on electronically corrugated boron nitride

Using scanning tunneling microscopy/spectroscopy (STM/STS) in conjunction with finite element simulation, we investigate the interfacial behaviors in single-component zinc phthalocyanine (ZnPc) and hexadecafluorinated zinc phthalocyanine (F16ZnPc) molecular overlayers as well as their 1 : 1 mixed-phase superstructures on h-BN/Cu(111). We show that the formation of the binary molecular superstructure drastically increases the charge transfer between F16ZnPc molecules and the substrate, which is attributed to the greater electrostatic stability of the binary assembly compared to that of the pure phase. This study highlights the significant complication in the design of donor-acceptor molecular thin films as the presence of the substrate, even a weakly interacting one, such as h-BN/metal, can still perturb the intermolecular charge transfer and thereby the physical behaviors of the hybrid system via interfacial processes.

Pseudo-ordered distribution of Ir nanocrystals on h-BN

A 2D material consisting of a pseudo-ordered distribution of Ir nanocrystals supported on a h-BN/Rh(111) surface is presented here. The particular spatial distribution of the Ir nanoparticles is achieved thanks to the existence of a large variety of adsorption positions within the pores of the h-BN/Rh(111) nanomesh template with hexagonal symmetry. The resulting deviations of nanoparticle positions with respect to a perfect hexagonal lattice, which make this material of special interest in the field of optics, can be tuned by the temperature and the amount of Ir. Upon annealing, this material undergoes slight structural changes in the temperature range of 370-570 K and much more drastic ones, due to cluster coalescence, between 670 and 770 K. This relatively high onset of coalescence is encouraging for using this 2D material as a catalyst for reactions such as the oxidation of carbon monoxide or of nitrogen monoxide, which are especially relevant in the field of environmental science. Finally, metal nanostructures exhibiting regular geometries have been created from this material using a scanning tunneling microscope tip. Because of the insulating character of h-BN, these nanostructures could be very promising to use in the design of conductive nanotracks.

The qPlus sensor, a powerful core for the atomic force microscope

Atomic force microscopy (AFM) was introduced in 1986 and has since made its way into surface science, nanoscience, chemistry, biology, and material science as an imaging and manipulating tool with a rising number of applications. AFM can be employed in ambient and liquid environments as well as in vacuum and at low and ultralow temperatures. The technique is an offspring of scanning tunneling microscopy (STM), where the tunneling tip of the STM is replaced by using a force sensor with an attached tip. Measuring the tiny chemical forces that act between the tip and the sample is more difficult than measuring the tunneling current in STM. Therefore, even 30 years after the introduction of AFM, progress in instrumentation is substantial. Here, we focus on the core of the AFM, the force sensor with its tip and detection mechanism. Initially, force sensors were mainly micro-machined silicon cantilevers, mainly using optical methods to detect their deflection. The qPlus sensor, originally based on a quartz tuning fork and now custom built from quartz, is self-sensing by utilizing the piezoelectricity of quartz. The qPlus sensor allows us to perform STM and AFM in parallel, and the spatial resolution of its AFM channel has reached the subatomic level, exceeding the resolution of STM. Frequency modulation AFM (FM-AFM), where the frequency of an oscillating cantilever is altered by the gradient of the force that acts between the tip and the sample, has emerged over the years as the method that provides atomic and subatomic spatial resolution as well as force spectroscopy with sub-piconewton sensitivity. FM-AFM is precise; because of all physical observables, time and frequency can be measured by far with the greatest accuracy. By design, FM-AFM clearly separates conservative and dissipative interactions where conservative forces induce a frequency shift and dissipative interactions alter the power needed to maintain a constant oscillation amplitude of the cantilever. As it operates in a noncontact mode, it enables simultaneous AFM and STM measurements. The frequency stability of quartz and the small oscillation amplitudes that are possible with stiff quartz sensors optimize the signal to noise ratio. Here, we discuss the operating principles, the assembly of qPlus sensors, amplifiers, limiting factors, and applications. Applications encompass unprecedented subatomic spatial resolution, the measurement of forces that act in atomic manipulation, imaging and spectroscopy of spin-dependent forces, and atomic resolution of organic molecules, graphite, graphene, and oxides.

Quantitative determination of a model organic/insulator/metal interface structure

By combining X-ray photoelectron spectroscopy, X-ray standing waves and scanning tunneling microscopy, we investigate the geometric and electronic structure of a prototypical organic/insulator/metal interface, namely cobalt porphine on monolayer hexagonal boron nitride (h-BN) on Cu(111). Specifically, we determine the adsorption height of the organic molecule and show that the original planar molecular conformation is preserved in contrast to the adsorption on Cu(111). In addition, we highlight the electronic decoupling provided by the h-BN spacer layer and find that the h-BN-metal separation is not significantly modified by the molecular adsorption. Finally, we find indication of a temperature dependence of the adsorption height, which might be a signature of strongly-anisotropic thermal vibrations of the weakly bonded molecules.

Tuning Band Gap and Work Function Modulations in Monolayer hBN/Cu(111) Heterostructures with Moiré Patterns

The moiré pattern formed between a two-dimensional (2D) material and the substrate has played a crucial role in tuning the electronic structure of the 2D material. Here, by using scanning tunneling microscopy and spectroscopy, we found a moiré-pattern-dependent band gap and work function modulation in hexagonal boron nitride (hBN)/Cu(111) heterostructures, whose amplitudes increase with the moiré pattern wavelength. Moreover, the work function modulation shifts agree well with the conduction band edge shifts, indicating a spatially constant electron affinity for the hBN layer. Density functional theory calculations showed that these observations in hBN/Cu(111) heterostructures mainly originated from the hybridization of the N 3p _z orbital and Cu 4s orbital in different atomic configurations. Our results show that the twist-angle dependence of moiré patterns in hBN/Cu(111) heterostructures can be used to tailor the electronic properties including band gap and work function.

Elemental Identification by Combining Atomic Force Microscopy and Kelvin Probe Force Microscopy

There are currently no experimental techniques that combine atomic-resolution imaging with elemental sensitivity and chemical fingerprinting on single molecules. The advent of using molecular-modified tips in noncontact atomic force microscopy (nc-AFM) has made it possible to image (planar) molecules with atomic resolution. However, the mechanisms responsible for elemental contrast with passivated tips are not fully understood. Here, we investigate elemental contrast by carrying out both nc-AFM and Kelvin probe force microscopy (KPFM) experiments on epitaxial monolayer hexagonal boron nitride (hBN) on Ir(111). The hBN overlayer is inert, and the in-plane bonds connecting nearest-neighbor boron and nitrogen atoms possess strong covalent character and a bond length of only ∼1.45 Å. Nevertheless, constant-height maps of both the frequency shift Δ f and the local contact potential difference exhibit striking sublattice asymmetry. We match the different atomic sites with the observed contrast by comparison with nc-AFM image simulations based on the density functional theory optimized hBN/Ir(111) geometry, which yields detailed information on the origin of the atomic-scale contrast.

Role of Carbon Interstitials in Transition Metal Substrates on Controllable Synthesis of High-Quality Large-Area Two-Dimensional Hexagonal Boron Nitride Layers

Reliable and controllable synthesis of two-dimensional (2D) hexagonal boron nitride (h-BN) layers is highly desirable for their applications as 2D dielectric and wide bandgap semiconductors. In this work, we demonstrate that the dissolution of carbon into cobalt (Co) and nickel (Ni) substrates can facilitate the growth of h-BN and attain large-area 2D homogeneity. The morphology of the h-BN film can be controlled from 2D layer-plus-3D islands to homogeneous 2D few-layers by tuning the carbon interstitial concentration in the Co substrate through a carburization process prior to the h-BN growth step. Comprehensive characterizations were performed to evaluate structural, electrical, optical, and dielectric properties of these samples. Single-crystal h-BN flakes with an edge length of ∼600 μm were demonstrated on carburized Ni. An average breakdown electric field of 9 MV/cm was achieved for an as-grown continuous 3-layer h-BN on carburized Co. Density functional theory calculations reveal that the interstitial carbon atoms can increase the adsorption energy of B and N atoms on the Co(111) surface and decrease the diffusion activation energy and, in turn, promote the nucleation and growth of 2D h-BN.

Resolving the Chemically Discrete Structure of Synthetic Borophene Polymorphs

Atomically thin two-dimensional (2D) materials exhibit superlative properties dictated by their intralayer atomic structure, which is typically derived from a limited number of thermodynamically stable bulk layered crystals (e.g., graphene from graphite). The growth of entirely synthetic 2D crystals, those with no corresponding bulk allotrope, would circumvent this dependence upon bulk thermodynamics and substantially expand the phase space available for structure-property engineering of 2D materials. However, it remains unclear if synthetic 2D materials can exist as structurally and chemically distinct layers anchored by van der Waals (vdW) forces, as opposed to strongly bound adlayers. Here, we show that atomically thin sheets of boron (i.e., borophene) grown on the Ag(111) surface exhibit a vdW-like structure without a corresponding bulk allotrope. Using X-ray standing wave-excited X-ray photoelectron spectroscopy, the positions of boron in multiple chemical states are resolved with sub-angström spatial resolution, revealing that the borophene forms a single planar layer that is 2.4 Å above the unreconstructed Ag surface. Moreover, our results reveal that multiple borophene phases exhibit these characteristics, denoting a unique form of polymorphism consistent with recent predictions. This observation of synthetic borophene as chemically discrete from the growth substrate suggests that it is possible to engineer a much wider variety of 2D materials than those accessible through bulk layered crystal structures.

Layered Insulator/Molecule/Metal Heterostructures with Molecular Functionality through Porphyrin Intercalation

Intercalation of molecules into layered materials is actively researched in materials science, chemistry, and nanotechnology, holding promise for the synthesis of van der Waals heterostructures and encapsulated nanoreactors. However, the intercalation of organic molecules that exhibit physical or chemical functionality remains a key challenge to date. In this work, we present the synthesis of heterostructures consisting of porphines sandwiched between a Cu(111) substrate and an insulating hexagonal boron nitride ( h-BN) monolayer. We investigated the energetics of the intercalation, as well as the influence of the capping h-BN layer on the behavior of the intercalated molecules using scanning probe microscopy and density functional theory calculations. While the self-assembly of the molecules is altered upon intercalation, we show that the intrinsic functionalities, such as switching between different porphine tautomers, are preserved. Such insulator/molecule/metal structures provide opportunities to protect organic materials from deleterious effects of atmospheric environment, can be used to control chemical reactions through spatial confinement, and give access to layered materials based on the ample availability of synthesis protocols provided by organic chemistry.