1
|
Hua R, Xu C, Yang H, Qu D, Zhang R, Liu D, Tang H, Li J, Qu D. Potassium-Hydrogen Hybrid Ion Alkaline Battery: A New Rechargeable Aqueous Battery Combined a K + Storage Cathode and an Electrochemical Hydrogen Storage Anode. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38597319 DOI: 10.1021/acsami.4c01499] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/11/2024]
Abstract
A rechargeable aqueous hybrid ion alkaline battery, using a proton and a potassium ion as charge carriers for the anode and cathode, respectively, is proposed in this study by using well-developed potassium nickel hexacyanoferrate as the cathode material and mesoporous carbon sheets as the anode material, respectively. The constructed battery operates in a concentrated KOH solution, in which the energy storage mechanism for potassium nickel hexacyanoferrate involves the redox reaction of Fe2+/Fe3+ associated with potassium ion insertion/extraction and the redox reaction of Ni(OH)2/NiOOH. The mechanism for the carbon anode is electrochemical hydrogen storage. The cathode made of potassium nickel hexacyanoferrate exhibits both an ultrahigh capacity of 232.7 mAh g-1 under 100 mA g-1 and a consistent performance of 214 mAh g-1 at 2000 mA g-1 (with a capacity retention of 92.8% after 200 cycles). The mesoporous carbon sheet anode exhibits a capacity of 87.6 mAh·g-1 at 100 mA g-1 with a good rate and cyclic performance. The full cell provides an operational voltage of 1.55 V, a capacity of 93.6 mAh g-1 at 100 mA g-1, and 82.4% capacity retention after 1000 cycles at 2000 mA g-1 along with a low self-discharge rate. The investigation and discussion about the energy storage mechanisms for both electrode materials are also provided.
Collapse
Affiliation(s)
- Ruiqing Hua
- Department of Chemistry, School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
| | - Caiyun Xu
- Department of Chemistry, School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
| | - Hongwei Yang
- Department of Chemistry, School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
| | - Deyu Qu
- Department of Chemistry, School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
| | - Ruiming Zhang
- Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Xianhu Hydrogen Valley, Foshan 528200, P. R. China
| | - Dan Liu
- Department of Chemistry, School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
- Department of Mechanical Engineering, College of Engineering and Applied Science, University of Wisconsin-Milwaukee, 3200 N. Cramer Street, Milwaukee, Wisconsin 53211, United States
- Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Xianhu Hydrogen Valley, Foshan 528200, P. R. China
| | - Haolin Tang
- State Key Laboratory of Advanced Technology for Material Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
- Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Xianhu Hydrogen Valley, Foshan 528200, P. R. China
| | - Junsheng Li
- Department of Chemistry, School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, 122 Luoshi Road, Wuhan 430070, Hubei, P. R. China
- Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Xianhu Hydrogen Valley, Foshan 528200, P. R. China
| | - Deyang Qu
- Department of Mechanical Engineering, College of Engineering and Applied Science, University of Wisconsin-Milwaukee, 3200 N. Cramer Street, Milwaukee, Wisconsin 53211, United States
| |
Collapse
|
2
|
Li J, Li R, Wang W, Lan K, Zhao D. Ordered Mesoporous Crystalline Frameworks Toward Promising Energy Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2311460. [PMID: 38163922 DOI: 10.1002/adma.202311460] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2023] [Revised: 12/13/2023] [Indexed: 01/03/2024]
Abstract
Ordered mesoporous crystalline frameworks (MCFs), which possess both functional frameworks and well-defined porosity, receive considerable attention because of their unique properties including high surface areas, large pore sizes, tailored porous structures, and compositions. Construction of novel crystalline mesoporous architectures that allows for rich accessible active sites and efficient mass transfer is envisaged to offer ample opportunities for potential energy-related applications. In this review, the rational synthesis, unique structures, and energy applications of MCFs are the main focus. After summarizing the synthetic approaches, an emphasis is placed on the delicate control of crystallites, mesophases, and nano-architectures by concluding basic principles and showing representative examples. Afterward, the currently fabricated components of MCFs such as metals, metal oxides, metal sulfides, and metal-organic frameworks are described in sequence. Further, typical applications of MCFs in rechargeable batteries, supercapacitors, electrocatalysis, and photocatalysis are highlighted. This review ends with the possible development and synthetic challenges of MCFs as well as a future prospect for high-efficiency energy applications, which underscores a pathway for developing advanced materials.
Collapse
Affiliation(s)
- Jialong Li
- College of Energy Materials and Chemistry, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, P. R. China
| | - Rongyao Li
- College of Energy Materials and Chemistry, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, P. R. China
| | - Wendi Wang
- College of Energy Materials and Chemistry, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, P. R. China
| | - Kun Lan
- College of Energy Materials and Chemistry, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, P. R. China
| | - Dongyuan Zhao
- College of Energy Materials and Chemistry, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, P. R. China
- College of Chemistry and Materials, Department of Chemistry, Laboratory of Advanced Materials, Fudan University, Shanghai, 200433, P. R. China
| |
Collapse
|
3
|
Kim KW, Park B, Kim J, Seok H, Kim T, Jo C, Kim JK. Block Copolymer-Directed Facile Synthesis of N-Doped Mesoporous Graphitic Carbon for Reliable, High-Performance Zn Ion Hybrid Supercapacitor. ACS APPLIED MATERIALS & INTERFACES 2023; 15:57905-57912. [PMID: 37040434 DOI: 10.1021/acsami.3c02791] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
Ordered mesoporous carbons (OMCs) are promising materials for cathode materials of a Zn ion hybrid capacitor (Zn HC) due to their high surface area and interconnected porous structure. Graphitization of the framework and nitrogen doping have been used to improve the energy storage performance of the OMCs by enhancing electrical conductivity, pseudocapacitive reaction sites, and surface affinity toward aqueous electrolytes. Thus, when both methods are simultaneously implemented to the OMCs, the Zn HC would have improved energy storage performance. Herein, we introduce a facile synthetic method for N-doped mesoporous graphitic carbon (N-mgc) by utilizing polystyrene-block-poly(2-vinlypyridine) copolymer (PS-b-P2VP) as both soft-template and carbon/nitrogen sources. Co-assembly of PS-b-P2VP with Ni precursors for graphitization formed a mesostructured composite, which was converted to N-doped graphitic carbon through catalytic pyrolysis. After selective removal of Ni, N-mgc was prepared. The obtained N-mgc exhibited interconnected mesoporous structure with high nitrogen content and high surface area. When N-mgc was employed as a cathode material in Zn ion HC, excellent energy storage performance was achieved: a high specific capacitance (43 F/g at 0.2 A/g), a high energy density of 19.4 Wh/kg at a power density of 180 W/kg, and reliable cycle stability (>3000 cycles).
Collapse
Affiliation(s)
- Keon-Woo Kim
- National Creative Research Initiative Center for Hybrid Nano Materials by High-level Architectural Design of Block Copolymer, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
| | - Bomi Park
- National Creative Research Initiative Center for Hybrid Nano Materials by High-level Architectural Design of Block Copolymer, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
| | - Jun Kim
- National Creative Research Initiative Center for Hybrid Nano Materials by High-level Architectural Design of Block Copolymer, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
| | - Hyunho Seok
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Republic of Korea
| | - Taesung Kim
- SKKU Advanced Institute of Nanotechnology (SAINT), Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Republic of Korea
- Department of Mechanical Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 16419, Republic of Korea
| | - Changshin Jo
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
- Graduate Institute of Ferrous & Energy Materials Technology (GIFT), Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
| | - Jin Kon Kim
- National Creative Research Initiative Center for Hybrid Nano Materials by High-level Architectural Design of Block Copolymer, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyungbuk 37673, Republic of Korea
| |
Collapse
|
4
|
Qin J, Yang Z, Xing F, Zhang L, Zhang H, Wu ZS. Two-Dimensional Mesoporous Materials for Energy Storage and Conversion: Current Status, Chemical Synthesis and Challenging Perspectives. ELECTROCHEM ENERGY R 2023. [DOI: 10.1007/s41918-022-00177-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/29/2023]
|
5
|
Wang F, Han Y, Feng X, Xu R, Li A, Wang T, Deng M, Tong C, Li J, Wei Z. Mesoporous Carbon-Based Materials for Enhancing the Performance of Lithium-Sulfur Batteries. Int J Mol Sci 2023; 24:ijms24087291. [PMID: 37108464 PMCID: PMC10138428 DOI: 10.3390/ijms24087291] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2023] [Revised: 03/25/2023] [Accepted: 03/27/2023] [Indexed: 04/29/2023] Open
Abstract
The most promising energy storage devices are lithium-sulfur batteries (LSBs), which offer a high theoretical energy density that is five times greater than that of lithium-ion batteries. However, there are still significant barriers to the commercialization of LSBs, and mesoporous carbon-based materials (MCBMs) have attracted much attention in solving LSBs' problems, due to their large specific surface area (SSA), high electrical conductivity, and other unique advantages. The synthesis of MCBMs and their applications in the anodes, cathodes, separators, and "two-in-one" hosts of LSBs are reviewed in this study. Most interestingly, we establish a systematic correlation between the structural characteristics of MCBMs and their electrochemical properties, offering recommendations for improving performance by altering the characteristics. Finally, the challenges and opportunities of LSBs under current policies are also clarified. This review provides ideas for the design of cathodes, anodes, and separators for LSBs, which could have a positive impact on the performance enhancement and commercialization of LSBs. The commercialization of high energy density secondary batteries is of great importance for the achievement of carbon neutrality and to meet the world's expanding energy demand.
Collapse
Affiliation(s)
- Fangzheng Wang
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Yuying Han
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Xin Feng
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Rui Xu
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Ang Li
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Tao Wang
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Mingming Deng
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Cheng Tong
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Jing Li
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| | - Zidong Wei
- School of Chemistry and Chemical Engineering, Chongqing University, Daxuecheng South Road 55, Chongqing 401331, China
| |
Collapse
|
6
|
Song Y, Tang W, Han L, Liu Y, Shen C, Yin X, Ouyang B, Su Y, Guo X. Integration of nanomaterial sensing layers on printable organic field effect transistors for highly sensitive and stable biochemical signal conversion. NANOSCALE 2023; 15:5537-5559. [PMID: 36880412 DOI: 10.1039/d2nr05863d] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Organic field effect transistor (OFET) devices are one of the most popular candidates for the development of biochemical sensors due to their merits of being flexible and highly customizable for low-cost large-area manufacturing. This review describes the key points in constructing an extended-gate type OFET (EGOFET) biochemical sensor with high sensitivity and stability. The structure and working mechanism of OFET biochemical sensors are described firstly, emphasizing the importance of critical material and device engineering to higher biochemical sensing capabilities. Next, printable materials used to construct sensing electrodes (SEs) with high sensitivity and stability are presented with a focus on novel nanomaterials. Then, methods of obtaining printable OFET devices with steep subthreshold swing (SS) for high transconductance efficiency are introduced. Finally, approaches for the integration of OFETs and SEs to form portable biochemical sensor chips are introduced, followed by several demonstrations of sensory systems. This review will provide guidelines for optimizing the design and manufacturing of OFET biochemical sensors and accelerating the movement of OFET biochemical sensors from the laboratory to the marketplace.
Collapse
Affiliation(s)
- Yawen Song
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Wei Tang
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Lei Han
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Yan Liu
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Chaochao Shen
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Xiaokuan Yin
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Bang Ouyang
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Yuezeng Su
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| | - Xiaojun Guo
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
| |
Collapse
|
7
|
Kumar A, Dutta S, Kim S, Kwon T, Patil SS, Kumari N, Jeevanandham S, Lee IS. Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications. Chem Rev 2022; 122:12748-12863. [PMID: 35715344 DOI: 10.1021/acs.chemrev.1c00637] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.
Collapse
Affiliation(s)
- Amit Kumar
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - Soumen Dutta
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - Seonock Kim
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - Taewan Kwon
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - Santosh S Patil
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - Nitee Kumari
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - Sampathkumar Jeevanandham
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea
| | - In Su Lee
- Creative Research Initiative Center for Nanospace-confined Chemical Reactions (NCCR) and Department of Chemistry, Pohang University of Science and Technology (POSTECH), Pohang 37673, Korea.,Institute for Convergence Research and Education in Advanced Technology (I-CREATE), Yonsei University, Seoul 03722, Korea
| |
Collapse
|
8
|
Yan J, Miao L, Duan H, Zhu D, Lv Y, Li L, Gan L, Liu M. High-energy aqueous supercapacitors enabled by N/O codoped carbon nanosheets and “water-in-salt” electrolyte. CHINESE CHEM LETT 2022. [DOI: 10.1016/j.cclet.2021.08.123] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
9
|
Wang Z, Liu Z, Wang L, Zhao K, Sun X, Jia D, Liu J. Construction of core‐shell heterostructured nanoarrays of Cu(OH)2@NiFe‐layered double hydroxide via facile potentiostatic electrodeposition for highly efficient supercapacitors. ChemElectroChem 2022. [DOI: 10.1002/celc.202101711] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Zihao Wang
- Qingdao University College of Materials Science and Engineering CHINA
| | - Zhiqiang Liu
- Qingdao University College of Materials Science and Engineering CHINA
| | - Lei Wang
- Qingdao University College of Materials Science and Engineering CHINA
| | - Kai Zhao
- Qingdao University College of Materials Science and Engineering CHINA
| | - Xiaolin Sun
- Qingdao University College of Materials Science and Engineering CHINA
| | - Dedong Jia
- Qingdao University College of Materials Science and Engineering CHINA
| | | |
Collapse
|
10
|
Chen X, Shi S, Han X, Li M, Nian Y, Sun J, Zhang W, Yue T, Wang J. Insights into high-efficient removal of tetracycline by a codoped mesoporous carbon adsorbent. Chin J Chem Eng 2022. [DOI: 10.1016/j.cjche.2021.07.023] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|
11
|
Wang S, Mao Q, Ren H, Wang W, Wang Z, Xu Y, Li X, Wang L, Wang H. Liquid Metal Interfacial Growth and Exfoliation to Form Mesoporous Metallic Nanosheets for Alkaline Methanol Electroreforming. ACS NANO 2022; 16:2978-2987. [PMID: 35061352 DOI: 10.1021/acsnano.1c10262] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Two-dimensional (2D) materials have spurred great interest in the field of catalysis due to their fascinating electronic and thermal transport properties. However, adding uniform mesopores to 2D metallic materials has remained a great challenge owing to the inherent high surface energy. Here, we introduce a generic liquid metal interfacial growth and exfoliation strategy to synthesize a library of penetrating mesoporous metallic nanosheets. The formation of liquid-metal/water interface promotes the adsorption of metal ion-encapsulated copolymer micelles, induces the self-limiting galvanic replacement reaction, and enables the exfoliation of products under mechanical agitation. These 2D mesoporous metallic nanosheets with large lateral size, narrow thickness distribution, and uniform perforated structure provide facilitated channels and abundant active sites for catalysis. Typically, the generated mesoporous PtRh nanosheets (mPtRh NSs) exhibit superior electroactivity and durability in hydrogen evolution reaction as well as methanol electrooxidation in alkaline media. Moreover, the constructed symmetric mPtRh NSs cell requires only a relative low electrolysis voltage to achieve methanol-assisted hydrogen production compared with traditional overall water electrolysis. The work reveals a specific growth pattern of noble metals at the liquid-metal/water interface and thus introduces a versatile strategy to form 2D penetrating mesoporous metallic nanomaterials with extensive high-performance applications.
Collapse
Affiliation(s)
- Shengqi Wang
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Qiqi Mao
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Hang Ren
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Wenxin Wang
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Ziqiang Wang
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - You Xu
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Xiaonian Li
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Liang Wang
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| | - Hongjing Wang
- State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, 18 Chaowang road, Hangzhou, Zhejiang 310014, P. R. China
| |
Collapse
|
12
|
Deng Q, Mao W, Han L. Structural Solution of Porous Materials on the Mesostructural Scale by Electron Microscopy. ACTA CHIMICA SINICA 2022. [DOI: 10.6023/a22030136] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
13
|
Duan L, Wang C, Zhang W, Ma B, Deng Y, Li W, Zhao D. Interfacial Assembly and Applications of Functional Mesoporous Materials. Chem Rev 2021; 121:14349-14429. [PMID: 34609850 DOI: 10.1021/acs.chemrev.1c00236] [Citation(s) in RCA: 77] [Impact Index Per Article: 25.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/08/2023]
Abstract
Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.
Collapse
Affiliation(s)
- Linlin Duan
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| | - Changyao Wang
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| | - Wei Zhang
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| | - Bing Ma
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| | - Yonghui Deng
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| | - Wei Li
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| | - Dongyuan Zhao
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai 200433, P.R. China
| |
Collapse
|
14
|
Liu Z, Xiong H, Luo Y, Zhang L, Hu K, Zhang L, Gao Y, Qiao ZA. Interface-Induced Self-Assembly Strategy Toward 2D Ordered Mesoporous Carbon/MXene Heterostructures for High-Performance Supercapacitors. CHEMSUSCHEM 2021; 14:4422-4430. [PMID: 34350723 DOI: 10.1002/cssc.202101374] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/01/2021] [Revised: 08/04/2021] [Indexed: 06/13/2023]
Abstract
Two-dimensional transition metal carbonitrides (MXene) have demonstrated great potential in many fields. However, the serious aggregation and poor thermodynamic stability of MXene greatly hinder their applications. Here, an interface-induced self-assembly strategy to synthesize ordered mesoporous carbon/Ti3 C2 Tx heterostructures (OMCTs) was developed. In this method, the composite monomicelles formed by Pluronic F127 and low-molecular-weight phenolic resol self-assembled on the surface of Ti3 C2 Tx to prevent the restacking of Ti3 C2 Tx and maintain its thermostability. The obtained OMCTs possessed high specific surface areas (259-544 m2 g-1 ), large pore volumes (0.296-0.481 cm3 g-1 ), and excellent thermodynamic stability (up to 600 °C). Benefiting from these advantages, OMCTs serving as the electrode materials for supercapacitor exhibited superior supercapacitor performances, including high capacitance of 247 F g-1 at 0.2 A g-1 , satisfactory rate performance of 190 F g-1 at 5 A g-1 , and cyclability.
Collapse
Affiliation(s)
- Zhilin Liu
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun, Jilin, 130012, P. R. China
| | - Hailong Xiong
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun, Jilin, 130012, P. R. China
- Hefei National Laboratory for Physical Sciences at the Microscale, Collaborative Innovative Center of Chemistry for Energy Materials (iChEM), School of Chemistry and Materials Science and, National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei, Anhui, 230026, P. R. China
| | - Yaxiao Luo
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, Jilin, 130012, P. R. China
| | - Liangliang Zhang
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun, Jilin, 130012, P. R. China
| | - Kuo Hu
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, Jilin, 130012, P. R. China
| | - Ling Zhang
- State Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, Changchun, Jilin, 130012, P. R. China
| | - Yu Gao
- Key Laboratory of Physics and Technology for Advanced Batteries, Ministry of Education, Jilin University, Changchun, Jilin, 130012, P. R. China
| | - Zhen-An Qiao
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun, Jilin, 130012, P. R. China
| |
Collapse
|
15
|
Yin Y, Wang J, Li T, Hill JP, Rowan A, Sugahara Y, Yamauchi Y. Nanoarchitecturing Carbon Nanodot Arrays on Zeolitic Imidazolate Framework -Derived Cobalt -Nitrogen -Doped Carbon Nanoflakes toward Oxygen Reduction Electrocatalysts. ACS NANO 2021; 15:13240-13248. [PMID: 34370952 DOI: 10.1021/acsnano.1c02950] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Two-dimensional (2D) nanoporous heterostructured composites formed by uniformly coating individual monolayers with porous layers introduce unparalleled opportunities to improve and optimize the electrochemical performances of 2D materials. Here, an all-porous carbon heterostructure composed of 2D microporous carbon nanoflakes uniformly decorated with carbon nanodots has been developed. Interestingly, resol-F127 micelles self-assemble on the surface of zeolitic imidazolate framework (ZIF) nanoflakes in the form of a nanodot array, yielding a heterostructure. Hydrothermal treatment followed by carbonization under a nitrogen atmosphere causes conversion of the nanodot-nanoflake assembly into a carbon-based material composed of hollow carbon nanodots (CNDs) and microporous carbon nanoflakes (CNFs), that is, a CND@CNF composite. The combination of 2D microporous carbon nanoflakes with carbon hollow nanodots enhances exposure of the active sites and improves mass transfer in all directions (including through the nanoflakes). The use of cobalt (Co)-containing ZIF leads to the synthesis of a Co-Nx-doped CND@CNF composite, which exhibits oxygen reduction reaction electrocatalytic activity and long-term stability superior even to commercial Pt/C catalysts. This architecture-engineering strategy has been used to design and synthesize 2D heterostructures possessing high electrocatalytic efficiency and will be useful for future developments in important electrochemical energy storage and conversion applications.
Collapse
Affiliation(s)
- Yongqi Yin
- Department Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Physics and Electronic Engineering, Harbin Normal University, Harbin, 150025, China
- JST-ERATO Yamauchi Materials Space-Tectonics Project and International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan
| | - Jie Wang
- JST-ERATO Yamauchi Materials Space-Tectonics Project and International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan
- JST-ERATO Yamauchi Materials Space-Tectonics Project, Kagami Memorial Research Institute for Science and Technology, Waseda University, 2-8-26 Nishiwaseda, Shinjuku-ku, Tokyo 169-0051, Japan
| | - Tao Li
- JST-ERATO Yamauchi Materials Space-Tectonics Project and International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan
| | - Jonathan P Hill
- JST-ERATO Yamauchi Materials Space-Tectonics Project and International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan
| | - Alan Rowan
- Australian Institute for Bioengineering and Nanotechnology (AIBN) and School of Chemical Engineering, The University of Queensland, Brisbane, QLD 4072, Australia
| | - Yoshiyuki Sugahara
- JST-ERATO Yamauchi Materials Space-Tectonics Project, Kagami Memorial Research Institute for Science and Technology, Waseda University, 2-8-26 Nishiwaseda, Shinjuku-ku, Tokyo 169-0051, Japan
- Department of Applied Chemistry, School of Advanced Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan
| | - Yusuke Yamauchi
- JST-ERATO Yamauchi Materials Space-Tectonics Project and International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan
- JST-ERATO Yamauchi Materials Space-Tectonics Project, Kagami Memorial Research Institute for Science and Technology, Waseda University, 2-8-26 Nishiwaseda, Shinjuku-ku, Tokyo 169-0051, Japan
- Australian Institute for Bioengineering and Nanotechnology (AIBN) and School of Chemical Engineering, The University of Queensland, Brisbane, QLD 4072, Australia
| |
Collapse
|
16
|
Sun Y, Zhang M, Tan S, Song R. Hierarchical porous carbon materials synthesized from the castor oil/MgO solids for high-performance supercapacitors. NANOTECHNOLOGY 2021; 32:445601. [PMID: 34298535 DOI: 10.1088/1361-6528/ac1757] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/30/2021] [Accepted: 07/23/2021] [Indexed: 06/13/2023]
Abstract
A kind of biomass-based hierarchical porous carbons (HPCs) is easily synthesized by the direct pyrolysis of castor oil/MgO solids, in which the solids can be prepared by mixing appropriate amounts of MgO into castor oil. The morphology, microstructure, phase structure, textural property, surface element composition and thermal stability properties are studied for the achieved HPCs. It is demonstrated that the HPCs belong to a type of high-graphitization, graphene-like and foamed carbon materials with high specific surface area and wide pore size distribution. The HPC obtained at 900 °C (HPC-900) displays the highest specific surface area of 1013.17 m2g and more reasonable pore size distribution. Without the need of conductive agents, the HPC-900 exhibits a maximum capacitance (340 F g-1at 0.5 A g-1), excellent rate performance (70.1% of capacitance retention at high current density of 10 A g-1) and a remarkable long-term cycling stability (about 99% capacitance retention after 9000 cycles) in the aqueous electrolyte of 6 M KOH. Meanwhile, assembled as-prepared sample into symmetrical supercapacitor, the HPC-900 provides a high energy and power density, with 8.6 Wh kg-1and 426.7 W kg-1in 1 M Na2SO4, respectively. The HPCs prepared based on castor oil show high potential for the electrode materials of supercapacitors.
Collapse
Affiliation(s)
- Yue Sun
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| | - Mingyang Zhang
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| | - Shengnan Tan
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| | - Rongjun Song
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| |
Collapse
|
17
|
Electrochemical energy storage performance of 2D nanoarchitectured hybrid materials. Nat Commun 2021; 12:3563. [PMID: 34117228 PMCID: PMC8196154 DOI: 10.1038/s41467-021-23819-0] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2020] [Accepted: 04/28/2021] [Indexed: 11/21/2022] Open
Abstract
The fast-growing interest for two-dimensional (2D) nanomaterials is undermined by their natural restacking tendency, which severely limits their practical application. Novel porous heterostructures that coordinate 2D nanosheets with monolayered mesoporous scaffolds offer an opportunity to greatly expand the library of advanced materials suitable for electrochemical energy storage technologies.
Collapse
|
18
|
Park J, Lee J, Kim S, Hwang J. Graphene-Based Two-Dimensional Mesoporous Materials: Synthesis and Electrochemical Energy Storage Applications. MATERIALS (BASEL, SWITZERLAND) 2021; 14:2597. [PMID: 34065776 PMCID: PMC8156551 DOI: 10.3390/ma14102597] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/14/2021] [Revised: 05/10/2021] [Accepted: 05/14/2021] [Indexed: 02/06/2023]
Abstract
Graphene (G)-based two dimensional (2D) mesoporous materials combine the advantages of G, ultrathin 2D morphology, and mesoporous structures, greatly contributing to the improvement of power and energy densities of energy storage devices. Despite considerable research progress made in the past decade, a complete overview of G-based 2D mesoporous materials has not yet been provided. In this review, we summarize the synthesis strategies for G-based 2D mesoporous materials and their applications in supercapacitors (SCs) and lithium-ion batteries (LIBs). The general aspect of synthesis procedures and underlying mechanisms are discussed in detail. The structural and compositional advantages of G-based 2D mesoporous materials as electrodes for SCs and LIBs are highlighted. We provide our perspective on the opportunities and challenges for development of G-based 2D mesoporous materials. Therefore, we believe that this review will offer fruitful guidance for fabricating G-based 2D mesoporous materials as well as the other types of 2D heterostructures for electrochemical energy storage applications.
Collapse
Affiliation(s)
- Jongyoon Park
- Department of Energy Systems Research, Ajou University, 206 Worldcup-ro Yeongtong-gu, Suwon 16499, Korea; (J.P.); (J.L.)
| | - Jiyun Lee
- Department of Energy Systems Research, Ajou University, 206 Worldcup-ro Yeongtong-gu, Suwon 16499, Korea; (J.P.); (J.L.)
| | - Seongseop Kim
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Daejeon 34141, Korea;
| | - Jongkook Hwang
- Department of Chemical Engineering, Ajou University, Worldcupro 206, Suwon 16499, Korea
| |
Collapse
|
19
|
Zhang M, Sun Y, Song R. Hierarchical porous carbon materials obtained by Cu-Al double hydroxide templates with high gravimetric and volumetric capacitance. NANOTECHNOLOGY 2021; 32:235303. [PMID: 33631738 DOI: 10.1088/1361-6528/abe9e8] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2021] [Accepted: 02/25/2021] [Indexed: 06/12/2023]
Abstract
The hard-template method belongs to an effective route for preparing porous carbon materials with ideal hierarchical pores. In this work, a kind of hierarchical porous carbon (HPC) with high gravimetric and volumetric capacitance is fabricated by the use of Al-Cu double hydroxides (Al-Cu DHs) as hard templates and polyethylene glycol-200 as carbon precursors. It is found that the Al/Cu molar ratio has a profound influence on the morphology and composition of Al-Cu DHs and the obtained hierarchical porous architecture of HPCs owing to the template and catalyst functions of both Cu and Al2O3. For Al/Cu molar ratios of 5:1 and 7:1, the prepared HPC-05 and HPC-07 display a large specific surface area and appropriate hierarchical porous architecture. They can be used as the electrode materials of supercapacitors without any activation. The HPC-05 exhibits gravimetric capacitance (296.9 F g-1) and high volumetric capacitance (183.3 F cm-3). Moreover, the capacitance retention is 105% in 1 M Na2SO4electrolyte with an ultrahigh gravimetric energy density of 16.32 W h kg-1and a volumetric energy density of 10.09 W h l-1. This paper provides a tunable double-hydroxide-template way to construct HPC materials with high gravimetric and volume capacitance.
Collapse
Affiliation(s)
- Mingyang Zhang
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| | - Yue Sun
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| | - Rongjun Song
- Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, People's Republic of China
| |
Collapse
|
20
|
Yan Y, Chen G, She P, Zhong G, Yan W, Guan BY, Yamauchi Y. Mesoporous Nanoarchitectures for Electrochemical Energy Conversion and Storage. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2004654. [PMID: 32964570 DOI: 10.1002/adma.202004654] [Citation(s) in RCA: 52] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Revised: 08/23/2020] [Indexed: 06/11/2023]
Abstract
Mesoporous materials have attracted considerable attention because of their distinctive properties, including high surface areas, large pore sizes, tunable pore structures, controllable chemical compositions, and abundant forms of composite materials. During the last decade, there has been increasing research interest in constructing advanced mesoporous nanomaterials possessing short and open channels with efficient mass diffusion capability and rich accessible active sites for electrochemical energy conversion and storage. Here, the synthesis, structures, and energy-related applications of mesoporous nanomaterials are the main focus. After a brief summary of synthetic methods of mesoporous nanostructures, the delicate design and construction of mesoporous nanomaterials are described in detail through precise tailoring of the particle sizes, pore sizes, and nanostructures. Afterward, their applications as electrode materials for lithium-ion batteries, supercapacitors, water-splitting electrolyzers, and fuel cells are discussed. Finally, the possible development directions and challenges of mesoporous nanomaterials for electrochemical energy conversion and storage are proposed.
Collapse
Affiliation(s)
- Yuxing Yan
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
| | - Guangrui Chen
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
| | - Peihong She
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
- Joint Research Center for Future Materials, International Center of Future Science, Jilin University, Qianjin Street 2699, Changchun, 130012, P. R. China
| | - Guiyuan Zhong
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
| | - Wenfu Yan
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
| | - Bu Yuan Guan
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
- Joint Research Center for Future Materials, International Center of Future Science, Jilin University, Qianjin Street 2699, Changchun, 130012, P. R. China
| | - Yusuke Yamauchi
- International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki, 305-0044, Japan
- School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, QLD, 4072, Australia
| |
Collapse
|
21
|
Tu K, Tranca D, Rodríguez-Hernández F, Jiang K, Huang S, Zheng Q, Chen MX, Lu C, Su Y, Chen Z, Mao H, Yang C, Jiang J, Liang HW, Zhuang X. A Novel Heterostructure Based on RuMo Nanoalloys and N-doped Carbon as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2005433. [PMID: 33063406 DOI: 10.1002/adma.202005433] [Citation(s) in RCA: 65] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2020] [Indexed: 05/27/2023]
Abstract
Heterostructures exhibit considerable potential in the field of energy conversion due to their excellent interfacial charge states in tuning the electronic properties of different components to promote catalytic activity. However, the rational preparation of heterostructures with highly active heterosurfaces remains a challenge because of the difficulty in component tuning, morphology control, and active site determination. Herein, a novel heterostructure based on a combination of RuMo nanoalloys and hexagonal N-doped carbon nanosheets is designed and synthesized. In this protocol, metal-containing anions and layered double hydroxides are employed to control the components and morphology of heterostructures, respectively. Accordingly, the as-made RuMo-nanoalloys-embedded hexagonal porous carbon nanosheets are promising for the hydrogen evolution reaction (HER), resulting in an extremely small overpotential (18 mV), an ultralow Tafel slope (25 mV dec-1 ), and a high turnover frequency (3.57 H2 s-1 ) in alkaline media, outperforming current Ru-based electrocatalysts. First-principle calculations based on typical 2D N-doped carbon/RuMo nanoalloys heterostructures demonstrate that introducing N and Mo atoms into C and Ru lattices, respectively, triggers electron accumulation/depletion regions at the heterosurface and consequently reduces the energy barrier for the HER. This work presents a convenient method for rational fabrication of carbon-metal heterostructures for highly efficient electrocatalysis.
Collapse
Affiliation(s)
- Kejun Tu
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | - Diana Tranca
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | | | - Kaiyue Jiang
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | - Senhe Huang
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | - Qi Zheng
- School of Materials Science and Engineering, Southeast University, 2 Dongnan University RD., Nanjing, Jiangsu, 211189, China
| | - Ming-Xi Chen
- Hefei National Laboratory for Physical Sciences at the Microscale, Department of Chemistry, University of Science and Technology of China, 96 Jintai RD., Hefei, Anhui, 230026, China
| | - Chenbao Lu
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | - Yuezeng Su
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | - Zhenying Chen
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
- College of Chemistry and Molecular Engineering, Zhengzhou University, 100 Science Avenue, Zhengzhou, Henan, 450001, China
| | - Haiyan Mao
- Department of Chemical and Biomolecular Engineering, University of California, Berkeley, CA, 94720, USA
- College of Materials Science and Engineering, Nanjing Forestry University, 159 Longpan Road, Nanjing, 210037, China
| | - Chongqing Yang
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| | - Jinyang Jiang
- School of Materials Science and Engineering, Southeast University, 2 Dongnan University RD., Nanjing, Jiangsu, 211189, China
| | - Hai-Wei Liang
- Hefei National Laboratory for Physical Sciences at the Microscale, Department of Chemistry, University of Science and Technology of China, 96 Jintai RD., Hefei, Anhui, 230026, China
| | - Xiaodong Zhuang
- The Meso-Entropy Matter Lab, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, Shanghai Jiao Tong University, 800 Dongchuan RD., Shanghai, 200240, China
| |
Collapse
|
22
|
High surface area N/O co-doped carbon materials: Selective electrocatalysts for O2 reduction to H2O2. Catal Today 2020. [DOI: 10.1016/j.cattod.2019.06.034] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
23
|
Kim S, Hwang J, Lee J, Lee J. Polymer blend directed anisotropic self-assembly toward mesoporous inorganic bowls and nanosheets. SCIENCE ADVANCES 2020; 6:eabb3814. [PMID: 32851176 PMCID: PMC7423385 DOI: 10.1126/sciadv.abb3814] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/26/2020] [Accepted: 07/01/2020] [Indexed: 05/02/2023]
Abstract
Anisotropic mesoporous inorganic materials have attracted great interest due to their unique and intriguing properties, yet their controllable synthesis still remains a great challenge. Here, we develop a simple synthesis approach toward mesoporous inorganic bowls and two-dimensional (2D) nanosheets by combining block copolymer (BCP)-directed self-assembly with asymmetric phase migration in ternary-phase blends. The homogeneous blend solution spontaneously self-assembles to anisotropically stacked hybrids as the solvent evaporates. Two minor phases-BCP/inorganic precursor and homopolystyrene (hPS)-form closely stacked, Janus domains that are dispersed/confined in the major homopoly(methyl methacrylate) (hPMMA) matrix. hPS phases are partially covered by BCP-rich phases, where ordered mesostructures develop. With increasing the relative amount of hPS, the anisotropic shape evolves from bowls to 2D nanosheets. Benefiting from the unique bowl-like morphology, the resulting transition metal oxides show promise as high-performance anodes in potassium-ion batteries.
Collapse
Affiliation(s)
- Seongseop Kim
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Daejeon 34141, Republic of Korea
| | - Jongkook Hwang
- Department of Chemical Engineering, Ajou University, Worldcupro 206, Suwon 16499, Republic of Korea
| | - Jisung Lee
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Daejeon 34141, Republic of Korea
| | - Jinwoo Lee
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Daejeon 34141, Republic of Korea
- Corresponding author.
| |
Collapse
|
24
|
Wang F, Chen L, Li H, Duan G, He S, Zhang L, Zhang G, Zhou Z, Jiang S. N-doped honeycomb-like porous carbon towards high-performance supercapacitor. CHINESE CHEM LETT 2020. [DOI: 10.1016/j.cclet.2020.02.020] [Citation(s) in RCA: 65] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
25
|
Tian J, Zhang A, Liu R, Huang W, Yuan Z, Zheng R, Wei D, Liu J. Preparation of CoS 2 supported flower-like NiFe layered double hydroxides nanospheres for high-performance supercapacitors. J Colloid Interface Sci 2020; 579:607-618. [PMID: 32645528 DOI: 10.1016/j.jcis.2020.06.086] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2020] [Revised: 06/13/2020] [Accepted: 06/21/2020] [Indexed: 11/27/2022]
Abstract
Layered double hydroxides (LDHs) are a kind of classic pseudocapacitive materials with lamellar structure and large specific surface area, which have attracted swinging attention in the electrochemical energy storage area. The CoS2@Ni is synthesized through a hydrothermal process, followed by surface generation of the flower-like nickel-iron layered double hydroxide (NiFe-LDH) nanospheres through a hydrothermal process, which is directly used to design a binder-free electrode with a splendid capacitance capability. The as-synthesized NiFe-LDH@CoS2@Ni electrode presents an outstanding specific capacitance of 11.28 F cm-2 (3880 F g-1) at 2 mA cm-2 (1.17 A g-1) in a three electrodes system. Also, the all-solid-state asymmetric supercapacitor (ASC) is combined utilizing the NiFe-LDH@CoS2@Ni hybrid as the positive electrodes and active carbon covered Ni foam as negative electrodes, respectively. The as-fabricated ASC exhibits a high energy density of 15.84 Wh kg-1 at the power density of 375.16 W kg-1 and can be able to lighten a blue LED indicator for more than 30 min, revealing that the prepared NiFe-LDH@CoS2@Ni owns great potential in the aspect of practical applications. Therefore, the prepared NiFe-LDH@CoS2@Ni with outstanding electrochemical properties could be applied for high-performance supercapacitors.
Collapse
Affiliation(s)
- Jinmi Tian
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, China
| | - Aitang Zhang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, China
| | - Rui Liu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, China
| | - Weiguo Huang
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, China
| | - Zhen Yuan
- College of Material Science and Engineering, Linyi University, Linyi 276000, Shandong, China.
| | - Rongkun Zheng
- College of Material Science and Engineering, Linyi University, Linyi 276000, Shandong, China
| | - Di Wei
- College of Material Science and Engineering, Linyi University, Linyi 276000, Shandong, China
| | - Jingquan Liu
- College of Materials Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, China; College of Material Science and Engineering, Linyi University, Linyi 276000, Shandong, China.
| |
Collapse
|
26
|
Tu K, Zou L, Yang C, Su Y, Lu C, Zhu J, Zhang F, Ke C, Zhuang X. Ionic Polyimide Derived Porous Carbon Nanosheets as High-Efficiency Oxygen Reduction Catalysts for Zn-Air Batteries. Chemistry 2020; 26:6525-6534. [PMID: 31788872 DOI: 10.1002/chem.201904769] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2019] [Revised: 11/28/2019] [Indexed: 11/11/2022]
Abstract
Two-dimensional (2D) porous carbon nanosheets (2DPCs) have attracted great attention for their good porosity and long-distance conductivity. Factors such as templates, precursors, and carbonization-activation methods, directly determine their performance. However, rational design and preparation of porous carbon materials with controlled 2D morphology and heteroatom dopants remains a challenge. Therefore, an ionic polyimide with both sp2 - and sp3 -hybridized nitrogen atoms was prepared as a precursor for fabricating N-doped hexagonal porous carbon nanosheets through a hard-template approach. Because of the large surface area and efficient charge-mass transport, the resulting activated 2D porous carbon nanosheets (2DPCs-a) displayed promising electrocatalytic properties for oxygen reduction reaction (ORR) in alkaline and acidic media, such as ultralow half-wave potential (0.83 vs. 0.84 V of Pt/C) and superior limiting current density (5.42 vs. 5.14 mA cm-2 of Pt/C). As air cathodes in Zn-air batteries, the as-developed 2DPCs-a exhibited long stability and high capacity (up to 614 mA h g-1 ), which are both higher than those of commercial Pt/C. This work provides a convenient method for controllable and scalable 2DPCs fabrication as well as new opportunities to develop high-efficiency electrocatalysts for ORR and Zn-air batteries.
Collapse
Affiliation(s)
- Kejun Tu
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China.,The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Lingyi Zou
- The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Chongqing Yang
- The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Yuezeng Su
- School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Chenbao Lu
- The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Jinhui Zhu
- The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Fan Zhang
- The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Changchun Ke
- School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
| | - Xiaodong Zhuang
- The Meso-Entropy Matter Lab, School of Chemistry and Chemical Engineering, State Key Laboratory of Metal Matrix Composites, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China.,Jiangsu Key Laboratory of Environmentally Friendly Polymeric Materials, School of Materials Science and Engineering, Changzhou University, Changzhou, 213164, P. R. China
| |
Collapse
|
27
|
Ma Y, Gao J, Chen X, Kong L. Design of Ultra‐Microporous Carbons by Interpenetrating MF Prepolymer into PAAS Networks at Molecule Level for Enhanced Electrochemical Performance. ChemElectroChem 2020. [DOI: 10.1002/celc.201901942] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Yan‐Dong Ma
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous MetalsLanzhou University of Technology Lanzhou 730050 P. R. China
| | - Jian‐Fei Gao
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous MetalsLanzhou University of Technology Lanzhou 730050 P. R. China
| | - Xi‐Wen Chen
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous MetalsLanzhou University of Technology Lanzhou 730050 P. R. China
| | - Ling‐Bin Kong
- State Key Laboratory of Advanced Processing and Recycling of Non-ferrous MetalsLanzhou University of Technology Lanzhou 730050 P. R. China
- School of Materials Science and EngineeringLanzhou University of Technology Lanzhou 730050 P. R. China
| |
Collapse
|
28
|
Chen Y, Liu Y, Dong Y, Xia Y, Hung CT, Liu L, Bi W, Li W. Synthesis of sandwich-like graphene@mesoporous nitrogen-doped carbon nanosheets for application in high-performance supercapacitors. NANOTECHNOLOGY 2020; 31:024001. [PMID: 31550701 DOI: 10.1088/1361-6528/ab4779] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Nanostructured mesoporous carbon materials have been an attractive material for electrochemical energy storage in the recent decades. However, the controllable synthesis of two-dimensional mesoporous carbon with tunable thickness and desired pore structure is highly challenging. Here, a series of graphene@mesoporous nitrogen-doped carbon (denoted as G@mesoNC) core-shell structured nanosheets with tunable thicknesses have been fabricated via a sample hydrothermal method by using cellulose as the green and cheap carbon precursor. The resultant G@mesoNC nanosheets exhibit a distinct sandwich-like structure with tunable thicknesses (from 10 to 30 nm), a large surface area (562 m2 g-1), a narrow pore size distribution (2.3 nm) and a high nitrogen content (7.95%). Significantly, when being used as the electrode for supercapaciors, the resultant G@mesoNC nanosheets showcase a high specific capacitance of 264 F g-1. Most importantly, there is no substantial capacitance decay after 2500 cycles, indicating the perfect cyclic stability of G@mesoNC nanosheets. Our method paves a new way for synthesizing carbon electrodes for energy storage.
Collapse
Affiliation(s)
- Yan Chen
- Department of Chemistry, Laboratory of Advanced Materials, Shanghai Key Lab of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai 200433, People's Republic of China
| | | | | | | | | | | | | | | |
Collapse
|
29
|
Li C, Li Q, Kaneti YV, Hou D, Yamauchi Y, Mai Y. Self-assembly of block copolymers towards mesoporous materials for energy storage and conversion systems. Chem Soc Rev 2020; 49:4681-4736. [DOI: 10.1039/d0cs00021c] [Citation(s) in RCA: 170] [Impact Index Per Article: 42.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
This paper reviews the progress in the field of block copolymer-templated mesoporous materials, including synthetic methods, morphological and pore size control and their potential applications in energy storage and conversion devices.
Collapse
Affiliation(s)
- Chen Li
- School of Chemistry and Chemical Engineering
- Frontiers Science Center for Transformative Molecules
- Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing
- Shanghai Jiao Tong University
- Shanghai 200242
| | - Qian Li
- School of Chemistry and Chemical Engineering
- Frontiers Science Center for Transformative Molecules
- Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing
- Shanghai Jiao Tong University
- Shanghai 200242
| | - Yusuf Valentino Kaneti
- International Center for Materials Nanoarchitectonics (WPI-MANA)
- National Institute for Materials Science (NIMS)
- Ibaraki 305-0044
- Japan
| | - Dan Hou
- School of Chemistry and Chemical Engineering
- Frontiers Science Center for Transformative Molecules
- Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing
- Shanghai Jiao Tong University
- Shanghai 200242
| | - Yusuke Yamauchi
- School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology (AIBN)
- The University of Queensland
- Brisbane
- Australia
- Key Laboratory of Marine Chemistry Theory and Technology
| | - Yiyong Mai
- School of Chemistry and Chemical Engineering
- Frontiers Science Center for Transformative Molecules
- Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing
- Shanghai Jiao Tong University
- Shanghai 200242
| |
Collapse
|
30
|
Determination of boundary conditions for highly efficient separation of magnesium and lithium from salt lake brine by reaction-coupled separation technology. Sep Purif Technol 2019. [DOI: 10.1016/j.seppur.2019.115813] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
31
|
Qiu Y, Hou M, Gao J, Zhai H, Liu H, Jin M, Liu X, Lai L. One-Step Synthesis of Monodispersed Mesoporous Carbon Nanospheres for High-Performance Flexible Quasi-Solid-State Micro-Supercapacitors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2019; 15:e1903836. [PMID: 31539210 DOI: 10.1002/smll.201903836] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2019] [Revised: 09/02/2019] [Indexed: 06/10/2023]
Abstract
Cost-effective synthesis of carbon nanospheres with a desirable mesoporous network for diversified energy storage applications remains a challenge. Herein, a direct templating strategy is developed to fabricate monodispersed N-doped mesoporous carbon nanospheres (NMCSs) with an average particle size of 100 nm, a pore diameter of 4 nm, and a specific area of 1093 m2 g-1 . Hexadecyl trimethyl ammonium bromide and tetraethyl orthosilicate not only play key roles in the evolution of mesopores but also guide the assembly of phenolic resins to generate carbon nanospheres. Benefiting from the high surface area and optimum mesopore structure, NMCSs deliver a large specific capacitance up to 433 F g-1 in 1 m H2 SO4 . The NMCS electrodes-based symmetric sandwich supercapacitor has an output voltage of 1.4 V in polyvinyl alcohol/H2 SO4 gel electrolyte and delivers an energy density of 10.9 Wh kg-1 at a power density of 14014.5 W kg-1 . Notably, NMCSs can be directly applied through the mask-assisted casting technique by a doctor blade to fabricate micro-supercapacitors. The micro-supercapacitors exhibit excellent mechanical flexibility, long-term stability, and reliable power output.
Collapse
Affiliation(s)
- Yongting Qiu
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| | - Mingzhen Hou
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| | - Jingchang Gao
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| | - Haili Zhai
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| | - Haimin Liu
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| | - Mengmeng Jin
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| | - Xiang Liu
- College of Energy Science and Engineering, Nanjing Tech University, 30 Puzhu South Road, Nanjing, 211816, China
| | - Linfei Lai
- Key Laboratory of Flexible Electronics & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University, 5 XinMofan Road, Nanjing, 210009, China
| |
Collapse
|
32
|
Qian O, Lin D, Zhao X, Han F. Vertically Oriented Grid-like Reduced Graphene Oxide for Ultrahigh Power Supercapacitor. CHEM LETT 2019. [DOI: 10.1246/cl.190218] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Affiliation(s)
- Ou Qian
- Key Laboratory of Materials Physics, Anhui Key Laboratory of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, P. R. China
- University of Science and Technology of China, Hefei 230026, P. R. China
| | - Dou Lin
- Key Laboratory of Materials Physics, Anhui Key Laboratory of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, P. R. China
| | - Xianglong Zhao
- Key Laboratory of Materials Physics, Anhui Key Laboratory of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, P. R. China
| | - Fangming Han
- Key Laboratory of Materials Physics, Anhui Key Laboratory of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, P. R. China
| |
Collapse
|
33
|
Tian H, Qin J, Hou D, Li Q, Li C, Wu Z, Mai Y. General Interfacial Self‐Assembly Engineering for Patterning Two‐Dimensional Polymers with Cylindrical Mesopores on Graphene. Angew Chem Int Ed Engl 2019; 58:10173-10178. [DOI: 10.1002/anie.201903684] [Citation(s) in RCA: 58] [Impact Index Per Article: 11.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2019] [Revised: 04/28/2019] [Indexed: 11/07/2022]
Affiliation(s)
- Hao Tian
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Jieqiong Qin
- Dalian National Laboratory for Clean EnergyDalian Institute of Chemical PhysicsChinese Academy of Sciences 457 Zhongshan Road Dalian 116023 China
- University of Chinese Academy of Sciences 19 A Yuquan Road, Shijingshan District Beijing 100049 China
| | - Dan Hou
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Qian Li
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Chen Li
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Zhong‐Shuai Wu
- Dalian National Laboratory for Clean EnergyDalian Institute of Chemical PhysicsChinese Academy of Sciences 457 Zhongshan Road Dalian 116023 China
| | - Yiyong Mai
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| |
Collapse
|
34
|
Tian H, Qin J, Hou D, Li Q, Li C, Wu Z, Mai Y. General Interfacial Self‐Assembly Engineering for Patterning Two‐Dimensional Polymers with Cylindrical Mesopores on Graphene. Angew Chem Int Ed Engl 2019. [DOI: 10.1002/ange.201903684] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Affiliation(s)
- Hao Tian
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Jieqiong Qin
- Dalian National Laboratory for Clean EnergyDalian Institute of Chemical PhysicsChinese Academy of Sciences 457 Zhongshan Road Dalian 116023 China
- University of Chinese Academy of Sciences 19 A Yuquan Road, Shijingshan District Beijing 100049 China
| | - Dan Hou
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Qian Li
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Chen Li
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| | - Zhong‐Shuai Wu
- Dalian National Laboratory for Clean EnergyDalian Institute of Chemical PhysicsChinese Academy of Sciences 457 Zhongshan Road Dalian 116023 China
| | - Yiyong Mai
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal AgeingShanghai Jiao Tong University 800 Dongchuan Road Shanghai 200240 China
| |
Collapse
|
35
|
Zhou J, Xu L, Li L, Li X. Polytetrafluoroethylene-assisted N/F co-doped hierarchically porous carbon as a high performance electrode for supercapacitors. J Colloid Interface Sci 2019; 545:25-34. [DOI: 10.1016/j.jcis.2019.03.010] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2018] [Revised: 03/02/2019] [Accepted: 03/04/2019] [Indexed: 11/26/2022]
|
36
|
Allah AE, Yamauchi Y, Wang J, Bando Y, Tan H, Farghali AA, Khedr MH, Alshehri A, Alghamdi YG, Martin D, Wahab MA, Hossain MSA, Nanjundan AK. Soft‐Templated Synthesis of Sheet‐Like Nanoporous Nitrogen‐Doped Carbons for Electrochemical Supercapacitors. ChemElectroChem 2019. [DOI: 10.1002/celc.201900151] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Abeer Enaiet Allah
- Chemistry Department, Faculty of ScienceBeni-Suef University Beni-Suef 62511 Egypt
| | - Yusuke Yamauchi
- Key Laboratory of Eco-chemical Engineering College of Chemistry and Molecular EngineeringQingdao University of Science and Technology Qingdao 266042 China
- Australian Institute for Bioengineering and Nanotechnology (AIBN)The University of Queensland Brisbane QLD 4072 Australia
- School of Chemical Engineering, Faculty of Engineering Architecture and Information Technology (EAIT)The University of Queensland Brisbane QLD 4072 Australia
- Department of Plant & Environmental New ResourcesKyung Hee University 1732 Deogyeong-daero Giheung-gu, Yongin-si, Gyeonggi-do 446-701 South Korea
| | - Jie Wang
- International Research Center for Materials Nanoarchitechtonics (WPI-MANA)National Institute for Materials Science (NIMS) 1-1 Namiki Tsukuba, Ibaraki 305-0044 Japan
| | - Yoshio Bando
- International Research Center for Materials Nanoarchitechtonics (WPI-MANA)National Institute for Materials Science (NIMS) 1-1 Namiki Tsukuba, Ibaraki 305-0044 Japan
| | - Haibo Tan
- International Research Center for Materials Nanoarchitechtonics (WPI-MANA)National Institute for Materials Science (NIMS) 1-1 Namiki Tsukuba, Ibaraki 305-0044 Japan
| | - Ahmed A. Farghali
- Materials Science and Nanotechnology Department Faculty of Postgraduate Studies for Advanced Sciences (PSAS)Beni-Suef University Beni-Suef 62511 Egypt
| | - Mohamed Hamdy Khedr
- Materials Science and Nanotechnology Department Faculty of Postgraduate Studies for Advanced Sciences (PSAS)Beni-Suef University Beni-Suef 62511 Egypt
| | - Abdulmohsen Alshehri
- Department of ChemistryKing Abdulaziz University P.O. Box. 80203 Jeddah 21589 Saudi Arabia
| | - Yousef Gamaan Alghamdi
- Department of ChemistryKing Abdulaziz University P.O. Box. 80203 Jeddah 21589 Saudi Arabia
| | - Darren Martin
- Australian Institute for Bioengineering and Nanotechnology (AIBN)The University of Queensland Brisbane QLD 4072 Australia
| | - Mohammad A. Wahab
- Faculty of Science, Health, Education and EngineeringUniversity of the Sunshine Coast Maroochydore DC QLD 4558 Australia
| | - Md. Shahriar A. Hossain
- Australian Institute for Bioengineering and Nanotechnology (AIBN)The University of Queensland Brisbane QLD 4072 Australia
- School of Mechanical & Mining Engineering Faculty of Engineering Architecture and Information Technology (EAIT)The University of Queensland Brisbane QLD 4072 Australia
| | - Ashok Kumar Nanjundan
- Australian Institute for Bioengineering and Nanotechnology (AIBN)The University of Queensland Brisbane QLD 4072 Australia
- School of Chemical Engineering, Faculty of Engineering Architecture and Information Technology (EAIT)The University of Queensland Brisbane QLD 4072 Australia
| |
Collapse
|
37
|
Liu H, Zhai DD, Wang M, Liu JS, Chen XY, Zhang ZJ. Urea-Modified Phenol-Formaldehyde Resins for the Template-Assisted Synthesis of Nitrogen-Doped Carbon Nanosheets as Electrode Material for Supercapacitors. ChemElectroChem 2019. [DOI: 10.1002/celc.201801855] [Citation(s) in RCA: 27] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Affiliation(s)
- Hao Liu
- School of Chemistry and Chemical Engineering Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical Engineering; Hefei University of Technology; Hefei, Anhui 230009 P. R. China
| | - Duo D. Zhai
- School of Chemistry and Chemical Engineering Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical Engineering; Hefei University of Technology; Hefei, Anhui 230009 P. R. China
| | - Min Wang
- School of Chemistry and Chemical Engineering Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical Engineering; Hefei University of Technology; Hefei, Anhui 230009 P. R. China
| | - Jin S. Liu
- Anhui Puhe Electronics Co. Ltd; Anqing 246501, Anhui Province P. R. China
| | - Xiang Y. Chen
- School of Chemistry and Chemical Engineering Anhui Key Laboratory of Controllable Chemistry Reaction & Material Chemical Engineering; Hefei University of Technology; Hefei, Anhui 230009 P. R. China
| | - Zhong J. Zhang
- School of Chemistry and Chemical Engineering Anhui Province Key Laboratory of Environment-Friendly Polymer Materials; Anhui University; Hefei, Anhui 230601 P. R. China
| |
Collapse
|
38
|
Liu X, Xi X, Chen C, Liu F, Wu D, Wang L, Ji W, Su Y, Liu R. Ordered mesoporous carbon-covered carbonized silk fabrics for flexible electrochemical dopamine detection. J Mater Chem B 2019; 7:2145-2150. [DOI: 10.1039/c8tb03242d] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
Abstract
Flexible dopamine sensors were fabricated with ordered mesoporous carbon-covered carbonized silk fabrics (OMC/CSFs) as the working electrodes, which exhibited high sensitivity, good selectivity, a large linear detection range of 0.2–80 μM, and a low limit detection of 0.11 μM.
Collapse
Affiliation(s)
- Xiongyu Liu
- National Engineering Lab for TFT-LCD Materials and Technologies
- Department of Electronic Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| | - Xin Xi
- National Engineering Lab for TFT-LCD Materials and Technologies
- Department of Electronic Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| | - Changlong Chen
- State Key Laboratory for Mechanical Behavior of Materials
- Xi’an Jiaotong University
- Xi’an
- P. R. China
| | - Feng Liu
- State Key Laboratory for Mechanical Behavior of Materials
- Xi’an Jiaotong University
- Xi’an
- P. R. China
| | - Dongqing Wu
- School of Chemistry and Chemical Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| | - Laiyu Wang
- National Engineering Lab for TFT-LCD Materials and Technologies
- Department of Electronic Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| | - Wei Ji
- National Engineering Lab for TFT-LCD Materials and Technologies
- Department of Electronic Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| | - Yuezeng Su
- National Engineering Lab for TFT-LCD Materials and Technologies
- Department of Electronic Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| | - Ruili Liu
- National Engineering Lab for TFT-LCD Materials and Technologies
- Department of Electronic Engineering
- Shanghai Jiao Tong University
- Shanghai
- P. R. China
| |
Collapse
|